IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
[ Upstream commit 847cbfc014adafeac401e19e349b0fd524f201c3 ]
As explained in commit 29d98f54a4fe ("net: enetc: allow hardware
timestamping on TX queues with tc-etf enabled"), hardware TX
timestamping requires an skb with skb->tstamp = 0. When a packet is sent
with SO_TXTIME, the skb->skb_mstamp_ns corrupts the value of skb->tstamp,
so the drivers need to explicitly reset skb->tstamp to zero after
consuming the TX time.
Create a helper named skb_txtime_consumed() which does just that. All
drivers which offload TC_SETUP_QDISC_ETF should implement it, and it
would make it easier to assess during review whether they do the right
thing in order to be compatible with hardware timestamping or not.
Suggested-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: db0b124f02ba ("igc: Enhance Qbv scheduling by using first flag bit")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 609d29a9d2429a840a2f1f44e77b71d58e3e9a33 ]
Using skb_csum_is_sctp is a easier way to validate it's a SCTP CRC
checksum offload packet, and yet it also makes igc support SCTP
CRC checksum offload for UDP and GRE encapped packets, just as it
does in igb driver.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: db0b124f02ba ("igc: Enhance Qbv scheduling by using first flag bit")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fa82117010430aff2ce86400f7328f55a31b48a6 ]
This patch is to define a inline function skb_csum_is_sctp(), and
also replace all places where it checks if it's a SCTP CSUM skb.
This function would be used later in many networking drivers in
the following patches.
Suggested-by: Alexander Duyck <alexander.duyck@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: db0b124f02ba ("igc: Enhance Qbv scheduling by using first flag bit")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fa69ee5aa48b5b52e8028c2eb486906e9998d081 ]
It turns out that usage of skb extensions can cause memory leaks. Ido
Schimmel reported: "[...] there are instances that blindly overwrite
'skb->extensions' by invoking skb_copy_header() after __alloc_skb()."
Therefore, give up on using skb extensions for KCOV handle, and instead
directly store kcov_handle in sk_buff.
Fixes: 6370cc3bbd8a ("net: add kcov handle to skb extensions")
Fixes: 85ce50d337d1 ("net: kcov: don't select SKB_EXTENSIONS when there is no NET")
Fixes: 97f53a08cba1 ("net: linux/skbuff.h: combine SKB_EXTENSIONS + KCOV handling")
Link: https://lore.kernel.org/linux-wireless/20201121160941.GA485907@shredder.lan/
Reported-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: Marco Elver <elver@google.com>
Link: https://lore.kernel.org/r/20201125224840.2014773-1-elver@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: db0b124f02ba ("igc: Enhance Qbv scheduling by using first flag bit")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7e43039a49c2da45edc1d9d7c9ede4003ab45a5f ]
There is a memory leaks reported by kmemleak:
unreferenced object 0xffff888116111000 (size 2048):
comm "modprobe", pid 817, jiffies 4294759745 (age 76.502s)
hex dump (first 32 bytes):
00 c4 0a 04 81 88 ff ff 08 10 11 16 81 88 ff ff ................
08 10 11 16 81 88 ff ff 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff815bcd82>] kmalloc_trace+0x22/0x60
[<ffffffff827e20ee>] phy_device_create+0x4e/0x90
[<ffffffff827e6072>] get_phy_device+0xd2/0x220
[<ffffffff827e7844>] mdiobus_scan+0xa4/0x2e0
[<ffffffff827e8be2>] __mdiobus_register+0x482/0x8b0
[<ffffffffa01f5d24>] r6040_init_one+0x714/0xd2c [r6040]
...
