IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
All usage of this function was removed three years ago, and the
function was marked as deprecated:
a52ad514fd ("net: deprecate eth_change_mtu, remove usage")
So I think we can remove it now.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lorenzo Bianconi says:
====================
XDP fixes for socionext driver
Fix possible user-after-in XDP rx path
Fix rx statistics accounting if no bpf program is attached
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix xdp_result initialization in netsec_process_rx in order to not
increase rx counters if there is no bpf program attached to the xdp hook
and napi_gro_receive returns GRO_DROP
Fixes: ba2b232108 ("net: netsec: add XDP support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix possible use-after-free in in netsec_process_rx that can occurs if
the first packet is sent to the normal networking stack and the
following one is dropped by the bpf program attached to the xdp hook.
Fix the issue defining the skb pointer in the 'budget' loop
Fixes: ba2b232108 ("net: netsec: add XDP support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko says:
====================
net: allow per-net notifier to follow netdev into namespace
Currently we have per-net notifier, which allows to get only
notifications relevant to particular network namespace. That is enough
for drivers that have netdevs local in a particular namespace (cannot
move elsewhere).
However if netdev can change namespace, per-net notifier cannot be used.
Introduce dev_net variant that is basically per-net notifier with an
extension that re-registers the per-net notifier upon netdev namespace
change. Basically the per-net notifier follows the netdev into
namespace.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Register the dev_net notifier and allow the per-net notifier to follow
the device into different namespace.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce dev_net variants of netdev notifier register/unregister functions
and allow per-net notifier to follow the netdevice into the namespace it is
moved to.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Push the code which is done under rtnl lock in net notifier register and
unregister function into separate helpers.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The function does the same thing as the existing code, so rather call
call_netdevice_unregister_net_notifiers() instead of code duplication.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
reuseport_grow() does not need to initialize the more_reuse->max_socks
again. It is already initialized in __reuseport_alloc().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
Steffen Klassert says:
====================
Support fraglist GRO/GSO
This patchset adds support to do GRO/GSO by chaining packets
of the same flow at the SKB frag_list pointer. This avoids
the overhead to merge payloads into one big packet, and
on the other end, if GSO is needed it avoids the overhead
of splitting the big packet back to the native form.
Patch 1 adds netdev feature flags to enable fraglist GRO,
this implements one of the configuration options discussed
at netconf 2019.
Patch 2 adds a netdev software feature set that defaults to off
and assigns the new fraglist GRO feature flag to it.
Patch 3 adds the core infrastructure to do fraglist GRO/GSO.
Patch 4 enables UDP to use fraglist GRO/GSO if configured.
I have only meaningful forwarding performance measurements.
I did some tests for the local receive path with netperf and iperf,
but in this case the sender that generates the packets is the
bottleneck. So the benchmarks are not that meaningful for the
receive path.
Paolo Abeni did some benchmarks of the local receive path for the
RFC v2 version of this pachset, results can be found here:
https://www.spinics.net/lists/netdev/msg551158.html
I used my IPsec forwarding test setup for the performance measurements:
------------ ------------
-->| router 1 |-------->| router 2 |--
| ------------ ------------ |
| |
| -------------------- |
--------|Spirent Testcenter|<----------
--------------------
net-next (September 7th 2019):
Single stream UDP frame size 1460 Bytes: 1.161.000 fps (13.5 Gbps).
----------------------------------------------------------------------
net-next (September 7th 2019) + standard UDP GRO/GSO (not implemented
in this patchset):
Single stream UDP frame size 1460 Bytes: 1.801.000 fps (21 Gbps).
----------------------------------------------------------------------
net-next (September 7th 2019) + fraglist UDP GRO/GSO:
Single stream UDP frame size 1460 Bytes: 2.860.000 fps (33.4 Gbps).
=======================================================================
net-next (January 23th 2020):
Single stream UDP frame size 1460 Bytes: 919.000 fps (10.73 Gbps).
----------------------------------------------------------------------
net-next (January 23th 2020) + fraglist UDP GRO/GSO:
Single stream UDP frame size 1460 Bytes: 2.430.000 fps (28.38 Gbps).
