IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
commit 7c3151585730b7095287be8162b846d31e6eee61 upstream.
The elf-fdpic loader hard sets the process personality to either
PER_LINUX_FDPIC for true elf-fdpic binaries or to PER_LINUX for normal ELF
binaries (in this case they would be constant displacement compiled with
-pie for example). The problem with that is that it will lose any other
bits that may be in the ELF header personality (such as the "bug
emulation" bits).
On the ARM architecture the ADDR_LIMIT_32BIT flag is used to signify a
normal 32bit binary - as opposed to a legacy 26bit address binary. This
matters since start_thread() will set the ARM CPSR register as required
based on this flag. If the elf-fdpic loader loses this bit the process
will be mis-configured and crash out pretty quickly.
Modify elf-fdpic loader personality setting so that it preserves the upper
three bytes by using the SET_PERSONALITY macro to set it. This macro in
the generic case sets PER_LINUX and preserves the upper bytes.
Architectures can override this for their specific use case, and ARM does
exactly this.
The problem shows up quite easily running under qemu using the ARM
architecture, but not necessarily on all types of real ARM hardware. If
the underlying ARM processor does not support the legacy 26-bit addressing
mode then everything will work as expected.
Link: https://lkml.kernel.org/r/20230907011808.2985083-1-gerg@kernel.org
Fixes: 1bde925d23547 ("fs/binfmt_elf_fdpic.c: provide NOMMU loader for regular ELF binaries")
Signed-off-by: Greg Ungerer <gerg@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Greg Ungerer <gerg@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 753a4d531bc518633ea88ac0ed02b25a16823d51 upstream.
On certain SATA controllers, softreset fails after wakeup from S2RAM with
the message "softreset failed (1st FIS failed)", sometimes resulting in
drives not being detected again. With the increased timeout, this issue
is avoided. Instead, "softreset failed (device not ready)" is now
logged 1-2 times; this later failure seems to cause fewer problems
however, and the drives are detected reliably once they've spun up and
the probe is retried.
The issue was observed with the primary SATA controller of the QNAP
TS-453B, which is an "Intel Corporation Celeron/Pentium Silver Processor
SATA Controller [8086:31e3] (rev 06)" integrated in the Celeron J4125 CPU,
and the following drives:
- Seagate IronWolf ST12000VN0008
- Seagate IronWolf ST8000NE0004
The SATA controller seems to be more relevant to this issue than the
drives, as the same drives are always detected reliably on the secondary
SATA controller on the same board (an ASMedia 106x) without any "softreset
failed" errors even without the increased timeout.
Fixes: e7d3ef13d52a ("libata: change drive ready wait after hard reset to 5s")
Cc: stable@vger.kernel.org
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 75e2bd5f1ede42a2bc88aa34b431e1ace8e0bea0 upstream.
libsas does its own domain based power management of ports. For such
ports, libata should not use a device type defining power management
operations as executing these operations for suspend/resume in addition
to libsas calls to ata_sas_port_suspend() and ata_sas_port_resume() is
not necessary (and likely dangerous to do, even though problems are not
seen currently).
Introduce the new ata_port_sas_type device_type for ports managed by
libsas. This new device type is used in ata_tport_add() and is defined
without power management operations.
Fixes: 2fcbdcb4c802 ("[SCSI] libata: export ata_port suspend/resume infrastructure for sas")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 84d76529c650f887f1e18caee72d6f0589e1baf9 upstream.
Whenever an ATA adapter driver is removed (e.g. rmmod),
ata_port_detach() is called repeatedly for all the adapter ports to
remove (unload) the devices attached to the port and delete the port
device itself. Removing of devices is done using libata EH with the
ATA_PFLAG_UNLOADING port flag set. This causes libata EH to execute
ata_eh_unload() which disables all devices attached to the port.
ata_port_detach() finishes by calling scsi_remove_host() to remove the
scsi host associated with the port. This function will trigger the
removal of all scsi devices attached to the host and in the case of
disks, calls to sd_shutdown() which will flush the device write cache
and stop the device. However, given that the devices were already
disabled by ata_eh_unload(), the synchronize write cache command and
start stop unit commands fail. E.g. running "rmmod ahci" with first
removing sd_mod results in error messages like:
ata13.00: disable device
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
sd 0:0:0:0: [sda] Stopping disk
sd 0:0:0:0: [sda] Start/Stop Unit failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
Fix this by removing all scsi devices of the ata devices connected to
the port before scheduling libata EH to disable the ATA devices.
Fixes: 720ba12620ee ("[PATCH] libata-hp: update unload-unplug")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Tested-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3b8e0af4a7a331d1510e963b8fd77e2fca0a77f1 upstream.
The function ata_port_request_pm() checks the port flag
ATA_PFLAG_PM_PENDING and calls ata_port_wait_eh() if this flag is set to
ensure that power management operations for a port are not scheduled
simultaneously. However, this flag check is done without holding the
port lock.
Fix this by taking the port lock on entry to the function and checking
the flag under this lock. The lock is released and re-taken if
ata_port_wait_eh() needs to be called. The two WARN_ON() macros checking
that the ATA_PFLAG_PM_PENDING flag was cleared are removed as the first
call is racy and the second one done without holding the port lock.
