IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
We need 6.7-rc4 in here as we need to revert one of the debugfs changes
that came in that release through the wireless tree.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Current release - regressions:
- neighbour: fix __randomize_layout crash in struct neighbour
- r8169: fix deadlock on RTL8125 in jumbo mtu mode
Previous releases - regressions:
- wifi:
- mac80211: fix warning at station removal time
- cfg80211: fix CQM for non-range use
- tools: ynl-gen: fix unexpected response handling
- octeontx2-af: fix possible buffer overflow
- dpaa2: recycle the RX buffer only after all processing done
- rswitch: fix missing dev_kfree_skb_any() in error path
Previous releases - always broken:
- ipv4: fix uaf issue when receiving igmp query packet
- wifi: mac80211: fix debugfs deadlock at device removal time
- bpf:
- sockmap: af_unix stream sockets need to hold ref for pair sock
- netdevsim: don't accept device bound programs
- selftests: fix a char signedness issue
- dsa: mv88e6xxx: fix marvell 6350 probe crash
- octeontx2-pf: restore TC ingress police rules when interface is up
- wangxun: fix memory leak on msix entry
- ravb: keep reverse order of operations in ravb_remove()
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=QiQp
-----END PGP SIGNATURE-----
Merge tag 'net-6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bpf and wifi.
Current release - regressions:
- neighbour: fix __randomize_layout crash in struct neighbour
- r8169: fix deadlock on RTL8125 in jumbo mtu mode
Previous releases - regressions:
- wifi:
- mac80211: fix warning at station removal time
- cfg80211: fix CQM for non-range use
- tools: ynl-gen: fix unexpected response handling
- octeontx2-af: fix possible buffer overflow
- dpaa2: recycle the RX buffer only after all processing done
- rswitch: fix missing dev_kfree_skb_any() in error path
Previous releases - always broken:
- ipv4: fix uaf issue when receiving igmp query packet
- wifi: mac80211: fix debugfs deadlock at device removal time
- bpf:
- sockmap: af_unix stream sockets need to hold ref for pair sock
- netdevsim: don't accept device bound programs
- selftests: fix a char signedness issue
- dsa: mv88e6xxx: fix marvell 6350 probe crash
- octeontx2-pf: restore TC ingress police rules when interface is up
- wangxun: fix memory leak on msix entry
- ravb: keep reverse order of operations in ravb_remove()"
* tag 'net-6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (51 commits)
net: ravb: Keep reverse order of operations in ravb_remove()
net: ravb: Stop DMA in case of failures on ravb_open()
net: ravb: Start TX queues after HW initialization succeeded
net: ravb: Make write access to CXR35 first before accessing other EMAC registers
net: ravb: Use pm_runtime_resume_and_get()
net: ravb: Check return value of reset_control_deassert()
net: libwx: fix memory leak on msix entry
ice: Fix VF Reset paths when interface in a failed over aggregate
bpf, sockmap: Add af_unix test with both sockets in map
bpf, sockmap: af_unix stream sockets need to hold ref for pair sock
tools: ynl-gen: always construct struct ynl_req_state
ethtool: don't propagate EOPNOTSUPP from dumps
ravb: Fix races between ravb_tx_timeout_work() and net related ops
r8169: prevent potential deadlock in rtl8169_close
r8169: fix deadlock on RTL8125 in jumbo mtu mode
neighbour: Fix __randomize_layout crash in struct neighbour
octeontx2-pf: Restore TC ingress police rules when interface is up
octeontx2-pf: Fix adding mbox work queue entry when num_vfs > 64
net: stmmac: xgmac: Disable FPE MMC interrupts
octeontx2-af: Fix possible buffer overflow
...
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZWfJyQAKCRDbK58LschI
g+AOAQCJhC0Tt+2db4H+xQVNaYiLouI7DZPOhNivvACmCyxoiwEA3EOeDmIYd5E3
BI702APCZ76pxt6Zg0bkcg9d7kLDaQk=
=zmzL
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2023-11-30
We've added 5 non-merge commits during the last 7 day(s) which contain
a total of 10 files changed, 66 insertions(+), 15 deletions(-).
The main changes are:
1) Fix AF_UNIX splat from use after free in BPF sockmap,
from John Fastabend.
2) Fix a syzkaller splat in netdevsim by properly handling offloaded
programs (and not device-bound ones), from Stanislav Fomichev.
3) Fix bpf_mem_cache_alloc_flags() to initialize the allocation hint,
from Hou Tao.
4) Fix netkit by rejecting IFLA_NETKIT_PEER_INFO in changelink,
from Daniel Borkmann.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf, sockmap: Add af_unix test with both sockets in map
bpf, sockmap: af_unix stream sockets need to hold ref for pair sock
netkit: Reject IFLA_NETKIT_PEER_INFO in netkit_change_link
bpf: Add missed allocation hint for bpf_mem_cache_alloc_flags()
netdevsim: Don't accept device bound programs
====================
Link: https://lore.kernel.org/r/20231129234916.16128-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This adds a test where both pairs of a af_unix paired socket are put into a
BPF map. This ensures that when we tear down the af_unix pair we don't have
any issues on sockmap side with ordering and reference counting.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20231129012557.95371-3-john.fastabend@gmail.com
struct ynl_req_state carries reply-related info from generated code
into generic YNL code. While we don't need reply info to execute
a request without a reply, we still need to pass in the struct, because
it's also where we get the pointer to struct ynl_sock from. Passing NULL
results in crashes if kernel returns an error or an unexpected reply.
Fixes: dc0956c98f ("tools: ynl-gen: move the response reading logic into YNL")
Link: https://lore.kernel.org/r/20231126225858.2144136-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Same init_rng() in both tests. The function reads /dev/urandom to
initialize srand(). In case of failure, it falls back onto the
entropy in the uninitialized variable. Not sure if this is on purpose.
