IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
If a btree_trans is in use it's supposed to be passed to fsck_err so
that it can be unlocked if we're waiting on userspace input; but the
btree IO paths do call fsck errors where a btree_trans exists on the
stack but it's not passed through.
But it's ok, because it's unlocked while doing IO.
Fixes: a850bde6498b ("bcachefs: fsck_err() may now take a btree_trans")
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Shifting a negative value left is undefined.
Signed-off-by: Tavian Barnes <tavianator@tavianator.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
- Enable the named address spaces based percpu accessors optimization
on all GCC versions that contain this feature, detected through
a build-time testcase. This effectively enables the feature on
GCC 6, GCC 7 and GCC 8 versions.
- Fix operand constraint modifier in __raw_cpu_write()
- Reorganize the per-CPU headers for better readability
- Misc cleanups and fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Icfc
-----END PGP SIGNATURE-----
Merge tag 'x86-percpu-2024-07-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 percpu updates from Ingo Molnar:
- Enable the named address spaces based percpu accessors optimization
on all GCC versions that contain this feature, detected through a
build-time testcase.
This effectively enables the feature on GCC 6, GCC 7 and GCC 8
versions.
- Fix operand constraint modifier in __raw_cpu_write()
- Reorganize the per-CPU headers for better readability
- Misc cleanups and fixes
* tag 'x86-percpu-2024-07-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/percpu: Enable named address spaces for all capable GCC versions
x86/percpu: Clean up <asm/percpu.h> vertical alignment details
x86/percpu: Clean up <asm/percpu.h> a bit
x86/percpu: Move some percpu accessors around to reduce ifdeffery
x86/percpu: Rename percpu_stable_op() to __raw_cpu_read_stable()
x86/percpu: Fix operand constraint modifier in __raw_cpu_write()
x86/percpu: Introduce the __raw_cpu_read_const() macro
x86/percpu: Unify percpu read-write accessors
x86/percpu: Move some percpu macros around for readability
x86/percpu: Introduce the pcpu_binary_op() macro
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEe7vIQRWZI0iWSE3xu+CwddJFiJoFAmaXl0kACgkQu+CwddJF
iJrOlgf+N/G7BmgoW2CBF7mKsvCYs+pX3xeBuxPtsuq4FD386nsPFMN8gWAYLG3q
ZU1z1S+0M8LhTg6/G9jMYLHt2Y7WhYbhFTjTHmULJkuhMDTUP9CRYy4XZ+hdPtHF
30ezSdJQF9x/XxCSaaRVK1s+SMVHFg5xAOHKpfkNSamcMz9g+ZkYyPBr10/VoKd0
JqwhW7r6hrlvWAiqY3QKCOvohIWglgvBUnNjUGMh1cUkOE2aYLYHklhRwICKgA6z
p/2BUXiAEWUtgBkUrizwm/pdhJXLs0pOeYarVZP1v83tQMxyrc6XLNnqhvxP3DPW
31thF5Rf9I8WaWTczXhxsAwFjqO3KQ==
=4uf9
-----END PGP SIGNATURE-----
Merge tag 'slab-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab updates from Vlastimil Babka:
"The most prominent change this time is the kmem_buckets based
hardening of kmalloc() allocations from Kees Cook.
We have also extended the kmalloc() alignment guarantees for
non-power-of-two sizes in a way that benefits rust.
The rest are various cleanups and non-critical fixups.
- Dedicated bucket allocator (Kees Cook)
This series [1] enhances the probabilistic defense against heap
spraying/grooming of CONFIG_RANDOM_KMALLOC_CACHES from last year.
kmalloc() users that are known to be useful for exploits can get
completely separate set of kmalloc caches that can't be shared with
other users. The first converted users are alloc_msg() and
memdup_user().
The hardening is enabled by CONFIG_SLAB_BUCKETS.
- Extended kmalloc() alignment guarantees (Vlastimil Babka)
For years now we have guaranteed natural alignment for power-of-two
allocations, but nothing was defined for other sizes (in practice,
we have two such buckets, kmalloc-96 and kmalloc-192).
To avoid unnecessary padding in the rust layer due to its alignment
rules, extend the guarantee so that the alignment is at least the
largest power-of-two divisor of the requested size.
This fits what rust needs, is a superset of the existing
power-of-two guarantee, and does not in practice change the layout
(and thus does not add overhead due to padding) of the kmalloc-96
and kmalloc-192 caches, unless slab debugging is enabled for them.
- Cleanups and non-critical fixups (Chengming Zhou, Suren
Baghdasaryan, Matthew Willcox, Alex Shi, and Vlastimil Babka)
Various tweaks related to the new alloc profiling code, folio
conversion, debugging and more leftovers after SLAB"
Link: https://lore.kernel.org/all/20240701190152.it.631-kees@kernel.org/ [1]
* tag 'slab-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
mm/memcg: alignment memcg_data define condition
mm, slab: move prepare_slab_obj_exts_hook under CONFIG_MEM_ALLOC_PROFILING
mm, slab: move allocation tagging code in the alloc path into a hook
mm/util: Use dedicated slab buckets for memdup_user()
ipc, msg: Use dedicated slab buckets for alloc_msg()
mm/slab: Introduce kmem_buckets_create() and family
mm/slab: Introduce kvmalloc_buckets_node() that can take kmem_buckets argument
mm/slab: Plumb kmem_buckets into __do_kmalloc_node()
mm/slab: Introduce kmem_buckets typedef
slab, rust: extend kmalloc() alignment guarantees to remove Rust padding
slab: delete useless RED_INACTIVE and RED_ACTIVE
slab: don't put freepointer outside of object if only orig_size
slab: make check_object() more consistent
mm: Reduce the number of slab->folio casts
mm, slab: don't wrap internal functions with alloc_hooks()
* reserve_mem command line parameter to allow creation of named memory
reservation at boot time.
The driving use-case is to improve the ability of pstore to retain
ramoops data across reboots.
* cleaunps and small improvements in memblock and mm_init
* new tests cases in memblock test suite
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEeOVYVaWZL5900a/pOQOGJssO/ZEFAmaXfoIQHHJwcHRAa2Vy
bmVsLm9yZwAKCRA5A4Ymyw79kU5mCAC23vIrB8FRlORczMYj+V3VFss3OjKT92lS
fHGwq2oxHW+rdDpHXFObHU0D3k8d2l5jyrENRAAyA02qR0L6Pv8Na6pGxQua1eic
VIdw0PFQMsizD1AIj84Y6skkyyF/tvZHpmX0B12D5+Ur65DC/Z867Cm/lE33/fHv
/1+QB0JlG7W+FzxVstYyebY5/DVkH+bC7/A57FE2oB4BRXjEd8v9tTHBS4kRSvrE
zE2KFxeGajN749LHztIpIprPKehu8Gc3oLrYLNJO+uLFVCV8ey3OqVj0RXMG2wLl
hmVYqhbZM/Uz59D/P8pULD49f1Thjv/5A/MvUZ3SxM6zpWlsincf
=xrZd
-----END PGP SIGNATURE-----
Merge tag 'memblock-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock updates from Mike Rapoport:
- 'reserve_mem' command line parameter to allow creation of named
memory reservation at boot time.
The driving use-case is to improve the ability of pstore to retain
ramoops data across reboots.
- cleanups and small improvements in memblock and mm_init
- new tests cases in memblock test suite
* tag 'memblock-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock tests: fix implicit declaration of function 'numa_valid_node'
memblock: Move late alloc warning down to phys alloc
pstore/ramoops: Add ramoops.mem_name= command line option
mm/memblock: Add "reserve_mem" to reserved named memory at boot up
mm/mm_init.c: don't initialize page->lru again
mm/mm_init.c: not always search next deferred_init_pfn from very beginning
mm/mm_init.c: use deferred_init_mem_pfn_range_in_zone() to decide loop condition
mm/mm_init.c: get the highest zone directly
mm/mm_init.c: move nr_initialised reset down a bit
mm/memblock: fix a typo in description of for_each_mem_region()
mm/mm_init.c: use memblock_region_memory_base_pfn() to get startpfn
mm/memblock: use PAGE_ALIGN_DOWN to get pgend in free_memmap
mm/memblock: return true directly on finding overlap region
memblock tests: add memblock_overlaps_region_checks
mm/memblock: fix comment for memblock_isolate_range()
memblock tests: add memblock_reserve_many_may_conflict_check()
memblock tests: add memblock_reserve_all_locations_check()
mm/memblock: remove empty dummy entry
Build
-----
* Build each directory as a library so that depedency check for the
python extension module can be automatic. But it also introduces
some trivial merge conflicts with other trees that touched perf tools
codes. Basically it changes perf-y to perf-util-y or similar and you
can find the resolution in the perf-next tree here.
