IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
VxLAN offloading is not functional if the NIC is running in multichannel
mode (UMC, FLEX-10, VNIC...). Enabling this additionally kills whole
connectivity through the NIC and the device needs to be down and up to
restore it. The firmware should take care about it and does not allow
the conversion of interface to tunnel type (be_cmd_manage_iface) or should
support VxLAN offloading if multichannel config is enabled.
I have tested this on the latest available firmware (10.6.144.21).
Result:
[root@sm-04 ~]# ip link set enp5s0f0 up[root@sm-04 ~]# ip addr add 172.30.10.50/24 dev enp5s0f0
[root@sm-04 ~]# ping -c 3 172.30.10.254PING 172.30.10.254 (172.30.10.254) 56(84) bytes of data.
64 bytes from 172.30.10.254: icmp_seq=1 ttl=64 time=0.317 ms
64 bytes from 172.30.10.254: icmp_seq=2 ttl=64 time=0.187 ms
64 bytes from 172.30.10.254: icmp_seq=3 ttl=64 time=0.188 ms
--- 172.30.10.254 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2000ms
rtt min/avg/max/mdev = 0.187/0.230/0.317/0.063 ms
[root@sm-04 ~]# ip link add link enp5s0f0 vxlan10 type vxlan id 10 remote 172.30.10.60 dstport 4789
[root@sm-04 ~]# ip link set vxlan10 up
[ 7900.442811] be2net 0000:05:00.0: Enabled VxLAN offloads for UDP port 4789
[ 7900.455722] be2net 0000:05:00.1: Enabled VxLAN offloads for UDP port 4789
[ 7900.468635] be2net 0000:05:00.2: Enabled VxLAN offloads for UDP port 4789
[ 7900.481553] be2net 0000:05:00.3: Enabled VxLAN offloads for UDP port 4789
[root@sm-04 ~]# ping -c 3 172.30.10.254
PING 172.30.10.254 (172.30.10.254) 56(84) bytes of data.
--- 172.30.10.254 ping statistics ---
3 packets transmitted, 0 received, 100% packet loss, time 1999ms
[root@sm-04 ~]# ip link set vxlan10 down
[ 7959.434093] be2net 0000:05:00.0: Disabled VxLAN offloads for UDP port 4789
[ 7959.444792] be2net 0000:05:00.1: Disabled VxLAN offloads for UDP port 4789
[ 7959.455592] be2net 0000:05:00.2: Disabled VxLAN offloads for UDP port 4789
[ 7959.466416] be2net 0000:05:00.3: Disabled VxLAN offloads for UDP port 4789
[root@sm-04 ~]# ip link del vxlan10
[root@sm-04 ~]# ping -c 3 172.30.10.254
PING 172.30.10.254 (172.30.10.254) 56(84) bytes of data.
--- 172.30.10.254 ping statistics ---
3 packets transmitted, 0 received, 100% packet loss, time 1999ms
[root@sm-04 ~]# ip link set enp5s0f0 down
[root@sm-04 ~]# ip link set enp5s0f0 up
[ 8071.019003] be2net 0000:05:00.0 enp5s0f0: Link is Up
[root@sm-04 ~]# ping -c 3 172.30.10.254
PING 172.30.10.254 (172.30.10.254) 56(84) bytes of data.
64 bytes from 172.30.10.254: icmp_seq=1 ttl=64 time=0.318 ms
64 bytes from 172.30.10.254: icmp_seq=2 ttl=64 time=0.196 ms
64 bytes from 172.30.10.254: icmp_seq=3 ttl=64 time=0.194 ms
--- 172.30.10.254 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2000ms
rtt min/avg/max/mdev = 0.194/0.236/0.318/0.057 ms
Cc: Sathya Perla <sathya.perla@avagotech.com>
Cc: Ajit Khaparde <ajit.khaparde@avagotech.com>
Cc: Padmanabh Ratnakar <padmanabh.ratnakar@avagotech.com>
Cc: Sriharsha Basavapatna <sriharsha.basavapatna@avagotech.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Acked-by: Ajit Khaparde <ajit.khaparde@avagotech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Martin KaFai Lau says:
====================
ipv6: Fix a potential deadlock when creating pcpu rt
v1 -> v2:
A minor change in the commit message of patch 2.
This patch series fixes a potential deadlock when creating a pcpu rt.
It happens when dst_alloc() decided to run gc. Something like this:
read_lock(&table->tb6_lock);
ip6_rt_pcpu_alloc()
=> dst_alloc()
=> ip6_dst_gc()
=> write_lock(&table->tb6_lock); /* oops */
Patch 1 and 2 are some prep works.
