IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Some devices do not support delta angle and delta velocity
burst readings, which means there should be no buffer support
for these types of channels.
A new list of channels is created which contains the delta
channels structures with the scan index equal to -1 to allow
for raw register readings, without buffer support.
This list of channels is assigned to the devices which
do not support delta angle and delta velocity burst
readings.
Fixes: 8f6bc87d67c0 ("iio: imu: adis16475.c: Add delta angle and delta velocity channels")
Signed-off-by: Ramona Gradinariu <ramona.gradinariu@analog.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20231012122456.765709-2-ramona.gradinariu@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add the mount-matrix optional property to the binding since it's supported
and very useful when using the chip on a board.
Signed-off-by: Martin Kepplinger <martink@posteo.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20231012142041.253332-1-martink@posteo.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
To be consistent with the rest of iio, remove of_match_ptr(). It does
not do anything useful here.
Suggested-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20231012-ad2s1210-mainline-v1-2-b2ee31c0e9dd@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The DRV_NAME macro is only used in one place in the ad2s1210 driver and
is not really needed so let's remove it.
Suggested-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20231012-ad2s1210-mainline-v1-1-b2ee31c0e9dd@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
When a software reset is performed on the AD2S1210 to make the selected
excitation frequency take effect, it always triggers faults on the
input signals because the output signal is interrupted momentarily.
So we need to clear the faults after the software reset to avoid
triggering fault events the next time a sample is read.
The datasheet specifies a time t[track] in Table 27 that specifies the
settle time in milliseconds after a reset depending on the selected
resolution. This is used in the driver to add an appropriate delay.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20231010-ad2s1210-mainline-v5-2-35a0f6ffa04a@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This refactors the sample line toggle in the ad2s1210 resolver driver
to a separate function. The sample has some timing requirements, so
this ensures that it is always done the same way, both in the existing
call sites and any future usage.
Previously, the sample line was kept on for the duration of the read,
but this is not necessary. Data is latched in on the rising edge and
after the specified delay the state of the sample line does not matter.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20231010-ad2s1210-mainline-v5-1-35a0f6ffa04a@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Faults have been converted to events and we are now polling the fault
register each time we read a sample, so we no longer need the fault
attribute.
This attribute was not suitable for promotion out of staging anyway
since it was returning multiple values in a single attribute.
The fault clearing feature should not be needed unless we need to
support the fault output pins on the chip which is not currently
supported. So we can add this feature back in if we need it later.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20231005-ad2s1210-mainline-v4-16-ec00746840fc@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The ad2s1210 resolver driver has quite a few channels, mostly for
internal signals for event support. This makes it difficult to know
which channel is which. This patch adds a label attribute to the
channels to make it easier to identify them.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20231005-ad2s1210-mainline-v4-15-ec00746840fc@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The ad2s1210 driver shoe-horns the register and fault support into IIO
events. The mapping between the registers/faults and the events is not
obvious. To save users from having to read the entire driver to figure
out how to use it, add a summary of the register/fault support to the
top of the file.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20231005-ad2s1210-mainline-v4-14-ec00746840fc@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
When reading the position and velocity on the AD2S1210, there is also a
3rd byte following the two data bytes that contains the fault flag bits.
This patch adds support for reading this byte and generating events when
faults occur.
The faults are mapped to various channels and event type in order to
have a unique event for each fault.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20231005-ad2s1210-mainline-v4-13-ec00746840fc@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This adds a new optional field to struct iio_info to allow drivers to
specify a label for the event. This is useful for cases where there are
many events or the event attribute name is not descriptive enough or
where an event doesn't have any other attributes.
The implementation is based on the existing label support for channels.
So either all events of a device have a label attribute or none do.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20231005-ad2s1210-mainline-v4-12-ec00746840fc@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The AD2S1210 has a programmable threshold for the degradation of signal
(DOS) mismatch fault. This fault is triggered when the difference in
amplitude between the sine and cosine inputs exceeds the threshold.
