IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
commit 61e21cf2d2c3cc5e60e8d0a62a77e250fccda62c upstream.
When guard page debug is enabled and set_page_guard returns success, we
miss to forward page to point to start of next split range and we will do
split unexpectedly in page range without target page. Move start page
update before set_page_guard to fix this.
As we split to wrong target page, then splited pages are not able to merge
back to original order when target page is put back and splited pages
except target page is not usable. To be specific:
Consider target page is the third page in buddy page with order 2.
| buddy-2 | Page | Target | Page |
After break down to target page, we will only set first page to Guard
because of bug.
| Guard | Page | Target | Page |
When we try put_page_back_buddy with target page, the buddy page of target
if neither guard nor buddy, Then it's not able to construct original page
with order 2
| Guard | Page | buddy-0 | Page |
All pages except target page is not in free list and is not usable.
Link: https://lkml.kernel.org/r/20230927094401.68205-1-shikemeng@huaweicloud.com
Fixes: 06be6ff3d2ec ("mm,hwpoison: rework soft offline for free pages")
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 92fe9dcbe4e109a7ce6bab3e452210a35b0ab493 upstream.
Patch series "hugetlbfs: close race between MADV_DONTNEED and page fault", v7.
Malloc libraries, like jemalloc and tcalloc, take decisions on when to
call madvise independently from the code in the main application.
This sometimes results in the application page faulting on an address,
right after the malloc library has shot down the backing memory with
MADV_DONTNEED.
Usually this is harmless, because we always have some 4kB pages sitting
around to satisfy a page fault. However, with hugetlbfs systems often
allocate only the exact number of huge pages that the application wants.
Due to TLB batching, hugetlbfs MADV_DONTNEED will free pages outside of
any lock taken on the page fault path, which can open up the following
race condition:
CPU 1 CPU 2
MADV_DONTNEED
unmap page
shoot down TLB entry
page fault
fail to allocate a huge page
killed with SIGBUS
free page
Fix that race by extending the hugetlb_vma_lock locking scheme to also
cover private hugetlb mappings (with resv_map), and pulling the locking
from __unmap_hugepage_final_range into helper functions called from
zap_page_range_single. This ensures page faults stay locked out of the
MADV_DONTNEED VMA until the huge pages have actually been freed.
This patch (of 3):
Hugetlbfs leaves a dangling pointer in the VMA if mmap fails. This has
not been a problem so far, but other code in this patch series tries to
follow that pointer.
Link: https://lkml.kernel.org/r/20231006040020.3677377-1-riel@surriel.com
Link: https://lkml.kernel.org/r/20231006040020.3677377-2-riel@surriel.com
Fixes: 04ada095dcfc ("hugetlb: don't delete vma_lock in hugetlb MADV_DONTNEED processing")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Rik van Riel <riel@surriel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e0f81ab1e4f42ffece6440dc78f583eb352b9a71 upstream.
Calling vm_brk_flags() with flags set other than VM_EXEC will exit the
function without releasing the mmap_write_lock.
Just do the sanity check before the lock is acquired. This doesn't fix an
actual issue since no caller sets a flag other than VM_EXEC.
Link: https://lkml.kernel.org/r/20230929171937.work.697-kees@kernel.org
Fixes: 2e7ce7d354f2 ("mm/mmap: change do_brk_flags() to expand existing VMA and add do_brk_munmap()")
Signed-off-by: Sebastian Ott <sebott@redhat.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8cd79b729e746cb167f1563d015a93fc0a079899 upstream.
Commit 91419ae0420f ("arm64: dts: rockchip: use BCLK to GPIO switch on
rk3399") modified i2s0 to switch the corresponding pins off when idle.
For the ROCK Pi 4 boards, this means that i2s0 has the following pinctrl
setting:
pinctrl-names = "bclk_on", "bclk_off";
pinctrl-0 = <&i2s0_2ch_bus>;
pinctrl-1 = <&i2s0_8ch_bus_bclk_off>;
Due to this change, i2s0 fails to probe on my Radxa ROCK 4SE and ROCK Pi
4B boards:
rockchip-pinctrl pinctrl: pin gpio3-29 already requested by leds; cannot claim for ff880000.i2s
rockchip-pinctrl pinctrl: pin-125 (ff880000.i2s) status -22
rockchip-pinctrl pinctrl: could not request pin 125 (gpio3-29) from group i2s0-8ch-bus-bclk-off on device rockchip-pinctrl
rockchip-i2s ff880000.i2s: Error applying setting, reverse things back
rockchip-i2s ff880000.i2s: bclk disable failed -22
A pin requested for i2s0_8ch_bus_bclk_off has already been requested by
user_led2, so whichever driver probes first will have the pin allocated.
