IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The probe function enables the TRNG hardware before registering the
driver. If registration fails, probe returns an error, but the TRNG
remains enabled.
Define init and cleanup functions, enable and disable the hardware there.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use devm_clk_get_enabled in the pic32 driver. Ensure that the clock is
enabled as long as the driver is registered with the hwrng core.
Fixes: 7ea39973d1 ("hwrng: pic32 - Use device-managed registration API")
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Enable compile testing for the pic32 driver.
Remove the dependency on HW_RANDOM. The pic32 config section is under
"if HW_RANDOM".
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
SIMPLE_DEV_PM_OPS is deprecated, replace it with DEFINE_SIMPLE_DEV_PM_OPS
and use pm_sleep_ptr for setting the driver's pm routines. We can now
remove the __maybe_unused qualifier in the suspend and resume functions.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Mark UWORD_CPYBUF_SIZE with U suffix to make its type the same
with words_num. Then replace the if statement with min() in
qat_uclo_wr_uimage_raw_page() to make code shorter.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: You Kangren <youkangren@vivo.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use dev_err_probe to print a message and return an error. This makes the
code a tiny bit shorter.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The nomadik driver uses devres to register itself with the hwrng core,
the driver will be unregistered from hwrng when its device goes out of
scope. This happens after the driver's remove function is called.
However, nomadik's clock is disabled in the remove function. There's a
short timeframe where nomadik is still registered with the hwrng core
although its clock is disabled. I suppose the clock must be active to
access the hardware and serve requests from the hwrng core.
Switch to devm_clk_get_enabled and let devres disable the clock and
unregister the hwrng. This avoids the race condition.
Fixes: 3e75241be8 ("hwrng: drivers - Use device-managed registration API")
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
A firmware update for QAT GEN2 changed the format of a data
structure used to report the heartbeat counters.
To support all firmware versions, extend the heartbeat logic
with an algorithm that detects the number of counters returned
by firmware. The algorithm detects the number of counters to
be used (and size of the corresponding data structure) by the
comparison the expected size of the data in memory, with the data
which was written by the firmware.
Firmware detection is done one time during the first read of heartbeat
debugfs file to avoid increasing the time needed to load the module.
Signed-off-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Under some circumstances, firmware in the QAT devices could become
unresponsive. The Heartbeat feature provides a mechanism to detect
unresponsive devices.
The QAT FW periodically writes to memory a set of counters that allow
to detect the liveness of a device. This patch adds logic to enable
the reporting of those counters, analyze them and report if a device
is alive or not.
In particular this adds
(1) heartbeat enabling, reading and detection logic
(2) reporting of heartbeat status and configuration via debugfs
(3) documentation for the newly created sysfs entries
(4) configuration of FW settings related to heartbeat, e.g. tick period
(5) logic to convert time in ms (provided by the user) to clock ticks
This patch introduces a new folder in debugfs called heartbeat with the
following attributes:
- status
- queries_sent
- queries_failed
- config
All attributes except config are reading only. In particular:
- `status` file returns 0 when device is operational and -1 otherwise.
- `queries_sent` returns the total number of heartbeat queries sent.
- `queries_failed` returns the total number of heartbeat queries failed.
- `config` allows to adjust the frequency at which the firmware writes
counters to memory. This period is given in milliseconds and it is
fixed for GEN4 devices.
Signed-off-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The QAT hardware does not expose a mechanism to report its clock
frequency. This is required to implement the Heartbeat feature.
Add a clock measuring algorithm that estimates the frequency by
comparing the internal timestamp counter incremented by the firmware
with the time measured by the kernel.
The frequency value is only used internally and not exposed to
the user.
Signed-off-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The power management feature in QAT 4xxx devices can disable clock
sources used to implement timers. Because of that, the firmware needs to
get an external reliable source of time.
Add a kernel delayed work that periodically sends an event to the
firmware. This is triggered every 200ms. At each execution, the driver
sends a sync request to the firmware reporting the current timestamp
counter value.
This is a pre-requisite for enabling the heartbeat, telemetry and
rate limiting features.
Signed-off-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Expose FW counters statistics by providing the "fw_counters" file
under debugfs. Currently the statistics include the number of
requests sent to the FW and the number of responses received
from the FW for each Acceleration Engine, for all the QAT product
line.
This patch is based on earlier work done by Marco Chiappero.
Co-developed-by: Adam Guerin <adam.guerin@intel.com>
Signed-off-by: Adam Guerin <adam.guerin@intel.com>
Signed-off-by: Lucas Segarra Fernandez <lucas.segarra.fernandez@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Interacting with dynamic boost control messages requires the caller
to supply a signature. To allow validation of individual dynamic
boost control components, introduce a set of tests that can be run.
The tests can be run in 3 distinct different environments, and so
certain tests will be skipped depending on the environment.
1. Systems that do not support DBC.
2. Production systems that support DBC but are secured silicon.
3. Pre-production systems that support DBC but are unsecured silicon.
Unsecured silicon does not validate the signature, and so this allows
testing more of the state machine and functionality.