The DOS reset min/max registers on the chip provide initial values
for internal tracking of the min/max of the monitor signal after the
fault register is cleared.
This patch converts the custom device DOS reset min/max threshold
attributes custom event attributes on the monitor signal channel.
The attributes now use millivolts instead of the raw register value in
accordance with the IIO ABI.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20231005-ad2s1210-mainline-v4-11-ec00746840fc@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The AD2S1210 has a programmable threshold for the degradation of signal
(DOS) mismatch fault. This fault is triggered when the difference in
voltage between the sine and cosine inputs exceeds the threshold. In
other words, when the magnitude of sine and cosine inputs are equal,
the AC component of the monitor signal is zero and when the magnitudes
of the sine and cosine inputs are not equal, the AC component of the
monitor signal is the difference between the sine and cosine inputs.
So the fault occurs when the magnitude of the AC component of the
monitor signal exceeds the DOS mismatch threshold voltage.
This patch converts the custom device DOS mismatch threshold attribute
to an event magnitude attribute on the monitor signal channel.
The attribute now uses millivolts instead of the raw register value in
accordance with the IIO ABI.
Emitting the event will be implemented in a later patch.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20231005-ad2s1210-mainline-v4-10-ec00746840fc@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The AD2S1210 has a programmable threshold for the degradation of signal
(DOS) overrange fault. This fault is triggered when either the sine or
cosine input rises above the threshold voltage.
This patch converts the custom device DOS overrange threshold attribute
to an event rising edge threshold attribute on the monitor signal
channel.
The attribute now uses millivolts instead of the raw register value in
accordance with the IIO ABI.
Emitting the event will be implemented in a later patch.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20231005-ad2s1210-mainline-v4-9-ec00746840fc@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The AD2S1210 has a programmable threshold for the loss of signal (LOS)
fault. This fault is triggered when either the sine or cosine input
falls below the threshold voltage.
This patch converts the custom device LOS threshold attribute to an
event falling edge threshold attribute on a new monitor signal channel.
The monitor signal is an internal signal that combines the amplitudes
of the sine and cosine inputs as well as the current angle and position
output. This signal is used to detect faults in the input signals.
The attribute now uses millivolts instead of the raw register value in
accordance with the IIO ABI.
Emitting the event will be implemented in a later patch.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20231005-ad2s1210-mainline-v4-8-ec00746840fc@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The AD2S1210 monitors the internal error signal (difference between
estimated angle and measured angle) to determine a loss of position
tracking (LOT) condition. When the error value exceeds a threshold, a
fault is triggered. This threshold is user-configurable.
This patch converts the custom lot_high_thrd and lot_low_thrd attributes
in the ad2s1210 driver to standard event attributes. This will allow
tooling to be able to expose these in a generic way.
Since the low threshold determines the hysteresis, it requires some
special handling to expose the difference between the high and low
register values as the hysteresis instead of exposing the low register
value directly.
The attributes also return the values in radians now as required by the
ABI.
Actually emitting the fault event will be done in a later patch.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20231005-ad2s1210-mainline-v4-7-ec00746840fc@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The AD2S1210 chip has a phase lock range feature that allows selecting
the allowable phase difference between the excitation output and the
sine and cosine inputs. This can be set to either 44 degrees (default)
or 360 degrees.
This patch adds a new phase channel with a phase0_mag_rising event that
can be used to configure the phase lock range. Actually emitting the
event will be added in a subsequent patch.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20231005-ad2s1210-mainline-v4-5-ec00746840fc@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Selecting the resolution was implemented as the `bits` sysfs attribute.
However, the selection of the resolution depends on how the hardware
is wired and the specific application, so this is rather a job for
devicetree to describe.
A new devicetree property `assigned-resolution-bits` to specify the
resolution required for each chip is added and the `bits` sysfs
attribute is removed.