The hardware uses 2-channel i2s so fix this error by setting pinctl-1 to
i2s0_2ch_bus_bclk_off which doesn't contain the pin allocated to user_led2.
I checked the schematics for all Radxa boards based on ROCK Pi 4 and this
change is compatible with all boards.
Fixes: 91419ae0420f ("arm64: dts: rockchip: use BCLK to GPIO switch on rk3399")
Signed-off-by: Christopher Obbard <chris.obbard@collabora.com>
Link: https://lore.kernel.org/r/20231013114737.494410-3-chris.obbard@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3975e72b164dc8347a28dd0d5f11b346af534635 upstream.
Commit 0efaf8078393 ("arm64: dts: rockchip: add i2s0-2ch-bus pins on
rk3399") introduced a pinctl for i2s0 in two-channel mode. Commit
91419ae0420f ("arm64: dts: rockchip: use BCLK to GPIO switch on rk3399")
modified i2s0 to switch the corresponding pins off when idle.
Although an idle pinctrl node was added for i2s0 in 8-channel mode, a
similar idle pinctrl node for i2s0 in 2-channel mode was not added. Add
it.
Fixes: 91419ae0420f ("arm64: dts: rockchip: use BCLK to GPIO switch on rk3399")
Signed-off-by: Christopher Obbard <chris.obbard@collabora.com>
Link: https://lore.kernel.org/r/20231013114737.494410-2-chris.obbard@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ca50ec377c2e94b0a9f8735de2856cd0f13beab4 upstream.
Commit e2ae38cf3d91 ("vhost: fix hung thread due to erroneous iotlb
entries") Forbade vhost iotlb msg with null size to prevent entries
with size = start = 0 and last = ULONG_MAX to end up in the iotlb.
Then commit 95932ab2ea07 ("vhost: allow batching hint without size")
only applied the check for VHOST_IOTLB_UPDATE and VHOST_IOTLB_INVALIDATE
message types to fix a regression observed with batching hit.
Still, the introduction of that check introduced a regression for
some users attempting to invalidate the whole ULONG_MAX range by
setting the size to 0. This is the case with qemu/smmuv3/vhost
integration which does not work anymore. It Looks safe to partially
revert the original commit and allow VHOST_IOTLB_INVALIDATE messages
with null size. vhost_iotlb_del_range() will compute a correct end
iova. Same for vhost_vdpa_iotlb_unmap().
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Fixes: e2ae38cf3d91 ("vhost: fix hung thread due to erroneous iotlb entries")
Cc: stable@vger.kernel.org # v5.17+
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230927140544.205088-1-eric.auger@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 53b08c4985158430fd6d035fb49443bada535210 upstream.
Once VQs are filled with empty buffers and we kick the host, it can send
connection requests. If the_virtio_vsock is not initialized before,
replies are silently dropped and do not reach the host.
virtio_transport_send_pkt() can queue packets once the_virtio_vsock is
set, but they won't be processed until vsock->tx_run is set to true. We
queue vsock->send_pkt_work when initialization finishes to send those
packets queued earlier.
Fixes: 0deab087b16a ("vsock/virtio: use RCU to avoid use-after-free on the_virtio_vsock")
Signed-off-by: Alexandru Matei <alexandru.matei@uipath.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20231024191742.14259-1-alexandru.matei@uipath.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 061b39fdfe7fd98946e67637213bcbb10a318cca upstream.
The function vp_modern_map_capability() takes the size parameter,
which corresponds to the size of virtio_pci_common_cfg. As a result,
this indicates the size of memory area to map.
Now the size is the size of virtio_pci_common_cfg, but some feature(such
as the _F_RING_RESET) needs the virtio_pci_modern_common_cfg, so this
commit changes the size to the size of virtio_pci_modern_common_cfg.
Cc: stable@vger.kernel.org
Fixes: 0b50cece0b78 ("virtio_pci: introduce helper to get/set queue reset")
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Message-Id: <20231010031120.81272-3-xuanzhuo@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fa2e6947aa8844f25f5bad0d8cd1a541d9bc83eb upstream.
MST pointed out: config change callback is also handled incorrectly
in this driver, it takes a mutex from interrupt context.
Handle config changed by work queue instead.
Cc: stable@vger.kernel.org
Cc: Gonglei (Arei) <arei.gonglei@huawei.com>
Cc: Halil Pasic <pasic@linux.ibm.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20231007064309.844889-1-pizhenwei@bytedance.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fab7f259227b8f70aa6d54e1de1a1f5f4729041c upstream.