The problem occurs in probe process as follows:
r6040_init_one:
mdiobus_register
mdiobus_scan <- alloc and register phy_device,
the reference count of phy_device is 3
r6040_mii_probe
phy_connect <- connect to the first phy_device,
so the reference count of the first
phy_device is 4, others are 3
register_netdev <- fault inject succeeded, goto error handling path
// error handling path
err_out_mdio_unregister:
mdiobus_unregister(lp->mii_bus);
err_out_mdio:
mdiobus_free(lp->mii_bus); <- the reference count of the first
phy_device is 1, it is not released
and other phy_devices are released
// similarly, the remove process also has the same problem
The root cause is traced to the phy_device is not disconnected when
removes one r6040 device in r6040_remove_one() or on error handling path
after r6040_mii probed successfully. In r6040_mii_probe(), a net ethernet
device is connected to the first PHY device of mii_bus, in order to
notify the connected driver when the link status changes, which is the
default behavior of the PHY infrastructure to handle everything.
Therefore the phy_device should be disconnected when removes one r6040
device or on error handling path.
Fix it by adding phy_disconnect() when removes one r6040 device or on
error handling path after r6040_mii probed successfully.
Fixes: 3831861b4ad8 ("r6040: implement phylib")
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20221213125614.927754-1-lizetao1@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9f28157778ede0d4f183f7ab3b46995bb400abbe ]
Fix a slab-out-of-bounds read that occurs in nla_put() called from
nfc_genl_send_target() when target->sensb_res_len, which is duplicated
from an nfc_target in pn533, is too large as the nfc_target is not
properly initialized and retains garbage values. Clear nfc_targets with
memset() before they are used.
Found by a modified version of syzkaller.
BUG: KASAN: slab-out-of-bounds in nla_put
Call Trace:
memcpy
nla_put
nfc_genl_dump_targets
genl_lock_dumpit
netlink_dump
__netlink_dump_start
genl_family_rcv_msg_dumpit
genl_rcv_msg
netlink_rcv_skb
genl_rcv
netlink_unicast
netlink_sendmsg
sock_sendmsg
____sys_sendmsg
___sys_sendmsg
__sys_sendmsg
do_syscall_64
Fixes: 673088fb42d0 ("NFC: pn533: Send ATR_REQ directly for active device detection")
Fixes: 361f3cb7f9cf ("NFC: DEP link hook implementation for pn533")
Signed-off-by: Minsuk Kang <linuxlovemin@yonsei.ac.kr>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221214015139.119673-1-linuxlovemin@yonsei.ac.kr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1232946cf522b8de9e398828bde325d7c41f29dd ]
It is not allowed to call kfree_skb() or consume_skb() from hardware
interrupt context or with hardware interrupts being disabled.
skb_queue_purge() is called under spin_lock_irqsave() in handle_dmsg()
and hfcm_l1callback(), kfree_skb() is called in them, to fix this, use
skb_queue_splice_init() to move the dch->squeue to a free queue, also
enqueue the tx_skb and rx_skb, at last calling __skb_queue_purge() to
free the SKBs afer unlock.
Fixes: af69fb3a8ffa ("Add mISDN HFC multiport driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f0f596bd75a9d573ca9b587abb39cee0b916bb82 ]
It is not allowed to call kfree_skb() or consume_skb() from hardware
interrupt context or with hardware interrupts being disabled.
skb_queue_purge() is called under spin_lock_irqsave() in hfcpci_l2l1D(),
kfree_skb() is called in it, to fix this, use skb_queue_splice_init()
to move the dch->squeue to a free queue, also enqueue the tx_skb and
rx_skb, at last calling __skb_queue_purge() to free the SKBs afer unlock.
Fixes: 1700fe1a10dc ("Add mISDN HFC PCI driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ddc9648db162eee556edd5222d2808fe33730203 ]
It is not allowed to call kfree_skb() or consume_skb() from hardware
interrupt context or with hardware interrupts being disabled.
It should use dev_kfree_skb_irq() or dev_consume_skb_irq() instead.
The difference between them is free reason, dev_kfree_skb_irq() means
the SKB is dropped in error and dev_consume_skb_irq() means the SKB
is consumed in normal.
skb_queue_purge() is called under spin_lock_irqsave() in hfcusb_l2l1D(),
kfree_skb() is called in it, to fix this, use skb_queue_splice_init()
to move the dch->squeue to a free queue, also enqueue the tx_skb and
rx_skb, at last calling __skb_queue_purge() to free the SKBs afer unlock.
