IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
[ Upstream commit 98dcc6be3859fb15257750b8e1d4e0eefd2c5e1e ]
According to the TRM there are no specific gpll_peri, cpll_peri,
gpll_div2_peri or gpll_div3_peri gates, but a single clk_peri_src gate.
Instead mux_clk_peri_src directly connects to the plls respectively the pll
divider clocks.
Fix this by creating a single gated composite.
Also rename all occurrences of aclk_peri_src to clk_peri_src, since it
is the parent for peri aclks, pclks and hclks. That name also matches
the one used in the TRM.
Fixes: f6022e88faca ("clk: rockchip: add clock controller for rk3128")
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
[renamed aclk_peri_src -> clk_peri_src and added commit message]
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Link: https://lore.kernel.org/r/20231127181415.11735-4-knaerzche@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 06f76e464ac81c6915430b7155769ea4ef16efe4 ]
The lowest supported clock frequency of the PHY is 125MHz (see also
mtk_mipi_tx_pll_enable()), but the clamping in .round_rate() has the
wrong minimal value, which will make the .enable() op return -EINVAL on
low frequencies. Fix the minimal clamping value.
Fixes: efda51a58b4a ("drm/mediatek: add mipi_tx driver for mt8183")
Signed-off-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231123110202.2025585-1-mwalle@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e645c20e8e9cde549bc233435d3c1338e1cd27fe ]
The enforce_cache_coherency callback ensures DMA cache coherency for
devices attached to the domain.
Intel IOMMU supports enforced DMA cache coherency when the Snoop
Control bit in the IOMMU's extended capability register is set.
Supporting it differs between legacy and scalable modes.
In legacy mode, it's supported page-level by setting the SNP field
in second-stage page-table entries. In scalable mode, it's supported
in PASID-table granularity by setting the PGSNP field in PASID-table
entries.
In legacy mode, mappings before attaching to a device have SNP
fields cleared, while mappings after the callback have them set.
This means partial DMAs are cache coherent while others are not.
One possible fix is replaying mappings and flipping SNP bits when
attaching a domain to a device. But this seems to be over-engineered,
given that all real use cases just attach an empty domain to a device.
To meet practical needs while reducing mode differences, only support
enforce_cache_coherency on a domain without mappings if SNP field is
used.
Fixes: fc0051cb9590 ("iommu/vt-d: Check domain force_snooping against attached devices")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20231114011036.70142-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1cd2fe4fd63e54b799a68c0856bda18f2e40caa8 ]
assign_bit() expects a bit number and not a mask like BIT(x). Hence,
just remove the BIT() macro from the #defines.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/r/202311060647.i9XyO4ej-lkp@intel.com/
Fixes: fff7352bf7a3ce ("iio: imu: Add support for adis16475")
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20231106150730.945-1-nuno.sa@analog.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit be37542afbfcd27b3bb99a135abf9b4736b96f75 ]
AM62Ax has 3 SPI channels where each channel has 4x TX and 4x RX
threads. Also fix the thread numbers to match what the firmware expects
according to the PSI-L device description.
Link: http://downloads.ti.com/tisci/esd/latest/5_soc_doc/am62ax/psil_cfg.html [1]
Fixes: aac6db7e243a ("dmaengine: ti: k3-psil-am62a: Add AM62Ax PSIL and PDMA data")
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Link: https://lore.kernel.org/r/20231123-psil_fix-v1-1-6604d80819be@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 744f5e7b69710701dc225020769138f8ca2894df ]
AM62x has 3 SPI channels where each channel has 4 TX and 4 RX threads.
This also fixes the thread numbers.
Signed-off-by: Ronald Wahl <ronald.wahl@raritan.com>
Fixes: 5ac6bfb58777 ("dmaengine: ti: k3-psil: Add AM62x PSIL and PDMA data")
Reviewed-by: Jai Luthra <j-luthra@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20231030190113.16782-1-rwahl@gmx.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0f40d5099cd6d828fd7de6227d3eabe86016724c ]
When the node for this phy selector is a child node of a syscon node then the
property 'reg' is used as an offset into the parent regmap. When the node
is standalone and gets its own regmap this offset is pre-applied. So we need
to track which method was used to get the regmap and not apply the offset
in the standalone case.
Fixes: 1fdfa7cccd35 ("phy: ti: gmii-sel: Allow parent to not be syscon node")
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20231025143302.1265633-1-afd@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 80aea01c48971a1fffc0252d036995572d84950d ]
When the host invalidates a guest page, it will also check if the page
was used to map the prefix of any guest CPUs, in which case they are
stopped and marked as needing a prefix refresh. Upon starting the
affected CPUs again, their prefix pages are explicitly faulted in and
revalidated if they had been invalidated. A bit in the PGSTEs indicates
whether or not a page might contain a prefix. The bit is allowed to
overindicate. Pages above 2G are skipped, because they cannot be
prefixes, since KVM runs all guests with MSO = 0.
The same applies for nested guests (VSIE). When the host invalidates a
guest page that maps the prefix of the nested guest, it has to stop the
affected nested guest CPUs and mark them as needing a prefix refresh.