With the recent removal of vm_dev from devres its memory is only freed
via the callback virtio_mmio_release_dev. However, this only takes
effect after device_add is called by register_virtio_device. Until then
it's an unmanaged resource and must be explicitly freed on error exit.
This bug was discovered and resolved using Coverity Static Analysis
Security Testing (SAST) by Synopsys, Inc.
Cc: stable@vger.kernel.org
Fixes: 55c91fedd03d ("virtio-mmio: don't break lifecycle of vm_dev")
Signed-off-by: Maximilian Heyne <mheyne@amazon.de>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Message-Id: <20230911090328.40538-1-mheyne@amazon.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
[ Upstream commit 2025b2ca8004c04861903d076c67a73a0ec6dfca ]
mcb-lpc requests a fixed-size memory region to parse the chameleon
table, however, if the chameleon table is smaller that the allocated
region, it could overlap with the IP Cores' memory regions.
After parsing the chameleon table, drop/reallocate the memory region
with the actual chameleon table size.
Co-developed-by: Jorge Sanjuan Garcia <jorge.sanjuangarcia@duagon.com>
Signed-off-by: Jorge Sanjuan Garcia <jorge.sanjuangarcia@duagon.com>
Signed-off-by: Javier Rodriguez <josejavier.rodriguez@duagon.com>
Signed-off-by: Johannes Thumshirn <jth@kernel.org>
Link: https://lore.kernel.org/r/20230411083329.4506-4-jth@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a889c276d33d333ae96697510f33533f6e9d9591 ]
The function chameleon_parse_cells() returns the number of cells
parsed which has an undetermined size. This return value is only
used for error checking but the number of cells is never used.
Change return value to be number of bytes parsed to allow for
memory management improvements.
Co-developed-by: Jorge Sanjuan Garcia <jorge.sanjuangarcia@duagon.com>
Signed-off-by: Jorge Sanjuan Garcia <jorge.sanjuangarcia@duagon.com>
Signed-off-by: Javier Rodriguez <josejavier.rodriguez@duagon.com>
Signed-off-by: Johannes Thumshirn <jth@kernel.org>
Link: https://lore.kernel.org/r/20230411083329.4506-2-jth@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c8befdc411e5fd1bf95a13e8744c8ca79b412bee ]
The Qualcomm LPASS LPI pin controller driver uses one lock for guarding
Read-Modify-Write code for slew rate registers. However the pin
configuration and muxing registers have exactly the same RMW code but
are not protected.
Pin controller framework does not provide locking here, thus it is
possible to trigger simultaneous change of pin configuration registers
resulting in non-atomic changes.
Protect from concurrent access by re-using the same lock used to cover
the slew rate register. Using the same lock instead of adding second
one will make more sense, once we add support for newer Qualcomm SoC,
where slew rate is configured in the same register as pin
configuration/muxing.
Fixes: 6e261d1090d6 ("pinctrl: qcom: Add sm8250 lpass lpi pinctrl driver")
Cc: stable@vger.kernel.org
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231013145705.219954-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 69a026a2357ee69983690d07976de44ef26ee38a ]
Make sure to disable and free the regulators on probe errors and on
driver unbind.
Fixes: 16572522aece ("ASoC: codecs: wcd938x-sdw: add SoundWire driver")
Cc: stable@vger.kernel.org # 5.14
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231003155558.27079-5-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 60ba2fda5280528e70fa26b44e36d1530f6d1d7e ]
Replace dev_err() in probe() path with dev_err_probe() to:
1. Make code a bit simpler and easier to read,
2. Do not print messages on deferred probe.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230418074630.8681-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: 69a026a2357e ("ASoC: codecs: wcd938x: fix regulator leaks on probe errors")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7cd686a59b36860511965882dad1f76df2c25766 ]
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20230315150745.67084-57-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: 69a026a2357e ("ASoC: codecs: wcd938x: fix regulator leaks on probe errors")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f19c5a73e6f78d69efce66cfdce31148c76a61a6 ]
Userspace has currently no way of checking the internal R1 response error
bits for some commands. This is a problem for some commands, like RPMB for
example. Typically, we may detect that the busy completion has successfully
ended, while in fact the card did not complete the requested operation.
To fix the problem, let's always poll with CMD13 for these commands and
during the polling, let's also aggregate the R1 response bits. Before
completing the ioctl request, let's propagate the R1 response bits too.
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Co-developed-by: Christian Loehle <christian.loehle@arm.com>
Signed-off-by: Christian Loehle <christian.loehle@arm.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230913112921.553019-1-ulf.hansson@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 568898cbc8b570311b3b94a3202b8233f4168144 ]
SPI doesn't have the usual PROG path we can check for error bits
after moving back to TRAN. Instead it holds the line LOW until
completion. We can then check if the card shows any errors or
is in IDLE state, indicating the line is no longer LOW because
the card was reset.