But failure reading urandom should be rare, so just fail hard. While
at it, convert to getrandom(). Which man 4 random suggests is simpler
and more robust.
mptcp_inq.c:525:6:
mptcp_connect.c:1131:6:
error: variable 'foo' is used uninitialized
whenever 'if' condition is false
[-Werror,-Wsometimes-uninitialized]
Fixes: 048d19d444 ("mptcp: add basic kselftest for mptcp")
Fixes: b51880568f ("selftests: mptcp: add inq test case")
Cc: Florian Westphal <fw@strlen.de>
Signed-off-by: Willem de Bruijn <willemb@google.com>
----
When input is randomized because this is expected to meaningfully
explore edge cases, should we also add
1. logging the random seed to stdout and
2. adding a command line argument to replay from a specific seed
I can do this in net-next, if authors find it useful in this case.
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20231124171645.1011043-5-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signedness of char is signed on x86_64, but unsigned on arm64.
Fix the warning building cmsg_sender.c on signed platforms or
forced with -fsigned-char:
msg_sender.c:455:12:
error: implicit conversion from 'int' to 'char'
changes value from 128 to -128
[-Werror,-Wconstant-conversion]
buf[0] = ICMPV6_ECHO_REQUEST;
constant ICMPV6_ECHO_REQUEST is 128.
Link: https://lwn.net/Articles/911914
Fixes: de17e305a8 ("selftests: net: cmsg_sender: support icmp and raw sockets")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20231124171645.1011043-3-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix a small compiler warning.
nr_process must be a signed long: it is assigned a signed long by
strtol() and is compared against LONG_MIN and LONG_MAX.
ipsec.c:2280:65:
error: result of comparison of constant -9223372036854775808
with expression of type 'unsigned int' is always false
[-Werror,-Wtautological-constant-out-of-range-compare]
if ((errno == ERANGE && (nr_process == LONG_MAX || nr_process == LONG_MIN))
Fixes: bc2652b7ae ("selftest/net/xfrm: Add test for ipsec tunnel")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://lore.kernel.org/r/20231124171645.1011043-2-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Drop HP-UX ENOSYM and EREMOTERELEASE return codes to avoid glibc
build issues
- Fix section alignments for ex_table, altinstructions, parisc unwind
table, jump_table and bug_table
- Reduce size of bug_table on 64-bit kernel by using relative
pointers
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZWNy+gAKCRD3ErUQojoP
XwmuAQDw3a424GmG9c4lxQgPCdtFMUeOCOpMpPNNWdT8UhAcngD9FL5++lt1mwhK
mq+w+ftx9sATtUIbvX5exkD1dChRaQw=
=+Q66
-----END PGP SIGNATURE-----
Merge tag 'parisc-for-6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture fixes from Helge Deller:
"This patchset fixes and enforces correct section alignments for the
ex_table, altinstructions, parisc_unwind, jump_table and bug_table
which are created by inline assembly.
Due to not being correctly aligned at link & load time they can
trigger unnecessarily the kernel unaligned exception handler at
runtime. While at it, I switched the bug table to use relative
addresses which reduces the size of the table by half on 64-bit.
We still had the ENOSYM and EREMOTERELEASE errno symbols as left-overs
from HP-UX, which now trigger build-issues with glibc. We can simply
remove them.
Most of the patches are tagged for stable kernel series.
Summary:
- Drop HP-UX ENOSYM and EREMOTERELEASE return codes to avoid glibc
build issues
- Fix section alignments for ex_table, altinstructions, parisc unwind
table, jump_table and bug_table
- Reduce size of bug_table on 64-bit kernel by using relative
pointers"
* tag 'parisc-for-6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Reduce size of the bug_table on 64-bit kernel by half
parisc: Drop the HP-UX ENOSYM and EREMOTERELEASE error codes
parisc: Use natural CPU alignment for bug_table
parisc: Ensure 32-bit alignment on parisc unwind section
parisc: Mark lock_aligned variables 16-byte aligned on SMP
parisc: Mark jump_table naturally aligned
parisc: Mark altinstructions read-only and 32-bit aligned
parisc: Mark ex_table entries 32-bit aligned in uaccess.h
parisc: Mark ex_table entries 32-bit aligned in assembly.h
- Fix "rodata=on" not disabling "rodata=full" on arm64
- Add arm64 make dependency between vmlinuz.efi and Image, leading to
occasional build failures previously (with parallel building)
- Add newline to the output formatting of the za-fork kselftest
-----BEGIN PGP SIGNATURE-----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=shHM
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Fix "rodata=on" not disabling "rodata=full" on arm64
- Add arm64 make dependency between vmlinuz.efi and Image, leading to
occasional build failures previously (with parallel building)
- Add newline to the output formatting of the za-fork kselftest
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: add dependency between vmlinuz.efi and Image
kselftest/arm64: Fix output formatting for za-fork
arm64: mm: Fix "rodata=on" when CONFIG_RODATA_FULL_DEFAULT_ENABLED=y
Those return codes are only defined for the parisc architecture and
are leftovers from when we wanted to be HP-UX compatible.
They are not returned by any Linux kernel syscall but do trigger
problems with the glibc strerrorname_np() and strerror() functions as
reported in glibc issue #31080.
There is no need to keep them, so simply remove them.
Signed-off-by: Helge Deller <deller@gmx.de>
Reported-by: Bruno Haible <bruno@clisp.org>
Closes: https://sourceware.org/bugzilla/show_bug.cgi?id=31080
Cc: stable@vger.kernel.org
Fix a syntax error in the sleepgraph utility which causes it to
exit early on every invocation (David Woodhouse).
