IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
platform_get_irq() already prints an error message.
Also platform_get_irq() can never return 0, so lets fix the condition
now that we are at it.
Found by cocci:
drivers/media/platform/st/stm32/stm32-dcmipp/dcmipp-core.c:444:3-10: line 444 is redundant because platform_get_irq() already prints an error
Link: https://lore.kernel.org/linux-media/20240429-fix-cocci-v3-6-3c4865f5a4b0@chromium.org
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Replace ternary inline selection of f1 and f2 min max values with min()
and max() helper functions for the sake of readability and to make
coccinelle happier
drivers/media/usb/go7007/go7007-fw.c:1292:14-15: WARNING opportunity for max()
drivers/media/usb/go7007/go7007-fw.c:1293:14-15: WARNING opportunity for min()
Link: https://lore.kernel.org/linux-media/20240429-fix-cocci-v3-5-3c4865f5a4b0@chromium.org
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The struct resource end field signifies the end address not the
relative offset from the start field i.e size == (end - start) + 1.
Amend the .end field to specify the end address not the relative size
from the offset as is currently given.
Fixes cocci check:
drivers/media/pci/mgb4/mgb4_regs.c:13:22-25: WARNING: Suspicious code. resource_size is maybe missing with res
Link: https://lore.kernel.org/linux-media/20240429-fix-cocci-v3-1-3c4865f5a4b0@chromium.org
Reviewed-by: Martin Tůma <martin.tuma@digiteqautomotive.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
When building for LoongArch with clang 18.0.0, the stack usage of
probe() is larger than the allowed 2048 bytes:
drivers/media/dvb-frontends/mxl5xx.c:1698:12: warning: stack frame size (2368) exceeds limit (2048) in 'probe' [-Wframe-larger-than]
1698 | static int probe(struct mxl *state, struct mxl5xx_cfg *cfg)
| ^
1 warning generated.
This is the result of the linked LLVM commit, which changes how the
arrays of structures in config_ts() get handled with
CONFIG_INIT_STACK_ZERO and CONFIG_INIT_STACK_PATTERN, which causes the
above warning in combination with inlining, as config_ts() gets inlined
into probe().
This warning can be easily fixed by moving the array of structures off
of the stackvia 'static const', which is a better location for these
variables anyways because they are static data that is only ever read
from, never modified, so allocating the stack space is wasteful.
This drops the stack usage from 2368 bytes to 256 bytes with the same
compiler and configuration.
Link: https://lore.kernel.org/linux-media/20240111-dvb-mxl5xx-move-structs-off-stack-v1-1-ca4230e67c11@kernel.org
Cc: stable@vger.kernel.org
Closes: https://github.com/ClangBuiltLinux/linux/issues/1977
Link: afe8b93ffd
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
If, when waiting for a transmit to finish, the wait is interrupted,
then you might get a "transmit timed out" message, even though the
transmit was interrupted and did not actually time out.
Set transmit_in_progress_aborted to true if the
wait_for_completion_killable() call was interrupted and ensure
that the transmit is properly marked as ABORTED.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reported-by: Yang, Chenyuan <cy54@illinois.edu>
Closes: https://lore.kernel.org/linux-media/PH7PR11MB57688E64ADE4FE82E658D86DA09EA@PH7PR11MB5768.namprd11.prod.outlook.com/
Fixes: 590a8e564c6e ("media: cec: abort if the current transmit was canceled")
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Keep track if cec_claim_log_addrs() is running, and return -EBUSY
if it is when calling CEC_ADAP_S_LOG_ADDRS.
This prevents a case where cec_claim_log_addrs() could be called
while it was still in progress.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reported-by: Yang, Chenyuan <cy54@illinois.edu>
Closes: https://lore.kernel.org/linux-media/PH7PR11MB57688E64ADE4FE82E658D86DA09EA@PH7PR11MB5768.namprd11.prod.outlook.com/
Fixes: ca684386e6e2 ("[media] cec: add HDMI CEC framework (api)")
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Do not check for !data->completed, just always call
cancel_delayed_work_sync(). This fixes a small race condition.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reported-by: Yang, Chenyuan <cy54@illinois.edu>
Closes: https://lore.kernel.org/linux-media/PH7PR11MB57688E64ADE4FE82E658D86DA09EA@PH7PR11MB5768.namprd11.prod.outlook.com/
Fixes: 490d84f6d73c ("media: cec: forgot to cancel delayed work")
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Modify the code so it can be compiled tested in configurations that do
not have ACPI enabled.
