IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
To address IO performance commit f9e5b33934ce
("mmc: host: Improve I/O read/write performance for GL9763E")
limited LPM negotiation to runtime suspend state.
The problem is that it only flips the switch in the runtime PM
resume/suspend logic.
Disable LPM negotiation in gl9763e_add_host.
This helps in two ways:
1. It was found that the LPM switch stays in the same position after
warm reboot. Having it set in init helps with consistency.
2. Disabling LPM during the first runtime resume leaves us susceptible
to the performance issue in the time window between boot and the
first runtime suspend.
Fixes: f9e5b33934ce ("mmc: host: Improve I/O read/write performance for GL9763E")
Cc: stable@vger.kernel.org
Signed-off-by: Kornel Dulęba <korneld@chromium.org>
Reviewed-by: Sven van Ashbrook <svenva@chromium.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20231114115516.1585361-1-korneld@chromium.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
If a task completion notification (TCN) is received when there is no
outstanding task, the cqhci driver issues a "spurious TCN" warning. This
was observed to happen right after CQE error recovery.
When an error interrupt is received the driver runs recovery logic.
It halts the controller, clears all pending tasks, and then re-enables
it. On some platforms, like Intel Jasper Lake, a stale task completion
event was observed, regardless of the CQHCI_CLEAR_ALL_TASKS bit being set.
This results in either:
a) Spurious TC completion event for an empty slot.
b) Corrupted data being passed up the stack, as a result of premature
completion for a newly added task.
Rather than add a quirk for affected controllers, ensure tasks are cleared
by toggling CQHCI_ENABLE, which would happen anyway if
cqhci_clear_all_tasks() timed out. This is simpler and should be safe and
effective for all controllers.
Fixes: a4080225f51d ("mmc: cqhci: support for command queue enabled host")
Cc: stable@vger.kernel.org
Reported-by: Kornel Dulęba <korneld@chromium.org>
Tested-by: Kornel Dulęba <korneld@chromium.org>
Co-developed-by: Kornel Dulęba <korneld@chromium.org>
Signed-off-by: Kornel Dulęba <korneld@chromium.org>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20231103084720.6886-7-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
A correctly operating controller should successfully halt and clear tasks.
Failure may result in errors elsewhere, so promote messages from debug to
warnings.
Fixes: a4080225f51d ("mmc: cqhci: support for command queue enabled host")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20231103084720.6886-6-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Failing to halt complicates the recovery. Additionally, unless the card or
controller are stuck, which is expected to be very rare, then the halt
should succeed, so it is better to wait. Set a large timeout.
Fixes: a4080225f51d ("mmc: cqhci: support for command queue enabled host")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20231103084720.6886-3-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Due to a flaw in the hardware design, the GL9750 replay timer frequently
times out when ASPM is enabled. As a result, the warning messages will
often appear in the system log when the system accesses the GL9750
PCI config. Therefore, the replay timer timeout must be masked.
Fixes: d7133797e9e1 ("mmc: sdhci-pci-gli: A workaround to allow GL9750 to enter ASPM L1.2")
Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Kai-Heng Feng <kai.heng.geng@canonical.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231107095741.8832-2-victorshihgli@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Due to a flaw in the hardware design, the GL9755 replay timer frequently
times out when ASPM is enabled. As a result, the warning messages will
often appear in the system log when the system accesses the GL9755
PCI config. Therefore, the replay timer timeout must be masked.
Fixes: 36ed2fd32b2c ("mmc: sdhci-pci-gli: A workaround to allow GL9755 to enter ASPM L1.2")
Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Kai-Heng Feng <kai.heng.geng@canonical.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231107095741.8832-3-victorshihgli@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
ti,otap-del-sel-legacy/ti,itap-del-sel-legacy passed from DT
are currently ignored for all SD/MMC and eMMC modes. Fix this
by making start loop index to MMC_TIMING_LEGACY.