Patch 3 is the fix.
Original report: https://bugzilla.kernel.org/show_bug.cgi?id=102291
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
It is a prep work for fixing a potential deadlock when creating
a pcpu rt.
The current rt6_get_pcpu_route() will also create a pcpu rt if one does not
exist. This patch moves the pcpu rt creation logic into another function,
rt6_make_pcpu_route().
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
CC: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
After 4b32b5ad31 ("ipv6: Stop rt6_info from using inet_peer's metrics"),
ip6_dst_alloc() does not need the 'table' argument. This patch
cleans it up.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
CC: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
* Due to HW bug, LAN8700 sometimes does not detect presence of energy in the
Ethernet cable in Energy Detect Power-Down mode (e.g while EDPWRDOWN bit is
set, the ENERGYON bit does not asserted sometimes). This is a common bug of
LAN87xx family of PHY chips.
* The lan87xx_read_status() was improved to acquire ENERGYON bit. Its previous
algorythm still not reliable on 100 % and sometimes skip cable plugging.
Signed-off-by: Igor Plyatov <plyatov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iQIcBAABCAAGBQJVzc58AAoJEDBSmw7B7bqrhkQP/1bgnJHOtAthUygVCUDN3p6J
rbmyfmszcWqPgYWMh4sfBRJQPWBpq4Q4ZPlVNCU8VkFoJRXemqWsOjnpMro0Vi8Y
omTMPf1ph5WAUhCTjR6d+J7M5uHVzp1ougeaDEHY6QPTQ0rNTQ4W9gR+TFRSSTG2
gVIuledUXQgkBW6nm3mT3bxSwMkK6PnPy6Dpkzm4VFt3JtO0ZpSV+RzMLifmNf1r
25lYiUUyimWbJGvZCMV9O2qKWwb+9AIYrItW74yUV2dRqqBZmP+IqJQ2p2mTWcjE
YBToZA5Yrd6iSfuKC/wd2kt3NkmsGdNGwFSy4tI6WjBkKKLygOKBvcpBzcNDgv06
ZB4mcyfac+KPiDA1QFvwV+OrU1u63wWDyfjkGCVkoq6WJkUxUZ4JVOq/7LolrxK8
d0mJojOMjTlr2Q+7KMINl9HDw0MhkYqY/fJv+AHOlcIGc2bVrJF0n9fWsc9gKdPu
c+2lIJLxzuojapXJXj+XpF6iPjh92F83W6iPbXZfu6AzvYQwGwve87CckurwElYY
bCDV0nXzmn5DYwEOuKtiflbmLW0qlXbjhX27B4yHmXsS3/Q7M/pMUy3mj4pchmxn
Iwr8pVoCgn8Z1hDJvyYPb4l0ERjY/MZghBJg+Yp4Q7CEWGOmyIPdi0visA9FN/xk
ekOYrjW9Jz3AlgMDPVCC
=uehl
-----END PGP SIGNATURE-----
Merge tag 'mac80211-for-davem-2015-08-14' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
We have a single bugfix for an invalid memory read.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The dma_mapping_error() function returns true or false. We should
return -ENOMEM if it there is a dma mapping error.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
PPP devices may get automatically unregistered when their network
namespace is getting removed. This happens if the ppp control plane
daemon (e.g. pppd) exits while it is the last user of this namespace.
This leads to several races:
* ppp_exit_net() may destroy the per namespace idr (pn->units_idr)
before all file descriptors were released. Successive ppp_release()
calls may then cleanup PPP devices with ppp_shutdown_interface() and
try to use the already destroyed idr.
* Automatic device unregistration may also happen before the
ppp_release() call for that device gets executed. Once called on
the file owning the device, ppp_release() will then clean it up and
try to unregister it a second time.
To fix these issues, operations defined in ppp_shutdown_interface() are
moved to the PPP device's ndo_uninit() callback. This allows PPP
devices to be properly cleaned up by unregister_netdev() and friends.
So checking for ppp->owner is now an accurate test to decide if a PPP
device should be unregistered.
Setting ppp->owner is done in ppp_create_interface(), before device
registration, in order to avoid unprotected modification of this field.
Finally, ppp_exit_net() now starts by unregistering all remaining PPP
devices to ensure that none will get unregistered after the call to
idr_destroy().
