IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Add an 85C passive trip point to ensure the thermal framework takes
sufficient action to prevent reaching junction temperature and a
110C critical point to help avoid hw damage.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240510-topic-gpus_are_cool_now-v1-4-ababc269a438@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add an 85C passive trip point to ensure the thermal framework takes
sufficient action to prevent reaching junction temperature and a
110C critical point to help avoid hw damage.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240510-topic-gpus_are_cool_now-v1-3-ababc269a438@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add an 85C passive trip point with 1C of hysteresis to ensure the
thermal framework takes sufficient action to prevent reaching junction
temperature. Also, add passive polling to ensure more than one
temperature change event is recorded.
Fixes: 014bbc990e27 ("arm64: dts: qcom: sc8280xp: Introduce additional tsens instances")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240510-topic-gpus_are_cool_now-v1-2-ababc269a438@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add an 85C passive trip point to ensure the thermal framework takes
sufficient action to prevent reaching junction temperature and a
110C critical point to help avoid hw damage.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240510-topic-gpus_are_cool_now-v1-1-ababc269a438@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
All of the thermal zone suppliers are interrupt-driven, remove the
bogus and unnecessary polling that only wastes CPU time.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Link: https://lore.kernel.org/r/20240510-topic-msm-polling-cleanup-v2-3-436ca4218da2@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
At a high-level, detachable Trogdors (sometimes known as Strongbads)
don't have a cros_ec keyboard, while all clamshell Trogdors (only known
as Trogdors) always have a cros_ec keyboard. Looking closer though, all
clamshells have a USB type-A connector and a hardwired USB camera. And
all detachables replace the USB camera with a MIPI based one and swap
the USB type-a connector for the detachable keyboard pogo pins.
Split the detachable and clamshell bits into different files so we can
describe these differences in one place instead of in each board that
includes sc7180-trogdor.dtsi. For now this is just the keyboard part,
but eventually this will include the type-a port and the pogo pins.
Cc: cros-qcom-dts-watchers@chromium.org
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: Pin-yen Lin <treapking@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240604214233.3551692-4-swboyd@chromium.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
We put a header before modifying pinctrl nodes defined in
sc7180-trogdor.dtsi in every other file. Add one here so we know that
this section is for pinctrl modifications.
Cc: cros-qcom-dts-watchers@chromium.org
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20240604214233.3551692-3-swboyd@chromium.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
It's simpler to reason about things if we disable nodes instead of
deleting them. Disable the second usb type-c connector node on
quackingstick instead of deleting it so that we can reason about ports
more easily.
Cc: cros-qcom-dts-watchers@chromium.org
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20240604214233.3551692-2-swboyd@chromium.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Interrupt flags 0x2008 looks like some downstream copy-paste, because
generic GPIOLIB code, used by Qualcomm pin controller drivers, ignores
flags outside of IRQ_TYPE_SENSE_MASK. Probably the intention was to
pass just 0x8, so IRQ_TYPE_LEVEL_LOW.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Konrad Dybcio <konrad.dybcio@linaro.org> # SM8450 PDX223
Link: https://lore.kernel.org/r/20240605160032.150587-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Interrupt flags 0x2008 looks like some downstream copy-paste, because
generic GPIOLIB code, used by Qualcomm pin controller drivers, ignores
flags outside of IRQ_TYPE_SENSE_MASK. Probably the intention was to
pass just 0x8, so IRQ_TYPE_LEVEL_LOW.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240605160032.150587-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Interrupt flags 0x2008 looks like some downstream copy-paste, because
generic GPIOLIB code, used by Qualcomm pin controller drivers, ignores
flags outside of IRQ_TYPE_SENSE_MASK. Probably the intention was to
pass just 0x8, so IRQ_TYPE_LEVEL_LOW.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240605160032.150587-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Interrupt flags 0x2008 looks like some downstream copy-paste, because
generic GPIOLIB code, used by Qualcomm pin controller drivers, ignores
flags outside of IRQ_TYPE_SENSE_MASK. Probably the intention was to
pass just 0x8, so IRQ_TYPE_LEVEL_LOW.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240605160032.150587-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the pmic-glink node and describe all 3 USB Type-C connectors. Do this
for USB only, for now. The DP ports will come at a later stage since
they use muxes.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240606-x1e80100-dts-pmic-glink-v2-3-972c902e3e6b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the pmic-glink node and describe all 3 USB Type-C connectors. Do this
for USB only, for now. The DP ports will come at a later stage since
they use retimers.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240606-x1e80100-dts-pmic-glink-v2-2-972c902e3e6b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Describe the port/endpoints graph between the USB/DP combo PHYs and their
corresponding DP controllers.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240606-x1e80100-dts-pmic-glink-v2-1-972c902e3e6b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Merge the arm64-fixes-for-6.10 branch into arm64-for-6.11 to resolve the
merge conflict caused by pmic-glink and reserved-memory introduction at
the same place in the x1e80100 crd and qcp dts files.
With the SM8650-HDK, a Display Card kit can be connected to provide
a VTDR6130 display with Goodix Berlin Touch controller.
In order to route the DSI lanes to the connector for the Display
Card kit, a switch must be changed on the board.
The HDMI nodes are disabled since the DSI lanes are shared with
the DSI to HDMI transceiver.
Add support for this card as an overlay and apply it it at
build-time to the sm8650-hdk dtb.
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Tested-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240606-topic-sm8650-upstream-hdk-v6-1-fb034fe864cc@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add charger to PM660 PMIC. Readings from round-robin ADC
are needed for charger to function, so add it as well.
Signed-off-by: Aboothahir U <aboothahirpkd@gmail.com>
Signed-off-by: Barnabás Czémán <trabarni@gmail.com>
Link: https://lore.kernel.org/r/20240606-pm660-charger-rrdac-v1-1-a95d4da24f3b@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The actual size of the DBI region is 0xf20 and the start of the
ELBI region is 0xf40, according to the documentation. So fix them.
While at it, add the MHI region as well.
Fixes: 5eb83fc10289 ("arm64: dts: qcom: x1e80100: Add PCIe nodes")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20240604-x1e80100-dts-fixes-pcie6a-v2-1-0b4d8c6256e5@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The phones listed below have Richtek RT5033 PMIC and charger.
Add them to the device trees.
- Samsung Galaxy Core Prime LTE
- Samsung Galaxy Grand Prime
Cc: Jakob Hauser <jahau@rocketmail.com>
Signed-off-by: Raymond Hackley <raymondhackley@protonmail.com>
Link: https://lore.kernel.org/r/20240601115321.25314-4-raymondhackley@protonmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