-----------------------------------------------------------------------
Changes from RFC v1:
- Add IPv6 support.
- Split patchset to enable UDP GRO by default before adding
fraglist GRO support.
- Mark fraglist GRO packets as CHECKSUM_NONE.
- Take a refcount on the first segment skb when doing fraglist
segmentation. With this we can use the same error handling
path as with standard segmentation.
Changes from RFC v2:
- Add a netdev feature flag to configure listifyed GRO.
- Fix UDP GRO enabling for IPv6.
- Fix a rcu_read_lock() imbalance.
- Fix error path in skb_segment_list().
Changes from RFC v3:
- Rename NETIF_F_GRO_LIST to NETIF_F_GRO_FRAGLIST and add
NETIF_F_GSO_FRAGLIST.
- Move introduction of SKB_GSO_FRAGLIST to patch 2.
- Use udpv6_encap_needed_key instead of udp_encap_needed_key in IPv6.
- Move some missplaced code from patch 5 to patch 1 where it belongs to.
Changes from RFC v4:
- Drop the 'UDP: enable GRO by default' patch for now. Standard UDP GRO
is not changed with this patchset.
- Rebase to net-next current.
Changes fom v1 (December 18th):
- Do a full __copy_skb_header instead of tryng to find the really
needed subset header fields. Thisa can be done later.
- Mark all fraglist GRO packets with CHECKSUM_UNNECESSARY.
- Rebase to net-next current.
Changes fom v2 (January 24th):
- Do the CHECKSUM_UNNECESSARY setting from IPv4 for IPv6 too.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch extends UDP GRO to support fraglist GRO/GSO
by using the previously introduced infrastructure.
If the feature is enabled, all UDP packets are going to
fraglist GRO (local input and forward).
After validating the csum, we mark ip_summed as
CHECKSUM_UNNECESSARY for fraglist GRO packets to
make sure that the csum is not touched.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds the core functions to chain/unchain
GSO skbs at the frag_list pointer. This also adds
a new GSO type SKB_GSO_FRAGLIST and a is_flist
flag to napi_gro_cb which indicates that this
flow will be GROed by fraglist chaining.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The previous patch added the NETIF_F_GRO_FRAGLIST feature.
This is a software feature that should default to off.
Current software features default to on, so add a new
feature set that defaults to off.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds new Fraglist GRO/GSO feature flags. They will be used
to configure fraglist GRO/GSO what will be implemented with some
followup paches.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Recently XDP Support was added to the mvneta driver
for software buffer management only.
It is still possible to attach an XDP program if
hardware buffer management is used.
It is not doing anything at that point.
The patch disallows attaching XDP programs to mvneta
if hardware buffer management is used.
I am sorry about that. It is my first submission and I am having
some troubles with the format of my emails.
v4 -> v5:
- Remove extra tabs
v3 -> v4:
- Please ignore v3 I accidentally submitted
my other patch with git-send-mail and v4 is correct
v2 -> v3:
- My mailserver corrupted the patch
resubmission with git-send-email
v1 -> v2:
- Fixing the patches indentation
Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
The subpacket scanning loop in rxrpc_receive_data() references the
subpacket count in the private data part of the sk_buff in the loop
termination condition. However, when the final subpacket is pasted into
the ring buffer, the function is no longer has a ref on the sk_buff and
should not be looking at sp->* any more. This point is actually marked in
the code when skb is cleared (but sp is not - which is an error).
Fix this by caching sp->nr_subpackets in a local variable and using that
instead.
Also clear 'sp' to catch accesses after that point.
This can show up as an oops in rxrpc_get_skb() if sp->nr_subpackets gets
trashed by the sk_buff getting freed and reused in the meantime.
Fixes: e2de6c4048 ("rxrpc: Use info in skbuff instead of reparsing a jumbo packet")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Include the size of struct nhmsg size when calculating
how much of a payload to allocate in a new netlink nexthop
notification message.
Without this, we will fail to fill the skbuff at certain nexthop
group sizes.