It fixes the following errors:
drivers/media/pci/intel/ipu-bridge.c:103:30: error: implicit declaration of function ‘acpi_device_handle’; did you mean ‘acpi_fwnode_handle’? [-Werror=implicit-function-declaration]
drivers/media/pci/intel/ipu-bridge.c:103:30: warning: initialization of ‘acpi_handle’ {aka ‘void *’} from ‘int’ makes pointer from integer without a cast [-Wint-conversion]
drivers/media/pci/intel/ipu-bridge.c:110:17: error: implicit declaration of function ‘for_each_acpi_dev_match’ [-Werror=implicit-function-declaration]
drivers/media/pci/intel/ipu-bridge.c:110:74: error: expected ‘;’ before ‘for_each_acpi_consumer_dev’
drivers/media/pci/intel/ipu-bridge.c:104:29: warning: unused variable ‘consumer’ [-Wunused-variable]
drivers/media/pci/intel/ipu-bridge.c:103:21: warning: unused variable ‘handle’ [-Wunused-variable]
drivers/media/pci/intel/ipu-bridge.c:166:38: error: invalid use of undefined type ‘struct acpi_device’
drivers/media/pci/intel/ipu-bridge.c:185:43: error: invalid use of undefined type ‘struct acpi_device’
drivers/media/pci/intel/ipu-bridge.c:191:30: error: invalid use of undefined type ‘struct acpi_device’
drivers/media/pci/intel/ipu-bridge.c:196:30: error: invalid use of undefined type ‘struct acpi_device’
drivers/media/pci/intel/ipu-bridge.c:202:30: error: invalid use of undefined type ‘struct acpi_device’
drivers/media/pci/intel/ipu-bridge.c:223:31: error: invalid use of undefined type ‘struct acpi_device’
drivers/media/pci/intel/ipu-bridge.c:236:18: error: implicit declaration of function ‘acpi_get_physical_device_location’ [-Werror=implicit-function-declaration]
drivers/media/pci/intel/ipu-bridge.c:236:56: error: invalid use of undefined type ‘struct acpi_device’
drivers/media/pci/intel/ipu-bridge.c:238:31: error: invalid use of undefined type ‘struct acpi_device’
drivers/media/pci/intel/ipu-bridge.c:256:31: error: invalid use of undefined type ‘struct acpi_device’
drivers/media/pci/intel/ipu-bridge.c:275:31: error: invalid use of undefined type ‘struct acpi_device’
drivers/media/pci/intel/ipu-bridge.c:280:30: error: invalid use of undefined type ‘struct acpi_device’
drivers/media/pci/intel/ipu-bridge.c:469:26: error: implicit declaration of function ‘acpi_device_hid’; did you mean ‘dmi_device_id’? [-Werror=implicit-function-declaration]
drivers/media/pci/intel/ipu-bridge.c:468:74: warning: format ‘%s’ expects argument of type ‘char *’, but argument 4 has type ‘int’ [-Wformat=]
drivers/media/pci/intel/ipu-bridge.c:637:58: error: expected ‘;’ before ‘{’ token
drivers/media/pci/intel/ipu-bridge.c:696:1: warning: label ‘err_put_adev’ defined but not used [-Wunused-label]
drivers/media/pci/intel/ipu-bridge.c:693:1: warning: label ‘err_put_ivsc’ defined but not used [-Wunused-label]
drivers/media/pci/intel/ipu-bridge.c:691:1: warning: label ‘err_free_swnodes’ defined but not used [-Wunused-label]
drivers/media/pci/intel/ipu-bridge.c:632:40: warning: unused variable ‘primary’ [-Wunused-variable]
drivers/media/pci/intel/ipu-bridge.c:632:31: warning: unused variable ‘fwnode’ [-Wunused-variable]
drivers/media/pci/intel/ipu-bridge.c:733:73: error: expected ‘;’ before ‘{’ token
drivers/media/pci/intel/ipu-bridge.c:725:24: warning: unused variable ‘csi_dev’ [-Wunused-variable]
drivers/media/pci/intel/ipu-bridge.c:724:43: warning: unused variable ‘adev’ [-Wunused-variable]
drivers/media/pci/intel/ipu-bridge.c:599:12: warning: ‘ipu_bridge_instantiate_ivsc’ defined but not used [-Wunused-function]
drivers/media/pci/intel/ipu-bridge.c:444:13: warning: ‘ipu_bridge_create_connection_swnodes’ defined but not used [-Wunused-function]
drivers/media/pci/intel/ipu-bridge.c:297:13: warning: ‘ipu_bridge_create_fwnode_properties’ defined but not used [-Wunused-function]
drivers/media/pci/intel/ipu-bridge.c:155:12: warning: ‘ipu_bridge_check_ivsc_dev’ defined but not used [-Wunused-function]
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Replace the old helpers with its modern alternative.
Now we do not need to set '__maybe_unused' annotations when we are not
enabling the PM configurations.
It fixes the following warnings:
drivers/media/pci/intel/ipu6/ipu6.c:841:12: warning: ‘ipu6_runtime_resume’ defined but not used [-Wunused-function]
drivers/media/pci/intel/ipu6/ipu6.c:806:12: warning: ‘ipu6_resume’ defined but not used [-Wunused-function]
drivers/media/pci/intel/ipu6/ipu6.c:801:12: warning: ‘ipu6_suspend’ defined but not used [-Wunused-function]
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The driver can only match the device vide the DT table, so the table
should always be used, of_match_ptr does not make sense here.
It fixes this warning:
drivers/media/platform/broadcom/bcm2835-unicam.c:2724:34: warning: ‘unicam_of_match’ defined but not used [-Wunused-const-variable=]
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
As pointed by smatch:
drivers/media/usb/dvb-usb/dw2102.c:802 su3000_i2c_transfer() error: __builtin_memcpy() '&state->data[4]' too small (64 vs 67)
That seemss to be due to a wrong copy-and-paste.
Fixes: 0e148a522b84 ("media: dw2102: Don't translate i2c read into write")
Reported-by: Hans Verkuil <hverkuil@xs4all.nl>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Some camera sensor can output the embedded data in specific data type.
This patch adds the support for metadata capture in IPU6 ISYS driver.
Signed-off-by: Hongju Wang <hongju.wang@intel.com>
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Co-developed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add Kconfig and Makefile for the IPU6 driver.
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Andreas Helbech Kleist <andreaskleist@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The main input system driver does basic ISYS hardware setup, IRQ handling
and sets up device nodes.
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Register V4L2 video device and setup the VB2 queues to support video
capture. Video streaming callback will trigger the input system driver to
construct a input system stream configuration for firmware based on data
type and stream ID and then queue buffers to firmware to do capture.
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Co-developed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
IPU6 CSI-2 D-PHY hardware varies on different platforms, current IPU6 has
three D-PHY hardware instances which are used on Tigerlake, Alder lake,
Meteor lake and Jasper lake. MCD D-PHY is included in Tigerlake and Alder
lake, DWC D-PHY is included in Meteor lake.
Each PHY has its own register interface, the input system driver calls the
appropriate D-PHY callbacks for the hardware set in isys_probe().
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Input system CSI2 receiver is exposed as a v4l2 sub-device. Each CSI2
sub-device represent one single CSI2 hardware port which be linked with
external sub-device such camera sensor by linked with ISYS CSI2's sink
pad. The CSI2 source pad is linked to the sink pad of video capture device.
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Implement the input system firmware ABIs in the ISYS driver, including
stream configuration, control command, capture request and response.
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Co-developed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Syscom is an inter-process(or) communication mechanism between an IPU and
host. Syscom uses message queues for message exchange between IPU and
host. Each message queue has its consumer and producer, host queue
messages to firmware as the producer and then firmware to dequeue the
messages as consumer and vice versa. IPU and host use shared registers or
memory to reside the read and write indices which are updated by consumer
and producer.
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The Intel IPU6 has internal microcontrollers (scalar processor, SP) which
are used to execute the firmware. The SPs can access IPU internal memory
and system DRAM mapped to its an internal 32-bit virtual address space.
This patch adds a driver for the IPU MMU and a DMA mapping implementation
using the internal MMU. The system IOMMU may be used besides the IPU MMU.
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
For IPU6, firmware is generated and released as signed Code Partition
Directory (CPD) format file which is aligned with the SPI flash code
partition definition. The CPD format includes CPD header, manifest,
metadata and module data. The driver parses them according to the CPD
layout to acquire each component.
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The IPU6 buttress is the interface between IPU device (input system and
processing system) with rest of the SoC. It contains overall IPU hardware
control registers, these control registers are used as the interfaces with
the Intel Converged Security Engine and Punit to do firmware
authentication and power management.
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Even though the IPU input system and processing system are in a single PCI
device, each system has its own power sequence. Powering up the processing
system depends on first powering up the input system.