Signed-off-by: Christian Loehle <cloehle@hyperstone.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/55920f880c9742f486f64aa44e25508e@hyperstone.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Stable-dep-of: f19c5a73e6f7 ("mmc: core: Fix error propagation for some ioctl commands")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 51f5b3056790bc0518e49587996f1e6f3058cca9 ]
Let's align to the common busy polling behaviour for mmc ioctls, by
updating the below two corresponding parts, that comes into play when using
an R1B response for a command.
*) A command with an R1B response should be prepared by calling
mmc_prepare_busy_cmd(), which make us respects the host's busy timeout
constraints.
**) When an R1B response is being used and the host also supports HW busy
detection, we should skip to poll for busy completion.
Suggested-by: Christian Loehle <cloehle@hyperstone.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Christian Loehle <cloehle@hyperstone.com>
Link: https://lore.kernel.org/r/20230213133707.27857-1-ulf.hansson@linaro.org
Stable-dep-of: f19c5a73e6f7 ("mmc: core: Fix error propagation for some ioctl commands")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b29a2acd36dd7a33c63f260df738fb96baa3d4f8 ]
Performance counters are defined to have width less than 64 bits. The
vPMU code maintains the counters in u64 variables but assumes the value
to fit within the defined width. However, for Intel non-full-width
counters (MSR_IA32_PERFCTRx) the value receieved from the guest is
truncated to 32 bits and then sign-extended to full 64 bits. If a
negative value is set, it's sign-extended to 64 bits, but then in
kvm_pmu_incr_counter() it's incremented, truncated, and compared to the
previous value for overflow detection.
That previous value is not truncated, so it always evaluates bigger than
the truncated new one, and a PMI is injected. If the PMI handler writes
a negative counter value itself, the vCPU never quits the PMI loop.
Turns out that Linux PMI handler actually does write the counter with
the value just read with RDPMC, so when no full-width support is exposed
via MSR_IA32_PERF_CAPABILITIES, and the guest initializes the counter to
a negative value, it locks up.
This has been observed in the field, for example, when the guest configures
atop to use perfevents and runs two instances of it simultaneously.
To address the problem, maintain the invariant that the counter value
always fits in the defined bit width, by truncating the received value
in the respective set_msr methods. For better readability, factor the
out into a helper function, pmc_write_counter(), shared by vmx and svm
parts.
Fixes: 9cd803d496e7 ("KVM: x86: Update vPMCs when retiring instructions")
Cc: stable@vger.kernel.org
Signed-off-by: Roman Kagan <rkagan@amazon.de>
Link: https://lore.kernel.org/all/20230504120042.785651-1-rkagan@amazon.de
Tested-by: Like Xu <likexu@tencent.com>
[sean: tweak changelog, s/set/write in the helper]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 2cfaa8b3b7aece3c7b13dd10db20dcea65875692 upstream.
Recently, we noticed that some RST were wrongly generated when removing
the initial subflow.
This patch makes sure RST are not sent when removing any subflows or any
addresses.
Fixes: c2b2ae3925b6 ("mptcp: handle correctly disconnect() failures")
Cc: stable@vger.kernel.org
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231018-send-net-20231018-v1-5-17ecb002e41d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b134a5805455d1886662a6516c965cdb9df9fbcc upstream.
The commit mentioned below was more tolerant with the number of RST seen
during a test because in some uncontrollable situations, multiple RST
can be generated.
But it was not taking into account the case where no RST are expected:
this validation was then no longer reporting issues for the 0 RST case
because it is not possible to have less than 0 RST in the counter. This
patch fixes the issue by adding a specific condition.
Fixes: 6bf41020b72b ("selftests: mptcp: update and extend fastclose test-cases")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231018-send-net-20231018-v1-1-17ecb002e41d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 14c56686a64c65ba716ff48f1f4b19c85f4cb2a9 upstream.
When closing the first subflow, the MPTCP protocol unconditionally
calls tcp_disconnect(), which in turn generates a reset if the subflow
is established.
That is unexpected and different from what MPTCP does with MPJ
subflows, where resets are generated only on FASTCLOSE and other edge
scenarios.
We can't reuse for the first subflow the same code in place for MPJ
subflows, as MPTCP clean them up completely via a tcp_close() call,
while must keep the first subflow socket alive for later re-usage, due
to implementation constraints.
This patch adds a new helper __mptcp_subflow_disconnect() that
encapsulates, a logic similar to tcp_close, issuing a reset only when
the MPTCP_CF_FASTCLOSE flag is set, and performing a clean shutdown
otherwise.