You can reproduce the failure with the following iproute2 commands:
ip link add dummy1 type dummy
ip link add dummy2 type dummy
ip link add dummy3 type dummy
ip link add dummy4 type dummy
ip link add dummy5 type dummy
ip link add dummy6 type dummy
ip link add dummy7 type dummy
ip link add dummy8 type dummy
ip link add dummy9 type dummy
ip link add dummy10 type dummy
ip link add dummy11 type dummy
ip link add dummy12 type dummy
ip link add dummy13 type dummy
ip link add dummy14 type dummy
ip link add dummy15 type dummy
ip link add dummy16 type dummy
ip link add dummy17 type dummy
ip link add dummy18 type dummy
ip link add dummy19 type dummy
ip ro add 1.1.1.1/32 dev dummy1
ip ro add 1.1.1.2/32 dev dummy2
ip ro add 1.1.1.3/32 dev dummy3
ip ro add 1.1.1.4/32 dev dummy4
ip ro add 1.1.1.5/32 dev dummy5
ip ro add 1.1.1.6/32 dev dummy6
ip ro add 1.1.1.7/32 dev dummy7
ip ro add 1.1.1.8/32 dev dummy8
ip ro add 1.1.1.9/32 dev dummy9
ip ro add 1.1.1.10/32 dev dummy10
ip ro add 1.1.1.11/32 dev dummy11
ip ro add 1.1.1.12/32 dev dummy12
ip ro add 1.1.1.13/32 dev dummy13
ip ro add 1.1.1.14/32 dev dummy14
ip ro add 1.1.1.15/32 dev dummy15
ip ro add 1.1.1.16/32 dev dummy16
ip ro add 1.1.1.17/32 dev dummy17
ip ro add 1.1.1.18/32 dev dummy18
ip ro add 1.1.1.19/32 dev dummy19
ip next add id 1 via 1.1.1.1 dev dummy1
ip next add id 2 via 1.1.1.2 dev dummy2
ip next add id 3 via 1.1.1.3 dev dummy3
ip next add id 4 via 1.1.1.4 dev dummy4
ip next add id 5 via 1.1.1.5 dev dummy5
ip next add id 6 via 1.1.1.6 dev dummy6
ip next add id 7 via 1.1.1.7 dev dummy7
ip next add id 8 via 1.1.1.8 dev dummy8
ip next add id 9 via 1.1.1.9 dev dummy9
ip next add id 10 via 1.1.1.10 dev dummy10
ip next add id 11 via 1.1.1.11 dev dummy11
ip next add id 12 via 1.1.1.12 dev dummy12
ip next add id 13 via 1.1.1.13 dev dummy13
ip next add id 14 via 1.1.1.14 dev dummy14
ip next add id 15 via 1.1.1.15 dev dummy15
ip next add id 16 via 1.1.1.16 dev dummy16
ip next add id 17 via 1.1.1.17 dev dummy17
ip next add id 18 via 1.1.1.18 dev dummy18
ip next add id 19 via 1.1.1.19 dev dummy19
ip next add id 1111 group 1/2/3/4/5/6/7/8/9/10/11/12/13/14/15/16/17/18/19
ip next del id 1111
Fixes: 430a049190 ("nexthop: Add support for nexthop groups")
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In a complex TC class hierarchy like this:
tc qdisc add dev eth0 root handle 1:0 cbq bandwidth 100Mbit \
avpkt 1000 cell 8
tc class add dev eth0 parent 1:0 classid 1:1 cbq bandwidth 100Mbit \
rate 6Mbit weight 0.6Mbit prio 8 allot 1514 cell 8 maxburst 20 \
avpkt 1000 bounded
tc filter add dev eth0 parent 1:0 protocol ip prio 1 u32 match ip \
sport 80 0xffff flowid 1:3
tc filter add dev eth0 parent 1:0 protocol ip prio 1 u32 match ip \
sport 25 0xffff flowid 1:4
tc class add dev eth0 parent 1:1 classid 1:3 cbq bandwidth 100Mbit \
rate 5Mbit weight 0.5Mbit prio 5 allot 1514 cell 8 maxburst 20 \
avpkt 1000
tc class add dev eth0 parent 1:1 classid 1:4 cbq bandwidth 100Mbit \
rate 3Mbit weight 0.3Mbit prio 5 allot 1514 cell 8 maxburst 20 \
avpkt 1000
where filters are installed on qdisc 1:0, so we can't merely
search from class 1:1 when creating class 1:3 and class 1:4. We have
to walk through all the child classes of the direct parent qdisc.