The same PGSTE bit used for the guest prefix is also used for the
nested guest. Pages above 2G are skipped like for normal guests, which
is the source of the bug.
The nested guest runs is the guest primary address space. The guest
could be running the nested guest using MSO != 0. If the MSO + prefix
for the nested guest is above 2G, the check for nested prefix will skip
it. This will cause the invalidation notifier to not stop the CPUs of
the nested guest and not mark them as needing refresh. When the nested
guest is run again, its prefix will not be refreshed, since it has not
been marked for refresh. This will cause a fatal validity intercept
with VIR code 37.
Fix this by removing the check for 2G for nested guests. Now all
invalidations of pages with the notify bit set will always scan the
existing VSIE shadow state descriptors.
This allows to catch invalidations of nested guest prefix mappings even
when the prefix is above 2G in the guest virtual address space.
Fixes: a3508fbe9dc6 ("KVM: s390: vsie: initial support for nested virtualization")
Tested-by: Nico Boehr <nrb@linux.ibm.com>
Reviewed-by: Nico Boehr <nrb@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-ID: <20231102153549.53984-1-imbrenda@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c20d36cc2a2073d4cdcda92bd7a1bb9b3b3b7c79 ]
If misaligned_access_speed percpu var isn't so called "HWPROBE
MISALIGNED UNKNOWN", it means the probe has happened(this is possible
for example, hotplug off then hotplug on one cpu), and the percpu var
has been set, don't probe again in this case.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Fixes: 584ea6564bca ("RISC-V: Probe for unaligned access speed")
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230912154040.3306-1-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a80712b9cc7e57830260ec5e1feb9cdb59e1da2f ]
The commit:
cff9b2332ab7 ("kernel/sched: Modify initial boot task idle setup")
has changed the semantics of what is to be considered an idle task in
such a way that the idle task of an offline CPU may not carry the
PF_IDLE flag anymore.
However RCU-tasks-trace tests the opposite assertion, still assuming
that idle tasks carry the PF_IDLE flag during their whole lifecycle.
Remove this assumption to avoid spurious warnings but keep the initial
test verifying that the idle task is the current task on any offline
CPU.
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Fixes: cff9b2332ab7 ("kernel/sched: Modify initial boot task idle setup")
Suggested-by: Joel Fernandes <joel@joelfernandes.org>
Suggested-by: "Paul E. McKenney" <paulmck@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9715ed501b585d47444865071674c961c0cc0020 ]
The commit:
cff9b2332ab7 ("kernel/sched: Modify initial boot task idle setup")
has changed the semantics of what is to be considered an idle task in
such a way that CPU boot code preceding the actual idle loop is excluded
from it.
This has however introduced new potential RCU-tasks stalls when either:
1) Grace period is started before init/0 had a chance to set PF_IDLE,
keeping it stuck in the holdout list until idle ever schedules.
2) Grace period is started when some possible CPUs have never been
online, keeping their idle tasks stuck in the holdout list until the
CPU ever boots up.
3) Similar to 1) but with secondary CPUs: Grace period is started
concurrently with secondary CPU booting, putting its idle task in
the holdout list because PF_IDLE isn't yet observed on it. It stays
then stuck in the holdout list until that CPU ever schedules. The
effect is mitigated here by the hotplug AP thread that must run to
bring the CPU up.
Fix this with handling the new semantics of PF_IDLE, keeping in mind
that it may or may not be set on an idle task. Take advantage of that to
strengthen the coverage of an RCU-tasks quiescent state within an idle
task, excluding the CPU boot code from it. Only the code running within
the idle loop is now a quiescent state, along with offline CPUs.
Fixes: cff9b2332ab7 ("kernel/sched: Modify initial boot task idle setup")
Suggested-by: Joel Fernandes <joel@joelfernandes.org>
Suggested-by: "Paul E. McKenney" <paulmck@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2be4686d866ad5896f2bb94d82fe892197aea9c7 ]
Export the RCU point of view as to when a CPU is considered offline
(ie: when does RCU consider that a CPU is sufficiently down in the
hotplug process to not feature any possible read side).
This will be used by RCU-tasks whose vision of an offline CPU should
reasonably match the one of RCU core.
Fixes: cff9b2332ab7 ("kernel/sched: Modify initial boot task idle setup")
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 85d68222ddc5f4522e456d97d201166acb50f716 ]
Commit 851a723e45d1 ("sched: Always clear user_cpus_ptr in
do_set_cpus_allowed()") added a kfree() call to free any user
provided affinity mask, if present. It was changed later to use
kfree_rcu() in commit 9a5418bc48ba ("sched/core: Use kfree_rcu()
in do_set_cpus_allowed()") to avoid a circular locking dependency
problem.
It turns out that even kfree_rcu() isn't safe for avoiding
circular locking problem. As reported by kernel test robot,
the following circular locking dependency now exists:
&rdp->nocb_lock --> rcu_node_0 --> &rq->__lock
Solve this by breaking the rcu_node_0 --> &rq->__lock chain by moving
the resched_cpu() out from under rcu_node lock.