- https://lore.kernel.org/r/Zn8HeRRX3JV2IcxQ@sirena.org.uk
- https://lore.kernel.org/r/20240709100536.238f4d12@canb.auug.org.au
* Use pkg-config to check libtraceevent and libtracefs.
perf sched
----------
* Add --task-name and --fuzzy-name options for `perf sched map`. It's
to focus on selected tasks only by removing unrelated tasks in the
output. It matches the task comm with the given string and the
--fuzzy-name option allows the partial matching.
$ sudo perf sched record -a sleep 1
$ sudo perf sched map --task-name kworker --fuzzy-name
. . . . - *A0 . . 481065.315131 secs A0 => kworker/5:2-i91:438521
. . . . - *- . . 481065.315160 secs
*B0 . . . - . . . 481065.316435 secs B0 => kworker/0:0-i91:437860
*- . . . . . . . 481065.316441 secs
. . . . . *A0 . . 481065.318703 secs
. . . . . *- . . 481065.318717 secs
. . *C0 . . . . . 481065.320544 secs C0 => kworker/u16:30-:430186
. . *- . . . . . 481065.320555 secs
. . *D0 . . . . . 481065.328524 secs D0 => kworker/2:0-kdm:429654
*B0 . D0 . - . . . 481065.328527 secs
*- . D0 . - . . . 481065.328535 secs
. . *- . . . . . 481065.328535 secs
* Fix -r/--repeat option of perf sched replay. The documentation said
-1 will work as infinity but it didn't accept the value. Update the
code and document to use 0 instead.
* Fix perf sched timehist to account the delay time for preempted tasks.
Perf event filtering
--------------------
* perf top gained filtering support on regular events using BPF like
perf record. Previously it was able to use it for tracepoints only.
* The BPF filter now supports filtering by UID/GID. This should be
preferred than -u <UID> option as it's racy to scan /proc to check
tasks for the user and fails to open an event for the task if it's
already gone.
$ sudo perf top -e cycles --filter "uid == $(id -u)"
perf report
-----------
* Skip dummy events in the group output by default. The --skip-empty
option controls display of empty events without samples. But perf
report can force display all events in a group. In this case, auto-
added a dummy event (for a system-wide record) ends up in the output.
Now it can skip those empty events even in the group display mode.
To preserve the old behavior, run this:
$ perf report --group --no-skip-empty
perf stat
---------
* Choose the most disaggregate option when multiple aggregation options
are given. It used to pick the last option in the command line but
it can be confusing and not consistent. Now it'll choose the smallest
unit.
For example, it'd aggregate the result per-core when the user gave
both --per-socket and --per-core options at the same time.
Internals
---------
* Fix `perf bench` when some CPUs are offline.
* Fix handling of JIT symbol mappings to accept "/tmp/perf-${PID}.map
patterns only so that it can not be confused by other /tmp/perf-*
files.
* Many improvements and fixes for `perf test`.
Others
------
* Support some new instructions for Intel-PT.
* Fix syscall ID mapping in perf trace.
* Document AMD IBS PMU usages.
* Change `perf lock info` to show map and thread info by default.
Vendor JSON events
------------------
* Update Intel events and metrics
* Add i.MX9[35] DDR metrics
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSo2x5BnqMqsoHtzsmMstVUGiXMgwUCZpbe+QAKCRCMstVUGiXM
g4X6AQCXJ+eCuBy/9IvDpo86KjemPQk/brA0X8Ufi7JCd+Vj4QD7BvDobClewn+v
W3MhNQwIlFPJ8u3Act+tJZfUJjVF4wU=
=ZkPv
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-for-v6.11-2024-07-16' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools updates from Namhyung Kim:
"Build:
- Build each directory as a library so that depedency check for the
python extension module can be automatic
- Use pkg-config to check libtraceevent and libtracefs
perf sched:
- Add --task-name and --fuzzy-name options for `perf sched map`
It focuses on selected tasks only by removing unrelated tasks in
the output. It matches the task comm with the given string and the
--fuzzy-name option allows the partial matching:
$ sudo perf sched record -a sleep 1
$ sudo perf sched map --task-name kworker --fuzzy-name
. . . . - *A0 . . 481065.315131 secs A0 => kworker/5:2-i91:438521
. . . . - *- . . 481065.315160 secs
*B0 . . . - . . . 481065.316435 secs B0 => kworker/0:0-i91:437860
*- . . . . . . . 481065.316441 secs
. . . . . *A0 . . 481065.318703 secs
. . . . . *- . . 481065.318717 secs
. . *C0 . . . . . 481065.320544 secs C0 => kworker/u16:30-:430186
. . *- . . . . . 481065.320555 secs
. . *D0 . . . . . 481065.328524 secs D0 => kworker/2:0-kdm:429654
*B0 . D0 . - . . . 481065.328527 secs
*- . D0 . - . . . 481065.328535 secs
. . *- . . . . . 481065.328535 secs
- Fix -r/--repeat option of perf sched replay
The documentation said -1 will work as infinity but it didn't
accept the value. Update the code and document to use 0 instead
- Fix perf sched timehist to account the delay time for preempted
tasks
Perf event filtering:
- perf top gained filtering support on regular events using BPF like
perf record. Previously it was able to use it for tracepoints only
- The BPF filter now supports filtering by UID/GID. This should be
preferred than -u <UID> option as it's racy to scan /proc to check
tasks for the user and fails to open an event for the task if it's
already gone
$ sudo perf top -e cycles --filter "uid == $(id -u)"
perf report:
- Skip dummy events in the group output by default. The --skip-empty
option controls display of empty events without samples. But perf
report can force display all events in a group
In this case, auto-added a dummy event (for a system-wide record)
ends up in the output. Now it can skip those empty events even in
the group display mode
To preserve the old behavior, run this:
$ perf report --group --no-skip-empty
perf stat:
- Choose the most disaggregate option when multiple aggregation
options are given. It used to pick the last option in the command
line but it can be confusing and not consistent. Now it'll choose
the smallest unit
For example, it'd aggregate the result per-core when the user gave
both --per-socket and --per-core options at the same time
Internals:
- Fix `perf bench` when some CPUs are offline
- Fix handling of JIT symbol mappings to accept "/tmp/perf-${PID}.map
patterns only so that it can not be confused by other /tmp/perf-*
files
- Many improvements and fixes for `perf test`
Others:
- Support some new instructions for Intel-PT
- Fix syscall ID mapping in perf trace
- Document AMD IBS PMU usages
- Change `perf lock info` to show map and thread info by default
Vendor JSON events:
- Update Intel events and metrics
- Add i.MX9[35] DDR metrics"
* tag 'perf-tools-for-v6.11-2024-07-16' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (125 commits)
perf trace: Fix iteration of syscall ids in syscalltbl->entries
perf dso: Fix address sanitizer build
perf mem: Warn if memory events are not supported on all CPUs
perf arm-spe: Support multiple Arm SPE PMUs
perf build x86: Fix SC2034 error in syscalltbl.sh
perf record: Fix memset out-of-range error
perf sched map: Add --fuzzy-name option for fuzzy matching in task names
perf sched map: Add support for multiple task names using CSV
perf sched map: Add task-name option to filter the output map
perf build: Conditionally add feature check flags for libtrace{event,fs}
perf install: Don't propagate subdir to Documentation submake
perf vendor events arm64:: Add i.MX95 DDR Performance Monitor metrics
perf vendor events arm64:: Add i.MX93 DDR Performance Monitor metrics
perf dsos: When adding a dso into sorted dsos maintain the sort order
perf comm str: Avoid sort during insert
perf report: Calling available function for stats printing
perf intel-pt: Fix exclude_guest setting
perf intel-pt: Fix aux_watermark calculation for 64-bit size
perf sched replay: Fix -r/--repeat command line option for infinity
perf: pmus: Remove unneeded semicolon
...
- Update Daniel Bristot de Oliveira's entry in MAINTAINERS with respect to
his tracing code.
