IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
[ Upstream commit cc8294ec4738d25e2bb2d71f7d82a9bf7f4a157b ]
__setup() handlers should return 1 if the command line option is handled
and 0 if not (or maybe never return 0; doing so just pollutes init's
environment with strings that are not init arguments/parameters).
Return 1 from aha152x_setup() to indicate that the boot option has been
handled.
Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru
Link: https://lore.kernel.org/r/20220223000623.5920-1-rdunlap@infradead.org
Cc: "Juergen E. Fischer" <fischer@norbit.de>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8b91cee5eadd2021f55e6775f2d50bd56d00c217 ]
Hash faults are not resoved in NMI context, instead causing the access
to fail. This is done because perf interrupts can get backtraces
including walking the user stack, and taking a hash fault on those could
deadlock on the HPTE lock if the perf interrupt hits while the same HPTE
lock is being held by the hash fault code. The user-access for the stack
walking will notice the access failed and deal with that in the perf
code.
The reason to allow perf interrupts in is to better profile hash faults.
The problem with this is any hash fault on a kernel access that happens
in NMI context will crash, because kernel accesses must not fail.
Hard lockups, system reset, machine checks that access vmalloc space
including modules and including stack backtracing and symbol lookup in
modules, per-cpu data, etc could all run into this problem.
Fix this by disallowing perf interrupts in the hash fault code (the
direct hash fault is covered by MSR[EE]=0 so the PMI disable just needs
to extend to the preload case). This simplifies the tricky logic in hash
faults and perf, at the cost of reduced profiling of hash faults.
perf can still latch addresses when interrupts are disabled, it just
won't get the stack trace at that point, so it would still find hot
spots, just sometimes with confusing stack chains.
An alternative could be to allow perf interrupts here but always do the
slowpath stack walk if we are in nmi context, but that slows down all
perf interrupt stack walking on hash though and it does not remove as
much tricky code.
Reported-by: Laurent Dufour <ldufour@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Laurent Dufour <ldufour@linux.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220204035348.545435-1-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 28225a6ef80ebf46c46e5fbd5b1ee231a0b2b5b7 ]
Before, the hardware would be allowed to transmit injected 802.11 MPDUs
as A-MSDU. This resulted in corrupted frames being transmitted. Now,
injected MPDUs are transmitted as-is, without A-MSDU.
The fix was verified with frame injection on MT7915 hardware, both with
and without the injected frame being encrypted.
If the hardware cannot do A-MSDU aggregation on MPDUs, this problem
would also be present in the TX path where mac80211 does the 802.11
encapsulation. However, I have not observed any such problem when
disabling IEEE80211_HW_SUPPORTS_TX_ENCAP_OFFLOAD to force that mode.
Therefore this fix is isolated to injected frames only.
The same A-MSDU logic is also present in the mt7921 driver, so it is
likely that this fix should be applied there too. I do not have access
to mt7921 hardware so I have not been able to test that.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f792a3629f4c4aa4c3703d66b43ce1edcc3ec09a ]
In pm8001_chip_fw_flash_update_build(), if
pm8001_chip_fw_flash_update_build() fails, the struct fw_control_ex
allocated must be freed.
Link: https://lore.kernel.org/r/20220220031810.738362-23-damien.lemoal@opensource.wdc.com
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4c8f04b1905cd4b776d0b720463c091545478ef7 ]
In pm8001_chip_set_dev_state_req(), pm8001_chip_fw_flash_update_req(),
pm80xx_chip_phy_ctl_req() and pm8001_chip_reg_dev_req() add missing calls
to pm8001_tag_free() to free the allocated tag when pm8001_mpi_build_cmd()
fails.
Similarly, in pm8001_exec_internal_task_abort(), if the chip ->task_abort
method fails, the tag allocated for the abort request task must be
freed. Add the missing call to pm8001_tag_free().
Link: https://lore.kernel.org/r/20220220031810.738362-22-damien.lemoal@opensource.wdc.com
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f90a74892f3acf0cdec5844e90fc8686ca13e7d7 ]
In pm8001_send_abort_all(), make sure to free the allocated sas task
if pm8001_tag_alloc() or pm8001_mpi_build_cmd() fail.