Fixes: 5ef41082912b ("ata: add ata port system PM callbacks")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e0b65f9b81fef180cf5f103adecbe5505c961153 upstream.
Alex reported that running ssh over IPv6 does not work with
Thunderbolt/USB4 networking driver. The reason for that is that driver
should call skb_is_gso() before calling skb_is_gso_v6(), and it should
not return false after calculates the checksum successfully. This probably
was a copy paste error from the original driver where it was done properly.
Reported-by: Alex Balcanquall <alex@alexbal.com>
Fixes: e69b6c02b4c3 ("net: Add support for networking over Thunderbolt cable")
Cc: stable@vger.kernel.org
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c0bb9fb0e52a64601d38b3739b729d9138d4c8a1 upstream.
Marcus and Satya reported an issue where BTF_ID macro generates same
symbol in separate objects and that breaks final vmlinux link.
ld.lld: error: ld-temp.o <inline asm>:14577:1: symbol
'__BTF_ID__struct__cgroup__624' is already defined
This can be triggered under specific configs when __COUNTER__ happens to
be the same for the same symbol in two different translation units,
which is already quite unlikely to happen.
Add __LINE__ number suffix to make BTF_ID symbol more unique, which is
not a complete fix, but it would help for now and meanwhile we can work
on better solution as suggested by Andrii.
Cc: stable@vger.kernel.org
Reported-by: Satya Durga Srinivasu Prabhala <quic_satyap@quicinc.com>
Reported-by: Marcus Seyfarth <m.seyfarth@gmail.com>
Closes: https://github.com/ClangBuiltLinux/linux/issues/1913
Debugged-by: Nathan Chancellor <nathan@kernel.org>
Co-developed-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/CAEf4Bzb5KQ2_LmhN769ifMeSJaWfebccUasQOfQKaOd0nQ51tw@mail.gmail.com/
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20230915-bpf_collision-v3-2-263fc519c21f@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8f908db77782630c45ba29dac35c434b5ce0b730 upstream.
Marcus and Satya reported an issue where BTF_ID macro generates same
symbol in separate objects and that breaks final vmlinux link.
ld.lld: error: ld-temp.o <inline asm>:14577:1: symbol
'__BTF_ID__struct__cgroup__624' is already defined
This can be triggered under specific configs when __COUNTER__ happens to
be the same for the same symbol in two different translation units,
which is already quite unlikely to happen.
Add __LINE__ number suffix to make BTF_ID symbol more unique, which is
not a complete fix, but it would help for now and meanwhile we can work
on better solution as suggested by Andrii.
Cc: stable@vger.kernel.org
Reported-by: Satya Durga Srinivasu Prabhala <quic_satyap@quicinc.com>
Reported-by: Marcus Seyfarth <m.seyfarth@gmail.com>
Closes: https://github.com/ClangBuiltLinux/linux/issues/1913
Debugged-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/bpf/CAEf4Bzb5KQ2_LmhN769ifMeSJaWfebccUasQOfQKaOd0nQ51tw@mail.gmail.com/
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20230915-bpf_collision-v3-1-263fc519c21f@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 58bfe2ccec5f9f137b41dd38f335290dcc13cd5c upstream.
A user reported some issues with smaller file systems that get very
full. While investigating this issue I noticed that df wasn't showing
100% full, despite having 0 chunk space and having < 1MiB of available
metadata space.
This turns out to be an overflow issue, we're doing:
total_available_metadata_space - SZ_4M < global_block_rsv_size
to determine if there's not enough space to make metadata allocations,
which overflows if total_available_metadata_space is < 4M. Fix this by
checking to see if our available space is greater than the 4M threshold.
This makes df properly report 100% usage on the file system.
CC: stable@vger.kernel.org # 4.14+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1e0cb399c7653462d9dadf8ab9425337c355d358 upstream.
It was discovered that the ring buffer polling was incorrectly stating
that read would not block, but that's because polling did not take into
account that reads will block if the "buffer-percent" was set. Instead,
the ring buffer polling would say reads would not block if there was any
data in the ring buffer. This was incorrect behavior from a user space
point of view. This was fixed by commit 42fb0a1e84ff by having the polling
code check if the ring buffer had more data than what the user specified
"buffer percent" had.
The problem now is that the polling code did not register itself to the
writer that it wanted to wait for a specific "full" value of the ring
buffer. The result was that the writer would wake the polling waiter
whenever there was a new event. The polling waiter would then wake up, see
that there's not enough data in the ring buffer to notify user space and
then go back to sleep. The next event would wake it up again.
Before the polling fix was added, the code would wake up around 100 times
for a hackbench 30 benchmark. After the "fix", due to the constant waking
of the writer, it would wake up over 11,0000 times! It would never leave
the kernel, so the user space behavior was still "correct", but this
definitely is not the desired effect.
To fix this, have the polling code add what it's waiting for to the
"shortest_full" variable, to tell the writer not to wake it up if the
buffer is not as full as it expects to be.