- Add more credits to him in CREDITS file and move his entry to be
alphabetical.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZpf0sxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qhJuAQDQjkZfiOmtJK8dloFZnHoLfvueoGet
VrTMVwkyKZpwJAD/SdigAGb38ld/wePmV4Jsmg+fIR8f//elozzYv4ylfQA=
=+lKf
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing CREDITS file update from Steven Rostedt:
"Update of MAINTAINERS and CREDITS file
- Update Daniel Bristot de Oliveira's entry in MAINTAINERS with
respect to his tracing code.
- Add more credits to him in CREDITS file and move his entry to be
alphabetical"
* tag 'trace-v6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Update MAINTAINERS file
- Use pretty formatting only on interactive tty in rtla/osnoise
- Better reporting when histogram is empty in rtla/osnoise
- Use the correct library name for "libtracefs" in feature detection
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZpbYbRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qpWSAQD69Ea2bOCRuqCW6mjH4iPgWA3Re4Xt
rnUI3mWT7+FSNwD/T1ElUQ8/mfJptawZl1KyACNovtE1xMn365yHsFA2Mgg=
=fnCa
-----END PGP SIGNATURE-----
Merge tag 'trace-tools-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing tools updates from Steven Rostedt:
"Trivial updates for 6.11:
- Use pretty formatting only on interactive tty in rtla/osnoise
- Better reporting when histogram is empty in rtla/osnoise
- Use the correct library name for "libtracefs" in feature detection"
* tag 'trace-tools-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tools: build: use correct lib name for libtracefs feature detection
rtla/osnoise: Better report when histogram is empty
rtla/osnoise: Use pretty formatting only on interactive tty
Up until now, the function graph tracer could only have a single user
attached to it. If another user tried to attach to the function graph
tracer while one was already attached, it would fail. Allowing function
graph tracer to have more than one user has been asked for since 2009, but
it required a rewrite to the logic to pull it off so it never happened.
Until now!
There's three systems that trace the return of a function. That is
kretprobes, function graph tracer, and BPF. kretprobes and function graph
tracing both do it similarly. The difference is that kretprobes uses a
shadow stack per callback and function graph tracer creates a shadow stack
for all tasks. The function graph tracer method makes it possible to trace
the return of all functions. As kretprobes now needs that feature too,
allowing it to use function graph tracer was needed. BPF also wants to
trace the return of many probes and its method doesn't scale either.
Having it use function graph tracer would improve that.
By allowing function graph tracer to have multiple users allows both
kretprobes and BPF to use function graph tracer in these cases. This will
allow kretprobes code to be removed in the future as it's version will no
longer be needed. Note, function graph tracer is only limited to 16
simultaneous users, due to shadow stack size and allocated slots.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZpbWlxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qgtvAP9jxmgEiEhz4Bpe1vRKVSMYK6ozXHTT
7MFKRMeQqQ8zeAEA2sD5Zrt9l7zKzg0DFpaDLgc3/yh14afIDxzTlIvkmQ8=
=umuf
-----END PGP SIGNATURE-----
Merge tag 'ftrace-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull ftrace updates from Steven Rostedt:
"Rewrite of function graph tracer to allow multiple users
Up until now, the function graph tracer could only have a single user
attached to it. If another user tried to attach to the function graph
tracer while one was already attached, it would fail. Allowing
function graph tracer to have more than one user has been asked for
since 2009, but it required a rewrite to the logic to pull it off so
it never happened. Until now!
There's three systems that trace the return of a function. That is
kretprobes, function graph tracer, and BPF. kretprobes and function
graph tracing both do it similarly. The difference is that kretprobes
uses a shadow stack per callback and function graph tracer creates a
shadow stack for all tasks. The function graph tracer method makes it
possible to trace the return of all functions. As kretprobes now needs
that feature too, allowing it to use function graph tracer was needed.
BPF also wants to trace the return of many probes and its method
doesn't scale either. Having it use function graph tracer would
improve that.
By allowing function graph tracer to have multiple users allows both
kretprobes and BPF to use function graph tracer in these cases. This
will allow kretprobes code to be removed in the future as it's version
will no longer be needed.
Note, function graph tracer is only limited to 16 simultaneous users,
due to shadow stack size and allocated slots"
* tag 'ftrace-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (49 commits)
fgraph: Use str_plural() in test_graph_storage_single()
function_graph: Add READ_ONCE() when accessing fgraph_array[]
ftrace: Add missing kerneldoc parameters to unregister_ftrace_direct()
function_graph: Everyone uses HAVE_FUNCTION_GRAPH_RET_ADDR_PTR, remove it
function_graph: Fix up ftrace_graph_ret_addr()
function_graph: Make fgraph_update_pid_func() a stub for !DYNAMIC_FTRACE
function_graph: Rename BYTE_NUMBER to CHAR_NUMBER in selftests
fgraph: Remove some unused functions
ftrace: Hide one more entry in stack trace when ftrace_pid is enabled
function_graph: Do not update pid func if CONFIG_DYNAMIC_FTRACE not enabled
function_graph: Make fgraph_do_direct static key static
ftrace: Fix prototypes for ftrace_startup/shutdown_subops()
ftrace: Assign RCU list variable with rcu_assign_ptr()
ftrace: Assign ftrace_list_end to ftrace_ops_list type cast to RCU
ftrace: Declare function_trace_op in header to quiet sparse warning
ftrace: Add comments to ftrace_hash_move() and friends
ftrace: Convert "inc" parameter to bool in ftrace_hash_rec_update_modify()
ftrace: Add comments to ftrace_hash_rec_disable/enable()
ftrace: Remove "filter_hash" parameter from __ftrace_hash_rec_update()
ftrace: Rename dup_hash() and comment it
...
- Set rtla/osnoise default threshold to 1us from 5us
The 5us default was missing noise that people cared about.
Changing it to 1us makes it work as expected.
- Restructure how sched_switch prev_comm and next_comm was being saved.
The prev_comm was being saved along with the other next fields, and the
next_comm was being saved along with the other prev fields. This is just
a cosmetic change.
- Have the allocation of pid_list use GFP_NOWAIT instead of GFP_KERNEL.
The allocation can happen in irq_work context, but luckily, the size
was by default so large, it was never triggered. But in case it ever is,
use the NOWAIT allocation in the interrupt context.
- Fix some kernel doc errors.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZpbRchQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qt9qAQCM/FNa1mRRlnCxMD+SrcGJmW4j/VvE
5c+QY5ezCYxGjwEA5tYwXttoZ1WHGRWCvuRSnkWidE1K0HpRyITo3BVzaQU=
=Sw4T
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
"Trivial updates for 6.11:
- Set rtla/osnoise default threshold to 1us from 5us
The 5us default was missing noise that people cared about. Changing
it to 1us makes it work as expected.
- Restructure how sched_switch prev_comm and next_comm was being saved
The prev_comm was being saved along with the other next fields, and
the next_comm was being saved along with the other prev fields.
This is just a cosmetic change.
- Have the allocation of pid_list use GFP_NOWAIT instead of GFP_KERNEL
The allocation can happen in irq_work context, but luckily, the
size was by default so large, it was never triggered. But in case
it ever is, use the NOWAIT allocation in the interrupt context.
- Fix some kernel doc errors"
* tag 'trace-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
trace/pid_list: Change gfp flags in pid_list_fill_irq()
tracing/sched: sched_switch: place prev_comm and next_comm in right order
rtla/osnoise: set the default threshold to 1us
tracing: Fix trace_pid_list_free() kernel-doc
- Remove duplicate included header file linux/bootconfig.h from
lib/bootconfig.c. This is a cleanup, no behavior change.
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmaWhj4bHG1hc2FtaS5o
aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8bdd0H/iraZ7ZOFWxCapOZI4dL
7f870j0PQG/KU7lB4jAo+3u7YyQWQTTLdhDPEOci4axsDG+56C/SVpHV0Z26SGHX
ZqcKlA/H0HT4BA3zG1leRzXC/qPYiAEdIw38NngYPYBUWhqM3qmYlrRIBeg89VrM
B4yaIJA/Uae7KAlB2dcmhmrIg86QK1iPKU6G+U5mIFecxDQmowE7z5f5pI/K/M5j
2HT2Kg1XPTtxOb15mKtA19TXbbA1IqYUvwW5jOffppKMwtiggEaOj4mLQ1MhlrP0
pEb1OJMx21MvEJYtjOXi8qsSGOhdWH8sBpxdUv21GzwRvOuG/AoaN1YKMIZCQp1K
Jjo=
=Bjzb
-----END PGP SIGNATURE-----
Merge tag 'bootconfig-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull bootconfig update from Masami Hiramatsu:
- Remove duplicate included header file linux/bootconfig.h from
lib/bootconfig.c. This is a cleanup, no behavior change.
