IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Add Global Command Engine(GCE) header file to define the GCE thread priority,
GCE subsys id, event and constant for mt8188.
Signed-off-by: Elvis Wang <Elvis.Wang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno<angelogioacchino.delregno@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)
iEYEABECAAYFAmOcmvEACgkQ+iyteGJfRso1OwCfWAZIdbdWdeEVq33zAT4/TZKE
foYAn0ebKrOX26HEAmGgZy4Ze2pdFxVo
=toMy
-----END PGP SIGNATURE-----
Merge tag 'linux-watchdog-6.2-rc1' of git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- Add Advantech EC watchdog driver
- Add support for MT6795 Helio X10 watchdog and toprgu
- Add support for MT8188 watchdog device
- Remove #ifdef guards for PM related functions
- Other fixes and improvements
* tag 'linux-watchdog-6.2-rc1' of git://www.linux-watchdog.org/linux-watchdog:
watchdog: aspeed: Enable pre-timeout interrupt
watchdog: iTCO_wdt: Set NO_REBOOT if the watchdog is not already running
watchdog: rn5t618: add support for read out bootstatus
watchdog: kempld: Remove #ifdef guards for PM related functions
watchdog: omap: Remove #ifdef guards for PM related functions
watchdog: twl4030: Remove #ifdef guards for PM related functions
watchdog: at91rm9200: Remove #ifdef guards for PM related functions
watchdog: Add Advantech EC watchdog driver
dt-bindings: watchdog: mediatek,mtk-wdt: Add compatible for MT8173
dt-bindings: watchdog: mediatek,mtk-wdt: Add compatible for MT6795
dt-bindings: watchdog: mediatek: Convert mtk-wdt to json-schema
watchdog: mediatek: mt8188: add wdt support
dt-bindings: reset: mt8188: add toprgu reset-controller header file
dt-bindings: watchdog: Add compatible for MediaTek MT8188
watchdog: mtk_wdt: Add support for MT6795 Helio X10 watchdog and toprgu
time around. The core framework is effectively unchanged, with the majority of
the diff going to the Qualcomm clk driver directory because they added two 3k
line files that are almost all clk data (Abel Vesa from Linaro tried to shrink
the number of lines down, but it doesn't seem to be possible without
sacrificing readability). The second big driver this time around is the
Rockchip rk3588 clk and reset unit, at _only_ 2.5k lines.
Ignoring the big clk drivers from the familiar SoC vendors, there's just a
bunch of little clk driver updates and fixes throughout here. It's the usual
set of clk data fixups to describe proper parents, or add frequencies to
frequency tables, or plug memory leaks when function calls fail. Also, some
drivers are converted to use modern clk_hw APIs, which is always nice to see.
And data is deduplicated, leading to a smaller kernel Image. Overall this batch
has a larger collection of cleanups than it typically does. Maybe that means
there are less new SoCs right now that need supporting, and the focus has
shifted to quality and reliability. I can dream.
New Drivers:
- Frequency hopping controller hardware on MediaTek MT8186
- Global clock controller for Qualcomm SM8550
- Display clock controller for Qualcomm SC8280XP
- RPMh clock controller for Qualcomm QDU1000 and QRU1000 SoCs
- CPU PLL on MStar/SigmaStar SoCs
- Support for the clock and reset unit of the Rockchip rk3588
Updates:
- Tracepoints for clk_rate_request structures
- Debugfs support for fractional divider clk
- Make MxL's CGU driver secure compatible
- Ingenic JZ4755 SoC clk support
- Support audio clks on X1000 SoCs
- Remove flags from univ/main/syspll child fixed factor clocks across
MediaTek platforms
- Fix clock dependency for ADC on MediaTek MT7986
- Fix parent for FlexSPI clock for i.MX93
- Add USB suspend clock on i.MX8MP
- Unmap anatop base on error for i.MX93 driver
- Change enet clock parent to wakeup_axi_root for i.MX93
- Drop LPIT1, LPIT2, TPM1 and TPM3 clocks for i.MX93
- Mark HSIO bus clock and SYS_CNT clock as critical on i.MX93
- Add 320MHz and 640MHz entries to PLL146x
- Add audio shared gate and SAI clocks for i.MX8MP
- Fix a possible memory leak in the error path of rockchip PLL creation
- Fix header guard for V3S clocks
- Add IR module clock for f1c100s
- Correct the parent clocks for the (High Speed) Serial Communication
Interfaces with FIFO ((H)SCIF) modules and the mixed-up Ethernet
Switch clocks on Renesas R-Car S4-8
- Add timer (TMU, CMT) and Cortex-A76 CPU core (Z0) clocks on Renesas
R-Car V4H
- Two PLL driver fixups for the Amlogic clk driver
- Round SD clock rate to improve parent clock selection
- Add Ethernet Switch and internal SASYNCPER clocks on Renesas R-Car
S4-8
- Add DMA (SYS-DMAC), SPI (MSIOF), external interrupt (INTC-EX) serial
(SCIF), PWM (PWM and TPU), SDHI, and HyperFLASH/QSPI (RPC-IF) clocks
on Renesas R-Car V4H
- Add Multi-Function Timer Pulse Unit (MTU3a) clock and reset on
Renesas RZ/G2L
- Fix endless loop on Renesas RZ/N1
- Correct the parent clocks for the High Speed Serial Communication
Interfaces with FIFO (HSCIF) modules on the Renesas R-Car V4H SoC
Note: HSCIF0 is used for the serial console on the White-Hawk
development board
- Various clk DT binding improvements and conversions to YAML
- Qualcomm SM8150/SM8250 display clock controller cleaned up
- Some missing clocks for Qualcomm SM8350 added
- Qualcomm MSM8974 Global and Multimedia clock controllers transitioned
to parent_data and parent_hws
- Use parent_data and add network resets for Qualcomm IPQ8074
- Qualcomm Krait clock controller modernized
- Fix pm_runtime usage in Qualcomm SC7180 and SC7280 LPASS clock
controllers
- Enable retention mode on Qualcomm SM8250 USB GDSCs
- Cleanup Qualcomm RPM and RPMh clock drivers to avoid duplicating
clocks which definition could be shared between platforms
- Various NULL pointer checks added for allocations
-----BEGIN PGP SIGNATURE-----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=6vbl
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk driver updates from Stephen Boyd:
"A pile of clk driver updates with a small tracepoint patch to the clk
core this time around.
The core framework is effectively unchanged, with the majority of the
diff going to the Qualcomm clk driver directory because they added two
3k line files that are almost all clk data (Abel Vesa from Linaro
tried to shrink the number of lines down, but it doesn't seem to be
possible without sacrificing readability).
The second big driver this time around is the Rockchip rk3588 clk and
reset unit, at _only_ 2.5k lines.
Ignoring the big clk drivers from the familiar SoC vendors, there's
just a bunch of little clk driver updates and fixes throughout here.
