IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The notable changes are:
- New features and improvements:
- Configure interrupt affinity according to NUMA nodes for the MSI-X interrupts that are
assigned to the userspace application which acquires the device.
- Move the HBM MMU page tables to reside inside the HBM to minimize latency when doing
page-walks.
- Improve the device reset mechanism when consecutive heartbeat failures occur (firmware
fails to ack on heartbeat message).
- Check also extended errors in the PCIe addr_dec interrupt information.
- Rate limit the error messages that can be printed to dmesg log by userspace actions.
- Firmware related fixes:
- Handle requests from firmware to reserve device memory
- Bug fixes and code cleanups:
- constify the struct device_type usage in accel (accel_sysfs_device_minor).
- Fix the PCI health check by reading uncached register.
- Fix reporting of drain events.
- Fix debugfs files permissions.
- Fix calculation of DRAM BAR base address.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE7TEboABC71LctBLFZR1NuKta54AFAmXcSN4ACgkQZR1NuKta
54Cz1wf9F7e16PkqyJ3xow++s4Poj4uRbVxu4YVkRNtLKLmLbfcXal07QTJU08oL
wVGe9IaF1T1wDTqtTJsLKHO9iocSAFqlCiQkQ7v2DjKSdqjGShWGU8t/CDkq22F3
+MSQi6Zsgy3yUOppgXt7M2a7tD4pS/XyWyMs2E1NUzW2d0s9parlxdEknjX7dnAv
yYCsCvq5GGDt7q+TEaGySD8vU5ZP3bGG1hGtDstJ5Z2kbR4MHFS0Ms+dDNvjIPFW
Q5c/WtKIeAvbnsMOsF2JjqDRkyvaSrFyAyI3xqHQjXK65LK3F67BV1QOzlteJcdr
WSg5LnHwARi2REwlkj1PvcGDPYlSmA==
=mTWh
-----END PGP SIGNATURE-----
Merge tag 'drm-habanalabs-next-2024-02-26' of https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux into drm-next
This tag contains habanalabs driver and accel changes for v6.9.
The notable changes are:
- New features and improvements:
- Configure interrupt affinity according to NUMA nodes for the MSI-X interrupts that are
assigned to the userspace application which acquires the device.
- Move the HBM MMU page tables to reside inside the HBM to minimize latency when doing
page-walks.
- Improve the device reset mechanism when consecutive heartbeat failures occur (firmware
fails to ack on heartbeat message).
- Check also extended errors in the PCIe addr_dec interrupt information.
- Rate limit the error messages that can be printed to dmesg log by userspace actions.
- Firmware related fixes:
- Handle requests from firmware to reserve device memory
- Bug fixes and code cleanups:
- constify the struct device_type usage in accel (accel_sysfs_device_minor).
- Fix the PCI health check by reading uncached register.
- Fix reporting of drain events.
- Fix debugfs files permissions.
- Fix calculation of DRAM BAR base address.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Oded Gabbay <ogabbay@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/ZdxJprop0EniVQtf@ogabbay-vm-u22.habana-labs.com
UAPI Changes:
- New query to the GuC firmware submission version. (José Roberto de Souza)
- Remove unused persistent exec_queues (Thomas Hellström)
- Add vram frequency sysfs attributes (Sujaritha Sundaresan, Rodrigo Vivi)
- Add the flag XE_VM_BIND_FLAG_DUMPABLE to notify devcoredump that mapping
should be dumped (Maarten Lankhorst)
Cross-drivers Changes:
- Make sure intel_wakeref_t is treated as opaque type on i915-display
and fix its type on xe
Driver Changes:
- Drop pre-production workarounds (Matt Roper)
- Drop kunit tests for unsuported platforms: PVC and pre-production DG2 (Lucas De Marchi)
- Start pumbling SR-IOV support with memory based interrupts
for VF (Michal Wajdeczko)
- Allow to map BO in GGTT with PAT index corresponding to
XE_CACHE_UC to work with memory based interrupts (Michal Wajdeczko)
- Improve logging with GT-oriented drm_printers (Michal Wajdeczko)
- Add GuC Doorbells Manager as prep work SR-IOV during
VF provisioning ((Michal Wajdeczko)
- Refactor fake device handling in kunit integration ((Michal Wajdeczko)
- Implement additional workarounds for xe2 and MTL (Tejas Upadhyay,
Lucas De Marchi, Shekhar Chauhan, Karthik Poosa)