Note, after this fix, it appears that the waiter is now woken up around 2x
the times it was before (~200). This is a tremendous improvement from the
11,000 times, but I will need to spend some time to see why polling is
more aggressive in its wakeups than the read blocking code.
Link: https://lore.kernel.org/linux-trace-kernel/20230929180113.01c2cae3@rorschach.local.home
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Fixes: 42fb0a1e84ff ("tracing/ring-buffer: Have polling block on watermark")
Reported-by: Julia Lawall <julia.lawall@inria.fr>
Tested-by: Julia Lawall <julia.lawall@inria.fr>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 578d7699e5c2add8c2e9549d9d75dfb56c460cb3 upstream.
The no-MMU implementation of /proc/<pid>/map doesn't normally release
the mmap read lock, because it uses !IS_ERR_OR_NULL(_vml) to determine
whether to release the lock. Since _vml is NULL when the end of the
mappings is reached, the lock is not released.
Reading /proc/1/maps twice doesn't cause a hang because it only
takes the read lock, which can be taken multiple times and therefore
doesn't show any problem if the lock isn't released. Instead, you need
to perform some operation that attempts to take the write lock after
reading /proc/<pid>/maps. To actually reproduce the bug, compile the
following code as 'proc_maps_bug':
#include <stdio.h>
#include <unistd.h>
#include <sys/mman.h>
int main(int argc, char *argv[]) {
void *buf;
sleep(1);
buf = mmap(NULL, 4096, PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
puts("mmap returned");
return 0;
}
Then, run:
./proc_maps_bug &; cat /proc/$!/maps; fg
Without this patch, mmap() will hang and the command will never
complete.
This code was incorrectly adapted from the MMU implementation, which at
the time released the lock in m_next() before returning the last entry.
The MMU implementation has diverged further from the no-MMU version since
then, so this patch brings their locking and error handling into sync,
fixing the bug and hopefully avoiding similar issues in the future.
Link: https://lkml.kernel.org/r/20230914163019.4050530-2-ben.wolsieffer@hefring.com
Fixes: 47fecca15c09 ("fs/proc/task_nommu.c: don't use priv->task->mm")
Signed-off-by: Ben Wolsieffer <ben.wolsieffer@hefring.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Giulio Benetti <giulio.benetti@benettiengineering.com>
Cc: Greg Ungerer <gerg@uclinux.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a275ab62606bcd894ddff09460f7d253828313dc upstream.
This reverts commit 88428cc4ae7abcc879295fbb19373dd76aad2bdd.
The problem this commit is intended to fix was comprehensively fixed
in commit 7de62bc09fe6 ("SUNRPC dont update timeout value on connection
reset").
Since then, this commit has been preventing the correct timeout of soft
mounted requests.
Cc: stable@vger.kernel.org # 5.9.x: 09252177d5f9: SUNRPC: Handle major timeout in xprt_adjust_timeout()
Cc: stable@vger.kernel.org # 5.9.x: 7de62bc09fe6: SUNRPC dont update timeout value on connection reset
Cc: stable@vger.kernel.org # 5.9.x
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3914784553f68c931fc666dbe7e86fe881aada38 upstream.
We have to unregister tco_pdev also if i2c_add_adapter() fails.
Fixes: 9424693035a5 ("i2c: i801: Create iTCO device on newer Intel PCHs")
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3ef600923521616ebe192c893468ad0424de2afb upstream.
For REPORT SUPPORTED OPERATION CODES command, the service action field is
defined as bits 0-4 in the second byte in the CDB. Bits 5-7 in the second
byte are reserved.
Only look at the service action field in the second byte when determining
if the MAINTENANCE IN opcode is a REPORT SUPPORTED OPERATION CODES command.
This matches how we only look at the service action field in the second
byte when determining if the SERVICE ACTION IN(16) opcode is a READ
CAPACITY(16) command (reserved bits 5-7 in the second byte are ignored).
Fixes: 7b2030942859 ("libata: Add support for SCT Write Same")
Cc: stable@vger.kernel.org
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 057a28ef93bdbe84326d34cdb5543afdaab49fe1 upstream.
Lenovo ThinkCentre M70q had boot up pop noise.
Disable power save will solve pop issue.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/315900e2efef42fd9855eacfeb443abd@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f15f29fd4779be8a418b66e9d52979bb6d6c2325 ]
Chain binding only requires the rule addition/insertion command within
the same transaction. Removal of rules from chain bindings within the
same transaction makes no sense, userspace does not utilize this
feature. Replace nft_chain_is_bound() check to nft_chain_binding() in
rule deletion commands. Replace command implies a rule deletion, reject
this command too.
Rule flush command can also safely rely on this nft_chain_binding()
check because unbound chains are not allowed since 62e1e94b246e
("netfilter: nf_tables: reject unbound chain set before commit phase").
Fixes: d0e2c7de92c7 ("netfilter: nf_tables: add NFT_CHAIN_BINDING")
Reported-by: Kevin Rich <kevinrich1337@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 7ee29facd8a9c5a26079148e36bcf07141b3a6bc upstream.
