b5964b968a
1160923 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Joanne Koong
|
b5964b968a |
bpf: Add skb dynptrs
Add skb dynptrs, which are dynptrs whose underlying pointer points to a skb. The dynptr acts on skb data. skb dynptrs have two main benefits. One is that they allow operations on sizes that are not statically known at compile-time (eg variable-sized accesses). Another is that parsing the packet data through dynptrs (instead of through direct access of skb->data and skb->data_end) can be more ergonomic and less brittle (eg does not need manual if checking for being within bounds of data_end). For bpf prog types that don't support writes on skb data, the dynptr is read-only (bpf_dynptr_write() will return an error) For reads and writes through the bpf_dynptr_read() and bpf_dynptr_write() interfaces, reading and writing from/to data in the head as well as from/to non-linear paged buffers is supported. Data slices through the bpf_dynptr_data API are not supported; instead bpf_dynptr_slice() and bpf_dynptr_slice_rdwr() (added in subsequent commit) should be used. For examples of how skb dynptrs can be used, please see the attached selftests. Signed-off-by: Joanne Koong <joannelkoong@gmail.com> Link: https://lore.kernel.org/r/20230301154953.641654-8-joannelkoong@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Joanne Koong
|
d96d937d7c |
bpf: Add __uninit kfunc annotation
This patch adds __uninit as a kfunc annotation. This will be useful for scenarios such as for example in dynptrs, indicating whether the dynptr should be checked by the verifier as an initialized or an uninitialized dynptr. Without this annotation, the alternative would be needing to hard-code in the verifier the specific kfunc to indicate that arg should be treated as an uninitialized arg. Signed-off-by: Joanne Koong <joannelkoong@gmail.com> Link: https://lore.kernel.org/r/20230301154953.641654-7-joannelkoong@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Joanne Koong
|
485ec51ef9 |
bpf: Refactor verifier dynptr into get_dynptr_arg_reg
This commit refactors the logic for determining which register in a function is the dynptr into "get_dynptr_arg_reg". This will be used in the future when the dynptr reg for BPF_FUNC_dynptr_write will need to be obtained in order to support writes for skb dynptrs. Signed-off-by: Joanne Koong <joannelkoong@gmail.com> Link: https://lore.kernel.org/r/20230301154953.641654-6-joannelkoong@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Joanne Koong
|
8357b366cb |
bpf: Define no-ops for externally called bpf dynptr functions
Some bpf dynptr functions will be called from places where if CONFIG_BPF_SYSCALL is not set, then the dynptr function is undefined. For example, when skb type dynptrs are added in the next commit, dynptr functions are called from net/core/filter.c This patch defines no-op implementations of these dynptr functions so that they do not break compilation by being an undefined reference. Signed-off-by: Joanne Koong <joannelkoong@gmail.com> Link: https://lore.kernel.org/r/20230301154953.641654-5-joannelkoong@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Joanne Koong
|
1d18feb2c9 |
bpf: Allow initializing dynptrs in kfuncs
This change allows kfuncs to take in an uninitialized dynptr as a parameter. Before this change, only helper functions could successfully use uninitialized dynptrs. This change moves the memory access check (including stack state growing and slot marking) into process_dynptr_func(), which both helpers and kfuncs call into. Signed-off-by: Joanne Koong <joannelkoong@gmail.com> Link: https://lore.kernel.org/r/20230301154953.641654-4-joannelkoong@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Joanne Koong
|
7e0dac2807 |
bpf: Refactor process_dynptr_func
This change cleans up process_dynptr_func's flow to be more intuitive and updates some comments with more context. Signed-off-by: Joanne Koong <joannelkoong@gmail.com> Link: https://lore.kernel.org/r/20230301154953.641654-3-joannelkoong@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Joanne Koong
|
2f46439346 |
bpf: Support "sk_buff" and "xdp_buff" as valid kfunc arg types
The bpf mirror of the in-kernel sk_buff and xdp_buff data structures are __sk_buff and xdp_md. Currently, when we pass in the program ctx to a kfunc where the program ctx is a skb or xdp buffer, we reject the program if the in-kernel definition is sk_buff/xdp_buff instead of __sk_buff/xdp_md. This change allows "sk_buff <--> __sk_buff" and "xdp_buff <--> xdp_md" to be recognized as valid matches. The user program may pass in their program ctx as a __sk_buff or xdp_md, and the in-kernel definition of the kfunc may define this arg as a sk_buff or xdp_buff. Signed-off-by: Joanne Koong <joannelkoong@gmail.com> Link: https://lore.kernel.org/r/20230301154953.641654-2-joannelkoong@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
Jose E. Marchesi
|
ae256f9547 |
bpf, docs: Document BPF insn encoding in term of stored bytes
[Changes from V4: - s/regs:16/regs:8 in figure.] [Changes from V3: - Back to src_reg and dst_reg, since they denote register numbers as opposed to the values stored in these registers.] [Changes from V2: - Use src and dst consistently in the document. - Use a more graphical depiction of the 128-bit instruction. - Remove `Where:' fragment. - Clarify that unused bits are reserved and shall be zeroed.] [Changes from V1: - Use rst literal blocks for figures. - Avoid using | in the basic instruction/pseudo instruction figure. - Rebased to today's bpf-next master branch.] This patch modifies instruction-set.rst so it documents the encoding of BPF instructions in terms of how the bytes are stored (be it in an ELF file or as bytes in a memory buffer to be loaded into the kernel or some other BPF consumer) as opposed to how the instruction looks like once loaded. This is hopefully easier to understand by implementors looking to generate and/or consume bytes conforming BPF instructions. The patch also clarifies that the unused bytes in a pseudo-instruction shall be cleared with zeros. Signed-off-by: Jose E. Marchesi <jose.marchesi@oracle.com> Acked-by: Yonghong Song <yhs@fb.com> Acked-by: David Vernet <void@manifault.com> Link: https://lore.kernel.org/r/87h6v6i0da.fsf_-_@oracle.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
David Vernet
|
30a2d8328d |
bpf: Fix bpf_cgroup_from_id() doxygen header
In commit |
||
Jiaxun Yang
|
7364d60c26 |
bpf, mips: Implement R4000 workarounds for JIT
For R4000 erratas around multiplication and division instructions, as our use of those instructions are always followed by mflo/mfhi instructions, the only issue we need care is "MIPS R4000PC/SC Errata, Processor Revision 2.2 and 3.0" Errata 28: "A double-word or a variable shift may give an incorrect result if executed while an integer multiplication is in progress." We just emit a mfhi $0 to ensure the operation is completed after every multiplication instruction according to workaround suggestion in the document. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Acked-by: Johan Almbladh <johan.almbladh@anyfinetworks.com> Link: https://lore.kernel.org/bpf/20230228113305.83751-3-jiaxun.yang@flygoat.com |
||
|
Jiaxun Yang
|
bbefef2f07 |
bpf, mips: Implement DADDI workarounds for JIT
For DADDI errata we just workaround by disable immediate operation for BPF_ADD / BPF_SUB to avoid generation of DADDIU. All other use cases in JIT won't cause overflow thus they are all safe. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Acked-by: Johan Almbladh <johan.almbladh@anyfinetworks.com> Link: https://lore.kernel.org/bpf/20230228113305.83751-2-jiaxun.yang@flygoat.com |
||
Yonghong Song
|
c8ee37bde4 |
libbpf: Fix bpf_xdp_query() in old kernels
Commit 04d58f1b26a4("libbpf: add API to get XDP/XSK supported features")
added feature_flags to struct bpf_xdp_query_opts. If a user uses
bpf_xdp_query_opts with feature_flags member, the bpf_xdp_query()
will check whether 'netdev' family exists or not in the kernel.
If it does not exist, the bpf_xdp_query() will return -ENOENT.
But 'netdev' family does not exist in old kernels as it is
introduced in the same patch set as Commit
|
||
Ilya Leoshkevich
|
0a504fa1a7 |
libbpf: Document bpf_{btf,link,map,prog}_get_info_by_fd()
Replace the short informal description with the proper doc comments. Suggested-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20230220234958.764997-1-iii@linux.ibm.com |
||
Puranjay Mohan
|
06943ae675 |
libbpf: Fix arm syscall regs spec in bpf_tracing.h
The syscall register definitions for ARM in bpf_tracing.h doesn't define
the fifth parameter for the syscalls. Because of this some KPROBES based
selftests fail to compile for ARM architecture.
Define the fifth parameter that is passed in the R5 register (uregs[4]).
Fixes:
|
||
Rong Tao
|
11e456cae9 |
selftests/bpf: Fix compilation errors: Assign a value to a constant
Commit bc292ab00f6c("mm: introduce vma->vm_flags wrapper functions")
turns the vm_flags into a const variable.
Added bpf_find_vma test in commit f108662b27c9("selftests/bpf: Add tests
for bpf_find_vma") to assign values to variables that declare const in
find_vma_fail1.c programs, which is an error to the compiler and does not
test BPF verifiers. It is better to replace 'const vm_flags_t vm_flags'
with 'unsigned long vm_start' for testing.
$ make -C tools/testing/selftests/bpf/ -j8
...
progs/find_vma_fail1.c:16:16: error: cannot assign to non-static data
member 'vm_flags' with const-qualified type 'const vm_flags_t' (aka
'const unsigned long')
vma->vm_flags |= 0x55;
~~~~~~~~~~~~~ ^
../tools/testing/selftests/bpf/tools/include/vmlinux.h:1898:20:
note: non-static data member 'vm_flags' declared const here
const vm_flags_t vm_flags;
~~~~~~~~~~~`~~~~~~^~~~~~~~
Signed-off-by: Rong Tao <rongtao@cestc.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/tencent_CB281722B3C1BD504C16CDE586CACC2BE706@qq.com
|
||
Luis Gerhorst
|
c679bbd611 |
tools: bpftool: Remove invalid \' json escape
RFC8259 ("The JavaScript Object Notation (JSON) Data Interchange
Format") only specifies \", \\, \/, \b, \f, \n, \r, and \r as valid
two-character escape sequences. This does not include \', which is not
required in JSON because it exclusively uses double quotes as string
separators.
Solidus (/) may be escaped, but does not have to. Only reverse
solidus (\), double quotes ("), and the control characters have to be
escaped. Therefore, with this fix, bpftool correctly supports all valid
two-character escape sequences (but still does not support characters
that require multi-character escape sequences).
Witout this fix, attempting to load a JSON file generated by bpftool
using Python 3.10.6's default json.load() may fail with the error
"Invalid \escape" if the file contains the invalid escaped single
quote (\').