* tag 'bootconfig-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
bootconfig: Remove duplicate included header file linux/bootconfig.h
Uprobes:
- x86/shstk: Make return uprobe work with shadow stack.
- Add uretprobe syscall which speeds up the uretprobe 10-30% faster. This
syscall is automatically used from user-space trampolines which are
generated by the uretprobe. If this syscall is used by normal
user program, it will cause SIGILL. Note that this is currently only
implemented on x86_64.
(This also has 2 fixes for adjusting the syscall number to avoid conflict
with new *attrat syscalls.)
- uprobes/perf: fix user stack traces in the presence of pending uretprobe.
This corrects the uretprobe's trampoline address in the stacktrace with
correct return address.
- selftests/x86: Add a return uprobe with shadow stack test.
- selftests/bpf: Add uretprobe syscall related tests.
. test case for register integrity check.
. test case with register changing case.
. test case for uretprobe syscall without uprobes (expected to be failed).
. test case for uretprobe with shadow stack.
- selftests/bpf: add test validating uprobe/uretprobe stack traces
- MAINTAINERS: Add uprobes entry. This does not specify the tree but to
clarify who maintains and reviews the uprobes.
Kprobes:
- tracing/kprobes: Test case cleanups. Replace redundant WARN_ON_ONCE() +
pr_warn() with WARN_ONCE() and remove unnecessary code from selftest.
- tracing/kprobes: Add symbol counting check when module loads. This
checks the uniqueness of the probed symbol on modules. The same check
has already done for kernel symbols.
(This also has a fix for build error with CONFIG_MODULES=n)
Cleanup:
- Add MODULE_DESCRIPTION() macros for fprobe and kprobe examples.
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmaWYxwbHG1hc2FtaS5o
aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8bsUgH/3JcSzDZujQWCZ1f4fJn
QecvTFSYcCl6ck8+/3wm4EsgeCXIFOyPnoPc7k2Gm+l6Dlk1DKGV6wV4tuKFUq9X
9mplcwoVA0Ln+EX9zv9v4s99yUGxcU9xjgC9XT7J52SvqYncPIi6dR0Z9wlJBmyd
Bx3cZk+wSzCYaoqYngI2fKlzsEcYgDIP999fQPRi0HGzNZujc4xeJyjCTC/48yWO
9kreRQq6wFdgRQTwMcR/fKPDKIGZQCU8jkXv5crVV5K3rNaBcwBmCJJMP8PzPU0V
UQ0+8RZK+Qk8SBwXcMNVRqm/efTderob4IYxP8OBe5wjAIE7+vu8r6sqwxRIS54M
Cyg=
=DRSr
-----END PGP SIGNATURE-----
Merge tag 'probes-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes updates from Masami Hiramatsu:
"Uprobes:
- x86/shstk: Make return uprobe work with shadow stack
- Add uretprobe syscall which speeds up the uretprobe 10-30% faster.
This syscall is automatically used from user-space trampolines
which are generated by the uretprobe. If this syscall is used by
normal user program, it will cause SIGILL. Note that this is
currently only implemented on x86_64.
(This also has two fixes for adjusting the syscall number to avoid
conflict with new *attrat syscalls.)
- uprobes/perf: fix user stack traces in the presence of pending
uretprobe. This corrects the uretprobe's trampoline address in the
stacktrace with correct return address
- selftests/x86: Add a return uprobe with shadow stack test
- selftests/bpf: Add uretprobe syscall related tests.
- test case for register integrity check
- test case with register changing case
- test case for uretprobe syscall without uprobes (expected to fail)
- test case for uretprobe with shadow stack
- selftests/bpf: add test validating uprobe/uretprobe stack traces
- MAINTAINERS: Add uprobes entry. This does not specify the tree but
to clarify who maintains and reviews the uprobes
Kprobes:
- tracing/kprobes: Test case cleanups.
Replace redundant WARN_ON_ONCE() + pr_warn() with WARN_ONCE() and
remove unnecessary code from selftest
- tracing/kprobes: Add symbol counting check when module loads.
This checks the uniqueness of the probed symbol on modules. The
same check has already done for kernel symbols
(This also has a fix for build error with CONFIG_MODULES=n)
Cleanup:
- Add MODULE_DESCRIPTION() macros for fprobe and kprobe examples"
* tag 'probes-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
MAINTAINERS: Add uprobes entry
selftests/bpf: Change uretprobe syscall number in uprobe_syscall test
uprobe: Change uretprobe syscall scope and number
tracing/kprobes: Fix build error when find_module() is not available
tracing/kprobes: Add symbol counting check when module loads
selftests/bpf: add test validating uprobe/uretprobe stack traces
perf,uprobes: fix user stack traces in the presence of pending uretprobes
tracing/kprobe: Remove cleanup code unrelated to selftest
tracing/kprobe: Integrate test warnings into WARN_ONCE
selftests/bpf: Add uretprobe shadow stack test
selftests/bpf: Add uretprobe syscall call from user space test
selftests/bpf: Add uretprobe syscall test for regs changes
selftests/bpf: Add uretprobe syscall test for regs integrity
selftests/x86: Add return uprobe shadow stack test
uprobe: Add uretprobe syscall to speed up return probe
uprobe: Wire up uretprobe system call
x86/shstk: Make return uprobe work with shadow stack
samples: kprobes: add missing MODULE_DESCRIPTION() macros
fprobe: add missing MODULE_DESCRIPTION() macro
Similarly to PCI where msi-map/msi-mask are used to compute the full RID
(aka DID in ITS speak), use the msi-parent as the discovery mechanism,
since there is no way a device can generally express its ID.
However, since switching to a per-device MSI domain model, the domain
passed to its_pmsi_prepare() is the wrong one, and points to the device's
instead of the ITS'. Bad.
Use the parent domain instead, which is the ITS domain.
Fixes: 80b63cc1cc146 ("irqchip/gic-v3-its: Switch platform MSI to MSI parent")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240718075804.2245733-1-maz@kernel.org
Since 6adb35ff43a16 ("irqchip/gic-v3-its: Provide MSI parent for
PCI/MSI[-X]"), the primary domain a PCI device allocates its interrupts
from is the one that is directly attached to the device itself.
By virtue of being a PCI device, it has no OF node.
This domain is (through more layer than it is worth describing)
passed to its_pci_msi_prepare(), which tries to compute the
full RID that is presented to the ITS by the device. This is ultimately
done by calling pci_msi_domain_get_msi_rid(), passing both the
domain and the PCI device as arguments.
The baked-in assumption is that either the domain that is passed
to pci_msi_domain_get_msi_rid() describes an interrupt controller
with either an OF node or an entry in an ACPI IORT table.
In this case, it is *neither*. This domain is does not represent
anything firmware-based, but just an allocation unit for the device.
As a result, it fails to provide the full RID (which requires inspecting
the msi-map/msi-mask properties in the DT), and stick to the BDF, which
isn't very useful.
Tragedy follows with a litany of devices that randomly die as they fail to
see any MSI (because the RID is wrong) or fail to get an allocation
(because they try to steal LPIs from their neighbour's pool).
This will happen on any system where a single ITS is shared by multiple
root ports and end-points with overlapping BDF numbers, and has the
topology described in the device-tree. Simpler DT topologies will luckily
work, and so will ACPI-based systems.
Solve it by pointing pci_msi_domain_get_msi_rid() at the *parent* domain,
which is the ITS, resulting in a correct mapping and a restored happiness
in my personal zoo.
Fixes: 6adb35ff43a16 ("irqchip/gic-v3-its: Provide MSI parent for PCI/MSI[-X]")
Reported-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20240717195937.2240400-1-maz@kernel.org
Now that the platform MSI hack is gone, nothing needs to know about struct
msi_device_data outside of the core code.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Shivamurthy Shastri <shivamurthy.shastri@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240623142236.003295177@linutronix.de
All related domains provide MSI parent functionality, so the fallback code
to the original platform MSI implementation is not longer required.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Shivamurthy Shastri <shivamurthy.shastri@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240623142235.881677325@linutronix.de
All platform MSI users and the PCI/MSI code handle per device MSI domains
when the irqdomain associated to the device provides MSI parent
functionality.