In tx_iso_complete(), dev_kfree_skb() is called to consume the transmitted
SKB, so replace it with dev_consume_skb_irq().
Fixes: 69f52adb2d53 ("mISDN: Add HFC USB driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f3b4a00f0f62da252c598310698dfc82ef2f2e2e ]
Currently macsec offload selection update routine accesses
the net device prior to holding the relevant lock.
Fix by holding the lock prior to the device access.
Fixes: dcb780fb2795 ("net: macsec: add nla support for changing the offloading selection")
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Emeel Hakim <ehakim@nvidia.com>
Link: https://lore.kernel.org/r/20221211075532.28099-1-ehakim@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9f57c6062bf3ce2c6ab9ba60040b34e8134ef259 ]
This path is not really an error path, so the tracepoint I added
there is just noise.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Stable-dep-of: 3bc8edc98bd4 ("nfsd: under NFSv4.1, fix double svc_xprt_put on rpc_create failure")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 90cd5c88830140c9fade92a8027e0fb2c6e4cc49 ]
The pic32_rtc_enable(pdata, 0) and clk_disable_unprepare(pdata->clk)
should be called in the error handling of devm_rtc_allocate_device(),
so we should move devm_rtc_allocate_device earlier in pic32_rtc_probe()
to fix it.
Fixes: 6515e23b9fde ("rtc: pic32: convert to devm_rtc_allocate_device")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Link: https://lore.kernel.org/r/20221123015953.1998521-1-cuigaosheng1@huawei.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5fb733d7bd6949e90028efdce8bd528c6ab7cf1e ]
The clk_disable_unprepare() should be called in the error handling
of clk_get_rate(), fix it.
Fixes: b5b2bdfc2893 ("rtc: st: Add new driver for ST's LPC RTC")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Link: https://lore.kernel.org/r/20221123014805.1993052-1-cuigaosheng1@huawei.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5fb45f95eec682621748b7cb012c6a8f0f981e6a ]
The for-loop was broken from the start. It translates to:
for (i = 0; i < 4; i += 4)
which means the loop statement is run only once, so only the highest
32-bit of the IPv6 address gets mangled.
Fix the loop increment.
Fixes: 0e07e25b481a ("netfilter: flowtable: fix NAT IPv6 offload mangling")
Fixes: 5c27d8d76ce8 ("netfilter: nf_flow_table_offload: add IPv6 support")
Signed-off-by: Qingfang DENG <dqfext@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9aafbfa5f57a4b75bafd3bed0191e8429c5fa618 ]
rtas-error-log-max is not the name of an RTAS function, so rtas_token()
is not the appropriate API for retrieving its value. We already have
rtas_get_error_log_max() which returns a sensible value if the property
is absent for any reason, so use that instead.
Fixes: 8d633291b4fc ("powerpc/eeh: pseries platform EEH error log retrieval")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
[mpe: Drop no-longer possible error handling as noticed by ajd]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221118150751.469393-6-nathanl@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3def164a5cedad9117859dd4610cae2cc59cb6d2 ]
slot_errbuf_lock has declared and initialized by DEFINE_SPINLOCK,
so we don't need to spin_lock_init again, drop it.
Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1652232476-9696-1-git-send-email-baihaowen@meizu.com
Stable-dep-of: 9aafbfa5f57a ("powerpc/pseries/eeh: use correct API for error log size")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 38e7d9c19276832ebb0277f415b9214bf7baeb37 ]
The pointer node is returned by of_parse_phandle() with refcount
incremented. We should use of_node_put() on it when done.
Fixes: b9e718e950c3 ("remoteproc: Introduce Qualcomm ADSP PIL")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221203070639.15128-1-yuancan@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e01ce676aaef3b13d02343d7e70f9637d93a3367 ]
The kfree() should be called when of_irq_get_byname() fails or
devm_request_threaded_irq() fails in qcom_add_sysmon_subdev(),
otherwise there will be a memory leak, so add kfree() to fix it.