[peterz: heavily borrowed from Waiman's Changelog]
[paulmck: applied Z qiang feedback]
Fixes: 851a723e45d1 ("sched: Always clear user_cpus_ptr in do_set_cpus_allowed()")
Reported-by: kernel test robot <oliver.sang@intel.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/oe-lkp/202310302207.a25f1a30-oliver.sang@intel.com
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4b27d5c420335dad7aea1aa6e799fe1d05c63b7e ]
The acpi_thermal_unregister_thermal_zone() is paired with
acpi_thermal_register_thermal_zone() so it should mirror it. It should
clean up all the resources that the register function allocated and
leave the stuff that was allocated elsewhere.
Unfortunately, it doesn't call thermal_zone_device_disable(). Also it
calls kfree(tz->trip_table) when it shouldn't. That was allocated in
acpi_thermal_add(). Putting the kfree() here leads to a double free
in the acpi_thermal_add() clean up function.
Likewise, the acpi_thermal_remove() should mirror acpi_thermal_add() so
it should have an explicit kfree(tz->trip_table) as well.
Fixes: ec23c1c462de ("ACPI: thermal: Use trip point table to register thermal zones")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a53e215f90079f617360439b1b6284820731e34c ]
The cited patch tries to ensure no pending works on the mkey cache
workqueue by disabling adding new works and call flush_workqueue().
But this workqueue also has delayed works which might still be pending
the delay time to be queued.
Add cancel_delayed_work() for the delayed works which waits to be queued
and then the flush_workqueue() will flush all works which are already
queued and running.
Fixes: 374012b00457 ("RDMA/mlx5: Fix mkey cache possible deadlock on cleanup")
Link: https://lore.kernel.org/r/b8722f14e7ed81452f791764a26d2ed4cfa11478.1698256179.git.leon@kernel.org
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7e52b1164a474dc7b90f68fbb40e35ccd7f7e2e2 ]
Increase the size of temporary print buffer on stack to fix the
following warnings reported by LKP.
Since all the input parameters of snprintf() are under control
of this driver, it is not possible to trigger and overflow here,
but since the print buffer is on stack and discarded once driver
probe() finishes, it is not an issue to increase it by 10 bytes
and fix the warning in the process. Make it so.
"
drivers/clk/clk-si521xx.c: In function 'si521xx_probe':
>> drivers/clk/clk-si521xx.c:318:26: warning: '%d' directive output may be truncated writing between 1 and 10 bytes into a region of size 2 [-Wformat-truncation=]
snprintf(name, 6, "DIFF%d", i);
^~
drivers/clk/clk-si521xx.c:318:21: note: directive argument in the range [0, 2147483647]
snprintf(name, 6, "DIFF%d", i);
^~~~~~~~
drivers/clk/clk-si521xx.c:318:3: note: 'snprintf' output between 6 and 15 bytes into a destination of size 6
snprintf(name, 6, "DIFF%d", i);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
"
Fixes: edc12763a3a2 ("clk: si521xx: Clock driver for Skyworks Si521xx I2C PCIe clock generators")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310260412.AGASjFN4-lkp@intel.com/
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20231027085840.30098-1-marex@denx.de
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 293fbc28818135743f54d46c418ede3e4a20a742 ]
The mtty driver does not currently conform to the vfio SET_IRQS uAPI.
For example, it claims to support mask and unmask of INTx, but actually
does nothing. It claims to support AUTOMASK for INTx, but doesn't. It
fails to teardown eventfds under the full semantics specified by the
SET_IRQS ioctl. It also fails to teardown eventfds when the device is
closed, leading to memory leaks. It claims to support the request IRQ,
but doesn't.
Fix all these.
A side effect of this is that QEMU will now report a warning:
vfio <uuid>: Failed to set up UNMASK eventfd signaling for interrupt \
INTX-0: VFIO_DEVICE_SET_IRQS failure: Inappropriate ioctl for device
The fact is that the unmask eventfd was never supported but quietly
failed. mtty never honored the AUTOMASK behavior, therefore there
was nothing to unmask. QEMU is verbose about the failure, but
properly falls back to userspace unmasking.
Fixes: 9d1a546c53b4 ("docs: Sample driver to demonstrate how to use Mediated device framework.")
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/r/20231016224736.2575718-2-alex.williamson@redhat.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5acab6eb592387191c1bb745ba9b815e1e076db5 ]
During hisilicon accelerator live migration operation. In order to
prevent the problem of EQ/AEQ interrupt loss. Migration driver will
trigger an EQ/AEQ doorbell at the end of the migration.
This operation may cause double interruption of EQ/AEQ events.
To ensure that the EQ/AEQ interrupt processing function is normal.
The interrupt handling functionality of EQ/AEQ needs to be updated.
Used to handle repeated interrupts event.
Fixes: b0eed085903e ("hisi_acc_vfio_pci: Add support for VFIO live migration")
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 01aed663e6c421aeafc9c330bda630976b50a764 ]
There is no need to free the reset_data structure if the recovery is
unsuccessful and the reset is synchronous. The function
adf_dev_aer_schedule_reset() handles the cleanup properly. Only
asynchronous resets require such structure to be freed inside the reset
worker.