Since the resolution is now supplied by a devicetree property, the
resolution-gpios are now optional and we can allow for the case where
the resolution pins on the AD2S1210 are hard-wired instead of requiring
them to be connected to gpios.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20231005-ad2s1210-mainline-v4-4-ec00746840fc@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The ad2s1210 driver has a device-specific attribute `fexcit` for setting
the frequency of the excitation output. This converts it to a channel in
order to use standard IIO ABI.
The excitation frequency is an analog output that generates a sine wave.
Only the frequency is configurable. According to the datasheet, the
specified range of the excitation frequency is from 2 kHz to 20 kHz and
can be set in increments of 250 Hz.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20231005-ad2s1210-mainline-v4-3-ec00746840fc@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The AD2S1210 resolver has a hysteresis feature that can be used to
prevent flicker in the LSB of the position register. This can be either
enabled or disabled. Disabling hysteresis is useful for increasing
precision by oversampling.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20231005-ad2s1210-mainline-v4-2-ec00746840fc@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
When reading registers on the AD2S1210 chip, we have to supply a "dummy"
address for the second SPI tx byte so that we don't accidentally write
to a register. This register will be read and the value discarded on the
next regmap read or write call.
Reading the fault register has a side-effect of clearing the faults
so we should not use this register for the dummy read.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20231005-ad2s1210-mainline-v4-1-ec00746840fc@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Commit a2d518fbe376 ("iio: adc: mt6577_auxadc: Simplify with device managed function")
simplified the driver with devm hooks, but wrongly states that the
platform_set_drvdata(), platform_get_drvdata() are unused after the
simplification: the driver data is infact used in .suspend() and
.resume() PM callbacks, currently producing a kernel panic.
Reintroduce the call to platform_set_drvdata() in the probe function
Fixes: a2d518fbe376 ("iio: adc: mt6577_auxadc: Simplify with device managed function")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Markus Schneider-Pargmann <msp@baylibre.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://lore.kernel.org/r/20231010121940.159696-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add fast settling mode support for AD7193.
Add two new device specific attributes: oversampling_ratio and
oversampling_ratio_available.
For AD7193 the user can set the average factor by writing to
oversampling_ratio. The possible values are exposed when reading
oversampling_ratio_available.
Signed-off-by: Alisa-Dariana Roman <alisa.roman@analog.com>
Link: https://lore.kernel.org/r/20231010124927.143343-4-alisadariana@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reverted as Rob Herring is tracking undocumented compatibles and as per
discussion in the thread, we can not remove this deprecated compatibles from
the driver without potential/likely regressions. So keep it around
as it's not that painful anyway.
This reverts commit 711fb79a1ea8e79dc600f25d9f8c1ac25870b4de.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The iio_generic_buffer can return garbage values when the total size of
scan data is not a multiple of the largest element in the scan. This can be
demonstrated by reading a scan, consisting, for example of one 4-byte and
one 2-byte element, where the 4-byte element is first in the buffer.
The IIO generic buffer code does not take into account the last two
padding bytes that are needed to ensure that the 4-byte data for next
scan is correctly aligned.
Add the padding bytes required to align the next sample with the scan size.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Fixes: e58537ccce73 ("staging: iio: update example application.")
Link: https://lore.kernel.org/r/ZRvlm4ktNLu+qmlf@dc78bmyyyyyyyyyyyyydt-3.rev.dnainternet.fi
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Explicity specify array indices to fix mapping between
asahi_compass_chipset and ak_def_array.
While at it, remove unneeded AKXXXX.
Fixes: 4f9ea93afde1 ("iio: magnetometer: ak8975: Convert enum->pointer for data in the match tables")
Signed-off-by: André Apitzsch <git@apitzsch.eu>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20231001-ak_magnetometer-v1-1-09bf3b8798a3@apitzsch.eu
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This adds new DeviceTree bindings for the Analog Devices, Inc. AD2S1210
resolver-to-digital converter.