Remove the "global" platform domain related code and provide the MSI parent
functionality by filling in msi_parent_ops.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Shivamurthy Shastri <shivamurthy.shastri@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240623142235.820275215@linutronix.de
All platform MSI users and the PCI/MSI code handle per device MSI domains
when the irqdomain associated to the device provides MSI parent
functionality.
Remove the "global" platform domain related code and provide the MSI parent
functionality by filling in msi_parent_ops.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Shivamurthy Shastri <shivamurthy.shastri@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240623142235.759892514@linutronix.de
All platform MSI users and the PCI/MSI code handle per device MSI domains
when the irqdomain associated to the device provides MSI parent
functionality.
Remove the "global" platform domain related code and provide the MSI parent
functionality by filling in msi_parent_ops.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Shivamurthy Shastri <shivamurthy.shastri@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240623142235.699780279@linutronix.de
The core infrastructure has everything in place to switch ICU to per
device MSI domains and avoid the convoluted construct of the existing
platform-MSI layering violation.
The new infrastructure provides a wired interrupt specific interface in the
MSI core which converts the 'hardware interrupt number + trigger type'
allocation which is required for wired interrupts in the regular irqdomain
code to a normal MSI allocation.
The hardware interrupt number and the trigger type are stored in the MSI
descriptor device cookie by the core code so the ICU specific code can
retrieve them.
The new per device domain is only instantiated when the irqdomain which is
associated to the ICU device provides MSI parent functionality. Up to
that point it invokes the existing code. Once the parent is converted the
code for the current platform-MSI mechanism is removed.
The new domain shares the interrupt chip callbacks and the translation
function. The only new functionality aside of filling out the
msi_domain_templates is a domain specific set_desc() callback, which will go
away once all platform-MSI code has been converted.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Shivamurthy Shastri <shivamurthy.shastri@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240623142235.635015886@linutronix.de
All platform MSI users and the PCI/MSI code handle per device MSI domains
when the irqdomain associated to the device provides MSI parent
functionality.
Remove the "global" platform domain related code and provide the MSI parent
functionality by filling in msi_parent_ops.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Shivamurthy Shastri <shivamurthy.shastri@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240623142235.574932935@linutronix.de
All platform MSI users and the PCI/MSI code handle per device MSI domains
when the irqdomain associated to the device provides MSI parent
functionality.
Remove the "global" PCI/MSI and platform domain related code and provide
the MSI parent functionality by filling in msi_parent_ops.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Shivamurthy Shastri <shivamurthy.shastri@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240623142235.514419280@linutronix.de
The MBI chip creates two MSI domains:
- PCI/MSI
- Platform device domain
Both have the MBI domain as parent and differ slightly in the interrupt
chip callbacks and the platform device domain supports level type
signaling.
Convert it over to the MSI parent domain mechanism by:
- Providing the required templates
- Implementing a custom init_dev_msi_info() callback which sets the chip
callbacks and the level support flags depending on the domain bus token
type of the per device domain.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240623142235.455849114@linutronix.de
Now that ITS provides the MSI parent domain, remove the unused fallback
code.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Shivamurthy Shastri <shivamurthy.shastri@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240623142235.333333826@linutronix.de
Similar to the previous conversion of the PCI/MSI support lift the
prepare() callback from the existing platform MSI code and enable
platform MSI and the related device domain bus tokens in select
and the child domain initialization code.
All platform MSI users are automatically using the new per device MSI model
now.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Shivamurthy Shastri <shivamurthy.shastri@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240623142235.271734124@linutronix.de
Add the new bus token to the accepted list of child domain tokens.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Shivamurthy Shastri <shivamurthy.shastri@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240623142235.207343466@linutronix.de
The core infrastructure has everything in place to switch MBIGEN to per
device MSI domains and avoid the convoluted construct of the existing
platform-MSI layering violation.
The new infrastructure provides a wired interrupt specific interface in the
MSI core which converts the 'hardware interrupt number + trigger type'
allocation which is required for wired interrupts in the regular irqdomain
code to a normal MSI allocation.
The hardware interrupt number and the trigger type are stored in the MSI
descriptor device cookie by the core code so the MBIGEN specific code can
retrieve them.
The new per device domain is only instantiated when the irqdomain which is
associated to the MBIGEN device provides MSI parent functionality. Up to
that point it invokes the existing code. Once the parent is converted the
code for the current platform-MSI mechanism is removed.
The new domain shares the interrupt chip callbacks and the translation
function. The only new functionality aside of filling out the
msi_domain_template is a domain specific set_desc() callback, which will go
away once all platform-MSI code has been converted.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Shivamurthy Shastri <shivamurthy.shastri@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240623142235.146579575@linutronix.de
Add the prerequisites for DEVICE MSI into the shared select() and child
domain init function. These domains are really trivial and just provide a
custom irq chip callback to write the MSI message.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Shivamurthy Shastri <shivamurthy.shastri@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240623142235.085171290@linutronix.de
The its_pci_msi_prepare() function from the ITS-PCI/MSI code provides the
'global' PCI/MSI domains. Move this function to the ITS-MSI parent code and
amend the function to use the domain hardware size, which is the MSI[X]
vector count, for allocating the ITS slots for the PCI device.
Enable PCI matching in msi_parent_ops and provide the necessary update to
the ITS specific child domain initialization function so that the prepare
callback gets invoked on allocations.
The latter might be optimized to do the allocation right at the point where
the child domain is initialized, but keep it simple for now.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Shivamurthy Shastri <shivamurthy.shastri@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240623142235.024567623@linutronix.de
Add the bus tokens for DOMAIN_BUS_PCI_DEVICE_MSI and
DOMAIN_BUS_PCI_DEVICE_MSIX to the common child init
function.
Provide the match mask which can be used by parent domain
implementation so the bitmask based child bus token match
works.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Shivamurthy Shastri <shivamurthy.shastri@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240623142234.964056815@linutronix.de
To support per device MSI domains the ITS must provide MSI parent domain
functionality.
Provide the basic skeleton for this:
- msi_parent_ops
- child domain init callback
- the MSI parent flag set in irqdomain::flags
This does not make ITS a functional parent domain as there is no bit set in
the bus_select_mask yet, but it provides the base to implement PCI and
platform MSI support gradually on top.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Shivamurthy Shastri <shivamurthy.shastri@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240623142234.903076277@linutronix.de
All irqdomains which provide MSI parent domain functionality for per device
MSI domains need to provide a select() callback for the irqdomain and a
function to initialize the child domain.
Most of these functions would just be copy&paste with minimal
modifications, so provide a library function which implements the required
functionality and is customizable via parent_domain::msi_parent_ops. The
check for the supported bus tokens in msi_lib_init_dev_msi_info() is
expanded step by step within the next patches.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Shivamurthy Shastri <shivamurthy.shastri@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240623142234.840975799@linutronix.de
Most ARM(64) PCI/MSI domains mask and unmask in the parent domain after or
before the PCI mask/unmask operation takes place. So there are more than a
dozen of the same wrapper implementation all over the place.
Don't make the same mistake with the new per device PCI/MSI domains and
provide a new MSI feature flag, which lets the domain implementation
enable this sequence in the PCI/MSI code.
Signed-off-by: Shivamurthy Shastri <shivamurthy.shastri@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/87ed8j34pj.ffs@tglx
Commit 50b040ef3732 ("PCI/pwrctl: only call of_platform_populate() if
CONFIG_OF is enabled") added the CONFIG_OF guard for the
of_platform_populate() API. But it missed the fact that the CONFIG_OF
platforms can also run on ACPI without devicetree (so dev.of_node will
be NULL). In those cases, of_platform_populate() will fail with below
error messages as seen on the Ampere Altra box:
pci 000c:00:01.0: failed to populate child OF nodes (-22)
pci 000c:00:02.0: failed to populate child OF nodes (-22)
Fix this by checking for the existence of 'dev.of_node' before calling
the of_platform_populate() API. This also warrants the removal of
CONFIG_OF check, since dev_of_node() helper will return NULL if
CONFIG_OF is not enabled.
While at it, let's also use dev_of_node() to pass device OF node pointer
to of_platform_populate().