Otherwise we would miss filters those need reverse binding.
Fixes: 07d79fc7d9 ("net_sched: add reverse binding for tc class")
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current implementations of ops->bind_class() are merely
searching for classid and updating class in the struct tcf_result,
without invoking either of cl_ops->bind_tcf() or
cl_ops->unbind_tcf(). This breaks the design of them as qdisc's
like cbq use them to count filters too. This is why syzbot triggered
the warning in cbq_destroy_class().
In order to fix this, we have to call cl_ops->bind_tcf() and
cl_ops->unbind_tcf() like the filter binding path. This patch does
so by refactoring out two helper functions __tcf_bind_filter()
and __tcf_unbind_filter(), which are lockless and accept a Qdisc
pointer, then teaching each implementation to call them correctly.
Note, we merely pass the Qdisc pointer as an opaque pointer to
each filter, they only need to pass it down to the helper
functions without understanding it at all.
Fixes: 07d79fc7d9 ("net_sched: add reverse binding for tc class")
Reported-and-tested-by: syzbot+0a0596220218fcb603a8@syzkaller.appspotmail.com
Reported-and-tested-by: syzbot+63bdb6006961d8c917c6@syzkaller.appspotmail.com
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
This batch contains Netfilter updates for net-next:
1) Add nft_setelem_parse_key() helper function.
2) Add NFTA_SET_ELEM_KEY_END to specify a range with one single element.
3) Add NFTA_SET_DESC_CONCAT to describe the set element concatenation,
from Stefano Brivio.
4) Add bitmap_cut() to copy n-bits from source to destination,
from Stefano Brivio.
5) Add set to match on arbitrary concatenations, from Stefano Brivio.
6) Add selftest for this new set type. An extract of Stefano's
description follows:
"Existing nftables set implementations allow matching entries with
interval expressions (rbtree), e.g. 192.0.2.1-192.0.2.4, entries
specifying field concatenation (hash, rhash), e.g. 192.0.2.1:22,
but not both.
In other words, none of the set types allows matching on range
expressions for more than one packet field at a time, such as ipset
does with types bitmap:ip,mac, and, to a more limited extent
(netmasks, not arbitrary ranges), with types hash:net,net,
hash:net,port, hash:ip,port,net, and hash:net,port,net.
As a pure hash-based approach is unsuitable for matching on ranges,
and "proxying" the existing red-black tree type looks impractical as
elements would need to be shared and managed across all employed
trees, this new set implementation intends to fill the functionality
gap by employing a relatively novel approach.
The fundamental idea, illustrated in deeper detail in patch 5/9, is to
use lookup tables classifying a small number of grouped bits from each
field, and map the lookup results in a way that yields a verdict for
the full set of specified fields.
The grouping bit aspect is loosely inspired by the Grouper algorithm,
by Jay Ligatti, Josh Kuhn, and Chris Gage (see patch 5/9 for the full
reference).
A reference, stand-alone implementation of the algorithm itself is
available at:
https://pipapo.lameexcu.se
Some notes about possible future optimisations are also mentioned
there. This algorithm reduces the matching problem to, essentially,
a repetitive sequence of simple bitwise operations, and is
particularly suitable to be optimised by leveraging SIMD instruction
sets."
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This test covers functionality and stability of the newly added
nftables set implementation supporting concatenation of ranged
fields.
For some selected set expression types, test:
- correctness, by checking that packets match or don't
- concurrency, by attempting races between insertion, deletion, lookup
- timeout feature, checking that packets don't match expired entries
and (roughly) estimate matching rates, comparing to baselines for
simple drop on netdev ingress hook and for hash and rbtrees sets.
In order to send packets, this needs one of sendip, netcat or bash.
To flood with traffic, iperf3, iperf and netperf are supported. For
performance measurements, this relies on the sample pktgen script
pktgen_bench_xmit_mode_netif_receive.sh.