Co-developed-by: Apelete Seketeli <aseketeli@baylibre.com>
Signed-off-by: Apelete Seketeli <aseketeli@baylibre.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230929-ad2s1210-mainline-v3-1-fa4364281745@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
strncpy() is deprecated for use on NUL-terminated destination strings [1].
We should prefer more robust and less ambiguous string interfaces.
We expect adc->chan_name[val] to be NUL-terminated based on ch_name's
use within functions that expect NUL-terminated strings like strncmp and
printf-likes:
| if (!strncmp(stm32_adc_ic[i].name, ch_name, STM32_ADC_CH_SZ)) {
| /* Check internal channel availability */
| switch (i) {
| case STM32_ADC_INT_CH_VDDCORE:
| if (!adc->cfg->regs->or_vddcore.reg)
| dev_warn(&indio_dev->dev,
| "%s channel not available\n", ch_name);
...
There is no evidence that NUL-padding is needed either.
Considering the above, a suitable replacement is strscpy() [2] due to
the fact that it guarantees NUL-termination on the destination buffer
without unnecessarily NUL-padding. If, for any reason, NUL-padding _is_
required we should go for `strscpy_pad`.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230921-strncpy-drivers-iio-adc-stm32-adc-c-v1-1-c50eca098597@google.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
dt-bindings: iio: Add KX132ACR-LBZ accelerometer
ROHM KX132ACR-LBZ is an accelerometer for industrial applications. It
has a subset of KX022A functionalities, dropping support for tap, free
fall and tilt detection engines. Also, the register interface is an exact
subset of what is found on KX022A (except the WHO_AM_I register value).
Add support for KX132ACR-LBZ.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/272065b9f35b817aff86b7760ff1aaaaaaa969f5.1695879676.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
ROHM KX132ACR-LBZ is an accelerometer for industrial applications. It
has a subset of KX022A functionalities, dropping support for tap, free
fall and tilt detection engines. Also, the register interface is an exact
subset of what is found on KX022A.
Extend the kionix,kx022a.yaml file to support the KX132ACR-LBZ device
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/5c9e03ffad5e6e5970d6e71fb02eab4b652e109f.1695879676.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Instead of using the f_order member of ad7192_state, a function that
computes the f_order coefficient makes more sense. This coefficient is a
function of the sinc filter and chop filter states.
Remove f_order member of ad7192_state structure. Instead use
ad7192_compute_f_order function to compute the f_order coefficient
according to the sinc filter and chop filter states passed as
parameters.
Add ad7192_get_f_order function that returns the current f_order
coefficient of the device.
Add ad7192_compute_f_adc function that computes the f_adc value
according to the sinc filter and chop filter states passed as
parameters.
Add ad7192_get_f_adc function that returns the current f_adc value of
the device.
Signed-off-by: Alisa-Dariana Roman <alisa.roman@analog.com>
Link: https://lore.kernel.org/r/20230924215148.102491-3-alisadariana@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Include bitfield.h and update driver to use bitfield access macros GENMASK,
FIELD_PREP and FIELD_GET.
Remove old macros in favor of using FIELD_PREP and masks.
Change %d to %ld to match the type of FIELD_GET().
Signed-off-by: Alisa-Dariana Roman <alisa.roman@analog.com>
Link: https://lore.kernel.org/r/20230924215148.102491-2-alisadariana@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Support for the ROHM BM1390 pressure sensor. The BM1390GLV-Z can measure
pressures ranging from 300 hPa to 1300 hPa with configurable measurement
averaging and internal FIFO. The sensor does also provide temperature
measurements.
Sensor does also contain IIR filter implemented in HW. The data-sheet
says the IIR filter can be configured to be "weak", "middle" or
"strong". Some RMS noise figures are provided in data sheet but no
accurate maths for the filter configurations is provided. Hence, the IIR
filter configuration is not supported by this driver and the filter is
configured to the "middle" setting (at least not for now).