-----BEGIN PGP SIGNATURE-----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=ZRip
-----END PGP SIGNATURE-----
Merge tag 'pm-6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Fix a syntax error in the sleepgraph utility which causes it to exit
early on every invocation (David Woodhouse)"
* tag 'pm-6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: tools: Fix sleepgraph syntax error
Current release - regressions:
- Revert "net: r8169: Disable multicast filter for RTL8168H
and RTL8107E"
- kselftest: rtnetlink: fix ip route command typo
Current release - new code bugs:
- s390/ism: make sure ism driver implies smc protocol in kconfig
- two build fixes for tools/net
Previous releases - regressions:
- rxrpc: couple of ACK/PING/RTT handling fixes
Previous releases - always broken:
- bpf: verify bpf_loop() callbacks as if they are called unknown
number of times
- improve stability of auto-bonding with Hyper-V
- account BPF-neigh-redirected traffic in interface statistics
Misc:
- net: fill in some more MODULE_DESCRIPTION()s
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=2sG4
-----END PGP SIGNATURE-----
Merge tag 'net-6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf.
Current release - regressions:
- Revert "net: r8169: Disable multicast filter for RTL8168H and
RTL8107E"
- kselftest: rtnetlink: fix ip route command typo
Current release - new code bugs:
- s390/ism: make sure ism driver implies smc protocol in kconfig
- two build fixes for tools/net
Previous releases - regressions:
- rxrpc: couple of ACK/PING/RTT handling fixes
Previous releases - always broken:
- bpf: verify bpf_loop() callbacks as if they are called unknown
number of times
- improve stability of auto-bonding with Hyper-V
- account BPF-neigh-redirected traffic in interface statistics
Misc:
- net: fill in some more MODULE_DESCRIPTION()s"
* tag 'net-6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (58 commits)
tools: ynl: fix duplicate op name in devlink
tools: ynl: fix header path for nfsd
net: ipa: fix one GSI register field width
tls: fix NULL deref on tls_sw_splice_eof() with empty record
net: axienet: Fix check for partial TX checksum
vsock/test: fix SEQPACKET message bounds test
i40e: Fix adding unsupported cloud filters
ice: restore timestamp configuration after device reset
ice: unify logic for programming PFINT_TSYN_MSK
ice: remove ptp_tx ring parameter flag
amd-xgbe: propagate the correct speed and duplex status
amd-xgbe: handle the corner-case during tx completion
amd-xgbe: handle corner-case during sfp hotplug
net: veth: fix ethtool stats reporting
octeontx2-pf: Fix ntuple rule creation to direct packet to VF with higher Rx queue than its PF
net: usb: qmi_wwan: claim interface 4 for ZTE MF290
Revert "net: r8169: Disable multicast filter for RTL8168H and RTL8107E"
net/smc: avoid data corruption caused by decline
nfc: virtual_ncidev: Add variable to check if ndev is running
dpll: Fix potential msg memleak when genlmsg_put_reply failed
...
We don't support CRUD-inspired message types in YNL too well.
One aspect that currently trips us up is the fact that single
message ID can be used in multiple commands (as the response).
This leads to duplicate entries in the id-to-string tables:
devlink-user.c:19:34: warning: initialized field overwritten [-Woverride-init]
19 | [DEVLINK_CMD_PORT_NEW] = "port-new",
| ^~~~~~~~~~
devlink-user.c:19:34: note: (near initialization for ‘devlink_op_strmap[7]’)
Fixes tag points at where the code was generated, the "real" problem
is that the code generator does not support CRUD.
Fixes: f2f9dd164d ("netlink: specs: devlink: add the remaining command to generate complete split_ops")
Link: https://lore.kernel.org/r/20231123030558.1611831-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The makefile dependency is trying to include the wrong header:
<command-line>: fatal error: ../../../../include/uapi//linux/nfsd.h: No such file or directory
The guard also looks wrong.
Fixes: f14122b2c2 ("tools: ynl: Add source files for nfsd netlink protocol")
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/20231123030624.1611925-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tune message length calculation to make this test work on machines
where 'getpagesize()' returns >32KB. Now maximum message length is not
hardcoded (on machines above it was smaller than 'getpagesize()' return
value, thus we get negative value and test fails), but calculated at
runtime and always bigger than 'getpagesize()' result. Reproduced on
aarch64 with 64KB page size.
Fixes: 5c338112e4 ("test/vsock: rework message bounds test")
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reported-by: Bogdan Marcynkov <bmarcynk@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20231121211642.163474-1-avkrasnov@salutedevices.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The za-fork test does not output a newline when reporting the result of
the one test it runs, causing the counts printed by kselftest to be
included in the test name. Add the newline.
Fixes: 266679ffd8 ("kselftest/arm64: Convert za-fork to use kselftest.h")
Cc: <stable@vger.kernel.org> # 6.4.x
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20231116-arm64-fix-za-fork-output-v1-1-42c03d4f5759@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Currently the sysreg-defs are written out to the source tree
unconditionally, ignoring the specified output directory. Correct the
build rule to emit the header to the output directory. Opportunistically
reorganize the rules to avoid interleaving with the set of beauty make
rules.
Reported-by: Ian Rogers <irogers@google.com>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20231121192956.919380-3-oliver.upton@linux.dev
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Ian pointed out that source tarballs are incomplete as of commit
e2bdd172e6 ("perf build: Generate arm64's sysreg-defs.h and add to
include path"), since the source files needed from the kernel tree do
not appear in the manifest. Add them.
Reported-by: Ian Rogers <irogers@google.com>
Fixes: e2bdd172e6 ("perf build: Generate arm64's sysreg-defs.h and add to include path")
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20231121192956.919380-2-oliver.upton@linux.dev
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
tldr; Just FYI, I'm carrying this on the perf tools tree.
Full explanation:
There used to be no copies, with tools/ code using kernel headers
directly. From time to time tools/perf/ broke due to legitimate kernel
hacking. At some point Linus complained about such direct usage. Then we
adopted the current model.
The way these headers are used in perf are not restricted to just
including them to compile something.
There are sometimes used in scripts that convert defines into string
tables, etc, so some change may break one of these scripts, or new MSRs
may use some different #define pattern, etc.