In nilfs_gccache_submit_read_data(), brelse(bh) is called to drop the
reference count of bh when the call to nilfs_dat_translate() fails. If
the reference count hits 0 and its owner page gets unlocked, bh may be
freed. However, bh->b_page is dereferenced to put the page after that,
which may result in a use-after-free bug. This patch moves the release
operation after unlocking and putting the page.
NOTE: The function in question is only called in GC, and in combination
with current userland tools, address translation using DAT does not occur
in that function, so the code path that causes this issue will not be
executed. However, it is possible to run that code path by intentionally
modifying the userland GC library or by calling the GC ioctl directly.
[konishi.ryusuke@gmail.com: NOTE added to the commit log]
Link: https://lkml.kernel.org/r/1543201709-53191-1-git-send-email-bianpan2016@163.com
Link: https://lkml.kernel.org/r/20230921141731.10073-1-konishi.ryusuke@gmail.com
Fixes: a3d93f709e89 ("nilfs2: block cache for garbage collection")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Reported-by: Ferry Meng <mengferry@linux.alibaba.com>
Closes: https://lkml.kernel.org/r/20230818092022.111054-1-mengferry@linux.alibaba.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cce7fc8b29961b64fadb1ce398dc5ff32a79643b upstream.
In case the leaf driver wants to use IRQ polling (irq = 0) and
IIR register shows that an interrupt happened in the 8250 hardware
the IRQ data can be NULL. In such a case we need to skip the wake
event as we came to this path from the timer interrupt and quite
likely system is already awake.
Without this fix we have got an Oops:
serial8250: ttyS0 at I/O 0x3f8 (irq = 0, base_baud = 115200) is a 16550A
...
BUG: kernel NULL pointer dereference, address: 0000000000000010
RIP: 0010:serial8250_handle_irq+0x7c/0x240
Call Trace:
? serial8250_handle_irq+0x7c/0x240
? __pfx_serial8250_timeout+0x10/0x10
Fixes: 0ba9e3a13c6a ("serial: 8250: Add missing wakeup event reporting")
Cc: stable <stable@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20230831222555.614426-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 29346e217b8ab8a52889b88f00b268278d6b7668 upstream.
This reverts commit 9b9c8195f3f0d74a826077fc1c01b9ee74907239.
The commit above is reverted as it did not solve the original issue.
gsm_cleanup_mux() tries to free up the virtual ttys by calling
gsm_dlci_release() for each available DLCI. There, dlci_put() is called to
decrease the reference counter for the DLCI via tty_port_put() which
finally calls gsm_dlci_free(). This already clears the pointer which is
being checked in gsm_cleanup_mux() before calling gsm_dlci_release().
Therefore, it is not necessary to clear this pointer in gsm_cleanup_mux()
as done in the reverted commit. The commit introduces a null pointer
dereference:
<TASK>
? __die+0x1f/0x70
? page_fault_oops+0x156/0x420
? search_exception_tables+0x37/0x50
? fixup_exception+0x21/0x310
? exc_page_fault+0x69/0x150
? asm_exc_page_fault+0x26/0x30
? tty_port_put+0x19/0xa0
gsmtty_cleanup+0x29/0x80 [n_gsm]
release_one_tty+0x37/0xe0
process_one_work+0x1e6/0x3e0
worker_thread+0x4c/0x3d0
? __pfx_worker_thread+0x10/0x10
kthread+0xe1/0x110
? __pfx_kthread+0x10/0x10
ret_from_fork+0x2f/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
</TASK>
The actual issue is that nothing guards dlci_put() from being called
multiple times while the tty driver was triggered but did not yet finished
calling gsm_dlci_free().
Fixes: 9b9c8195f3f0 ("tty: n_gsm: fix UAF in gsm_cleanup_mux")
Cc: stable <stable@kernel.org>
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20230914051507.3240-1-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 387ef964460f14fe1c1ea29aba70e22731ea7cf7 ]
Currently in "smack_inode_copy_up()" function, process label is
changed with the label on parent inode. Due to which,
process is assigned directory label and whatever file or directory
created by the process are also getting directory label
which is wrong label.
Changes has been done to use label of overlay inode instead
of parent inode.
Signed-off-by: Vishal Goel <vishal.goel@samsung.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3a3d8fce31a49363cc31880dce5e3b0617c9c38b ]
Enhance smack_inode_getsecurity() to retrieve the value for
SMACK64TRANSMUTE from the inode security blob, similarly to SMACK64.
This helps to display accurate values in the situation where the security
labels come from mount options and not from xattrs.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2c085f3a8f23c9b444e8b99d93c15d7ce870fc4e ]
smack_dentry_create_files_as() determines whether transmuting should occur
based on the label of the parent directory the new inode will be added to,
and not the label of the directory where it is created.
This helps for example to do transmuting on overlayfs, since the latter
first creates the inode in the working directory, and then moves it to the
correct destination.
However, despite smack_dentry_create_files_as() provides the correct label,
smack_inode_init_security() does not know from passed information whether
or not transmuting occurred. Without this information,
smack_inode_init_security() cannot set SMK_INODE_CHANGED in smk_flags,
which will result in the SMACK64TRANSMUTE xattr not being set in
smack_d_instantiate().
