IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
RT5650 is I2S codec integrated with HP and SPK.
The HW board connects SoC I2S to RT5650 codec as below:
I2S0: ALC5650 aif1 for Speaker
I2S2: ALC5650 aif2 for Headphone
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231113115907.18539-1-mac.chiang@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Zhu Ning <zhuning0077@gmail.com>:
We developed a new version of the chip. 3 Three patches are used for
compatibility with the old and new versions of the chip.We did tests
with the new driver at version_v0 and version_v3.The test results
from the test department met our expectations.Both versions work well
with the new drivers.
Merge series from Daniel Baluta <daniel.baluta@oss.nxp.com>:
This is used for configuring MICFIL PDM with i.MX8MPlus. Tested
with 8MIC-RPI-MX8 microphone array.
Merge series from Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>:
Instead of using MODULE_ALIAS() to load boards, add proper device id
table and use MODULE_DEVICE_TABLE() macro to create board alias.
Merge series from Trevor Wu <trevor.wu@mediatek.com>:
There are some variables that are no longer being used because they
were declared for the deprecated memory layout. Currently, these code
sections confuse the users. Therefore, this series removes the code
that was implemented for those variables.
Soundwire Devicetree bindings expect the Soundwire controller device
node to be named just "soundwire". Correct examples, so the incorrect
code will not be re-used.
Reported-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231107101610.13728-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add sound card for SM8550, which as of now looks fully compatible with
SM8450.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231106180422.170492-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert the binding to DT schema format. Note, that "IPVDD-supply"
got fixed to be "HPVDD-supply" during the conversion. This was
obviously a typo in the old binding. The old binding example, DT
files, chip datasheet and Linux driver use HPVDD.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231109184453.108676-1-sebastian.reichel@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Modify the aw88395_lib file so that the bin file
parsing is no longer related to the chip id of the chip.
Adopt the bin file data type "prof_data_type" as the
differentiation between different chip bin file
parsing methods.
Since the chip id macro for the aw88399 is no longer
defined in aw88395_reg.h, define the chip id
for the aw88399 in aw88399.h
Signed-off-by: Weidong Wang <wangweidong.a@awinic.com>
Link: https://lore.kernel.org/r/20231109093708.13155-1-wangweidong.a@awinic.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The use of 'definitions' is not necessary and also problematic because the
dtschema tools don't process 'definitions' resulting in this spurious
warning:
Documentation/devicetree/bindings/sound/renesas,rsnd.example.dtb: sound@ec500000: port:endpoint: Unevaluated properties are not allowed ('phandle' was unexpected)
from schema $id: http://devicetree.org/schemas/sound/renesas,rsnd.yaml#
Fix this by moving the port schema to #/properties/port and referencing
that directly from the 'ports' schema.
Really, a binding should just always use 'ports' if multiple ports are
possible. There's no benefit to supporting both forms. However, it appears
there are already lots of users of this one with a single 'port' node.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231101140923.16344-2-robh@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
New DAPM widgets are created based on a provided template. When cloning
the data, the name and stream name also need to be cloned. Currently the
data and the names are initialized in different places. Simplify the
code by having entire initialization in one place.
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231026113549.1897368-1-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The sti-uniperf pcm_config is the same as the default pcm_config.
Since commit 43556516fffe ("ASoC: soc-generic-dmaengine-pcm:
Use default config when none is given"), passing a NULL pointer
could let this driver use the default config.
Signed-off-by: Keguang Zhang <keguang.zhang@gmail.com>
Link: https://lore.kernel.org/r/20231106-sti-uniperf-v1-1-b2d8749cfa2e@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To prevent confusion on the follow-up platform, it is necessary to
remove any unused variables within the struct mtk_adsp_chip_info.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Reviewed-by: Yaochun Hung <yc.hung@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231103095433.10475-4-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since there are some variables that are no longer being used, we remove
the code that was implemented for those variables.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Reviewed-by: Yaochun Hung <yc.hung@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231103095433.10475-3-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since there are some variables that are no longer being used, we remove
the code that was implemented for those variables.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Reviewed-by: Yaochun Hung <yc.hung@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231103095433.10475-2-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The old headset detection time is not enough for the new chip version.
An error occurs with the old detection time.According to tests,
400ms is the best detection time that does not trigger an error.
The delay time after the trigger is reduced by 300ms to
keep the whole detection time unchanged.
Signed-off-by: Zhu Ning <zhuning0077@gmail.com>
Link: https://lore.kernel.org/r/20231101072702.91316-4-zhuning0077@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
New chip versions require new initialisation and playback processes.
Changing the initialisation and playback process for better results.
The old chip versions are going to work well with the new sequences.
We've tested this with version_v0 and version_v3 chips
under the new sequence and they both pass.
Signed-off-by: Zhu Ning <zhuning0077@gmail.com>
Link: https://lore.kernel.org/r/20231101072702.91316-3-zhuning0077@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The new chip version requires the addition of a new clock table.
We determine which clock table to choose based on the version.
Newer versions of the chip have fewer processes to go through
in the headset detection, so the version flag is used to skip them.
Signed-off-by: Zhu Ning <zhuning0077@gmail.com>
Link: https://lore.kernel.org/r/20231101072702.91316-2-zhuning0077@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add id_table and use it instead of alias to load module.
Suggested-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231102124712.2549327-18-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add id_table and use it instead of alias to load module.
Suggested-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231102124712.2549327-17-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add id_table and use it instead of alias to load module.
Suggested-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231102124712.2549327-16-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add id_table and use it instead of alias to load module.
