IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Clang warning:
>> sound/soc/intel/boards/sof_ssp_amp.c:97:6: warning: variable 'i'
set but not used [-Wunused-but-set-variable]
int i = 0;
^
The device counter is not used when the quirk is not set, which static
analysis cannot know. Move its initialization before the loop to
remove this warning.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220421163645.319686-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We are currently using generic PSP Mailbox register for sending SHA
complete command to PSP but observe random arbitration issue during
PSP validation as MP0_C2PMSG_26_REG used by other kernel modules.
Use separate mailbox registers and doorbell mechanism to send SHA_DMA
complete command to PSP. This fixes such validation issues and added
flexibility for sending more ACP commands to PSP in future as new mbox
registers i.e MP0_C2PMSG_114_REG and MP0_C2PMSG_73_REG are dedicated
by PSP for ACP communications.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220421165820.337207-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We need to ensure if PSP is mbox ready before and after sending cmd
to PSP over SMN interface. Add method to check MBOX_READY bit of PSP
with some delay over ACP_PSP_TIMEOUT_COUNTER. Replace psp_fw_validate
with new method psp_send_cmd() to send command via psp mailbox.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220421165820.337207-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This commit e138233e56e9829e65b6293887063a1a3ccb2d68 causes the
following system crash when using audio on G12A/G12B & SM1 systems:
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:282
in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 0, name: swapper/0
preempt_count: 10001, expected: 0
RCU nest depth: 0, expected: 0
Preemption disabled at:
schedule_preempt_disabled+0x20/0x2c
mutex_lock+0x24/0x60
_snd_pcm_stream_lock_irqsave+0x20/0x3c
snd_pcm_period_elapsed+0x24/0xa4
axg_fifo_pcm_irq_block+0x64/0xdc
__handle_irq_event_percpu+0x104/0x264
handle_irq_event+0x48/0xb4
...
start_kernel+0x3f0/0x484
__primary_switched+0xc0/0xc8
Revert this commit until the crash is fixed.
Fixes: e138233e56e9829e65b6 ("ASoC: meson: axg-card: make links nonatomic")
Reported-by: Dmitry Shmidt <dimitrysh@google.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20220421155725.2589089-2-narmstrong@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This reverts commit bf5e4887eeddb48480568466536aa08ec7f179a5 because
the following and required commit e138233e56e9829e65b6293887063a1a3ccb2d68
causes the following system crash when using audio:
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:282
Fixes: bf5e4887eeddb4848056846 ("ASoC: meson: axg-tdm-interface: manage formatters in trigger")
Reported-by: Dmitry Shmidt <dimitrysh@google.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20220421155725.2589089-1-narmstrong@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck throws the following warning:
sound/soc/soc-ops.c:461:8: style: Variable 'ret' is assigned a value
that is never used. [unreadVariable]
ret = err;
^
This seems to be a missing change in the return value.
Fixes: 7f3d90a351968 ("ASoC: ops: Fix stereo change notifications in snd_soc_put_volsw_sx()")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220421162328.302017-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Renesas Sound is very complex, and thus it needs to use
rsnd_node_fixed_index() to know enabled pin index.
It returns error if strange pin was selected,
but some codes didn't check it.
This patch 1) indicates error message, 2) check return
value.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87pmlbgn5t.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Because Sound Card needs many drivers to probe, current audio-graph-card2
will indicate "Experimental stage" at top of probe function even though
in case it gets -EPROBE_DEFER, thus it will be indicated many times.
This patch indicates it when probe was succeeded.
[ 1.601393] asoc-audio-graph-card2 sound: Audio Graph Card2 is still under Experimental stage
...
[ 1.721269] asoc-audio-graph-card2 sound: Audio Graph Card2 is still under Experimental stage
...
[ 1.755231] asoc-audio-graph-card2 sound: Audio Graph Card2 is still under Experimental stage
...
[ 1.907710] asoc-audio-graph-card2 sound: Audio Graph Card2 is still under Experimental stage
...