Fixes:
|
||
Tiezhu Yang
|
84c22fa83f |
selftests/bpf: Use __NR_prlimit64 instead of __NR_getrlimit in user_ringbuf test
After commit
|
||
|
Tiezhu Yang
|
29c66ad1c3 |
libbpf: Use struct user_pt_regs to define __PT_REGS_CAST() for LoongArch
LoongArch provides struct user_pt_regs instead of struct pt_regs
to userspace, use struct user_pt_regs to define __PT_REGS_CAST()
to fix the following build error:
CLNG-BPF [test_maps] loop1.bpf.o
progs/loop1.c:22:9: error: incomplete definition of type 'struct pt_regs'
m = PT_REGS_RC(ctx);
^~~~~~~~~~~~~~~
tools/testing/selftests/bpf/tools/include/bpf/bpf_tracing.h:493:41: note: expanded from macro 'PT_REGS_RC'
#define PT_REGS_RC(x) (__PT_REGS_CAST(x)->__PT_RC_REG)
~~~~~~~~~~~~~~~~~^
tools/testing/selftests/bpf/tools/include/bpf/bpf_helper_defs.h:20:8: note: forward declaration of 'struct pt_regs'
struct pt_regs;
^
1 error generated.
make: *** [Makefile:572: tools/testing/selftests/bpf/loop1.bpf.o] Error 1
make: Leaving directory 'tools/testing/selftests/bpf'
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/1677235015-21717-2-git-send-email-yangtiezhu@loongson.cn
|
||
Martin KaFai Lau
|
68bfd65fb9 |
Merge branch 'move SYS() macro to test_progs.h and run mptcp in a dedicated netns'
Hangbin Liu says: ==================== As Martin suggested, let's move the SYS() macro to test_progs.h since a lot of programs are using it. After that, let's run mptcp in a dedicated netns to avoid user config influence. v3: fix fd redirect typo. Move SYS() macro into the test_progs.h v2: remove unneed close_cgroup_fd goto label. ==================== Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> |
||
Hangbin Liu
|
02d6a057c7 |
selftests/bpf: run mptcp in a dedicated netns
The current mptcp test is run in init netns. If the user or default system config disabled mptcp, the test will fail. Let's run the mptcp test in a dedicated netns to avoid none kernel default mptcp setting. Suggested-by: Martin KaFai Lau <martin.lau@linux.dev> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net> Link: https://lore.kernel.org/r/20230224061343.506571-3-liuhangbin@gmail.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> |
||
|
Hangbin Liu
|
b61987d37c |
selftests/bpf: move SYS() macro into the test_progs.h
A lot of tests defined SYS() macro to run system calls with goto label. Let's move this macro to test_progs.h and add configurable "goto_label" as the first arg. Suggested-by: Martin KaFai Lau <martin.lau@linux.dev> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Link: https://lore.kernel.org/r/20230224061343.506571-2-liuhangbin@gmail.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> |
||
Tejun Heo
|
d0093aaefa |
selftests/bpf: Add a test case for bpf_cgroup_from_id()
Add a test case for bpf_cgroup_from_id. Signed-off-by: Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/r/Y/bBlt+tPozcQgws@slm.duckdns.org Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Tejun Heo
|
332ea1f697 |
bpf: Add bpf_cgroup_from_id() kfunc
cgroup ID is an userspace-visible 64bit value uniquely identifying a given cgroup. As the IDs are used widely, it's useful to be able to look up the matching cgroups. Add bpf_cgroup_from_id(). v2: Separate out selftest into its own patch as suggested by Alexei. Signed-off-by: Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/r/Y/bBaG96t0/gQl9/@slm.duckdns.org Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
Dave Thaler
|
746ce76712 |
bpf, docs: Add explanation of endianness
Document the discussion from the email thread on the IETF bpf list, where it was explained that the raw format varies by endianness of the processor. Signed-off-by: Dave Thaler <dthaler@microsoft.com> Acked-by: David Vernet <void@manifault.com> Link: https://lore.kernel.org/r/20230220223742.1347-1-dthaler1968@googlemail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
Stanislav Fomichev
|
9fa0289285 |
selftests/bpf: Fix BPF_FLOW_DISSECTOR_F_STOP_AT_FLOW_LABEL for empty flow label
Kernel's flow dissector continues to parse the packet when the (optional) IPv6 flow label is empty even when instructed to stop (via BPF_FLOW_DISSECTOR_F_STOP_AT_FLOW_LABEL). Do the same in our reference BPF reimplementation. Signed-off-by: Stanislav Fomichev <sdf@google.com> Acked-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/20230221180518.2139026-1-sdf@google.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
Pu Lehui
|
d40c3847b4 |
riscv, bpf: Add kfunc support for RV64
This patch adds kernel function call support for RV64. Since the offset from RV64 kernel and module functions to bpf programs is almost within the range of s32, the current infrastructure of RV64 is already sufficient for kfunc, so let's turn it on. Suggested-by: Björn Töpel <bjorn@rivosinc.com> Signed-off-by: Pu Lehui <pulehui@huawei.com> Acked-by: Björn Töpel <bjorn@rivosinc.com> Link: https://lore.kernel.org/r/20230221140656.3480496-1-pulehui@huaweicloud.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Ilya Leoshkevich
|
df2ccc180a |
bpf: Check for helper calls in check_subprogs()
The condition src_reg != BPF_PSEUDO_CALL && imm == BPF_FUNC_tail_call may be satisfied by a kfunc call. This would lead to unnecessarily setting has_tail_call. Use src_reg == 0 instead. Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Acked-by: Stanislav Fomichev <sdf@google.com> Link: https://lore.kernel.org/r/20230220163756.753713-1-iii@linux.ibm.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
Hengqi Chen
|
bb035ef0cc |
LoongArch: BPF: Support mixing bpf2bpf and tailcalls
The current implementation already allow such mixing. Let's enable it in JIT. Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com> Link: https://lore.kernel.org/r/20230218105317.4139666-1-hengqi.chen@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
Florent Revest
|
b539a287ba |
selftests/bpf: Fix cross compilation with CLANG_CROSS_FLAGS
I cross-compile my BPF selftests with the following command: CLANG_CROSS_FLAGS="--target=aarch64-linux-gnu --sysroot=/sysroot/" \ make LLVM=1 CC=clang CROSS_COMPILE=aarch64-linux-gnu- SRCARCH=arm64 (Note the use of CLANG_CROSS_FLAGS to specify a custom sysroot instead of letting clang use gcc's default sysroot) However, CLANG_CROSS_FLAGS gets propagated to host tools builds (libbpf and bpftool) and because they reference it directly in their Makefiles, they end up cross-compiling host objects which results in linking errors. This patch ensures that CLANG_CROSS_FLAGS is reset if CROSS_COMPILE isn't set (for example when reaching a BPF host tool build). Signed-off-by: Florent Revest <revest@chromium.org> Link: https://lore.kernel.org/r/20230217151832.27784-1-revest@chromium.org Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Tiezhu Yang
|
1f265d2aea |
selftests/bpf: Remove not used headers
The following three uapi headers:
tools/arch/arm64/include/uapi/asm/bpf_perf_event.h
tools/arch/s390/include/uapi/asm/bpf_perf_event.h
tools/arch/s390/include/uapi/asm/ptrace.h
were introduced in commit
|
||
Hou Tao
|
5d5de3a431 |
bpf: Only allocate one bpf_mem_cache for bpf_cpumask_ma
The size of bpf_cpumask is fixed, so there is no need to allocate many bpf_mem_caches for bpf_cpumask_ma, just one bpf_mem_cache is enough. Also add comments for bpf_mem_alloc_init() in bpf_mem_alloc.h to prevent future miuse. Signed-off-by: Hou Tao <houtao1@huawei.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/r/20230216024821.2202916-1-houtao@huaweicloud.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
Kumar Kartikeya Dwivedi
|
dbd8d22863 |
bpf: Wrap register invalidation with a helper
Typically, verifier should use env->allow_ptr_leaks when invaliding
registers for users that don't have CAP_PERFMON or CAP_SYS_ADMIN to
avoid leaking the pointer value. This is similar in spirit to
|
||
|
Kumar Kartikeya Dwivedi
|
da03e43a8c |
bpf: Fix check_reg_type for PTR_TO_BTF_ID
The current code does type matching for the case where reg->type is PTR_TO_BTF_ID or has the PTR_TRUSTED flag. However, this only needs to occur for non-MEM_ALLOC and non-MEM_PERCPU cases, but will include both as per the current code. The MEM_ALLOC case with or without PTR_TRUSTED needs to be handled specially by the code for type_is_alloc case, while MEM_PERCPU case must be ignored. Hence, to restore correct behavior and for clarity, explicitly list out the handled PTR_TO_BTF_ID types which should be handled for each case using a switch statement. Helpers currently only take: PTR_TO_BTF_ID PTR_TO_BTF_ID | PTR_TRUSTED PTR_TO_BTF_ID | MEM_RCU PTR_TO_BTF_ID | MEM_ALLOC PTR_TO_BTF_ID | MEM_PERCPU PTR_TO_BTF_ID | MEM_PERCPU | PTR_TRUSTED This fix was also described (for the MEM_ALLOC case) in [0]. [0]: https://lore.kernel.org/bpf/20221121160657.h6z7xuvedybp5y7s@apollo Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Link: https://lore.kernel.org/r/20230221200646.2500777-6-memxor@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Kumar Kartikeya Dwivedi
|
521d3c0a17 |
bpf: Remove unused MEM_ALLOC | PTR_TRUSTED checks
The plan is to supposedly tag everything with PTR_TRUSTED eventually, however those changes should bring in their respective code, instead of leaving it around right now. It is arguable whether PTR_TRUSTED is required for all types, when it's only use case is making PTR_TO_BTF_ID a bit stronger, while all other types are trusted by default. Hence, just drop the two instances which do not occur in the verifier for now to avoid reader confusion. Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Link: https://lore.kernel.org/r/20230221200646.2500777-5-memxor@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Kumar Kartikeya Dwivedi
|
0a09a2f933 |
bpf: Annotate data races in bpf_local_storage
There are a few cases where hlist_node is checked to be unhashed without holding the lock protecting its modification. In this case, one must use hlist_unhashed_lockless to avoid load tearing and KCSAN reports. Fix this by using lockless variant in places not protected by the lock. Since this is not prompted by any actual KCSAN reports but only from code review, I have not included a fixes tag. Cc: Martin KaFai Lau <martin.lau@kernel.org> Cc: KP Singh <kpsingh@kernel.org> Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Link: https://lore.kernel.org/r/20230221200646.2500777-4-memxor@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
Alexei Starovoitov
|
bf9bec4cb3 |
Merge branch 'bpf: Allow reads from uninit stack'
Eduard Zingerman says:
====================
This patch-set modifies BPF verifier to accept programs that read from
uninitialized stack locations, but only if executed in privileged mode.
