IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
__bpf_arch_text_poke does rewrite only for atomic nop5, emit_nops(xxx, 5)
emits non-atomic one which breaks fentry/fexit with k8 atomics:
P6_NOP5 == P6_NOP5_ATOMIC (0f1f440000 == 0f1f440000)
K8_NOP5 != K8_NOP5_ATOMIC (6666906690 != 6666666690)
Can be reproduced by doing "ideal_nops = k8_nops" in "arch_init_ideal_nops()
and running fexit_bpf2bpf selftest.
Fixes: e21aa341785c ("bpf: Fix fexit trampoline.")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210320000001.915366-1-sdf@google.com
Jean-Philippe Brucker says:
====================
Fix an issue with the libbpf BTF dump, see patch 1 for details.
Since [v1] I added the selftest in patch 2, though I couldn't figure out
a way to make it independent from the order in which debug info is
issued by the compiler.
[v1]: https://lore.kernel.org/bpf/20210318122700.396574-1-jean-philippe@linaro.org/
====================
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Bpftool used to issue forward declarations for a struct used as part of
a pointer to array, which is invalid. Add a test to check that the
struct is fully defined in this case:
@@ -134,9 +134,9 @@
};
};
-struct struct_in_array {};
+struct struct_in_array;
-struct struct_in_array_typed {};
+struct struct_in_array_typed;
typedef struct struct_in_array_typed struct_in_array_t[2];
@@ -189,3 +189,7 @@
struct struct_with_embedded_stuff _14;
};
+struct struct_in_array {};
+
+struct struct_in_array_typed {};
+
...
#13/1 btf_dump: syntax:FAIL
Suggested-by: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210319112554.794552-3-jean-philippe@linaro.org
The vmlinux.h generated from BTF is invalid when building
drivers/phy/ti/phy-gmii-sel.c with clang:
vmlinux.h:61702:27: error: array type has incomplete element type ‘struct reg_field’
61702 | const struct reg_field (*regfields)[3];
| ^~~~~~~~~
bpftool generates a forward declaration for this struct regfield, which
compilers aren't happy about. Here's a simplified reproducer:
struct inner {
int val;
};
struct outer {
struct inner (*ptr_to_array)[2];
} A;
After build with clang -> bpftool btf dump c -> clang/gcc:
./def-clang.h:11:23: error: array has incomplete element type 'struct inner'
struct inner (*ptr_to_array)[2];
Member ptr_to_array of struct outer is a pointer to an array of struct
inner. In the DWARF generated by clang, struct outer appears before
struct inner, so when converting BTF of struct outer into C, bpftool
issues a forward declaration to struct inner. With GCC the DWARF info is
reversed so struct inner gets fully defined.
That forward declaration is not sufficient when compilers handle an
array of the struct, even when it's only used through a pointer. Note
that we can trigger the same issue with an intermediate typedef:
struct inner {
int val;
};
typedef struct inner inner2_t[2];
struct outer {
inner2_t *ptr_to_array;
} A;
Becomes:
struct inner;
typedef struct inner inner2_t[2];
And causes:
./def-clang.h:10:30: error: array has incomplete element type 'struct inner'
typedef struct inner inner2_t[2];
To fix this, clear through_ptr whenever we encounter an intermediate
array, to make the inner struct part of a strong link and force full
declaration.
Fixes: 351131b51c7a ("libbpf: add btf_dump API for BTF-to-C conversion")
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210319112554.794552-2-jean-philippe@linaro.org
Add a selftest for commit e21aa341785c ("bpf: Fix fexit trampoline.")
to make sure that attaching fexit prog to a sleeping kernel function
will trigger appropriate trampoline and program destruction.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210318004523.55908-1-alexei.starovoitov@gmail.com
Daniel Borkmann says:
====================
pull-request: bpf 2021-03-18
The following pull-request contains BPF updates for your *net* tree.
We've added 10 non-merge commits during the last 4 day(s) which contain
a total of 14 files changed, 336 insertions(+), 94 deletions(-).
The main changes are:
1) Fix fexit/fmod_ret trampoline for sleepable programs, and also fix a ftrace
splat in modify_ftrace_direct() on address change, from Alexei Starovoitov.