[ 1.933173] rcar_sound ec500000.sound: probed
[ 1.948875] asoc-audio-graph-card2 sound: Audio Graph Card2 is still under Experimental stage
[ 1.959558] asoc-audio-graph-card2 sound: ak4613-hifi <-> rsnd-dai.0 mapping ok
[ 1.968119] asoc-audio-graph-card2 sound: i2s-hifi <-> rsnd-dai.1 mapping ok
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87o80vgn5a.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
commit cfb7b8bf1e2d66 ("ASoC: rsnd: tidyup
rsnd_ssiu_busif_err_status_clear()") merged duplicate code, but it didn't
care about default case, and causes smatch warnings.
smatch warnings:
sound/soc/sh/rcar/ssiu.c:112 rsnd_ssiu_busif_err_status_clear() \
error: uninitialized symbol 'offset'.
sound/soc/sh/rcar/ssiu.c:114 rsnd_ssiu_busif_err_status_clear() \
error: uninitialized symbol 'shift'.
This patch cares it.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87r15rgn6p.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The G12A tohdmi has a custom put() operation which returns 0 when the value
of the mux changes, meaning that events are not generated for userspace.
Change to return 1 in this case, the function returns early in the case
where there is no change.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20220421123803.292063-4-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
The AIU CODEC has a custom put() operation which returns 0 when the value
of the mux changes, meaning that events are not generated for userspace.
Change to return 1 in this case, the function returns early in the case
where there is no change.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20220421123803.292063-3-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
The AIU ACODEC has a custom put() operation which returns 0 when the value
of the mux changes, meaning that events are not generated for userspace.
Change to return 1 in this case, the function returns early in the case
where there is no change.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20220421123803.292063-2-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Using pm_runtime_resume_and_get() to replace pm_runtime_get_sync and
pm_runtime_put_noidle. This change is just to simplify the code, no
actual functional changes.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220420030315.2575691-1-chi.minghao@zte.com.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
The tone generator frequency control just returns 0 on successful write,
not a boolean value indicating if there was a change or not. Compare
what was written with the value that was there previously so that
notifications are generated appropriately when the value changes.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220420133437.569229-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add alsa snd_soc_pm_ops callback in ACP machine driver to support
suspend and resume operation of sound card components
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Link: https://lore.kernel.org/r/20220420094442.1352717-1-AjitKumar.Pandey@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In asoc_simple_shutdown() the snd_soc_dai_set_sysclk() function
is called twice with input direction SND_SOC_CLOCK_IN.
Restore one call with output direction SND_SOC_CLOCK_OUT.
Fixes: 5ca2ab459817 ("ASoC: simple-card-utils: Add new system-clock-fixed flag")
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Link: https://lore.kernel.org/r/20220412111658.11015-1-olivier.moysan@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
With additional tests with the introduction of a 'deep-buffer' PCM
device mixed with the regular low-latency path, we came up with two
improvements in the BE state machine and transitions. The short
explanation is that the BE cannot directly use the trigger commands
provided by the FE, and a translation is needed to deal with paused
states.
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
The INTEL_IPC4 protocol and firmware architecture will rely on
different sets of firmware binary and topology files. Some platforms
will only support INTEL_IPC4, some will support both INTEL_IPC4 and
SOF_IPC for development, and some will stay with the existing SOF_IPC.
This patchset adds new IPC definitions, and search paths for firmware
and topology files, along with means to override the default IPC type
and search paths for development. The firmware binary names are
aligned with those used by the Intel AVS driver to avoid duplicate
firmware installs, but the topology will have to differ due to driver
architecture differences.
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:
A continuation of avs-driver initial series [1]. This chapter covers
path management and topology parsing part which was ealier path of the
main series. The two patches that represented these two subjects in the
initial series, have been split into many to allow for easier review and
discussion.
AVS topology is split into two major parts: dictionaries - found within
ASoC topology manifest - and path templates.