Thus, add the smk_transmuted field to the task_smack structure, and set it
in smack_dentry_create_files_as() to smk_task if transmuting occurred. If
smk_task is equal to smk_transmuted in smack_inode_init_security(), act as
if transmuting was successful but without taking the label from the parent
directory (the inode label was already set correctly from the current
credentials in smack_inode_alloc_security()).
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cf6b5ffdce5a78b2fcb0e53b3a2487c490bcbf7f ]
While iterating through an SCTP packet's chunks, skb_header_pointer() is
called for the minimum expected chunk header size. If (that part of) the
skbuff is non-linear, the following memcpy() may read data past
temporary buffer '_sch'. Use skb_copy_bits() instead which does the
right thing in this situation.
Fixes: 133dc203d77df ("netfilter: nft_exthdr: Support SCTP chunks")
Suggested-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Phil Sutter <phil@nwl.cc>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5acc44f39458f43dac9724cefa4da29847cfe997 ]
Since user space does not generate a payload dependency, plain sctp
chunk matches cause searching in non-SCTP packets, too. Avoid this
potential mis-interpretation of packet data by checking pkt->tprot.
Fixes: 133dc203d77df ("netfilter: nft_exthdr: Support SCTP chunks")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit ef9b7bf52c2f47f0a9bf988543c577b92c92d15e upstream.
Daniel reported that the commit 1ae3e78c0820 ("watchdog: iTCO_wdt: No
need to stop the timer in probe") makes QEMU implementation of the iTCO
watchdog not to trigger reboot anymore when NO_REBOOT flag is initially
cleared using this option (in QEMU command line):
-global ICH9-LPC.noreboot=false
The problem with the commit is that it left the unconditional setting of
NO_REBOOT that is not cleared anymore when the kernel keeps pinging the
watchdog (as opposed to the previous code that called iTCO_wdt_stop()
that cleared it).
Fix this so that we only set NO_REBOOT if the watchdog was not initially
running.
Fixes: 1ae3e78c0820 ("watchdog: iTCO_wdt: No need to stop the timer in probe")
Reported-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20221028062750.45451-1-mika.westerberg@linux.intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 1ae3e78c08209ac657c59f6f7ea21bbbd7f6a1d4 upstream.
The watchdog core can handle pinging of the watchdog before userspace
opens the device. For this reason instead of stopping the timer, just
mark it as running and let the watchdog core take care of it.
Cc: Malin Jonsson <malin.jonsson@ericsson.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20210921102900.61586-1-mika.westerberg@linux.intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dad651b2a44eb6b201738f810254279dca29d30d ]
If a device has no NUMA node information associated with it, the driver
puts the device in node first_memory_node (say node 0). Not having a
NUMA node and being associated with node 0 are completely different
things and it makes little sense to mix the two.
Signed-off-by: Pratyush Yadav <ptyadav@amazon.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2e87570be9d2746e7c4e7ab1cc18fd3ca7de2768 ]
Add a helper that allocates the nvme_dev structure up to the point where
we can call nvme_init_ctrl. This pairs with the free_ctrl method and can
thus be used to cleanup the teardown path and make it more symmetric.
Note that this now calls nvme_init_ctrl a lot earlier during probing,
which also means the per-controller character device shows up earlier.
Due to the controller state no commnds can be send on it, but it might
make sense to delay the cdev registration until nvme_init_ctrl_finish.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Tested-by Gerd Bayer <gbayer@linxu.ibm.com>
Stable-dep-of: dad651b2a44e ("nvme-pci: do not set the NUMA node of device if it has none")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 081a7d958ce4b65f9aab6e70e65b0b2e0b92297c ]
Add a helper to create the iod mempool.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Tested-by Gerd Bayer <gbayer@linxu.ibm.com>
Stable-dep-of: dad651b2a44e ("nvme-pci: do not set the NUMA node of device if it has none")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2744d7a0733503931b71c00d156119ced002f22c ]
Although first implemented for NVME, this check may be usable by
other drivers as well. Microsoft's specification explicitly mentions
that is may be usable by SATA and AHCI devices. Google also indicates
that they have used this with SDHCI in a downstream kernel tree that
a user can plug a storage device into.
Link: https://docs.microsoft.com/en-us/windows-hardware/design/component-guidelines/power-management-for-storage-hardware-devices-intro
Suggested-by: Keith Busch <kbusch@kernel.org>
CC: Shyam-sundar S-k <Shyam-sundar.S-k@amd.com>
CC: Alexander Deucher <Alexander.Deucher@amd.com>
CC: Rafael J. Wysocki <rjw@rjwysocki.net>
CC: Prike Liang <prike.liang@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Stable-dep-of: dad651b2a44e ("nvme-pci: do not set the NUMA node of device if it has none")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit f2aa197e4794bf4c2c0c9570684f86e6fa103e8b upstream.
task_css_set_check() will use rcu_dereference_check() to check for
rcu_read_lock_held() on the read-side, which is not true after commit
dc6e0818bc9a ("sched/cpuacct: Optimize away RCU read lock"). This
commit drop explicit rcu_read_lock(), change to RCU-sched read-side
critical section. So fix the RCU warning by adding check for
rcu_read_lock_sched_held().