Fixes: 50b040ef3732 ("PCI/pwrctl: only call of_platform_populate() if CONFIG_OF is enabled")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Closes: https://lore.kernel.org/linux-arm-msm/CAHk-=wjcO_9dkNf-bNda6bzykb5ZXWtAYA97p7oDsXPHmMRi6g@mail.gmail.com
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Several versions of GCC mis-compile asm goto with outputs. We try to
workaround this, but our workaround is demonstrably incomplete and
liable to result in subtle bugs, especially on arm64 where get_user()
has recently been moved over to using asm goto with outputs.
From discussion(s) with Linus at:
https://lore.kernel.org/linux-arm-kernel/Zpfv2tnlQ-gOLGac@J2N7QTR9R3.cambridge.arm.com/https://lore.kernel.org/linux-arm-kernel/ZpfxLrJAOF2YNqCk@J2N7QTR9R3.cambridge.arm.com/
... it sounds like the best thing to do for now is to remove the
workaround and make CC_HAS_ASM_GOTO_OUTPUT depend on working compiler
versions.
The issue was originally reported to GCC by Sean Christopherson:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=113921
... and Jakub Jelinek fixed this for GCC 14, with the fix backported to
13.3.0, 12.4.0, and 11.5.0.
In the kernel, we tried to workaround broken compilers in commits:
4356e9f841f7 ("work around gcc bugs with 'asm goto' with outputs")
68fb3ca0e408 ("update workarounds for gcc "asm goto" issue")
... but the workaround of adding an empty asm("") after the asm volatile
goto(...) demonstrably does not always avoid the problem, as can be seen
in the following test case:
| #define asm_goto_output(x...) \
| do { asm volatile goto(x); asm (""); } while (0)
|
| #define __good_or_bad(__val, __key) \
| do { \
| __label__ __failed; \
| unsigned long __tmp; \
| asm_goto_output( \
| " cbnz %[key], %l[__failed]\n" \
| " mov %[val], #0x900d\n" \
| : [val] "=r" (__tmp) \
| : [key] "r" (__key) \
| : \
| : __failed); \
| (__val) = __tmp; \
| break; \
| __failed: \
| (__val) = 0xbad; \
| } while (0)
|
| unsigned long get_val(unsigned long key);
| unsigned long get_val(unsigned long key)
| {
| unsigned long val = 0xbad;
|
| __good_or_bad(val, key);
|
| return val;
| }
GCC 13.2.0 (at -O2) compiles this to:
| cbnz x0, .Lfailed
| mov x0, #0x900d
| .Lfailed:
| ret
GCC 14.1.0 (at -O2) compiles this to:
| cbnz x0, .Lfailed
| mov x0, #0x900d
| ret
| .Lfailed:
| mov x0, #0xbad
| ret
Note that GCC 13.2.0 erroneously omits the assignment to 'val' in the
error path (even though this does not depend on an output of the asm
goto). GCC 14.1.0 correctly retains the assignment.
This problem can be seen within the kernel with the following test case:
| #include <linux/uaccess.h>
| #include <linux/types.h>
|
| noinline unsigned long test_unsafe_get_user(unsigned long __user *ptr);
| noinline unsigned long test_unsafe_get_user(unsigned long __user *ptr)
| {
| unsigned long val;
|
| unsafe_get_user(val, ptr, Efault);
| return val;
|
| Efault:
| val = 0x900d;
| return val;
| }
GCC 13.2.0 (arm64 defconfig) compiles this to:
| and x0, x0, #0xff7fffffffffffff
| ldtr x0, [x0]
| .Lextable_fixup:
| ret
GCC 13.2.0 (x86_64 defconfig + MITIGATION_RETPOLINE=n) compiles this to:
| endbr64
| mov (%rdi),%rax
| .Lextable_fixup:
| ret
... omitting the assignment to 'val' in the error path, and leaving
garbage in the result register returned by the function (which happens
to contain the faulting address in the generated code).
GCC 14.1.0 (arm64 defconfig) compiles this to:
| and x0, x0, #0xff7fffffffffffff
| ldtr x0, [x0]
| ret
| .Lextable_fixup:
| mov x0, #0x900d // #36877
| ret
GCC 14.1.0 (x86_64 defconfig + MITIGATION_RETPOLINE=n) compiles this to:
| endbr64
| mov (%rdi),%rax
| ret
| .Lextable_fixup:
| mov $0x900d,%eax
| ret
... retaining the expected assignment to 'val' in the error path.
We don't have a complete and reasonable workaround. While placing empty
asm("") blocks after each goto label *might* be sufficient, we don't
know for certain, this is tedious and error-prone, and there doesn't
seem to be a neat way to wrap this up (which is especially painful for
cases with multiple goto labels).
Avoid this issue by disabling CONFIG_CC_HAS_ASM_GOTO_OUTPUT for
known-broken compiler versions and removing the workaround (along with
the CONFIG_GCC_ASM_GOTO_OUTPUT_WORKAROUND config option).
For the moment I've left the default implementation of asm_goto_output()
unchanged. This should now be redundant since any compiler with the fix
for the clobbering issue whould also have a fix for the (earlier)
volatile issue, but it's far less churny to leave it around, which makes
it easier to backport this patch if necessary.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Alex Coplan <alex.coplan@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Jakub Jelinek <jakub@gcc.gnu.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Szabolcs Nagy <szabolcs.nagy@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit fbb5c0606fa4 ("kbuild: add syscall table generation to
scripts/Makefile.asm-headers") started to generate syscall headers
for architectures using generic syscalls.
However, these headers are always rebuilt using GNU Make 4.4.1 or newer.
When using GNU Make 4.4 or older, these headers are not rebuilt when the
command to generate them is changed, despite the use of the if_changed
macro.
scripts/Makefile.asm-headers now uses FORCE, but it is not marked as
.PHONY. To handle the command line change correctly, .*.cmd files must
be included.
Fixes: fbb5c0606fa4 ("kbuild: add syscall table generation to scripts/Makefile.asm-headers")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Closes: https://lore.kernel.org/lkml/CAHk-=wibB7SvXnUftBgAt+4-3vEKRpvEgBeDEH=i=j2GvDitoA@mail.gmail.com/
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
core:
- deprecate DRM data and return 0 date
- connector: Create a set of helpers to help with HDMI support
- Remove driver owner assignments
- Allow more drivers to compile with COMPILE_TEST
- Conversions to drm_edid
- Sprinkle MODULE_DESCRIPTIONS everywhere they are missing
- Remove drm_mm_replace_node
- print: Add a drm prefix to warn level messages too, remove
___drm_dbg, consolidate prefix handling
- New monochrome TV mode variant
ttm:
- improve number of page faults on some platforms
- fix test builds under PREEMPT_RT
- more test coverage
ci:
- Require a more recent version of mesa,
- improve farm setup and test generation
dma-buf:
- warn if reserving 0 fence slots
- internal API heap enhancements
fbdev:
- Create memory manager optimized fbdev emulation
panic:
- Allow to select fonts,
- improve drm_fb_dma_get_scanout_buffer
- Allow to dump kmsg to the screen
bridge:
- Remove redundant checks on bridge->encoder
- Remove drm_bridge_chain_mode_fixup
- bridge-connector: Plumb in the new HDMI helper
- analogix_dp: Various improvements, handle AUX transfers timeout
- samsung-dsim: Fix timings calculation
- tc358767: Plenty of small fixes, fix no connector attach, fix clocks
- sii902x: state validation improvements
panels:
- Switch panels from register table initialization to proper code
- Now that the panel code tracks the panel state, remove every
ad-hoc implementation in the panel drivers
- More cleanup of prepare / enable state tracking in drivers
- edp: Drop legacy panel compatibles
- simple-bridge: Switch to devm_drm_bridge_add
- New panels: Lincoln Tech Sol LCD185-101CT, Microtips Technology
13-101HIEBCAF0-C, Microtips Technology MF-103HIEB0GA0, BOE
nv110wum-l60, IVO t109nw41, WL-355608-A8, PrimeView PM070WL4,
Lincoln Technologies LCD197, Ortustech COM35H3P70ULC,
AUO G104STN01, K&d kd101ne3-40ti
amdgpu:
- DCN 4.0.x support
- GC 12.0 support
- GMC 12.0 support
- SDMA 7.0 support
- MES12 support
- MMHUB 4.1 support
- GFX12 modifier and DCC support
- lots of IP fixes/updates
amdkfd:
- Contiguous VRAM allocations
- GC 12.0 support
- SDMA 7.0 support
- SR-IOV fixes
- KFD GFX ALU exceptions
i915:
- Battlemage Xe2 HPD display enablement
- Panel Replay enabling
- DP AUX-less ALPM/LOBF
- Enable link training failure fallback for DP MST links
- CMRR (Content Match Refresh Rate) enabling
- Increase ADL-S/ADL-P/DG2+ max TMDS bitrate to 6 Gbps
- Enable eDP AUX based HDR backlight
- Support replaying GPU hangs with captured context image
- Automate CCS Mode setting during engine resets
- lots of refactoring
- Support replaying GPU hangs with captured context image
- Increase FLR timeout from 3s to 9s
- Enable w/a 16021333562 for DG2, MTL and ARL [guc]
xe:
- update MAINATINERS
- New uapi adding OA functionality to Xe
- expose l3 bank mask
- fix display detect on ADL-N
- runtime PM Fixes
- Fix silent backmerge issues
- More prep for SR-IOV
- HWmon additions
- per client usage info
- Rework GPU page fault handling
- Drop EXEC_QUEUE_FLAG_BANNED
- Add BMG PCI IDs
- Scheduler fixes and improvements
- Rename xe_exec_queue::compute to xe_exec_queue::lr
- Use ttm_uncached for BO with NEEDS_UC flag
- Rename xe perf layer as xe observation layer
- lots of refactoring
radeon:
- Backlight workaround for iMac
- Silence UBSAN flex array warnings
msm:
- Validate registers XML description against schema in CI
- core/dpu: SM7150 support
- mdp5: Add support for MSM8937
- gpu: Add param for userspace to know if raytracing is supported
- gpu: X185 support (aka gpu in X1 laptop chips)
- gpu: a505 support
ivpu:
- hardware scheduler support
- profiling support
- improvements to the platform support layer
- firmware handling improvements
- clocks/power mgmt improvements
- scheduler/logging improvements
habanalabs:
- Gradual sleep in polling memory macro.