Fixes: 027045a6e2b7 ("remoteproc: qcom: Add shutdown-ack irq")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221129105650.1539187-1-cuigaosheng1@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 45558b3abb87eeb2cedb8a59cb2699c120b5102a ]
As was documented in commit 0f02f491b786 ("pwm: sifive: Reduce time the
controller lock is held") a caller of pwm_sifive_update_clock() must
hold the mutex. So fix pwm_sifive_clock_notifier() to grab the lock.
While this necessity was only documented later, the race exists since
the driver was introduced.
Fixes: 9e37a53eb051 ("pwm: sifive: Add a driver for SiFive SoC PWM")
Reported-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Link: https://lore.kernel.org/r/20221018061656.1428111-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ef5bb8e7a7127218f826b9ccdf7508e7a339f4c2 ]
This driver treats IOMMU_DOMAIN_IDENTITY the same as UNMANAGED, which
cannot possibly be correct.
UNMANAGED domains are required to start out blocking all DMAs. This seems
to be what this driver does as it allocates a first level 'dt' for the IO
page table that is 0 filled.
Thus UNMANAGED looks like a working IO page table, and so IDENTITY must be
a mistake. Remove it.
Fixes: 4100b8c229b3 ("iommu: Add Allwinner H6 IOMMU driver")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/0-v1-97f0adf27b5e+1f0-s50_identity_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8f4ab7da904ab7027ccd43ddb4f0094e932a5877 ]
In check_all_cpu_dscr_defaults, opendir() opens the directory stream.
Add missing closedir() in the error path to release it.
In check_cpu_dscr_default, open() creates an open file descriptor.
Add missing close() in the error path to release it.
Fixes: ebd5858c904b ("selftests/powerpc: Add test for all DSCR sysfs interfaces")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221205084429.570654-1-linmq006@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 03f7c1d2a49acd30e38789cd809d3300721e9b0e ]
Based on getPerfCountInfo v1.018 documentation, some of the
hv_gpci events were deprecated for platform firmware that
supports counter_info_version 0x8 or above.
Fix the hv_gpci event list by adding a new attribute group
called "hv_gpci_event_attrs_v6" and a "ENABLE_EVENTS_COUNTERINFO_V6"
macro to enable these events for platform firmware
that supports counter_info_version 0x6 or below. And assigning
the hv_gpci event list based on output counter info version
of underlying plaform.
Fixes: 97bf2640184f ("powerpc/perf/hv-gpci: add the remaining gpci requests")
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Reviewed-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221130174513.87501-1-kjain@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4d0eea415216fe3791da2f65eb41399e70c7bedf ]
If platform_device_add() is not called or failed, it can not call
platform_device_del() to clean up memory, it should call
platform_device_put() in error case.
Fixes: 26f6cb999366 ("[POWERPC] fsl_soc: add support for fsl_spi")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221029111626.429971-1-yangyingliang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 32c5209214bd8d4f8c4e9d9b630ef4c671f58e79 ]
The interrupt frame detection and loads from the hypothetical pt_regs
are not bounds-checked. The next-frame validation only bounds-checks
STACK_FRAME_OVERHEAD, which does not include the pt_regs. Add another
test for this.
The user could set r1 to be equal to the address matching the first
interrupt frame - STACK_INT_FRAME_SIZE, which is in the previous page
due to the kernel redzone, and induce the kernel to load the marker from
there. Possibly this could cause a crash at least. If the user could
induce the previous page to contain a valid marker, then it might be
able to direct perf to read specific memory addresses in a way that
could be transmitted back to the user in the perf data.
Fixes: 20002ded4d93 ("perf_counter: powerpc: Add callchain support")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221127124942.1665522-4-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f110e5a250e3c5db417e094b3dd86f1c135291ca ]
Remove the potentially invalid modules.order instead of using
the temporary file.
