IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
'GPL-2.0-only' is used instead of 'GPL-2.0' because SPDX has
deprecated its use.
Suggested-by: John Wiele <jwiele@redhat.com>
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Device mapper sends an uevent when the device is suspended, using the
function set_capacity_and_notify. However, this causes a race condition
with udev.
Udev skips scanning dm devices that are suspended. If we send an uevent
while we are suspended, udev will be racing with device mapper resume
code. If the device mapper resume code wins the race, udev will process
the uevent after the device is resumed and it will properly scan the
device.
However, if udev wins the race, it will receive the uevent, find out that
the dm device is suspended and skip scanning the device. This causes bugs
such as systemd unmounting the device - see
https://bugzilla.redhat.com/show_bug.cgi?id=2158628
This commit fixes this race.
We replace the function set_capacity_and_notify with set_capacity, so that
the uevent is not sent at this point. In do_resume, we detect if the
capacity has changed and we pass a boolean variable need_resize_uevent to
dm_kobject_uevent. dm_kobject_uevent adds "RESIZE=1" to the uevent if
need_resize_uevent is set.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Tested-by: Peter Rajnoha <prajnoha@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
If a DM device's table references itself, it will crash the kernel with an
infinite recursion. Check for a self-reference in dm_get_device(). This
is a quick check, but it won't catch more complicated circular references.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Setting WQ_UNBOUND increases scheduler latency on ARM64. This is
likely due to the asymmetric architecture of ARM64 processors.
I've been unable to reproduce the results that claim WQ_UNBOUND gives
a performance boost on x86-64.
This flag is causing performance issues for multiple subsystems within
Android. Notably, the same slowdown exists for decompression with
EROFS.
| open-prebuilt-camera | WQ_UNBOUND | ~WQ_UNBOUND |
|-----------------------|------------|---------------|
| verity wait time (us) | 11746 | 119 (-98%) |
| erofs wait time (us) | 357805 | 174205 (-51%) |
| sha256 ramdisk random read | WQ_UNBOUND | ~WQ_UNBOUND |
|----------------------------|-----------=---|-------------|
| arm64 (accelerated) | bw=42.4MiB/s | bw=212MiB/s |
| arm64 (generic) | bw=16.5MiB/s | bw=48MiB/s |
| x86_64 (generic) | bw=233MiB/s | bw=230MiB/s |
Using a alloc_workqueue() @max_active arg of num_online_cpus() only
made sense with WQ_UNBOUND. Switch the @max_active arg to 0 (aka
default, which is 256 per-cpu).
Also, eliminate 'wq_flags' since it really doesn't serve a purpose.
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Use strchr() instead of strpbrk() when there is only 1 element in the set
of characters to look for.
This potentially saves a few cycles, but gcc does already account for
optimizing this pattern thanks to it's fold_builtin_strpbrk().
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
The expression 'indata[3] > ULONG_MAX' always evaluates to false since
indata[] is declared as an array of *unsigned long* elements and #define
ULONG_MAX represents the max value of that exact type...
Note that gcc seems to be able to detect the dead code here and eliminate
this check anyway...
Found by Linux Verification Center (linuxtesting.org) with the SVACE static
analysis tool.
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
If "corrupt_bio_byte" is set to corrupt reads and corrupt_bio_flags is
used, dm-flakey would erroneously return all writes as errors. Likewise,
if "corrupt_bio_byte" is set to corrupt writes, dm-flakey would return
errors for all reads.
Fix the logic so that if fc->corrupt_bio_byte is non-zero, dm-flakey
will not abort reads on writes with an error.
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
The function page_address does not work with 32-bit systems with high
memory. Use bvec_kmap_local/kunmap_local instead.
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
When we need to zero some range on a block device, the function
__blkdev_issue_zero_pages submits a write bio with the bio vector pointing
to the zero page. If we use dm-flakey with corrupt bio writes option, it
will corrupt the content of the zero page which results in crashes of
various userspace programs. Glibc assumes that memory returned by mmap is
zeroed and it uses it for calloc implementation; if the newly mapped
memory is not zeroed, calloc will return non-zeroed memory.