It's the usual set of clk data fixups to describe proper parents, or
add frequencies to frequency tables, or plug memory leaks when
function calls fail. Also, some drivers are converted to use modern
clk_hw APIs, which is always nice to see. And data is deduplicated,
leading to a smaller kernel Image.
Overall this batch has a larger collection of cleanups than it
typically does. Maybe that means there are less new SoCs right now
that need supporting, and the focus has shifted to quality and
reliability. I can dream.
New Drivers:
- Frequency hopping controller hardware on MediaTek MT8186
- Global clock controller for Qualcomm SM8550
- Display clock controller for Qualcomm SC8280XP
- RPMh clock controller for Qualcomm QDU1000 and QRU1000 SoCs
- CPU PLL on MStar/SigmaStar SoCs
- Support for the clock and reset unit of the Rockchip rk3588
Updates:
- Tracepoints for clk_rate_request structures
- Debugfs support for fractional divider clk
- Make MxL's CGU driver secure compatible
- Ingenic JZ4755 SoC clk support
- Support audio clks on X1000 SoCs
- Remove flags from univ/main/syspll child fixed factor clocks across
MediaTek platforms
- Fix clock dependency for ADC on MediaTek MT7986
- Fix parent for FlexSPI clock for i.MX93
- Add USB suspend clock on i.MX8MP
- Unmap anatop base on error for i.MX93 driver
- Change enet clock parent to wakeup_axi_root for i.MX93
- Drop LPIT1, LPIT2, TPM1 and TPM3 clocks for i.MX93
- Mark HSIO bus clock and SYS_CNT clock as critical on i.MX93
- Add 320MHz and 640MHz entries to PLL146x
- Add audio shared gate and SAI clocks for i.MX8MP
- Fix a possible memory leak in the error path of rockchip PLL
creation
- Fix header guard for V3S clocks
- Add IR module clock for f1c100s
- Correct the parent clocks for the (High Speed) Serial Communication
Interfaces with FIFO ((H)SCIF) modules and the mixed-up Ethernet
Switch clocks on Renesas R-Car S4-8
- Add timer (TMU, CMT) and Cortex-A76 CPU core (Z0) clocks on Renesas
R-Car V4H
- Two PLL driver fixups for the Amlogic clk driver
- Round SD clock rate to improve parent clock selection
- Add Ethernet Switch and internal SASYNCPER clocks on Renesas R-Car
S4-8
- Add DMA (SYS-DMAC), SPI (MSIOF), external interrupt (INTC-EX)
serial (SCIF), PWM (PWM and TPU), SDHI, and HyperFLASH/QSPI
(RPC-IF) clocks on Renesas R-Car V4H
- Add Multi-Function Timer Pulse Unit (MTU3a) clock and reset on
Renesas RZ/G2L
- Fix endless loop on Renesas RZ/N1
- Correct the parent clocks for the High Speed Serial Communication
Interfaces with FIFO (HSCIF) modules on the Renesas R-Car V4H SoC
Note: HSCIF0 is used for the serial console on the White-Hawk
development board
- Various clk DT binding improvements and conversions to YAML
- Qualcomm SM8150/SM8250 display clock controller cleaned up
- Some missing clocks for Qualcomm SM8350 added
- Qualcomm MSM8974 Global and Multimedia clock controllers
transitioned to parent_data and parent_hws
- Use parent_data and add network resets for Qualcomm IPQ8074
- Qualcomm Krait clock controller modernized
- Fix pm_runtime usage in Qualcomm SC7180 and SC7280 LPASS clock
controllers
- Enable retention mode on Qualcomm SM8250 USB GDSCs
- Cleanup Qualcomm RPM and RPMh clock drivers to avoid duplicating
clocks which definition could be shared between platforms
- Various NULL pointer checks added for allocations"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (188 commits)
clk: nomadik: correct struct name kernel-doc warning
clk: lmk04832: fix kernel-doc warnings
clk: lmk04832: drop superfluous #include
clk: lmk04832: drop unnecessary semicolons
clk: lmk04832: declare variables as const when possible
clk: socfpga: Fix memory leak in socfpga_gate_init()
clk: microchip: enable the MPFS clk driver by default if SOC_MICROCHIP_POLARFIRE
clk: st: Fix memory leak in st_of_quadfs_setup()
clk: samsung: Fix memory leak in _samsung_clk_register_pll()
clk: Add trace events for rate requests
clk: Store clk_core for clk_rate_request
clk: qcom: rpmh: add support for SM6350 rpmh IPA clock
clk: qcom: mmcc-msm8974: use parent_hws/_data instead of parent_names
clk: qcom: mmcc-msm8974: move clock parent tables down
clk: qcom: mmcc-msm8974: use ARRAY_SIZE instead of specifying num_parents
clk: qcom: gcc-msm8974: use parent_hws/_data instead of parent_names
clk: qcom: gcc-msm8974: move clock parent tables down
clk: qcom: gcc-msm8974: use ARRAY_SIZE instead of specifying num_parents
dt-bindings: clocks: qcom,mmcc: define clocks/clock-names for MSM8974
dt-bindings: clock: split qcom,gcc-msm8974,-msm8226 to the separate file
...
Core changes:
- Minor but nice and important documentation clean-ups.
New drivers:
- New subdriver for the Qualcomm SDM670 SoC.
- New subdriver for the Intel Moorefield SoC.
- New trivial support for the NXP Freescale i.MXRT1170 SoC.
Other changes and improvements
- A major clean-up of the Qualcomm pin control device tree bindings
by Krzysztof.
- A major header clean-up by Andy.
- Some immutable irqchip clean-up for the Actions Semiconductor
and Nuvoton drivers.
- GPIO helpers for The Cypress cy8c95x0 driver.
- Bias handling in the Mediatek MT7986 driver.
- Remove the unused pins-are-numbered concept that never flew.
-----BEGIN PGP SIGNATURE-----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=PhTP
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"The two large chunks is the header clean-up from Andy and the Qualcomm
DT bindings clean-up from Krzysztof. Each which could give rise to
conflicts, but I haven't seen any.
The YAML conversions happening around the device tree is the biggest
item in the series and is the result of Rob Herrings ambition to
autovalidate these trees against strict schemas and it is paying off
in lots of bugs found and ever prettier device trees. Sooner or later
the transition will be complete, Krzysztof is fixing up all of the
Qualcomm stuff, which is pretty voluminous.