Link: https://lore.kernel.org/r/20220220031810.738362-21-damien.lemoal@opensource.wdc.com
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7e6b7e740addcea450041b5be8e42f0a4ceece0f ]
The call to pm8001_ccb_task_free() at the end of
pm8001_mpi_task_abort_resp() already frees the ccb tag. So when the device
NCQ_ABORT_ALL_FLAG is set, the tag should not be freed again. Also change
the hardcoded 0xBFFFFFFF value to ~NCQ_ABORT_ALL_FLAG as it ought to be.
Link: https://lore.kernel.org/r/20220220031810.738362-19-damien.lemoal@opensource.wdc.com
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3762d8f6edcdb03994c919f9487fd6d336c06561 ]
The declaration of the local variable destination1 in pm80xx_pci_mem_copy()
as a pointer to a u32 results in the sparse warning:
warning: incorrect type in assignment (different base types)
expected unsigned int [usertype]
got restricted __le32 [usertype]
Furthermore, the destination" argument of pm80xx_pci_mem_copy() is wrongly
declared with the const attribute.
Fix both problems by changing the type of the "destination" argument to
"__le32 *" and use this argument directly inside the pm80xx_pci_mem_copy()
function, thus removing the need for the destination1 local variable.
Link: https://lore.kernel.org/r/20220220031810.738362-6-damien.lemoal@opensource.wdc.com
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6e031ec0e5a2dda53e12e0d2a7e9b15b47a3c502 ]
Resolve build errors reported against UML build for undefined
ioport_map() and ioport_unmap() functions. Without this config
option a device cannot have vfio_pci_core_device.has_vga set,
so the existing function would always return -EINVAL anyway.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20220123125737.2658758-1-geert@linux-m68k.org
Link: https://lore.kernel.org/r/164306582968.3758255.15192949639574660648.stgit@omen
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9dff13f9edf755a15f6507874185a3290c1ae8bb ]
The driver has a fallback so make the message informational
rather than a warning. The driver has a fallback if the
Component Resource Association Table (CRAT) is missing, so
make this informational now.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1906
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fa247089de9936a46e290d4724cb5f0b845600f5 ]
Update both bio-based and request-based DM to requeue IO if the
mapping table not available.
This race of IO being submitted before the DM device ready is so
narrow, yet possible for initial table load given that the DM device's
request_queue is created prior, that it best to requeue IO to handle
this unlikely case.
Reported-by: Zhang Yi <yi.zhang@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cd9c88da171a62c4b0f1c70e50c75845969fbc18 ]
It appears like cmd could be a Spectre v1 gadget as it's supplied by a
user and used as an array index. Prevent the contents of kernel memory
from being leaked to userspace via speculative execution by using
array_index_nospec.
Signed-off-by: Jordy Zomer <jordy@pwning.systems>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0c51e12e218f20b7d976158fdc18019627326f7a ]
In case user space sends a packet destined to a broadcast address when a
matching broadcast route is not configured, the kernel will create a
unicast neighbour entry that will never be resolved [1].
When the broadcast route is configured, the unicast neighbour entry will
not be invalidated and continue to linger, resulting in packets being
dropped.
Solve this by invalidating unresolved neighbour entries for broadcast
addresses after routes for these addresses are internally configured by
the kernel. This allows the kernel to create a broadcast neighbour entry
following the next route lookup.
Another possible solution that is more generic but also more complex is
to have the ARP code register a listener to the FIB notification chain
and invalidate matching neighbour entries upon the addition of broadcast
routes.
It is also possible to wave off the issue as a user space problem, but
it seems a bit excessive to expect user space to be that intimately
familiar with the inner workings of the FIB/neighbour kernel code.
[1] https://lore.kernel.org/netdev/55a04a8f-56f3-f73c-2aea-2195923f09d1@huawei.com/
Reported-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 24b176d8827d167ac3b379317f60c0985f6e95aa ]
Quoting the header comments, IRQF_ONESHOT is "Used by threaded interrupts
which need to keep the irq line disabled until the threaded handler has
been run.". When applied to an interrupt that doesn't request a threaded
irq then IRQF_ONESHOT has a lesser known (undocumented?) side effect,
which it to disable the forced threading of irqs (and for "normal" kernels
it is a nop). In this case I can find no evidence that suppressing forced
threading is intentional. Had it been intentional then a driver must adopt
the raw_spinlock API in order to avoid deadlocks on PREEMPT_RT kernels
(and avoid calling any kernel API that uses regular spinlocks).