Fixes: d8cba25d2c68 ("crypto: qat - Intel(R) QAT driver framework")
Signed-off-by: Svyatoslav Pankratov <svyatoslav.pankratov@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bb40d32689d73c46de39a0529d551f523f21dc9b ]
Since commit adad556efcdd ("crypto: api - Fix built-in testing
dependency failures"), the following warning appears when booting an
x86_64 kernel that is configured with
CONFIG_CRYPTO_MANAGER_EXTRA_TESTS=y and CONFIG_CRYPTO_AES_NI_INTEL=y,
even when CONFIG_CRYPTO_XTS=y and CONFIG_CRYPTO_AES=y:
alg: skcipher: skipping comparison tests for xts-aes-aesni because xts(ecb(aes-generic)) is unavailable
This is caused by an issue in the xts template where it allocates an
"aes" single-block cipher without declaring a dependency on it via the
crypto_spawn mechanism. This issue was exposed by the above commit
because it reversed the order that the algorithms are tested in.
Specifically, when "xts(ecb(aes-generic))" is instantiated and tested
during the comparison tests for "xts-aes-aesni", the "xts" template
allocates an "aes" crypto_cipher for encrypting tweaks. This resolves
to "aes-aesni". (Getting "aes-aesni" instead of "aes-generic" here is a
bit weird, but it's apparently intended.) Due to the above-mentioned
commit, the testing of "aes-aesni", and the finalization of its
registration, now happens at this point instead of before. At the end
of that, crypto_remove_spawns() unregisters all algorithm instances that
depend on a lower-priority "aes" implementation such as "aes-generic"
but that do not depend on "aes-aesni". However, because "xts" does not
use the crypto_spawn mechanism for its "aes", its dependency on
"aes-aesni" is not recognized by crypto_remove_spawns(). Thus,
crypto_remove_spawns() unexpectedly unregisters "xts(ecb(aes-generic))".
Fix this issue by making the "xts" template use the crypto_spawn
mechanism for its "aes" dependency, like what other templates do.
Note, this fix could be applied as far back as commit f1c131b45410
("crypto: xts - Convert to skcipher"). However, the issue only got
exposed by the much more recent changes to how the crypto API runs the
self-tests, so there should be no need to backport this to very old
kernels. Also, an alternative fix would be to flip the list iteration
order in crypto_start_tests() to restore the original testing order.
I'm thinking we should do that too, since the original order seems more
natural, but it shouldn't be relied on for correctness.
Fixes: adad556efcdd ("crypto: api - Fix built-in testing dependency failures")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 23671f4dfd10b48b4a2fee4768886f0d8ec55b7e ]
libbpf accesses the ELF data requiring at least 8 byte alignment,
however, the data is generated into a C string that doesn't guarantee
alignment. Fix this by assigning to an aligned char array. Use sizeof
on the array, less one for the \0 terminator, rather than generating a
constant.
Fixes: a6cc6b34b93e ("bpftool: Provide a helper method for accessing skeleton's embedded ELF data")
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20231007044439.25171-1-irogers@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ebc8484d0e6da9e6c9e8cfa1f40bf94e9c6fc512 ]
This cast was made by purpose for older libbpf where the
bpf_object_skeleton field is void * instead of const void *
to eliminate a warning (as i understand
-Wincompatible-pointer-types-discards-qualifiers) but this
cast introduces another warning (-Wcast-qual) for libbpf
where data field is const void *
It makes sense for bpftool to be in sync with libbpf from
kernel sources
Signed-off-by: Denys Zagorui <dzagorui@cisco.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20230907090210.968612-1-dzagorui@cisco.com
Stable-dep-of: 23671f4dfd10 ("bpftool: Align output skeleton ELF code")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bbf80d713fe75cfbecda26e7c03a9a8d22af2f4f ]
While BPF allows to set icsk->->icsk_delack_max
and/or icsk->icsk_rto_min, we have an ip route
attribute (RTAX_RTO_MIN) to be able to tune rto_min,
but nothing to consequently adjust max delayed ack,
which vary from 40ms to 200 ms (TCP_DELACK_{MIN|MAX}).
This makes RTAX_RTO_MIN of almost no practical use,
unless customers are in big trouble.
Modern days datacenter communications want to set
rto_min to ~5 ms, and the max delayed ack one jiffie
smaller to avoid spurious retransmits.
After this patch, an "rto_min 5" route attribute will
effectively lower max delayed ack timers to 4 ms.
Note in the following ss output, "rto:6 ... ato:4"
$ ss -temoi dst XXXXXX
State Recv-Q Send-Q Local Address:Port Peer Address:Port Process
ESTAB 0 0 [2002:a05:6608:295::]:52950 [2002:a05:6608:297::]:41597
ino:255134 sk:1001 <->
skmem:(r0,rb1707063,t872,tb262144,f0,w0,o0,bl0,d0) ts sack
cubic wscale:8,8 rto:6 rtt:0.02/0.002 ato:4 mss:4096 pmtu:4500
rcvmss:536 advmss:4096 cwnd:10 bytes_sent:54823160 bytes_acked:54823121
bytes_received:54823120 segs_out:1370582 segs_in:1370580
data_segs_out:1370579 data_segs_in:1370578 send 16.4Gbps
pacing_rate 32.6Gbps delivery_rate 1.72Gbps delivered:1370579
busy:26920ms unacked:1 rcv_rtt:34.615 rcv_space:65920
rcv_ssthresh:65535 minrtt:0.015 snd_wnd:65536
While we could argue this patch fixes a bug with RTAX_RTO_MIN,
I do not add a Fixes: tag, so that we can soak it a bit before
asking backports to stable branches.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f69791c39745e64621216fe8919cb73c0065002b ]
Right now we never release the power-domains properly on the error path.