Fixes: c2b2ae3925b6 ("mptcp: handle correctly disconnect() failures")
Cc: stable@vger.kernel.org
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231018-send-net-20231018-v1-4-17ecb002e41d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cb3871b1cd135a6662b732fbc6b3db4afcdb4a64 upstream.
The code pattern of memcpy(dst, src, strlen(src)) is almost always
wrong. In this case it is wrong because it leaves memory uninitialized
if it is less than sizeof(ni->name), and overflows ni->name when longer.
Normally strtomem_pad() could be used here, but since ni->name is a
trailing array in struct hci_mon_new_index, compilers that don't support
-fstrict-flex-arrays=3 can't tell how large this array is via
__builtin_object_size(). Instead, open-code the helper and use sizeof()
since it will work correctly.
Additionally mark ni->name as __nonstring since it appears to not be a
%NUL terminated C string.
Cc: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Cc: Edward AD <twuufnxlz@gmail.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: linux-bluetooth@vger.kernel.org
Cc: netdev@vger.kernel.org
Fixes: 18f547f3fc07 ("Bluetooth: hci_sock: fix slab oob read in create_monitor_event")
Link: https://lore.kernel.org/lkml/202310110908.F2639D3276@keescook/
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 18f547f3fc074500ab5d419cf482240324e73a7e upstream.
When accessing hdev->name, the actual string length should prevail
Reported-by: syzbot+c90849c50ed209d77689@syzkaller.appspotmail.com
Fixes: dcda165706b9 ("Bluetooth: hci_core: Fix build warnings")
Signed-off-by: Edward AD <twuufnxlz@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8e15aee621618a3ee3abecaf1fd8c1428098b7ef upstream.
The altname nodes are currently not moved to the new netns
when netdevice itself moves:
[ ~]# ip netns add test
[ ~]# ip -netns test link add name eth0 type dummy
[ ~]# ip -netns test link property add dev eth0 altname some-name
[ ~]# ip -netns test link show dev some-name
2: eth0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 1e:67:ed:19:3d:24 brd ff:ff:ff:ff:ff:ff
altname some-name
[ ~]# ip -netns test link set dev eth0 netns 1
[ ~]# ip link
...
3: eth0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 02:40:88:62:ec:b8 brd ff:ff:ff:ff:ff:ff
altname some-name
[ ~]# ip li show dev some-name
Device "some-name" does not exist.
Remove them from the hash table when device is unlisted
and add back when listed again.
Fixes: 36fbf1e52bd3 ("net: rtnetlink: add linkprop commands to add and delete alternative ifnames")
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 3b384cc74b00b5ac21d18e4c1efc3c1da5300971 ]
Looks like the driver sleep pins configuration is unusable. Adding the
sleep pins causes the usb phy to not respond. We need to use the default
pins in probe, and only set sleep pins at phy_mdm6600_device_power_off().
As the modem can also be booted to a serial port mode for firmware
flashing, let's make the pin changes limited to probe and remove. For
probe, we get the default pins automatically. We only need to set the
sleep pins in phy_mdm6600_device_power_off() to prevent the modem from
waking up because the gpio line glitches.
If it turns out that we need a separate state for phy_mdm6600_power_on()
and phy_mdm6600_power_off(), we can use the pinctrl idle state.
Cc: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Fixes: 2ad2af081622 ("phy: mapphone-mdm6600: Improve phy related runtime PM calls")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20230913060433.48373-3-tony@atomide.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b99e0ba9633af51638e5ee1668da2e33620c134f ]
Otherwise we will get an underflow on remove.
Cc: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Fixes: f7f50b2a7b05 ("phy: mapphone-mdm6600: Add runtime PM support for n_gsm on USB suspend")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20230913060433.48373-2-tony@atomide.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 719606154c7033c068a5d4c1dc5f9163b814b3c8 ]
Commit d644e0d79829 ("phy: mapphone-mdm6600: Fix PM error handling in
phy_mdm6600_probe") caused a regression where we now unconditionally
disable runtime PM at the end of the probe while it is only needed on
errors.
Cc: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Miaoqian Lin <linmq006@gmail.com>
Cc: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Fixes: d644e0d79829 ("phy: mapphone-mdm6600: Fix PM error handling in phy_mdm6600_probe")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20230913060433.48373-1-tony@atomide.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 430232619791e7de95191f2cd8ebaa4c380d17d0 ]
Add flag IRQCHIP_MASK_ON_SUSPEND to make sure gpio irq is masked on
suspend, if lack this flag, current irq arctitecture will not mask
the irq, and these unmasked gpio irq will wrongly wakeup the system
even they are not config as wakeup source.
Also add flag IRQCHIP_ENABLE_WAKEUP_ON_SUSPEND to make sure the gpio
irq which is configed as wakeup source can work as expect.
Fixes: 7f2691a19627 ("gpio: vf610: add gpiolib/IRQ chip driver for Vybrid")
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e6ef4f8ede09f4af7cde000717b349b50bc62576 ]
Since recently, the kernel is nagging about mutable irq_chips:
"not an immutable chip, please consider fixing it!"
Drop the unneeded copy, flag it as IRQCHIP_IMMUTABLE, add the new
helper functions and call the appropriate gpiolib functions.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Stable-dep-of: 430232619791 ("gpio: vf610: mask the gpio irq in system suspend and support wakeup")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b022f0c7e404887a7c5229788fc99eff9f9a80d5 ]
When a kprobe is attached to a function that's name is not unique (is
static and shares the name with other functions in the kernel), the
kprobe is attached to the first function it finds. This is a bug as the
function that it is attaching to is not necessarily the one that the
user wants to attach to.
Instead of blindly picking a function to attach to what is ambiguous,
error with EADDRNOTAVAIL to let the user know that this function is not
unique, and that the user must use another unique function with an
address offset to get to the function they want to attach to.
Link: https://lore.kernel.org/all/20231020104250.9537-2-flaniel@linux.microsoft.com/
Cc: stable@vger.kernel.org
Fixes: 413d37d1eb69 ("tracing: Add kprobe-based event tracer")
Suggested-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Francis Laniel <flaniel@linux.microsoft.com>
Link: https://lore.kernel.org/lkml/20230819101105.b0c104ae4494a7d1f2eea742@kernel.org/
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4dc533e0f2c04174e1ae4aa98e7cffc1c04b9998 ]
Function kallsyms_on_each_symbol() traverses all symbols and submits each
symbol to the hook 'fn' for judgment and processing. For some cases, the
hook actually only handles the matched symbol, such as livepatch.
Because all symbols are currently sorted by name, all the symbols with the
same name are clustered together. Function kallsyms_lookup_names() gets
the start and end positions of the set corresponding to the specified
name. So we can easily and quickly traverse all the matches.
The test results are as follows (twice): (x86)
kallsyms_on_each_match_symbol: 7454, 7984
kallsyms_on_each_symbol : 11733809, 11785803
kallsyms_on_each_match_symbol() consumes only 0.066% of
kallsyms_on_each_symbol()'s time. In other words, 1523x better
performance.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Stable-dep-of: b022f0c7e404 ("tracing/kprobes: Return EADDRNOTAVAIL when func matches several symbols")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 19bd8981dc2ee35fdc81ab1b0104b607c917d470 ]
kallsyms_seqs_of_names[] records the symbol index sorted by address, the
maximum value in kallsyms_seqs_of_names[] is the number of symbols. And
2^24 = 16777216, which means that three bytes are enough to store the
index. This can help us save (1 * kallsyms_num_syms) bytes of memory.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Stable-dep-of: b022f0c7e404 ("tracing/kprobes: Return EADDRNOTAVAIL when func matches several symbols")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit ae62c49c0ceff20dc7c1fad4a5b8f91d64b4f628 upstream.
The new uart_write() function is only called from suspend/resume code, causing
a build warning when those are left out:
drivers/tty/serial/8250/8250_omap.c:169:13: error: 'uart_write' defined but not used [-Werror=unused-function]
Remove the #ifdefs and use the modern pm_ops/pm_sleep_ops and their wrappers
to let the compiler see where it's used but still drop the dead code.
Fixes: 398cecc24846 ("serial: 8250: omap: Fix imprecise external abort for omap_8250_pm()")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20230517202012.634386-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 7b821db95140e2c118567aee22a78bf85f3617e0 ]
The kernel produces a warning splat and the DSI device fails to register
in this driver if the i2c driver probes, populates child auxiliary
devices, and then somewhere in ti_sn_bridge_probe() a function call
returns -EPROBE_DEFER. When the auxiliary driver probe defers, the dsi
device created by devm_mipi_dsi_device_register_full() is left
registered because the devm managed device used to manage the lifetime
of the DSI device is the parent i2c device, not the auxiliary device
that is being probed.
Associate the DSI device created and managed by this driver to the
lifetime of the auxiliary device, not the i2c device, so that the DSI
device is removed when the auxiliary driver unbinds. Similarly change
the device pointer used for dev_err_probe() so the deferred probe errors
are associated with the auxiliary device instead of the parent i2c
device so we can narrow down future problems faster.