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Dynamic Boost Control commands are triggered by userspace with
an IOCTL interface that userspace will prepare proper buffers
for a request.
To allow prototyping and testing this interface, add a python3
command line script that loads the dbc_library.so for utilizing
the IOCTLs.
The signature to use and UID are passed as arguments to this script.
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add a small shared library that demonstrates the usage of the
IOCTL interface. This library can be linked to but, is
intended to be loaded and used by higher level languages
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
After software has authenticated a dynamic boost control request,
it can fetch and set supported parameters using a selection of messages.
Add support for these messages and export the ability to do this to
userspace.
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
As part of the authentication flow for Dynamic Boost Control, the calling
software will need to send a uid used in all of its future
communications.
Add support for another IOCTL call to let userspace software set this up.
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Dynamic Boost Control is a feature offered on AMD client platforms that
allows software to request and set power or frequency limits.
Only software that has authenticated with the PSP can retrieve or set
these limits.
Create a character device and ioctl for fetching the nonce. This ioctl
supports optionally passing authentication information which will influence
how many calls the nonce is valid for.
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Dynamic boost control needs to use platform access symbols
that look for the PSP master as part of initialization.
So move the PSP master before psp_init() so that dynamic boost
control can be initialized properly.
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The bootloader and TEE versions are stored in registers that can be
accessed from sysfs. This exports the information for recent client
and datacenter parts.
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
As it's not always obvious what PSP bootloader or TEE version are
present in OEM systems, add the ability to get this information from
sysfs for supported platforms.
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The attribute_show() macro is only valid for determining the availability
of security related sysfs entries. Rename the macro to better show this
relationship.
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The power management configuration of 4xxx devices is too aggressive
and in some conditions the device might be prematurely put to a low
power state.
Increase the idle filter value to prevent that.
In future, this will be set by firmware.
Fixes: e5745f3411 ("crypto: qat - enable power management for QAT GEN4")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Damian Muszynski <damian.muszynski@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
aes_set_key_common() performs runtime alignment to the void *raw_ctx
pointer. This facilitates consistent access to the 16byte-aligned
address during key extension.
However, the alignment is already handlded in the GCM-related setkey
functions before invoking the common function. Consequently, the
alignment in the common function is unnecessary for those functions.
To establish a consistent approach throughout the glue code, remove
the aes_ctx() call from its current location. Instead, place it at
each call site where the runtime alignment is currently absent.
Link: https://lore.kernel.org/lkml/20230605024623.GA4653@quark.localdomain/
Suggested-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Cc: linux-crypto@vger.kernel.org
Cc: x86@kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix kernel-doc warnings in verify_pefile:
crypto/asymmetric_keys/verify_pefile.c:423: warning: Excess function
parameter 'trust_keys' description in 'verify_pefile_signature'
crypto/asymmetric_keys/verify_pefile.c:423: warning: Function parameter
or member 'trusted_keys' not described in 'verify_pefile_signature'
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Defined CRYPTO_CHACHA20_P10 and CRYPTO POLY1305_P10 in Kconfig to
support optimized implementation for Power10 and later CPU.
Added new module driver chacha-p10-crypto and poly1305-p10-crypto.
Signed-off-by: Danny Tsen <dtsen@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Improve overall performance of chacha20 encrypt and decrypt operations
for Power10 or later CPU.
Signed-off-by: Danny Tsen <dtsen@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pull crypto fixes from Herbert Xu:
"Fix a couple of regressions in af_alg and incorrect return values in
crypto/asymmetric_keys/public_key"
* tag 'v6.5-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: algif_hash - Fix race between MORE and non-MORE sends
KEYS: asymmetric: Fix error codes
crypto: af_alg - Fix merging of written data into spliced pages
We just sorted the entries and fields last release, so just out of a
perverse sense of curiosity, I decided to see if we can keep things
ordered for even just one release.
The answer is "No. No we cannot".
I suggest that all kernel developers will need weekly training sessions,
involving a lot of Big Bird and Sesame Street. And at the yearly
maintainer summit, we will all sing the alphabet song together.
I doubt I will keep doing this. At some point "perverse sense of
curiosity" turns into just a cold dark place filled with sadness and
despair.
Repeats: 80e62bc848 ("MAINTAINERS: re-sort all entries and fields")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull dma-mapping fixes from Christoph Hellwig:
- swiotlb area sizing fixes (Petr Tesarik)
* tag 'dma-mapping-6.5-2023-07-09' of git://git.infradead.org/users/hch/dma-mapping:
swiotlb: reduce the number of areas to match actual memory pool size
swiotlb: always set the number of areas before allocating the pool
Pull irq update from Borislav Petkov:
- Optimize IRQ domain's name assignment
* tag 'irq_urgent_for_v6.5_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqdomain: Use return value of strreplace()
Pull x86 fpu fix from Borislav Petkov:
- Do FPU AP initialization on Xen PV too which got missed by the recent
boot reordering work
* tag 'x86_urgent_for_v6.5_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/xen: Fix secondary processors' FPU initialization
Pull x86 fix from Thomas Gleixner:
"A single fix for the mechanism to park CPUs with an INIT IPI.