Add a routine to be reused for this purpose and appropriate jumps in
probe() to run that routine where necessary.
Fixes: 2f6f8af67203 ("media: camss: Refactor VFE power domain toggling")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b278080a89f452063915beda0ade6b3ed5ee4271 ]
Previously the jump label err_cleanup was used higher in the probe()
function to release the async notifier however the async notifier
registration was moved later in the code rendering the previous four jumps
redundant.
Rename the label from err_cleanup to err_v4l2_device_unregister to capture
what the jump does.
Fixes: 51397a4ec75d ("media: qcom: Initialise V4L2 async notifier later")
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil: fix old name in commit log: err_v4l2_device_register -> err_v4l2_device_unregister]
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d609f3d228a8efe991f44f11f24146e2a5209755 ]
Userspace applications indicate their multi-buffer capability to xsk
using XSK_USE_SG socket bind flag. For sockets using shared umem the
bind flag may contain XSK_USE_SG only for the first socket. For any
subsequent socket the only option supported is XDP_SHARED_UMEM.
Add option XDP_UMEM_SG_FLAG in umem config flags to store the
multi-buffer handling capability when indicated by XSK_USE_SG option in
bing flag by the first socket. Use this to derive multi-buffer capability
for subsequent sockets in xsk core.
Signed-off-by: Tirthendu Sarkar <tirthendu.sarkar@intel.com>
Fixes: 81470b5c3c66 ("xsk: introduce XSK_USE_SG bind flag for xsk socket")
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20230907035032.2627879-1-tirthendu.sarkar@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 376907f3a0b34a17e80417825f8cc1c40fcba81b ]
Patch series "Three memory-failure fixes".
I've been looking at the memory-failure code and I believe I have found
three bugs that need fixing -- one going all the way back to 2010! I'll
have more patches later to use folios more extensively but didn't want
these bugfixes to get caught up in that.
This patch (of 3):
Both collect_procs_anon() and collect_procs_file() iterate over the VMA
interval trees looking for a single pgoff, so it is wrong to look for the
pgoff of the head page as is currently done. However, it is also wrong to
look at page->mapping of the precise page as this is invalid for tail
pages. Clear up the confusion by passing both the folio and the precise
page to collect_procs().
Link: https://lkml.kernel.org/r/20231218135837.3310403-1-willy@infradead.org
Link: https://lkml.kernel.org/r/20231218135837.3310403-2-willy@infradead.org
Fixes: 415c64c1453a ("mm/memory-failure: split thp earlier in memory error handling")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 91e79d22be75fec88ae58d274a7c9e49d6215099 ]
The one caller of DAX lock/unlock page already calls compound_head(), so
use page_folio() instead, then use a folio throughout the DAX code to
remove uses of page->mapping and page->index.
[jane.chu@oracle.com: add comment to mf_generic_kill_procss(), simplify mf_generic_kill_procs:folio initialization]
Link: https://lkml.kernel.org/r/20230908222336.186313-1-jane.chu@oracle.com
Link: https://lkml.kernel.org/r/20230822231314.349200-1-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Jane Chu <jane.chu@oracle.com>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Jane Chu <jane.chu@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: 376907f3a0b3 ("mm/memory-failure: pass the folio and the page to collect_procs()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 382a32018b74f407008615e0e831d05ed28e81cd ]
Commit 9718475e6908 ("socket: Add SO_TIMESTAMPING_NEW") added the new
socket option SO_TIMESTAMPING_NEW. However, it was never implemented in
__sock_cmsg_send thus breaking SO_TIMESTAMPING cmsg for platforms using
SO_TIMESTAMPING_NEW.
Fixes: 9718475e6908 ("socket: Add SO_TIMESTAMPING_NEW")
Link: https://lore.kernel.org/netdev/6a7281bf-bc4a-4f75-bb88-7011908ae471@app.fastmail.com/
Signed-off-by: Thomas Lange <thomas@corelatus.se>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240104085744.49164-1-thomas@corelatus.se
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e009b2efb7a8850498796b360043ac25c8d3d28f ]
The 2 lines to check for the BNXT_HWRM_PF_UNLOAD_SP_EVENT bit was
mis-applied to bnxt_cfg_ntp_filters() and should have been applied to
bnxt_sp_task().
Fixes: 19241368443f ("bnxt_en: Send PF driver unload notification to all VFs.")
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9039cd4c61635b2d541009a7cd5e2cc052402f28 ]
CSR.OPS bits specify the current operating mode and (according to
documentation) they are updated by HW when the operating mode change
request is processed. To comply with this check CSR.OPS before proceeding.