Fixes: 8ee5fc0e0b3b ("mmc: sdhci_am654: Update OTAPDLY writes")
Signed-off-by: Nitin Yadav <n-yadav@ti.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231026061458.1116276-1-n-yadav@ti.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Merge the mmc fixes for v6.6-rc[n] into the next branch, to allow them to
get tested together with the new mmc changes that are targeted for v6.7.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
For the t7 and older SoC families, the CMD_CFG_ERROR has no effect.
Starting from SoC family C3, setting this bit without SG LINK data
address will cause the controller to generate an IRQ and stop working.
To fix it, don't set the bit CMD_CFG_ERROR anymore.
Fixes: 18f92bc02f17 ("mmc: meson-gx: make sure the descriptor is stopped on errors")
Signed-off-by: Rong Chen <rong.chen@amlogic.com>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231026073156.2868310-1-rong.chen@amlogic.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Use preferred device_get_match_data() instead of of_match_device() to
get the driver match data. With this, adjust the includes to explicitly
include the correct headers.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20231006224343.441720-1-robh@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The devm_platform_ioremap_resource() and platform_get_irq() print
the error messages themselves and our "failed" one brings no value
and just noise. Refactor code to avoid those noisy error messages.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20231006105803.3374241-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The acpi_evaluate_dsm_typed() provides a way to check the type of the
object evaluated by _DSM call. Use it instead of open coded variant.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20231002135103.2602847-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The STM32 SDMMC peripheral (at least for the STM32F429, STM32F469 and
STM32F746, which are all the currently supported devices using periphid
0x00880180) requires DMA to be performed in peripheral flow controller
mode. From the STM32F74/5 reference manual, section 35.3.2:
"SDMMC host allows only to use the DMA in peripheral flow controller
mode. DMA stream used to serve SDMMC must be configured in peripheral
flow controller mode"
This patch adds a variant option to control peripheral flow control and
enables it for the STM32 variant.
Signed-off-by: Ben Wolsieffer <Ben.Wolsieffer@hefring.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230928135644.1489691-1-ben.wolsieffer@hefring.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Merge the mmc fixes for v6.6-rc[n] into the next branch, to allow them to
get tested together with the new mmc changes that are targeted for v6.7.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Before, we used syscon to achieve tuning, but the actual measurement
showed little effect, so the tuning implementation was modified here,
and it was realized by reading and writing the UHS_REG_EXT register.
Signed-off-by: William Qiu <william.qiu@starfivetech.com>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Link: https://lore.kernel.org/r/20230922062834.39212-3-william.qiu@starfivetech.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
By dynamically adjusting the host->hsq_depth, based upon the buffer size
being 4k and that we get at least two I/O write requests in flight, we can
improve the throughput a bit. This is typical for a random I/O write
pattern.
More precisely, by dynamically changing the number of requests in flight
from 2 to 5, we can on some platforms observe ~4-5% increase in throughput.
Signed-off-by: Wenchao Chen <wenchao.chen@unisoc.com>
Link: https://lore.kernel.org/r/20230919074707.25517-3-wenchao.chen@unisoc.com
[Ulf: Re-wrote the commitmsg, minor adjustment to the code - all to clarify.]
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
To allow dynamical updates of the current number of used in-flight
requests, let's move away from using a hard-coded value to a use a
corresponding variable in the struct mmc_host.
This can be valuable when optimizing for certain I/O request sequences, as
shown by subsequent changes.
Signed-off-by: Wenchao Chen <wenchao.chen@unisoc.com>
Link: https://lore.kernel.org/r/20230919074707.25517-2-wenchao.chen@unisoc.com
[Ulf: Re-wrote the commitmsg to clarify the change]
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
When GL9750 enters ASPM L1 sub-states, it will stay at L1.1 and will not
enter L1.2. The workaround is to toggle PM state to allow GL9750 to enter
ASPM L1.2.
Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
Link: https://lore.kernel.org/r/20230912091710.7797-1-victorshihgli@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
for_each_child_of_node performs an of_node_get on each
iteration, so a break out of the loop requires an
of_node_put.
This was done using the Coccinelle semantic patch
iterators/for_each_child.cocci
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Link: https://lore.kernel.org/r/20230907095521.14053-6-Julia.Lawall@inria.fr
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
MMC_SDHI_INTERNAL_DMAC config option has dependency on ARM64 and
R7S9210/R8A77470 this dependency will keep growing for future SoCs for
varying architectures. So to simplify this configuration make
MMC_SDHI_INTERNAL_DMAC solely depend on ARCH_RENESAS, as all Renesas
SoCs inherently depend on the ARCH_RENESAS config option.
This allows selecting MMC_SDHI_INTERNAL_DMAC config option for RZ/Five SoC
which is based on RISC-V architecture.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20230901122701.318082-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Current manual tuning logic only get the first pass window, but
this pass window maybe not the best pass window.
Now find all the pass window, and chose the largest pass window,
and use the average value of this largest pass window to get the
best timing.
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20230831032647.3128702-1-haibo.chen@nxp.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
To improve the r/w performance of GL9763E, the current driver inhibits LPM
negotiation while the device is active.
This prevents a large number of SoCs from suspending, notably x86 systems
which commonly use S0ix as the suspend mechanism - for example, Intel
Alder Lake and Raptor Lake processors.
Failure description:
1. Userspace initiates s2idle suspend (e.g. via writing to
/sys/power/state)
2. This switches the runtime_pm device state to active, which disables
LPM negotiation, then calls the "regular" suspend callback
3. With LPM negotiation disabled, the bus cannot enter low-power state
4. On a large number of SoCs, if the bus not in a low-power state, S0ix
cannot be entered, which in turn prevents the SoC from entering
suspend.
Fix by re-enabling LPM negotiation in the device's suspend callback.
Suggested-by: Stanislaw Kardach <skardach@google.com>
Fixes: f9e5b33934ce ("mmc: host: Improve I/O read/write performance for GL9763E")
Cc: stable@vger.kernel.org
Signed-off-by: Sven van Ashbrook <svenva@chromium.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20230831160055.v3.1.I7ed1ca09797be2dd76ca914c57d88b32d24dac88@changeid
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Summary of the changes worth highlighting from most interesting to boring below:
* Christoph Hellwig's symbol_get() fix to Nvidia's efforts to circumvent the
protection he put in place in year 2020 to prevent proprietary modules from
using GPL only symbols, and also ensuring proprietary modules which export
symbols grandfather their taint. That was done through year 2020 commit
262e6ae7081d ("modules: inherit TAINT_PROPRIETARY_MODULE"). Christoph's new
fix is done by clarifing __symbol_get() was only ever intended to prevent
module reference loops by Linux kernel modules and so making it only find
symbols exported via EXPORT_SYMBOL_GPL(). The circumvention tactic used
by Nvidia was to use symbol_get() to purposely swift through proprietary
module symbols and completley bypass our traditional EXPORT_SYMBOL*()
annotations and community agreed upon restrictions.
A small set of preamble patches fix up a few symbols which just needed
adjusting for this on two modules, the rtc ds1685 and the networking enetc
module. Two other modules just needed some build fixing and removal of use
of __symbol_get() as they can't ever be modular, as was done by Arnd on
the ARM pxa module and Christoph did on the mmc au1xmmc driver.
This is a good reminder to us that symbol_get() is just a hack to address
things which should be fixed through Kconfig at build time as was done in
the later patches, and so ultimately it should just go.
* Extremely late minor fix for old module layout 055f23b74b20 ("module: check
for exit sections in layout_sections() instead of module_init_section()") by
James Morse for arm64. Note that this layout thing is old, it is *not*
Song Liu's commit ac3b43283923 ("module: replace module_layout with
module_memory"). The issue however is very odd to run into and so there was
no hurry to get this in fast.