2) Fix two oob speculation possibilities that allows unprivileged to leak mem
via side-channel, from Piotr Krysiuk and Daniel Borkmann.
3) Fix libbpf's netlink handling wrt SOCK_CLOEXEC, from Kumar Kartikeya Dwivedi.
4) Fix libbpf's error handling on failure in getting section names, from Namhyung Kim.
5) Fix tunnel collect_md BPF selftest wrt Geneve option handling, from Hangbin Liu.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Otherwise, there exists a small window between the opening and closing
of the socket fd where it may leak into processes launched by some other
thread.
Fixes: 949abbe88436 ("libbpf: add function to setup XDP")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20210317115857.6536-1-memxor@gmail.com
When it failed to get section names, it should call into
bpf_object__elf_finish() like others.
Fixes: 88a82120282b ("libbpf: Factor out common ELF operations and improve logging")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210317145414.884817-1-namhyung@kernel.org
The fexit/fmod_ret programs can be attached to kernel functions that can sleep.
The synchronize_rcu_tasks() will not wait for such tasks to complete.
In such case the trampoline image will be freed and when the task
wakes up the return IP will point to freed memory causing the crash.
Solve this by adding percpu_ref_get/put for the duration of trampoline
and separate trampoline vs its image life times.
The "half page" optimization has to be removed, since
first_half->second_half->first_half transition cannot be guaranteed to
complete in deterministic time. Every trampoline update becomes a new image.
The image with fmod_ret or fexit progs will be freed via percpu_ref_kill and
call_rcu_tasks. Together they will wait for the original function and
trampoline asm to complete. The trampoline is patched from nop to jmp to skip
fexit progs. They are freed independently from the trampoline. The image with
fentry progs only will be freed via call_rcu_tasks_trace+call_rcu_tasks which
will wait for both sleepable and non-sleepable progs to complete.
Fixes: fec56f5890d9 ("bpf: Introduce BPF trampoline")
Reported-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Paul E. McKenney <paulmck@kernel.org> # for RCU
Link: https://lore.kernel.org/bpf/20210316210007.38949-1-alexei.starovoitov@gmail.com
Currently, napi_thread_wait() checks for NAPI_STATE_SCHED bit to
determine if the kthread owns this napi and could call napi->poll() on
it. However, if socket busy poll is enabled, it is possible that the
busy poll thread grabs this SCHED bit (after the previous napi->poll()
invokes napi_complete_done() and clears SCHED bit) and tries to poll
on the same napi. napi_disable() could grab the SCHED bit as well.
This patch tries to fix this race by adding a new bit
NAPI_STATE_SCHED_THREADED in napi->state. This bit gets set in
____napi_schedule() if the threaded mode is enabled, and gets cleared
in napi_complete_done(), and we only poll the napi in kthread if this
bit is set. This helps distinguish the ownership of the napi between
kthread and other scenarios and fixes the race issue.
Fixes: 29863d41bb6e ("net: implement threaded-able napi poll loop support")
Reported-by: Martin Zaharinov <micron10@gmail.com>
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Wei Wang <weiwan@google.com>
Cc: Alexander Duyck <alexanderduyck@fb.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix up test_verifier error messages for the case where the original error
message changed, or for the case where pointer alu errors differ between
privileged and unprivileged tests. Also, add alternative tests for keeping
coverage of the original verifier rejection error message (fp alu), and
newly reject map_ptr += rX where rX == 0 given we now forbid alu on these
types for unprivileged. All test_verifier cases pass after the change. The
test case fixups were kept separate to ease backporting of core changes.
Signed-off-by: Piotr Krysiuk <piotras@gmail.com>
Co-developed-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Given we know the max possible value of ptr_limit at the time of retrieving
the latter, add basic assertions, so that the verifier can bail out if
anything looks odd and reject the program. Nothing triggered this so far,
but it also does not hurt to have these.