Commit introduces ravb_set_opmode() that does all the necessities for
setting the operating mode (set CCC.OPC (and CCC.GAC, CCC.CSEL, if any) and
wait for CSR.OPS) and call it where needed. This should comply with all the
HW manuals requirements as different manual variants specify that different
modes need to be checked in CSR.OPS when setting CCC.OPC.
If gPTP active in config mode is supported and it needs to be enabled, the
CCC.GAC and CCC.CSEL needs to be configured along with CCC.OPC in the same
write access. For this, ravb_set_opmode() allows passing GAC and CSEL as
part of opmode and the function updates accordingly CCC register.
Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eaac6a2d26b65511e164772bec6918fcbc61938e ]
Add check for usbnet_get_endpoints() and return the error if it fails
in order to transfer the error.
Fixes: 16626b0cc3d5 ("asix: Add a new driver for the AX88172A")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 818ed8933bd17bc91a9fa8b94a898189c546fc1a ]
During QoS scheduling testing with multiple strict priority flows, the
netdev tx watchdog timeout routine is invoked when a low priority QoS
queue doesn't get a chance to transmit the packets because other high
priority flows are completely subscribing the transmit link. The netdev
tx watchdog timeout routine will stop MAC RX and TX functionality in
otx2_stop() routine before cleanup of HW TX queues which results in SMQ
flush errors because the packets belonging to low priority queues will
never gets flushed since MAC TX is disabled. This patch fixes the issue
by re-enabling MAC TX to ensure the packets in HW pipeline gets flushed
properly.
Fixes: a7faa68b4e7f ("octeontx2-af: Start/Stop traffic in CGX along with NPC")
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a0d9528f6daf7fe8de217fa80a94d2989d2a57a7 ]
Currently the NIX TX link credits are initialized based on the max frame
size that can be transmitted on a link but when the MTU is changed, the
NIX TX link credits are reprogrammed by the SW based on the new MTU value.
Since SMQ max packet length is programmed to max frame size by default,
there is a chance that NIX TX may stall while sending a max frame sized
packet on the link with insufficient credits to send the packet all at
once. This patch avoids stall issue by not changing the link credits
dynamically when the MTU is changed.
Fixes: 1c74b89171c3 ("octeontx2-af: Wait for TX link idle for credits change")
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: Nithin Kumar Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9dbe086c69b8902c85cece394760ac212e9e4ccc ]
A crash was found when dumping SMC-R connections. It can be reproduced
by following steps:
- environment: two RNICs on both sides.
- run SMC-R between two sides, now a SMC_LGR_SYMMETRIC type link group
will be created.
- set the first RNIC down on either side and link group will turn to
SMC_LGR_ASYMMETRIC_LOCAL then.
- run 'smcss -R' and the crash will be triggered.
BUG: kernel NULL pointer dereference, address: 0000000000000010
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 8000000101fdd067 P4D 8000000101fdd067 PUD 10ce46067 PMD 0
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 3 PID: 1810 Comm: smcss Kdump: loaded Tainted: G W E 6.7.0-rc6+ #51
RIP: 0010:__smc_diag_dump.constprop.0+0x36e/0x620 [smc_diag]
Call Trace:
<TASK>
? __die+0x24/0x70
? page_fault_oops+0x66/0x150
? exc_page_fault+0x69/0x140
? asm_exc_page_fault+0x26/0x30
? __smc_diag_dump.constprop.0+0x36e/0x620 [smc_diag]
smc_diag_dump_proto+0xd0/0xf0 [smc_diag]
smc_diag_dump+0x26/0x60 [smc_diag]
netlink_dump+0x19f/0x320
__netlink_dump_start+0x1dc/0x300
smc_diag_handler_dump+0x6a/0x80 [smc_diag]
? __pfx_smc_diag_dump+0x10/0x10 [smc_diag]
sock_diag_rcv_msg+0x121/0x140
? __pfx_sock_diag_rcv_msg+0x10/0x10
netlink_rcv_skb+0x5a/0x110
sock_diag_rcv+0x28/0x40
netlink_unicast+0x22a/0x330
netlink_sendmsg+0x240/0x4a0
__sock_sendmsg+0xb0/0xc0
____sys_sendmsg+0x24e/0x300
? copy_msghdr_from_user+0x62/0x80
___sys_sendmsg+0x7c/0xd0
? __do_fault+0x34/0x1a0
? do_read_fault+0x5f/0x100
? do_fault+0xb0/0x110
__sys_sendmsg+0x4d/0x80
do_syscall_64+0x45/0xf0
entry_SYSCALL_64_after_hwframe+0x6e/0x76
When the first RNIC is set down, the lgr->lnk[0] will be cleared and an
asymmetric link will be allocated in lgr->link[SMC_LINKS_PER_LGR_MAX - 1]
by smc_llc_alloc_alt_link(). Then when we try to dump SMC-R connections
in __smc_diag_dump(), the invalid lgr->lnk[0] will be accessed, resulting
in this issue. So fix it by accessing the right link.
Fixes: f16a7dd5cf27 ("smc: netlink interface for SMC sockets")
Reported-by: henaumars <henaumars@sina.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=7616
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Link: https://lore.kernel.org/r/1703662835-53416-1-git-send-email-guwen@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 89f45c30172c80e55c887f32f1af8e184124577b ]
When dma_alloc_coherent() fails, we should free qdev->lrg_buf
to prevent potential memleak.