- Program a few registers according to perfomance guide spec for Xe2 (Shekhar Chauhan)
- Add error handling for non-blocking communication with GuC (Daniele Ceraolo Spurio)
- Fix remaining 32b build issues and enable it back (Lucas De Marchi)
- Fix build with CONFIG_DEBUG_FS=n (Jani Nikula)
- Fix warnings from GuC ABI headers (Matthew Brost)
- Introduce Relay Communication for SR-IOV for VF <-> GuC <-> PF (Michal Wajdeczko)
- Add mocs reset kunit (Ruthuvikas Ravikumar)
- Fix spellings (Colin Ian King)
- Disable mid-thread preemption when not properly supported by hardware (Nirmoy Das)
- Release mmap mappings on rpm suspend (Badal Nilawar)
- Fix BUG_ON on xe_exec by moving fence reservation to the validate stage (Matthew Auld)
- Fix xe_exec by reserving extra fence slot for CPU bind (Matthew Brost)
- Fix xe_exec with full long running exec queue, now returning
-EWOULDBLOCK to userspace (Matthew Brost)
- Fix CT irq handler when CT is disabled (Matthew Brost)
- Fix VM_BIND_OP_UNMAP_ALL without any bound vmas (Thomas Hellström)
- Fix missing __iomem annotations (Thomas Hellström)
- Fix exec queue priority handling with GuC (Brian Welty)
- Fix setting SLPC flag to GuC when it's not supported (Vinay Belgaumkar)
- Fix C6 disabling without SLPC (Matt Roper)
- Drop -Wstringop-overflow to fix build with GCC11 (Paul E. McKenney)
- Circumvent bogus -Wstringop-overflow in one case (Arnd Bergmann)
- Refactor exec_queue user extensions handling and fix USM attributes
being applied too late (Brian Welty)
- Use circ_buf head/tail convention (Matthew Brost)
- Fail build if circ_buf-related defines are modified with incompatible values
(Matthew Brost)
- Fix several error paths (Dan Carpenter)
- Fix CCS copy for small VRAM copy chunks (Thomas Hellström)
- Rework driver initialization order and paths to account for driver running
in VF mode (Michal Wajdeczko)
- Initialize GuC earlier during probe to handle driver in VF mode (Michał Winiarski)
- Fix migration use of MI_STORE_DATA_IMM to write PTEs (Matt Roper)
- Fix bounds checking in __xe_bo_placement_for_flags (Brian Welty)
- Drop display dependency on CONFIG_EXPERT (Jani Nikula)
- Do not hand-roll kstrdup when creating snapshot (Michal Wajdeczko)
- Stop creating one kunit module per kunit suite (Lucas De Marchi)
- Reduce scope and constify variables (Thomas Hellström, Jani Nikula, Michal Wajdeczko)
- Improve and document xe_guc_ct_send_recv() (Michal Wajdeczko)
- Add proxy communication between CSME and GSC uC (Daniele Ceraolo Spurio)
- Fix size calculation when writing pgtable (Fei Yang)
- Make sure cfb is page size aligned in stolen memory (Vinod Govindapillai)
- Stop printing guc log to dmesg when waiting for GuC fails (Rodrigo Vivi)
- Use XE_CACHE_WB instead of XE_CACHE_NONE for cpu coherency on migration
(Himal Prasad Ghimiray)
- Fix error path in xe_vm_create (Moti Haimovski)
- Fix warnings in doc generation (Thomas Hellström, Badal Nilawar)
- Improve devcoredump content for mesa debugging (José Roberto de Souza)
- Fix crash in trace_dma_fence_init() (José Roberto de Souza)
- Improve CT state change handling (Matthew Brost)
- Toggle USM support for Xe2 (Lucas De Marchi)
- Reduces code duplication to emit PIPE_CONTROL (José Roberto de Souza)
- Canonicalize addresses where needed for Xe2 and add to devcoredump
(José Roberto de Souza)
- Only allow 1 ufence per exec / bind IOCTL (Matthew Brost)
- Move all display code to display/ (Jani Nikula)
- Fix sparse warnings by correctly using annotations (Thomas Hellström)
- Warn on job timeouts instead of using asserts (Matt Roper)
- Prefix macros to avoid clashes with sparc (Matthew Brost)
- Fix -Walloc-size by subclassing instead of allocating size smaller than struct (Thomas Hellström)
- Add status check during gsc header readout (Suraj Kandpal)
- Fix infinite loop in vm_bind_ioctl_ops_unwind() (Matthew Brost)
- Fix fence refcounting (Matthew Brost)
- Fix picking incorrect userptr VMA (Matthew Brost)
- Fix USM on integrated by mapping both mem.kernel_bb_pool and usm.bb_pool (Matthew Brost)