Fix this by removing the spurious additional flag.
This change is required for my Snapdragon 7cx Gen2 tablet to boot-to-GUI
with PREEMPT_RT enabled.
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220201174734.196718-2-daniel.thompson@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e04135c07755d001b5cde61048c69a7cc84bb94b ]
During disassociation we're decreasing the phy's ref count.
If the ref count becomes 0, we're configuring the phy ctxt
to the default channel (the lowest channel which the device
can operate on). Currently we're not checking whether the
the default channel is enabled or not. Fix it by configuring
the phy ctxt to the lowest channel which is enabled.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220210181930.03f281b6a6bc.I5b63d43ec41996d599e6f37ec3f32e878b3e405e@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d8d4dd26b9e0469baf5017f0544d852fd4e3fb6d ]
Currently, fragmented EBS was set for a channel only if the 'hb_type'
was set to fragmented or balanced scan. However, 'hb_type' is set only
in case of CDB, and thus fragmented EBS is never set for a channel for
non-CDB devices. Fix it.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220204122220.a6165ac9b9d5.I654eafa62fd647030ae6d4f07f32c96c3171decb@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e285cb403994419e997749c9a52b9370884ae0c8 ]
The quirk handling may need to set some different properties
which means using a different swnode, move the setting of the swnode
to inside dwc3_pci_quirks() so that the quirk handling can choose
a different swnode.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220213130524.18748-4-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d08c6e2a4d0308a7922d7ef3b1b3af45d4096aad ]
Normally, the queues are disabled when the channels are deactivated, and
enabled when the channels are activated. However, on register, the
channels are not active, but the queues are enabled by default. This
change fixes it, preventing mlx5e_xmit from running when the channels
are deactivated in the beginning.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5ac121b81b4051e7fc83d5b3456a5e499d5bd147 ]
The AXP288's recommended and factory default Vhold value (minimum
input voltage below which the input current draw will be reduced)
is 4.4V. This lines up with other charger IC's such as the TI
bq2419x/bq2429x series which use 4.36V or 4.44V.
For some reason some BIOS-es initialize Vhold to 4.6V or even 4.7V
which combined with the typical voltage drop over typically low
wire gauge micro-USB cables leads to the input-current getting
capped below 1A (with a 2A capable dedicated charger) based on Vhold.
This leads to slow charging, or even to the device slowly discharging
if the device is in heavy use.
As the Linux AXP288 drivers use the builtin BC1.2 charger detection
and send the input-current-limit according to the detected charger
there really is no reason not to use the recommended 4.4V Vhold.
Set Vhold to 4.4V to fix the slow charging issue on various devices.
There is one exception, the special-case of the HP X2 2-in-1s which
combine this BC1.2 capable PMIC with a Type-C port and a 5V/3A factory
provided charger with a Type-C plug which does not do BC1.2. These
have their input-current-limit hardcoded to 3A (like under Windows)
and use a higher Vhold on purpose to limit the current when used
with other chargers. To avoid touching Vhold on these HP X2 laptops
the code setting Vhold is added to an else branch of the if checking
for these models.
Note this also fixes the sofar unused VBUS_ISPOUT_VHOLD_SET_MASK
define, which was wrong.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a4c182ecf33584b9b2d1aa9dad073014a504c01f ]
Commit 1f9ad21c3b38 ("powerpc/mm: Implement set_memory() routines")
included a spin_lock() to change_page_attr() in order to
safely perform the three step operations. But then
commit 9f7853d7609d ("powerpc/mm: Fix set_memory_*() against
concurrent accesses") modify it to use pte_update() and do
the operation safely against concurrent access.
In the meantime, Maxime reported some spinlock recursion.