E.g.:
$ ls -1 tools/perf/trace/beauty/*.sh | head -5
tools/perf/trace/beauty/arch_errno_names.sh
tools/perf/trace/beauty/drm_ioctl.sh
tools/perf/trace/beauty/fadvise.sh
tools/perf/trace/beauty/fsconfig.sh
tools/perf/trace/beauty/fsmount.sh
$
$ tools/perf/trace/beauty/fadvise.sh
static const char *fadvise_advices[] = {
[0] = "NORMAL",
[1] = "RANDOM",
[2] = "SEQUENTIAL",
[3] = "WILLNEED",
[4] = "DONTNEED",
[5] = "NOREUSE",
};
$
The tools/perf/check-headers.sh script, part of the tools/ build
process, points out changes in the original files.
So its important not to touch the copies in tools/ when doing changes in
the original kernel headers, that will be done later, when
check-headers.sh inform about the change to the perf tools hackers.
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: linux-mips@vger.kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20231121225650.390246-14-namhyung@kernel.org
tldr; Just FYI, I'm carrying this on the perf tools tree.
Full explanation:
There used to be no copies, with tools/ code using kernel headers
directly. From time to time tools/perf/ broke due to legitimate kernel
hacking. At some point Linus complained about such direct usage. Then we
adopted the current model.
The way these headers are used in perf are not restricted to just
including them to compile something.
There are sometimes used in scripts that convert defines into string
tables, etc, so some change may break one of these scripts, or new MSRs
may use some different #define pattern, etc.
E.g.:
$ ls -1 tools/perf/trace/beauty/*.sh | head -5
tools/perf/trace/beauty/arch_errno_names.sh
tools/perf/trace/beauty/drm_ioctl.sh
tools/perf/trace/beauty/fadvise.sh
tools/perf/trace/beauty/fsconfig.sh
tools/perf/trace/beauty/fsmount.sh
$
$ tools/perf/trace/beauty/fadvise.sh
static const char *fadvise_advices[] = {
[0] = "NORMAL",
[1] = "RANDOM",
[2] = "SEQUENTIAL",
[3] = "WILLNEED",
[4] = "DONTNEED",
[5] = "NOREUSE",
};
$
The tools/perf/check-headers.sh script, part of the tools/ build
process, points out changes in the original files.
So its important not to touch the copies in tools/ when doing changes in
the original kernel headers, that will be done later, when
check-headers.sh inform about the change to the perf tools hackers.
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: linux-s390@vger.kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20231121225650.390246-13-namhyung@kernel.org
tldr; Just FYI, I'm carrying this on the perf tools tree.
Full explanation:
There used to be no copies, with tools/ code using kernel headers
directly. From time to time tools/perf/ broke due to legitimate kernel
hacking. At some point Linus complained about such direct usage. Then we
adopted the current model.
The way these headers are used in perf are not restricted to just
including them to compile something.
There are sometimes used in scripts that convert defines into string
tables, etc, so some change may break one of these scripts, or new MSRs
may use some different #define pattern, etc.
E.g.:
$ ls -1 tools/perf/trace/beauty/*.sh | head -5
tools/perf/trace/beauty/arch_errno_names.sh
tools/perf/trace/beauty/drm_ioctl.sh
tools/perf/trace/beauty/fadvise.sh
tools/perf/trace/beauty/fsconfig.sh
tools/perf/trace/beauty/fsmount.sh
$
$ tools/perf/trace/beauty/fadvise.sh
static const char *fadvise_advices[] = {
[0] = "NORMAL",
[1] = "RANDOM",
[2] = "SEQUENTIAL",
[3] = "WILLNEED",
[4] = "DONTNEED",
[5] = "NOREUSE",
};
$
The tools/perf/check-headers.sh script, part of the tools/ build
process, points out changes in the original files.
So its important not to touch the copies in tools/ when doing changes in
the original kernel headers, that will be done later, when
check-headers.sh inform about the change to the perf tools hackers.
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20231121225650.390246-12-namhyung@kernel.org
tldr; Just FYI, I'm carrying this on the perf tools tree.
Full explanation:
There used to be no copies, with tools/ code using kernel headers
directly. From time to time tools/perf/ broke due to legitimate kernel
hacking. At some point Linus complained about such direct usage. Then we
adopted the current model.
The way these headers are used in perf are not restricted to just
including them to compile something.
There are sometimes used in scripts that convert defines into string
tables, etc, so some change may break one of these scripts, or new MSRs
may use some different #define pattern, etc.
E.g.:
$ ls -1 tools/perf/trace/beauty/*.sh | head -5
tools/perf/trace/beauty/arch_errno_names.sh
tools/perf/trace/beauty/drm_ioctl.sh
tools/perf/trace/beauty/fadvise.sh
tools/perf/trace/beauty/fsconfig.sh
tools/perf/trace/beauty/fsmount.sh
$
$ tools/perf/trace/beauty/fadvise.sh
static const char *fadvise_advices[] = {
[0] = "NORMAL",
[1] = "RANDOM",
[2] = "SEQUENTIAL",
[3] = "WILLNEED",
[4] = "DONTNEED",
[5] = "NOREUSE",
};
$
The tools/perf/check-headers.sh script, part of the tools/ build
process, points out changes in the original files.
So its important not to touch the copies in tools/ when doing changes in
the original kernel headers, that will be done later, when
check-headers.sh inform about the change to the perf tools hackers.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: x86@kernel.org
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20231121225650.390246-11-namhyung@kernel.org
tldr; Just FYI, I'm carrying this on the perf tools tree.
Full explanation:
There used to be no copies, with tools/ code using kernel headers
directly. From time to time tools/perf/ broke due to legitimate kernel
hacking. At some point Linus complained about such direct usage. Then we
adopted the current model.
The way these headers are used in perf are not restricted to just
including them to compile something.
There are sometimes used in scripts that convert defines into string
tables, etc, so some change may break one of these scripts, or new MSRs
may use some different #define pattern, etc.