If none of the tools suitable for a given test are available, specific
tests will be skipped.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This new set type allows for intervals in concatenated fields,
which are expressed in the usual way, that is, simple byte
concatenation with padding to 32 bits for single fields, and
given as ranges by specifying start and end elements containing,
each, the full concatenation of start and end values for the
single fields.
Ranges are expanded to composing netmasks, for each field: these
are inserted as rules in per-field lookup tables. Bits to be
classified are divided in 4-bit groups, and for each group, the
lookup table contains 4^2 buckets, representing all the possible
values of a bit group. This approach was inspired by the Grouper
algorithm:
http://www.cse.usf.edu/~ligatti/projects/grouper/
Matching is performed by a sequence of AND operations between
bucket values, with buckets selected according to the value of
packet bits, for each group. The result of this sequence tells
us which rules matched for a given field.
In order to concatenate several ranged fields, per-field rules
are mapped using mapping arrays, one per field, that specify
which rules should be considered while matching the next field.
The mapping array for the last field contains a reference to
the element originally inserted.
The notes in nft_set_pipapo.c cover the algorithm in deeper
detail.
A pure hash-based approach is of no use here, as ranges need
to be classified. An implementation based on "proxying" the
existing red-black tree set type, creating a tree for each
field, was considered, but deemed impractical due to the fact
that elements would need to be shared between trees, at least
as long as we want to keep UAPI changes to a minimum.
A stand-alone implementation of this algorithm is available at:
https://pipapo.lameexcu.se
together with notes about possible future optimisations
(in pipapo.c).
This algorithm was designed with data locality in mind, and can
be highly optimised for SIMD instruction sets, as the bulk of
the matching work is done with repetitive, simple bitwise
operations.
At this point, without further optimisations, nft_concat_range.sh
reports, for one AMD Epyc 7351 thread (2.9GHz, 512 KiB L1D$, 8 MiB
L2$):
TEST: performance
net,port [ OK ]
baseline (drop from netdev hook): 10190076pps
baseline hash (non-ranged entries): 6179564pps
baseline rbtree (match on first field only): 2950341pps
set with 1000 full, ranged entries: 2304165pps
port,net [ OK ]
baseline (drop from netdev hook): 10143615pps
baseline hash (non-ranged entries): 6135776pps
baseline rbtree (match on first field only): 4311934pps
set with 100 full, ranged entries: 4131471pps
net6,port [ OK ]
baseline (drop from netdev hook): 9730404pps
baseline hash (non-ranged entries): 4809557pps
baseline rbtree (match on first field only): 1501699pps
set with 1000 full, ranged entries: 1092557pps
port,proto [ OK ]
baseline (drop from netdev hook): 10812426pps
baseline hash (non-ranged entries): 6929353pps
baseline rbtree (match on first field only): 3027105pps
set with 30000 full, ranged entries: 284147pps
net6,port,mac [ OK ]
baseline (drop from netdev hook): 9660114pps
baseline hash (non-ranged entries): 3778877pps
baseline rbtree (match on first field only): 3179379pps
set with 10 full, ranged entries: 2082880pps
net6,port,mac,proto [ OK ]
baseline (drop from netdev hook): 9718324pps
baseline hash (non-ranged entries): 3799021pps
baseline rbtree (match on first field only): 1506689pps
set with 1000 full, ranged entries: 783810pps
net,mac [ OK ]
baseline (drop from netdev hook): 10190029pps
baseline hash (non-ranged entries): 5172218pps
baseline rbtree (match on first field only): 2946863pps
set with 1000 full, ranged entries: 1279122pps
v4:
- fix build for 32-bit architectures: 64-bit division needs
div_u64() (kbuild test robot <lkp@intel.com>)
v3:
- rework interface for field length specification,
NFT_SET_SUBKEY disappears and information is stored in
description
- remove scratch area to store closing element of ranges,
as elements now come with an actual attribute to specify
the upper range limit (Pablo Neira Ayuso)
- also remove pointer to 'start' element from mapping table,
closing key is now accessible via extension data
- use bytes right away instead of bits for field lengths,
this way we can also double the inner loop of the lookup
function to take care of upper and lower bits in a single