Fixes: dc6e0818bc9a ("sched/cpuacct: Optimize away RCU read lock")
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Reported-by: syzbot+16e3f2c77e7c5a0113f9@syzkaller.appspotmail.com
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Tejun Heo <tj@kernel.org>
Tested-by: Zhouyi Zhou <zhouzhouyi@gmail.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20220305034103.57123-1-zhouchengming@bytedance.com
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit dc6e0818bc9a0336d9accf3ea35d146d72aa7a18 upstream.
Since cpuacct_charge() is called from the scheduler update_curr(),
we must already have rq lock held, then the RCU read lock can
be optimized away.
And do the same thing in it's wrapper cgroup_account_cputime(),
but we can't use lockdep_assert_rq_held() there, which defined
in kernel/sched/sched.h.
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220220051426.5274-2-zhouchengming@bytedance.com
[OP: adjusted lockdep_assert_rq_held() -> lockdep_assert_held()]
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 248cc9993d1cc12b8e9ed716cc3fc09f6c3517dd upstream.
The cpuacct_account_field() is always called by the current task
itself, so it's ok to use __this_cpu_add() to charge the tick time.
But cpuacct_charge() maybe called by update_curr() in load_balance()
on a random CPU, different from the CPU on which the task is running.
So __this_cpu_add() will charge that cputime to a random incorrect CPU.
Fixes: 73e6aafd9ea8 ("sched/cpuacct: Simplify the cpuacct code")
Reported-by: Minye Zhu <zhuminye@bytedance.com>
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220220051426.5274-1-zhouchengming@bytedance.com
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit dd02d4234c9a2214a81c57a16484304a1a51872a upstream.
cpuacct has 2 different ways of accounting and showing user
and system times.
The first one uses cpuacct_account_field() to account times
and cpuacct.stat file to expose them. And this one seems to work ok.
The second one is uses cpuacct_charge() function for accounting and
set of cpuacct.usage* files to show times. Despite some attempts to
fix it in the past it still doesn't work. Sometimes while running KVM
guest the cpuacct_charge() accounts most of the guest time as
system time. This doesn't match with user&system times shown in
cpuacct.stat or proc/<pid>/stat.
Demonstration:
# git clone https://github.com/aryabinin/kvmsample
# make
# mkdir /sys/fs/cgroup/cpuacct/test
# echo $$ > /sys/fs/cgroup/cpuacct/test/tasks
# ./kvmsample &
# for i in {1..5}; do cat /sys/fs/cgroup/cpuacct/test/cpuacct.usage_sys; sleep 1; done
1976535645
2979839428
3979832704
4983603153
5983604157
Use cpustats accounted in cpuacct_account_field() as the source
of user/sys times for cpuacct.usage* files. Make cpuacct_charge()
to account only summary execution time.
Fixes: d740037fac70 ("sched/cpuacct: Split usage accounting into user_usage and sys_usage")
Signed-off-by: Andrey Ryabinin <arbn@yandex-team.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211115164607.23784-3-arbn@yandex-team.com
[OP: adjusted context for v5.10]
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 88cc47e24597971b05b6e94c28a2fc81d2a8d61a ]
YYNOMEM was introduced in bison 3.81, so define it as YYABORT for older
versions, which should provide the previous perf behaviour.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f75f71b2c418a27a7c05139bb27a0c83adf88d19 ]
Fix linker error if FB=m about missing fb_io_read and fb_io_write. The
linker's error message suggests that this config setting has already
been broken for other symbols.
All errors (new ones prefixed by >>):
sh4-linux-ld: drivers/video/fbdev/sh7760fb.o: in function `sh7760fb_probe':
sh7760fb.c:(.text+0x374): undefined reference to `framebuffer_alloc'
sh4-linux-ld: sh7760fb.c:(.text+0x394): undefined reference to `fb_videomode_to_var'
sh4-linux-ld: sh7760fb.c:(.text+0x39c): undefined reference to `fb_alloc_cmap'
sh4-linux-ld: sh7760fb.c:(.text+0x3a4): undefined reference to `register_framebuffer'
sh4-linux-ld: sh7760fb.c:(.text+0x3ac): undefined reference to `fb_dealloc_cmap'
sh4-linux-ld: sh7760fb.c:(.text+0x434): undefined reference to `framebuffer_release'
sh4-linux-ld: drivers/video/fbdev/sh7760fb.o: in function `sh7760fb_remove':
sh7760fb.c:(.text+0x800): undefined reference to `unregister_framebuffer'
sh4-linux-ld: sh7760fb.c:(.text+0x804): undefined reference to `fb_dealloc_cmap'
sh4-linux-ld: sh7760fb.c:(.text+0x814): undefined reference to `framebuffer_release'
>> sh4-linux-ld: drivers/video/fbdev/sh7760fb.o:(.rodata+0xc): undefined reference to `fb_io_read'
>> sh4-linux-ld: drivers/video/fbdev/sh7760fb.o:(.rodata+0x10): undefined reference to `fb_io_write'
sh4-linux-ld: drivers/video/fbdev/sh7760fb.o:(.rodata+0x2c): undefined reference to `cfb_fillrect'
sh4-linux-ld: drivers/video/fbdev/sh7760fb.o:(.rodata+0x30): undefined reference to `cfb_copyarea'
sh4-linux-ld: drivers/video/fbdev/sh7760fb.o:(.rodata+0x34): undefined reference to `cfb_imageblit'
Suggested-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202309130632.LS04CPWu-lkp@intel.com/
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230918090400.13264-1-tzimmermann@suse.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3780bb29311eccb7a1c9641032a112eed237f7e3 ]
Report the carrier/no-carrier state for the network interface
shared between the BMC and the passthrough channel. Without this
functionality the BMC is unable to reconfigure the NIC in the event
of a re-cabling to a different subnet.