E.g.:
$ ls -1 tools/perf/trace/beauty/*.sh | head -5
tools/perf/trace/beauty/arch_errno_names.sh
tools/perf/trace/beauty/drm_ioctl.sh
tools/perf/trace/beauty/fadvise.sh
tools/perf/trace/beauty/fsconfig.sh
tools/perf/trace/beauty/fsmount.sh
$
$ tools/perf/trace/beauty/fadvise.sh
static const char *fadvise_advices[] = {
[0] = "NORMAL",
[1] = "RANDOM",
[2] = "SEQUENTIAL",
[3] = "WILLNEED",
[4] = "DONTNEED",
[5] = "NOREUSE",
};
$
The tools/perf/check-headers.sh script, part of the tools/ build
process, points out changes in the original files.
So its important not to touch the copies in tools/ when doing changes in
the original kernel headers, that will be done later, when
check-headers.sh inform about the change to the perf tools hackers.
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: linux-s390@vger.kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20231121225650.390246-10-namhyung@kernel.org
tldr; Just FYI, I'm carrying this on the perf tools tree.
Full explanation:
There used to be no copies, with tools/ code using kernel headers
directly. From time to time tools/perf/ broke due to legitimate kernel
hacking. At some point Linus complained about such direct usage. Then we
adopted the current model.
The way these headers are used in perf are not restricted to just
including them to compile something.
There are sometimes used in scripts that convert defines into string
tables, etc, so some change may break one of these scripts, or new MSRs
may use some different #define pattern, etc.
E.g.:
$ ls -1 tools/perf/trace/beauty/*.sh | head -5
tools/perf/trace/beauty/arch_errno_names.sh
tools/perf/trace/beauty/drm_ioctl.sh
tools/perf/trace/beauty/fadvise.sh
tools/perf/trace/beauty/fsconfig.sh
tools/perf/trace/beauty/fsmount.sh
$
$ tools/perf/trace/beauty/fadvise.sh
static const char *fadvise_advices[] = {
[0] = "NORMAL",
[1] = "RANDOM",
[2] = "SEQUENTIAL",
[3] = "WILLNEED",
[4] = "DONTNEED",
[5] = "NOREUSE",
};
$
The tools/perf/check-headers.sh script, part of the tools/ build
process, points out changes in the original files.
So its important not to touch the copies in tools/ when doing changes in
the original kernel headers, that will be done later, when
check-headers.sh inform about the change to the perf tools hackers.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20231121225650.390246-9-namhyung@kernel.org
tldr; Just FYI, I'm carrying this on the perf tools tree.
Full explanation:
There used to be no copies, with tools/ code using kernel headers
directly. From time to time tools/perf/ broke due to legitimate kernel
hacking. At some point Linus complained about such direct usage. Then we
adopted the current model.
The way these headers are used in perf are not restricted to just
including them to compile something.
There are sometimes used in scripts that convert defines into string
tables, etc, so some change may break one of these scripts, or new MSRs
may use some different #define pattern, etc.
E.g.:
$ ls -1 tools/perf/trace/beauty/*.sh | head -5
tools/perf/trace/beauty/arch_errno_names.sh
tools/perf/trace/beauty/drm_ioctl.sh
tools/perf/trace/beauty/fadvise.sh
tools/perf/trace/beauty/fsconfig.sh
tools/perf/trace/beauty/fsmount.sh
$
$ tools/perf/trace/beauty/fadvise.sh
static const char *fadvise_advices[] = {
[0] = "NORMAL",
[1] = "RANDOM",
[2] = "SEQUENTIAL",
[3] = "WILLNEED",
[4] = "DONTNEED",
[5] = "NOREUSE",
};
$
The tools/perf/check-headers.sh script, part of the tools/ build
process, points out changes in the original files.
So its important not to touch the copies in tools/ when doing changes in
the original kernel headers, that will be done later, when
check-headers.sh inform about the change to the perf tools hackers.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: x86@kernel.org
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20231121225650.390246-8-namhyung@kernel.org
tldr; Just FYI, I'm carrying this on the perf tools tree.
Full explanation:
There used to be no copies, with tools/ code using kernel headers
directly. From time to time tools/perf/ broke due to legitimate kernel
hacking. At some point Linus complained about such direct usage. Then we
adopted the current model.
The way these headers are used in perf are not restricted to just
including them to compile something.
There are sometimes used in scripts that convert defines into string
tables, etc, so some change may break one of these scripts, or new MSRs
may use some different #define pattern, etc.
E.g.:
$ ls -1 tools/perf/trace/beauty/*.sh | head -5
tools/perf/trace/beauty/arch_errno_names.sh
tools/perf/trace/beauty/drm_ioctl.sh
tools/perf/trace/beauty/fadvise.sh
tools/perf/trace/beauty/fsconfig.sh
tools/perf/trace/beauty/fsmount.sh
$
$ tools/perf/trace/beauty/fadvise.sh
static const char *fadvise_advices[] = {
[0] = "NORMAL",
[1] = "RANDOM",
[2] = "SEQUENTIAL",
[3] = "WILLNEED",
[4] = "DONTNEED",
[5] = "NOREUSE",
};
$
The tools/perf/check-headers.sh script, part of the tools/ build
process, points out changes in the original files.
So its important not to touch the copies in tools/ when doing changes in
the original kernel headers, that will be done later, when
check-headers.sh inform about the change to the perf tools hackers.
Cc: netdev@vger.kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20231121225650.390246-7-namhyung@kernel.org
tldr; Just FYI, I'm carrying this on the perf tools tree.
Full explanation:
There used to be no copies, with tools/ code using kernel headers
directly. From time to time tools/perf/ broke due to legitimate kernel
hacking. At some point Linus complained about such direct usage. Then we
adopted the current model.
The way these headers are used in perf are not restricted to just
including them to compile something.
There are sometimes used in scripts that convert defines into string
tables, etc, so some change may break one of these scripts, or new MSRs
may use some different #define pattern, etc.