Signed-off-by: Piotr Krysiuk <piotras@gmail.com>
Co-developed-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
* HE (802.11ax) elements can be extended, handle that
* fix locking in network namespace changes that was
broken due to the RTNL-redux work
* various other small fixes
-----BEGIN PGP SIGNATURE-----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=ePzY
-----END PGP SIGNATURE-----
Merge tag 'mac80211-for-net-2021-03-17' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
First round of fixes for 5.12-rc:
* HE (802.11ax) elements can be extended, handle that
* fix locking in network namespace changes that was
broken due to the RTNL-redux work
* various other small fixes
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The ct_state validate should not only check the mask bit and also
check mask_bit & key_bit..
For the +new+est case example, The 'new' and 'est' bits should be
set in both state_mask and state flags. Or the -new-est case also
will be reject by kernel.
When Openvswitch with two flows
ct_state=+trk+new,action=commit,forward
ct_state=+trk+est,action=forward
A packet go through the kernel and the contrack state is invalid,
The ct_state will be +trk-inv. Upcall to the ovs-vswitchd, the
finally dp action will be drop with -new-est+trk.
Fixes: 1bcc51ac0731 ("net/sched: cls_flower: Reject invalid ct_state flags rules")
Fixes: 3aed8b63336c ("net/sched: cls_flower: validate ct_state for invalid and reply flags")
Signed-off-by: wenxu <wenxu@ucloud.cn>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We were linearizing non-TSO skbs that had too many frags, but
we weren't checking number of frags on TSO skbs. This could
lead to a bad page reference when we received a TSO skb with
more frags than the Tx descriptor could support.
v2: use gso_segs rather than yet another division
don't rework the check on the nr_frags
Fixes: 0f3154e6bcb3 ("ionic: Add Tx and Rx handling")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of having the mov32 with aux->alu_limit - 1 immediate, move this
operation to retrieve_ptr_limit() instead to simplify the logic and to
allow for subsequent sanity boundary checks inside retrieve_ptr_limit().
This avoids in future that at the time of the verifier masking rewrite
we'd run into an underflow which would not sign extend due to the nature
of mov32 instruction.
Signed-off-by: Piotr Krysiuk <piotras@gmail.com>
Co-developed-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
retrieve_ptr_limit() computes the ptr_limit for registers with stack and
map_value type. ptr_limit is the size of the memory area that is still
valid / in-bounds from the point of the current position and direction
of the operation (add / sub). This size will later be used for masking
the operation such that attempting out-of-bounds access in the speculative
domain is redirected to remain within the bounds of the current map value.
When masking to the right the size is correct, however, when masking to
the left, the size is off-by-one which would lead to an incorrect mask
and thus incorrect arithmetic operation in the non-speculative domain.
Piotr found that if the resulting alu_limit value is zero, then the
BPF_MOV32_IMM() from the fixup_bpf_calls() rewrite will end up loading
0xffffffff into AX instead of sign-extending to the full 64 bit range,
and as a result, this allows abuse for executing speculatively out-of-
bounds loads against 4GB window of address space and thus extracting the
contents of kernel memory via side-channel.
Fixes: 979d63d50c0c ("bpf: prevent out of bounds speculation on pointer arithmetic")
Signed-off-by: Piotr Krysiuk <piotras@gmail.com>
Co-developed-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
The purpose of this patch is to streamline error propagation and in particular
to propagate retrieve_ptr_limit() errors for pointer types that are not defining
a ptr_limit such that register-based alu ops against these types can be rejected.
The main rationale is that a gap has been identified by Piotr in the existing
protection against speculatively out-of-bounds loads, for example, in case of
ctx pointers, unprivileged programs can still perform pointer arithmetic. This
can be abused to execute speculatively out-of-bounds loads without restrictions
and thus extract contents of kernel memory.
Fix this by rejecting unprivileged programs that attempt any pointer arithmetic
on unprotected pointer types. The two affected ones are pointer to ctx as well
as pointer to map. Field access to a modified ctx' pointer is rejected at a
later point in time in the verifier, and 7c6967326267 ("bpf: Permit map_ptr
arithmetic with opcode add and offset 0") only relevant for root-only use cases.
Risk of unprivileged program breakage is considered very low.