Core changes:
- minor but nice and important documentation clean-ups
New drivers:
- subdriver for the Qualcomm SDM670 SoC
- subdriver for the Intel Moorefield SoC
- trivial support for the NXP Freescale i.MXRT1170 SoC
Other changes and improvements
- major clean-up of the Qualcomm pin control device tree bindings by
Krzysztof
- major header clean-up by Andy
- some immutable irqchip clean-up for the Actions Semiconductor and
Nuvoton drivers
- GPIO helpers for The Cypress cy8c95x0 driver
- bias handling in the Mediatek MT7986 driver
- remove the unused pins-are-numbered concept that never flew"
* tag 'pinctrl-v6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (231 commits)
pinctrl: thunderbay: fix possible memory leak in thunderbay_build_functions()
dt-bindings: pinctrl: st,stm32: Deprecate pins-are-numbered
dt-bindings: pinctrl: mediatek,mt65xx: Deprecate pins-are-numbered
pinctrl: stm32: Remove check for pins-are-numbered
pinctrl: mediatek: common: Remove check for pins-are-numbered
pinctrl: qcom: remove duplicate included header files
pinctrl: sunxi: d1: Add CAN bus pinmuxes
pinctrl: loongson2: Fix some const correctness
pinctrl: pinconf-generic: add missing of_node_put()
pinctrl: intel: Enumerate PWM device when community has a capability
pwm: lpss: Rename pwm_lpss_probe() --> devm_pwm_lpss_probe()
pwm: lpss: Allow other drivers to enable PWM LPSS
pwm: lpss: Include headers we are the direct user of
pwm: lpss: Rename MAX_PWMS --> LPSS_MAX_PWMS
pwm: Add a stub for devm_pwmchip_add()
pinctrl: k210: call of_node_put()
pinctrl: starfive: Use existing variable gpio
dt-bindings: pinctrl: semtech,sx150xq: fix match patterns for 16 GPIOs matching
pinconf-generic: fix style issues in pin_config_param doc
pinctrl: pinctrl-loongson2: fix Kconfig dependency
...
-----BEGIN PGP SIGNATURE-----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=i0X1
-----END PGP SIGNATURE-----
Merge tag 'media/v6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- DVB core changes to avoid refcount troubles and UAF
- DVB API/core has gained support for DVB-C2 and DVB-S2X
- New sensor drivers: ov08x40, ov4689.c, st-vgxy61 and tc358746.c
- Removal of an unused sensor driver: s5k4ecgx
- Move microchip_csi2dc to a new directory, named after the
manufacturer
- Add media controller support to Microship drivers
- Old Atmel/Microship drivers that don't use media controler got moved
to staging
- New drivers added for Renesas RZ/G2L CRU and MIPI CSI-2 support
- Allwinner A31 camera sensor driver code was now split into a bridge
and a separate processor driver
- Added a virtual stateless decoder driver in order to test core
support for stateless drivers and test userspace apps using it
- removed platform-based support for ov9650, as this is not used
anymore
- atomisp now uses videobuf2 and supports normal mmap mode
- the imx7-media-csi driver got promoted from staging
- rcar-vin driver has gained support for gen3 UDS (Up Down Scaler)
- most i2c drivers now use I2C .probe_new() kAPI
- lots of drivers fixes, cleanups and improvements
* tag 'media/v6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (544 commits)
media: s5c73m3: Switch to GPIO descriptors
media: i2c: s5k5baf: switch to using gpiod API
media: i2c: s5k6a3: switch to using gpiod API
media: imx: remove code for non-existing config IMX_GPT_ICAP
media: si470x: Fix use-after-free in si470x_int_in_callback()
media: staging: stkwebcam: Restore MEDIA_{USB,CAMERA}_SUPPORT dependencies
media: coda: Add check for kmalloc
media: coda: Add check for dcoda_iram_alloc
dt-bindings: media: s5c73m3: Fix reset-gpio descriptor
media: dt-bindings: allwinner: h6-vpu-g2: Add IOMMU reference property
media: s5k4ecgx: Delete driver
media: s5k4ecgx: Switch to GPIO descriptors
media: Switch to use dev_err_probe() helper
headers: Remove some left-over license text in include/uapi/linux/v4l2-*
headers: Remove some left-over license text in include/uapi/linux/dvb/
media: usb: pwc-uncompress: Use flex array destination for memcpy()
media: s5p-mfc: Fix to handle reference queue during finishing
media: s5p-mfc: Clear workbit to handle error condition
media: s5p-mfc: Fix in register read and write for H264
media: imx: Use get_mbus_config instead of parsing upstream DT endpoints
...
- Tracepoints for clk_rate_request structures
* clk-mediatek:
clk: mediatek: fix dependency of MT7986 ADC clocks
clk: mediatek: Change PLL register API for MT8186
clk: mediatek: Add new clock driver to handle FHCTL hardware
dt-bindings: clock: mediatek: Add new bindings of MediaTek frequency hopping
clk: mediatek: Export PLL operations symbols
clk: mediatek: mt8186-topckgen: Add GPU clock mux notifier
clk: mediatek: mt8186-mfg: Propagate rate changes to parent
clk: mediatek: mt8195-topckgen: Drop flags for main/univpll fixed factors
clk: mediatek: mt8192: Drop flags for main/univpll fixed factors
clk: mediatek: mt6795-topckgen: Drop flags for main/sys/univpll fixed factors
clk: mediatek: mt8173: Drop flags for main/sys/univpll fixed factors
clk: mediatek: mt8183: Drop flags for sys/univpll fixed factors
clk: mediatek: mt8183: Compress top_divs array entries
clk: mediatek: mt8186-topckgen: Drop flags for main/univpll fixed factors
clk: mediatek: clk-mtk: Allow specifying flags on mtk_fixed_factor clocks
* clk-trace:
clk: Add trace events for rate requests
clk: Store clk_core for clk_rate_request
* clk-qcom: (69 commits)
clk: qcom: rpmh: add support for SM6350 rpmh IPA clock
clk: qcom: mmcc-msm8974: use parent_hws/_data instead of parent_names
clk: qcom: mmcc-msm8974: move clock parent tables down
clk: qcom: mmcc-msm8974: use ARRAY_SIZE instead of specifying num_parents
clk: qcom: gcc-msm8974: use parent_hws/_data instead of parent_names
clk: qcom: gcc-msm8974: move clock parent tables down
clk: qcom: gcc-msm8974: use ARRAY_SIZE instead of specifying num_parents
dt-bindings: clocks: qcom,mmcc: define clocks/clock-names for MSM8974
dt-bindings: clock: split qcom,gcc-msm8974,-msm8226 to the separate file
clk: qcom: gcc-ipq4019: switch to devm_clk_notifier_register
clk: qcom: rpmh: remove usage of platform name
clk: qcom: rpmh: rename VRM clock data
clk: qcom: rpmh: rename ARC clock data
clk: qcom: rpmh: support separate symbol name for the RPMH clocks
clk: qcom: rpmh: remove platform names from BCM clocks
clk: qcom: rpmh: drop all _ao names
clk: qcom: rpmh: reuse common duplicate clocks
clk: qcom: rpmh: group clock definitions together
clk: qcom: rpm: drop the platform from clock definitions
clk: qcom: rpm: drop the _clk suffix completely
...