E.g.:
$ ls -1 tools/perf/trace/beauty/*.sh | head -5
tools/perf/trace/beauty/arch_errno_names.sh
tools/perf/trace/beauty/drm_ioctl.sh
tools/perf/trace/beauty/fadvise.sh
tools/perf/trace/beauty/fsconfig.sh
tools/perf/trace/beauty/fsmount.sh
$
$ tools/perf/trace/beauty/fadvise.sh
static const char *fadvise_advices[] = {
[0] = "NORMAL",
[1] = "RANDOM",
[2] = "SEQUENTIAL",
[3] = "WILLNEED",
[4] = "DONTNEED",
[5] = "NOREUSE",
};
$
The tools/perf/check-headers.sh script, part of the tools/ build
process, points out changes in the original files.
So its important not to touch the copies in tools/ when doing changes in
the original kernel headers, that will be done later, when
check-headers.sh inform about the change to the perf tools hackers.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linux-arch@vger.kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20231121225650.390246-6-namhyung@kernel.org
tldr; Just FYI, I'm carrying this on the perf tools tree.
Full explanation:
There used to be no copies, with tools/ code using kernel headers
directly. From time to time tools/perf/ broke due to legitimate kernel
hacking. At some point Linus complained about such direct usage. Then we
adopted the current model.
The way these headers are used in perf are not restricted to just
including them to compile something.
There are sometimes used in scripts that convert defines into string
tables, etc, so some change may break one of these scripts, or new MSRs
may use some different #define pattern, etc.
E.g.:
$ ls -1 tools/perf/trace/beauty/*.sh | head -5
tools/perf/trace/beauty/arch_errno_names.sh
tools/perf/trace/beauty/drm_ioctl.sh
tools/perf/trace/beauty/fadvise.sh
tools/perf/trace/beauty/fsconfig.sh
tools/perf/trace/beauty/fsmount.sh
$
$ tools/perf/trace/beauty/fadvise.sh
static const char *fadvise_advices[] = {
[0] = "NORMAL",
[1] = "RANDOM",
[2] = "SEQUENTIAL",
[3] = "WILLNEED",
[4] = "DONTNEED",
[5] = "NOREUSE",
};
$
The tools/perf/check-headers.sh script, part of the tools/ build
process, points out changes in the original files.
So its important not to touch the copies in tools/ when doing changes in
the original kernel headers, that will be done later, when
check-headers.sh inform about the change to the perf tools hackers.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: kvm@vger.kernel.org
Cc: virtualization@lists.linux.dev
Cc: netdev@vger.kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20231121225650.390246-5-namhyung@kernel.org
tldr; Just FYI, I'm carrying this on the perf tools tree.
Full explanation:
There used to be no copies, with tools/ code using kernel headers
directly. From time to time tools/perf/ broke due to legitimate kernel
hacking. At some point Linus complained about such direct usage. Then we
adopted the current model.
The way these headers are used in perf are not restricted to just
including them to compile something.
There are sometimes used in scripts that convert defines into string
tables, etc, so some change may break one of these scripts, or new MSRs
may use some different #define pattern, etc.
E.g.:
$ ls -1 tools/perf/trace/beauty/*.sh | head -5
tools/perf/trace/beauty/arch_errno_names.sh
tools/perf/trace/beauty/drm_ioctl.sh
tools/perf/trace/beauty/fadvise.sh
tools/perf/trace/beauty/fsconfig.sh
tools/perf/trace/beauty/fsmount.sh
$
$ tools/perf/trace/beauty/fadvise.sh
static const char *fadvise_advices[] = {
[0] = "NORMAL",
[1] = "RANDOM",
[2] = "SEQUENTIAL",
[3] = "WILLNEED",
[4] = "DONTNEED",
[5] = "NOREUSE",
};
$
The tools/perf/check-headers.sh script, part of the tools/ build
process, points out changes in the original files.
So its important not to touch the copies in tools/ when doing changes in
the original kernel headers, that will be done later, when
check-headers.sh inform about the change to the perf tools hackers.
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20231121225650.390246-4-namhyung@kernel.org
tldr; Just FYI, I'm carrying this on the perf tools tree.
Full explanation:
There used to be no copies, with tools/ code using kernel headers
directly. From time to time tools/perf/ broke due to legitimate kernel
hacking. At some point Linus complained about such direct usage. Then we
adopted the current model.
The way these headers are used in perf are not restricted to just
including them to compile something.
There are sometimes used in scripts that convert defines into string
tables, etc, so some change may break one of these scripts, or new MSRs
may use some different #define pattern, etc.
E.g.:
$ ls -1 tools/perf/trace/beauty/*.sh | head -5
tools/perf/trace/beauty/arch_errno_names.sh
tools/perf/trace/beauty/drm_ioctl.sh
tools/perf/trace/beauty/fadvise.sh
tools/perf/trace/beauty/fsconfig.sh
tools/perf/trace/beauty/fsmount.sh
$
$ tools/perf/trace/beauty/fadvise.sh
static const char *fadvise_advices[] = {
[0] = "NORMAL",
[1] = "RANDOM",
[2] = "SEQUENTIAL",
[3] = "WILLNEED",
[4] = "DONTNEED",
[5] = "NOREUSE",
};
$
The tools/perf/check-headers.sh script, part of the tools/ build
process, points out changes in the original files.
So its important not to touch the copies in tools/ when doing changes in
the original kernel headers, that will be done later, when
check-headers.sh inform about the change to the perf tools hackers.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: kvm@vger.kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20231121225650.390246-3-namhyung@kernel.org
tldr; Just FYI, I'm carrying this on the perf tools tree.
Full explanation:
There used to be no copies, with tools/ code using kernel headers
directly. From time to time tools/perf/ broke due to legitimate kernel
hacking. At some point Linus complained about such direct usage. Then we
adopted the current model.
The way these headers are used in perf are not restricted to just
including them to compile something.
There are sometimes used in scripts that convert defines into string
tables, etc, so some change may break one of these scripts, or new MSRs
may use some different #define pattern, etc.