Fixes: 7c6967326267 ("bpf: Permit map_ptr arithmetic with opcode add and offset 0")
Fixes: b2157399cc98 ("bpf: prevent out-of-bounds speculation")
Signed-off-by: Piotr Krysiuk <piotras@gmail.com>
Co-developed-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
The following sequence of commands:
register_ftrace_direct(ip, addr1);
modify_ftrace_direct(ip, addr1, addr2);
unregister_ftrace_direct(ip, addr2);
will cause the kernel to warn:
[ 30.179191] WARNING: CPU: 2 PID: 1961 at kernel/trace/ftrace.c:5223 unregister_ftrace_direct+0x130/0x150
[ 30.180556] CPU: 2 PID: 1961 Comm: test_progs W O 5.12.0-rc2-00378-g86bc10a0a711-dirty #3246
[ 30.182453] RIP: 0010:unregister_ftrace_direct+0x130/0x150
When modify_ftrace_direct() changes the addr from old to new it should update
the addr stored in ftrace_direct_funcs. Otherwise the final
unregister_ftrace_direct() won't find the address and will cause the splat.
Fixes: 0567d6809182 ("ftrace: Add modify_ftrace_direct()")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: https://lore.kernel.org/bpf/20210316195815.34714-1-alexei.starovoitov@gmail.com
Change the Spidernet network driver from supported to
maintained, add the linuxppc-dev ML, and add myself as
a 'maintainer'.
Cc: Ishizaki Kou <kou.ishizaki@toshiba.co.jp>
Signed-off-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simon Horman says:
====================
Fixes for nfp pre_tunnel code
Louis Peens says:
The following set of patches fixes up a few bugs in the pre_tun
decap code paths which has been hiding for a while.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
pre_tun_rule flows does not follow the usual add-flow path, instead
they are used to update the pre_tun table on the firmware. This means
that if the mask-id gets allocated here the firmware will never see the
"NFP_FL_META_FLAG_MANAGE_MASK" flag for the specific mask id, which
triggers the allocation on the firmware side. This leads to the firmware
mask being corrupted and causing all sorts of strange behaviour.
Fixes: f12725d98cbe ("nfp: flower: offload pre-tunnel rules")
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Differentiate between ipv4 and ipv6 flows when configuring the pre_tunnel
table to prevent them trampling each other in the table.
Fixes: 783461604f7e ("nfp: flower: update flow merge code to support IPv6 tunnels")
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are some pre_tunnel flows combinations which are incorrectly being
offloaded without proper support, fix these.
- Matching on MPLS is not supported for pre_tun.
- Match on IPv4/IPv6 layer must be present.
- Destination MAC address must match pre_tun.dev MAC
Fixes: 120ffd84a9ec ("nfp: flower: verify pre-tunnel rules")
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Merely enabling compile-testing should not enable additional code.
To fix this, restrict the automatic enabling of BCM4908_ENET to
ARCH_BCM4908.
Fixes: 4feffeadbcb2e5b1 ("net: broadcom: bcm4908enet: add BCM4908 controller driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
When openvswitch conntrack offload with act_ct action. The first rule
do conntrack in the act_ct in tc subsystem. And miss the next rule in
the tc and fallback to the ovs datapath but miss set post_ct flag
which will lead the ct_state_key with -trk flag.
Fixes: 7baf2429a1a9 ("net/sched: cls_flower add CT_FLAGS_INVALID flag support")
Signed-off-by: wenxu <wenxu@ucloud.cn>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEK3kIWJt9yTYMP3ehqclaivrt76kFAmBQZbwTHG1rbEBwZW5n
dXRyb25peC5kZQAKCRCpyVqK+u3vqbaXCACCWiOBmQDBUCrybeI/t5UVpAW1s1FR
cRxF5NqqJJrE0YNmS0OJf58o96OoqBQsjtTeynk4a8CtjnQ73TrLJXCxvAN0/QON
xhNzb6NHVsAPRxnsh9Ov0sHYYL4aCzYOw9Y9PcII4pYmlYJkA9HUl2DwjWfUGWtM
rg/V8gGk8HNIKZcYySixNDWdycI4UpMFWkfJcWMmcWfQM+SlQD28ZZRajHKVOVL+
dtPVFFxgjZCaOaB1FGCZ1bgeNTYUlkmj4O19tPHxc73oqjBDjMw4g/QouMtabaXu
27aFoKanC8pTOQ8WHGbqtj44r2uTcgAsmSmZ3BHvlct4C6PSO2gd0P73
=gQmn
-----END PGP SIGNATURE-----
Merge tag 'linux-can-fixes-for-5.12-20210316' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2021-03-16
this is a pull request of 11 patches for net/master.