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, if phy state is PHY_RUNNING, we always register a CHANGE
when phy works in polling or interrupt ignored, this will make the
adjust_link being called even the phy link did Not changed.
checking the phy link to make sure the link did changed before we
register a CHANGE, if link did not changed, we do nothing.
Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 8133534c76 ("net: limit tcp/udp rmem/wmem to
SOCK_{RCV,SND}BUF_MIN") modified four sysctls to enforce that the values
written to them are not less than SOCK_MIN_{RCV,SND}BUF.
That change causes 4096 to no longer be accepted as a valid value for
'min' in tcp_wmem and udp_wmem_min. 4096 has been the default for both
of those sysctls for a long time, and unfortunately seems to be an
extremely popular setting. This change breaks a large number of sysctl
configurations at Facebook.
That commit referred to b1cb59cf2e ("net: sysctl_net_core: check
SNDBUF and RCVBUF for min length"), which choose to use the SOCK_MIN
constants as the lower limits to avoid nasty bugs. But AFAICS, a limit
of SOCK_MIN_SNDBUF isn't necessary to do that: the BUG_ON cited in the
commit message seems to have happened because unix_stream_sendmsg()
expects a minimum of a full page (ie SK_MEM_QUANTUM) and the math broke,
not because it had less than SOCK_MIN_SNDBUF allocated.
This particular issue doesn't seem to affect TCP however: using a
setting of "1 1 1" for tcp_{r,w}mem works, although it's obviously
suboptimal. SK_MEM_QUANTUM would be a nice minimum, but it's 64K on
some archs, so there would still be breakage.
Since a value of one doesn't seem to cause any problems, we can drop the
minimum 8133534c added to fix this.
This reverts commit 8133534c76.
Fixes: 8133534c76 ("net: limit tcp/udp rmem/wmem to SOCK_MIN...")
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Sorin Dumitru <sorin@returnze.ro>
Signed-off-by: Calvin Owens <calvinowens@fb.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When replacing del_timer() with del_timer_sync(), I introduced
a deadlock condition :
reqsk_queue_unlink() is called from inet_csk_reqsk_queue_drop()
inet_csk_reqsk_queue_drop() can be called from many contexts,
one being the timer handler itself (reqsk_timer_handler()).
In this case, del_timer_sync() loops forever.
Simple fix is to test if timer is pending.
Fixes: 2235f2ac75 ("inet: fix races with reqsk timers")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are some MAC registers that need to be kept in sync
with the link state parameters, see adjust_link().
However, after a MAC soft reset default values for
these registers are assumed. In some cases (excepting
if down/ if up for example) adjust_link() does not see
that these values were reset to default because the
priv->old* link parameters were left unchanged.
So, reset the priv->old* link params as well during a
MAC reset to let adjust_link() restore the MAC link
settings to the actual link state values.
Fixes following case, for example:
Setting link to 100M, changing MTU (implies MAC reset),
link state remains unchanged to 100M but MAC registers
were reset to default (1G) breaking the connectivity w/
the PHY. Closing and re-opening the interface would
restore the MAC link parameters to the correct values.
Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When generating /proc/net/route we emit a header followed by a line for
each route. When a short read is performed we will restart this process
based on the open file descriptor. When calculating the start point we
fail to take into account that the 0th entry is the header. This leads
us to skip the first entry when doing a continuation read.
This can be easily seen with the comparison below:
while read l; do echo "$l"; done </proc/net/route >A
cat /proc/net/route >B
diff -bu A B | grep '^[+-]'
On my example machine I have approximatly 10KB of route output. There we
see the very first non-title element is lost in the while read case,
and an entry around the 8K mark in the cat case:
+wlan0 00000000 02021EAC 0003 0 0 400 00000000 0 0 0
-tun1 00C0AC0A 00000000 0001 0 0 950 00C0FFFF 0 0 0
Fix up the off-by-one when reaquiring position on continuation.
Fixes: 8be33e955c ("fib_trie: Fib walk rcu should take a tnode and key instead of a trie and a leaf")
BugLink: http://bugs.launchpad.net/bugs/1483440
Acked-by: Alexander Duyck <alexander.h.duyck@redhat.com>
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The recent refactoring of the IGMP and MLD parsing code into
ipv6_mc_check_mld() / ip_mc_check_igmp() introduced a potential crash /
BUG() invocation for bridges:
I wrongly assumed that skb_get() could be used as a simple reference
counter for an skb which is not the case. skb_get() bears additional
semantics, a user count. This leads to a BUG() invocation in
pskb_expand_head() / kernel panic if pskb_may_pull() is called on an skb
with a user count greater than one - unfortunately the refactoring did
just that.