Signed-off-by: Johnathan Mantey <johnathanx.mantey@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cc879ab3ce39bc39f9b1d238b283f43a5f6f957d ]
thread_change_pc() uses CPU local data, so must be protected from
swapping CPUs while it is reading the breakpoint struct.
The error is more noticeable after 1e60f3564bad ("powerpc/watchpoints:
Track perf single step directly on the breakpoint"), which added an
unconditional __this_cpu_read() call in thread_change_pc(). However the
existing __this_cpu_read() that runs if a breakpoint does need to be
re-inserted has the same issue.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230829063457.54157-2-bgray@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 735de5caf79e06cc9fb96b1b4f4974674ae3e917 ]
The WARN_ONCE was issued also in cases that had nothing to do with VM_IO
(e.g. if the start address was just a random value and uaccess fails with
-EFAULT).
There are no reports of WARN_ONCE being issued for actual VM_IO cases, so
just drop it and instead add a note to the comment before the function.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reported-by: Yikebaer Aizezi <yikebaer61@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7cb779a6867fea00b4209bcf6de2f178a743247d ]
Commit 151e887d8ff9 ("veth: Fixing transmit return status for dropped
packets") exposed the fact that bpf_clone_redirect is capable of
returning raw NET_XMIT_XXX return codes.
This is in the conflict with its UAPI doc which says the following:
"0 on success, or a negative error in case of failure."
Update the UAPI to reflect the fact that bpf_clone_redirect can
return positive error numbers, but don't explicitly define
their meaning.
Reported-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230911194731.286342-1-sdf@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 18495676f7886e105133f1dc06c1d5e8d5436f32 ]
Reset the FLSHxCR1 registers to default value. ROM may set the register
value and it affects the SPI NAND normal functions.
Signed-off-by: Han Xu <han.xu@nxp.com>
Link: https://lore.kernel.org/r/20230906183254.235847-1-han.xu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 80cc944eca4f0baa9c381d0706f3160e491437f2 ]
ata_scsi_port_error_handler() starts off by clearing ATA_PFLAG_EH_PENDING,
before calling ap->ops->error_handler() (without holding the ap->lock).
If an error IRQ is received while ap->ops->error_handler() is running,
the irq handler will set ATA_PFLAG_EH_PENDING.
Once ap->ops->error_handler() returns, ata_scsi_port_error_handler()
checks if ATA_PFLAG_EH_PENDING is set, and if it is, another iteration
of ATA EH is performed.
The problem is that ATA_PFLAG_EH_PENDING is not only cleared by
ata_scsi_port_error_handler(), it is also cleared by ata_eh_reset().
ata_eh_reset() is called by ap->ops->error_handler(). This additional
clearing done by ata_eh_reset() breaks the whole retry logic in
ata_scsi_port_error_handler(). Thus, if an error IRQ is received while
ap->ops->error_handler() is running, the port will currently remain
frozen and will never get re-enabled.
The additional clearing in ata_eh_reset() was introduced in commit
1e641060c4b5 ("libata: clear eh_info on reset completion").
Looking at the original error report:
https://marc.info/?l=linux-ide&m=124765325828495&w=2
We can see the following happening:
[ 1.074659] ata3: XXX port freeze
[ 1.074700] ata3: XXX hardresetting link, stopping engine
[ 1.074746] ata3: XXX flipping SControl
[ 1.411471] ata3: XXX irq_stat=400040 CONN|PHY
[ 1.411475] ata3: XXX port freeze
[ 1.420049] ata3: XXX starting engine
[ 1.420096] ata3: XXX rc=0, class=1
[ 1.420142] ata3: XXX clearing IRQs for thawing
[ 1.420188] ata3: XXX port thawed
[ 1.420234] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
We are not supposed to be able to receive an error IRQ while the port is
frozen (PxIE is set to 0, i.e. all IRQs for the port are disabled).
AHCI 1.3.1 section 10.7.1.1 First Tier (IS Register) states:
"Each bit location can be thought of as reporting a '1' if the virtual
"interrupt line" for that port is indicating it wishes to generate an
interrupt. That is, if a port has one or more interrupt status bit set,
and the enables for those status bits are set, then this bit shall be set."