On shutdown or kexec, the kernel tries to park the non-boot CPUs with
an INIT IPI. But the same code path is also used by the crash utility.
If the CPU which panics is not the boot CPU then it sends an INIT IPI
to the boot CPU which resets the machine.
Prevent this by validating that the CPU which runs the stop mechanism
is the boot CPU. If not, leave the other CPUs in HLT"
* tag 'x86-core-2023-07-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/smp: Don't send INIT to boot CPU
Pull MIPS fixes from Thomas Bogendoerfer:
- fixes for KVM
- fix for loongson build and cpu probing
- DT fixes
* tag 'mips_6.5_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: kvm: Fix build error with KVM_MIPS_DEBUG_COP0_COUNTERS enabled
MIPS: dts: add missing space before {
MIPS: Loongson: Fix build error when make modules_install
MIPS: KVM: Fix NULL pointer dereference
MIPS: Loongson: Fix cpu_probe_loongson() again
Pull xfs fix from Darrick Wong:
"Nothing exciting here, just getting rid of a gcc warning that I got
tired of seeing when I turn on gcov"
* tag 'xfs-6.5-merge-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: fix uninit warning in xfs_growfs_data
Pull more smb client updates from Steve French:
- fix potential use after free in unmount
- minor cleanup
- add worker to cleanup stale directory leases
* tag '6.5-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Add a laundromat thread for cached directories
smb: client: remove redundant pointer 'server'
cifs: fix session state transition to avoid use-after-free issue
Lockdep is certainly right to complain about
(&vma->vm_lock->lock){++++}-{3:3}, at: vma_start_write+0x2d/0x3f
but task is already holding lock:
(&mapping->i_mmap_rwsem){+.+.}-{3:3}, at: mmap_region+0x4dc/0x6db
Invert those to the usual ordering.
Fixes: 33313a747e ("mm: lock newly mapped VMA which can be modified after it becomes visible")
Cc: stable@vger.kernel.org
Signed-off-by: Hugh Dickins <hughd@google.com>
Tested-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull hotfixes from Andrew Morton:
"16 hotfixes. Six are cc:stable and the remainder address post-6.4
issues"
The merge undoes the disabling of the CONFIG_PER_VMA_LOCK feature, since
it was all hopefully fixed in mainline.
* tag 'mm-hotfixes-stable-2023-07-08-10-43' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
lib: dhry: fix sleeping allocations inside non-preemptable section
kasan, slub: fix HW_TAGS zeroing with slub_debug
kasan: fix type cast in memory_is_poisoned_n
mailmap: add entries for Heiko Stuebner
mailmap: update manpage link
bootmem: remove the vmemmap pages from kmemleak in free_bootmem_page
MAINTAINERS: add linux-next info
mailmap: add Markus Schneider-Pargmann
writeback: account the number of pages written back
mm: call arch_swap_restore() from do_swap_page()
squashfs: fix cache race with migration
mm/hugetlb.c: fix a bug within a BUG(): inconsistent pte comparison
docs: update ocfs2-devel mailing list address
MAINTAINERS: update ocfs2-devel mailing list address
mm: disable CONFIG_PER_VMA_LOCK until its fixed
fork: lock VMAs of the parent process when forking
When forking a child process, the parent write-protects anonymous pages
and COW-shares them with the child being forked using copy_present_pte().
We must not take any concurrent page faults on the source vma's as they
are being processed, as we expect both the vma and the pte's behind it
to be stable. For example, the anon_vma_fork() expects the parents
vma->anon_vma to not change during the vma copy.
A concurrent page fault on a page newly marked read-only by the page
copy might trigger wp_page_copy() and a anon_vma_prepare(vma) on the
source vma, defeating the anon_vma_clone() that wasn't done because the
parent vma originally didn't have an anon_vma, but we now might end up
copying a pte entry for a page that has one.
Before the per-vma lock based changes, the mmap_lock guaranteed
exclusion with concurrent page faults. But now we need to do a
vma_start_write() to make sure no concurrent faults happen on this vma
while it is being processed.
This fix can potentially regress some fork-heavy workloads. Kernel
build time did not show noticeable regression on a 56-core machine while
a stress test mapping 10000 VMAs and forking 5000 times in a tight loop
shows ~5% regression. If such fork time regression is unacceptable,
disabling CONFIG_PER_VMA_LOCK should restore its performance. Further
optimizations are possible if this regression proves to be problematic.
Suggested-by: David Hildenbrand <david@redhat.com>
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Closes: https://lore.kernel.org/all/dbdef34c-3a07-5951-e1ae-e9c6e3cdf51b@kernel.org/
Reported-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Closes: https://lore.kernel.org/all/b198d649-f4bf-b971-31d0-e8433ec2a34c@applied-asynchrony.com/
Reported-by: Jacob Young <jacobly.alt@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217624
Fixes: 0bff0aaea0 ("x86/mm: try VMA lock-based page fault handling first")
Cc: stable@vger.kernel.org
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>