- Reduce Gaudi2 MSI-X interrupt count to 128.
- Add Gaudi2-D revision support.
- Add timestamp to CPLD info.
- Gaudi2: Assume hard-reset by firmware upon MC SEI severe error.
- Align Gaudi2 interrupt names.
- Check for errors after preboot is ready.
- Change habanalabs maintainer and git repo path.
mgag200:
- refactoring and improvements
- Add BMC output
- enable polling
nouveau:
- add registry command line
v3d:
- perf counters improvements
zynqmp:
- irq and debugfs improvements
atmel-hlcdc:
- Support XLCDC in sam9x7
mipi-dbi:
- Remove mipi_dbi_machine_little_endian
- make SPI bits per word configurable
- support RGB888
- allow pixel formats to be specified in the DT
sun4i:
- Rework the blender setup for DE2
panfrost:
- Enable MT8188 support
vc4:
- Monochrome TV support
exynos:
- fix fallback mode regression
- fix memory leak
- Use drm_edid_duplicate() instead of kmemdup()
etnaviv:
- fix i.MX8MP NPU clock gating
- workaround FE register cdc issues on some cores
- fix DMA sync handling for cached buffers
- fix job timeout handling
- keep TS enabled on MMUv2 cores for improved performance
mediatek:
- Convert to platform remove callback returning void-
- Drop chain_mode_fixup call in mode_valid()
- Fixes the errors of MediaTek display driver found by IGT.
- Add display support for the MT8365-EVK board
- Fix bit depth overwritten for mtk_ovl_set bit_depth()
- Fix possible_crtcs calculation
- Fix spurious kfree()
ast:
- refactor mode setting code
stm:
- Add LVDS support
- DSI PHY updates
-----BEGIN PGP SIGNATURE-----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=g+Ad
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2024-07-18' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"There's a lot of stuff in here, amd, i915 and xe have new platform
work, lots of core rework around EDID handling, some new COMPILE_TEST
options, maintainer changes and a lots of other stuff. Summary:
core:
- deprecate DRM data and return 0 date
- connector: Create a set of helpers to help with HDMI support
- Remove driver owner assignments
- Allow more drivers to compile with COMPILE_TEST
- Conversions to drm_edid
- Sprinkle MODULE_DESCRIPTIONS everywhere they are missing
- Remove drm_mm_replace_node
- print: Add a drm prefix to warn level messages too, remove
___drm_dbg, consolidate prefix handling
- New monochrome TV mode variant
ttm:
- improve number of page faults on some platforms
- fix test builds under PREEMPT_RT
- more test coverage
ci:
- Require a more recent version of mesa
- improve farm setup and test generation
dma-buf:
- warn if reserving 0 fence slots
- internal API heap enhancements
fbdev:
- Create memory manager optimized fbdev emulation
panic:
- Allow to select fonts
- improve drm_fb_dma_get_scanout_buffer
- Allow to dump kmsg to the screen
bridge:
- Remove redundant checks on bridge->encoder
- Remove drm_bridge_chain_mode_fixup
- bridge-connector: Plumb in the new HDMI helper
- analogix_dp: Various improvements, handle AUX transfers timeout
- samsung-dsim: Fix timings calculation
- tc358767: Plenty of small fixes, fix no connector attach, fix
clocks
- sii902x: state validation improvements
panels:
- Switch panels from register table initialization to proper code
- Now that the panel code tracks the panel state, remove every ad-hoc
implementation in the panel drivers
- More cleanup of prepare / enable state tracking in drivers
- edp: Drop legacy panel compatibles
- simple-bridge: Switch to devm_drm_bridge_add
- New panels: Lincoln Tech Sol LCD185-101CT, Microtips Technology
13-101HIEBCAF0-C, Microtips Technology MF-103HIEB0GA0,
BOE nv110wum-l60, IVO t109nw41, WL-355608-A8, PrimeView
PM070WL4, Lincoln Technologies LCD197, Ortustech
COM35H3P70ULC, AUO G104STN01, K&d kd101ne3-40ti
amdgpu:
- DCN 4.0.x support
- GC 12.0 support
- GMC 12.0 support
- SDMA 7.0 support
- MES12 support
- MMHUB 4.1 support
- GFX12 modifier and DCC support
- lots of IP fixes/updates
amdkfd:
- Contiguous VRAM allocations
- GC 12.0 support
- SDMA 7.0 support
- SR-IOV fixes
- KFD GFX ALU exceptions
i915:
- Battlemage Xe2 HPD display enablement
- Panel Replay enabling
- DP AUX-less ALPM/LOBF
- Enable link training failure fallback for DP MST links
- CMRR (Content Match Refresh Rate) enabling
- Increase ADL-S/ADL-P/DG2+ max TMDS bitrate to 6 Gbps
- Enable eDP AUX based HDR backlight
- Support replaying GPU hangs with captured context image
- Automate CCS Mode setting during engine resets
- lots of refactoring
- Support replaying GPU hangs with captured context image
- Increase FLR timeout from 3s to 9s
- Enable w/a 16021333562 for DG2, MTL and ARL [guc]
xe:
- update MAINATINERS
- New uapi adding OA functionality to Xe
- expose l3 bank mask
- fix display detect on ADL-N
- runtime PM Fixes
- Fix silent backmerge issues
- More prep for SR-IOV
- HWmon additions
- per client usage info
- Rework GPU page fault handling
- Drop EXEC_QUEUE_FLAG_BANNED
- Add BMG PCI IDs
- Scheduler fixes and improvements
- Rename xe_exec_queue::compute to xe_exec_queue::lr
- Use ttm_uncached for BO with NEEDS_UC flag
- Rename xe perf layer as xe observation layer
- lots of refactoring
radeon:
- Backlight workaround for iMac
- Silence UBSAN flex array warnings
msm:
- Validate registers XML description against schema in CI
- core/dpu: SM7150 support
- mdp5: Add support for MSM8937
- gpu: Add param for userspace to know if raytracing is supported
- gpu: X185 support (aka gpu in X1 laptop chips)
- gpu: a505 support
ivpu:
- hardware scheduler support
- profiling support
- improvements to the platform support layer
- firmware handling improvements
- clocks/power mgmt improvements
- scheduler/logging improvements
habanalabs:
- Gradual sleep in polling memory macro
- Reduce Gaudi2 MSI-X interrupt count to 128
- Add Gaudi2-D revision support
- Add timestamp to CPLD info
- Gaudi2: Assume hard-reset by firmware upon MC SEI severe error
- Align Gaudi2 interrupt names
- Check for errors after preboot is ready
- Change habanalabs maintainer and git repo path
mgag200:
- refactoring and improvements
- Add BMC output
- enable polling
nouveau:
- add registry command line
v3d:
- perf counters improvements
zynqmp:
- irq and debugfs improvements
atmel-hlcdc:
- Support XLCDC in sam9x7
mipi-dbi:
- Remove mipi_dbi_machine_little_endian
- make SPI bits per word configurable
- support RGB888
- allow pixel formats to be specified in the DT
sun4i:
- Rework the blender setup for DE2
panfrost:
- Enable MT8188 support
vc4:
- Monochrome TV support
exynos:
- fix fallback mode regression
- fix memory leak
- Use drm_edid_duplicate() instead of kmemdup()
etnaviv:
- fix i.MX8MP NPU clock gating
- workaround FE register cdc issues on some cores
- fix DMA sync handling for cached buffers
- fix job timeout handling
- keep TS enabled on MMUv2 cores for improved performance
mediatek:
- Convert to platform remove callback returning void-
- Drop chain_mode_fixup call in mode_valid()
- Fixes the errors of MediaTek display driver found by IGT
- Add display support for the MT8365-EVK board
- Fix bit depth overwritten for mtk_ovl_set bit_depth()
- Fix possible_crtcs calculation
- Fix spurious kfree()
ast:
- refactor mode setting code
stm:
- Add LVDS support
- DSI PHY updates"
* tag 'drm-next-2024-07-18' of https://gitlab.freedesktop.org/drm/kernel: (2501 commits)
drm/amdgpu/mes12: add missing opcode string
drm/amdgpu/mes11: update opcode strings
Revert "drm/amd/display: Reset freesync config before update new state"
drm/omap: Restrict compile testing to PAGE_SIZE less than 64KB
drm/xe: Drop trace_xe_hw_fence_free