This provides significant verification performance gains: 30% to 70% less
processed states for big number of test programs.
The reason for performance gains comes from treating STACK_MISC and
STACK_INVALID as compatible, when cached state is compared to current state
in verifier.c:stacksafe().
The change should not affect safety, because any value read from STACK_MISC
location has full binary range (e.g. 0x00-0xff for byte-sized reads).
Details and measurements are provided in the description for the patch #1.
The change was suggested by Andrii Nakryiko, the initial patch was created
by Alexei Starovoitov. The discussion could be found at [1].
Changes v1 -> v2 (v1 available at [2]):
- Calls to helper functions now convert STACK_INVALID to STACK_MISC
(suggested by Andrii);
- The test case progs/test_global_func10.c is updated to expect new
error message. Before recent commit [3] exact content of error
messages was not verified for this test.
- Replaced incorrect '//'-style comments in test case asm blocks by
'/*...*/'-style comments in order to fix compilation issues;
- Changed the tag from "Suggested-By" to "Co-developed-by" for Alexei
on patch #1, please let me know if this is appropriate use of the tag.
[1] https://lore.kernel.org/bpf/CAADnVQKs2i1iuZ5SUGuJtxWVfGYR9kDgYKhq3rNV+kBLQCu7rA@mail.gmail.com/
[2] https://lore.kernel.org/bpf/20230216183606.2483834-1-eddyz87@gmail.com/
[3]
|
||
Eduard Zingerman
|
6338a94d5a |
selftests/bpf: Tests for uninitialized stack reads
Three testcases to make sure that stack reads from uninitialized locations are accepted by verifier when executed in privileged mode: - read from a fixed offset; - read from a variable offset; - passing a pointer to stack to a helper converts STACK_INVALID to STACK_MISC. Signed-off-by: Eduard Zingerman <eddyz87@gmail.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20230219200427.606541-3-eddyz87@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Eduard Zingerman
|
6715df8d5d |
bpf: Allow reads from uninit stack
This commits updates the following functions to allow reads from
uninitialized stack locations when env->allow_uninit_stack option is
enabled:
- check_stack_read_fixed_off()
- check_stack_range_initialized(), called from:
- check_stack_read_var_off()
- check_helper_mem_access()
Such change allows to relax logic in stacksafe() to treat STACK_MISC
and STACK_INVALID in a same way and make the following stack slot
configurations equivalent:
| Cached state | Current state |
| stack slot | stack slot |
|------------------+------------------|
| STACK_INVALID or | STACK_INVALID or |
| STACK_MISC | STACK_SPILL or |
| | STACK_MISC or |
| | STACK_ZERO or |
| | STACK_DYNPTR |
This leads to significant verification speed gains (see below).
The idea was suggested by Andrii Nakryiko [1] and initial patch was
created by Alexei Starovoitov [2].
Currently the env->allow_uninit_stack is allowed for programs loaded
by users with CAP_PERFMON or CAP_SYS_ADMIN capabilities.
A number of test cases from verifier/*.c were expecting uninitialized
stack access to be an error. These test cases were updated to execute
in unprivileged mode (thus preserving the tests).
The test progs/test_global_func10.c expected "invalid indirect read
from stack" error message because of the access to uninitialized
memory region. This error is no longer possible in privileged mode.
The test is updated to provoke an error "invalid indirect access to
stack" because of access to invalid stack address (such error is not
verified by progs/test_global_func*.c series of tests).
The following tests had to be removed because these can't be made
unprivileged:
- verifier/sock.c:
- "sk_storage_get(map, skb->sk, &stack_value, 1): partially init
stack_value"
BPF_PROG_TYPE_SCHED_CLS programs are not executed in unprivileged mode.
- verifier/var_off.c:
- "indirect variable-offset stack access, max_off+size > max_initialized"
- "indirect variable-offset stack access, uninitialized"
These tests verify that access to uninitialized stack values is
detected when stack offset is not a constant. However, variable
stack access is prohibited in unprivileged mode, thus these tests
are no longer valid.
* * *
Here is veristat log comparing this patch with current master on a
set of selftest binaries listed in tools/testing/selftests/bpf/veristat.cfg
and cilium BPF binaries (see [3]):
$ ./veristat -e file,prog,states -C -f 'states_pct<-30' master.log current.log
File Program States (A) States (B) States (DIFF)
-------------------------- -------------------------- ---------- ---------- ----------------
bpf_host.o tail_handle_ipv6_from_host 349 244 -105 (-30.09%)
bpf_host.o tail_handle_nat_fwd_ipv4 1320 895 -425 (-32.20%)
bpf_lxc.o tail_handle_nat_fwd_ipv4 1320 895 -425 (-32.20%)
bpf_sock.o cil_sock4_connect 70 48 -22 (-31.43%)
bpf_sock.o cil_sock4_sendmsg 68 46 -22 (-32.35%)
bpf_xdp.o tail_handle_nat_fwd_ipv4 1554 803 -751 (-48.33%)
bpf_xdp.o tail_lb_ipv4 6457 2473 -3984 (-61.70%)
bpf_xdp.o tail_lb_ipv6 7249 3908 -3341 (-46.09%)
pyperf600_bpf_loop.bpf.o on_event 287 145 -142 (-49.48%)
strobemeta.bpf.o on_event 15915 4772 -11143 (-70.02%)
strobemeta_nounroll2.bpf.o on_event 17087 3820 -13267 (-77.64%)
xdp_synproxy_kern.bpf.o syncookie_tc 21271 6635 -14636 (-68.81%)
xdp_synproxy_kern.bpf.o syncookie_xdp 23122 6024 -17098 (-73.95%)
-------------------------- -------------------------- ---------- ---------- ----------------
Note: I limited selection by states_pct<-30%.
Inspection of differences in pyperf600_bpf_loop behavior shows that
the following patch for the test removes almost all differences:
- a/tools/testing/selftests/bpf/progs/pyperf.h
+ b/tools/testing/selftests/bpf/progs/pyperf.h
@ -266,8 +266,8 @ int __on_event(struct bpf_raw_tracepoint_args *ctx)
}
if (event->pthread_match || !pidData->use_tls) {
- void* frame_ptr;
- FrameData frame;
+ void* frame_ptr = 0;
+ FrameData frame = {};
Symbol sym = {};
int cur_cpu = bpf_get_smp_processor_id();
W/o this patch the difference comes from the following pattern
(for different variables):
static bool get_frame_data(... FrameData *frame ...)
{
...
bpf_probe_read_user(&frame->f_code, ...);
if (!frame->f_code)
return false;
...
bpf_probe_read_user(&frame->co_name, ...);
if (frame->co_name)
...;
}
int __on_event(struct bpf_raw_tracepoint_args *ctx)
{
FrameData frame;
...
get_frame_data(... &frame ...) // indirectly via a bpf_loop & callback
...
}
SEC("raw_tracepoint/kfree_skb")
int on_event(struct bpf_raw_tracepoint_args* ctx)
{
...
ret |= __on_event(ctx);
ret |= __on_event(ctx);
...
}
With regards to value `frame->co_name` the following is important:
- Because of the conditional `if (!frame->f_code)` each call to
__on_event() produces two states, one with `frame->co_name` marked
as STACK_MISC, another with it as is (and marked STACK_INVALID on a
first call).
- The call to bpf_probe_read_user() does not mark stack slots
corresponding to `&frame->co_name` as REG_LIVE_WRITTEN but it marks
these slots as BPF_MISC, this happens because of the following loop
in the check_helper_call():
for (i = 0; i < meta.access_size; i++) {
err = check_mem_access(env, insn_idx, meta.regno, i, BPF_B,
BPF_WRITE, -1, false);
if (err)
return err;
}
Note the size of the write, it is a one byte write for each byte
touched by a helper. The BPF_B write does not lead to write marks
for the target stack slot.
- Which means that w/o this patch when second __on_event() call is
verified `if (frame->co_name)` will propagate read marks first to a
stack slot with STACK_MISC marks and second to a stack slot with
STACK_INVALID marks and these states would be considered different.
[1] https://lore.kernel.org/bpf/CAEf4BzY3e+ZuC6HUa8dCiUovQRg2SzEk7M-dSkqNZyn=xEmnPA@mail.gmail.com/
[2] https://lore.kernel.org/bpf/CAADnVQKs2i1iuZ5SUGuJtxWVfGYR9kDgYKhq3rNV+kBLQCu7rA@mail.gmail.com/
[3] git@github.com:anakryiko/cilium.git
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Co-developed-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230219200427.606541-2-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
||
Linus Torvalds
|
5b7c4cabbb |
Networking changes for 6.3.
Core
----
- Add dedicated kmem_cache for typical/small skb->head, avoid having
to access struct page at kfree time, and improve memory use.
- Introduce sysctl to set default RPS configuration for new netdevs.
- Define Netlink protocol specification format which can be used
to describe messages used by each family and auto-generate parsers.
Add tools for generating kernel data structures and uAPI headers.
- Expose all net/core sysctls inside netns.
- Remove 4s sleep in netpoll if carrier is instantly detected on boot.
- Add configurable limit of MDB entries per port, and port-vlan.
- Continue populating drop reasons throughout the stack.
- Retire a handful of legacy Qdiscs and classifiers.
Protocols
---------
- Support IPv4 big TCP (TSO frames larger than 64kB).
- Add IP_LOCAL_PORT_RANGE socket option, to control local port range
on socket by socket basis.
- Track and report in procfs number of MPTCP sockets used.
- Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP
path manager.
- IPv6: don't check net.ipv6.route.max_size and rely on garbage
collection to free memory (similarly to IPv4).
- Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).
- ICMP: add per-rate limit counters.
- Add support for user scanning requests in ieee802154.
- Remove static WEP support.
- Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
reporting.
- WiFi 7 EHT channel puncturing support (client & AP).
BPF
---
- Add a rbtree data structure following the "next-gen data structure"
precedent set by recently added linked list, that is, by using
kfunc + kptr instead of adding a new BPF map type.
- Expose XDP hints via kfuncs with initial support for RX hash and
timestamp metadata.
- Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key
to better support decap on GRE tunnel devices not operating
in collect metadata.
- Improve x86 JIT's codegen for PROBE_MEM runtime error checks.
- Remove the need for trace_printk_lock for bpf_trace_printk
and bpf_trace_vprintk helpers.
- Extend libbpf's bpf_tracing.h support for tracing arguments of
kprobes/uprobes and syscall as a special case.
- Significantly reduce the search time for module symbols
by livepatch and BPF.