[ 15.351649] BUG: spinlock recursion on CPU#0, kworker/0:2/217
[ 15.357540] lock: init_mm+0x3c/0x420, .magic: dead4ead, .owner: kworker/0:2/217, .owner_cpu: 0
[ 15.366563] CPU: 0 PID: 217 Comm: kworker/0:2 Not tainted 5.15.0+ #523
[ 15.373350] Workqueue: events do_free_init
[ 15.377615] Call Trace:
[ 15.380232] [e4105ac0] [800946a4] do_raw_spin_lock+0xf8/0x120 (unreliable)
[ 15.387340] [e4105ae0] [8001f4ec] change_page_attr+0x40/0x1d4
[ 15.393413] [e4105b10] [801424e0] __apply_to_page_range+0x164/0x310
[ 15.400009] [e4105b60] [80169620] free_pcp_prepare+0x1e4/0x4a0
[ 15.406045] [e4105ba0] [8016c5a0] free_unref_page+0x40/0x2b8
[ 15.411979] [e4105be0] [8018724c] kasan_depopulate_vmalloc_pte+0x6c/0x94
[ 15.418989] [e4105c00] [801424e0] __apply_to_page_range+0x164/0x310
[ 15.425451] [e4105c50] [80187834] kasan_release_vmalloc+0xbc/0x134
[ 15.431898] [e4105c70] [8015f7a8] __purge_vmap_area_lazy+0x4e4/0xdd8
[ 15.438560] [e4105d30] [80160d10] _vm_unmap_aliases.part.0+0x17c/0x24c
[ 15.445283] [e4105d60] [801642d0] __vunmap+0x2f0/0x5c8
[ 15.450684] [e4105db0] [800e32d0] do_free_init+0x68/0x94
[ 15.456181] [e4105dd0] [8005d094] process_one_work+0x4bc/0x7b8
[ 15.462283] [e4105e90] [8005d614] worker_thread+0x284/0x6e8
[ 15.468227] [e4105f00] [8006aaec] kthread+0x1f0/0x210
[ 15.473489] [e4105f40] [80017148] ret_from_kernel_thread+0x14/0x1c
Remove the read / modify / write sequence to make the operation atomic
and remove the spin_lock() in change_page_attr().
To do the operation atomically, we can't use pte modification helpers
anymore. Because all platforms have different combination of bits, it
is not easy to use those bits directly. But all have the
_PAGE_KERNEL_{RO/ROX/RW/RWX} set of flags. All we need it to compare
two sets to know which bits are set or cleared.
For instance, by comparing _PAGE_KERNEL_ROX and _PAGE_KERNEL_RO you
know which bit gets cleared and which bit get set when changing exec
permission.
Reported-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/all/20211212112152.GA27070@sakura/
Link: https://lore.kernel.org/r/43c3c76a1175ae6dc1a3d3b5c3f7ecb48f683eea.1640344012.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d44b5fefb22e139408ae12b864da1ecb9ad9d1d2 ]
Fix memory leaks related to operational reply queue's memory segments which
are not getting freed while unloading the driver.
Link: https://lore.kernel.org/r/20220210095817.22828-9-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9992246127246a27cc7184f05cce6f62ac48f84e ]
The driver is missing to set the residual size while completing an
I/O. Ensure proper data transfer size is reported to the kernel on I/O
completion based on the transfer length reported by the firmware.
Link: https://lore.kernel.org/r/20220210095817.22828-7-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9f72d4757cbe4d1ed669192f6d23817c9e437c4b ]
The Qualcomm PCI bridge device (Device ID 0x0110) found in chipsets such as
SM8450 does not set the Command Completed bit unless writes to the Slot
Command register change "Control" bits.
This results in timeouts like below:
pcieport 0001:00:00.0: pciehp: Timeout on hotplug command 0x03c0 (issued 2020 msec ago)
Add the device to the Command Completed quirk to mark commands "completed"
immediately unless they change the "Control" bits.
Link: https://lore.kernel.org/r/20220210145003.135907-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4f9bf2a2f5aacf988e6d5e56b961ba45c5a25248 ]
Commit
9652dc2eb9e40 ("tcp: relax listening_hash operations")
removed the need to disable bottom half while acquiring
listening_hash.lock. There are still two callers left which disable
bottom half before the lock is acquired.