The first patch is by Martin Willi and fixes the deletion of network
name spaces with physical CAN interfaces in them.
The next two patches are by me an fix the ISOTP protocol, to ensure
that unused flags in classical CAN frames are properly initialized to
zero.
Stephane Grosjean contributes a patch for the pcan_usb_fd driver,
which add MODULE_SUPPORTED_DEVICE lines for two supported devices.
Angelo Dureghello's patch for the flexcan driver fixes a potential div
by zero, if the bitrate is not set during driver probe.
Jimmy Assarsson's patch for the kvaser_pciefd disables bus load
reporting in the device, if it was previously enabled by the vendor's
out of tree drier. A patch for the kvaser_usb adds support for a new
device, by adding the appropriate USB product ID.
Tong Zhang contributes two patches for the c_can driver. First a
use-after-free in the c_can_pci driver is fixed, in the second patch
the runtime PM for the c_can_pci is fixed by moving the runtime PM
enable/disable from the core driver to the platform driver.
The last two patches are by Torin Cooper-Bennun for the m_can driver.
First a extraneous msg loss warning is removed then he fixes the
RX-path, which might be blocked by errors.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The ena.rst documentation referred to end_start_xmit() when it should refer
to ena_start_xmit(). Fix the typo.
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Acked-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Build currently fails with -Werror=maybe-uninitialized set:
net/wireless/nl80211.c: In function '__cfg80211_wdev_from_attrs':
net/wireless/nl80211.c:124:44: error: 'wdev_id' may be used
uninitialized in this function [-Werror=maybe-uninitialized]
Easy fix is to just initialize wdev_id to 0, since it's value doesn't
otherwise matter unless have_wdev_id is true.
Fixes: a05829a7222e ("cfg80211: avoid holding the RTNL when calling the driver")
CC: Johannes Berg <johannes@sipsolutions.net>
CC: "David S. Miller" <davem@davemloft.net>
CC: Jakub Kicinski <kuba@kernel.org>
CC: linux-wireless@vger.kernel.org
CC: netdev@vger.kernel.org
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Link: https://lore.kernel.org/r/20210312163651.1398207-1-jarod@redhat.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Even if the first channel from sband channel list is invalid
or disabled mac80211 ends up choosing it as the default channel
for monitor interfaces, making them not usable.
Fix this by assigning the first available valid or enabled
channel instead.
Signed-off-by: Karthikeyan Kathirvel <kathirve@codeaurora.org>
Link: https://lore.kernel.org/r/1615440547-7661-1-git-send-email-kathirve@codeaurora.org
[reword commit message, comment, code cleanups]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We have all the network interfaces marked as netns-local
since the only reasonable thing to do right now is to set
a whole device, including all netdevs, into a different
network namespace. For this reason, we also have our own
way of changing the network namespace.
Unfortunately, the RTNL locking changes broke this, and
it now results in many RTNL assertions. The trivial fix
for those (just hold RTNL for the changes) however leads
to deadlocks in the cfg80211 netdev notifier.
Since we only need the wiphy, and that's still protected
by the RTNL, add a new NL80211_FLAG_NO_WIPHY_MTX flag to
the nl80211 ops and use it to _not_ take the wiphy mutex
but only the RTNL. This way, the notifier does all the
work necessary during unregistration/registration of the
netdevs from the old and in the new namespace.
Reported-by: Sid Hayn <sidhayn@gmail.com>
Fixes: a05829a7222e ("cfg80211: avoid holding the RTNL when calling the driver")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20210310215839.eadf7c43781b.I5fc6cf6676f800ab8008e03bbea9c3349b02d804@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
crypto_aead_encrypt returns <0 on error, so if these calls are not checked,
execution may continue with failed encrypts. It also seems that these two
crypto_aead_encrypt calls are the only instances in the codebase that are
not checked for errors.