Dictionaries job is to reduce the total amount of memory
occupied by topology elements. Rather than having every pipeline and
module carry its own information, each refers to specific entry in
specific dictionary by provided (from topology file) indexes. In
consequence, most struct avs_tplg_xxx are made out of pointers.
Path templates are similar to path descriptions found in skylake-driver
and they describe how given path shall look like in runtime - number of
modules and pipelines that shape it and how they are laid out. A single
path template is tied either to FE or BE and thus at most to a single,
user-visible endpoint when speaking of FE.
Path is a software representation of its ADSP firmware equivalent. It's
a logical container for pipelines which are themselves containers - this
time for modules i.e. processing units.
Depending on the number of audio formats supported, each path template
may carry one or more descriptions of given path. During runtime, when
audio format is known, description matching said format is selected and
used when instantiating path on ADSP firmware side through IPCs.
When the BE was in PAUSED state, the correct trigger is PAUSE_RELEASE.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220406190056.233481-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 3aa1e96a2b95 ("ASoC: soc-pcm: fix BE handling of PAUSE_RELEASE")
did not modify the existing logic and kept the same logic for the following
transition
play FE1 -> BE state is START
pause FE1 -> BE state is PAUSED
play FE2 -> BE state is START
stop FE2 -> BE state is STOP <<< !!
release FE1 -> BE state is START
stop FE1 -> BE state is STOP
At the time it was identified by reviewers that a better solution
might consist in
play FE1 -> BE state is START
pause FE1 -> BE state is PAUSED
play FE2 -> BE state is START
stop FE2 -> BE state is PAUSE <<< !!
release FE1 -> BE state is START
stop FE1 -> BE state is STOP
This patch suggest a transition to PAUSE when all the 'active' streams
are paused. This would allow for a more consistent resource management
for platforms where PAUSE and STOP are handled differently.
To track the special case of an FE going from PAUSE_PUSH to STOP, we
add a state variable for each FE context. This 'fe_pause' boolean is
set on PAUSE_PUSH and cleared on either PAUSE_RELEASE and STOP
triggers.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220406190056.233481-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
SND_SOC_SOF_HDA_PROBES must be tristate because the code it builds
depends on code that is tristate.
If SND_SOC_SOF_HDA_PROBES is bool it leads to the following build
inconsistency:
SND_SOC_SOF_HDA_COMMON=m
which selects SND_SOC_SOF_HDA_PROBES
but since this is a bool SND_SOC_SOF_HDA_PROBES=y
SND_SOC_SOF_HDA_PROBES=y
selects SND_SOC_SOF_DEBUG_PROBES=y
so sof-client-probes.c is built into the kernel.
sof-client-probes.c calls functions in sof-client.c, but
SND_SOC_SOF=m
sof-client.c is built into a loadable module.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220407153813.1231866-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The WM8958 DSP controls all return 0 on successful write, not a boolean
value indicating if the write changed the value of the control. Fix this
by returning 1 after a change, there is already a check at the start of
each put() that skips the function in the case that there is no change.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220416125408.197440-1-broonie@kernel.org
Cc: stable@vger.kernel.org
The micfil driver prints out the IRQ numbers for each interrupt at error
level. This information is useful for debugging at best, remove it.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20220414162249.3934543-22-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
fsl_set_clock_params() is used only once and easily be folded into its
caller, do so.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20220414162249.3934543-21-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The "fsl,shared-interrupt" property is undocumented and unnecessary.
Just pass IRQF_SHARED unconditionally.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20220414162249.3934543-20-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
FSL_MICFIL_RATES and FSL_MICFIL_FORMATS is only used once. Drop
the unnecesary indirection and use SNDRV_PCM_RATE_8000_48000 and
SNDRV_PCM_FMTBIT_S16_LE directly.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20220414162249.3934543-19-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The micfil driver doesn't use anything from imx-pcm.h. Drop its
inclusion.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20220414162249.3934543-18-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
For the quality setting the quality setting register values are directly
exposed to the kcontrol and thus to userspace. This is unfortunate
because the register settings contains invalid bit combinations marked
as "N/A". For userspace it doesn't make much sense to be able to set
these just to see that the driver responds with "Please make sure you
select a valid quality." in the kernel log.
Work around this by adding get/set functions for the quality setting.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20220414162249.3934543-17-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The reference manual has this for calculating the micfil internal clock
divider:
MICFIL Clock rate
clkdiv = -----------------
8 * OSR * outrate
(with OSR == Oversampling Rate, outrate == output sample rate)
The driver first sets the MICFIL Clock rate to (outrate * 1024) and then
calculates back the clkdiv value from the above calculation.
Simplify this by using a fixed clkdiv value of 8 and set the MICFIL
Clock rate to (outrate * clkdiv * OSR * 8).
While at it drop disabling the clock before setting its rate. The MICFIL
module is disabled when the rate is changed and it is also resetted
before it is started again, so I doubt it's necessary to disable the
clock.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20220414162249.3934543-16-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
get_pdm_clk() calculates the PDM clock based on the quality setting,
but really the PDM clock is independent of the quality, it's always
rate * 4 * micfil->osr. Just drop the function and do the calculation
in the caller.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20220414162249.3934543-15-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The OSR (OverSampling Rate) setting is set once to the default value
and never changed throughout the driver. Nevertheless the value is
read back from the register for further calculations. Just use the
default value because we know what we have written.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20220414162249.3934543-14-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The micfil hardware provides the microphone data on multiple successive
FIFO registers, one register per stereo pair. Also to work properly the
SDMA_DONE0_CONFIG_DONE_SEL bit in the SDMA engines SDMA_DONE0_CONFIG
register must be set. This patch provides the necessary information to
the SDMA engine driver.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20220414162249.3934543-13-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The i.MX SDMA engine can read from / write to multiple successive
hardware FIFO registers, referred to as "Multi FIFO support". This is
needed for the micfil driver and certain configurations of the SAI
driver. This patch adds support for this feature.
The number of FIFOs to read from / write to must be communicated from
the client driver to the SDMA engine. For this the struct
dma_slave_config::peripheral_config field is used.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-By: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20220414162249.3934543-12-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The i.MX SDMA driver currently silently ignores unsupported transfer
types. These transfer types are specified in the dma channel description
in the device tree, so they should really be checked.
Issue a message and error out when we hit unsupported transfer types.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-By: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20220414162249.3934543-11-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The i.MX DMA drivers are device tree only, nothing in
include/linux/platform_data/dma-imx.h has platform_data in it, so move
the file to include/linux/dma/imx-dma.h.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-By: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20220414162249.3934543-10-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Failed register accesses are really not expected in memory mapped
registers. When it fails then the register access itself is likely not
the reason, so no need to have extra error messages for each regmap
access. Just drop the error messages. This also fixes some places where
a return value is concatenated using 'ret |=' and then returned as
error value.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20220414162249.3934543-8-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Instead regmap_update_bits() use the simpler variants
regmap_[set|clear]_bits() where appropriate.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20220414162249.3934543-7-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Use GENMASK along with FIELD_PREP and FIELD_GET to access bitfields in
registers to straighten register access and to drop a lot of defines.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20220414162249.3934543-6-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
No need to have defines for the mask of single bits. Also shift is
unused. Drop all these unnecessary defines.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20220414162249.3934543-5-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
All that the .set_sysclk hook in the micfil driver does is to pass
the sysclk frequency to fsl_micfil_set_mclk_rate(). This function
expects the sample rate as argument though, not any kind of sysclk
frequency. The resulting rate setting of the clock is overwritten
in hw_params anyway, so drop this altogether.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20220414162249.3934543-4-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
In get_pdm_clk() REG_MICFIL_CTRL2 is read, but the result is never used.
Drop the unused code.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20220414162249.3934543-3-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
in get_pdm_clk() REG_MICFIL_CTRL2 is read twice. Drop second read.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20220414162249.3934543-2-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Using pm_runtime_resume_and_get is more appropriate
for simplifing code
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220418110259.2559144-1-chi.minghao@zte.com.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