Also, KBUILD_MODULES is don't care for single builds. No need to
cancel it.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Stable-dep-of: c7b98de745cf ("phy: qcom-qmp-combo: fix runtime suspend")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3e3005df73b535cb849cf4ec8075d6aa3c460f68 ]
If you attempt to build or install modules ('make modules(_install)'
with CONFIG_MODULES disabled, you will get a clear error message, but
nothing for external module builds.
Factor out the modules and modules_install rules into the common part,
so you will get the same error message when you try to build external
modules with CONFIG_MODULES=n.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Stable-dep-of: c7b98de745cf ("phy: qcom-qmp-combo: fix runtime suspend")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8b49670f3bb3f10cd4d5a6dca17f5a31b173ecdc ]
If remapping 'data->trig_page' fails, the 'data->eoi_mmio' need be unmapped
before returning from xive_spapr_populate_irq_data().
Fixes: eac1e731b59e ("powerpc/xive: guest exploitation of the XIVE interrupt controller")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221017032333.1852406-1-yangyingliang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1c4a4a4c8410be4a231a58b23e7a30923ff954ac ]
When building with automatic stack variable initialization, GCC 12
complains about variables defined outside of switch case statements.
Move the variable into the case that uses it, which silences the warning:
arch/powerpc/xmon/xmon.c: In function ‘bpt_cmds’:
arch/powerpc/xmon/xmon.c:1529:13: warning: statement will never be executed [-Wswitch-unreachable]
1529 | int mode;
| ^~~~
Fixes: 09b6c1129f89 ("powerpc/xmon: Fix compile error with PPC_8xx=y")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/YySE6FHiOcbWWR+9@work
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 30662217885d7341161924acf1665924d7d37d64 ]
Since commit 4ad8622dc548 ("powerpc/8xx: Implement hw_breakpoint"),
8xx has breakpoints so there is no reason to opt breakpoint logic
out of xmon for the 8xx.
Fixes: 4ad8622dc548 ("powerpc/8xx: Implement hw_breakpoint")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b0607f1113d1558e73476bb06db0ee16d31a6e5b.1608716197.git.christophe.leroy@csgroup.eu
Stable-dep-of: 1c4a4a4c8410 ("powerpc/xmon: Fix -Wswitch-unreachable warning in bpt_cmds")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1d09697ff22908ae487fc8c4fbde1811732be523 ]
of_get_next_parent() returns a node pointer with refcount incremented,
we should use of_node_put() on it when not need anymore.
This function only calls of_node_put() in normal path,
missing it in the error path.
Add missing of_node_put() to avoid refcount leak.
Fixes: f24be42aab37 ("cxl: Add psl9 specific code")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Acked-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220605060038.62217-1-linmq006@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5836947613ef33d311b4eff6a32d019580a214f5 ]
The error handling path of mpc52xx_lpbfifo_probe() has a request_irq()
that is not balanced by a corresponding free_irq().
Add the missing call, as already done in the remove function.
Fixes: 3c9059d79f5e ("powerpc/5200: add LocalPlus bus FIFO device driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/dec1496d46ccd5311d0f6e9f9ca4238be11bf6a6.1643440531.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dbaa3105736d4d73063ea0a3b01cd7fafce924e6 ]
The function ioremap() in macio_init() can fail, so its return value
should be checked.
Fixes: 36874579dbf4c ("[PATCH] powerpc: macio-adb build fix")
Reported-by: Hacash Robot <hacashRobot@santino.com>
Signed-off-by: Xie Shaowen <studentxswpy@163.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220802074148.3213659-1-studentxswpy@163.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5ca86eae55a2f006e6c1edd2029b2cacb6979515 ]
Afer commit 1fa5ae857bb1 ("driver core: get rid of struct device's
bus_id string array"), the name of device is allocated dynamically. It
needs to be freed when of_device_register() fails. Call put_device() to
give up the reference that's taken in device_initialize(), so that it
can be freed in kobject_cleanup() when the refcount hits 0.
macio device is freed in macio_release_dev(), so the kfree() can be
removed.