iteration (minor performance improvement)
- make it clearer that set operations are actually atomic
API-wise, but we can't e.g. implement flush() as one-shot
action
- fix type for 'dup' in nft_pipapo_insert(), check for
duplicates only in the next generation, and in general take
care of differentiating generation mask cases depending on
the operation (Pablo Neira Ayuso)
- report C implementation matching rate in commit message, so
that AVX2 implementation can be compared (Pablo Neira Ayuso)
v2:
- protect access to scratch maps in nft_pipapo_lookup() with
local_bh_disable/enable() (Florian Westphal)
- drop rcu_read_lock/unlock() from nft_pipapo_lookup(), it's
already implied (Florian Westphal)
- explain why partial allocation failures don't need handling
in pipapo_realloc_scratch(), rename 'm' to clone and update
related kerneldoc to make it clear we're not operating on
the live copy (Florian Westphal)
- add expicit check for priv->start_elem in
nft_pipapo_insert() to avoid ending up in nft_pipapo_walk()
with a NULL start element, and also zero it out in every
operation that might make it invalid, so that insertion
doesn't proceed with an invalid element (Florian Westphal)
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The new bitmap function bitmap_cut() copies bits from source to
destination by removing the region specified by parameters first
and cut, and remapping the bits above the cut region by right
shifting them.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Introduce a new nested netlink attribute, NFTA_SET_DESC_CONCAT, used
to specify the length of each field in a set concatenation.
This allows set implementations to support concatenation of multiple
ranged items, as they can divide the input key into matching data for
every single field. Such set implementations would be selected as
they specify support for NFT_SET_INTERVAL and allow desc->field_count
to be greater than one. Explicitly disallow this for nft_set_rbtree.
In order to specify the interval for a set entry, userspace would
include in NFTA_SET_DESC_CONCAT attributes field lengths, and pass
range endpoints as two separate keys, represented by attributes
NFTA_SET_ELEM_KEY and NFTA_SET_ELEM_KEY_END.
While at it, export the number of 32-bit registers available for
packet matching, as nftables will need this to know the maximum
number of field lengths that can be specified.
For example, "packets with an IPv4 address between 192.0.2.0 and
192.0.2.42, with destination port between 22 and 25", can be
expressed as two concatenated elements:
NFTA_SET_ELEM_KEY: 192.0.2.0 . 22
NFTA_SET_ELEM_KEY_END: 192.0.2.42 . 25
and NFTA_SET_DESC_CONCAT attribute would contain:
NFTA_LIST_ELEM
NFTA_SET_FIELD_LEN: 4
NFTA_LIST_ELEM
NFTA_SET_FIELD_LEN: 2
v4: No changes
v3: Complete rework, NFTA_SET_DESC_CONCAT instead of NFTA_SET_SUBKEY
v2: No changes
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add NFTA_SET_ELEM_KEY_END attribute to convey the closing element of the
interval between kernel and userspace.
This patch also adds the NFT_SET_EXT_KEY_END extension to store the
closing element value in this interval.
v4: No changes
v3: New patch
[sbrivio: refactor error paths and labels; add corresponding
nft_set_ext_type for new key; rebase]
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add helper function to parse the set element key netlink attribute.
v4: No changes
v3: New patch
[sbrivio: refactor error paths and labels; use NFT_DATA_VALUE_MAXLEN
instead of sizeof(*key) in helper, value can be longer than that;
rebase]
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Using IPv6 flow-label to swiftly route around avoid congested or
disconnected network path can greatly improve TCP reliability.
This patch adds SNMP counters and a OPT_STATS counter to track both
host-level and connection-level statistics. Network administrators
can use these counters to evaluate the impact of this new ability better.
Export count for rehash attempts to
1) two SNMP counters: TcpTimeoutRehash (rehash due to timeouts),
and TcpDuplicateDataRehash (rehash due to receiving duplicate
packets)
2) Timestamping API SOF_TIMESTAMPING_OPT_STATS.
Signed-off-by: Abdul Kabbani <akabbani@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Kevin(Yudong) Yang <yyd@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Julian Wiedmann says:
====================
s390/qeth: updates 2020-01-25
please apply the following patch series for qeth to your net-next tree.