Signed-off-by: Daniel Phan <daniel.phan36@gmail.com>
Link: https://lore.kernel.org/r/20210309204137.823268-1-daniel.phan36@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We observed some Cisco APs sending the following HE Operation IE in
associate response:
ff 0a 24 f4 3f 00 01 fc ff 00 00 00
Its HE operation parameter is 0x003ff4, so the expected total length is
7 which does not match the actual length = 10. This causes association
failing with "HE AP is missing HE Capability/operation."
According to P802.11ax_D4 Table9-94, HE operation is extensible, and
according to 802.11-2016 10.27.8, STA should discard the part beyond
the maximum length and parse the truncated element.
Allow HE operation element to be longer than expected to handle this
case and future extensions.
Fixes: e4d005b80dee ("mac80211: refactor extended element parsing")
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Yen-lin Lai <yenlinlai@chromium.org>
Link: https://lore.kernel.org/r/20210223051926.2653301-1-yenlinlai@chromium.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Coverity reported the strange "if (~...)" condition that's
always true. It suggested that ! was intended instead of ~,
but upon further analysis I'm convinced that what really was
intended was a comparison to 0xff/0xffff (in HT/VHT cases
respectively), since this indicates that all of the rates
are enabled.
Change the comparison accordingly.
I'm guessing this never really mattered because a reset to
not having a rate mask is basically equivalent to having a
mask that enables all rates.
Reported-by: Colin Ian King <colin.king@canonical.com>
Fixes: 2ffbe6d33366 ("mac80211: fix and optimize MCS mask handling")
Fixes: b119ad6e726c ("mac80211: add rate mask logic for vht rates")
Reviewed-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210212112213.36b38078f569.I8546a20c80bc1669058eb453e213630b846e107b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For M_CAN peripherals, m_can_rx_handler() was called with quota = 1,
which caused any error handling to block RX from taking place until
the next time the IRQ handler is called. This had been observed to
cause RX to be blocked indefinitely in some cases.
This is fixed by calling m_can_rx_handler with a sensibly high quota.
Fixes: f524f829b75a ("can: m_can: Create a m_can platform framework")
Link: https://lore.kernel.org/r/20210303144350.4093750-1-torin@maxiluxsystems.com
Suggested-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Torin Cooper-Bennun <torin@maxiluxsystems.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Message loss from RX FIFO 0 is already handled in
m_can_handle_lost_msg(), with netdev output included.
Removing this warning also improves driver performance under heavy
load, where m_can_do_rx_poll() may be called many times before this
interrupt is cleared, causing this message to be output many
times (thanks Mariusz Madej for this report).
Fixes: e0d1f4816f2a ("can: m_can: add Bosch M_CAN controller support")
Link: https://lore.kernel.org/r/20210303103151.3760532-1-torin@maxiluxsystems.com
Reported-by: Mariusz Madej <mariusz.madej@xtrack.com>
Signed-off-by: Torin Cooper-Bennun <torin@maxiluxsystems.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Currently doing modprobe c_can_pci will make the kernel complain:
Unbalanced pm_runtime_enable!
this is caused by pm_runtime_enable() called before pm is initialized.
This fix is similar to 227619c3ff7c, move those pm_enable/disable code
to c_can_platform.
Fixes: 4cdd34b26826 ("can: c_can: Add runtime PM support to Bosch C_CAN/D_CAN controller")
Link: http://lore.kernel.org/r/20210302025542.987600-1-ztong0001@gmail.com
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
There is a UAF in c_can_pci_remove(). dev is released by
free_c_can_dev() and is used by pci_iounmap(pdev, priv->base) later.
To fix this issue, save the mmio address before releasing dev.
Fixes: 5b92da0443c2 ("c_can_pci: generic module for C_CAN/D_CAN on PCI")
Link: https://lore.kernel.org/r/20210301024512.539039-1-ztong0001@gmail.com
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Under certain circumstances, when switching from Kvaser's linuxcan driver
(kvpciefd) to the SocketCAN driver (kvaser_pciefd), the bus load reporting
is not disabled.
This is flooding the kernel log with prints like:
[3485.574677] kvaser_pciefd 0000:02:00.0: Received unexpected packet type 0x00000009
Always put the controller in the expected state, instead of assuming that
bus load reporting is inactive.