drm/xe/uapi: Rename xe perf layer as xe observation layer
drm/amdgpu: remove exp hw support check for gfx12
drm/amdgpu: timely save bad pages to eeprom after gpu ras reset is completed
drm/amdgpu: flush all cached ras bad pages to eeprom
drm/amdgpu: select compute ME engines dynamically
drm/amd/display: Allow display DCC for DCN401
drm/amdgpu: select compute ME engines dynamically
drm/amdgpu/job: Replace DRM_INFO/ERROR logging
drm/amdgpu: select compute ME engines dynamically
drm/amd/pm: Ignore initial value in smu response register
drm/amdgpu: Initialize VF partition mode
drm/amd/amdgpu: fix SDMA IRQ client ID <-> req mapping
MAINTAINERS: fix Xinhui's name
MAINTAINERS: update powerplay and swsmu
drm/qxl: Pin buffer objects for internal mappings
...
The GSS routine errors are values, not flags.
Fixes: 0c77668ddb4e ("SUNRPC: Introduce trace points in rpc_auth_gss.ko")
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
We've observed NFS clients with sync tasks sleeping in __rpc_execute
waiting on RPC_TASK_QUEUED that have not responded to a wake-up from
rpc_make_runnable(). I suspect this problem usually goes unnoticed,
because on a busy client the task will eventually be re-awoken by another
task completion or xprt event. However, if the state manager is draining
the slot table, a sync task missing a wake-up can result in a hung client.
We've been able to prove that the waker in rpc_make_runnable() successfully
calls wake_up_bit() (ie- there's no race to tk_runstate), but the
wake_up_bit() call fails to wake the waiter. I suspect the waker is
missing the load of the bit's wait_queue_head, so waitqueue_active() is
false. There are some very helpful comments about this problem above
wake_up_bit(), prepare_to_wait(), and waitqueue_active().
Fix this by inserting smp_mb__after_atomic() before the wake_up_bit(),
which pairs with prepare_to_wait() calling set_current_state().
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Currently for the PCM and mixer tests we report test names which identify
the card being tested with the card number. This ensures we have unique
names but since card numbers are dynamically assigned at runtime the names
we end up with will often not be stable on systems with multiple cards
especially where those cards are provided by separate modules loeaded at
runtime. This makes it difficult for automated systems and UIs to relate
test results between runs on affected platforms.
Address this by replacing our use of card numbers with card names which are
more likely to be stable across runs. We use the card ID since it is
guaranteed to be unique by default, unlike the long name. There is still
some vulnerability to ordering issues if multiple cards with the same base
ID are present in the system but have separate dependencies but not all
drivers put distinguishing information in their long names.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/20240716-alsa-kselftest-board-name-v2-1-60f1acdde096@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Samsung Galaxy Book Pro 360 (13" 2022 NT935QDB-KC71S) with codec SSID
144d:c1a4 requires the same workaround to enable the speaker amp
as other Samsung models with the ALC298 codec.
Signed-off-by: Seunghun Han <kkamagui@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240718080908.8677-1-kkamagui@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Kconfig will ask the user twice about power sequencing: once for the QCom
WCN power sequencing driver and then again for the PCI power control
driver using it.
Let's automate the selection of PCI_PWRCTL by introducing a new hidden
symbol: HAVE_PWRCTL which should be selected by all platforms that have
the need to include PCI power control code (right now: only ARCH_QCOM).
The pwrseq-based PCI pwrctl driver itself will then be selected by the
drivers binding to devices that may require external handling of the
power-up sequence (currently: ath11k and ath12k) based on the value
of HAVE_PWRCTL.
Make all PCI pwrctl Kconfig symbols hidden so that no questions are
asked during configuration.
Fixes: 4565d2652a37 ("PCI/pwrctl: Add PCI power control core code")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Closes: https://lore.kernel.org/lkml/CAHk-=wjWc5dzcj2O1tEgNHY1rnQW63JwtuZi_vAZPqy6wqpoUQ@mail.gmail.com/
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> # drivers/net/wireless/ath
Link: https://lore.kernel.org/r/20240717142803.53248-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The iwlwifi wireless driver registers a thermal zone that is only needed
when the network interface handled by it is up and it wants that thermal
zone to be effectively ignored by the core otherwise.
Before commit a8a261774466 ("thermal: core: Call monitor_thermal_zone()
if zone temperature is invalid") that could be achieved by returning
an error code from the thermal zone's .get_temp() callback because the
core did not really handle errors returned by it almost at all.
However, commit a8a261774466 made the core attempt to recover from the
situation in which the temperature of a thermal zone cannot be
determined due to errors returned by its .get_temp() and is always
invalid from the core's perspective.
That was done because there are thermal zones in which .get_temp()
returns errors to start with due to some difficulties related to the
initialization ordering, but then it will start to produce valid
temperature values at one point.
Unfortunately, the simple approach taken by commit a8a261774466,
which is to poll the thermal zone periodically until its .get_temp()
callback starts to return valid temperature values, is at odds with
the special thermal zone in iwlwifi in which .get_temp() may always
return an error because its network interface may always be down. If
that happens, every attempt to invoke the thermal zone's .get_temp()
callback resulting in an error causes the thermal core to print a
dev_warn() message to the kernel log which is super-noisy.
To address this problem, make the core handle the case in which
.get_temp() returns 0, but the temperature value returned by it
is not actually valid, in a special way. Namely, make the core
completely ignore the invalid temperature value coming from
.get_temp() in that case, which requires folding in
update_temperature() into its caller and a few related changes.
On the iwlwifi side, modify iwl_mvm_tzone_get_temp() to return 0
and put THERMAL_TEMP_INVALID into the temperature return memory
location instead of returning an error when the firmware is not
running or it is not of the right type.
Also, to clearly separate the handling of invalid temperature
values from the thermal zone initialization, introduce a special
THERMAL_TEMP_INIT value specifically for the latter purpose.
Fixes: a8a261774466 ("thermal: core: Call monitor_thermal_zone() if zone temperature is invalid")
Closes: https://lore.kernel.org/linux-pm/20240715044527.GA1544@sol.localdomain/
Reported-by: Eric Biggers <ebiggers@kernel.org>
Reported-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=201761
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
Cc: 6.10+ <stable@vger.kernel.org> # 6.10+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/4950004.31r3eYUQgx@rjwysocki.net
[ rjw: Rebased on top of the current mainline ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Kent Overstreet
Tavian Barnes
Linus Torvalds
Marc Zyngier
Thomas Gleixner
Shivamurthy Shastri
Manivannan Sadhasivam
Mark Rutland
Masahiro Yamada
Benjamin Coddington
Mark Brown
Seunghun Han
Bartosz Golaszewski
Rafael J. Wysocki