* clk-microchip:
clk: microchip: enable the MPFS clk driver by default if SOC_MICROCHIP_POLARFIRE
clk: microchip: check for null return of devm_kzalloc()
The devicetree changes contain exactly 1000 non-merge changesets,
including a number of new arm64 SoC variants from Qualcomm and Apple,
as well as the Renesas r9a07g043f/u chip in both arm64 and riscv variants
While we have occasionally merged support for non-arm SoCs in the past,
this is now the normal path for riscv devicetree files.
The most notable changes, by SoC platform, are:
- The Apple T6000 (M1 Pro), T6001 (M1 Max) and T6002 (M2 Ultra)
chips now have initial support. This is particularly nice as I am
typing this on a T6002 Mac Studio with only a small number of driver
patches.
- Qualcomm MSM8996 Pro (Snapdragon 821), SM6115 (Snapdragon 662), SM4250
(Snapdragon 460), SM6375 (Snapdragon 695), SDM670 (Snapdragon 670),
MSM8976 (Snapdragon 652) and MSM8956 (Snapdragon 650) are all mobile
phone chips that are closely related to others we already support.
Adding those helps support more phones and we add several models
from Sony (Xperia 10 IV, 5 IV, X, and X compact), OnePlus (One, 3,
3T, and Nord N100), Xiaomi (Poco F1, Mi6), Huawei (Watch) and Google
(Pixel 3a). There are also new variants of the Herobrine and Trogdor
chromebook motherboards. SA8540P is an automotive SoC used in the
Qdrive-3 development platform
- Rockchips gains no new SoC variants, but a lot of new boards:
three mobile gaming systems based on RK3326 Odroid-Go/rg351 family,
two more Anbernic gaming systems based on RK3566 and a number of
other RK356x based single-board computers.
- Renesas RZ/G2UL (r9a07g043) was already supported for arm64, but as
the newly added RZ/Five is based on the same design, this now gets
reorganized in order to share most of the dts description between
the two and add the RZ/Five SMARC EVK board support.
Aside from that, there are the usual changes all over the tree:
- New boards on other platforms contain two ASpeed BMC users, two
Broadcom based Wifi routers, Zyxel NSA310S NAS, the i.MX6 based Kobo
Aura2 ebook reader, two i.MX8 based development boards, two Uniphier
Pro5 development boards, the STM32MP1 testbench board from DHCOR,
the TI K3 based BeagleBone AI-64 board, and the Mediatek Helio X10
based Sony Xperia M5 phone.
- The Starfive JH7100 source gets reorganized in order to support the
VisionFive V1 board.
- Minor updates and cleanups for Intel SoCFPGA, Marvell PXA168,
TI, ST, NXP, Apple, Broadcom, Juno, Marvell MVEBU, at91, nuvoton,
Tegra, Mediatek, Renesas, Hisilicon, Allwinner, Samsung, ux500,
spear, ... The treewide cleanups now have a lot of fixes for cache
nodes and other binding violoations.
- Somewhat larger sets of reworks for NVIDIA Tegra, Qualcomm
and Renesas platforms, adding a lot more on-chip device support
- A rework of the way that DTB overlays are built.
-----BEGIN PGP SIGNATURE-----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=WCFd
-----END PGP SIGNATURE-----
Merge tag 'soc-dt-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC DT updates from Arnd Bergmann:
"The devicetree changes contain exactly 1000 non-merge changesets,
including a number of new arm64 SoC variants from Qualcomm and Apple,
as well as the Renesas r9a07g043f/u chip in both arm64 and riscv
variants.
While we have occasionally merged support for non-arm SoCs in the
past, this is now the normal path for riscv devicetree files.
The most notable changes, by SoC platform, are:
- The Apple T6000 (M1 Pro), T6001 (M1 Max) and T6002 (M1 Ultra) chips
now have initial support. This is particularly nice as I am typing
this on a T6002 Mac Studio with only a small number of driver
patches.
- Qualcomm MSM8996 Pro (Snapdragon 821), SM6115 (Snapdragon 662),
SM4250 (Snapdragon 460), SM6375 (Snapdragon 695), SDM670
(Snapdragon 670), MSM8976 (Snapdragon 652) and MSM8956 (Snapdragon
650) are all mobile phone chips that are closely related to others
we already support.
Adding those helps support more phones and we add several models
from Sony (Xperia 10 IV, 5 IV, X, and X compact), OnePlus (One, 3,
3T, and Nord N100), Xiaomi (Poco F1, Mi6), Huawei (Watch) and
Google (Pixel 3a).
There are also new variants of the Herobrine and Trogdor chromebook
motherboards. SA8540P is an automotive SoC used in the Qdrive-3
development platform
- Rockchips gains no new SoC variants, but a lot of new boards: three
mobile gaming systems based on RK3326 Odroid-Go/rg351 family, two
more Anbernic gaming systems based on RK3566 and a number of other
RK356x based single-board computers.
- Renesas RZ/G2UL (r9a07g043) was already supported for arm64, but as
the newly added RZ/Five is based on the same design, this now gets
reorganized in order to share most of the dts description between
the two and add the RZ/Five SMARC EVK board support.
Aside from that, there are the usual changes all over the tree:
- New boards on other platforms contain two ASpeed BMC users, two
Broadcom based Wifi routers, Zyxel NSA310S NAS, the i.MX6 based
Kobo Aura2 ebook reader, two i.MX8 based development boards, two
Uniphier Pro5 development boards, the STM32MP1 testbench board from
DHCOR, the TI K3 based BeagleBone AI-64 board, and the Mediatek
Helio X10 based Sony Xperia M5 phone.
- The Starfive JH7100 source gets reorganized in order to support the
VisionFive V1 board.
- Minor updates and cleanups for Intel SoCFPGA, Marvell PXA168, TI,
ST, NXP, Apple, Broadcom, Juno, Marvell MVEBU, at91, nuvoton,
Tegra, Mediatek, Renesas, Hisilicon, Allwinner, Samsung, ux500,
spear, ... The treewide cleanups now have a lot of fixes for cache
nodes and other binding violoations.
- Somewhat larger sets of reworks for NVIDIA Tegra, Qualcomm and
Renesas platforms, adding a lot more on-chip device support
- A rework of the way that DTB overlays are built"
* tag 'soc-dt-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (979 commits)
arm64: dts: apple: t6002: Fix GPU power domains
arm64: dts: apple: t600x-pmgr: Fix search & replace typo
arm64: dts: apple: Add t8103 L1/L2 cache properties and nodes
arm64: dts: apple: Rename dart-sio* to sio-dart*
arch: arm64: apple: t600x: Use standard "iommu" node name
arch: arm64: apple: t8103: Use standard "iommu" node name
ARM: dts: socfpga: Fix pca9548 i2c-mux node name
dt-bindings: iio: adc: qcom,spmi-vadc: fix PM8350 define
dt-bindings: iio: adc: qcom,spmi-vadc: extend example
arm64: dts: qcom: sc8280xp: fix UFS DMA coherency
arm64: dts: qcom: sc7280: Add DT for sc7280-herobrine-zombie
arm64: dts: qcom: sm8250-sony-xperia-edo: fix no-mmc property for SDHCI
arm64: dts: qcom: sdm845-sony-xperia-tama: fix no-mmc property for SDHCI
arm64: dts: qcom: sda660-inforce-ifc6560: fix no-mmc property for SDHCI
arm64: dts: qcom: sa8155p-adp: fix no-mmc property for SDHCI
arm64: dts: qcom: qrb5165-rb: fix no-mmc property for SDHCI
arm64: dts: qcom: sm8450: align MMC node names with dtschema
arm64: dts: qcom: sc7180-trogdor: use generic node names
arm64: dts: qcom: sm8450-hdk: add sound support
arm64: dts: qcom: sm8450: add Soundwire and LPASS
...