Suggested-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231102124712.2549327-15-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add id_table and use it instead of alias to load module.
Suggested-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231102124712.2549327-14-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add id_table and use it instead of alias to load module.
Suggested-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231102124712.2549327-13-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add id_table and use it instead of alias to load module.
Suggested-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231102124712.2549327-12-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add id_table and use it instead of alias to load module.
Suggested-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231102124712.2549327-11-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add id_table and use it instead of alias to load module.
Suggested-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231102124712.2549327-10-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add id_table and use it instead of alias to load module.
Suggested-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231102124712.2549327-9-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add id_table and use it instead of alias to load module.
Suggested-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231102124712.2549327-8-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add id_table and use it instead of alias to load module.
Suggested-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231102124712.2549327-7-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add id_table and use it instead of alias to load module.
Suggested-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231102124712.2549327-6-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add id_table and use it instead of alias to load module.
Suggested-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231102124712.2549327-5-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add id_table and use it instead of alias to load module.
Suggested-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231102124712.2549327-4-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add id_table and use it instead of alias to load module.
Suggested-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231102124712.2549327-3-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add id_table and use it instead of alias to load module.
Suggested-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231102124712.2549327-2-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently we only support configuration for number of channels and
sample rate.
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20231109135900.88310-3-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This will allow creating of PDM DAI links.
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20231109135900.88310-2-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The commands should be sorted inside the group definition.
Fix the ordering so we won't get following warning:
WARN_ON(iwl_cmd_groups_verify_sorted(trans_cfg))
Link: https://lore.kernel.org/regressions/2fa930bb-54dd-4942-a88d-05a47c8e9731@gmail.com/
Link: https://lore.kernel.org/linux-wireless/CAHk-=wix6kqQ5vHZXjOPpZBfM7mMm9bBZxi2Jh7XnaKCqVf94w@mail.gmail.com/
Fixes: b6e3d1ba4fcf ("wifi: iwlwifi: mvm: implement new firmware API for statistics")
Tested-by: Niklāvs Koļesņikovs <pinkflames.linux@gmail.com>
Tested-by: Damian Tometzki <damian@riscv-rocks.de>
Acked-by: Kalle Valo <kvalo@kernel.org>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Include upper 5 address bits of physical address in iitlbp
- Prevent booting 64-bit kernels on PA1.x machines
- parport-gsc: mark init function static
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZVB1AgAKCRD3ErUQojoP
Xy+GAP0TlgE7ExHBB4jBpGf6uFuP0broznCeclPD4Bd0gngVhQEAz5v5m0FkJVVI
5nOlKbBzLU4Mt9WYEbqNhmoNrklvYQo=
=T1IA
-----END PGP SIGNATURE-----
Merge tag 'parisc-for-6.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture fixes from Helge Deller:
- Include the upper 5 address bits when inserting TLB entries on a
64-bit kernel.
On physical machines those are ignored, but in qemu it's nice to have
them included and to be correct.
- Stop the 64-bit kernel and show a warning if someone tries to boot on
a machine with a 32-bit CPU
- Fix a "no previous prototype" warning in parport-gsc
* tag 'parisc-for-6.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Prevent booting 64-bit kernels on PA1.x machines
parport: gsc: mark init function static
parisc/pgtable: Do not drop upper 5 address bits of physical address
1, Support PREEMPT_DYNAMIC with static keys;
2, Relax memory ordering for atomic operations;
3, Support BPF CPU v4 instructions for LoongArch;
4, Some build and runtime warning fixes.
-----BEGIN PGP SIGNATURE-----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=bmFe
-----END PGP SIGNATURE-----
Merge tag 'loongarch-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- support PREEMPT_DYNAMIC with static keys
- relax memory ordering for atomic operations
- support BPF CPU v4 instructions for LoongArch
- some build and runtime warning fixes
* tag 'loongarch-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
selftests/bpf: Enable cpu v4 tests for LoongArch
LoongArch: BPF: Support signed mod instructions
LoongArch: BPF: Support signed div instructions
LoongArch: BPF: Support 32-bit offset jmp instructions
LoongArch: BPF: Support unconditional bswap instructions
LoongArch: BPF: Support sign-extension mov instructions
LoongArch: BPF: Support sign-extension load instructions
LoongArch: Add more instruction opcodes and emit_* helpers
LoongArch/smp: Call rcutree_report_cpu_starting() earlier
LoongArch: Relax memory ordering for atomic operations
LoongArch: Mark __percpu functions as always inline
LoongArch: Disable module from accessing external data directly
LoongArch: Support PREEMPT_DYNAMIC with static keys
- Finish a refactor of pgprot_framebuffer() which dependend on some changes
that were merged via the drm tree.
- Fix some kernel-doc warnings to quieten the bots.
Thanks to: Nathan Lynch, Thomas Zimmermann.
-----BEGIN PGP SIGNATURE-----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=Qaeg
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Finish a refactor of pgprot_framebuffer() which dependend
on some changes that were merged via the drm tree
- Fix some kernel-doc warnings to quieten the bots
Thanks to Nathan Lynch and Thomas Zimmermann.
* tag 'powerpc-6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/rtas: Fix ppc_rtas_rmo_buf_show() kernel-doc
powerpc/pseries/rtas-work-area: Fix rtas_work_area_reserve_arena() kernel-doc
powerpc/fb: Call internal __phys_mem_access_prot() in fbdev code
powerpc: Remove file parameter from phys_mem_access_prot()
powerpc/machdep: Remove trailing whitespaces