- Fix double initialization of display power domains (Xiaoming Wang)
- Check expected uC versions by major.minor.patch instead of just major.minor (John Harrison)
- Bump minimum GuC version to 70.19.2 for all platforms under force-probe
(John Harrison)
- Add GuC firmware loading for Lunar Lake (John Harrison)
- Use kzalloc() instead of hand-rolled alloc + memset (Nirmoy Das)
- Fix max page size of VMA during a REMAP (Matthew Brost)
- Don't ignore error when pinning pages in kthread (Matthew Auld)
- Refactor xe hwmon (Karthik Poosa)
- Add debug logs for D3cold (Riana Tauro)
- Remove broken TEST_VM_ASYNC_OPS_ERROR (Matthew Brost)
- Always allow to override firmware blob with module param and improve
log when no firmware is found (Lucas De Marchi)
- Fix shift-out-of-bounds due to xe_vm_prepare_vma() accepting zero fences (Thomas Hellström)
- Fix shift-out-of-bounds by distinguishing xe_pt/xe_pt_dir subclass (Thomas Hellström)
- Fail driver bind if platform supports MSIX, but fails to allocate all of them (Dani Liberman)
- Fix intel_fbdev thinking memory is backed by shmem (Matthew Auld)
- Prefer drm_dbg() over dev_dbg() (Jani Nikula)
- Avoid function cast warnings with clang-16 (Arnd Bergmann)
- Enhance xe_bo_move trace (Priyanka Dandamudi)
- Fix xe_vma_set_pte_size() not setting the right gpuva.flags for 4K size (Matthew Brost)
- Add XE_VMA_PTE_64K VMA flag (Matthew Brost)
- Return 2MB page size for compact 64k PTEs (Matthew Brost)
- Remove usage of the deprecated ida_simple_xx() API (Christophe JAILLET)
- Fix modpost warning on xe_mocs live kunit module (Ashutosh Dixit)
- Drop extra newline in from sysfs files (Ashutosh Dixit)
- Implement VM snapshot support for BO's and userptr (Maarten Lankhorst)
- Add debug logs when skipping rebinds (Matthew Brost)
- Fix code generation when mixing build directories (Dafna Hirschfeld)
- Prefer struct_size over open coded arithmetic (Erick Archer)
-----BEGIN PGP SIGNATURE-----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=nLHY
-----END PGP SIGNATURE-----
Merge tag 'drm-xe-next-2024-02-25' of ssh://gitlab.freedesktop.org/drm/xe/kernel into drm-next
drm/xe feature pull for v6.9:
UAPI Changes:
- New query to the GuC firmware submission version. (José Roberto de Souza)
- Remove unused persistent exec_queues (Thomas Hellström)
- Add vram frequency sysfs attributes (Sujaritha Sundaresan, Rodrigo Vivi)
- Add the flag XE_VM_BIND_FLAG_DUMPABLE to notify devcoredump that mapping
should be dumped (Maarten Lankhorst)
Cross-drivers Changes:
- Make sure intel_wakeref_t is treated as opaque type on i915-display
and fix its type on xe
Driver Changes:
- Drop pre-production workarounds (Matt Roper)
- Drop kunit tests for unsuported platforms: PVC and pre-production DG2 (Lucas De Marchi)
- Start pumbling SR-IOV support with memory based interrupts
for VF (Michal Wajdeczko)
- Allow to map BO in GGTT with PAT index corresponding to
XE_CACHE_UC to work with memory based interrupts (Michal Wajdeczko)
- Improve logging with GT-oriented drm_printers (Michal Wajdeczko)
- Add GuC Doorbells Manager as prep work SR-IOV during
VF provisioning ((Michal Wajdeczko)
- Refactor fake device handling in kunit integration ((Michal Wajdeczko)
- Implement additional workarounds for xe2 and MTL (Tejas Upadhyay,
Lucas De Marchi, Shekhar Chauhan, Karthik Poosa)
- Program a few registers according to perfomance guide spec for Xe2 (Shekhar Chauhan)
- Add error handling for non-blocking communication with GuC (Daniele Ceraolo Spurio)
- Fix remaining 32b build issues and enable it back (Lucas De Marchi)
- Fix build with CONFIG_DEBUG_FS=n (Jani Nikula)
- Fix warnings from GuC ABI headers (Matthew Brost)
- Introduce Relay Communication for SR-IOV for VF <-> GuC <-> PF (Michal Wajdeczko)
- Add mocs reset kunit (Ruthuvikas Ravikumar)
- Fix spellings (Colin Ian King)
- Disable mid-thread preemption when not properly supported by hardware (Nirmoy Das)
- Release mmap mappings on rpm suspend (Badal Nilawar)