Socinfo is extended with knowledge about MSM8956, MSM8976, SM6115,
SM4250, SM8150, SA8155 and SM8550.
Support for RSC v3, as found in SM8550 is added to the RPMH RSC driver.
Support for SM8550 and SM4250 ARC regulators are added to the RPM(h)
power-domain drivers. SM8550 support is added to the LLCC driver.
The AOSS QMP binding is declared compatible for SM8550.
BWMON and LLCC now selects REGMAP_MMIO to ensure dependencies are built
properly.
-----BEGIN PGP SIGNATURE-----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=MwgS
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=u7Q7
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-6.2-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
More Qualcomm driver updates for 6.2
Socinfo is extended with knowledge about MSM8956, MSM8976, SM6115,
SM4250, SM8150, SA8155 and SM8550.
Support for RSC v3, as found in SM8550 is added to the RPMH RSC driver.
Support for SM8550 and SM4250 ARC regulators are added to the RPM(h)
power-domain drivers. SM8550 support is added to the LLCC driver.
The AOSS QMP binding is declared compatible for SM8550.
BWMON and LLCC now selects REGMAP_MMIO to ensure dependencies are built
properly.
* tag 'qcom-drivers-for-6.2-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: socinfo: Add SM6115 / SM4250 SoC IDs to the soc_id table
dt-bindings: arm: qcom,ids: Add SoC IDs for SM6115 / SM4250 and variants
soc: qcom: socinfo: Add SM8150 and SA8155 SoC IDs to the soc_id table
dt-bindings: arm: qcom,ids: Add SoC IDs for SM8150 and SA8155
dt-bindings: soc: qcom: apr: document generic qcom,apr compatible
soc: qcom: Select REMAP_MMIO for ICC_BWMON driver
soc: qcom: Select REMAP_MMIO for LLCC driver
soc: qcom: rpmpd: Add SM4250 support
dt-bindings: power: rpmpd: Add SM4250 support
dt-bindings: soc: qcom: aoss: Add compatible for SM8550
soc: qcom: llcc: Add configuration data for SM8550
dt-bindings: arm: msm: Add LLCC compatible for SM8550
soc: qcom: llcc: Add v4.1 HW version support
soc: qcom: socinfo: Add SM8550 ID
soc: qcom: rpmh-rsc: Avoid unnecessary checks on irq-done response
soc: qcom: rpmh-rsc: Add support for RSC v3 register offsets
soc: qcom: rpmhpd: Add SM8550 power domains
dt-bindings: power: rpmpd: Add SM8550 to rpmpd binding
soc: qcom: socinfo: Add MSM8956/76 SoC IDs to the soc_id table
dt-bindings: arm: qcom,ids: Add SoC IDs for MSM8956 and MSM8976
Link: https://lore.kernel.org/r/20221207154134.3233779-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add compatible and constants for the power domains exposed by the
SM4250 RPM.
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Rajendra Nayak <rnayak@codeaurora.org>
Cc: Konrad Dybcio <konrad.dybcio@somainline.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221127112204.1486337-2-bhupesh.sharma@linaro.org
Add compatible and constants for the power domains exposed by the RPMH
in the Qualcomm SM8550 platform.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221116111745.2633074-2-abel.vesa@linaro.org
Document the identifier of MSM8956/76.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221111120156.48040-7-angelogioacchino.delregno@collabora.com
Add device tree bindings for global clock controller on SM8550 SoCs.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221130112852.2977816-2-abel.vesa@linaro.org
Add bindings for the missing networking resets found in IPQ8074 GCC.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221107132901.489240-2-robimarko@gmail.com
This introduces support for SM4250, SM6115, SM6375 and SDM670 platforms
and Sony Xperia 10 IV, Google Pixel 3a, OnePlus 3, OnePlus 3T, Google
Pazquel and OnePlus Nord N100.
A wide variety of updates to align with DeviceTree bindings across
many/most platforms is introduced, and incorrectly styled comments are
adjusted across the tree.
Apps RSC is added to the cluster-idle power-domain across SM8150,
SM8250, SM8350 and SM8450, to ensure sleep and wake votes are flushed as
the last core is being powered down.
Remoteproc firmware patches are aligned with agreed upon structure used
in linux-firmware across Inforce 6560, Lenovo Miix 630, various Sony
Xperia devices and Samsung Galaxy Book2 (although these are not
available in linux-firmware today).
On IPQ8074 CPU clocks are added, thermal zones are introduced and vqmmc
supply is specified for the HK01 board.
Alcatel OneTouch Idol 3 gains LED nodes and Samsung Galaxy A3U gained
vibrator support.
The application subsystem's IOMMU and the display subsystem is enabled
for MSM8953.
A new CPU frequency table is introduced for MSM8996Pro, to properly
describe it separate of MSM8996. The GPU opp-table is extended as well.
On SC7180 USB is marked as a wakeup source, USB gains required-opps to
ensure that the core voltage rail is voted for as needed. The
description of the fingerprint sensor in Trogdor is corrected.
On SC7280 Wake-on-WLAN is introduced, and PHY parameters for the SNPS
USB PHY is defined across SC7280.
The memory map across Google Herobrine is adjusted, to regain unused
memory on the WiFi SKUs. A LTE SKU of the Evoker board is introduced
and the bard gains touchscreen.
NVME support is disabled on Villager boards, as it's not used.
PCIe support is introduced on SC8280XP, with NVMe, SDX55 (5G) and WiFi
enabled on the Lenovo Thinkpad X13s and Compute Reference Device. ADCs
and thermal zones are intrduced for the same. Lenovo Thinkpad X13s
gains LID switch support.
Fairphone FP3 gains touchscreen support.
Support for Xiaomi Poco F1 variant with EBBG panel.
The round-robin ADC is enabled across DB845c, OnePlus devices and
Pocophone F1 devices.
The displayport controller on SDM845 is introduced.
SM6350 gains SDHCI support and on Sony Xperia 10 III sd-card,
touchscreen and GPI DMA is enabled.
Fairphone FP4 got SD-card support.
UFS PHY register ranges are corrected across SM8150, SM8250, SM8350 and
SM8450.
Sony Xperia 1 II got NFC support and Sony Xperia 5 III got PMIC
regulators defined and USB definition corrected, to enable USB3.