On PREEMPT_RT the softirqs are preemptible and local_bh_disable() acts
as a lock to ensure that resources, that are protected by disabling
bottom halves, remain protected.
This leads to a circular locking dependency if the lock acquired with
disabled bottom halves is also acquired with enabled bottom halves
followed by disabling bottom halves. This is the reverse locking order.
It has been observed with inet_listen_hashbucket:🔒
local_bh_disable() + spin_lock(&ilb->lock):
inet_listen()
inet_csk_listen_start()
sk->sk_prot->hash() := inet_hash()
local_bh_disable()
__inet_hash()
spin_lock(&ilb->lock);
acquire(&ilb->lock);
Reverse order: spin_lock(&ilb2->lock) + local_bh_disable():
tcp_seq_next()
listening_get_next()
spin_lock(&ilb2->lock);
acquire(&ilb2->lock);
tcp4_seq_show()
get_tcp4_sock()
sock_i_ino()
read_lock_bh(&sk->sk_callback_lock);
acquire(softirq_ctrl) // <---- whoops
acquire(&sk->sk_callback_lock)
Drop local_bh_disable() around __inet_hash() which acquires
listening_hash->lock. Split inet_unhash() and acquire the
listen_hashbucket lock without disabling bottom halves; the inet_ehash
lock with disabled bottom halves.
Reported-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lkml.kernel.org/r/12d6f9879a97cd56c09fb53dee343cbb14f7f1f7.camel@gmx.de
Link: https://lkml.kernel.org/r/X9CheYjuXWc75Spa@hirez.programming.kicks-ass.net
Link: https://lore.kernel.org/r/YgQOebeZ10eNx1W6@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 30de2b541af98179780054836b48825fcfba4408 ]
During event processing, events are read from the event queue one
by one until the queue is empty.If the master device continuously
requests address access at the same time and the SMMU generates
events, the cyclic processing of the event takes a long time and
softlockup warnings may be reported.
arm-smmu-v3 arm-smmu-v3.34.auto: event 0x0a received:
arm-smmu-v3 arm-smmu-v3.34.auto: 0x00007f220000280a
arm-smmu-v3 arm-smmu-v3.34.auto: 0x000010000000007e
arm-smmu-v3 arm-smmu-v3.34.auto: 0x00000000034e8670
watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [irq/268-arm-smm:247]
Call trace:
_dev_info+0x7c/0xa0
arm_smmu_evtq_thread+0x1c0/0x230
irq_thread_fn+0x30/0x80
irq_thread+0x128/0x210
kthread+0x134/0x138
ret_from_fork+0x10/0x1c
Kernel panic - not syncing: softlockup: hung tasks
Fix this by calling cond_resched() after the event information is
printed.
Signed-off-by: Zhou Guanghui <zhouguanghui1@huawei.com>
Link: https://lore.kernel.org/r/20220119070754.26528-1-zhouguanghui1@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b0b0b8b897f8e12b2368e868bd7cdc5742d5c5a9 ]
Aardvark hardware supports Multi-MSI and MSI_FLAG_MULTI_PCI_MSI is already
set for the MSI chip. But when allocating MSI interrupt numbers for
Multi-MSI, the numbers need to be properly aligned, otherwise endpoint
devices send MSI interrupt with incorrect numbers.
Fix this issue by using function bitmap_find_free_region() instead of
bitmap_find_next_zero_area().
To ensure that aligned MSI interrupt numbers are used by endpoint devices,
we cannot use Linux virtual irq numbers (as they are random and not
properly aligned). Instead we need to use the aligned hwirq numbers.
This change fixes receiving MSI interrupts on Armada 3720 boards and
allows using NVMe disks which use Multi-MSI feature with 3 interrupts.
Without this NVMe disks freeze booting as linux nvme-core.c is waiting
60s for an interrupt.
Link: https://lore.kernel.org/r/20220110015018.26359-4-kabel@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3ada501d602abf02353445c03bb3258146445d90 ]
Avoid dropping into shell if the controller is in locked up state.
Driver issues SIS soft reset to bring back the controller to SIS mode while
OS boots into kdump mode.
If the controller is in lockup state, SIS soft reset does not work.