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Maxime Ripard <maxime@cerno.tech>
Fixes: c3b75d4734cb ("drm/bridge: sn65dsi86: Register and attach our DSI device at probe")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231002235407.769399-1-swboyd@chromium.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aa6464edbd51af4a2f8db43df866a7642b244b5f ]
Free the "priv" pointer before returning the error code.
Fixes: 90eb6b59d311 ("ASoC: pxa-ssp: add support for an external clock in devicetree")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/84ac2313-1420-471a-b2cb-3269a2e12a7c@moroto.mountain
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit fc363413ef8ea842ae7a99e3caf5465dafdd3a49 upstream.
We found a glitch when configuring the pad as output high. To avoid this
glitch, move the data value setting before direction config in the
function vf610_gpio_direction_output().
Fixes: 659d8a62311f ("gpio: vf610: add imx7ulp support")
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
[Bartosz: tweak the commit message]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 235985d1763f7aba92c1c64e5f5aaec26c2c9b18 upstream.
Newer Asus laptops send the following new WMI event codes when some
of the F1 - F12 "media" hotkeys are pressed:
0x2a Screen Capture
0x2b PrintScreen
0x2c CapsLock
Map 0x2a to KEY_SELECTIVE_SCREENSHOT mirroring how similar hotkeys
are mapped on other laptops.
PrintScreem and CapsLock are also reported as normal PS/2 keyboard events,
map these event codes to KE_IGNORE to avoid "Unknown key code 0x%x\n" log
messages.
Reported-by: James John <me@donjajo.com>
Closes: https://lore.kernel.org/platform-driver-x86/a2c441fe-457e-44cf-a146-0ecd86b037cf@donjajo.com/
Closes: https://bbs.archlinux.org/viewtopic.php?pid=2123716
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231017090725.38163-4-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a5b92be2482e5f9ef30be4e4cda12ed484381493 upstream.
Older Asus laptops change the backlight level themselves and then send
WMI events with different codes for different backlight levels.
The asus-wmi.c code maps the entire range of codes reported on
brightness down keypresses to an internal ASUS_WMI_BRN_DOWN code:
define NOTIFY_BRNUP_MIN 0x11
define NOTIFY_BRNUP_MAX 0x1f
define NOTIFY_BRNDOWN_MIN 0x20
define NOTIFY_BRNDOWN_MAX 0x2e
if (code >= NOTIFY_BRNUP_MIN && code <= NOTIFY_BRNUP_MAX)
code = ASUS_WMI_BRN_UP;
else if (code >= NOTIFY_BRNDOWN_MIN && code <= NOTIFY_BRNDOWN_MAX)
code = ASUS_WMI_BRN_DOWN;
This mapping is causing issues on new laptop models which actually
send 0x2b events for printscreen presses and 0x2c events for
capslock presses, which get translated into spurious brightness-down
presses.
This mapping is really only necessary when asus-wmi has registered
a backlight-device for backlight control. In this case the mapping
was used to decide to filter out the keypresss since in this case
the firmware has already modified the brightness itself and instead
of reporting a keypress asus-wmi will just report the new brightness
value to userspace.
OTOH when the firmware does not adjust the brightness itself then
it seems to always report 0x2e for brightness-down presses and
0x2f for brightness up presses independent of the actual brightness
level. So in this case the mapping of the code is not necessary
and this translation actually leads to spurious brightness-down
presses being send to userspace when pressing printscreen or capslock.
Modify asus_wmi_handle_event_code() to only do the mapping
when using asus-wmi backlight control to fix the spurious
brightness-down presses.
Reported-by: James John <me@donjajo.com>
Closes: https://lore.kernel.org/platform-driver-x86/a2c441fe-457e-44cf-a146-0ecd86b037cf@donjajo.com/
Closes: https://bbs.archlinux.org/viewtopic.php?pid=2123716
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231017090725.38163-3-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f37cc2fc277b371fc491890afb7d8a26e36bb3a1 upstream.
Older Asus laptops change the backlight level themselves and then send
WMI events with different codes for different backlight levels.
The asus-wmi.c code maps the entire range of codes reported on
brightness down keypresses to an internal ASUS_WMI_BRN_DOWN code:
define NOTIFY_BRNUP_MIN 0x11
define NOTIFY_BRNUP_MAX 0x1f
define NOTIFY_BRNDOWN_MIN 0x20
define NOTIFY_BRNDOWN_MAX 0x2e
if (code >= NOTIFY_BRNUP_MIN && code <= NOTIFY_BRNUP_MAX)
code = ASUS_WMI_BRN_UP;
else if (code >= NOTIFY_BRNDOWN_MIN && code <= NOTIFY_BRNDOWN_MAX)
code = ASUS_WMI_BRN_DOWN;
Before this commit all the NOTIFY_BRNDOWN_MIN - NOTIFY_BRNDOWN_MAX
aka 0x20 - 0x2e events were mapped to 0x20.