- Enable cpumasks to be used as kptrs, which is useful for tracing
programs tracking which tasks end up running on which CPUs in
different time intervals.
- Add support for BPF trampoline on s390x and riscv64.
- Add capability to export the XDP features supported by the NIC.
- Add __bpf_kfunc tag for marking kernel functions as kfuncs.
- Add cgroup.memory=nobpf kernel parameter option to disable BPF
memory accounting for container environments.
Netfilter
---------
- Remove the CLUSTERIP target. It has been marked as obsolete
for years, and we still have WARN splats wrt. races of
the out-of-band /proc interface installed by this target.
- Add 'destroy' commands to nf_tables. They are identical to
the existing 'delete' commands, but do not return an error if
the referenced object (set, chain, rule...) did not exist.
Driver API
----------
- Improve cpumask_local_spread() locality to help NICs set the right
IRQ affinity on AMD platforms.
- Separate C22 and C45 MDIO bus transactions more clearly.
- Introduce new DCB table to control DSCP rewrite on egress.
- Support configuration of Physical Layer Collision Avoidance (PLCA)
Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
shared medium Ethernet.
- Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
preemption of low priority frames by high priority frames.
- Add support for controlling MACSec offload using netlink SET.
- Rework devlink instance refcounts to allow registration and
de-registration under the instance lock. Split the code into multiple
files, drop some of the unnecessarily granular locks and factor out
common parts of netlink operation handling.
- Add TX frame aggregation parameters (for USB drivers).
- Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
messages with notifications for debug.
- Allow offloading of UDP NEW connections via act_ct.
- Add support for per action HW stats in TC.
- Support hardware miss to TC action (continue processing in SW from
a specific point in the action chain).
- Warn if old Wireless Extension user space interface is used with
modern cfg80211/mac80211 drivers. Do not support Wireless Extensions
for Wi-Fi 7 devices at all. Everyone should switch to using nl80211
interface instead.
- Improve the CAN bit timing configuration. Use extack to return error
messages directly to user space, update the SJW handling, including
the definition of a new default value that will benefit CAN-FD
controllers, by increasing their oscillator tolerance.
New hardware / drivers
----------------------
- Ethernet:
- nVidia BlueField-3 support (control traffic driver)
- Ethernet support for imx93 SoCs
- Motorcomm yt8531 gigabit Ethernet PHY
- onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
- Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
- Amlogic gxl MDIO mux
- WiFi:
- RealTek RTL8188EU (rtl8xxxu)
- Qualcomm Wi-Fi 7 devices (ath12k)
- CAN:
- Renesas R-Car V4H
Drivers
-------
- Bluetooth:
- Set Per Platform Antenna Gain (PPAG) for Intel controllers.
- Ethernet NICs:
- Intel (1G, igc):
- support TSN / Qbv / packet scheduling features of i226 model
- Intel (100G, ice):
- use GNSS subsystem instead of TTY
- multi-buffer XDP support
- extend support for GPIO pins to E823 devices
- nVidia/Mellanox:
- update the shared buffer configuration on PFC commands
- implement PTP adjphase function for HW offset control
- TC support for Geneve and GRE with VF tunnel offload
- more efficient crypto key management method
- multi-port eswitch support
- Netronome/Corigine:
- add DCB IEEE support
- support IPsec offloading for NFP3800
- Freescale/NXP (enetc):
- enetc: support XDP_REDIRECT for XDP non-linear buffers
- enetc: improve reconfig, avoid link flap and waiting for idle
- enetc: support MAC Merge layer
- Other NICs:
- sfc/ef100: add basic devlink support for ef100
- ionic: rx_push mode operation (writing descriptors via MMIO)
- bnxt: use the auxiliary bus abstraction for RDMA
- r8169: disable ASPM and reset bus in case of tx timeout
- cpsw: support QSGMII mode for J721e CPSW9G
- cpts: support pulse-per-second output
- ngbe: add an mdio bus driver
- usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
- r8152: handle devices with FW with NCM support
- amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
- virtio-net: support multi buffer XDP
- virtio/vsock: replace virtio_vsock_pkt with sk_buff
- tsnep: XDP support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add support for latency TLV (in FW control messages)
- Microchip (sparx5):
- separate explicit and implicit traffic forwarding rules, make
the implicit rules always active
- add support for egress DSCP rewrite
- IS0 VCAP support (Ingress Classification)
- IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.)
- ES2 VCAP support (Egress Access Control)
- support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- add MAB (port auth) offload support
- enable PTP receive for mv88e6390
- NXP (ocelot):
- support MAC Merge layer
- support for the the vsc7512 internal copper phys
- Microchip:
- lan9303: convert to PHYLINK
- lan966x: support TC flower filter statistics
- lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
- lan937x: support Credit Based Shaper configuration
- ksz9477: support Energy Efficient Ethernet
- other:
- qca8k: convert to regmap read/write API, use bulk operations
- rswitch: Improve TX timestamp accuracy
- Intel WiFi (iwlwifi):
- EHT (Wi-Fi 7) rate reporting
- STEP equalizer support: transfer some STEP (connection to radio
on platforms with integrated wifi) related parameters from the
BIOS to the firmware.
- Qualcomm 802.11ax WiFi (ath11k):
- IPQ5018 support
- Fine Timing Measurement (FTM) responder role support
- channel 177 support
- MediaTek WiFi (mt76):
- per-PHY LED support
- mt7996: EHT (Wi-Fi 7) support
- Wireless Ethernet Dispatch (WED) reset support
- switch to using page pool allocator
- RealTek WiFi (rtw89):
- support new version of Bluetooth co-existance
- Mobile:
- rmnet: support TX aggregation.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=xXhC
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- Add dedicated kmem_cache for typical/small skb->head, avoid having
to access struct page at kfree time, and improve memory use.
- Introduce sysctl to set default RPS configuration for new netdevs.
- Define Netlink protocol specification format which can be used to
describe messages used by each family and auto-generate parsers.
Add tools for generating kernel data structures and uAPI headers.
- Expose all net/core sysctls inside netns.
- Remove 4s sleep in netpoll if carrier is instantly detected on
boot.
- Add configurable limit of MDB entries per port, and port-vlan.
- Continue populating drop reasons throughout the stack.
- Retire a handful of legacy Qdiscs and classifiers.
Protocols:
- Support IPv4 big TCP (TSO frames larger than 64kB).
- Add IP_LOCAL_PORT_RANGE socket option, to control local port range
on socket by socket basis.
- Track and report in procfs number of MPTCP sockets used.
- Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
manager.
- IPv6: don't check net.ipv6.route.max_size and rely on garbage
collection to free memory (similarly to IPv4).
- Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).
- ICMP: add per-rate limit counters.
- Add support for user scanning requests in ieee802154.
- Remove static WEP support.
- Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
reporting.
- WiFi 7 EHT channel puncturing support (client & AP).
BPF:
- Add a rbtree data structure following the "next-gen data structure"
precedent set by recently added linked list, that is, by using
kfunc + kptr instead of adding a new BPF map type.
- Expose XDP hints via kfuncs with initial support for RX hash and
timestamp metadata.
- Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
better support decap on GRE tunnel devices not operating in collect
metadata.
- Improve x86 JIT's codegen for PROBE_MEM runtime error checks.
- Remove the need for trace_printk_lock for bpf_trace_printk and
bpf_trace_vprintk helpers.
- Extend libbpf's bpf_tracing.h support for tracing arguments of
kprobes/uprobes and syscall as a special case.
- Significantly reduce the search time for module symbols by
livepatch and BPF.
- Enable cpumasks to be used as kptrs, which is useful for tracing
programs tracking which tasks end up running on which CPUs in
different time intervals.
- Add support for BPF trampoline on s390x and riscv64.
- Add capability to export the XDP features supported by the NIC.
- Add __bpf_kfunc tag for marking kernel functions as kfuncs.
- Add cgroup.memory=nobpf kernel parameter option to disable BPF
memory accounting for container environments.
Netfilter:
- Remove the CLUSTERIP target. It has been marked as obsolete for
years, and we still have WARN splats wrt races of the out-of-band
/proc interface installed by this target.
- Add 'destroy' commands to nf_tables. They are identical to the
existing 'delete' commands, but do not return an error if the
referenced object (set, chain, rule...) did not exist.
Driver API:
- Improve cpumask_local_spread() locality to help NICs set the right
IRQ affinity on AMD platforms.
- Separate C22 and C45 MDIO bus transactions more clearly.
- Introduce new DCB table to control DSCP rewrite on egress.
- Support configuration of Physical Layer Collision Avoidance (PLCA)
Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
shared medium Ethernet.
- Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
preemption of low priority frames by high priority frames.
- Add support for controlling MACSec offload using netlink SET.
- Rework devlink instance refcounts to allow registration and
de-registration under the instance lock. Split the code into
multiple files, drop some of the unnecessarily granular locks and
factor out common parts of netlink operation handling.
- Add TX frame aggregation parameters (for USB drivers).
- Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
messages with notifications for debug.
- Allow offloading of UDP NEW connections via act_ct.
- Add support for per action HW stats in TC.
- Support hardware miss to TC action (continue processing in SW from
a specific point in the action chain).
- Warn if old Wireless Extension user space interface is used with
modern cfg80211/mac80211 drivers. Do not support Wireless
Extensions for Wi-Fi 7 devices at all. Everyone should switch to
using nl80211 interface instead.
- Improve the CAN bit timing configuration. Use extack to return
error messages directly to user space, update the SJW handling,
including the definition of a new default value that will benefit
CAN-FD controllers, by increasing their oscillator tolerance.
New hardware / drivers:
- Ethernet:
- nVidia BlueField-3 support (control traffic driver)
- Ethernet support for imx93 SoCs
- Motorcomm yt8531 gigabit Ethernet PHY
- onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
- Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
- Amlogic gxl MDIO mux
- WiFi:
- RealTek RTL8188EU (rtl8xxxu)
- Qualcomm Wi-Fi 7 devices (ath12k)
- CAN:
- Renesas R-Car V4H
Drivers:
- Bluetooth:
- Set Per Platform Antenna Gain (PPAG) for Intel controllers.