Besides, both the input and processing systems have their own MMU hardware
for IPU DMA address mapping.
Register the IS/PS devices on auxiliary bus and attach power domain to
implement the power sequence dependency.
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Intel Image Processing Unit 6th Gen includes input and processing systems
but the hardware presents itself as a single PCI device in system.
The IPU6 PCI device driver basically does PCI configurations and loads the
firmware binary, initialises IPU virtual bus and sets up platform specific
variants to support multiple IPU6 devices in single device driver.
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Use IPU bridge to instantiate software nodes for IPU6 related devices. If
the IPU6 device is probed before the MEI CSI device is created, neither
will probe unless there are further devices probed successfully which
triggers re-probe of both IPU6 and MEI CSI.
This patch ensures the necessary software nodes are in place when the MEI
CSI driver is probed.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add a driver for the Unicam camera receiver block on BCM283x processors.
It is represented as two video device nodes: unicam-image and
unicam-embedded which are connected to an internal subdev (named
unicam-subdev) in order to manage streams routing.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Co-developed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Co-developed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Co-developed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[Sakari Ailus: Squash fixes by Laurent.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
This is a packed grey-scale image format with a depth of 14 bits per
pixel. Every four consecutive samples are packed into seven bytes. Each
of the first four bytes contain the eight high order bits of the pixels,
and the three following bytes contains the six least significants bits
of each pixel, in the same order.
As the other formats only needed 5 bytes before, append two bytes in the
documentation array.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
This is a packed grey-scale image format with a depth of 12 bits per
pixel. Two consecutive pixels are packed into 3 bytes. The first 2 bytes
contain the 8 high order bits of the pixels, and the 3rd byte contains
the 4 least significants bits of each pixel, in the same order.
Add the entry in userspace API, and document it.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add trivial S_ROUTING IOCTL support for drivers where routing is static.
Essentially this means returning the same information G_ROUTING call would
have done.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Co-developed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Julien Massot <julien.massot@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Return the routes set using S_ROUTING back to the user. Also reflect this
in documentation.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The len_routes field is used to tell the size of the routes array in
struct v4l2_subdev_routing. This way the number of routes returned from
S_ROUTING IOCTL may be larger than the number of routes provided, in case
there are more routes returned by the driver.
Note that this uAPI is still disabled in the code, so this change can
safely be done. Anyone who manually patched the code to enable this uAPI
must update their code.
The patch also increases the number of reserved fields in struct
v4l2_subdev_routing.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
As the user needs to know what went wrong for S_ROUTING, copy array
arguments back to the user.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Julien Massot <julien.massot@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add two new functions, v4l2_subdev_lock_states() and
v4l2_subdev_unclock_states(), to acquire and release the state of two
sub-devices. They differ from calling v4l2_subdev_{un,}lock_state() so
that if the two states share the same lock, the lock is acquired only
once.
Also use the new functions in v4l2_subdev_link_validate().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Julien Massot <julien.massot@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Set (and unset) the V4L2_FMT_FLAG_META_LINE_BASED flag in struct
v4l2_fmtdesc based on the format after returning the driver callback for
enumerating formats. This way the drivers don't need to care about the
flag.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Many camera sensors, among other devices, transmit embedded data and image
data for each CSI-2 frame. This embedded data typically contains register
configuration of the sensor that has been used to capture the image data
of the same frame.
The embedded data is received by the CSI-2 receiver and has the same
properties as the image data, including that it is line based: it has
width, height and bytesperline (stride).
Add these fields to struct v4l2_meta_format and document them.
Also add V4L2_FMT_FLAG_META_LINE_BASED to tell a given format is
line-based i.e. these fields of struct v4l2_meta_format are valid for it.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Generic 8-bit metadata formats define the in-memory data layout but not
the format of the data itself. The reasoning for having such formats is to
allow CSI-2 receiver drivers to receive and DMA drivers to write the data
to memory without knowing a large number of device-specific formats.
These formats may be used only in conjunction with a Media Controller
pipeline where the internal pad of the source sub-device defines the
specific format of the data (using an mbus code).
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Commit d725d20e81c2 ("media: flexcop-usb: sanity checking of endpoint type
") adds a sanity check for endpoint[1], but fails to modify the sanity
check of bNumEndpoints.
Fix this by modifying the sanity check of bNumEndpoints to 2.
Link: https://lore.kernel.org/linux-media/20220602055027.849014-1-dzm91@hust.edu.cn
Fixes: d725d20e81c2 ("media: flexcop-usb: sanity checking of endpoint type")
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