The SDHCI controller is described for SM8450 and microSD support is
enabled for the HDK and QRD devices.
SM8450 also gains camera CCI interface and display clock controller.
-----BEGIN PGP SIGNATURE-----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=0+lj
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=c209
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-for-6.2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm ARM64 DTS updates for 6.2
This introduces support for SM4250, SM6115, SM6375 and SDM670 platforms
and Sony Xperia 10 IV, Google Pixel 3a, OnePlus 3, OnePlus 3T, Google
Pazquel and OnePlus Nord N100.
A wide variety of updates to align with DeviceTree bindings across
many/most platforms is introduced, and incorrectly styled comments are
adjusted across the tree.
Apps RSC is added to the cluster-idle power-domain across SM8150,
SM8250, SM8350 and SM8450, to ensure sleep and wake votes are flushed as
the last core is being powered down.
Remoteproc firmware patches are aligned with agreed upon structure used
in linux-firmware across Inforce 6560, Lenovo Miix 630, various Sony
Xperia devices and Samsung Galaxy Book2 (although these are not
available in linux-firmware today).
On IPQ8074 CPU clocks are added, thermal zones are introduced and vqmmc
supply is specified for the HK01 board.
Alcatel OneTouch Idol 3 gains LED nodes and Samsung Galaxy A3U gained
vibrator support.
The application subsystem's IOMMU and the display subsystem is enabled
for MSM8953.
A new CPU frequency table is introduced for MSM8996Pro, to properly
describe it separate of MSM8996. The GPU opp-table is extended as well.
On SC7180 USB is marked as a wakeup source, USB gains required-opps to
ensure that the core voltage rail is voted for as needed. The
description of the fingerprint sensor in Trogdor is corrected.
On SC7280 Wake-on-WLAN is introduced, and PHY parameters for the SNPS
USB PHY is defined across SC7280.
The memory map across Google Herobrine is adjusted, to regain unused
memory on the WiFi SKUs. A LTE SKU of the Evoker board is introduced
and the bard gains touchscreen.
NVME support is disabled on Villager boards, as it's not used.
PCIe support is introduced on SC8280XP, with NVMe, SDX55 (5G) and WiFi
enabled on the Lenovo Thinkpad X13s and Compute Reference Device. ADCs
and thermal zones are intrduced for the same. Lenovo Thinkpad X13s
gains LID switch support.
Fairphone FP3 gains touchscreen support.
Support for Xiaomi Poco F1 variant with EBBG panel.
The round-robin ADC is enabled across DB845c, OnePlus devices and
Pocophone F1 devices.
The displayport controller on SDM845 is introduced.
SM6350 gains SDHCI support and on Sony Xperia 10 III sd-card,
touchscreen and GPI DMA is enabled.
Fairphone FP4 got SD-card support.
UFS PHY register ranges are corrected across SM8150, SM8250, SM8350 and
SM8450.
Sony Xperia 1 II got NFC support and Sony Xperia 5 III got PMIC
regulators defined and USB definition corrected, to enable USB3.
The SDHCI controller is described for SM8450 and microSD support is
enabled for the HDK and QRD devices.
SM8450 also gains camera CCI interface and display clock controller.
* tag 'qcom-arm64-for-6.2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (261 commits)
arm64: dts: qcom: sdm845-polaris: Don't duplicate DMA assignment
arm64: dts: qcom: sm8350-sagami: Wire up USB regulators and fix USB3
arm64: dts: qcom: sm8350-sagami: Add most RPMh regulators
arm64: dts: qcom: sc7280: Make herobrine-audio-rt5682 mic dtsi's match more
arm64: dts: qcom: trim addresses to 8 digits
arm64: dts: msm8998: unify PCIe clock order withMSM8996
arm64: dts: msm8998: add MSM8998 specific compatible
arm64: dts: qcom: sc8280xp-x13s: enable WiFi controller
arm64: dts: qcom: sc8280xp-x13s: enable modem
arm64: dts: qcom: sc8280xp-x13s: enable NVMe SSD
arm64: dts: qcom: sc8280xp-crd: enable WiFi controller
arm64: dts: qcom: sc8280xp-crd: enable SDX55 modem
arm64: dts: qcom: sc8280xp-crd: enable NVMe SSD
arm64: dts: qcom: sc8280xp-crd: rename backlight and misc regulators
arm64: dts: qcom: sa8295p-adp: enable PCIe
arm64: dts: qcom: sc8280xp/sa8540p: add PCIe2-4 nodes
arm64: dts: qcom: add sdm670 and pixel 3a device trees
arm64: dts: qcom: sc7280: Add Google Herobrine WIFI SKU dts fragment
arm64: dts: qcom: sc7280: Mark all Qualcomm reference boards as LTE
arm64: dts: qcom: sm7225-fairphone-fp4: Enable SD card
...
Link: https://lore.kernel.org/r/20221124100650.1982448-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
New boards:
- Model A and blade baseboards for the SOQuartz (rk3568) SoM,
- Anberic RG351M, RG353V, RG353VS; Odroid Go Super, Advance gaming devices
- Odroid M1
- Theobroma px30 SoM with baseboard
- Rockchip's own rk3566 demo board
Some core support for per SoC specifics:
- crypto support for rk3399 and rk3328
- second I2S controller for rk3568
- Cache properties for follow the binding for rk3308 and rk3328
Bigger device support updates for:
- SOQuartz: PCIe2, video output, gpu, HDMI sound
- Rock 3A: eth regulator, eth clock input, Wifi+Bt, I2S, PCIe3
As well as some minor extensions for Rock960 (hdmi supplies),
rk3566-roc-pc (PCIe2), Rock 4C+ (thermal support), Pinephone Pro (Wifi+Bt)
* tag 'v6.2-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (51 commits)
arm64: dts: rockchip: update cache properties for rk3308 and rk3328
arm64: dts: rockchip: Add SOQuartz Model A baseboard
dt-bindings: arm: rockchip: Add SOQuartz Model A
arm64: dts: rockchip: Add SOQuartz blade board
dt-bindings: arm: rockchip: Add SOQuartz Blade
arm64: dts: rockchip: Add Anbernic RG351M
arm64: dts: rockchip: Add Odroid Go Super
arm64: dts: rockchip: Add Odroid Go Advance Black Edition
dt-bindings: arm: rockchip: Add more RK3326 devices
arm64: dts: rockchip: Move most of Odroid Go Advance DTS into a DTSI
arm64: dts: rockchip: Add support of regulator for ethernet node on Rock 3A SBC
arm64: dts: rockchip: Add support of external clock to ethernet node on Rock 3A SBC
arm64: dts: rockchip: Add HDMI supplies on Rock960
arm64: dts: rockchip: Add dts for rockchip rk3566 box demo board
dt-bindings: rockchip: Add Rockchip rk3566 box demo board
arm64: dts: rockchip: Enable PCIe 2 on SOQuartz CM4IO
arm64: dts: rockchip: Enable HDMI sound on SOQuartz
arm64: dts: rockchip: Enable video output and HDMI on SOQuartz
arm64: dts: rockchip: Enable GPU on SOQuartz CM4
arm64: dts: rockchip: enable pcie2 on rk3566-roc-pc
...