This brings a number of cleanups for the init/teardown code paths.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
qeth_l?_stop_card() is _never_ called while in HARDSETUP state, and
there's no other usage of the card state that relies on the
DOWN -> HARDSETUP -> SOFTSETUP transition.
As related cleanup, remove the check in qeth_realloc_buffer_pool() as it
is already done by the callers.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When data is received on the READ channel, the matching logic for cmds
that are waiting for a reply is currently hard-coded into the channel's
main IO callback.
Move this into a per-cmd callback, so that we can apply custom matching
logic for each individual cmd.
This also allows us to remove the coarse-grained check for unexpected
non-IPA replies, since they will no longer match against _all_ pending
cmds.
Note that IDX cmds use _no_ matcher, since their reply is synchronously
received as part of the cmd's IO.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Large parts of the online/offline code are identical now, and cleaning
up the remaining stuff is easier with a shared core.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move some duplicated logic into a shared code path.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
qeth_l2_setup_bridgeport_attrs() is entirely unrelated to sysfs
functionality, move it where it belongs.
While at it merge all the bridgeport-specific code in the set-online
path together.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jeff Kirsher says:
====================
100GbE Intel Wired LAN Driver Updates 2020-01-25
This series contains updates to the ice driver to add support for RSS.
Henry and Tony enable the driver to write the filtering hardware tables
to allow for changing of RSS rules, also introduced and initialized the
structures for storing the configuration. Then followed it up by
creating an extraction sequence based on the packet header protocols to
be programmed. Next was storing the TCAM entry with the profile data
and VSI group in the respective software structures.
Md Fahad sets up the configuration to support RSS tables for the virtual
function (VF) driver (iavf). Add support for flow types TCP4, TCP6,
UDP4, UDP6, SCTP4 and SCTP6 for RSS via ethtool.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Bump version to 0.8.2-k
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Provide support to change or retrieve RSS hash options for a flow type.
The supported flow-types are: tcp4, tcp6, udp4, udp6, sctp4, sctp6.
Signed-off-by: Md Fahad Iqbal Polash <md.fahad.iqbal.polash@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Set configuration for hardware RSS tables for VFs.
Signed-off-by: Md Fahad Iqbal Polash <md.fahad.iqbal.polash@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Attempt to optimize TCAM entries and reduce table resource usage by
searching for profiles that can be reused. Provide resource cleanup
of both hardware and software structures.
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Henry Tieman <henry.w.tieman@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Write the hardware tables based on the populated software structures.
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Henry Tieman <henry.w.tieman@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Store the TCAM entry with the profile data and the VSI group in the
respective SW structures. This will be subsequently used to write out
the tables to hardware.
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Henry Tieman <henry.w.tieman@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Pull networking fixes from David Miller:
1) Off by one in mt76 airtime calculation, from Dan Carpenter.
2) Fix TLV fragment allocation loop condition in iwlwifi, from Luca
Coelho.
3) Don't confirm neigh entries when doing ipsec pmtu updates, from Xu
Wang.
4) More checks to make sure we only send TSO packets to lan78xx chips
that they can actually handle. From James Hughes.
5) Fix ip_tunnel namespace move, from William Dauchy.
6) Fix unintended packet reordering due to cooperation between
listification done by GRO and non-GRO paths. From Maxim
Mikityanskiy.
7) Add Jakub Kicincki formally as networking co-maintainer.
8) Info leak in airo ioctls, from Michael Ellerman.
9) IFLA_MTU attribute needs validation during rtnl_create_link(), from
Eric Dumazet.
10) Use after free during reload in mlxsw, from Ido Schimmel.
11) Dangling pointers are possible in tp->highest_sack, fix from Eric
Dumazet.
12) Missing *pos++ in various networking seq_next handlers, from Vasily
Averin.