- Fix BUG_ON on xe_exec by moving fence reservation to the validate stage (Matthew Auld)
- Fix xe_exec by reserving extra fence slot for CPU bind (Matthew Brost)
- Fix xe_exec with full long running exec queue, now returning
-EWOULDBLOCK to userspace (Matthew Brost)
- Fix CT irq handler when CT is disabled (Matthew Brost)
- Fix VM_BIND_OP_UNMAP_ALL without any bound vmas (Thomas Hellström)
- Fix missing __iomem annotations (Thomas Hellström)
- Fix exec queue priority handling with GuC (Brian Welty)
- Fix setting SLPC flag to GuC when it's not supported (Vinay Belgaumkar)
- Fix C6 disabling without SLPC (Matt Roper)
- Drop -Wstringop-overflow to fix build with GCC11 (Paul E. McKenney)
- Circumvent bogus -Wstringop-overflow in one case (Arnd Bergmann)
- Refactor exec_queue user extensions handling and fix USM attributes
being applied too late (Brian Welty)
- Use circ_buf head/tail convention (Matthew Brost)
- Fail build if circ_buf-related defines are modified with incompatible values
(Matthew Brost)
- Fix several error paths (Dan Carpenter)
- Fix CCS copy for small VRAM copy chunks (Thomas Hellström)
- Rework driver initialization order and paths to account for driver running
in VF mode (Michal Wajdeczko)
- Initialize GuC earlier during probe to handle driver in VF mode (Michał Winiarski)
- Fix migration use of MI_STORE_DATA_IMM to write PTEs (Matt Roper)
- Fix bounds checking in __xe_bo_placement_for_flags (Brian Welty)
- Drop display dependency on CONFIG_EXPERT (Jani Nikula)
- Do not hand-roll kstrdup when creating snapshot (Michal Wajdeczko)
- Stop creating one kunit module per kunit suite (Lucas De Marchi)
- Reduce scope and constify variables (Thomas Hellström, Jani Nikula, Michal Wajdeczko)
- Improve and document xe_guc_ct_send_recv() (Michal Wajdeczko)
- Add proxy communication between CSME and GSC uC (Daniele Ceraolo Spurio)
- Fix size calculation when writing pgtable (Fei Yang)
- Make sure cfb is page size aligned in stolen memory (Vinod Govindapillai)
- Stop printing guc log to dmesg when waiting for GuC fails (Rodrigo Vivi)
- Use XE_CACHE_WB instead of XE_CACHE_NONE for cpu coherency on migration
(Himal Prasad Ghimiray)
- Fix error path in xe_vm_create (Moti Haimovski)
- Fix warnings in doc generation (Thomas Hellström, Badal Nilawar)
- Improve devcoredump content for mesa debugging (José Roberto de Souza)
- Fix crash in trace_dma_fence_init() (José Roberto de Souza)
- Improve CT state change handling (Matthew Brost)
- Toggle USM support for Xe2 (Lucas De Marchi)
- Reduces code duplication to emit PIPE_CONTROL (José Roberto de Souza)
- Canonicalize addresses where needed for Xe2 and add to devcoredump
(José Roberto de Souza)
- Only allow 1 ufence per exec / bind IOCTL (Matthew Brost)
- Move all display code to display/ (Jani Nikula)
- Fix sparse warnings by correctly using annotations (Thomas Hellström)
- Warn on job timeouts instead of using asserts (Matt Roper)
- Prefix macros to avoid clashes with sparc (Matthew Brost)
- Fix -Walloc-size by subclassing instead of allocating size smaller than struct (Thomas Hellström)
- Add status check during gsc header readout (Suraj Kandpal)
- Fix infinite loop in vm_bind_ioctl_ops_unwind() (Matthew Brost)
- Fix fence refcounting (Matthew Brost)
- Fix picking incorrect userptr VMA (Matthew Brost)
- Fix USM on integrated by mapping both mem.kernel_bb_pool and usm.bb_pool (Matthew Brost)
- Fix double initialization of display power domains (Xiaoming Wang)
- Check expected uC versions by major.minor.patch instead of just major.minor (John Harrison)
- Bump minimum GuC version to 70.19.2 for all platforms under force-probe
(John Harrison)
- Add GuC firmware loading for Lunar Lake (John Harrison)
- Use kzalloc() instead of hand-rolled alloc + memset (Nirmoy Das)
- Fix max page size of VMA during a REMAP (Matthew Brost)
- Don't ignore error when pinning pages in kthread (Matthew Auld)
- Refactor xe hwmon (Karthik Poosa)
- Add debug logs for D3cold (Riana Tauro)
- Remove broken TEST_VM_ASYNC_OPS_ERROR (Matthew Brost)