The FIFO measurement mode is only measuring the pressure and not the
temperature. The driver measures temperature when FIFO is flushed and
simply uses the same measured temperature value to all reported
temperatures. This should not be a problem when temperature is not
changing very rapidly (several degrees C / second) but allows users to
get the temperature measurements from sensor without any additional logic.
This driver allows the sensor to be used in two muitually exclusive ways,
1. With trigger (data-ready IRQ).
In this case the FIFO is not used as we get data ready for each collected
sample. Instead, for each data-ready IRQ we read the sample from sensor
and push it to the IIO buffer.
2. With hardware FIFO and watermark IRQ.
In this case the data-ready is not used but we enable watermark IRQ. At
each watermark IRQ we go and read all samples in FIFO and push them to the
IIO buffer.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/4f23211e3cf248f9f48ddb2a752387bb00e9c2c4.1695727471.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
BM1390GLV-Z is a pressure sensor which performs internal temperature
compensation for the MEMS. Pressure range is from 300 hPa to 1300 hPa
and sample averaging and IIR filtering is built in sensor. Temperature
measurement is also supported.
Add dt-bindings for the sensor.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/08796e6b28d2c67933b1a1a5eca0f43da322a597.1695727471.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The available_scan_mask is an array of bitmaps representing the channels
which can be simultaneously enabled by the driver. In many cases, the
hardware can offer more channels than what the user is interested in
obtaining. In such cases, it may be preferred that only a subset of
channels are enabled, and the driver reads only a subset of the channels
from the hardware.
Some devices can't support all channel combinations. For example, the
BM1390 pressure sensor must always read the pressure data in order to
acknowledge the watermark IRQ, while reading temperature can be omitted.
So, the available scan masks would be 'pressure and temperature' and
'pressure only'.
When IIO searches for the scan mask it asks the driver to use, it will
pick the first suitable one from the 'available_scan_mask' array. Hence,
ordering the masks in the array makes a difference. We should 'prefer'
reading just the pressure from the hardware (as it is a cheaper operation
than reading both pressure and temperature) over reading both pressure
and temperature. Hence, we should set the 'only pressure' as the first
scan mask in available_scan_mask array. If we set the 'pressure and
temperature' as first in the array, then the 'only temperature' will never
get used as 'pressure and temperature' can always serve the user's
needs.
Add (minimal) kerneldoc to the 'available_scan_mask' to hint the user
that the ordering of masks matters.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/4e43bf0186df5c8a56b470318b4827605f9cad6c.1695727471.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Some boards fail in magnetometer probe if level shifter flag is not set,
definition was found in the vendor Linux kernel v3.0.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Link: https://lore.kernel.org/r/20230927173245.2151083-3-andreas@kemnade.info
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add a level shifter flag as found in ancient platform data struct:
level_shifter: 0: VLogic, 1: VDD
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Link: https://lore.kernel.org/r/20230927173245.2151083-2-andreas@kemnade.info
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The temperature channel has 16-bit storage size. We need to perform
the padding to have the buffer elements naturally aligned in case
the temperature channel is enabled and there are any 32-bit storage
size channels enabled which have a scan index higher than the
temperature channel scan index.
Fixes: 8f6bc87d67c0 ("iio: imu: adis16475.c: Add delta angle and delta velocity channels")
Signed-off-by: Ramona Gradinariu <ramona.gradinariu@analog.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20230926085721.645687-2-ramona.gradinariu@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This modifies the ad2s1210_show_fexcit() function to read the excitation
frequency from the control register. This way we don't have to keep
track of the value and don't risk returning a stale value.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20230929-ad2s1210-mainline-v3-16-fa4364281745@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This combines the ad2s1210_update_frequency_control_word() and
ad2s1210_soft_reset() functions into a single function since they
both have to be called together. (The software reset does not reset
any configuration registers, it only updates the excitation output
and resets the tracking loop.)
Also clean up a few things while touching this:
- move AD2S1210_DEF_EXCIT macro with similar macros
- remove unnecessary dev_err() calls
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20230929-ad2s1210-mainline-v3-15-fa4364281745@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