13) CHELSIO_GET_MEM operation neds CAP_NET_ADMIN check, from Michael
Ellerman.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (109 commits)
firestream: fix memory leaks
net: cxgb3_main: Add CAP_NET_ADMIN check to CHELSIO_GET_MEM
net: bcmgenet: Use netif_tx_napi_add() for TX NAPI
tipc: change maintainer email address
net: stmmac: platform: fix probe for ACPI devices
net/mlx5e: kTLS, Do not send decrypted-marked SKBs via non-accel path
net/mlx5e: kTLS, Remove redundant posts in TX resync flow
net/mlx5e: kTLS, Fix corner-case checks in TX resync flow
net/mlx5e: Clear VF config when switching modes
net/mlx5: DR, use non preemptible call to get the current cpu number
net/mlx5: E-Switch, Prevent ingress rate configuration of uplink rep
net/mlx5: DR, Enable counter on non-fwd-dest objects
net/mlx5: Update the list of the PCI supported devices
net/mlx5: Fix lowest FDB pool size
net: Fix skb->csum update in inet_proto_csum_replace16().
netfilter: nf_tables: autoload modules from the abort path
netfilter: nf_tables: add __nft_chain_type_get()
netfilter: nf_tables_offload: fix check the chain offload flag
netfilter: conntrack: sctp: use distinct states for new SCTP connections
ipv6_route_seq_next should increase position index
...
A couple of fixes have come in that would be good to include in this
release:
- A fix for amount of memory on Beaglebone Black. Surfaced now since
GRUB2 doesn't update memory size in the booted kernel.
- A fix to make SPI interfaces work on am43x-epos-evm.
- Small Kconfig fix for OPTEE (adds a depend on MMU) to avoid build
failures.
-----BEGIN PGP SIGNATURE-----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=xQ63
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Olof Johansson:
"A couple of fixes have come in that would be good to include in this
release:
- A fix for amount of memory on Beaglebone Black. Surfaced now since
GRUB2 doesn't update memory size in the booted kernel.
- A fix to make SPI interfaces work on am43x-epos-evm.
- Small Kconfig fix for OPTEE (adds a depend on MMU) to avoid build
failures"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: dts: am43x-epos-evm: set data pin directions for spi0 and spi1
tee: optee: Fix compilation issue with nommu
ARM: dts: am335x-boneblack-common: fix memory size
In fs_open(), 'vcc' is allocated through kmalloc() and assigned to
'atm_vcc->dev_data.' In the following execution, if an error occurs, e.g.,
there is no more free channel, an error code EBUSY or ENOMEM will be
returned. However, 'vcc' is not deallocated, leading to memory leaks. Note
that, in normal cases where fs_open() returns 0, 'vcc' will be deallocated
in fs_close(). But, if fs_open() fails, there is no guarantee that
fs_close() will be invoked.
To fix this issue, deallocate 'vcc' before the error code is returned.
Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Missing netlink attribute sanity check for NFTA_OSF_DREG,
from Florian Westphal.
2) Use bitmap infrastructure in ipset to fix KASAN slab-out-of-bounds
reads, from Jozsef Kadlecsik.
3) Missing initial CLOSED state in new sctp connection through
ctnetlink events, from Jiri Wiesner.
4) Missing check for NFT_CHAIN_HW_OFFLOAD in nf_tables offload
indirect block infrastructure, from wenxu.
5) Add __nft_chain_type_get() to sanity check family and chain type.
6) Autoload modules from the nf_tables abort path to fix races
reported by syzbot.
7) Remove unnecessary skb->csum update on inet_proto_csum_replace16(),
from Praveen Chaudhary.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----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=IPUk
-----END PGP SIGNATURE-----
Merge tag 'for-5.5-rc8-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fix from David Sterba:
"Here's a last minute fix for a regression introduced in this
development cycle.
There's a small chance of a silent corruption when device replace and
NOCOW data writes happen at the same time in one block group. Metadata
or COW data writes are unaffected.
The extra fixup patch is there to silence an unnecessary warning"
* tag 'for-5.5-rc8-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: dev-replace: remove warning for unknown return codes when finished
btrfs: scrub: Require mandatory block group RO for dev-replace
that makes the interrupts work properly on it.
-----BEGIN PGP SIGNATURE-----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=0GUt
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v5.5-5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fix from Linus Walleij:
"A single fix for the Intel Sunrisepoint pin controller that makes the
interrupts work properly on it"
* tag 'pinctrl-v5.5-5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: sunrisepoint: Add missing Interrupt Status register offset
