IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
All wed versions should enable the wcid overwritten feature,
since the wcid size is controlled by the wlan driver.
Tested-by: Sujuan Chen <sujuan.chen@mediatek.com>
Co-developed-by: Bo Jiao <bo.jiao@mediatek.com>
Signed-off-by: Bo Jiao <bo.jiao@mediatek.com>
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-11-23 (ice)
This series contains updates to ice driver only.
Karol adjusts check of PTP hardware to wait longer but check more often.
Brett removes use of driver defined link speed; instead using the values
from ethtool.h, utilizing static tables for indexing.
Ben adds tracking of stats in order to accumulate reported statistics that
were previously reset by hardware.
Marcin fixes issues setting RXDID when queues are asymmetric.
Anatolii re-introduces use of define over magic number; ICE_RLAN_BASE_S.
---
v3:
- Dropped, previous, patch 2
v2:
Patch 5
- Convert some allocations to non-managed
- Remove combined error checking; add error checks for each call
- Remove excess NULL checks
- Remove unnecessary NULL sets and newlines
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Anirudh Venkataramanan says:
====================
net: Remove uses of kmap_atomic()
kmap_atomic() is being deprecated. This little series replaces the last
few uses of kmap_atomic() in the networking subsystem.
This series triggered a suggestion [1] that perhaps the Sun Cassini,
LDOM Virtual Switch Driver and the LDOM virtual network drivers should be
removed completely. I plan to do this in a follow up patchset. For
completeness, this series still includes kmap_atomic() conversions that
apply to the above referenced drivers. If for some reason we choose to not
remove these drivers, at least they won't be using kmap_atomic() anymore.
Also, the following maintainer entries for the Chelsio driver seem to be
defunct:
Vinay Kumar Yadav <vinay.yadav@chelsio.com>
Rohit Maheshwari <rohitm@chelsio.com>
I can submit a follow up patch to remove these entries, but thought
maybe the folks over at Chelsio would want to look into this first.
Changes v1 -> v2:
Use memcpy_from_page() in patches 2/6 and 4/6
Add new patch for the thunderbolt driver
Update commit messages and cover letter
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
kmap_atomic() is being deprecated in favor of kmap_local_page(). Replace
kmap_atomic() and kunmap_atomic() with kmap_local_page() and kunmap_local()
respectively.
Note that kmap_atomic() disables preemption and page-fault processing, but
kmap_local_page() doesn't. When converting uses of kmap_atomic(), one has
to check if the code being executed between the map/unmap implicitly
depends on page-faults and/or preemption being disabled. If yes, then code
to disable page-faults and/or preemption should also be added for
functional correctness. That however doesn't appear to be the case here,
so just kmap_local_page() is used.
Also note that the page being mapped is not allocated by the driver, and so
the driver doesn't know if the page is in normal memory. This is the reason
kmap_local_page() is used as opposed to page_address().
I don't have hardware, so this change has only been compile tested.
Cc: Michael Jamet <michael.jamet@intel.com>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Yehezkel Bernat <YehezkelShB@gmail.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
kmap_atomic() is being deprecated in favor of kmap_local_page(). Replace
kmap_atomic() and kunmap_atomic() with kmap_local_page() and kunmap_local()
respectively.
Note that kmap_atomic() disables preemption and page-fault processing, but
kmap_local_page() doesn't. When converting uses of kmap_atomic(), one has
to check if the code being executed between the map/unmap implicitly
depends on page-faults and/or preemption being disabled. If yes, then code
to disable page-faults and/or preemption should also be added for
functional correctness. That however doesn't appear to be the case here,
so just kmap_local_page() is used.
Also note that the page being mapped is not allocated by the driver, and so
the driver doesn't know if the page is in normal memory. This is the reason
kmap_local_page() is used as opposed to page_address().
I don't have hardware, so this change has only been compile tested.
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
kmap_atomic() is being deprecated in favor of kmap_local_page(). Replace
the map-memcpy-unmap usage pattern (done using k[un]map_atomic()) with
memcpy_from_page(), which internally uses kmap_local_page() and
kunmap_local(). This renders the variable 'vaddr' unnecessary, and so
remove this too.
Note that kmap_atomic() disables preemption and page-fault processing, but
kmap_local_page() doesn't. When converting uses of kmap_atomic(), one has
to check if the code being executed between the map/unmap implicitly
depends on page-faults and/or preemption being disabled. If yes, then code
to disable page-faults and/or preemption should also be added for
functional correctness. That however doesn't appear to be the case here,
so just memcpy_from_page() is used.
Also note that the page being mapped is not allocated by the driver, and so
the driver doesn't know if the page is in normal memory. This is the reason
kmap_local_page() is used (via memcpy_from_page()) as opposed to
page_address().