- Ethernet NICs:
- Intel (1G, igc):
- support TSN / Qbv / packet scheduling features of i226 model
- Intel (100G, ice):
- use GNSS subsystem instead of TTY
- multi-buffer XDP support
- extend support for GPIO pins to E823 devices
- nVidia/Mellanox:
- update the shared buffer configuration on PFC commands
- implement PTP adjphase function for HW offset control
- TC support for Geneve and GRE with VF tunnel offload
- more efficient crypto key management method
- multi-port eswitch support
- Netronome/Corigine:
- add DCB IEEE support
- support IPsec offloading for NFP3800
- Freescale/NXP (enetc):
- support XDP_REDIRECT for XDP non-linear buffers
- improve reconfig, avoid link flap and waiting for idle
- support MAC Merge layer
- Other NICs:
- sfc/ef100: add basic devlink support for ef100
- ionic: rx_push mode operation (writing descriptors via MMIO)
- bnxt: use the auxiliary bus abstraction for RDMA
- r8169: disable ASPM and reset bus in case of tx timeout
- cpsw: support QSGMII mode for J721e CPSW9G
- cpts: support pulse-per-second output
- ngbe: add an mdio bus driver
- usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
- r8152: handle devices with FW with NCM support
- amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
- virtio-net: support multi buffer XDP
- virtio/vsock: replace virtio_vsock_pkt with sk_buff
- tsnep: XDP support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add support for latency TLV (in FW control messages)
- Microchip (sparx5):
- separate explicit and implicit traffic forwarding rules, make
the implicit rules always active
- add support for egress DSCP rewrite
- IS0 VCAP support (Ingress Classification)
- IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
etc.)
- ES2 VCAP support (Egress Access Control)
- support for Per-Stream Filtering and Policing (802.1Q,
8.6.5.1)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- add MAB (port auth) offload support
- enable PTP receive for mv88e6390
- NXP (ocelot):
- support MAC Merge layer
- support for the the vsc7512 internal copper phys
- Microchip:
- lan9303: convert to PHYLINK
- lan966x: support TC flower filter statistics
- lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
- lan937x: support Credit Based Shaper configuration
- ksz9477: support Energy Efficient Ethernet
- other:
- qca8k: convert to regmap read/write API, use bulk operations
- rswitch: Improve TX timestamp accuracy
- Intel WiFi (iwlwifi):
- EHT (Wi-Fi 7) rate reporting
- STEP equalizer support: transfer some STEP (connection to radio
on platforms with integrated wifi) related parameters from the
BIOS to the firmware.
- Qualcomm 802.11ax WiFi (ath11k):
- IPQ5018 support
- Fine Timing Measurement (FTM) responder role support
- channel 177 support
- MediaTek WiFi (mt76):
- per-PHY LED support
- mt7996: EHT (Wi-Fi 7) support
- Wireless Ethernet Dispatch (WED) reset support
- switch to using page pool allocator
- RealTek WiFi (rtw89):
- support new version of Bluetooth co-existance
- Mobile:
- rmnet: support TX aggregation"
* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
page_pool: add a comment explaining the fragment counter usage
net: ethtool: fix __ethtool_dev_mm_supported() implementation
ethtool: pse-pd: Fix double word in comments
xsk: add linux/vmalloc.h to xsk.c
sefltests: netdevsim: wait for devlink instance after netns removal
selftest: fib_tests: Always cleanup before exit
net/mlx5e: Align IPsec ASO result memory to be as required by hardware
net/mlx5e: TC, Set CT miss to the specific ct action instance
net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
net/mlx5: Refactor tc miss handling to a single function
net/mlx5: Kconfig: Make tc offload depend on tc skb extension
net/sched: flower: Support hardware miss to tc action
net/sched: flower: Move filter handle initialization earlier
net/sched: cls_api: Support hardware miss to tc action
net/sched: Rename user cookie and act cookie
sfc: fix builds without CONFIG_RTC_LIB
sfc: clean up some inconsistent indentings
net/mlx4_en: Introduce flexible array to silence overflow warning
net: lan966x: Fix possible deadlock inside PTP
net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
...
|
||
|
Linus Torvalds
|
36289a03bc |
This update includes the following changes:
API: - Use kmap_local instead of kmap_atomic. - Change request callback to take void pointer. - Print FIPS status in /proc/crypto (when enabled). Algorithms: - Add rfc4106/gcm support on arm64. - Add ARIA AVX2/512 support on x86. Drivers: - Add TRNG driver for StarFive SoC. - Delete ux500/hash driver (subsumed by stm32/hash). - Add zlib support in qat. - Add RSA support in aspeed. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEn51F/lCuNhUwmDeSxycdCkmxi6cFAmPzAiwACgkQxycdCkmx i6et8xAAoO3w5MZFGXMzWsYhfSZFdceXBEQfDR7JOCdHxpMIQhw0FLlb0uttFk6m SeWrdP9wiifBDoCmw7qffFJml8ZftPL/XeXjob2d9v7jKbPyw3lDSIdsNfN/5EEL oIc9915zwrgawvahPAa+PQ4Ue03qRjUyOcV42dpd1W3NYhzDVHoK5OUU+mEFYDvx Sgw/YUugKf0VXkVDFzG5049+CPcheyRZqclAo9jyl2eZiXujgUyV33nxRCtqIA+t 7jlHKwi+6QzFHY0CX5BvShR8xyEuH5MLoU3H/jYGXnRb3nEpRYAEO4VZchIHqF0F Y6pKIKc6Q8OyIVY8RsjQY3hioCqYnQFZ5Xtc1zGtOYEitVLbkmItMG0mVn0XOfyt gJDi6gkEw5uPUbEQdI4R1xEgJ8eCckMsOJ+uRxqTm+uLqNDxPbsB9bohKniMogXV lDlVXjU23AA9VeKtqU8FvWjfgqsN47X4aoq1j4/4aI7X9F7P9FOP21TZloP7+ssj PFrzNaRXUrMEsvyS1wqPegIh987lj6WkH4hyU0wjzaIq4IQELidHsSXFS12iWIPH kTEoC/trAVoYSr0zXKWUCs4h/x0FztVNbjs4KiDP2FLXX1RzeVZ0WlaXZhryHr+n 1+8yCuS6tVofAbSX0wNkZdf0x5+3CIBw4kqSIvjKDPYYEfIDaT0= =dMYe -----END PGP SIGNATURE----- Merge tag 'v6.3-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto update from Herbert Xu: "API: - Use kmap_local instead of kmap_atomic - Change request callback to take void pointer - Print FIPS status in /proc/crypto (when enabled) Algorithms: - Add rfc4106/gcm support on arm64 - Add ARIA AVX2/512 support on x86 Drivers: - Add TRNG driver for StarFive SoC - Delete ux500/hash driver (subsumed by stm32/hash) - Add zlib support in qat - Add RSA support in aspeed" * tag 'v6.3-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (156 commits) crypto: x86/aria-avx - Do not use avx2 instructions crypto: aspeed - Fix modular aspeed-acry crypto: hisilicon/qm - fix coding style issues crypto: hisilicon/qm - update comments to match function crypto: hisilicon/qm - change function names crypto: hisilicon/qm - use min() instead of min_t() crypto: hisilicon/qm - remove some unused defines crypto: proc - Print fips status crypto: crypto4xx - Call dma_unmap_page when done crypto: octeontx2 - Fix objects shared between several modules crypto: nx - Fix sparse warnings crypto: ecc - Silence sparse warning tls: Pass rec instead of aead_req into tls_encrypt_done crypto: api - Remove completion function scaffolding tls: Remove completion function scaffolding tipc: Remove completion function scaffolding net: ipv6: Remove completion function scaffolding net: ipv4: Remove completion function scaffolding net: macsec: Remove completion function scaffolding dm: Remove completion function scaffolding ... |
||
|
Linus Torvalds
|
69308402ca |
platform-drivers-x86 for v6.3-1
Highlights: - AMD PMC: Improvements to aid s2idle debugging - Dell WMI-DDV: hwmon support - INT3472 camera sensor power-management: Improve privacy LED support - Intel VSEC: Base TPMI (Topology Aware Register and PM Capsule Interface) support - Mellanox: SN5600 and Nvidia L1 switch support - Microsoft Surface Support: Various cleanups + code improvements - tools/intel-speed-select: Various improvements - Miscellaneous other cleanups / fixes The following is an automated git shortlog grouped by driver: Add include/linux/platform_data/x86 to MAINTAINERS: - Add include/linux/platform_data/x86 to MAINTAINERS Documentation/ABI: - Add new attribute for mlxreg-io sysfs interfaces Fix header inclusion in linux/platform_data/x86/soc.h: - Fix header inclusion in linux/platform_data/x86/soc.h HID: - surface-hid: Use target-ID enum instead of hard-coding values MAINTAINERS: - dell-wmi-sysman: drop Divya Bharathi - Add entry for TPMI driver Merge tag 'ib-leds-led_get-v6.3' into HEAD: - Merge tag 'ib-leds-led_get-v6.3' into HEAD acerhdf: - Drop empty platform remove function apple_gmux: - Drop no longer used ACPI_VIDEO Kconfig dependency dell-ddv: - Prefer asynchronous probing - Add hwmon support - Add "force" module param - Replace EIO with ENOMSG - Return error if buffer is empty - Add support for interface version 3 dell-smo8800: - Use min_t() for comparison and assignment dell-wmi-sysman: - Make kobj_type structure constant hp-wmi: - Ignore Win-Lock key events int1092: - Switch to use acpi_evaluate_dsm_typed() int3472/discrete: - add LEDS_CLASS dependency - Drop unnecessary obj->type == string check - Get the polarity from the _DSM entry - Move GPIO request to skl_int3472_register_clock() - Create a LED class device for the privacy LED - Refactor GPIO to sensor mapping intel: - punit_ipc: Drop empty platform remove function - oaktrail: Drop empty platform remove function intel/pmc: - Switch to use acpi_evaluate_dsm_typed() leds: - led-class: Add generic [devm_]led_get() - led-class: Add __devm_led_get() helper - led-class: Add led_module_get() helper - led-class: Add missing put_device() to led_put() media: - v4l2-core: Make the v4l2-core code enable/disable the privacy LED if present nvidia-wmi-ec-backlight: - Add force module parameter platform: - mellanox: mlx-platform: Move bus shift assignment out of the loop - mellanox: mlx-platform: Add mux selection register to regmap - mellanox: Extend all systems with I2C notification callback - mellanox: Split logic in init and exit flow - mellanox: Split initialization procedure - mellanox: Introduce support of new Nvidia L1 switch - mellanox: Introduce support for next-generation 800GB/s switch - mellanox: Cosmetic changes - rename to more common name - mellanox: Change "reset_pwr_converter_fail" attribute - mellanox: Introduce support for rack manager switch platform/mellanox: - mlxreg-hotplug: Allow more flexible hotplug events configuration platform/surface: - Switch to use acpi_evaluate_dsm_typed() - aggregator: Rename top-level request functions to avoid ambiguities - aggregator_registry: Fix target-ID of base-hub - aggregator: Enforce use of target-ID enum in device ID macros - dtx: Use target-ID enum instead of hard-coding values - aggregator_tabletsw: Use target-ID enum instead of hard-coding values - aggregator_hub: Use target-ID enum instead of hard-coding values - aggregator: Add target and source IDs to command trace events - aggregator: Improve documentation and handling of message target and source IDs platform/x86/amd: - pmc: Add line break for readability - pmc: differentiate STB/SMU messaging prints - pmc: Write dummy postcode into the STB DRAM - pmc: Add num_samples message id support to STB platform/x86/amd/pmf: - Add depends on CONFIG_POWER_SUPPLY platform/x86/intel: - Intel TPMI enumeration driver platform/x86/intel/tpmi: - ADD tpmi external interface for tpmi feature drivers - Process CPU package mapping platform/x86/intel/vsec: - Use mutex for ida_alloc() and ida_free() - Support private data - Enhance and Export intel_vsec_add_aux() - Add TPMI ID platform_data/mlxreg: - Add field with mapped resource address think-lmi: - Make kobj_type structure constant - Use min_t() for comparison and assignment tools/power/x86/intel-speed-select: - v1.14 release - Adjust uncore max/min frequency - Add Emerald Rapid quirk - Fix display of uncore min frequency - turbo-freq auto mode with SMT off - cpufreq reads on offline CPUs - Use null-terminated string - Remove duplicate dup() - Handle open() failure case - Remove unused non_block flag - Remove wrong check in set_isst_id() x86/platform/uv: - Make kobj_type structure constant -----BEGIN PGP SIGNATURE----- iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmPzRpgUHGhkZWdvZWRl QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9wYPwf+I6PP0XBg8MrivLc2DHklVojUU0aX /M0LbCP8gxCDdyisV8swC3e848riaTchYlUGASPZu0ieas1U7KsDvghkiittNvlI U+0h7TbkOQNymM8oE0oauflH4W5KwCXGrLsJWVkGk0lhJd6WmjXkjWLkruaXazLd kc5fq0QyzRVzhhCtocQ7qhIgXSZyKYx433VqbDR7/SUi5F2wkC9JbGY02maKWaK3 4lQaoyMKLjGlDr9YVv+UHTwLoXwP0mW/fjlsZ3Xz5lz6WfihQzPuOrl/10mRj0Ez eP9dlF1Dipee4BYS2FM5dtk5xPpqdVqRlQUX2qKzyDNTSx5wdtJnv8j/cg== =VoXq -----END PGP SIGNATURE----- Merge tag 'platform-drivers-x86-v6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver updates from Hans de Goede: - AMD PMC: Improvements to aid s2idle debugging - Dell WMI-DDV: hwmon support - INT3472 camera sensor power-management: Improve privacy LED support - Intel VSEC: Base TPMI (Topology Aware Register and PM Capsule Interface) support - Mellanox: SN5600 and Nvidia L1 switch support - Microsoft Surface Support: Various cleanups + code improvements - tools/intel-speed-select: Various improvements - Miscellaneous other cleanups / fixes * tag 'platform-drivers-x86-v6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (80 commits) platform/x86: nvidia-wmi-ec-backlight: Add force module parameter platform/x86/amd/pmf: Add depends on CONFIG_POWER_SUPPLY platform/x86: dell-ddv: Prefer asynchronous probing platform/x86: dell-ddv: Add hwmon support Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces platform: mellanox: mlx-platform: Move bus shift assignment out of the loop platform: mellanox: mlx-platform: Add mux selection register to regmap platform_data/mlxreg: Add field with mapped resource address platform/mellanox: mlxreg-hotplug: Allow more flexible hotplug events configuration platform: mellanox: Extend all systems with I2C notification callback platform: mellanox: Split logic in init and exit flow platform: mellanox: Split initialization procedure platform: mellanox: Introduce support of new Nvidia L1 switch platform: mellanox: Introduce support for next-generation 800GB/s switch platform: mellanox: Cosmetic changes - rename to more common name platform: mellanox: Change "reset_pwr_converter_fail" attribute platform: mellanox: Introduce support for rack manager switch MAINTAINERS: dell-wmi-sysman: drop Divya Bharathi x86/platform/uv: Make kobj_type structure constant platform/x86: think-lmi: Make kobj_type structure constant ... |
||
|
Linus Torvalds
|
5f5ce6bcfc |
chrome platform changes for 6.3
* New drivers - Driver cros_ec_uart for ChromeOS EC protocol over UART. - Driver cros_typec_vdm for USB PD Vendor Defined Message. * Improvements - Preserve logs as much as possible when EC panic. - Shutdown to refrain from potential HW damages when EC panic. * Fixes - Fix DP_PORT_VDO to include DP_CAP_RECEPTACLE. - Fix a lockdep false positive. * Cleanups - Use sysfs_emit*() instead of scnprintf(). - Use asm instead of asm-generic for unaligned.h. * Misc - Rename module name from cros_ec_typec to cros-ec-typec. - Minor fixes. -----BEGIN PGP SIGNATURE----- iIkEABYIADEWIQS0yQeDP3cjLyifNRUrxTEGBto89AUCY+n3NxMcdHp1bmdiaUBr ZXJuZWwub3JnAAoJECvFMQYG2jz0aF8A/RBFKFEJrKj1AkPlgSHnhCr41SmEsrqg MaAH2x6Nw8YqAQCjSbJmanSzOHCO5HXF1P11elTNgqH0KT6/Xw/LIcL5Dw== =pAno -----END PGP SIGNATURE----- Merge tag 'tag-chrome-platform-for-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux Pull chrome platform updates from Tzung-Bi Shih: "New drivers: - cros_ec_uart for ChromeOS EC protocol over UART - cros_typec_vdm for USB PD Vendor Defined Message Improvements: - Preserve logs as much as possible when EC panics - Shutdown to refrain from potential HW damages when EC panics Fixes: - Fix DP_PORT_VDO to include DP_CAP_RECEPTACLE - Fix a lockdep false positive Cleanups: - Use sysfs_emit*() instead of scnprintf() - Use asm instead of asm-generic for unaligned.h Misc: - Rename module name from cros_ec_typec to cros-ec-typec - Minor fixes" * tag 'tag-chrome-platform-for-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: (34 commits) platform/chrome: cros_ec_typec: Fix spelling mistake platform/chrome: cros_typec_vdm: Add Attention support platform/chrome: cros_ec: Add VDM attention headers platform/chrome: cros_typec_vdm: Fix VDO copy platform/chrome: cros_ec_typec: allow deferred probe of switch handles platform/chrome: cros_ec_proto: remove big stub objects from stack platform/chrome: cros_ec_uart: fix negative type promoted to high platform/chrome: cros_ec: Use per-device lockdep key platform/chrome: fix kernel-doc warnings for cros_ec_command platform/chrome: fix kernel-doc warning for last_resume_result platform/chrome: fix kernel-doc warning for suspend_timeout_ms platform/chrome: fix kernel-doc warnings for panic notifier platform/chrome: cros_ec_lpc: initialize the buf variable platform/chrome: cros_ec: Fix panic notifier registration platform/chrome: cros_typec_switch: Check for retimer flag platform/chrome: cros_typec_switch: Use fwnode* prop check platform/chrome: cros_typec_vdm: Add VDM send support platform/chrome: cros_typec_vdm: Add VDM reply support platform/chrome: cros_ec_typec: Add initial VDM support platform/chrome: cros_ec_typec: Alter module name with hyphens ... |
||
|
Linus Torvalds
|
239451e903 |
xen: branch for v6.3-rc1
-----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCY/GzaAAKCRCAXGG7T9hj vhgtAP96ax9EV49/kCST52z9yGfGUA+giq/9Jm6bwHlP3PZXVAD/Wfhfp1HbxzFp CqXG7veXU+uGVP3lbpbYKNPV9DIOdgQ= =K+0Q -----END PGP SIGNATURE----- Merge tag 'for-linus-6.3-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from Juergen Gross: - help deprecate the /proc/xen files by making the related information available via sysfs - mark the Xen variants of play_dead "noreturn" - support a shared Xen platform interrupt - several small cleanups and fixes * tag 'for-linus-6.3-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: sysfs: make kobj_type structure constant x86/Xen: drop leftover VM-assist uses xen: Replace one-element array with flexible-array member xen/grant-dma-iommu: Implement a dummy probe_device() callback xen/pvcalls-back: fix permanently masked event channel xen: Allow platform PCI interrupt to be shared x86/xen/time: prefer tsc as clocksource when it is invariant x86/xen: mark xen_pv_play_dead() as __noreturn x86/xen: don't let xen_pv_play_dead() return drivers/xen/hypervisor: Expose Xen SIF flags to userspace |
||
|
Linus Torvalds
|
b8878e5a5c |
hyperv-next for v6.3.