Fix this bug by testing if the page is equal to ZERO_PAGE(0) and
avoiding the corruption in this case.
Cc: stable@vger.kernel.org
Fixes: a00f5276e266 ("dm flakey: Properly corrupt multi-page bios.")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Commit e33c267ab70d ("mm: shrinkers: provide shrinkers with names")
chose some fairly bad names for DM's shrinkers.
Fixes: e33c267ab70d ("mm: shrinkers: provide shrinkers with names")
Signed-off-by : Mike Snitzer <snitzer@kernel.org>
Assuming that both Kconfig options, BLK_CGROUP and IOSCHED_BFQ are set, we
most likely want cgroup support for BFQ too (BFQ_GROUP_IOSCHED), so let's
make it default y.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230130121240.159456-1-ulf.hansson@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
bfqd->bfq_wr_max_time is set to 0 in bfq_init_queue and is never changed.
It is only used in bfq_wr_duration when bfq_wr_max_time > 0 which never
meets, so bfqd->bfq_wr_max_time is not used actually. Just remove it.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230116095153.3810101-9-shikemeng@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We jump to tag only for returning current rq. Return directly to
remove this tag.
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Link: https://lore.kernel.org/r/20230116095153.3810101-8-shikemeng@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We have already avoided a circular list in bfq_setup_merge (see comments
in bfq_setup_merge() for details), so bfq_queue will not appear in it's
new_bfqq list. Just remove this check.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230116095153.3810101-7-shikemeng@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Inject limit is updated or reset when time_is_before_eq_jiffies(
decrease_time_jif + several msecs) or think-time state changes.
decrease_time_jif is initialized to 0 and will be set to current jiffies
when inject limit is updated or reset. If the jiffies is slightly greater
than LONG_MAX, time_is_after_eq_jiffies(0) will keep for a long time, so as
time_is_after_eq_jiffies(decrease_time_jif + several msecs). If the
think-time state never chages, then the injection will not work as expected
for long time.
To be more specific:
Function bfq_update_inject_limit maybe triggered when jiffies pasts
decrease_time_jif + msecs_to_jiffies(10) in bfq_add_request by setting
bfqd->wait_dispatch to true.
Function bfq_reset_inject_limit are called in two conditions:
1. jiffies pasts bfqq->decrease_time_jif + msecs_to_jiffies(1000) in
function bfq_add_request.
2. jiffies pasts bfqq->decrease_time_jif + msecs_to_jiffies(100) or
bfq think-time state change from short to long.
Fix this by initializing bfqq->decrease_time_jif to current jiffies
to trigger service injection soon when service injection conditions
are met.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230116095153.3810101-4-shikemeng@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Function bfq_choose_bfqq_for_injection may temporarily raise inject limit
to one request if current inject_limit is 0 before search of the source
queue for injection. However the search below will reset inject limit to
bfqd->in_service_queue which is zero for raised inject limit. Then the
temporarily raised inject limit never works as expected.
Assigment limit to bfqd->in_service_queue in search is needed as limit
maybe overwriten to min_t(unsigned int, 1, limit) for condition that
a large in-flight request is on non-rotational devices in found queue.
So we need to reset limit to bfqd->in_service_queue for normal case.
Actually, we have already make sure bfqd->rq_in_driver is < limit before
search, then
-Limit is >= 1 as bfqd->rq_in_driver is >= 0. Then min_t(unsigned int,
1, limit) is always 1. So we can simply check bfqd->rq_in_driver with
1 instead of result of min_t(unsigned int, 1, limit) for larget request in
non-rotational device case to avoid overwritting limit and the bug is gone.
-For normal case, we have already check bfqd->rq_in_driver is < limit,
so we can return found bfqq unconditionally to remove unncessary check.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230116095153.3810101-2-shikemeng@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