E.g.:
$ ls -1 tools/perf/trace/beauty/*.sh | head -5
tools/perf/trace/beauty/arch_errno_names.sh
tools/perf/trace/beauty/drm_ioctl.sh
tools/perf/trace/beauty/fadvise.sh
tools/perf/trace/beauty/fsconfig.sh
tools/perf/trace/beauty/fsmount.sh
$
$ tools/perf/trace/beauty/fadvise.sh
static const char *fadvise_advices[] = {
[0] = "NORMAL",
[1] = "RANDOM",
[2] = "SEQUENTIAL",
[3] = "WILLNEED",
[4] = "DONTNEED",
[5] = "NOREUSE",
};
$
The tools/perf/check-headers.sh script, part of the tools/ build
process, points out changes in the original files.
So its important not to touch the copies in tools/ when doing changes in
the original kernel headers, that will be done later, when
check-headers.sh inform about the change to the perf tools hackers.
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: "Theodore Y. Ts'o" <tytso@mit.edu>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: linux-fscrypt@vger.kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20231121225650.390246-2-namhyung@kernel.org
tldr; Just FYI, I'm carrying this on the perf tools tree.
Full explanation:
There used to be no copies, with tools/ code using kernel headers
directly. From time to time tools/perf/ broke due to legitimate kernel
hacking. At some point Linus complained about such direct usage. Then we
adopted the current model.
The way these headers are used in perf are not restricted to just
including them to compile something.
There are sometimes used in scripts that convert defines into string
tables, etc, so some change may break one of these scripts, or new MSRs
may use some different #define pattern, etc.
E.g.:
$ ls -1 tools/perf/trace/beauty/*.sh | head -5
tools/perf/trace/beauty/arch_errno_names.sh
tools/perf/trace/beauty/drm_ioctl.sh
tools/perf/trace/beauty/fadvise.sh
tools/perf/trace/beauty/fsconfig.sh
tools/perf/trace/beauty/fsmount.sh
$
$ tools/perf/trace/beauty/fadvise.sh
static const char *fadvise_advices[] = {
[0] = "NORMAL",
[1] = "RANDOM",
[2] = "SEQUENTIAL",
[3] = "WILLNEED",
[4] = "DONTNEED",
[5] = "NOREUSE",
};
$
The tools/perf/check-headers.sh script, part of the tools/ build
process, points out changes in the original files.
So its important not to touch the copies in tools/ when doing changes in
the original kernel headers, that will be done later, when
check-headers.sh inform about the change to the perf tools hackers.
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20231121225650.390246-1-namhyung@kernel.org
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmVdgqYTHHdlaS5saXVA
a2VybmVsLm9yZwAKCRB2FHBfkEGgXhBsCACzUGLF3vOQdrmgTMymzaaOzfLJtvNW
oQ34FwMJMOAyJ6FxM12IJPHA2j+azl9CPjQc5O6F2CBcF8hVj2mDIINQIi+4wpV5
FQv445g2KFml/+AJr/1waz1GmhHtr1rfu7B7NX6tPUtOpxKN7AHAQXWYmHnwK8BJ
5Mh2a/7Lphjin4M1FWCeBTj0JtqF1oVAW2L9jsjqogq1JV0a51DIFutROtaPSC/4
ssTLM5Rqpnw8Z1GWVYD2PObIW4A+h1LV1tNGOIoGW6mX56mPU+KmVA7tTKr8Je/i
z3Jk8bZXFyLvPW2+KNJacbldKNcfwAFpReffNz/FO3R16Stq9Ta1mcE2
=wXju
-----END PGP SIGNATURE-----
Merge tag 'hyperv-fixes-signed-20231121' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv fixes from Wei Liu:
- One fix for the KVP daemon (Ani Sinha)
- Fix for the detection of E820_TYPE_PRAM in a Gen2 VM (Saurabh Sengar)
- Micro-optimization for hv_nmi_unknown() (Uros Bizjak)
* tag 'hyperv-fixes-signed-20231121' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
x86/hyperv: Use atomic_try_cmpxchg() to micro-optimize hv_nmi_unknown()
x86/hyperv: Fix the detection of E820_TYPE_PRAM in a Gen2 VM
hv/hv_kvp_daemon: Some small fixes for handling NM keyfiles
Fix a build error on 32-bit system:
util/bpf_lock_contention.c: In function 'lock_contention_get_name':
util/bpf_lock_contention.c:253:50: error: format '%lu' expects argument of type 'long unsigned int', but argument 4 has type 'u64 {aka long long unsigned int}' [-Werror=format=]
snprintf(name_buf, sizeof(name_buf), "cgroup:%lu", cgrp_id);
~~^
%llu
cc1: all warnings being treated as errors
Fixes: d0c502e46e ("perf lock contention: Prepare to handle cgroups")
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: avagin@google.com
Cc: daniel.diaz@linaro.org
Link: https://lore.kernel.org/r/20231118024858.1567039-3-yangjihong1@huawei.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
lkft reported a build error for 32-bit system:
builtin-kwork.c: In function 'top_print_work':
builtin-kwork.c:1646:28: error: format '%ld' expects argument of
type 'long int', but argument 3 has type 'u64' {aka 'long long
unsigned int'} [-Werror=format=]
1646 | ret += printf(" %*ld ", PRINT_PID_WIDTH, work->id);
| ~~~^ ~~~~~~~~
| | |
| long int u64
{aka long long unsigned int}
| %*lld
cc1: all warnings being treated as errors
make[3]: *** [/builds/linux/tools/build/Makefile.build:106:
/home/tuxbuild/.cache/tuxmake/builds/1/build/builtin-kwork.o] Error 1
Fix it.