Since the controller lockup code has not been cleared, driver considers the
firmware is no longer up and running. Driver returns back an error code to
OS and the kdump fails.
Link: https://lore.kernel.org/r/164375212337.440833.11955356190354940369.stgit@brunhilda.pdev.net
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Signed-off-by: Mahesh Rajashekhara <mahesh.rajashekhara@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7c5ed82b800d8615cdda00729e7b62e5899f0b13 ]
On large config LPARs (having 192 and more cores), Linux fails to boot
due to insufficient memory in the first memblock. It is due to the
memory reservation for the crash kernel which starts at 128MB offset of
the first memblock. This memory reservation for the crash kernel doesn't
leave enough space in the first memblock to accommodate other essential
system resources.
The crash kernel start address was set to 128MB offset by default to
ensure that the crash kernel get some memory below the RMA region which
is used to be of size 256MB. But given that the RMA region size can be
512MB or more, setting the crash kernel offset to mid of RMA size will
leave enough space for the kernel to allocate memory for other system
resources.
Since the above crash kernel offset change is only applicable to the LPAR
platform, the LPAR feature detection is pushed before the crash kernel
reservation. The rest of LPAR specific initialization will still
be done during pseries_probe_fw_features as usual.
This patch is dependent on changes to paca allocation for boot CPU. It
expect boot CPU to discover 1T segment support which is introduced by
the patch posted here:
https://lists.ozlabs.org/pipermail/linuxppc-dev/2022-January/239175.html
Reported-by: Abdul haleem <abdhalee@linux.vnet.ibm.com>
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220204085601.107257-1-sourabhjain@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9c1be1935fb68b2413796cdc03d019b8cf35ab51 ]
While testing a patch that will follow later
("net: add netns refcount tracker to struct nsproxy")
I found that devtmpfs_init() was called before init_net
was initialized.
This is a bug, because devtmpfs_setup() calls
ksys_unshare(CLONE_NEWNS);
This has the effect of increasing init_net refcount,
which will be later overwritten to 1, as part of setup_net(&init_net)
We had too many prior patches [1] trying to work around the root cause.
Really, make sure init_net is in BSS section, and that net_ns_init()
is called earlier at boot time.
Note that another patch ("vfs: add netns refcount tracker
to struct fs_context") also will need net_ns_init() being called
before vfs_caches_init()
As a bonus, this patch saves around 4KB in .data section.
[1]
f8c46cb39079 ("netns: do not call pernet ops for not yet set up init_net namespace")
b5082df8019a ("net: Initialise init_net.count to 1")
734b65417b24 ("net: Statically initialize init_net.dev_base_head")
v2: fixed a build error reported by kernel build bots (CONFIG_NET=n)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 145c7a793838add5e004e7d49a67654dc7eba147 ]
This fixes minor data-races in ip6_mc_input() and
batadv_mcast_mla_rtr_flags_softif_get_ipv6()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0908a66ad1124c1634c33847ac662106f7f2c198 ]
There are cases where clang compiler is packaged in a way
readelf is a symbolic link to llvm-readelf. In such cases,
llvm-readelf will be used instead of default binutils readelf,
and the following error will appear during libbpf build:
# Warning: Num of global symbols in
# /home/yhs/work/bpf-next/tools/testing/selftests/bpf/tools/build/libbpf/sharedobjs/libbpf-in.o (367)
# does NOT match with num of versioned symbols in
# /home/yhs/work/bpf-next/tools/testing/selftests/bpf/tools/build/libbpf/libbpf.so libbpf.map (383).
# Please make sure all LIBBPF_API symbols are versioned in libbpf.map.
# --- /home/yhs/work/bpf-next/tools/testing/selftests/bpf/tools/build/libbpf/libbpf_global_syms.tmp ...
# +++ /home/yhs/work/bpf-next/tools/testing/selftests/bpf/tools/build/libbpf/libbpf_versioned_syms.tmp ...
# @@ -324,6 +324,22 @@
# btf__str_by_offset
# btf__type_by_id
# btf__type_cnt
# +LIBBPF_0.0.1
# +LIBBPF_0.0.2
# +LIBBPF_0.0.3
# +LIBBPF_0.0.4
# +LIBBPF_0.0.5
# +LIBBPF_0.0.6
# +LIBBPF_0.0.7
# +LIBBPF_0.0.8
# +LIBBPF_0.0.9
# +LIBBPF_0.1.0
# +LIBBPF_0.2.0
# +LIBBPF_0.3.0
# +LIBBPF_0.4.0
# +LIBBPF_0.5.0
# +LIBBPF_0.6.0
# +LIBBPF_0.7.0
# libbpf_attach_type_by_name
# libbpf_find_kernel_btf
# libbpf_find_vmlinux_btf_id
# make[2]: *** [Makefile:184: check_abi] Error 1
# make[1]: *** [Makefile:140: all] Error 2
The above failure is due to different printouts for some ABS
versioned symbols. For example, with the same libbpf.so,
$ /bin/readelf --dyn-syms --wide tools/lib/bpf/libbpf.so | grep "LIBBPF" | grep ABS
134: 0000000000000000 0 OBJECT GLOBAL DEFAULT ABS LIBBPF_0.5.0
202: 0000000000000000 0 OBJECT GLOBAL DEFAULT ABS LIBBPF_0.6.0
...
$ /opt/llvm/bin/readelf --dyn-syms --wide tools/lib/bpf/libbpf.so | grep "LIBBPF" | grep ABS
134: 0000000000000000 0 OBJECT GLOBAL DEFAULT ABS LIBBPF_0.5.0@@LIBBPF_0.5.0
202: 0000000000000000 0 OBJECT GLOBAL DEFAULT ABS LIBBPF_0.6.0@@LIBBPF_0.6.0
...
The binutils readelf doesn't print out the symbol LIBBPF_* version and llvm-readelf does.
Such a difference caused libbpf build failure with llvm-readelf.
The proposed fix filters out all ABS symbols as they are not part of the comparison.
This works for both binutils readelf and llvm-readelf.
Reported-by: Delyan Kratunov <delyank@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220204214355.502108-1-yhs@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5666ee154f4696c011dfa8544aaf5591b6b87515 ]
When adding 6GHz channels to scan request based on reported
co-located APs, don't add channels that have only APs with
"non-transmitted" BSSes if they only match the wildcard SSID since
they will be found by probing the "transmitted" BSS.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220202104617.f6ddf099f934.I231e55885d3644f292d00dfe0f42653269f2559e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 827e7799c61b978fbc2cc9dac66cb62401b2b3f0 ]
If the nic fails to start, it is possible that the
reset_work has already been scheduled. Ensure the
work item is canceled so we do not have use-after-free
crash in case cleanup is called before the work item
is executed.
This fixes crash on my x86_64 apu2 when mt7921k radio
fails to work. Radio still fails, but OS does not
crash.
Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d4f408cdcd26921c1268cb8dcbe8ffb6faf837f3 ]
As stated in [1], negative current values are used for discharging
batteries.
AXP PMICs internally have two different ADC channels for shunt current
measurement: one used during charging and one during discharging.
The values reported by these ADCs are unsigned.
While the driver properly selects ADC channel to get the data from,
it doesn't apply negative sign when reporting discharging current.
[1] Documentation/ABI/testing/sysfs-class-power
Signed-off-by: Evgeny Boger <boger@wirenboard.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e57c1a3bd5e8e0c7181f65ae55581f0236a8f284 ]
[why]
Unlock is needed on the error handling path to prevent dead lock.
v3d_submit_cl_ioctl and v3d_submit_csd_ioctl is missing unlock.
[how]
Fix this by changing goto target on the error handling path. So
changing the goto to target an error handling path
that includes drm_gem_unlock reservations.
Signed-off-by: Yongzhi Liu <lyz_cs@pku.edu.cn>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1643377262-109975-1-git-send-email-lyz_cs@pku.edu.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2245ea91fd3a04cafbe2f54911432a8657528c3b ]
coccinelle report:
./drivers/scsi/bfa/bfad_attr.c:908:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:860:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:888:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:853:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:808:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:728:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:822:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:927:9-17:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:900:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:874:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:714:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:839:8-16:
WARNING: use scnprintf or sprintf
Use sysfs_emit() instead of scnprintf() or sprintf().