Link: https://lore.kernel.org/r/4716610.aeNJFYEL58@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Unlike audio_pll1 and audio_pll2, there is no video_pll2. Further, the
name used in the RM is video_pll. So, let's rename "video_pll1" to
"video_pll" to be consistent with the RM and avoid misunderstandings.
The IMX8MN_VIDEO_PLL1* constants have not been removed to ensure
backward compatibility of the patch.
No functional changes intended.
Fixes: 96d6392b54dbb ("clk: imx: Add support for i.MX8MN clock driver")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Acked-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20221117113637.1978703-4-dario.binacchi@amarulasolutions.com
The IMX8MN platform does not have any video processing unit (VPU), and
indeed in the reference manual (document IMX8MNRM Rev 2, 07/2022) there
is no occurrence of its pll. From an analysis of the code and the RM
itself, I think vpu pll is used instead of m7 alternate pll, probably
for copy and paste of code taken from modules of similar architectures.
As an example for all, if we consider the second row of the "Clock Root"
table of chapter 5 (Clocks and Power Management) of the RM:
Clock Root offset Source Select (CCM_TARGET_ROOTn[MUX])
... ... ...
ARM_M7_CLK_ROOT 0x8080 000 - 24M_REF_CLK
001 - SYSTEM_PLL2_DIV5
010 - SYSTEM_PLL2_DIV4
011 - M7_ALT_PLL_CLK
100 - SYSTEM_PLL1_CLK
101 - AUDIO_PLL1_CLK
110 - VIDEO_PLL_CLK
111 - SYSTEM_PLL3_CLK
... ... ...
but in the source code, the imx8mn_m7_sels clocks list contains vpu_pll
for the source select bits 011b.
So, let's rename "vpu_pll" to "m7_alt_pll" to be consistent with the RM.
The IMX8MN_VPU_* constants have not been removed to ensure backward
compatibility of the patch.
No functional changes intended.
Fixes: 96d6392b54dbb ("clk: imx: Add support for i.MX8MN clock driver")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Acked-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20221117113637.1978703-2-dario.binacchi@amarulasolutions.com
Add a new dt-bindings/media/video-interfaces.h header that defines
macros corresponding to the bus types from media/video-interfaces.yaml.
This allows avoiding hardcoded constants in device tree sources.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The current QMP USB3-DP PHY bindings are based on the original MSM8996
binding which provided multiple PHYs per IP block and these in turn were
described by child nodes.
The QMP USB3-DP PHY block provides a single multi-protocol PHY and even
if some resources are only used by either the USB or DP part of the
device there is no real benefit in describing these resources in child
nodes.
The original MSM8996 binding also ended up describing the individual
register blocks as belonging to either the wrapper node or the PHY child
nodes.
This is an unnecessary level of detail which has lead to problems when
later IP blocks using different register layouts have been forced to fit
the original mould rather than updating the binding. The bindings are
arguable also incomplete as they only the describe register blocks used
by the current Linux drivers (e.g. does not include the PCS LANE
registers).
This is specifically true for later USB4-USB3-DP QMP PHYs where the TX
registers are used by both the USB3 and DP parts of the PHY (and where
the USB4 part of the PHY was not covered by the binding at all). Notably
there are also no DP "RX" (sic) registers as described by the current
bindings and the DP "PCS" region is really a set of DP_PHY registers.
Add a new binding for the USB4-USB3-DP QMP PHYs found on SC8280XP which
further bindings can be based on.
Note that the binding uses a PHY index to access either the USB3 or DP
part of the PHY and that this can later be used also for the USB4 part
if needed.
Similarly, the clock inputs and outputs can later be extended to support
USB4.
Also note that the current binding is simply removed instead of being
deprecated as it was only recently merged and would not allow for
supporting DP mode.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20221121085058.31213-3-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Qualcomm driver updates for 6.2
The qcom,msm-id and qcom,board-id DeviceTree properties are documented,
to allow them to be used in configurations or devices requiring these
and the socinfo driver is updated to reuse the introduced identifiers.
The rpmh-rsc driver is extended to register for PM runtime notifications
from the CPU clusters, in order to submit sleep and wake votes the last
core in a cluster is being powered down.
A mechanism for keeping rpmhpd resources voted until sync_state is
introduced, this ensures that power-domains required during boot are
kept enabled. The rpmhpd power-domains for SDM670 are also added.
Support for the new QDU1000/QRU1000 platform is introduced in the rpmhpd
and socinfo drivers.
The APR driver gains missing error handling. QMI message descriptors in
the PDR driver are made const.
Support for the RPM found in SM6375 is added. The SPM driver gains
support for MSM8939 and MSM8976 platforms.
The stats and command-db drvers are marked as not having PM support.
* tag 'qcom-drivers-for-6.2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (36 commits)
dt-bindings: firmware: scm: add sdm670 compatible
soc: qcom: rpmh-rsc: Write CONTROL_TCS with next timer wakeup
soc: qcom: rpmh-rsc: Save base address of drv
PM: domains: Store the next hrtimer wakeup in genpd
soc: qcom: rpmh-rsc: Attach RSC to cluster PM domain
dt-bindings: soc: qcom: Update devicetree binding document for rpmh-rsc
dt-bindings: soc: qcom: qcom,smd-rpm: Use qcom,smd-channels on MSM8976
soc: qcom: apr: Add check for idr_alloc and of_property_read_string_index
soc: qcom: socinfo: Add QDU1000/QRU1000 SoC IDs to the soc_id table
dt-bindings: arm: qcom,ids: Add SoC IDs for QDU1000/QRU1000
soc: qcom: rpmhpd: Add QDU1000/QRU1000 power domains
dt-bindings: power: rpmpd: Add QDU1000/QRU1000 to rpmpd binding
dt-bindings: qcom: smp2p: Add WPSS node names to pattern property
soc: qcom: spm: Implement support for SAWv2.3, MSM8976 L2 PM
dt-bindings: soc: qcom: spm: Add compatibles for MSM8976 L2
soc: qcom: llcc: make irq truly optional
soc: qcom: spm: Add MSM8939 SPM register data
dt-bindings: soc: qcom: spm: Add MSM8939 CPU compatible
dt-bindings: soc: qcom: aoss: Add sc8280xp compatible
dt-bindings: firmware: document Qualcomm SM6375 SCM
...
Link: https://lore.kernel.org/r/20221122202748.1854487-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
New memory client IDs and IOMMU stream IDs, as well as new compatible
strings are introduced to support more hardware on Tegra234. Some device
tree bindings are converted to json-schema to allow formal validation.