Fixes: 55c40e5052 ("perf kwork top: Introduce new top utility")
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: avagin@google.com
Cc: daniel.diaz@linaro.org
Link: https://lore.kernel.org/r/20231118024858.1567039-2-yangjihong1@huawei.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Check that even if bpf_loop() callback simulation does not converge to
a specific state, verification could proceed via "brute force"
simulation of maximal number of callback calls.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20231121020701.26440-12-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In some cases verifier can't infer convergence of the bpf_loop()
iteration. E.g. for the following program:
static int cb(__u32 idx, struct num_context* ctx)
{
ctx->i++;
return 0;
}
SEC("?raw_tp")
int prog(void *_)
{
struct num_context ctx = { .i = 0 };
__u8 choice_arr[2] = { 0, 1 };
bpf_loop(2, cb, &ctx, 0);
return choice_arr[ctx.i];
}
Each 'cb' simulation would eventually return to 'prog' and reach
'return choice_arr[ctx.i]' statement. At which point ctx.i would be
marked precise, thus forcing verifier to track multitude of separate
states with {.i=0}, {.i=1}, ... at bpf_loop() callback entry.
This commit allows "brute force" handling for such cases by limiting
number of callback body simulations using 'umax' value of the first
bpf_loop() parameter.
For this, extend bpf_func_state with 'callback_depth' field.
Increment this field when callback visiting state is pushed to states
traversal stack. For frame #N it's 'callback_depth' field counts how
many times callback with frame depth N+1 had been executed.
Use bpf_func_state specifically to allow independent tracking of
callback depths when multiple nested bpf_loop() calls are present.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20231121020701.26440-11-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
A test case to verify that imprecise scalars widening is applied to
callback entering state, when callback call is simulated repeatedly.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20231121020701.26440-10-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
A set of test cases to check behavior of callback handling logic,
check if verifier catches the following situations:
- program not safe on second callback iteration;
- program not safe on zero callback iterations;
- infinite loop inside a callback.
Verify that callback logic works for bpf_loop, bpf_for_each_map_elem,
bpf_user_ringbuf_drain, bpf_find_vma.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20231121020701.26440-8-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Prior to this patch callbacks were handled as regular function calls,
execution of callback body was modeled exactly once.
This patch updates callbacks handling logic as follows:
- introduces a function push_callback_call() that schedules callback
body verification in env->head stack;
- updates prepare_func_exit() to reschedule callback body verification
upon BPF_EXIT;
- as calls to bpf_*_iter_next(), calls to callback invoking functions
are marked as checkpoints;
- is_state_visited() is updated to stop callback based iteration when
some identical parent state is found.
Paths with callback function invoked zero times are now verified first,
which leads to necessity to modify some selftests:
- the following negative tests required adding release/unlock/drop
calls to avoid previously masked unrelated error reports:
- cb_refs.c:underflow_prog
- exceptions_fail.c:reject_rbtree_add_throw
- exceptions_fail.c:reject_with_cp_reference
- the following precision tracking selftests needed change in expected
log trace:
- verifier_subprog_precision.c:callback_result_precise
(note: r0 precision is no longer propagated inside callback and
I think this is a correct behavior)
- verifier_subprog_precision.c:parent_callee_saved_reg_precise_with_callback
- verifier_subprog_precision.c:parent_stack_slot_precise_with_callback
Reported-by: Andrew Werner <awerner32@gmail.com>
Closes: https://lore.kernel.org/bpf/CA+vRuzPChFNXmouzGG+wsy=6eMcfr1mFG0F3g7rbg-sedGKW3w@mail.gmail.com/
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20231121020701.26440-7-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This is a preparatory change. A follow-up patch "bpf: verify callbacks
as if they are called unknown number of times" changes logic for
callbacks handling. While previously callbacks were verified as a
single function call, new scheme takes into account that callbacks
could be executed unknown number of times.
This has dire implications for bpf_loop_bench:
SEC("fentry/" SYS_PREFIX "sys_getpgid")
int benchmark(void *ctx)
{
for (int i = 0; i < 1000; i++) {
bpf_loop(nr_loops, empty_callback, NULL, 0);
__sync_add_and_fetch(&hits, nr_loops);
}
return 0;
}
W/o callbacks change verifier sees it as a 1000 calls to
empty_callback(). However, with callbacks change things become
exponential:
- i=0: state exploring empty_callback is scheduled with i=0 (a);
- i=1: state exploring empty_callback is scheduled with i=1;
...
- i=999: state exploring empty_callback is scheduled with i=999;
- state (a) is popped from stack;
- i=1: state exploring empty_callback is scheduled with i=1;
...
Avoid this issue by rewriting outer loop as bpf_loop().
Unfortunately, this adds a function call to a loop at runtime, which
negatively affects performance:
throughput latency
before: 149.919 ± 0.168 M ops/s, 6.670 ns/op
after : 137.040 ± 0.187 M ops/s, 7.297 ns/op
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20231121020701.26440-4-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This change prepares strobemeta for update in callbacks verification
logic. To allow bpf_loop() verification converge when multiple
callback iterations are considered:
- track offset inside strobemeta_payload->payload directly as scalar
value;
- at each iteration make sure that remaining
strobemeta_payload->payload capacity is sufficient for execution of
read_{map,str}_var functions;
- make sure that offset is tracked as unbound scalar between
iterations, otherwise verifier won't be able infer that bpf_loop
callback reaches identical states.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20231121020701.26440-3-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This change prepares syncookie_{tc,xdp} for update in callbakcs
verification logic. To allow bpf_loop() verification converge when
multiple callback itreations are considered:
- track offset inside TCP payload explicitly, not as a part of the
pointer;
- make sure that offset does not exceed MAX_PACKET_OFF enforced by
verifier;
- make sure that offset is tracked as unbound scalar between
iterations, otherwise verifier won't be able infer that bpf_loop
callback reaches identical states.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20231121020701.26440-2-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Extend the existing tc_redirect selftest to also cover netkit devices
for exercising the bpf_redirect_peer() code paths, so that we have both
veth as well as netkit covered, all tests still pass after this change.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20231114004220.6495-9-daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
No functional changes to the test case, but just renaming various functions,
variables, etc, to remove veth part of their name for making it more generic
and reusable later on (e.g. for netkit).
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20231114004220.6495-8-daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