- Always allow to override firmware blob with module param and improve
log when no firmware is found (Lucas De Marchi)
- Fix shift-out-of-bounds due to xe_vm_prepare_vma() accepting zero fences (Thomas Hellström)
- Fix shift-out-of-bounds by distinguishing xe_pt/xe_pt_dir subclass (Thomas Hellström)
- Fail driver bind if platform supports MSIX, but fails to allocate all of them (Dani Liberman)
- Fix intel_fbdev thinking memory is backed by shmem (Matthew Auld)
- Prefer drm_dbg() over dev_dbg() (Jani Nikula)
- Avoid function cast warnings with clang-16 (Arnd Bergmann)
- Enhance xe_bo_move trace (Priyanka Dandamudi)
- Fix xe_vma_set_pte_size() not setting the right gpuva.flags for 4K size (Matthew Brost)
- Add XE_VMA_PTE_64K VMA flag (Matthew Brost)
- Return 2MB page size for compact 64k PTEs (Matthew Brost)
- Remove usage of the deprecated ida_simple_xx() API (Christophe JAILLET)
- Fix modpost warning on xe_mocs live kunit module (Ashutosh Dixit)
- Drop extra newline in from sysfs files (Ashutosh Dixit)
- Implement VM snapshot support for BO's and userptr (Maarten Lankhorst)
- Add debug logs when skipping rebinds (Matthew Brost)
- Fix code generation when mixing build directories (Dafna Hirschfeld)
- Prefer struct_size over open coded arithmetic (Erick Archer)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/dbdkrwmcoqqlwftuc3olbauazc3pbamj26wa34puztowsnauoh@i3zms7ut4yuw
UAPI Changes:
- changes to fdinfo stats
Cross-subsystem Changes:
agp:
- remove unused type field from struct agp_bridge_data
Core Changes:
ci:
- update test names
- cleanups
gem:
- add stats for shared buffers plus updates to amdgpu, i915, xe
Documentation:
- fixes
syncobj:
- fixes to waiting and sleeping
Driver Changes:
bridge:
- adv7511: fix crash on irq during probe
- dw_hdmi: set bridge type
host1x:
- cleanups
ivpu:
- updates to firmware API
- refactor BO allocation
meson:
- fix error handling in probe
panel:
- revert "drm/panel-edp: Add auo_b116xa3_mode"
- add Himax HX83112A plus DT bindings
- ltk500hd1829: add support for ltk101b4029w and admatec 9904370
- simple: add BOE BP082WX1-100 8.2" panel plus DT bindungs
renesas:
- add RZ/G2L DU support plus DT bindings
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEchf7rIzpz2NEoWjlaA3BHVMLeiMFAmXXUhsACgkQaA3BHVML
eiNVFQf+IoOXCACGkWEVmVaen50pjEfLq0OjSGHdbTJqhc9wU7Q/kPC+jEpZLyqo
OUMdXlA55BeLX52O+bvLordDPNETUsYH1QX2BYKDwcNIrvj8ISXcvdbnDcbVmttD
ZUaaBgZ0g2M6sZQvTVU88/1RtaG64+zuk9VA1dPlh6WnBtXBUeXNtD6YQjH6xY+a
MjZpB5VafwJTmQxy7qJ4yTLX291Ao8J2YZK8cCSyEr3FQKkAx9sJyp3hPurVIjLM
f1y1rtoHhxUV/OVg4M559fp6F6tUkFauv4qu5VUvmPPihJTaU0eSQxir0za4VJ4e
Jr2GOkju0oRRpKfjd0aKvaoWhl+MNg==
=aaTQ
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2024-02-22' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v6.9:
UAPI Changes:
- changes to fdinfo stats
Cross-subsystem Changes:
agp:
- remove unused type field from struct agp_bridge_data
Core Changes:
ci:
- update test names
- cleanups
gem:
- add stats for shared buffers plus updates to amdgpu, i915, xe
Documentation:
- fixes
syncobj:
- fixes to waiting and sleeping
Driver Changes:
bridge:
- adv7511: fix crash on irq during probe
- dw_hdmi: set bridge type
host1x:
- cleanups
ivpu:
- updates to firmware API
- refactor BO allocation
meson:
- fix error handling in probe
panel:
- revert "drm/panel-edp: Add auo_b116xa3_mode"
- add Himax HX83112A plus DT bindings
- ltk500hd1829: add support for ltk101b4029w and admatec 9904370
- simple: add BOE BP082WX1-100 8.2" panel plus DT bindungs
renesas:
- add RZ/G2L DU support plus DT bindings
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240222135841.GA6677@localhost.localdomain
Since commit aed65af1cc2f ("drivers: make device_type const"), the driver
core can properly handle constant struct device_type. Move the
accel_sysfs_device_minor variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Today we read PCI VENDOR-ID in order to make sure PCI link is
healthy. Apparently the VENDOR-ID might be stored on host and
hence, when we read it we might not access the PCI bus.
In order to make sure PCI health check is reliable, we will start
checking the DEVICE-ID instead.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The reserved memory for FW is currently saved in an ASIC property in
units of MB, just like the value that comes from FW.
Except the fact that it is not clear from the property's name, it means
also that a calculation to actual size is required everywhere that it is
used.
Modify the property to hold the size in bytes.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Currently the reserved memory request from FW is handled when running
with preboot only, but this request is relevant also when running with
full FW.
Modify to always handle this reservation request.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Fetching sensor data can fail due to various reasons. In order
not to pollute the kernel log, those error prints must be
rate limited.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Due to a H/W issue, AXI drain event does not include a read/write
indication, hence we remove this print.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The unmasking is for event and it can be other event than RAZWI.
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
debugfs files are created with permissions that don't align
with the access requirements.
Signed-off-by: Avri Kehat <akehat@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The glbl error cause handling has a wrong assumption that all error
bits are consecutive.
Fix the handling to check all relevant error bits per ASIC.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The FW interrupt info for a PCIe addr_dec event is set correctly, so
check for either global errors or razwi according to the indications
there.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Skip loading a linux FW image into the device with the current supported
ASICs is done for test purposes only.
Moreover, for future supported ASICs it is possible that there won't be
a need to load such an image.
The print in such a case is therefore not needed in most cases, so
replace the used dev_info() with dev_dbg().
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The hop size related properties is a MMU properties and not
asic properties.
As for PMMU and HMMU we could have different sizes.
Signed-off-by: Farah Kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
As noted in the "Deprecated Interfaces, Language Features, Attributes,
and Conventions" documentation [1], size calculations (especially
multiplication) should not be performed in memory allocator (or similar)
function arguments due to the risk of them overflowing. This could lead
to values wrapping around and a smaller allocation being made than the
caller was expecting. Using those allocations could lead to linear
overflows of heap memory and other misbehaviors.
So, use the purpose specific kcalloc() function instead of the argument
size * count in the kzalloc() function.
Link: https://www.kernel.org/doc/html/next/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments [1]
Link: https://github.com/KSPP/linux/issues/162
Signed-off-by: Erick Archer <erick.archer@gmx.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The pointer input is assigned a value that is not read, it is
being re-assigned again later with the same value. Resolve this
by moving the declaration to input into the if block.
Cleans up clang scan build warning:
warning: Value stored to 'input' during its initialization is never
read [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@intel.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In newer kernel versions, irq_set_affinity_hint() is deprecated.
Instead, use the newer version which is irq_set_affinity_and_hint().
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The coding style in the Linux kernel prefers not to use
braces for single-statement if conditions.
This patch removes the unnecessary braces from an if statement
in the file drivers/accel/habanalabs/common/command_submission.c,
which also resolves a coding style warning.
Signed-off-by: Malkoot Khan <engr.mkhan1990@gmail.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Currently the HMMU page tables reside in the host memory,
which will cause host access from the device for every page walk.
This can affect PCIe bandwidth in certain scenarios.
To prevent that problem, HMMU page tables will be moved to the device
memory so the miss transaction will read the hops from there instead of
going to the host.
Signed-off-by: Farah Kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The mechanism of aborting device reset for consecutive fatal errors is
currently only for fatal errors that are reported by FW.
A non-responsive FW and consecutive heartbeat failures is also
considered fatal, so add them as well to this mechanism to avoid
recurring device reset in such a case.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
When the DRAM region size in the BAR is not a power of 2, calculating
the corresponding BAR base address should be done using the offset from
the DRAM start address, and not using directly the DRAM address.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Fix a warning of a buffer overflow:
‘snprintf’ output between 38 and 47 bytes into a destination of size 32
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
User interrupts are MSIx interrupts coming from Gaudi2, that have
specific range of IDs and are assigned to the sole use of the user
process that opened the Gaudi2 device (reminder: there can be only
a single user process running on Gaudi2 at any given time).
The interrupts are allocated and managed by the driver and therefore,
the user expects the driver to initialize them properly, which also
includes setting the affinity to the related CPU cores of the
device's NUMA node to get maximum performance.
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Commit a0df2cc858c3 ("drm/xe/xe_bo_move: Enhance xe_bo_move trace")
inadvertently reverted commit 8d038f49c1f3 ("drm/xe: Fix cast on trace
variable"), breaking the build on 32bits.
As noted by Ville, there's no point in converting the pointers to u64
and add casts everywhere. In fact, it's better to just use %p and let
the address be hashed. Convert all the cases in xe_trace.h to use
pointers.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Priyanka Dandamudi <priyanka.dandamudi@intel.com>
Cc: Oak Zeng <oak.zeng@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240222144125.2862546-1-lucas.demarchi@intel.com
If either the DRM_SYNCOBJ_WAIT_FLAGS_WAIT_FOR_SUBMIT or
DRM_SYNCOBJ_WAIT_FLAGS_WAIT_AVAILABLE flags are passed to
drm_syncobj_array_wait_timeout, the function might sleep if the fence at
one of the given timeline points has not yet been submitted. Therefore,
we should call might_sleep in that case to catch potential bugs.
Signed-off-by: Erik Kurzinger <ekurzinger@nvidia.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Simon Ser <contact@emersion.fr>
Link: https://patchwork.freedesktop.org/patch/msgid/20240119163208.3723457-3-ekurzinger@nvidia.com
The only flag that is meaningful to drm_syncobj_find_fence is
DRM_SYNCOBJ_WAIT_FLAGS_WAIT_FOR_SUBMIT. It should return -EINVAL for any
other flag bits.
Signed-off-by: Erik Kurzinger <ekurzinger@nvidia.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Simon Ser <contact@emersion.fr>
Link: https://patchwork.freedesktop.org/patch/msgid/20240119163208.3723457-2-ekurzinger@nvidia.com
When waiting for a syncobj timeline point whose fence has not yet been
submitted with the WAIT_FOR_SUBMIT flag, a callback is registered using
drm_syncobj_fence_add_wait and the thread is put to sleep until the
timeout expires. If the fence is submitted before then,
drm_syncobj_add_point will wake up the sleeping thread immediately which
will proceed to wait for the fence to be signaled.
However, if the WAIT_AVAILABLE flag is used instead,
drm_syncobj_fence_add_wait won't get called, meaning the waiting thread
will always sleep for the full timeout duration, even if the fence gets
submitted earlier. If it turns out that the fence *has* been submitted
by the time it eventually wakes up, it will still indicate to userspace
that the wait completed successfully (it won't return -ETIME), but it
will have taken much longer than it should have.
To fix this, we must call drm_syncobj_fence_add_wait if *either* the
WAIT_FOR_SUBMIT flag or the WAIT_AVAILABLE flag is set. The only
difference being that with WAIT_FOR_SUBMIT we will also wait for the
fence to be signaled after it has been submitted while with
WAIT_AVAILABLE we will return immediately.
IGT test patch: https://lists.freedesktop.org/archives/igt-dev/2024-January/067537.html
v1 -> v2: adjust lockdep_assert_none_held_once condition
Fixes: 01d6c3578379 ("drm/syncobj: add support for timeline point wait v8")
Signed-off-by: Erik Kurzinger <ekurzinger@nvidia.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Simon Ser <contact@emersion.fr>
Link: https://patchwork.freedesktop.org/patch/msgid/20240119163208.3723457-1-ekurzinger@nvidia.com
The generated file 'generated/xe_wa_oob.h' is included using:
"generated/xe_wa_oob.h"
which first look inside the source code. But the file resides
in the build directory and should therefore be included using:
<generated/xe_wa_oob.h>
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240221083622.1584492-1-dhirschfeld@habana.ai
Since we cannot immediately capture the BO's and userptr, perform it in
2 stages. The immediate stage takes a reference to each BO and userptr,
while a delayed worker captures the contents and then frees the
reference.
This is required because in signaling context, no locks can be taken, no
memory can be allocated, and no waits on userspace can be performed.
With the delayed worker, all of this can be performed very easily,
without having to resort to hacks.
Changes since v1:
- Fix crash on NULL captured vm.
- Use ascii85_encode to capture BO contents and save some space.
- Add length to coredump output for each captured area.
Changes since v2:
- Dump each mapping on their own line, to simplify tooling.
- Fix null pointer deref in xe_vm_snapshot_free.
Changes since v3:
- Don't add uninitialized value to snap->ofs. (Souza)
- Use kernel types for u32 and u64.
- Move snap_mutex destruction to final vm destruction. (Souza)
Changes since v4:
- Remove extra memset. (Souza)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240221133024.898315-6-maarten.lankhorst@linux.intel.com
The devcoredump is done in fence signaling context. Because of this, we
cannot take any of the normal mutexes or we would invert.