* Although the fix did not go through the modules tree I'd like to highlight
the fix by Peter Zijlstra in commit 54097309620e ("x86/static_call: Fix
__static_call_fixup()") now merged in your tree which came out of what
was originally suspected to be a fallout of the the newer module layout
changes by Song Liu commit ac3b43283923 ("module: replace module_layout
with module_memory") instead of module_init_section()"). Thanks to the report
by Christian Bricart and the debugging by Song Liu & Peter that turned to
be noted as a kernel regression in place since v5.19 through commit
ee88d363d156 ("x86,static_call: Use alternative RET encoding").
I highlight this to reflect and clarify that we haven't seen more fallout
from ac3b43283923 ("module: replace module_layout with module_memory").
* RISC-V toolchain got mapping symbol support which prefix symbols with "$"
to help with alignment considerations for disassembly. This is used to
differentiate between incompatible instruction encodings when disassembling.
RISC-V just matches what ARM/AARCH64 did for alignment considerations and
Palmer Dabbelt extended is_mapping_symbol() to accept these symbols for
RISC-V. We already had support for this for all architectures but it also
checked for the second character, the RISC-V check Dabbelt added was just
for the "$". After a bit of testing and fallout on linux-next and based on
feedback from Masahiro Yamada it was decided to simplify the check and treat
the first char "$" as unique for all architectures, and so we no make
is_mapping_symbol() for all archs if the symbol starts with "$".
The most relevant commit for this for RISC-V on binutils was:
https://sourceware.org/pipermail/binutils/2021-July/117350.html
* A late fix by Andrea Righi (today) to make module zstd decompression use
vmalloc() instead of kmalloc() to account for large compressed modules. I
suspect we'll see similar things for other decompression algorithms soon.
* samples/hw_breakpoint minor fixes by Rong Tao, Arnd Bergmann and Chen Jiahao
-----BEGIN PGP SIGNATURE-----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=IQy2
-----END PGP SIGNATURE-----
Merge tag 'modules-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull modules updates from Luis Chamberlain:
"Summary of the changes worth highlighting from most interesting to
boring below:
- Christoph Hellwig's symbol_get() fix to Nvidia's efforts to
circumvent the protection he put in place in year 2020 to prevent
proprietary modules from using GPL only symbols, and also ensuring
proprietary modules which export symbols grandfather their taint.
That was done through year 2020 commit 262e6ae7081d ("modules:
inherit TAINT_PROPRIETARY_MODULE"). Christoph's new fix is done by
clarifing __symbol_get() was only ever intended to prevent module
reference loops by Linux kernel modules and so making it only find
symbols exported via EXPORT_SYMBOL_GPL(). The circumvention tactic
used by Nvidia was to use symbol_get() to purposely swift through
proprietary module symbols and completely bypass our traditional
EXPORT_SYMBOL*() annotations and community agreed upon
restrictions.
A small set of preamble patches fix up a few symbols which just
needed adjusting for this on two modules, the rtc ds1685 and the
networking enetc module. Two other modules just needed some build
fixing and removal of use of __symbol_get() as they can't ever be
modular, as was done by Arnd on the ARM pxa module and Christoph
did on the mmc au1xmmc driver.
This is a good reminder to us that symbol_get() is just a hack to
address things which should be fixed through Kconfig at build time
as was done in the later patches, and so ultimately it should just
go.
- Extremely late minor fix for old module layout 055f23b74b20
("module: check for exit sections in layout_sections() instead of
module_init_section()") by James Morse for arm64. Note that this
layout thing is old, it is *not* Song Liu's commit ac3b43283923
("module: replace module_layout with module_memory"). The issue
however is very odd to run into and so there was no hurry to get
this in fast.