Fixes: 1fa5ae857bb1 ("driver core: get rid of struct device's bus_id string array")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221104032551.1075335-1-yangyingliang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6cf0981c2233f97d56938d9d61845383d6eb227c ]
As comment of pci_get_domain_bus_and_slot() says, it returns
a pci device with refcount increment, when finish using it,
the caller must decrement the reference count by calling
pci_dev_put(). So call it before returning from ppr_notifier()
to avoid refcount leak.
Fixes: daae2d25a477 ("iommu/amd: Don't copy GCR3 table root pointer")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221118093604.216371-1-yangyingliang@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a6ceee26fd5ed9b5bd37322b1ca88e4548cee4a3 ]
If the alarms are disabled the topmost bit (AEN_*) is set in the alarm
registers. This is also interpreted in BCD number leading to this warning:
rtc rtc0: invalid alarm value: 2022-09-21T80:80:80
Fix this by masking alarm enabling and reserved bits.
Fixes: 05cb3a56ee8c ("rtc: pcf85063: add alarm support")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20220921074141.3903104-1-alexander.stein@ew.tq-group.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0462681e207ccc44778a77b3297af728b1cf5b9f ]
On an iMX6ULL the following message appears when a wakealarm is set:
echo 0 > /sys/class/rtc/rtc1/wakealarm
rtc rtc1: Timeout trying to get valid LPSRT Counter read
This does not always happen but is reproducible quite often (7 out of 10
times). The problem appears because the iMX6ULL is not able to read the
registers within one 32kHz clock cycle which is the base clock of the
RTC. Therefore, this patch allows a difference of up to 320 cycles
(10ms). 10ms was chosen to be big enough even on systems with less cpu
power (e.g. iMX6ULL). According to the reference manual a difference is
fine:
- If the two consecutive reads are similar, the value is correct.
The values have to be similar, not equal.
Fixes: cd7f3a249dbe ("rtc: snvs: Add timeouts to avoid kernel lockups")
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Signed-off-by: Francesco Dolcini <francesco@dolcini.it>
Link: https://lore.kernel.org/r/20221106115915.7930-1-francesco@dolcini.it
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 83ebb7b3036d151ee39a4a752018665648fc3bd4 ]
Make cmos_do_remove() drop the ACPI RTC fixed event handler so as to
prevent it from operating on stale data in case the event triggers
after driver removal.
Fixes: 311ee9c151ad ("rtc: cmos: allow using ACPI for RTC alarm instead of HPET")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/2224609.iZASKD2KPV@kreacher
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d13e9ad9f5146f066a5c5a1cc993d09e4fb21ead ]
The names of rtc_wake_setup() and cmos_wake_setup() don't indicate
that these functions are ACPI-related, which is the case, and the
former doesn't really reflect the role of the function.
Rename them to acpi_rtc_event_setup() and acpi_cmos_wake_setup(),
respectively, to address this shortcoming.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/3225614.44csPzL39Z@kreacher
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Stable-dep-of: 83ebb7b3036d ("rtc: cmos: Disable ACPI RTC event on removal")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dca4d3b71c8a09a16951add656711fbd6f5bfbb0 ]
Reorder the ACPI-related code before cmos_do_probe() so as to eliminate
excessive forward declarations of some functions.
While at it, for consistency, add the inline modifier to the
definitions of empty stub static funtions and remove it from the
corresponding definitions of functions with non-empty bodies.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/13157911.uLZWGnKmhe@kreacher
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Stable-dep-of: 83ebb7b3036d ("rtc: cmos: Disable ACPI RTC event on removal")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 375bbba09692fe4c5218eddee8e312dd733fa846 ]
To reduce code duplication, move the invocation of rtc_wake_setup()
into cmos_do_probe() and simplify the callers of the latter.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/2143522.irdbgypaU6@kreacher
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Stable-dep-of: 83ebb7b3036d ("rtc: cmos: Disable ACPI RTC event on removal")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 508ccdfb86b21da37ad091003a4d4567709d5dfb ]
Notice that cmos_wake_setup() is the only user of acpi_rtc_info and it
can operate on the cmos_rtc variable directly, so it need not set the
platform_data pointer before cmos_do_probe() is called. Instead, it
can be called by cmos_do_probe() in the case when the platform_data
pointer is not set to implement the default behavior (which is to use
the FADT information as long as ACPI support is enabled).