-----BEGIN PGP SIGNATURE----- iQFHBAABCAAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmPzgDgTHHdlaS5saXVA a2VybmVsLm9yZwAKCRB2FHBfkEGgXrc7CACfG4SSd8KkWU/y8Q66Irxdau0a3ETD KL4UNRKGIyKujufgFsme79O6xVSSsCNSay449wk20hqn8lnwbSRi9pUwmLn29hfd CMFleWIqgwGFfC1do5DRF1vrt1siuG/jVE07mWsEwuY2iHx/es+H7LiQKidhkndZ DhXRqoi7VYiJv5fRSumpkUJrMZiI96o9Mk09HUksdMwCn3+7RQEqHnlTH5KOozKF iMroDB72iNw5Na/USZwWL2EDRptENam3lFkPBeDPqNw0SbG4g65JGPR9DSa0Lkbq AGCJQkdU33mcYQG5MY7R4K1evufpOl/apqLW7h92j45Znr9ok6Vr2c1R =J1VT -----END PGP SIGNATURE----- Merge tag 'hyperv-next-signed-20230220' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyperv updates from Wei Liu: - allow Linux to run as the nested root partition for Microsoft Hypervisor (Jinank Jain and Nuno Das Neves) - clean up the return type of callback functions (Dawei Li) * tag 'hyperv-next-signed-20230220' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: x86/hyperv: Fix hv_get/set_register for nested bringup Drivers: hv: Make remove callback of hyperv driver void returned Drivers: hv: Enable vmbus driver for nested root partition x86/hyperv: Add an interface to do nested hypercalls Drivers: hv: Setup synic registers in case of nested root partition x86/hyperv: Add support for detecting nested hypervisor |
||
|
Linus Torvalds
|
8bf1a529cd |
arm64 updates for 6.3:
- Support for arm64 SME 2 and 2.1. SME2 introduces a new 512-bit architectural register (ZT0, for the look-up table feature) that Linux needs to save/restore. - Include TPIDR2 in the signal context and add the corresponding kselftests. - Perf updates: Arm SPEv1.2 support, HiSilicon uncore PMU updates, ACPI support to the Marvell DDR and TAD PMU drivers, reset DTM_PMU_CONFIG (ARM CMN) at probe time. - Support for DYNAMIC_FTRACE_WITH_CALL_OPS on arm64. - Permit EFI boot with MMU and caches on. Instead of cleaning the entire loaded kernel image to the PoC and disabling the MMU and caches before branching to the kernel bare metal entry point, leave the MMU and caches enabled and rely on EFI's cacheable 1:1 mapping of all of system RAM to populate the initial page tables. - Expose the AArch32 (compat) ELF_HWCAP features to user in an arm64 kernel (the arm32 kernel only defines the values). - Harden the arm64 shadow call stack pointer handling: stash the shadow stack pointer in the task struct on interrupt, load it directly from this structure. - Signal handling cleanups to remove redundant validation of size information and avoid reading the same data from userspace twice. - Refactor the hwcap macros to make use of the automatically generated ID registers. It should make new hwcaps writing less error prone. - Further arm64 sysreg conversion and some fixes. - arm64 kselftest fixes and improvements. - Pointer authentication cleanups: don't sign leaf functions, unify asm-arch manipulation. - Pseudo-NMI code generation optimisations. - Minor fixes for SME and TPIDR2 handling. - Miscellaneous updates: ARCH_FORCE_MAX_ORDER is now selectable, replace strtobool() to kstrtobool() in the cpufeature.c code, apply dynamic shadow call stack in two passes, intercept pfn changes in set_pte_at() without the required break-before-make sequence, attempt to dump all instructions on unhandled kernel faults. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE5RElWfyWxS+3PLO2a9axLQDIXvEFAmP0/QsACgkQa9axLQDI XvG+gA/+JDVEH9wRzAIZvbp9hSuohPc48xgAmIMP1eiVB0/5qeRjYAJwS33H0rXS BPC2kj9IBy/eQeM9ICg0nFd0zYznSVacITqe6NrqeJ1F+ftS4rrHdfxd+J7kIoCs V2L8e+BJvmHdhmNV2qMAgJdGlfxfQBA7fv2cy52HKYcouoOh1AUVR/x+yXVXAsCd qJP3+dlUKccgm/oc5unEC1eZ49u8O+EoasqOyfG6K5udMgzhEX3K6imT9J3hw0WT UjstYkx5uGS/prUrRCQAX96VCHoZmzEDKtQuHkHvQXEYXsYPF3ldbR2CziNJnHe7 QfSkjJlt8HAtExA+BkwEe9i0MQO/2VF5qsa2e4fA6l7uqGu3LOtS/jJd23C9n9fR Id8aBMeN6S8+MjqRA9L2uf4t6e4ISEHoG9ZRdc4WOwloxEEiJoIeun+7bHdOSZLj AFdHFCz4NXiiwC0UP0xPDI2YeCLqt5np7HmnrUqwzRpVO8UUagiJD8TIpcBSjBN9 J68eidenHUW7/SlIeaMKE2lmo8AUEAJs9AorDSugF19/ThJcQdx7vT2UAZjeVB3j 1dbbwajnlDOk/w8PQC4thFp5/MDlfst0htS3WRwa+vgkweE2EAdTU4hUZ8qEP7FQ smhYtlT1xUSTYDTqoaG/U2OWR6/UU79wP0jgcOsHXTuyYrtPI/Q= =VmXL -----END PGP SIGNATURE----- Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Catalin Marinas: - Support for arm64 SME 2 and 2.1. SME2 introduces a new 512-bit architectural register (ZT0, for the look-up table feature) that Linux needs to save/restore - Include TPIDR2 in the signal context and add the corresponding kselftests - Perf updates: Arm SPEv1.2 support, HiSilicon uncore PMU updates, ACPI support to the Marvell DDR and TAD PMU drivers, reset DTM_PMU_CONFIG (ARM CMN) at probe time - Support for DYNAMIC_FTRACE_WITH_CALL_OPS on arm64 - Permit EFI boot with MMU and caches on. Instead of cleaning the entire loaded kernel image to the PoC and disabling the MMU and caches before branching to the kernel bare metal entry point, leave the MMU and caches enabled and rely on EFI's cacheable 1:1 mapping of all of system RAM to populate the initial page tables - Expose the AArch32 (compat) ELF_HWCAP features to user in an arm64 kernel (the arm32 kernel only defines the values) - Harden the arm64 shadow call stack pointer handling: stash the shadow stack pointer in the task struct on interrupt, load it directly from this structure - Signal handling cleanups to remove redundant validation of size information and avoid reading the same data from userspace twice - Refactor the hwcap macros to make use of the automatically generated ID registers. It should make new hwcaps writing less error prone - Further arm64 sysreg conversion and some fixes - arm64 kselftest fixes and improvements - Pointer authentication cleanups: don't sign leaf functions, unify asm-arch manipulation - Pseudo-NMI code generation optimisations - Minor fixes for SME and TPIDR2 handling - Miscellaneous updates: ARCH_FORCE_MAX_ORDER is now selectable, replace strtobool() to kstrtobool() in the cpufeature.c code, apply dynamic shadow call stack in two passes, intercept pfn changes in set_pte_at() without the required break-before-make sequence, attempt to dump all instructions on unhandled kernel faults * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (130 commits) arm64: fix .idmap.text assertion for large kernels kselftest/arm64: Don't require FA64 for streaming SVE+ZA tests kselftest/arm64: Copy whole EXTRA context arm64: kprobes: Drop ID map text from kprobes blacklist perf: arm_spe: Print the version of SPE detected perf: arm_spe: Add support for SPEv1.2 inverted event filtering perf: Add perf_event_attr::config3 arm64/sme: Fix __finalise_el2 SMEver check drivers/perf: fsl_imx8_ddr_perf: Remove set-but-not-used variable arm64/signal: Only read new data when parsing the ZT context arm64/signal: Only read new data when parsing the ZA context arm64/signal: Only read new data when parsing the SVE context arm64/signal: Avoid rereading context frame sizes arm64/signal: Make interface for restore_fpsimd_context() consistent arm64/signal: Remove redundant size validation from parse_user_sigframe() arm64/signal: Don't redundantly verify FPSIMD magic arm64/cpufeature: Use helper macros to specify hwcaps arm64/cpufeature: Always use symbolic name for feature value in hwcaps arm64/sysreg: Initial unsigned annotations for ID registers arm64/sysreg: Initial annotation of signed ID registers ... |
||
|
Linus Torvalds
|
b327dfe052 |
ARM udpates for 6.3-rc1
- Improve Kconfig help text for Cortex A8 and Cortex A9 errata - Kconfig spelling and grammar fixes - Allow kernel-mode VFP/Neon in softirq context - Use Neon in softirq context - Implement AES-CTR/GHASH version of GCM -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEuNNh8scc2k/wOAE+9OeQG+StrGQFAmP0w4IACgkQ9OeQG+St rGRJJhAAnfBwqXA9FFToKt3dzLWUKcHM0wB0K1ABGJVovL1LZY1kDjVZ/nkJMlYn 2MCf7ImEv8k8QRRi1O3YjnAJ9JrIM2e5sEcPPzFAzcfxjdYQ7scfQZOE+4HU0i35 MxSoUp9nrF69rs4aL3sUNGoUoOmpvmMbeeYu/FTL0jWbr1ywfsn8JaXRwk9Xrfqw R/kWbDpIYmtG8qitv6aMOlSJeagxvo9PooIgd9u2OeCkl30jfuU/nqaHwuJEPzRh d+WYx4xC6twAORNc9odUqNOPIng2w2Tt99ChYAhvtcF5twW9baFiajK5kHL71Ykm 0y8RxdNP8aNuyP/XCABJkY87lnCNP0l4fIvWRPu+W5MWQMpdKE6+y5EK17rksk3Y zyV1v6ca9twK1HQs13xUgIRTQ5dYYwrEoSBhcBb5KhwYdP/xqx6FmES47gsGQWBg d6ammthp9zeMfJp/oiYvg4ZLsxSxH+kjNyqaTjJaSAsX4z8fH5onlxn+6r43tsTc nKEqCWBNhW0M3vFghuSHacxjGfWDhBarWmdGgXSQt0MNmvcY6YcHHO9blUHkShW/ FvsdqXFJYnTgv83zQPwrzPd7IG/8ytA0bxxH9prhbdEu3Xb0XtwxGpgDFmLH7d/B MDbda3vD319hpnxjOOSjzvcrJtJsSYBVZyVilcrRsvb6t5GQgdQ= =Wdob -----END PGP SIGNATURE----- Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm Pull ARM udpates from Russell King: - Improve Kconfig help text for Cortex A8 and Cortex A9 errata - Kconfig spelling and grammar fixes - Allow kernel-mode VFP/Neon in softirq context - Use Neon in softirq context - Implement AES-CTR/GHASH version of GCM * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 9289/1: Allow pre-ARMv5 builds with ld.lld 16.0.0 and newer ARM: 9288/1: Kconfigs: fix spelling & grammar ARM: 9286/1: crypto: Implement fused AES-CTR/GHASH version of GCM ARM: 9285/1: remove meaningless arch/arm/mach-rda/Makefile ARM: 9283/1: permit non-nested kernel mode NEON in softirq context ARM: 9282/1: vfp: Manipulate task VFP state with softirqs disabled ARM: 9281/1: improve Cortex A8/A9 errata help text |
||
|
Linus Torvalds
|
eb6d5bbea2 |
m68k updates for v6.3
- Add seccomp support, - Defconfig updates, - Miscellaneous fixes and improvements. -----BEGIN PGP SIGNATURE----- iIsEABYIADMWIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCY/NpwhUcZ2VlcnRAbGlu dXgtbTY4ay5vcmcACgkQisJQ/WRJ8XB/LgD+OndW88TM184loE00WEECzgJjaOi6 /3MMHLp/KtjNuIMA/j5V3aM+s33rExNu7b14D1aXC4FYdB7VnMVJ+Xk2cHcH =xCVc -----END PGP SIGNATURE----- Merge tag 'm68k-for-v6.3-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k Pull m68k updates from Geert Uytterhoeven: - Add seccomp support - defconfig updates - Miscellaneous fixes and improvements * tag 'm68k-for-v6.3-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: /proc/hardware should depend on PROC_FS selftests/seccomp: Add m68k support m68k: Add kernel seccomp support m68k: Check syscall_trace_enter() return code m68k: defconfig: Update defconfigs for v6.2-rc3 m68k: q40: Do not initialise statics to 0 |
||
|
Linus Torvalds
|
bcf5470eb4 |
s390 updates for 6.3 merge window
- Large cleanup of the con3270/tty3270 driver. Among others this fixes:
* Background Color Support
* ASCII Line Character Support
* VT100 Support
* Geometries other than 80x24
- Cleanup and improve cmpxchg() code. Also add cmpxchg_user_key() to
uaccess functions, which will be used by KVM to access KVM guest memory
with a specific storage key.