- Although the fix did not go through the modules tree I'd like to
highlight the fix by Peter Zijlstra in commit 54097309620e
("x86/static_call: Fix __static_call_fixup()") now merged in your
tree which came out of what was originally suspected to be a
fallout of the the newer module layout changes by Song Liu commit
ac3b43283923 ("module: replace module_layout with module_memory")
instead of module_init_section()"). Thanks to the report by
Christian Bricart and the debugging by Song Liu & Peter that turned
to be noted as a kernel regression in place since v5.19 through
commit ee88d363d156 ("x86,static_call: Use alternative RET
encoding").
I highlight this to reflect and clarify that we haven't seen more
fallout from ac3b43283923 ("module: replace module_layout with
module_memory").
- RISC-V toolchain got mapping symbol support which prefix symbols
with "$" to help with alignment considerations for disassembly.
This is used to differentiate between incompatible instruction
encodings when disassembling. RISC-V just matches what ARM/AARCH64
did for alignment considerations and Palmer Dabbelt extended
is_mapping_symbol() to accept these symbols for RISC-V. We already
had support for this for all architectures but it also checked for
the second character, the RISC-V check Dabbelt added was just for
the "$". After a bit of testing and fallout on linux-next and based
on feedback from Masahiro Yamada it was decided to simplify the
check and treat the first char "$" as unique for all architectures,
and so we no make is_mapping_symbol() for all archs if the symbol
starts with "$".
The most relevant commit for this for RISC-V on binutils was:
https://sourceware.org/pipermail/binutils/2021-July/117350.html
- A late fix by Andrea Righi (today) to make module zstd
decompression use vmalloc() instead of kmalloc() to account for
large compressed modules. I suspect we'll see similar things for
other decompression algorithms soon.
- samples/hw_breakpoint minor fixes by Rong Tao, Arnd Bergmann and
Chen Jiahao"
* tag 'modules-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
module/decompress: use vmalloc() for zstd decompression workspace
kallsyms: Add more debug output for selftest
ARM: module: Use module_init_layout_section() to spot init sections
arm64: module: Use module_init_layout_section() to spot init sections
module: Expose module_init_layout_section()
modules: only allow symbol_get of EXPORT_SYMBOL_GPL modules
rtc: ds1685: use EXPORT_SYMBOL_GPL for ds1685_rtc_poweroff
net: enetc: use EXPORT_SYMBOL_GPL for enetc_phc_index
mmc: au1xmmc: force non-modular build and remove symbol_get usage
ARM: pxa: remove use of symbol_get()
samples/hw_breakpoint: mark sample_hbp as static
samples/hw_breakpoint: fix building without module unloading
samples/hw_breakpoint: Fix kernel BUG 'invalid opcode: 0000'
modpost, kallsyms: Treat add '$'-prefixed symbols as mapping symbols
kernel: params: Remove unnecessary ‘0’ values from err
module: Ignore RISC-V mapping symbols too
The polarity of the card detection gpio is handled by the "cd-inverted"
property in the device tree. Move this inversion logic to gpiolib to avoid
reading the gpio raw value.
Signed-off-by: Balamanikandan Gunasundar <balamanikandan.gunasundar@microchip.com>
Suggested-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230825095157.76073-4-balamanikandan.gunasundar@microchip.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Move the contents of linux/atmel-mci.h into
drivers/mmc/host/atmel-mci.c as it is only used in one file
Signed-off-by: Balamanikandan Gunasundar <balamanikandan.gunasundar@microchip.com>
Reviewed-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Link: https://lore.kernel.org/r/20230825095157.76073-3-balamanikandan.gunasundar@microchip.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Replace the legacy GPIO APIs with gpio descriptor consumer interface.
To maintain backward compatibility, we rely on the "cd-inverted"
property to manage the invertion flag instead of GPIO property.
Signed-off-by: Balamanikandan Gunasundar <balamanikandan.gunasundar@microchip.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230825095157.76073-2-balamanikandan.gunasundar@microchip.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
First of all, Unisoc's IC provides cmd delay and read delay to ensure
that the host can get the correct data. However, according to SD Spec,
there is no need to do tuning in high speed mode, but with the
development of chip processes, it is more and more difficult to find
a suitable delay to cover all the chips. Therefore, we need SD high
speed mode online tuning.