Fixes: 1357bfcf7106 ("qla3xxx: Dynamically size the rx buffer queue based on the MTU.")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Link: https://lore.kernel.org/r/20231227070227.10527-1-dinghao.liu@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2311e06b9bf3d44e15f9175af177a782806f688f ]
For rq, we have three cases getting buffers from virtio core:
1. virtqueue_get_buf{,_ctx}
2. virtqueue_detach_unused_buf
3. callback for virtqueue_resize
But in commit 295525e29a5b("virtio_net: merge dma operations when
filling mergeable buffers"), I missed the dma unmap for the #3 case.
That will leak some memory, because I did not release the pages referred
by the unused buffers.
If we do such script, we will make the system OOM.
while true
do
ethtool -G ens4 rx 128
ethtool -G ens4 rx 256
free -m
done
Fixes: 295525e29a5b ("virtio_net: merge dma operations when filling mergeable buffers")
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/20231226094333.47740-1-xuanzhuo@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d12a26b74fb77434b73fe39022266c4b00907219 ]
Use DEV_STATS_INC() and DEV_STATS_READ() which provide
atomicity on paths that can be used concurrently.
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 2311e06b9bf3 ("virtio_net: fix missing dma unmap for resize")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8026e40608b4d552216d2a818ca7080a4264bb44 ]
Prevent move_mount from applying the attach_disconnected flag
to move_mount(). This prevents detached mounts from appearing
as / when applying mount mediation, which is not only incorrect
but could result in bad policy being generated.
Basic mount rules like
allow mount,
allow mount options=(move) -> /target/,
will allow detached mounts, allowing older policy to continue
to function. New policy gains the ability to specify `detached` as
a source option
allow mount detached -> /target/,
In addition make sure support of move_mount is advertised as
a feature to userspace so that applications that generate policy
can respond to the addition.
Note: this fixes mediation of move_mount when a detached mount is used,
it does not fix the broader regression of apparmor mediation of
mounts under the new mount api.
Link: https://lore.kernel.org/all/68c166b8-5b4d-4612-8042-1dee3334385b@leemhuis.info/T/#mb35fdde37f999f08f0b02d58dc1bf4e6b65b8da2
Fixes: 157a3537d6bc ("apparmor: Fix regression in mount mediation")
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 947dfc8138dfaeb6e966e2d661de89eb203e3064 ]
According to the Intel Software Manual for I225, Section 7.5.2.7,
hicredit should be multiplied by the constant link-rate value, 0x7736.
Currently, the old constant link-rate value, 0x7735, from the boards
supported on igb are being used, most likely due to a copy'n'paste, as
the rest of the logic is the same for both drivers.
Update hicredit accordingly.
Fixes: 1ab011b0bf07 ("igc: Add support for CBS offloading")
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Rodrigo Cataldo <rodrigo.cadore@l-acoustics.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 371e576ff3e8580d91d49026e5d5faebf5565558 ]
During a PCI FLR the MSI-X Enable flag in the VF PCI MSI-X capability
register will be cleared. This can lead to issues when a VF is
assigned to a VM because in these cases the VF driver receives no
indication of the PF PCI error/reset and additionally it is incapable
of restoring the cleared flag in the hypervisor configuration space
without fully reinitializing the driver interrupt functionality.
Since the VF driver is unable to easily resolve this condition on its own,
restore the VF MSI-X flag during the PF PCI reset handling.
Fixes: 19b7960b2da1 ("i40e: implement split PCI error reset handler")
Co-developed-by: Karen Ostrowska <karen.ostrowska@intel.com>
Signed-off-by: Karen Ostrowska <karen.ostrowska@intel.com>
Co-developed-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Andrii Staikov <andrii.staikov@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b036d8ef3120b996751495ce25994eea58032a98 ]
When a control changes value the return value from _put() should be 1 so
we get events generated to userspace notifying applications of the change.
While the I2S mux gets this right the S/PDIF mux does not, fix the return
value.
Fixes: c8609f3870f7 ("ASoC: meson: add g12a tohdmitx control")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240103-meson-enum-val-v1-4-424af7a8fb91@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 172c88244b5f2d3375403ebb504d407be0fded59 ]
When a control changes value the return value from _put() should be 1 so
we get events generated to userspace notifying applications of the change.
We are checking if there has been a change and exiting early if not but we
are not providing the correct return value in the latter case, fix this.
Fixes: af2618a2eee8 ("ASoC: meson: g12a: add internal DAC glue driver")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240103-meson-enum-val-v1-3-424af7a8fb91@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1e001206804be3f3d21f4a1cf16e5d059d75643f ]
When writing to an enum we need to verify that the value written is valid
for the enumeration, the helper function snd_soc_item_enum_to_val() doesn't
do it since it needs to return an unsigned (and in any case we'd need to
check the return value).