-----BEGIN PGP SIGNATURE-----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=Eawq
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=OUO0
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-6.2-dt-bindings-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
dt-bindings: Changes for v6.2-rc1
New memory client IDs and IOMMU stream IDs, as well as new compatible
strings are introduced to support more hardware on Tegra234. Some device
tree bindings are converted to json-schema to allow formal validation.
* tag 'tegra-for-6.2-dt-bindings-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: usb: tegra-xusb: Convert to json-schema
dt-bindings: pwm: tegra: Convert to json-schema
dt-bindings: pinctrl: tegra194: Separate instances
dt-bindings: pinctrl: tegra: Convert to json-schema
dt-bindings: PCI: tegra234: Add ECAM support
dt-bindings: pwm: tegra: Document Tegra234 PWM
dt-bindings: Add bindings for Tegra234 NVDEC
dt-bindings: tegra: Update headers for Tegra234
dt-bindings: Add headers for NVDEC on Tegra234
Link: https://lore.kernel.org/r/20221121171239.2041835-4-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
All these IDs are for one single HW gate (CCGR101) that is shared
between these root clocks.
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/1667811007-19222-2-git-send-email-shengjiu.wang@nxp.com
Per updated Reference Mannual, the TPM[1,3] LPIT[1,2] root clock entries
are reserved, it is because writing the CCM registers does nothing
because the TPM[1,3] and LPIT[1,2] IPs source from bus clk, not from the
TPM[1,3] LPIT[1,2] entries. And because there is no SW entity is using the
entries since adding them, let's drop them.
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20221028095211.2598312-4-peng.fan@oss.nxp.com
usb suspend clock has a gate shared with usb_root_clk.
Fixes: 9c140d9926761 ("clk: imx: Add support for i.MX8MP clock driver")
Cc: stable@vger.kernel.org # v5.19+
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/1664549663-20364-1-git-send-email-jun.li@nxp.com
Update the device-tree clock, memory, power and reset headers for
Tegra234 by adding the definitions for all the various devices.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
For some reason the mod clock for the Allwinner F1C100s CIR (infrared
receiver) peripheral was not modeled in the CCU driver.
Add the clock description to the list, and wire it up in the clock list.
By assigning a new clock ID at the end, it extends the number of clocks.
This allows to use the CIR peripheral on any F1C100s series board.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20221107005433.11079-5-andre.przywara@arm.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Add reset ID defines for rk3588.
Compared to the downstream bindings and previous rockchip
generations this uses continous gapless reset IDs starting
at 0 instead of register offsets as IDs. Thus all numbers
are different between upstream and downstream, but I kept
the names exactly the same.
Co-Developed-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20221018151407.63395-3-sebastian.reichel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add clock ID defines for rk3588.
Compared to the downstream bindings written by Elaine, this uses
continous gapless clock IDs starting at 0. Thus all numbers are
different between downstream and upstream, but I kept exactly the
same names.
Co-Developed-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20221018151407.63395-2-sebastian.reichel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Rename the header guard of mt6795-pinfunc.h from __DTS_MT8173_PINFUNC_H to
__DTS_MT6795_PINFUNC_H what corresponding with the file name.
Fixes: 81557a71564a ("dt-bindings: pinctrl: Add MediaTek MT6795 pinctrl bindings")
Signed-off-by: Wei Li <liwei391@huawei.com>
Link: https://lore.kernel.org/r/20221108094529.3597920-1-liwei391@huawei.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add compatible and constants for the power domains exposed by the RPMH
in the Qualcomm QDU1000 and QRU1000 platforms.
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221026190549.4005703-3-quic_molvera@quicinc.com
As per the new ADC7 architecture used by the Qualcomm PMICs, each PMIC
has the static Slave ID (SID) assigned by default. The primary PMIC
PMK8350 is responsible for collecting the temperature/voltage data from
the slave PMICs and exposing them via it's registers.
For getting the measurements from the slave PMICs, PMK8350 uses the
channel ID encoded with the SID of the relevant PMIC. So far, the
dt-binding for the slave PMIC PM8350 assumed that there will be only
one PM8350 in a system. So it harcoded SID 1 with channel IDs.
But this got changed in platforms such as Lenovo X13s where there are a
couple of PM8350 PMICs available. So to address multiple PM8350s, change
the binding to accept the SID specified by the user and use it for
encoding the channel ID.
It should be noted that, even though the SID is static it is not
globally unique. Only the primary PMIC has the unique SID id 0.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221103095810.64606-2-manivannan.sadhasivam@linaro.org
Add this previously missing index, since it is supported by the SoCs
targeted by the dispcc-sm8250 driver.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221102090140.965450-4-robert.foss@linaro.org
This will be used from the devicetree bindings to specify the clocks
that should be obtained from the jz4755-cgu driver.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Link: https://lore.kernel.org/r/20221027192024.484320-3-lis8215@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add bindings for audio-related clocks on the Ingenic X1000 SoC.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Link: https://lore.kernel.org/r/20221026194345.243007-5-aidanmacdonald.0x0@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
RK3399 has 2 crypto instance, named crypto0 and crypto1 in the TRM.
Only reset for crypto1 is correctly named, but crypto0 is not.
Since nobody use them, add a 0 to be consistent with the TRM and
crypto1 entries.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20220927075511.3147847-27-clabbe@baylibre.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add the RPMh power domain IDs and compatible string for Snapdragon 670 to
make SDM670 power domains accessible to the device trees.
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221004221130.14076-2-mailingradian@gmail.com
The top level qcom,msm-id and qcom,board-id properties are utilized by
bootloaders on Qualcomm MSM platforms to determine which device tree
should be used and passed to the kernel.
The commit b32e592d3c28 ("devicetree: bindings: Document qcom board
compatible format") from 2015 was a consensus during discussion about
upstreaming qcom,msm-id and qcom,board-id fields. There are however still
problems with that consensus:
1. It was reached 7 years ago but it turned out its implementation did
not reach all possible products.
2. Initially additional tool (dtbTool) was needed for parsing these
fields to create a QCDT image consisting of multiple DTBs, later the
bootloaders were improved and they use these qcom,msm-id and
qcom,board-id properties directly.
3. Extracting relevant information from the board compatible requires
this additional tool (dtbTool), which makes the build process more
complicated and not easily reproducible (DTBs are modified after the
kernel build).
4. Some versions of Qualcomm bootloaders expect these properties even
when booting with a single DTB. The community is stuck with these
bootloaders thus they require properties in the DTBs.
Since several upstreamed Qualcomm SoC-based boards require these
properties to properly boot and the properties are reportedly used by
bootloaders, document them along with the bindings header with constants
used by: bootloader, some DTS and socinfo driver.
Link: https://lore.kernel.org/r/a3c932d1-a102-ce18-deea-18cbbd05ecab@linaro.org/
Co-developed-by: Kumar Gala <galak@codeaurora.org>
Signed-off-by: Kumar Gala <galak@codeaurora.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220830065744.161163-2-krzysztof.kozlowski@linaro.org