In addition, we added mmc_sd_switch() and mmc_send_status() to the
header file to allow it to be usable by the driver.
Signed-off-by: Wenchao Chen <wenchao.chen@unisoc.com>
Link: https://lore.kernel.org/r/20230825091743.15613-3-wenchao.chen@unisoc.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This commit implements the runtime PM operations to disable eMMC card clock
when idle.
Reviewed-by: David Thompson <davthompson@nvidia.com>
Signed-off-by: Liming Sun <limings@nvidia.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20230822195929.168552-2-limings@nvidia.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This commit adds handling in dwcmshc_resume() for different error
cases.
Signed-off-by: Liming Sun <limings@nvidia.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20230822195929.168552-1-limings@nvidia.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Errata ERR010450 only shows up if voltage is 1.8V, but if the device is
supplied by 3v3 the errata can be ignored. So let's check for if quirk
SDHCI_QUIRK2_NO_1_8_V is defined or not before limiting the frequency.
Cc: Jim Reinhart <jimr@tekvox.com>
Cc: James Autry <jautry@tekvox.com>
Cc: Matthew Maron <matthewm@tekvox.com>
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Acked-by: Haibo Chen <haibo.chen@nxp.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20230811214853.8623-1-giulio.benetti@benettiengineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Now that sdhci_pltfm_unregister() has been removed, rename
sdhci_pltfm_register() to sdhci_pltfm_init_and_add_host() to better
reflect what it does.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230811130351.7038-17-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Now that sdhci_pltfm_unregister() is unused, remove it.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230811130351.7038-16-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Use sdhci_pltfm_remove() instead of sdhci_pltfm_unregister() because
sdhci_pltfm_unregister() is going to be removed.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230811130351.7038-15-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Use sdhci_pltfm_remove() instead of sdhci_pltfm_unregister() so that
devm_clk_get_enabled() can be used for pltfm_host->clk.
This has the side effect that the order of operations on the error path
and remove path is not the same as it was before, but should be safe
nevertheless.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230811130351.7038-14-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Use sdhci_pltfm_remove() instead of sdhci_pltfm_unregister() so that
devm_clk_get_enabled() can be used for pltfm_host->clk.
This has the side effect that the order of operations on the error path
and remove path is not the same as it was before, but should be safe
nevertheless.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230811130351.7038-13-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Use sdhci_pltfm_remove() instead of sdhci_pltfm_unregister() because
sdhci_pltfm_unregister() is going to be removed.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230811130351.7038-12-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Use sdhci_pltfm_remove() instead of sdhci_pltfm_unregister() because
sdhci_pltfm_unregister() is going to be removed.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230811130351.7038-11-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Use sdhci_pltfm_remove() instead of sdhci_pltfm_unregister() because
sdhci_pltfm_unregister() is going to be removed.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230811130351.7038-10-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Use sdhci_pltfm_remove() instead of sdhci_pltfm_unregister() because
sdhci_pltfm_unregister() is going to be removed.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230811130351.7038-9-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Use sdhci_pltfm_remove() instead of sdhci_pltfm_unregister() so that
devm_clk_get_enabled() can be used for pltfm_host->clk.
This has the side effect that the order of operations on the error path
and remove path is not the same as it was before, but should be safe
nevertheless.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230811130351.7038-8-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Use sdhci_pltfm_remove() instead of sdhci_pltfm_unregister() because
sdhci_pltfm_unregister() is going to be removed.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230811130351.7038-7-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Use sdhci_pltfm_remove() instead of sdhci_pltfm_unregister() so that
devm_clk_get_enabled() can be used for pltfm_host->clk.
This has the side effect that the order of operations on the error path
and remove path is not the same as it was before, but should be safe
nevertheless.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230811130351.7038-6-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