- Add support for user space events counting to CPUMF.
- Cleanup the vfio/ccw code, which also allows now to properly support 2K
Format-2 IDALs.
- Move kernel page table allocation and initialization to decompressor,
which finally allows to enter the kernel with dynamic address translation
enabled. This in turn allows to get rid of code with special handling in
the kernel, which has to distinguish if DAT is on or off.
- Replace kretprobe with rethook.
- Various improvements to vfio/ap queue resets:
* Use TAPQ to verify completion of a reset in progress rather than
multiple invocations of ZAPQ.
* Check TAPQ response codes when verifying successful completion of ZAPQ.
* Fix erroneous handling of some error response codes.
* Increase the maximum amount of time to wait for successful completion
of ZAPQ.
- Rework system call wrappers to get rid of alias functions, which were
only left on s390.
- Cleanup diag288_wdt watchdog driver. It has been agreed on with Guenter
Roeck that this goes upstream via the s390 tree.
- Add missing loadparm parameter handling for list-directed ECKD ipl/reipl.
- Various improvements to memory detection code.
- Remove arch_cpu_idle_time() since the current implementation is broken,
and allows user space observable accounted idle times which can
temporarily decrease.
- Add Reset DAT-Protection support: (only) allow to change PTEs from RO to
RW with a new RDP instruction. Unlike the currently used IPTE
instruction, this does not necessarily guarantee that TLBs of all CPUs
are synchronously flushed; and that remote CPUs can see spurious
protection faults. The overall improvement for not requiring an all CPU
synchronization, like it is required with IPTE, should be beneficial.
- Fix KFENCE page fault reporting.
- Smaller cleanups and improvement all over the place.
-----BEGIN PGP SIGNATURE-----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=MW9x
-----END PGP SIGNATURE-----
Merge tag 's390-6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Heiko Carstens:
- Large cleanup of the con3270/tty3270 driver. Among others this fixes:
- Background Color Support
- ASCII Line Character Support
- VT100 Support
- Geometries other than 80x24
- Cleanup and improve cmpxchg() code. Also add cmpxchg_user_key() to
uaccess functions, which will be used by KVM to access KVM guest
memory with a specific storage key
- Add support for user space events counting to CPUMF
- Cleanup the vfio/ccw code, which also allows now to properly support
2K Format-2 IDALs
- Move kernel page table allocation and initialization to decompressor,
which finally allows to enter the kernel with dynamic address
translation enabled. This in turn allows to get rid of code with
special handling in the kernel, which has to distinguish if DAT is on
or off
- Replace kretprobe with rethook
- Various improvements to vfio/ap queue resets:
- Use TAPQ to verify completion of a reset in progress rather than
multiple invocations of ZAPQ.
- Check TAPQ response codes when verifying successful completion of
ZAPQ.
- Fix erroneous handling of some error response codes.
- Increase the maximum amount of time to wait for successful
completion of ZAPQ
- Rework system call wrappers to get rid of alias functions, which were
only left on s390
- Cleanup diag288_wdt watchdog driver. It has been agreed on with
Guenter Roeck that this goes upstream via the s390 tree
- Add missing loadparm parameter handling for list-directed ECKD
ipl/reipl
- Various improvements to memory detection code
- Remove arch_cpu_idle_time() since the current implementation is
broken, and allows user space observable accounted idle times which
can temporarily decrease
- Add Reset DAT-Protection support: (only) allow to change PTEs from RO
to RW with a new RDP instruction. Unlike the currently used IPTE
instruction, this does not necessarily guarantee that TLBs of all
CPUs are synchronously flushed; and that remote CPUs can see spurious
protection faults. The overall improvement for not requiring an all
CPU synchronization, like it is required with IPTE, should be
beneficial
- Fix KFENCE page fault reporting
- Smaller cleanups and improvement all over the place
* tag 's390-6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (182 commits)
s390/irq,idle: simplify idle check
s390/processor: add test_and_set_cpu_flag() and test_and_clear_cpu_flag()
s390/processor: let cpu helper functions return boolean values
s390/kfence: fix page fault reporting
s390/zcrypt: introduce ctfm field in struct CPRBX
s390: remove confusing comment from uapi types header file
vfio/ccw: remove WARN_ON during shutdown
s390/entry: remove toolchain dependent micro-optimization
s390/mem_detect: do not truncate online memory ranges info
s390/vx: remove __uint128_t type from __vector128 struct again
s390/mm: add support for RDP (Reset DAT-Protection)
s390/mm: define private VM_FAULT_* reasons from top bits
Documentation: s390: correct spelling
s390/ap: fix status returned by ap_qact()
s390/ap: fix status returned by ap_aqic()
s390: vfio-ap: tighten the NIB validity check
Revert "s390/mem_detect: do not update output parameters on failure"
s390/idle: remove arch_cpu_idle_time() and corresponding code
s390/vx: use simple assignments to access __vector128 members
s390/vx: add 64 and 128 bit members to __vector128 struct
...
|
||
|
Linus Torvalds
|
877934769e |
- Cache the AMD debug registers in per-CPU variables to avoid MSR writes
where possible, when supporting a debug registers swap feature for SEV-ES guests - Add support for AMD's version of eIBRS called Automatic IBRS which is a set-and-forget control of indirect branch restriction speculation resources on privilege change - Add support for a new x86 instruction - LKGS - Load kernel GS which is part of the FRED infrastructure - Reset SPEC_CTRL upon init to accomodate use cases like kexec which rediscover - Other smaller fixes and cleanups -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmP1RDIACgkQEsHwGGHe VUohBw//ZB9ZRqsrKdm6D9YaP2x4Zb+kqKqo6rjYeWaYqyPyCwDujPwh+pb3Oq1t aj62muDv1t/wEJc8mKNkfXkjEEtBVAOcpb5YIpKreoEvNKyevol83Ih0u5iJcTRE E5qf8HDS8b/JZrcazJJLl6WQmQNH5RiKSu5bbCpRhoeOcyo5pRYR5MztK9vNmAQk GMdwHsUSU+jN8uiE4HnpaOb/luhgFindRwZVTpdjJegQWLABS8cl3CKeTv4+PW45 isvv37XnQP248wsptIEVRHeG6g3g/HtvwRx7DikUw06QwUyUK7H9hJssOoSP8TL9 u4psRwfWnJ1OxU6klL+s0Ii+pjQ97wXmK/oqK7QkdUwhWqR/mQAW2e9kWHAngyDn A6mKbzSM6HFAeSXQpB9cMb6uvYRD44SngDFe3WXtEK8jiiQ70ikUm4E28I5KJOPg s+RyioHk0NFRHYSOOBqNG1NKz6ED7L3GbgbbzxkgMh21AAyI3X351t+PtGoLV5ew eqOsM7lbg9Scg1LvPk1JcoALS8USWqgar397rz9qGUs+OkPWBtEBCmTdMz/Eb+2t g/WHdLS5/ajSs5gNhT99W3DeqZMPDEkgBRSeyBBmY3CUD3gBL2wXEktRXv504zBR RC4oyUPX3c9E2ib6GATLE3kBLbcz9hTWbMxF+X3lLJvTVd/Qc2o= =v/ZC -----END PGP SIGNATURE----- Merge tag 'x86_cpu_for_v6.3_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cpuid updates from Borislav Petkov: - Cache the AMD debug registers in per-CPU variables to avoid MSR writes where possible, when supporting a debug registers swap feature for SEV-ES guests - Add support for AMD's version of eIBRS called Automatic IBRS which is a set-and-forget control of indirect branch restriction speculation resources on privilege change - Add support for a new x86 instruction - LKGS - Load kernel GS which is part of the FRED infrastructure - Reset SPEC_CTRL upon init to accomodate use cases like kexec which rediscover - Other smaller fixes and cleanups * tag 'x86_cpu_for_v6.3_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/amd: Cache debug register values in percpu variables KVM: x86: Propagate the AMD Automatic IBRS feature to the guest x86/cpu: Support AMD Automatic IBRS x86/cpu, kvm: Add the SMM_CTL MSR not present feature x86/cpu, kvm: Add the Null Selector Clears Base feature x86/cpu, kvm: Move X86_FEATURE_LFENCE_RDTSC to its native leaf x86/cpu, kvm: Add the NO_NESTED_DATA_BP feature KVM: x86: Move open-coded CPUID leaf 0x80000021 EAX bit propagation code x86/cpu, kvm: Add support for CPUID_80000021_EAX x86/gsseg: Add the new <asm/gsseg.h> header to <asm/asm-prototypes.h> x86/gsseg: Use the LKGS instruction if available for load_gs_index() x86/gsseg: Move load_gs_index() to its own new header file x86/gsseg: Make asm_load_gs_index() take an u16 x86/opcode: Add the LKGS instruction to x86-opcode-map x86/cpufeature: Add the CPU feature bit for LKGS x86/bugs: Reset speculation control settings on init x86/cpu: Remove redundant extern x86_read_arch_cap_msr() |
||
Dave Hansen
|
74e19ef0ff |
uaccess: Add speculation barrier to copy_from_user()
The results of "access_ok()" can be mis-speculated. The result is that you can end speculatively: if (access_ok(from, size)) // Right here even for bad from/size combinations. On first glance, it would be ideal to just add a speculation barrier to "access_ok()" so that its results can never be mis-speculated. But there are lots of system calls just doing access_ok() via "copy_to_user()" and friends (example: fstat() and friends). Those are generally not problematic because they do not _consume_ data from userspace other than the pointer. They are also very quick and common system calls that should not be needlessly slowed down. "copy_from_user()" on the other hand uses a user-controller pointer and is frequently followed up with code that might affect caches. Take something like this: if (!copy_from_user(&kernelvar, uptr, size)) do_something_with(kernelvar); If userspace passes in an evil 'uptr' that *actually* points to a kernel addresses, and then do_something_with() has cache (or other) side-effects, it could allow userspace to infer kernel data values. Add a barrier to the common copy_from_user() code to prevent mis-speculated values which happen after the copy. Also add a stub for architectures that do not define barrier_nospec(). This makes the macro usable in generic code. Since the barrier is now usable in generic code, the x86 #ifdef in the BPF code can also go away. Reported-by: Jordy Zomer <jordyzomer@google.com> Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Daniel Borkmann <daniel@iogearbox.net> # BPF bits Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |