IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The current HuC status getparam return values are a bit confusing in
regards to what happens in some scenarios. In particular, most of the
error cases cause the ioctl to return an error, but a couple of them,
INIT_FAIL and LOAD_FAIL, are not explicitly handled and neither is
their expected return value documented; these 2 error cases therefore
end up into the catch-all umbrella of the "HuC not loaded" case, with
this case therefore including both some error scenarios and the load
in progress one.
The updates included in this patch change the handling so that all
error cases behave the same way, i.e. return an errno code, and so
that the HuC load in progress case is unambiguous.
The patch also includes a small change to the FW init path to make sure
we always transition to an error state if something goes wrong.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Tony Ye <tony.ye@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: Tony Ye <tony.ye@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220928004145.745803-14-daniele.ceraolospurio@intel.com
Wait on the fence to be signalled to avoid the submissions finding HuC
not yet loaded.
v2: use dedicaded wait_queue_entry for waiting in HuC load, as submitq
can't be re-used for it.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tony Ye <tony.ye@intel.com>
Acked-by: Tony Ye <tony.ye@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220928004145.745803-13-daniele.ceraolospurio@intel.com
Given that HuC load is delayed on DG2, this patch adds support for a fence
that can be used to wait for load completion. No waiters are added in this
patch (they're coming up in the next one), to keep the focus of the
patch on the tracking logic.
The full HuC loading flow on boot DG2 is as follows:
1) i915 exports the GSC as an aux device;
2) the mei-gsc driver is loaded on the aux device;
3) the mei-pxp component is loaded;
4) mei-pxp calls back into i915 and we load the HuC.
Between steps 1 and 2 there can be several seconds of gap, mainly due to
the kernel doing other work during the boot.
The resume flow is slightly different, because we don't need to
re-expose or re-probe the aux device, so we go directly to step 3 once
i915 and mei-gsc have completed their resume flow.
Here's an example of the boot timing, captured with some logs added to
i915:
[ 17.908307] [drm] adding GSC device
[ 17.915717] [drm] i915 probe done
[ 22.282917] [drm] mei-gsc bound
[ 22.938153] [drm] HuC authenticated
Also to note is that if something goes wrong during GSC HW init the
mei-gsc driver will still bind, but steps 3 and 4 will not happen.
The status tracking is done by registering a bus_notifier to receive a
callback when the mei-gsc driver binds, with a large enough timeout to
account for delays. Once mei-gsc is bound, we switch to a smaller
timeout to wait for the mei-pxp component to load.
The fence is signalled on HuC load complete or if anything goes wrong in
any of the tracking steps. Timeout are enforced via hrtimer callbacks.
v2: fix includes (Jani)
v5: gsc_notifier() remove unneeded ()
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220928004145.745803-12-daniele.ceraolospurio@intel.com
The GSC will perform both the load and the authentication, so we just
need to check the auth bit after the GSC has replied.
Since we require the PXP module to load the HuC, the earliest we can
trigger the load is during the pxp_bind operation.
Note that GSC-loaded HuC survives GT reset, so we need to just mark it
as ready when we re-init the GT HW.
V2: move setting of HuC fw error state to the failure path of the HuC
auth function, so it covers both the legacy and new auth flows
V4:
1. Fix typo in the commit message
2. style fix in intel_huc_wait_for_auth_complete()
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Vitaly Lubart <vitaly.lubart@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220928004145.745803-11-daniele.ceraolospurio@intel.com
Add support for loading HuC via a pxp stream command.
V4:
1. Remove unnecessary include in intel_pxp_huc.h (Jani)
2. Adjust copyright year to 2022
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Vitaly Lubart <vitaly.lubart@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220928004145.745803-10-daniele.ceraolospurio@intel.com
Command to be sent via the stream interface are written to a local
memory page, whose address is then provided to the GSC.
The interface supports providing a full sg with multiple pages for both
input and output messages, but since for now we only aim to support short
and synchronous messages we can use a single page for both input and
output.
Note that the mei interface expects an sg of 4k pages, while our lmem pages
are 64k. If we ever need to support more than 4k we'll need to convert.
Added a TODO comment to the code to record this.
Signed-off-by: Vitaly Lubart <vitaly.lubart@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220928004145.745803-9-daniele.ceraolospurio@intel.com
The mei_pxp module is required to send the command to load authenticate
the HuC to the GSC even if pxp is not in use for protected content
management.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220928004145.745803-8-daniele.ceraolospurio@intel.com
With on-boards graphics card, both i915 and MEI
are in the same device hierarchy with the same parent,
while for discrete gfx card the MEI is its child device.
Adjust the match function for that scenario
by matching MEI parent device with i915.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Vitaly Lubart <vitaly.lubart@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220928004145.745803-7-daniele.ceraolospurio@intel.com
The discrete graphics card with GSC firmware
using command streamer API hence it requires to enhance
pxp module with the new gsc_command() handler.
The handler is implemented via mei_pxp_gsc_command() which is
just a thin wrapper around mei_cldev_send_gsc_command()
Signed-off-by: Vitaly Lubart <vitaly.lubart@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220928004145.745803-6-daniele.ceraolospurio@intel.com
Add mei bus API for sending gsc commands: mei_cldev_send_gsc_command()
The GSC commands are originated in the graphics stack
and are in form of SGL DMA buffers.
The GSC commands are synchronous, the response is received
in the same call on the out sg list buffers.
The function setups pointers for in and out sg lists in the
mei sgl extended header and sends it to the firmware.
Signed-off-by: Vitaly Lubart <vitaly.lubart@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220928004145.745803-5-daniele.ceraolospurio@intel.com
GSC command is and extended header containing a scatter gather
list and without a data buffer. Using MEI_CL_IO_SGL flag,
the caller send the GSC command as a data and the function internally
moves it to the extended header.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Vitaly Lubart <vitaly.lubart@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220928004145.745803-3-daniele.ceraolospurio@intel.com
GSC extend header is of variable size and data
is provided in a sgl list inside the header
and not in the data buffers, need to enable the path.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Vitaly Lubart <vitaly.lubart@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220928004145.745803-2-daniele.ceraolospurio@intel.com
Daniele needs 84d4333c1e28 ("misc/mei: Add NULL check to component match
callback functions") in order to merge the DG2 HuC patches.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Add these extra EHL entries back since we have
drm-tip commit 13d29c823738
("drm/i915/ehl: unconditionally flush the pages on acquire")
introduces proper flushing to make it work as expected.
Cc: Chris Wilson <chris.p.wilson@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Fixes: 046091758b50 ("Revert "drm/i915/ehl: Update MOCS table for EHL"")
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Acked-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220930133223.2757282-1-tejas.upadhyay@intel.com
It's not obvious how the encode/decode of the per platform tables is
done. Document it so while adding tables for new platforms people can be
confident they right things is being done.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220930050903.3479619-3-lucas.demarchi@intel.com
ce->wa_bb_page is allocated only for graphics version 12. However
__gen125_emit_bb_start() is used for any graphics version >= 12.50. For
the currently supported platforms this is not an issue, but for future
ones there's a mismatch causing the jump to
`wa_offset + DG2_PREDICATE_RESULT_BB` to be invalid since wa_offset is
not correct.
As in other places in the driver, check for graphics version "greater or
equal" to future-proof the support for new platforms.
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220930050903.3479619-2-lucas.demarchi@intel.com
As an integrated GPU, MTL does not have local memory and HAS_LMEM()
returns false. However the platform's stolen memory is presented via
BAR2 (i.e., the BAR we traditionally consider to be the GMADR on IGFX)
and should be managed by the driver the same way that local memory is
on dgpu platforms (which includes setting the "lmem" bit on page table
entries). We use the term "local stolen memory" to refer to this
model.
The major difference from the traditional BAR2 (GMADR) is that
the stolen area is mapped via the BAR2 while in the former BAR2 is an
aperture into the GTT VA through which access are made into stolen area.
BSPEC: 53098, 63830
v2:
1. dropped is_dsm_invalid, updated valid_stolen_size check from Lucas
(Jani, Lucas)
2. drop lmembar_is_igpu_stolen
3. revert to referring GFXMEM_BAR as GEN12_LMEM_BAR (Lucas)
v3:(Jani)
1. rename get_mtl_gms_size to mtl_get_gms_size
2. define register for MMIO address
v4:(Matt)
1. Use REG_FIELD_GET to read GMS value
2. replace the calculations with SZ_256M/SZ_8M
v5: Include more details to commit message on how it is different from
earlier platforms (Anshuman)
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: CQ Tang <cq.tang@intel.com>
Signed-off-by: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Original-author: CQ Tang
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220929114658.145287-1-aravind.iddamsetty@intel.com
The part of the media and blitter engine contexts that we care about for
setting up an initial state on MTL are nearly similar to DG2 (and PVC).
The difference being PRT_BB_STATE being replaced with NOP.
For render/compute engines, the part of the context images are nearly
the same, although the layout had a very slight change --- one POSH
register was removed and the placement of some LRI/noops adjusted
slightly to compensate.
v2:
- Dg2, mtl xcs offsets slightly vary. Use a separate offsets array(Bala)
- Add missing nop in xcs offsets(Bala)
v3:
- Fix the spacing for nop in xcs offset(MattR)
v4:
- Fix rcs register offset(MattR)
v4.1:
- Fix commit message(Lucas)
Bspec: 46261, 46260, 45585
Cc: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Cc: Licas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220928155511.2379663-1-radhakrishna.sripada@intel.com
9178e3dcb121 ("mm: discard __GFP_ATOMIC") removed __GFP_ATOMIC,
replacing it with a check for not __GFP_DIRECT_RECLAIM.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220929161404.2769414-1-robdclark@gmail.com
i915_gem_drain_workqueue() call i915_gem_drain_freed_objects()
so no need to call that again.
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220923073515.23093-2-nirmoy.das@intel.com
i915_gem_drain_freed_objects() might not be enough to
free all the objects and RCU delayed work might get
scheduled after the i915 device struct gets freed.
Call i915_gem_drain_workqueue() to catch all RCU delayed work.
Suggested-by: Chris Wilson <chris.p.wilson@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220923073515.23093-1-nirmoy.das@intel.com
A fundamental assumption is that at lower frequencies,
not only do we run slower, but we save power compared to
higher frequencies.
live_slpc_power checks if running at low frequency saves power
v2: re-use code to measure power
fixed cosmetic review comments (Vinay)
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220923110043.789178-4-riana.tauro@intel.com
msm-next for v6.1
DPU:
- simplified VBIF configuration
- cleaned up CTL interfaces to accept indices rather than flush masks
DSI:
- removed unused msm_display_dsc_config struct
- switch regulator calls to new bulk API
- switched to use PANEL_BRIDGE for directly attached panels
DSI PHY:
- converted drivers to use parent_hws instead of parent_names
DP:
- cleaned up pixel_rate handling
HDMI PHY:
- turned hdmi-phy-8996 into OF clk provider
core:
- misc dt-bindings fixes
- choose eDP as primary display if it's available
- support getting interconnects from either the mdss or the mdp5/dpu
device nodes
gpu+gem:
- Shrinker + LRU re-work:
- adds a shared GEM LRU+shrinker helper and moves msm over to that
- reduces lock contention between retire and submit by avoiding the
need to acquire obj lock in retire path (and instead using resv
seeing obj's busyness in the shrinker
- fix reclaim vs submit issues
- GEM fault injection for triggering userspace error paths
- Map/unmap optimization
- Improved robustness for a6xx GPU recovery
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGsrfrr9v1oR9S4oYfOs9jm=jbKQiwPBTrCRHrjYerJJFA@mail.gmail.com
DG2 has issues. To work around one of these the GuC must schedule
apps in an exclusive manner across both RCS and CCS. That is, if a
context from app X is running on RCS then all CCS engines must sit
idle even if there are contexts from apps Y, Z, ... waiting to run. A
certain OS favours RCS to the total starvation of CCS. Linux does not.
Hence the GuC now has a scheduling policy setting to control this
abitration.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220922201209.1446343-2-John.C.Harrison@Intel.com
1. Drop of_gpio header
2. Remove the unneeded result
-----BEGIN PGP SIGNATURE-----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=yZ0D
-----END PGP SIGNATURE-----
Merge tag 'mediatek-drm-next-6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-next
Mediatek DRM Next for Linux 6.1
1. Drop of_gpio header
2. Remove the unneeded result
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220922234804.18557-1-chunkuang.hu@kernel.org
- Use drm_display_info.is_hdmi instead of drm_detect_hdmi_monitor()
for efficiency.
Fixup
- Correct return type of mixer_mode_valid and hdmi_mode_valid functions.
This was reported by Dan Carpenter, https://github.com/ClangBuiltLinux/linux/issues/1703
-----BEGIN PGP SIGNATURE-----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=b5k3
-----END PGP SIGNATURE-----
Merge tag 'exynos-drm-next-for-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next
Cleanup
- Use drm_display_info.is_hdmi instead of drm_detect_hdmi_monitor()
for efficiency.
Fixup
- Correct return type of mixer_mode_valid and hdmi_mode_valid functions.
This was reported by Dan Carpenter, https://github.com/ClangBuiltLinux/linux/issues/1703
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220926020723.270065-1-inki.dae@samsung.com
If attempting to perform a GT reset takes long than 5 seconds (including
resetting the display for gen3/4), then we declare all hope lost and
discard all user work and wedge the device to prevent further
misbehaviour. 5 seconds is too short a time for such drastic action, as
we may be stuck on other timeouts and watchdogs. If we allow a little
bit longer before hitting the big red button, we should at the very
least capture other hung task indicators pointing towards the reason why
the reset was hanging; and allow more marginal cases the extra headroom
to complete the reset without further collateral damage.
Bug: https://gitlab.freedesktop.org/drm/intel/-/issues/6448
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220916204823.1897089-1-ashutosh.dixit@intel.com
The scratch page should never be accessed, and is only assigned as a
filler page to redirection invalid userspace access. It is not of a
performance concern and so we prefer to have a single consistent
configuration across all platforms, reducing the pressure on device
memory and avoiding the direct device access that would be required to
initialise the scratch page.
Signed-off-by: Chris Wilson <chris.p.wilson@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220926155018.109678-1-matthew.auld@intel.com
Now that the scratch page and page directories have a reference back to
the i915_address_space, we cannot do an immediate free of the ppgtt upon
error as those buffer objects will perform a later i915_vm_put in their
deferred frees.
The downside is that by replacing the onion unwind along the error
paths, the ppgtt cleanup must handle a partially constructed vm. This
includes ensuring that the vm->cleanup is set prior to the error path.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6900
Signed-off-by: Chris Wilson <chris.p.wilson@intel.com>
Fixes: 4d8151ae5329 ("drm/i915: Don't free shared locks while shared")
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: <stable@vger.kernel.org> # v5.14+
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220926153333.102195-1-matthew.auld@intel.com
(cherry picked from commit c286558f58535cf97b717b946d6c96d774a09d17)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
We always allocate two DPLLs (TC and TBT) for TC ports. This
is because we can't know ahead of time wherher we need to put
the PHY into DP-Alt or TBT mode.
However during readout we can obviously only read out the state
of the DPLL that the port is actually using. Thus the state after
readout will not have both DPLLs populated.
We run into problems if during readout the TC port is in DP-Alt
mode, but we then perform a modeset on the port without going
through the full .compute_config() machinery, and during said
modeset the port cannot be switched back into DP-Alt mode and
we need to take the TBT fallback path. Such a modeset can
happen eg. due to cdclk reprogramming.
This wasn't a problem earlier because we did all the DPLL
calculations much later in the modeset. So even if flagged
a modeset very late we'd still have gone through the DPLL
calculations. But now all the DPLL calculations happen much
earlier and so we need to deal with it, or else we'll attempt
a modeset without a DPLL.
To guarantee that we always have both DPLLs fully cal/ulated
for TC ports force a full modeset computation during the
initial commit.
v2: Avoid bitwise operation on bool (Jani)
Call the return variable 'fastset' to convey its meaning
Reported-by: Lee Shawn C <shawn.c.lee@intel.com>
Fixes: b000abd3b3d2 ("drm/i915: Do .crtc_compute_clock() earlier")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220922191236.4194-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit eddb4afcb6c533d3f75f5f1a77e292fece27570e)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Commit 00c6cbfd4e8a ("drm/i915: move pipe_mask and cpu_transcoder_mask
to runtime info") moved the pipe_mask member from struct
intel_device_info to intel_runtime_info, but overlooked some of our
platforms initializing device info .display = {}. This is significant,
as pipe_mask is the single point of truth for a device having a display
or not; the platforms in question left pipe_mask to whatever was set for
the platforms they "inherit" from in the complex macro scheme we have.
Add new NO_DISPLAY macro initializing .__runtime.pipe_mask = 0, which
will cause the device info .display sub-struct to be zeroed in
intel_device_info_runtime_init(). A better solution (or simply audit of
proper use of HAS_DISPLAY() checks) is required before moving forward
with [1].
Also clear all the display related members in runtime info if there's no
display. The latter is a bit tedious, but it's for completeness at this
time, to ensure similar functionality as before.
[1] https://lore.kernel.org/r/dfda1bf67f02ceb07c280b7a13216405fd1f7a34.1660137416.git.jani.nikula@intel.com
Fixes: 00c6cbfd4e8a ("drm/i915: move pipe_mask and cpu_transcoder_mask to runtime info")
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Maarten Lankhort <maarten.lankhorst@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220916082642.3451961-1-jani.nikula@intel.com
(cherry picked from commit 86570b7b126bd516aba770d1fc4c971c55c66dca)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
For delayed BO release i915_ttm_delete_mem_notify()
gets called twice, once with proper bo->resource and
another time with NULL. We shouldn't do anything for
the 2nd time as we already cleaned up the obj once.
References: https://gitlab.freedesktop.org/drm/intel/-/issues/6850
Fixes: ad74457a6b5a96 ("drm/i915/dgfx: Release mmap on rpm suspend")
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220920170628.3391-1-nirmoy.das@intel.com
(cherry picked from commit fb7818989976317cc2e78008aa2df7b9fe423c86)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
The ipc_enabled member was supposed to be moved under the display wm
sub-struct, but due to a rebase fail only the new one was added and the
old one was left behind. Finish the job.
Fixes: 70296670f672 ("drm/i915/display: move IPC under display wm sub-struct")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220916113850.3712354-1-jani.nikula@intel.com
(cherry picked from commit 48176104003058e2ba540fd815ec46c350d65926)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
A patch was merged to remove the GuC log size override module
parameters. That patch was broken and caused kernel error messages on
boot in non CONFIG_DEBUG_GUC|GEM builds:
[ 12.085121] i915 0000:00:02.0: [drm] *ERROR* Zero GuC log crash dump size!
[ 12.092035] i915 0000:00:02.0: [drm] *ERROR* Zero GuC log debug size!
So fit it.
Fixes: f54e515c9180 ("drm/i915/guc: Remove log size module parameters")
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Julia Lawall <Julia.Lawall@inria.fr>
Cc: Chris Wilson <chris.p.wilson@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220913010929.2734885-2-John.C.Harrison@Intel.com
(cherry picked from commit 01f0ce3e859619ea84104d668a87ace924bd12df)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Now that the scratch page and page directories have a reference back to
the i915_address_space, we cannot do an immediate free of the ppgtt upon
error as those buffer objects will perform a later i915_vm_put in their
deferred frees.
The downside is that by replacing the onion unwind along the error
paths, the ppgtt cleanup must handle a partially constructed vm. This
includes ensuring that the vm->cleanup is set prior to the error path.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6900
Signed-off-by: Chris Wilson <chris.p.wilson@intel.com>
Fixes: 4d8151ae5329 ("drm/i915: Don't free shared locks while shared")
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: <stable@vger.kernel.org> # v5.14+
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220926153333.102195-1-matthew.auld@intel.com
When we submit a new pair of contexts to ELSP for execution, we start a
timer by which point we expect the HW to have switched execution to the
pending contexts. If the promotion to the new pair of contexts has not
occurred, we declare the executing context to have hung and force the
preemption to take place by resetting the engine and resubmitting the
new contexts.
This can lead to an unfair situation where almost all of the preemption
timeout is consumed by the first context which just switches into the
second context immediately prior to the timer firing and triggering the
preemption reset (assuming that the timer interrupts before we process
the CS events for the context switch). The second context hasn't yet had
a chance to yield to the incoming ELSP (and send the ACk for the
promotion) and so ends up being blamed for the reset.
If we see that a context switch has occurred since setting the
preemption timeout, but have not yet received the ACK for the ELSP
promotion, rearm the preemption timer and check again. This is
especially significant if the first context was not schedulable and so
we used the shortest timer possible, greatly increasing the chance of
accidentally blaming the second innocent context.
Fixes: 3a7a92aba8fb ("drm/i915/execlists: Force preemption")
Fixes: d12acee84ffb ("drm/i915/execlists: Cancel banned contexts on schedule-out")
Reported-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Tested-by: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: <stable@vger.kernel.org> # v5.5+
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220921135258.1714873-1-andrzej.hajda@intel.com
The inline function has no place in i915_drv.h. Move it away, un-inline,
and untangle some header dependencies while at it.
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220914163514.1837467-1-jani.nikula@intel.com
The field mode_valid in exynos_drm_crtc_ops is expected to be of type enum
drm_mode_status (*mode_valid)(struct exynos_drm_crtc *crtc,
const struct drm_display_mode *mode);
Likewise for mode_valid in drm_connector_helper_funcs.
The mismatched return type breaks forward edge kCFI since the underlying
function definition does not match the function hook definition.
The return type of mixer_mode_valid and hdmi_mode_valid should be changed
from int to enum drm_mode_status.
Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://protect2.fireeye.com/v1/url?k=3e644738-5fef521d-3e65cc77-
74fe485cbff6-36ad29bf912d3c9f&q=1&e=5cc06174-77dd-4abd-ab50-
155da5711aa3&u=https%3A%2F%2Fgithub.com%2FClangBuiltLinux%2Flinux%2Fissues%2F
1703
Cc: llvm@lists.linux.dev
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Once EDID is parsed, the monitor HDMI support information is available
through drm_display_info.is_hdmi.
This driver calls drm_detect_hdmi_monitor() to receive the same
information, which is less efficient.
Avoid calling drm_detect_hdmi_monitor() and use drm_display_info.is_hdmi
instead.
Signed-off-by: hongao <hongao@uniontech.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Wa_22015475538 applies to all DG2 (and ATSM) skus. The workaround
implementation is identical to Wa_16011620976. LSC_CHICKEN_BIT_0_UDW is
a general render register instead of rcs so adding this move to the
proper wa init function.
bspec:54077
Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220920204359.103370-1-matthew.s.atwood@intel.com