I don't have hardware, so this change has only been compile tested.
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Suggested-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pages for Rx buffers are allocated in cas_page_alloc() using either
GFP_ATOMIC or GFP_KERNEL. Memory allocated with GFP_KERNEL/GFP_ATOMIC can't
come from highmem and so there's no need to kmap() them. Just use
page_address() instead. This makes the variable 'addr' unnecessary, so
remove it too.
Note that kmap_atomic() disables preemption and page-fault processing,
but page_address() doesn't. When removing uses of kmap_atomic(), one has to
check if the code being executed between the map/unmap implicitly depends
on page-faults and/or preemption being disabled. If yes, then code to
disable page-faults and/or preemption should also be added for functional
correctness. That however doesn't appear to be the case here, so just
page_address() is used.
I don't have hardware, so this change has only been compile tested.
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
kmap_atomic() is being deprecated in favor of kmap_local_page(). Replace
kmap_atomic() and kunmap_atomic() with kmap_local_page() and kunmap_local()
respectively.
Note that kmap_atomic() disables preemption and page-fault processing, but
kmap_local_page() doesn't. When converting uses of kmap_atomic(), one has
to check if the code being executed between the map/unmap implicitly
depends on page-faults and/or preemption being disabled. If yes, then code
to disable page-faults and/or preemption should also be added for
functional correctness. That however doesn't appear to be the case here,
so just kmap_local_page() is used.
Also note that the page being mapped is not allocated by the driver, and so
the driver doesn't know if the page is in normal memory. This is the reason
kmap_local_page() is used as opposed to page_address().
I don't have hardware, so this change has only been compile tested.
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Cc: Edward Cree <ecree.xilinx@gmail.com>
Cc: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
kmap_atomic() is being deprecated in favor of kmap_local_page(). Replace
the map-memcpy-unmap usage pattern (done using k[un]map_atomic()) with
memcpy_from_page(), which internally uses kmap_local_page() and
kunmap_local(). This renders the variables 'data' and 'vaddr' unnecessary,
and so remove these too.
Note that kmap_atomic() disables preemption and page-fault processing, but
kmap_local_page() doesn't. When converting uses of kmap_atomic(), one has
to check if the code being executed between the map/unmap implicitly
depends on page-faults and/or preemption being disabled. If yes, then code
to disable page-faults and/or preemption should also be added for
functional correctness. That however doesn't appear to be the case here,
so just memcpy_from_page() is used.
Also note that the page being mapped is not allocated by the driver, and so
the driver doesn't know if the page is in normal memory. This is the reason
kmap_local_page() is used (via memcpy_from_page()) as opposed to
page_address().
I don't have hardware, so this change has only been compile tested.
Cc: Ayush Sawal <ayush.sawal@chelsio.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Suggested-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Acked-by: Ayush Sawal <ayush.sawal@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Horatiu Vultur says:
====================
net: lan966x: Extend xdp support
Extend the current support of XDP in lan966x with the action XDP_TX and
XDP_REDIRECT.
The first patches just prepare the things such that it would be easier
to add XDP_TX and XDP_REDIRECT actions. Like adding XDP_PACKET_HEADROOM,
introduce helper functions, use the correct dma_dir for the page pool
The last 2 patches introduce the XDP actions XDP_TX and XDP_REDIRECT.
v4->v5:
- add iterator declaration inside for loops
- move the scope of port inside the function lan966x_fdma_rx_alloc_page_pool
- create union for skb and xdpf inside struct lan966x_tx_dcb_buf
v3->v4:
- use napi_consume_skb instead of dev_kfree_skb_any
- arrange members in struct lan966x_tx_dcb_buf not to have holes
- fix when xdp program is added the check for determining if page pool
needs to be recreated was wrong
- change type for len in lan966x_tx_dcb_buf to u32
v2->v3:
- make sure to update rxq memory model
- update the page pool direction if there is any xdp program
- in case of action XDP_TX give back to reuse the page
- in case of action XDP_REDIRECT, remap the frame and make sure to
unmap it when is transmitted.
v1->v2:
- use skb_reserve of using skb_put and skb_pull
- make sure that data_len doesn't include XDP_PACKET_HEADROOM
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Extend lan966x XDP support with the action XDP_REDIRECT. This is similar
with the XDP_TX, so a lot of functionality can be reused.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extend lan966x XDP support with the action XDP_TX. In this case when the
received buffer needs to execute XDP_TX, the buffer will be moved to the
TX buffers. So a new RX buffer will be allocated.