Modify the code accordingly.
While at it, drop a comment that doesn't really match the code it is
supposed to be describing.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/4803444.31r3eYUQgx@kreacher
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Stable-dep-of: 83ebb7b3036d ("rtc: cmos: Disable ACPI RTC event on removal")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit db4e955ae333567dea02822624106c0b96a2f84f ]
Now that rtc_wake_setup is called outside of cmos_wake_setup, it also need
to be defined on non-ACPI platforms.
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20221018203512.2532407-1-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Stable-dep-of: 83ebb7b3036d ("rtc: cmos: Disable ACPI RTC event on removal")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0782b66ed2fbb035dda76111df0954515e417b24 ]
Commit 4919d3eb2ec0 ("rtc: cmos: Fix event handler registration
ordering issue") overlooked the fact that cmos_do_probe() depended
on the preparations carried out by cmos_wake_setup() and the wake
alarm stopped working after the ordering of them had been changed.
Address this by partially reverting commit 4919d3eb2ec0 so that
cmos_wake_setup() is called before cmos_do_probe() again and moving
the rtc_wake_setup() invocation from cmos_wake_setup() directly to the
callers of cmos_do_probe() where it will happen after a successful
completion of the latter.
Fixes: 4919d3eb2ec0 ("rtc: cmos: Fix event handler registration ordering issue")
Reported-by: Zhang Rui <rui.zhang@intel.com>
Reported-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/5887691.lOV4Wx5bFT@kreacher
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Stable-dep-of: 83ebb7b3036d ("rtc: cmos: Disable ACPI RTC event on removal")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4919d3eb2ec0ee364f7e3cf2d99646c1b224fae8 ]
Because acpi_install_fixed_event_handler() enables the event
automatically on success, it is incorrect to call it before the
handler routine passed to it is ready to handle events.
Unfortunately, the rtc-cmos driver does exactly the incorrect thing
by calling cmos_wake_setup(), which passes rtc_handler() to
acpi_install_fixed_event_handler(), before cmos_do_probe(), because
rtc_handler() uses dev_get_drvdata() to get to the cmos object
pointer and the driver data pointer is only populated in
cmos_do_probe().
This leads to a NULL pointer dereference in rtc_handler() on boot
if the RTC fixed event happens to be active at the init time.
To address this issue, change the initialization ordering of the
driver so that cmos_wake_setup() is always called after a successful
cmos_do_probe() call.
While at it, change cmos_pnp_probe() to call cmos_do_probe() after
the initial if () statement used for computing the IRQ argument to
be passed to cmos_do_probe() which is cleaner than calling it in
each branch of that if () (local variable "irq" can be of type int,
because it is passed to that function as an argument of type int).
Note that commit 6492fed7d8c9 ("rtc: rtc-cmos: Do not check
ACPI_FADT_LOW_POWER_S0") caused this issue to affect a larger number
of systems, because previously it only affected systems with
ACPI_FADT_LOW_POWER_S0 set, but it is present regardless of that
commit.
Fixes: 6492fed7d8c9 ("rtc: rtc-cmos: Do not check ACPI_FADT_LOW_POWER_S0")
Fixes: a474aaedac99 ("rtc-cmos: move wake setup from ACPI glue into RTC driver")
Link: https://lore.kernel.org/linux-acpi/20221010141630.zfzi7mk7zvnmclzy@techsingularity.net/
Reported-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Mel Gorman <mgorman@techsingularity.net>
Link: https://lore.kernel.org/r/5629262.DvuYhMxLoT@kreacher
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Stable-dep-of: 83ebb7b3036d ("rtc: cmos: Disable ACPI RTC event on removal")
Signed-off-by: Sasha Levin <sashal@kernel.org>