Fixing this by removing the skb_get() call and changing the API: The
caller of ipv6_mc_check_mld() / ip_mc_check_igmp() now needs to
additionally check whether the returned skb_trimmed is a clone.
Fixes: 9afd85c9e4 ("net: Export IGMP/MLD message validation code")
Reported-by: Brenden Blanco <bblanco@plumgrid.com>
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
metadata snapshots aren't widely used but help provide a consistent
view of the metadata associated with an active thin-pool.
- a dm-cache fix for the 4.2 "default" policy switch from "mq" to "smq"
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVzPl/AAoJEMUj8QotnQNa2MUH/24BKs8WYNy79B9pr6H41ouQ
LAXFVfx3Vy7n3U1KrZcPylXb7R0feXphUrSXJ6ZlKz/Df+AhG5ycUOCfSZxSDpA9
pX5rtWFSWLXGF3wRf0GXqB3CXkrMKlNWVAUlzge39TpIzpdkbh9reM9He4yQphl9
u0QVvIOTQsUrtN9htnQb7Dgmm7qD6NinrebOrWTiOqBdCh3Iw4J48RsYggYOG0ZP
fbMnpZlH537vgLyKaz72Xh+kMrYmP5DBd1f+iAUBVKk12HQVQNMzEwOgkEB0M+4l
EG3c4O3zMVrBxXdxsI2srFZfLX2XeUYAuMx8cfVSSCDEzQwjC0kmXVdkCYuAjAk=
=r/53
-----END PGP SIGNATURE-----
Merge tag 'dm-4.2-fixes-5' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- two stable fixes for corruption seen in a snapshot of thinp metadata;
metadata snapshots aren't widely used but help provide a consistent
view of the metadata associated with an active thin-pool.
- a dm-cache fix for the 4.2 "default" policy switch from "mq" to "smq"
* tag 'dm-4.2-fixes-5' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm cache policy smq: move 'dm-cache-default' module alias to SMQ
dm btree: add ref counting ops for the leaves of top level btrees
dm thin metadata: delete btrees when releasing metadata snapshot
Pull xen block driver fixes from Jens Axboe:
"A few small bug fixes for xen-blk{front,back} that have been sitting
over my vacation"
* 'for-linus' of git://git.kernel.dk/linux-block:
xen-blkback: replace work_pending with work_busy in purge_persistent_gnt()
xen-blkfront: don't add indirect pages to list when !feature_persistent
xen-blkfront: introduce blkfront_gather_backend_features()
- Revert a fix from 4.2-rc5 that was causing lots of WARNING spam.
- Fix a memory leak affecting backends in HVM guests.
- Fix PV domU hang with certain configurations.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVzHsAAAoJEFxbo/MsZsTR9Y0H/2j1PHt29RPcNdgGQ84AH0Wh
tw1emL8rMcdhWQnsO7bNmywNNvRNQnU3ZJ8dzoq+5GPikNsbfQzYc7U2pIL4A+gB
AAJsNDNzecuq4srk8vNxcmZ7ySvm9w6dccDUex2ge3sNWaq6gzSQvz6FSWiL0Sxg
k3JcnemEg6JrYOTWdxKInAORMcRO6rgx9eIsdPUPOpgC5XLg6/mZOqBAWXIksDvs
V9uCMqQicaUgBgKFIOSllqH6fcCNooRu3aDwNNj/2mMcJmEvMeBkHmNlQgEm2j5L
ubdDyrC5y48TUPJm8i3+W2/AY+kgWzhThcqyVy6LRAAj5RItJFxMf0nMXzIEqlQ=
=UgMy
-----END PGP SIGNATURE-----
Merge tag 'for-linus-4.2-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen bug fixes from David Vrabel:
- revert a fix from 4.2-rc5 that was causing lots of WARNING spam.
- fix a memory leak affecting backends in HVM guests.
- fix PV domU hang with certain configurations.
* tag 'for-linus-4.2-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/xenbus: Don't leak memory when unmapping the ring on HVM backend
Revert "xen/events/fifo: Handle linked events when closing a port"
x86/xen: build "Xen PV" APIC driver for domU as well
This reverts commits 9a036b93a3 ("x86/signal/64: Remove 'fs' and 'gs'
from sigcontext") and c6f2062935 ("x86/signal/64: Fix SS handling for
signals delivered to 64-bit programs").
They were cleanups, but they break dosemu by changing the signal return
behavior (and removing 'fs' and 'gs' from the sigcontext struct - while
not actually changing any behavior - causes build problems).
Reported-and-tested-by: Stas Sergeev <stsp@list.ru>
Acked-by: Andy Lutomirski <luto@amacapital.net>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull networking fixes from David Miller:
1) Workaround hw bug when acquiring PCI bos ownership of iwlwifi
devices, from Emmanuel Grumbach.
2) Falling back to vmalloc in conntrack should not emit a warning, from
Pablo Neira Ayuso.
3) Fix NULL deref when rtlwifi driver is used as an AP, from Luis
Felipe Dominguez Vega.
4) Rocker doesn't free netdev on device removal, from Ido Schimmel.
5) UDP multicast early sock demux has route handling races, from Eric
Dumazet.
6) Fix L4 checksum handling in openvswitch, from Glenn Griffin.
7) Fix use-after-free in skb_set_peeked, from Herbert Xu.
8) Don't advertize NETIF_F_FRAGLIST in virtio_net driver, this can lead
to fraglists longer than the driver can support. From Jason Wang.
9) Fix mlx5 on non-4k-pagesize systems, from Carol L Soto.
10) Fix interrupt storm in bna driver, from Ivan Vecera.
11) Don't propagate -EBUSY from netlink_insert(), from Daniel Borkmann.
12) Fix inet request sock leak, from Eric Dumazet.
13) Fix TX interrupt masking and marking in TX descriptors of fs_enet
driver, from LEROY Christophe.
14) Get rid of rule optimizer in gianfar driver, it's buggy and unlikely
to get fixed any time soon. From Jakub Kicinski
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (61 commits)
cosa: missing error code on failure in probe()
gianfar: remove faulty filer optimizer
gianfar: correct list membership accounting
gianfar: correct filer table writing
bonding: Gratuitous ARP gets dropped when first slave added
net: dsa: Do not override PHY interface if already configured
net: fs_enet: mask interrupts for TX partial frames.
net: fs_enet: explicitly remove I flag on TX partial frames
inet: fix possible request socket leak
inet: fix races with reqsk timers
mkiss: Fix error handling in mkiss_open()
bnx2x: Free NVRAM lock at end of each page
bnx2x: Prevent null pointer dereference on SKB release
cxgb4: missing curly braces in t4_setup_debugfs()
net-timestamp: Update skb_complete_tx_timestamp comment
ipv6: don't reject link-local nexthop on other interface
netlink: make sure -EBUSY won't escape from netlink_insert
bna: fix interrupts storm caused by erroneous packets
net: mvpp2: replace TX coalescing interrupts with hrtimer
net: mvpp2: enable proper per-CPU TX buffers unmapping
...
missed during the conversion a couple of years ago.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=AM3b
-----END PGP SIGNATURE-----
Merge tag 'edac_fix_for_4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp
Pull EDAC fix from Borislav Petkov:
"A ppc4xx_edac fix for accessing ->csrows properly. This driver was
missed during the conversion a couple of years ago"
* tag 'edac_fix_for_4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
EDAC, ppc4xx: Access mci->csrows array elements properly
At the last iteration of the loop, j may equal zero and thus
tp_list[j - 1] causes an invalid read.
Change the logic of the loop so that j - 1 is always >= 0.
Cc: stable@vger.kernel.org
Signed-off-by: Adrien Schildknecht <adrien+dev@schischi.me>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The commit
de3910eb79 ("edac: change the mem allocation scheme to
make Documentation/kobject.txt happy")
changed the memory allocation for the csrows member. But ppc4xx_edac was
forgotten in the patch. Fix it.
Signed-off-by: Michael Walle <michael@walle.cc>
Cc: <stable@vger.kernel.org>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Link: http://lkml.kernel.org/r/1437469253-8611-1-git-send-email-michael@walle.cc
Signed-off-by: Borislav Petkov <bp@suse.de>
If register_hdlc_device() fails, the current code returns 0 but we
should return an error code instead.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski says:
====================
gianfar: filer changes
respinning with examples as requested.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Current filer rule optimization is broken in several ways:
(1) Can perform reads/writes beyond end of allocated tables.
(gianfar_ethtool.c:1326).
(2) It breaks badly for rules with more than 2 specifiers
(e.g. matching ip, port, tos).