Normal: Take vm->lock, dma_fence_wait()
Devcoredump: from dma_fence_wait() context, take vm->lock.
This doesn't work, and we only care about integrity, so take the locks
around additions and removals of vma's.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240221133024.898315-5-maarten.lankhorst@linux.intel.com
Add the flag XE_VM_BIND_FLAG_DUMPABLE to notify devcoredump that this
mapping should be dumped.
This is not hooked up, but the uapi should be ready before merging.
It's likely easier to dump the contents of the bo's at devcoredump
readout time, so it's better if the bos will stay unmodified after
a hang. The NEEDS_CPU_MAPPING flag is removed as requirement.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240221133024.898315-3-maarten.lankhorst@linux.intel.com
Create entry for Renesas RZ DRM drivers and add my self as a maintainer.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20240218164840.57662-6-biju.das.jz@bp.renesas.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The rcar-du has never been maintained in drm-misc. So exclude only
this driver from drm-misc. Also, add the tree entry for sh_mobile.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> # shmob_drm
Link: https://lore.kernel.org/r/20240218164840.57662-5-biju.das.jz@bp.renesas.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The LCD controller is composed of Frame Compression Processor (FCPVD),
Video Signal Processor (VSPD), and Display Unit (DU).
It has DPI/DSI interfaces and supports a maximum resolution of 1080p
along with 2 RPFs to support the blending of two picture layers and
raster operations (ROPs).
The DU module is connected to VSPD. Add RZ/G2L DU support for RZ/G2L
alike SoCs.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20240218164840.57662-4-biju.das.jz@bp.renesas.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Document DU found in RZ/V2L SoC. The DU block is identical to RZ/G2L
SoC and therefore use RZ/G2L fallback to avoid any driver changes.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240218164840.57662-3-biju.das.jz@bp.renesas.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The RZ/G2L LCD controller is composed of Frame Compression Processor
(FCPVD), Video Signal Processor (VSPD), and Display Unit (DU).
The DU module supports the following hardware features
− Display Parallel Interface (DPI) and MIPI LINK Video Interface
− Display timing master
− Generates video timings
− Selecting the polarity of output DCLK, HSYNC, VSYNC, and DE
− Supports Progressive
− Input data format (from VSPD): RGB888, RGB666
− Output data format: same as Input data format
− Supporting Full HD (1920 pixels x 1080 lines) for MIPI-DSI Output
− Supporting WXGA (1280 pixels x 800 lines) for Parallel Output
This patch documents the DU module found on RZ/G2L LCDC.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20240218164840.57662-2-biju.das.jz@bp.renesas.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Moved IRQ registration down to end of adv7511_probe().
If an IRQ already is pending during adv7511_probe
(before adv7511_cec_init) then cec_received_msg_ts
could crash using uninitialized data:
Unable to handle kernel read from unreadable memory at virtual address 00000000000003d5
Internal error: Oops: 96000004 [#1] PREEMPT_RT SMP
Call trace:
cec_received_msg_ts+0x48/0x990 [cec]
adv7511_cec_irq_process+0x1cc/0x308 [adv7511]
adv7511_irq_process+0xd8/0x120 [adv7511]
adv7511_irq_handler+0x1c/0x30 [adv7511]
irq_thread_fn+0x30/0xa0
irq_thread+0x14c/0x238
kthread+0x190/0x1a8
Fixes: 3b1b975003e4 ("drm: adv7511/33: add HDMI CEC support")
Signed-off-by: Mads Bligaard Nielsen <bli@bang-olufsen.dk>
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240219-adv7511-cec-irq-crash-fix-v2-1-245e53c4b96f@bang-olufsen.dk
Newline in name is redunant and produces an unnecessary empty line during
'cat name'. Newline is added during sysfs_emit. See '27a1a1e2e47d ("drm/xe:
stringify the argument to avoid potential vulnerability")'.
v2: Add Fixes tag (Riana)
Fixes: 7b076d14f21a ("drm/xe/mtl: Add support to get C6 residency/status of MTL")
Reviewed-by: Riana Tauro <riana.tauro@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
ida_alloc() and ida_free() should be preferred to the deprecated
ida_simple_get() and ida_simple_remove().
Note that the upper limit of ida_simple_get() is exclusive, but the one of
ida_alloc_max() is inclusive. So a -1 has been added when needed.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/d6a9ec9dc426fca372eaa1423a83632bd743c5d9.1705244938.git.christophe.jaillet@wanadoo.fr