Link: https://lore.kernel.org/r/def83ff75faec64ba592b867a8499b1367bae303.1643181468.git.yang.guang5@zte.com.cn
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Yang Guang <yang.guang5@zte.com.cn>
Signed-off-by: David Yang <davidcomponentone@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0ad3867b0f13e45cfee5a1298bfd40eef096116c ]
coccinelle report:
./drivers/scsi/mvsas/mv_init.c:699:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/mvsas/mv_init.c:747:8-16:
WARNING: use scnprintf or sprintf
Use sysfs_emit() instead of scnprintf() or sprintf().
Link: https://lore.kernel.org/r/c1711f7cf251730a8ceb5bdfc313bf85662b3395.1643182948.git.yang.guang5@zte.com.cn
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Yang Guang <yang.guang5@zte.com.cn>
Signed-off-by: David Yang <davidcomponentone@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4421a582718ab81608d8486734c18083b822390d ]
Menglong Dong reports that the documentation for the dst_port field in
struct bpf_sock is inaccurate and confusing. From the BPF program PoV, the
field is a zero-padded 16-bit integer in network byte order. The value
appears to the BPF user as if laid out in memory as so:
offsetof(struct bpf_sock, dst_port) + 0 <port MSB>
+ 8 <port LSB>
+16 0x00
+24 0x00
32-, 16-, and 8-bit wide loads from the field are all allowed, but only if
the offset into the field is 0.
32-bit wide loads from dst_port are especially confusing. The loaded value,
after converting to host byte order with bpf_ntohl(dst_port), contains the
port number in the upper 16-bits.
Remove the confusion by splitting the field into two 16-bit fields. For
backward compatibility, allow 32-bit wide loads from offsetof(struct
bpf_sock, dst_port).
While at it, allow loads 8-bit loads at offset [0] and [1] from dst_port.
Reported-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/r/20220130115518.213259-2-jakub@cloudflare.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 46f47807738441e354873546dde0b000106c068a ]
pm_runtime_get_sync() will increase the rumtime PM counter
even when it returns an error. Thus a pairing decrement is needed
to prevent refcount leak. Fix this by replacing this API with
pm_runtime_resume_and_get(), which will not change the runtime
PM counter on error. Besides, a matching decrement is needed
on the error handling path to keep the counter balanced.
Signed-off-by: Yongzhi Liu <lyz_cs@pku.edu.cn>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1643008835-73961-1-git-send-email-lyz_cs@pku.edu.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ea785a1a573b390a150010b3c5b81e1ccd8c98a8 ]
According to the man page of TCP_CORK [1], if set, don't send out
partial frames. All queued partial frames are sent when option is
cleared again.
When applications call setsockopt to disable TCP_CORK, this call is
protected by lock_sock(), and tries to mod_delayed_work() to 0, in order
to send pending data right now. However, the delayed work smc_tx_work is
also protected by lock_sock(). There introduces lock contention for
sending data.
To fix it, send pending data directly which acts like TCP, without
lock_sock() protected in the context of setsockopt (already lock_sock()ed),
and cancel unnecessary dealyed work, which is protected by lock.
[1] https://linux.die.net/man/7/tcp
Signed-off-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 17846485dff91acce1ad47b508b633dffc32e838 ]
T1040RDB has two RTL8211E-VB phys which requires setting
of internal delays for correct work.
Changing the phy-connection-type property to `rgmii-id`
will fix this issue.
Signed-off-by: Maxim Kiselev <bigunclemax@gmail.com>
Reviewed-by: Maxim Kochetkov <fido_max@inbox.ru>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211230151123.1258321-1-bigunclemax@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ac7c48c0cce00d03b3c95fddcccb0a45257e33e3 ]
SVM ioctls take proper svms->lock to handle race conditions, don't need
take process mutex to serialize ioctls. This also fixes circular locking
warning:
WARNING: possible circular locking dependency detected
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock((work_completion)(&svms->deferred_list_work));
lock(&process->mutex);
lock((work_completion)(&svms->deferred_list_work));
lock(&process->mutex);
*** DEADLOCK ***
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