Example:
# ethtool -N eth2 flow-type udp4 dst-ip 10.0.0.1 dst-port 1 tos 1 action 1
Added rule with ID 254
# ethtool -N eth2 flow-type udp4 dst-ip 10.0.0.2 dst-port 2 tos 2 action 9
Added rule with ID 253
# ethtool -N eth2 flow-type udp4 dst-ip 10.0.0.3 dst-port 3 tos 3 action 17
Added rule with ID 252
# ./filer_decode /sys/kernel/debug/gfar1/filer_raw
00: MASK == 00000210 AND Q:00 ctrl:00000080 prop:00000210
01: FPR == 00000210 AND CLE Q:00 ctrl:00000281 prop:00000210
02: MASK == ffffffff AND Q:00 ctrl:00000080 prop:ffffffff
03: DPT == 00000003 AND Q:00 ctrl:0000008e prop:00000003
04: TOS == 00000003 AND Q:00 ctrl:0000008a prop:00000003
05: DIA == 0a000003 AND Q:11 ctrl:0000448c prop:0a000003
06: DPT == 00000002 AND Q:00 ctrl:0000008e prop:00000002
07: TOS == 00000002 AND Q:00 ctrl:0000008a prop:00000002
08: DIA == 0a000002 AND Q:09 ctrl:0000248c prop:0a000002
09: DIA == 0a000001 AND Q:00 ctrl:0000008c prop:0a000001
0a: DPT == 00000001 AND Q:00 ctrl:0000008e prop:00000001
0b: TOS == 00000001 CLE Q:01 ctrl:0000060a prop:00000001
ff: MASK >= 00000000 Q:00 ctrl:00000020 prop:00000000
(Entire cluster gets AND-ed together).
(3) We observed that the masking rules it generates do not
play well with clustering on P2020. Only first rule
of the cluster would ever fire. Given that optimizer
relies heavily on masking this is very hard to fix.
Example:
# ethtool -N eth2 flow-type udp4 dst-ip 10.0.0.1 dst-port 1 action 1
Added rule with ID 254
# ethtool -N eth2 flow-type udp4 dst-ip 10.0.0.2 dst-port 2 action 9
Added rule with ID 253
# ethtool -N eth2 flow-type udp4 dst-ip 10.0.0.3 dst-port 3 action 17
Added rule with ID 252
# ./filer_decode /sys/kernel/debug/gfar1/filer_raw
00: MASK == 00000210 AND Q:00 ctrl:00000080 prop:00000210
01: FPR == 00000210 AND CLE Q:00 ctrl:00000281 prop:00000210
02: MASK == ffffffff AND Q:00 ctrl:00000080 prop:ffffffff
03: DPT == 00000003 AND Q:00 ctrl:0000008e prop:00000003
04: DIA == 0a000003 Q:11 ctrl:0000440c prop:0a000003
05: DPT == 00000002 AND Q:00 ctrl:0000008e prop:00000002
06: DIA == 0a000002 Q:09 ctrl:0000240c prop:0a000002
07: DIA == 0a000001 AND Q:00 ctrl:0000008c prop:0a000001
08: DPT == 00000001 CLE Q:01 ctrl:0000060e prop:00000001
ff: MASK >= 00000000 Q:00 ctrl:00000020 prop:00000000
Which looks correct according to the spec but only the first
(eth id 252)/last added rule for 10.0.0.3 will ever trigger.
As if filer did not treat the AND CLE as cluster start but
also kept AND-ing the rules. We found no errata covering this.
The fact that nobody noticed (2) or (3) makes me think
that this feature is not very widely used and we should just
remove it.
Reported-by: Aleksander Dutkowski <adutkowski@gmail.com>
Signed-off-by: Jakub Kicinski <kubakici@wp.pl>
Acked-by: Claudiu Manoil <claudiu.manoil@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
At a cost of one line let's make sure .count is correct
when calling gfar_process_filer_changes().
Signed-off-by: Jakub Kicinski <kubakici@wp.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
MAX_FILER_IDX is the last usable index. Using less-than
will already guarantee that one entry for catch-all rule
will be left, no need to subtract 1 here.
Signed-off-by: Jakub Kicinski <kubakici@wp.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the first slave is added (such as during bootup) the first
gratuitous ARP gets dropped. We don't see this drop during a failover.
The packet gets dropped in qdisc (noop_enqueue).
The fix is to delay the sending of gratuitous ARPs till the bond dev's
carrier is present.
It can also be worked around by setting num_grat_arp to more than 1.
Signed-off-by: Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In case we need to divert reads/writes using the slave MII bus, we may have
already fetched a valid PHY interface property from Device Tree, and that
mode is used by the PHY driver to make configuration decisions.
If we could not fetch the "phy-mode" property, we will assign p->phy_interface
to PHY_INTERFACE_MODE_NA, such that we can actually check for that condition as
to whether or not we should override the interface value.
Fixes: 19334920ea ("net: dsa: Set valid phy interface type")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull amd drm fixes from Alex Deucher:
"Dave is on vacation at the moment, so please pull these radeon and
amdgpu fixes directly.
Just a few minor things for 4.2:
- add a new radeon pci id
- fix a power management regression in amdgpu
- fix HEVC command buffer validation in amdgpu"
* 'drm-fixes-4.2' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon: add new OLAND pci id
Revert "drm/amdgpu: Configure doorbell to maximum slots"
drm/amdgpu: add context buffer size check for HEVC
When expanding a cache block we use krealloc() to resize the register
present bitmap without initialising the newly allocated data (the
original code was written for kzalloc()). Add an appropraite memset()
to fix that.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVyztsAAoJECTWi3JdVIfQ8QIH/RGXFhPUPWdXhi4JYn8+bIGb
6SSBzsxGlCocWBrzyaZRcz/WB7Na7t+oXoYEjk8CA+/8zPLRoCXHKmIETmQW0+7G
hUY+YNk8xxUtPuReeGgqZ7z9l9mC2f0UVPvgWn6dELamxtqr0LmODdKp5D3vLQLp
c2eFqZr3wjYwC9vuWElaUftyQzSYaj6Rr6PnZ6bD/pN/YY3zd53gt7QluT9SzUxs
5uZXhd1UD6GTDxCrtfqemlEaOYpQOdMO0h/3Eko4MbdCeq3bOq6kn9a+E7nfvE4v
dIeEdafqVABgKHi66B83Fu/5eJI+kI+qo9u2QuWLB9AWAJnZuiZc968eIDaKMBE=
=GTVe
-----END PGP SIGNATURE-----
Merge tag 'regmap-fix-v4.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fix from Mark Brown:
"regmap: Fix handling of present bits on rbtree cache block resize
When expanding a cache block we use krealloc() to resize the register
present bitmap without initialising the newly allocated data (the
original code was written for kzalloc()). Add an appropraite memset()
to fix that"
* tag 'regmap-fix-v4.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: regcache-rbtree: Clean new present bits on present bitmap resize
When creating dm-cache with the default policy, it will call
request_module("dm-cache-default") to register the default policy.
But the "dm-cache-default" alias was left referring to the MQ policy.
Fix this by moving the module alias to SMQ.
Fixes: bccab6a0 (dm cache: switch the "default" cache replacement policy from mq to smq)
Signed-off-by: Yi Zhang <yizhan@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
When using nested btrees, the top leaves of the top levels contain
block addresses for the root of the next tree down. If we shadow a
shared leaf node the leaf values (sub tree roots) should be incremented
accordingly.
This is only an issue if there is metadata sharing in the top levels.
Which only occurs if metadata snapshots are being used (as is possible
with dm-thinp). And could result in a block from the thinp metadata
snap being reused early, thus corrupting the thinp metadata snap.
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org
The device details and mapping trees were just being decremented
before. Now btree_del() is called to do a deep delete.
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org
by make localmodconfig even though their configs were set and the module
was loaded and visible by lsmod. The reason for this was because
streamline-config.pl only looks at Makefiles, and not Kbuild files. As
these modules use Kbuild for their names, they too need to be checked
by localmodconfig. This was fixed by Richard Weinberger.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVymvhAAoJEEjnJuOKh9ldSM4IAJlSMMqJ3cfYFBBpEPXc6cKw
1hSgbX3FF8BDk/YKskBYm3qmFPTNZT/lLA/lG5w5Yt2Nf3jWKgVou/j1f0sboigl
9fkoXgUXBRi8myubWHLAqvsNCxCLjTTjXRV+AWxTiPaGh6vnKX7393WFdvlLKhQz
CVLRzbPfvVqSH+R1oxAeapmQ8TA3A7IPW5v1HtkrnWXqJOt1A1/4UnZ+Es/jgd7L
1Syvf26C3kseWcqeUXIrvOBa4AgDS4kR8pdZJpvvSWbQRgebgEMH6gEk5jyI4JVd
6RpoTUSgVwhFof6cblvlNs9ROZYCUJLzlxgiDD2tOYIwtrtc23QgY8a+WEE2eG8=
=4S3x
-----END PGP SIGNATURE-----
Merge tag 'localmodconfig-v4.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-kconfig
Pull localmodconfig fix from Steven Rostedt:
"Leonidas Spyropoulos found that modules like nouveau were being
unselected by make localmodconfig even though their configs were set
and the module was loaded and visible by lsmod.
The reason for this was because streamline-config.pl only looks at
Makefiles, and not Kbuild files. As these modules use Kbuild for
their names, they too need to be checked by localmodconfig. This was
fixed by Richard Weinberger"
* tag 'localmodconfig-v4.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-kconfig:
localmodconfig: Use Kbuild files too
In kbuild it is allowed to define objects in files named "Makefile"
and "Kbuild".
Currently localmodconfig reads objects only from "Makefile"s and misses
modules like nouveau.
Link: http://lkml.kernel.org/r/1437948415-16290-1-git-send-email-richard@nod.at
Cc: stable@vger.kernel.org
Reported-and-tested-by: Leonidas Spyropoulos <artafinde@gmail.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Johan Hedberg says:
====================
pull request: bluetooth 2015-08-11
Here's an important regression fix for the 4.2-rc series that ensures
user space isn't given invalid LTK values. The bug essentially prevents
the encryption of subsequent LE connections, i.e. makes it impossible to
pair devices over LE.
Let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
We are not interested in interrupts for partially transmitted frames.
Unlike SCC and FCC, the FEC doesn't handle the I bit in buffer
descriptors, instead it defines two interrupt bits, TXB and TXF.
We have to mask TXB in order to only get interrupts once the
frame is fully transmitted.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
We are not interested in interrupts for partially transmitted frames,
we have to clear BD_ENET_TX_INTR explicitly otherwise it may remain
from a previously used descriptor.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
* Fix display regression on Versatile boards
* Fix OF node refcount bugs on omapdss
* fix WARN about clock prepare on pxa3xx_gcu
* Fix mem leak in videomode helpers
* Fix fbconsole related boot problem on sun7i-a20-olinuxino-micro
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=PAKL
-----END PGP SIGNATURE-----
Merge tag 'fbdev-fixes-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux
Pull fbdev fixes from Tomi Valkeinen:
- fix display regression on Versatile boards
- fix OF node refcount bugs on omapdss
- fix WARN about clock prepare on pxa3xx_gcu
- fix mem leak in videomode helpers
- fix fbconsole related boot problem on sun7i-a20-olinuxino-micro
* tag 'fbdev-fixes-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux:
fbcon: unconditionally initialize cursor blink interval
video: Fix possible leak in of_get_videomode()
video: fbdev: pxa3xx_gcu: prepare the clocks
OMAPDSS: Fix omap_dss_find_output_by_port_node() port refcount decrement
OMAPDSS: Fix node refcount leak in omapdss_of_get_next_port()
fbdev: select versatile helpers for the integrator
The commit ccc9d90a9a "xenbus_client:
Extend interface to support multi-page ring" removes the call to
free_xenballooned_pages() in xenbus_unmap_ring_vfree_hvm(), leaking a
page for every shared ring.
Only with backends running in HVM domains were affected.
Signed-off-by: Julien Grall <julien.grall@citrix.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
This reverts commit fcdf31a7c1.
This was causing a WARNING whenever a PIRQ was closed since
shutdown_pirq() is called with irqs disabled.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Cc: <stable@vger.kernel.org>
In commit b357a364c5 ("inet: fix possible panic in
reqsk_queue_unlink()"), I missed fact that tcp_check_req()
can return the listener socket in one case, and that we must
release the request socket refcount or we leak it.
Tested:
Following packetdrill test template shows the issue
0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
+0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
+0 bind(3, ..., ...) = 0
+0 listen(3, 1) = 0
+0 < S 0:0(0) win 2920 <mss 1460,sackOK,nop,nop>
+0 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK>
+.002 < . 1:1(0) ack 21 win 2920
+0 > R 21:21(0)
Fixes: b357a364c5 ("inet: fix possible panic in reqsk_queue_unlink()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
reqsk_queue_destroy() and reqsk_queue_unlink() should use
del_timer_sync() instead of del_timer() before calling reqsk_put(),
otherwise we could free a req still used by another cpu.
But before doing so, reqsk_queue_destroy() must release syn_wait_lock
spinlock or risk a dead lock, as reqsk_timer_handler() might
need to take this same spinlock from reqsk_queue_unlink() (called from
inet_csk_reqsk_queue_drop())
Fixes: fa76ce7328 ("inet: get rid of central tcp/dccp listener timer")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