When the TX finish with the frame, it would give back the buffer to the
page pool.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To add support for XDP_TX it is required to be able to write to the DMA
area therefore it is required that the pages will be mapped using
DMA_BIDIRECTIONAL flag.
Therefore check if there are any xdp programs on the interfaces and in
that case set DMA_BIDRECTIONAL otherwise use DMA_FROM_DEVICE.
Therefore when a new XDP program is added it is required to redo the
page_pool.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
By default the rxq memory model is MEM_TYPE_PAGE_SHARED but to be able
to reuse pages on the TX side, when the XDP action XDP_TX it is required
to update the memory model to PAGE_POOL.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently when a frame was transmitted, it is required to unamp the
frame that was transmitted. The length of the frame was taken from the
transmitted skb. In the future we might not have an skb, therefore store
the length skb directly in the lan966x_tx_dcb_buf and use this one to
unamp the frame.
While at this, also arrange the members in lan966x_tx_dcb_buf not to
have any holes.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce lan966x_fdma_tx_setup_dcb and lan966x_fdma_tx_start functions
and use of them inside lan966x_fdma_xmit. There is no functional change
in here.
They are introduced to be used when XDP_TX/REDIRECT actions are
introduced.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Update the page_pool params to allocate XDP_PACKET_HEADROOM space as
headroom for all received frames.
This is needed for when the XDP_TX and XDP_REDIRECT are implemented.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
PEROUT_ENABLE_OUTPUT_MASK was there to allow us to enable/disable
all the perout pins. But it is not standard procedure, we will
have to discard it.
Signed-off-by: Min Li <min.li.xe@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
82P33 family of chips can trigger TOD read/write by external
signal from one of the IN12/13/14 pins, which are set user
space programs by calling PTP_PIN_SETFUNC through ptp_ioctl
Signed-off-by: Min Li <min.li.xe@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Steen Hegelund says:
====================
net: TC protocol all support in Sparx5 IS2 VCAP
This provides support for the TC flower filters 'protocol all' clause in
the Sparx5 IS2 VCAP.
It builds on top of the initial IS2 VCAP support found in these series:
https://lore.kernel.org/all/20221020130904.1215072-1-steen.hegelund@microchip.com/https://lore.kernel.org/all/20221109114116.3612477-1-steen.hegelund@microchip.com/https://lore.kernel.org/all/20221111130519.1459549-1-steen.hegelund@microchip.com/https://lore.kernel.org/all/20221117213114.699375-1-steen.hegelund@microchip.com/
Functionality:
==============
As the configuration for the Sparx5 IS2 VCAP consists of one (or more)
keyset(s) for each lookup/port per traffic classification, it is not
always possible to cover all protocols with just one ordinary VCAP rule.
To improve this situation the driver will try to find out what keysets a
rule will need to cover a TC flower "protocol all" filter and then compare
this set of keysets to what the hardware is currently configured for.
In case multiple keysets are needed then the driver can create a rule per
rule size (e.g. X6 and X12) and use a mask on the keyset type field to
allow the VCAP to match more than one keyset with just one rule.
This is possible because the keysets that have the same size typically has
many keys in common, so the VCAP rule keys can make a common match.
The result is that one TC filter command may create multiple IS2 VCAP rules
of different sizes that have a type field with a masked type id.
Delivery:
=========
This is current plan for delivering the full VCAP feature set of Sparx5:
- Sparx5 IS0 VCAP support
- TC policer and drop action support (depends on the Sparx5 QoS support
upstreamed separately)
- Sparx5 ES0 VCAP support
- TC flower template support
- TC matchall filter support for mirroring and policing ports
- TC flower filter mirror action support
- Sparx5 ES2 VCAP support
Version History:
================
v2 Fixed a NULL return value compiler warning.
Moved the new vcap_find_actionfield function a bit up in the file.
v1 Initial version
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This tests the filtering of keys, either dropping unsupported keys or
dropping keys specified in a list.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This will display a list of keyset in case the type_id field in the VCAP
rule has been wildcarded.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This allows support of TC protocol all for the Sparx5 IS2 VCAP.
This is done by creating multiple rules that covers the rule size and
traffic types in the IS2.
Each rule size (e.g X16 and X6) may have multiple keysets and if there are
more than one the type field in the VCAP rule will be wildcarded to support
these keysets.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds support for making a copy of a rule and modify keys and actions
to differentiate the copy.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Variable 'insert_retries' is not effectively used in the function, so
delete it.
lib/test_rhashtable.c:437:18: warning: variable 'insert_retries' set but not used.
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3242
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace the open-code with sysfs_streq().
Signed-off-by: Xu Panda <xu.panda@zte.com.cn>
Signed-off-by: Yang Yang <yang.yang29@zte.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We added patch for motorcomm.c to support YT8531S. This patch has
been tested on AM335x platform which has one YT8531S interface
card and passed all test cases.