Fixes: c8609f3870f7 ("ASoC: meson: add g12a tohdmitx control")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240103-meson-enum-val-v1-2-424af7a8fb91@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3150b70e944ead909260285dfb5707d0bedcf87b ]
When writing to an enum we need to verify that the value written is valid
for the enumeration, the helper function snd_soc_item_enum_to_val() doesn't
do it since it needs to return an unsigned (and in any case we'd need to
check the return value).
Fixes: af2618a2eee8 ("ASoC: meson: g12a: add internal DAC glue driver")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240103-meson-enum-val-v1-1-424af7a8fb91@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6a15584e99db8918b60e507539c7446375dcf366 ]
Commit 3116f59c12bd ("i40e: fix use-after-free in
i40e_sync_filters_subtask()") avoided use-after-free issues,
by increasing refcount during update the VSI filter list to
the HW. However, it missed the unicast situation.
When deleting an unicast FDB entry, the i40e driver will release
the mac_filter, and i40e_service_task will concurrently request
firmware to add the mac_filter, which will lead to the following
use-after-free issue.
Fix again for both netdev->uc and netdev->mc.
BUG: KASAN: use-after-free in i40e_aqc_add_filters+0x55c/0x5b0 [i40e]
Read of size 2 at addr ffff888eb3452d60 by task kworker/8:7/6379
CPU: 8 PID: 6379 Comm: kworker/8:7 Kdump: loaded Tainted: G
Workqueue: i40e i40e_service_task [i40e]
Call Trace:
dump_stack+0x71/0xab
print_address_description+0x6b/0x290
kasan_report+0x14a/0x2b0
i40e_aqc_add_filters+0x55c/0x5b0 [i40e]
i40e_sync_vsi_filters+0x1676/0x39c0 [i40e]
i40e_service_task+0x1397/0x2bb0 [i40e]
process_one_work+0x56a/0x11f0
worker_thread+0x8f/0xf40
kthread+0x2a0/0x390
ret_from_fork+0x1f/0x40
Allocated by task 21948:
kasan_kmalloc+0xa6/0xd0
kmem_cache_alloc_trace+0xdb/0x1c0
i40e_add_filter+0x11e/0x520 [i40e]
i40e_addr_sync+0x37/0x60 [i40e]
__hw_addr_sync_dev+0x1f5/0x2f0
i40e_set_rx_mode+0x61/0x1e0 [i40e]
dev_uc_add_excl+0x137/0x190
i40e_ndo_fdb_add+0x161/0x260 [i40e]
rtnl_fdb_add+0x567/0x950
rtnetlink_rcv_msg+0x5db/0x880
netlink_rcv_skb+0x254/0x380
netlink_unicast+0x454/0x610
netlink_sendmsg+0x747/0xb00
sock_sendmsg+0xe2/0x120
__sys_sendto+0x1ae/0x290
__x64_sys_sendto+0xdd/0x1b0
do_syscall_64+0xa0/0x370
entry_SYSCALL_64_after_hwframe+0x65/0xca
Freed by task 21948:
__kasan_slab_free+0x137/0x190
kfree+0x8b/0x1b0
__i40e_del_filter+0x116/0x1e0 [i40e]
i40e_del_mac_filter+0x16c/0x300 [i40e]
i40e_addr_unsync+0x134/0x1b0 [i40e]
__hw_addr_sync_dev+0xff/0x2f0
i40e_set_rx_mode+0x61/0x1e0 [i40e]
dev_uc_del+0x77/0x90
rtnl_fdb_del+0x6a5/0x860
rtnetlink_rcv_msg+0x5db/0x880
netlink_rcv_skb+0x254/0x380
netlink_unicast+0x454/0x610
netlink_sendmsg+0x747/0xb00
sock_sendmsg+0xe2/0x120
__sys_sendto+0x1ae/0x290
__x64_sys_sendto+0xdd/0x1b0
do_syscall_64+0xa0/0x370
entry_SYSCALL_64_after_hwframe+0x65/0xca
Fixes: 3116f59c12bd ("i40e: fix use-after-free in i40e_sync_filters_subtask()")
Fixes: 41c445ff0f48 ("i40e: main driver core")
Signed-off-by: Ke Xiao <xiaoke@sangfor.com.cn>
Signed-off-by: Ding Hui <dinghui@sangfor.com.cn>
Cc: Di Zhu <zhudi2@huawei.com>
Reviewed-by: Jan Sokolowski <jan.sokolowski@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 01b2885d9415152bcb12ff1f7788f500a74ea0ed ]
Commit 86a7e0b69bd5 ("net: prevent rewrite of msg_name in
sock_sendmsg()") made sock_sendmsg save the incoming msg_name pointer
and restore it before returning, to insulate the caller against
msg_name being changed by the called code. If the address length
was also changed however, we may return with an inconsistent structure
where the length doesn't match the address, and attempts to reuse it may
lead to lost packets.
For example, a kernel that doesn't have commit 1c5950fc6fe9 ("udp6: fix
potential access to stale information") will replace a v4 mapped address
with its ipv4 equivalent, and shorten namelen accordingly from 28 to 16.
If the caller attempts to reuse the resulting msg structure, it will have
the original ipv6 (v4 mapped) address but an incorrect v4 length.
Fixes: 86a7e0b69bd5 ("net: prevent rewrite of msg_name in sock_sendmsg()")
Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