Additionally, AHCI state P:ComInit clearly shows that the state machine
will only jump to P:ComInitSetIS (which sets IS.IPS(x) to '1'), if PxIE.PCE
is set to '1'. In our case, PxIE is set to 0, so IS.IPS(x) won't get set.
So IS.IPS(x) only gets set if PxIS and PxIE is set.
AHCI 1.3.1 section 10.7.1.1 First Tier (IS Register) also states:
"The bits in this register are read/write clear. It is set by the level of
the virtual interrupt line being a set, and cleared by a write of '1' from
the software."
So if IS.IPS(x) is set, you need to explicitly clear it by writing a 1 to
IS.IPS(x) for that port.
Since PxIE is cleared, the only way to get an interrupt while the port is
frozen, is if IS.IPS(x) is set, and the only way IS.IPS(x) can be set when
the port is frozen, is if it was set before the port was frozen.
However, since commit 737dd811a3db ("ata: libahci: clear pending interrupt
status"), we clear both PxIS and IS.IPS(x) after freezing the port, but
before the COMRESET, so the problem that commit 1e641060c4b5 ("libata:
clear eh_info on reset completion") fixed can no longer happen.
Thus, revert commit 1e641060c4b5 ("libata: clear eh_info on reset
completion"), so that the retry logic in ata_scsi_port_error_handler()
works once again. (The retry logic is still needed, since we can still
get an error IRQ _after_ the port has been thawed, but before
ata_scsi_port_error_handler() takes the ap->lock in order to check
if ATA_PFLAG_EH_PENDING is set.)
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c13e7331745852d0dd7c35eabbe181cbd5b01172 ]
Tags allocated for OPC_INB_SET_CONTROLLER_CONFIG command need to be freed
when we receive the response.
Signed-off-by: Michal Grzedzicki <mge@meta.com>
Link: https://lore.kernel.org/r/20230911170340.699533-2-mge@meta.com
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c2dffda1d8f7511505bbbf16ba282f2079b30089 ]
The latest version of the mlxbf_bootctl driver utilizes
"sysfs_format_mac", and this API is only available if
NET is defined in the kernel configuration. This patch
changes the mlxbf_bootctl Kconfig to depend on NET.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202309031058.JvwNDBKt-lkp@intel.com/
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David Thompson <davthompson@nvidia.com>
Link: https://lore.kernel.org/r/20230905133243.31550-1-davthompson@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 95a404bd60af6c4d9d8db01ad14fe8957ece31ca ]
When iterating over the ring buffer while the ring buffer is active, the
writer can corrupt the reader. There's barriers to help detect this and
handle it, but that code missed the case where the last event was at the
very end of the page and has only 4 bytes left.
The checks to detect the corruption by the writer to reads needs to see the
length of the event. If the length in the first 4 bytes is zero then the
length is stored in the second 4 bytes. But if the writer is in the process
of updating that code, there's a small window where the length in the first
4 bytes could be zero even though the length is only 4 bytes. That will
cause rb_event_length() to read the next 4 bytes which could happen to be off the
allocated page.
To protect against this, fail immediately if the next event pointer is
less than 8 bytes from the end of the commit (last byte of data), as all
events must be a minimum of 8 bytes anyway.
Link: https://lore.kernel.org/all/20230905141245.26470-1-Tze-nan.Wu@mediatek.com/
Link: https://lore.kernel.org/linux-trace-kernel/20230907122820.0899019c@gandalf.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Reported-by: Tze-nan Wu <Tze-nan.Wu@mediatek.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5f9dd2e896a91bfca90f8463eb6808c03d535d8a ]
This patch fixes inconsistencies in the parsing rules of the levels 1
and 2 of the kselftest_deps.sh. It was added the levels 4 and 5 to
account for a few edge cases that are present in some tests, also some
minor identation styling have been fixed (s/ /\t/g).
Signed-off-by: Ricardo B. Marliere <rbmarliere@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f6bd2c92488c30ef53b5bd80c52f0a7eee9d545a ]
When user resize all trace ring buffer through file 'buffer_size_kb',
then in ring_buffer_resize(), kernel allocates buffer pages for each
cpu in a loop.
If the kernel preemption model is PREEMPT_NONE and there are many cpus
and there are many buffer pages to be allocated, it may not give up cpu
for a long time and finally cause a softlockup.
To avoid it, call cond_resched() after each cpu buffer allocation.
Link: https://lore.kernel.org/linux-trace-kernel/20230906081930.3939106-1-zhengyejian1@huawei.com
Cc: <mhiramat@kernel.org>
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f4e4ada586995b17f828c6d147d1800eb1471450 ]
Function instance_set() expects to enable event 'sched_switch', so we
should set 1 to its 'enable' file.
Testcase passed after this patch:
# ./ftracetest test.d/instances/instance-event.tc
=== Ftrace unit tests ===
[1] Test creation and deletion of trace instances while setting an event
[PASS]
# of passed: 1
# of failed: 0
# of unresolved: 0
# of untested: 0
# of unsupported: 0
# of xfailed: 0
# of undefined(test bug): 0
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