The tested cases indluding: YT8531S UTP function with support of
10M/100M/1000M; YT8531S Fiber function with support of 100M/1000M;
and YT8531S Combo function that supports auto detection of media type.
Since most functions of YT8531S are similar to YT8521 and we reuse some
codes for YT8521 in the patch file.
Signed-off-by: Frank <Frank.Sae@motor-comm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For the cases where 'reason' doesn't give any clue, it's still
nice to be able to track the kfree_skb caller location. %p doesn't
help much so let's use %pS which prints the symbol+offset.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20221123040947.1015721-1-sdf@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jonathan Toppins says:
====================
bonding: fix bond recovery in mode 2
When a bond is configured with a non-zero updelay and in mode 2 the bond
never recovers after all slaves lose link. The first patch adds
selftests that demonstrate the issue and the second patch fixes the
issue by ignoring the updelay when there are no usable slaves.
====================
Link: https://lore.kernel.org/r/cover.1669147951.git.jtoppins@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Before this change when a bond in mode 2 lost link, all of its slaves
lost link, the bonding device would never recover even after the
expiration of updelay. This change removes the updelay when the bond
currently has no usable links. Conforming to bonding.txt section 13.1
paragraph 4.
Fixes: 41f891004063 ("bonding: ignore updelay param when there is no active slave")
Signed-off-by: Jonathan Toppins <jtoppins@redhat.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Verify when a bond is configured with {up,down}delay and the link state
of slave members flaps if there are no remaining members up the bond
should immediately select a member to bring up. (from bonding.txt
section 13.1 paragraph 4)
Suggested-by: Liang Li <liali@redhat.com>
Signed-off-by: Jonathan Toppins <jtoppins@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The value of an arithmetic expression "n * id.data" is subject
to possible overflow due to a failure to cast operands to a larger data
type before performing arithmetic. Used macro for multiplication instead
operator for avoiding overflow.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Maxim Korotkov <korotkov.maxim.s@gmail.com>
Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20221122122901.22294-1-korotkov.maxim.s@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 72adf2421d9b ("ice: Move common functions out of ice_main.c part
2/7") moved an older version of ice_setup_rx_ctx() function with
usage of magic number 7.
Reimplement the commit 5ab522443bd1 ("ice: Cleanup magic number") to use
ICE_RLAN_BASE_S instead of magic number.
Signed-off-by: Anatolii Gerasymenko <anatolii.gerasymenko@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Currently the VIRTCHNL_OP_CONFIG_VSI_QUEUES command may fail if there are
less RX queues than TX queues requested.
To fix it, only configure RXDID if RX queue exists.
Fixes: e753df8fbca5 ("ice: Add support Flex RXD")
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Resets may occur with or without user interaction. For example, a TX hang
or reconfiguration of parameters will result in a reset. During reset, the
VSI is freed, freeing any statistics structures inside as well. This would
create an issue for the user where a reset happens in the background,
statistics set to zero, and the user checks ring statistics expecting them
to be populated.
To ensure this doesn't happen, accumulate ring statistics over reset.
Define a new ring statistics structure, ice_ring_stats. The new structure
lives in the VSI's parent, preserving ring statistics when VSI is freed.
1. Define a new structure vsi_ring_stats in the PF scope
2. Allocate/free stats only during probe, unload, or change in ring size
3. Replace previous ring statistics functionality with new structure
Signed-off-by: Benjamin Mikailenko <benjamin.mikailenko@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Resets happen with or without user interaction. For example, incidents
such as TX hang or a reconfiguration of parameters will result in a reset.
During reset, hardware and software statistics were set to zero. This
created an issue for the user where a reset happens in the background,
statistics set to zero, and the user checks statistics expecting them to
be populated.
To ensure this doesn't happen, keep accumulating stats over reset.
1. Remove function calls which reset hardware and netdev statistics.
2. Do not rollover statistics in ice_stat_update40 during reset.
Signed-off-by: Benjamin Mikailenko <benjamin.mikailenko@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The driver is currently using ICE_LINK_SPEED_* defines that mirror what
ethtool.h defines, with one exception ICE_LINK_SPEED_UNKNOWN.
This issue is fixed by the following changes:
1. replace ICE_LINK_SPEED_UNKNOWN with 0 because SPEED_UNKNOWN in
ethtool.h is "-1" and that doesn't match the driver's expected behavior
2. transform ICE_LINK_SPEED_*MBPS to SPEED_* using static tables and
fls()-1 to convert from BIT() to an index in a table.
Suggested-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Co-developed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