This mapping is causing issues on new laptop models which actually
send 0x2b events for printscreen presses and 0x2c events for
capslock presses, which get translated into spurious brightness-down
presses.
The plan is disable the 0x11-0x2e special mapping on laptops
where asus-wmi does not register a backlight-device to avoid
the spurious brightness-down keypresses. New laptops always send
0x2e for brightness-down presses, change the special internal
ASUS_WMI_BRN_DOWN value from 0x20 to 0x2e to match this in
preparation for fixing the spurious brightness-down presses.
This change does not have any functional impact since all
of 0x20 - 0x2e is mapped to ASUS_WMI_BRN_DOWN first and only
then checked against the keymap code and the new 0x2e
value is still in the 0x20 - 0x2e range.
Reported-by: James John <me@donjajo.com>
Closes: https://lore.kernel.org/platform-driver-x86/a2c441fe-457e-44cf-a146-0ecd86b037cf@donjajo.com/
Closes: https://bbs.archlinux.org/viewtopic.php?pid=2123716
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231017090725.38163-2-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4d73c6772ab771cbbe7e46a73e7c78ba490350fa upstream.
When the current uncore frequency can't be read, don't create attribute
"current_freq_khz" as any read will fail later. Some user space
applications like turbostat fail to continue with the failure. So, check
error during attribute creation.
Fixes: 414eef27283a ("platform/x86/intel/uncore-freq: Display uncore current frequency")
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231004181915.1887913-1-srinivas.pandruvada@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fe0e04cf66a12ffe6d1b43725ddaabd5599d024f upstream.
If platform_profile_register() fails, the driver does not propagate
the error, but instead probes successfully. This means when the driver
unbinds, the a warning might be issued by platform_profile_remove().
Fix this by propagating the error back to the caller of
surface_platform_profile_probe().
Compile-tested only.
Fixes: b78b4982d763 ("platform/surface: Add platform profile driver")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Tested-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20231014235449.288702-1-W_Armin@gmx.de
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 63e8b94ad1840f02462633abdb363397f56bc642 upstream.
When dma_set_coherent_mask() fails, sch->lock has not been
freed, which is allocated in css_sch_create_locks(), leading
to a memleak.
Fixes: 4520a91a976e ("s390/cio: use dma helpers for setting masks")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Message-Id: <20230921071412.13806-1-dinghao.liu@zju.edu.cn>
Link: https://lore.kernel.org/linux-s390/bd38baa8-7b9d-4d89-9422-7e943d626d6e@linux.ibm.com/
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 03b80ff8023adae6780e491f66e932df8165e3a0 upstream.
If name_show() is non unique, this test will try to install a kprobe on this
function which should fail returning EADDRNOTAVAIL.
On kernel where name_show() is not unique, this test is skipped.
Link: https://lore.kernel.org/all/20231020104250.9537-3-flaniel@linux.microsoft.com/
Cc: stable@vger.kernel.org
Signed-off-by: Francis Laniel <flaniel@linux.microsoft.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c1ae1c59c8c6e0b66a718308c623e0cb394dab6b upstream.
Since the fixed commits both zdev->iommu_bitmap and zdev->lazy_bitmap
are allocated as vzalloc(zdev->iommu_pages / 8). The problem is that
zdev->iommu_bitmap is a pointer to unsigned long but the above only
yields an allocation that is a multiple of sizeof(unsigned long) which
is 8 on s390x if the number of IOMMU pages is a multiple of 64.
This in turn is the case only if the effective IOMMU aperture is
a multiple of 64 * 4K = 256K. This is usually the case and so didn't
cause visible issues since both the virt_to_phys(high_memory) reduced
limit and hardware limits use nice numbers.
Under KVM, and in particular with QEMU limiting the IOMMU aperture to
the vfio DMA limit (default 65535), it is possible for the reported
aperture not to be a multiple of 256K however. In this case we end up
with an iommu_bitmap whose allocation is not a multiple of
8 causing bitmap operations to access it out of bounds.
Sadly we can't just fix this in the obvious way and use bitmap_zalloc()
because for large RAM systems (tested on 8 TiB) the zdev->iommu_bitmap
grows too large for kmalloc(). So add our own bitmap_vzalloc() wrapper.
This might be a candidate for common code, but this area of code will
be replaced by the upcoming conversion to use the common code DMA API on
s390 so just add a local routine.
Fixes: 224593215525 ("s390/pci: use virtual memory for iommu bitmap")
Fixes: 13954fd6913a ("s390/pci_dma: improve lazy flush for unmap")
Cc: stable@vger.kernel.org
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