Note: If bus load reporting is enabled when the driver is loaded, you will
still get a number of bus load packages (and printouts), before it is
disabled.
Fixes: 26ad340e582d ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices")
Link: https://lore.kernel.org/r/20210309091724.31262-1-jimmyassarsson@gmail.com
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
For cases when flexcan is built-in, bitrate is still not set at
registering. So flexcan_chip_freeze() generates:
[ 1.860000] *** ZERO DIVIDE *** FORMAT=4
[ 1.860000] Current process id is 1
[ 1.860000] BAD KERNEL TRAP: 00000000
[ 1.860000] PC: [<402e70c8>] flexcan_chip_freeze+0x1a/0xa8
To allow chip freeze, using an hardcoded timeout when bitrate is still
not set.
Fixes: ec15e27cc890 ("can: flexcan: enable RX FIFO after FRZ/HALT valid")
Link: https://lore.kernel.org/r/20210315231510.650593-1-angelo@kernel-space.org
Signed-off-by: Angelo Dureghello <angelo@kernel-space.org>
[mkl: use if instead of ? operator]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Since the peak_usb driver also supports the CAN-USB interfaces
"PCAN-USB X6" and "PCAN-Chip USB" from PEAK-System GmbH, this patch adds
their names to the list of explicitly supported devices.
Fixes: ea8b65b596d7 ("can: usb: Add support of PCAN-Chip USB stamp module")
Fixes: f00b534ded60 ("can: peak: Add support for PCAN-USB X6 USB interface")
Link: https://lore.kernel.org/r/20210309082128.23125-3-s.grosjean@peak-system.com
Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The previous patch ensures that the TX flags (struct
can_isotp_ll_options::tx_flags) are 0 for classic CAN frames or a user
configured value for CAN-FD frames.
This patch sets the CAN frames flags unconditionally to the ISO-TP TX
flags, so that they are initialized to a proper value. Otherwise when
running "candump -x" on a classical CAN ISO-TP stream shows wrongly
set "B" and "E" flags.
| $ candump any,0:0,#FFFFFFFF -extA
| [...]
| can0 TX B E 713 [8] 2B 0A 0B 0C 0D 0E 0F 00
| can0 TX B E 713 [8] 2C 01 02 03 04 05 06 07
| can0 TX B E 713 [8] 2D 08 09 0A 0B 0C 0D 0E
| can0 TX B E 713 [8] 2E 0F 00 01 02 03 04 05
Fixes: e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol")
Link: https://lore.kernel.org/r/20210218215434.1708249-2-mkl@pengutronix.de
Cc: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
CAN-FD frames have struct canfd_frame::flags, while classic CAN frames
don't.
This patch refuses to set TX flags (struct
can_isotp_ll_options::tx_flags) on non CAN-FD isotp sockets.
Fixes: e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol")
Link: https://lore.kernel.org/r/20210218215434.1708249-2-mkl@pengutronix.de
Cc: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
When a non-initial netns is destroyed, the usual policy is to delete
all virtual network interfaces contained, but move physical interfaces
back to the initial netns. This keeps the physical interface visible
on the system.
CAN devices are somewhat special, as they define rtnl_link_ops even
if they are physical devices. If a CAN interface is moved into a
non-initial netns, destroying that netns lets the interface vanish
instead of moving it back to the initial netns. default_device_exit()
skips CAN interfaces due to having rtnl_link_ops set. Reproducer:
ip netns add foo
ip link set can0 netns foo
ip netns delete foo
WARNING: CPU: 1 PID: 84 at net/core/dev.c:11030 ops_exit_list+0x38/0x60
CPU: 1 PID: 84 Comm: kworker/u4:2 Not tainted 5.10.19 #1
Workqueue: netns cleanup_net
[<c010e700>] (unwind_backtrace) from [<c010a1d8>] (show_stack+0x10/0x14)
[<c010a1d8>] (show_stack) from [<c086dc10>] (dump_stack+0x94/0xa8)
[<c086dc10>] (dump_stack) from [<c086b938>] (__warn+0xb8/0x114)
[<c086b938>] (__warn) from [<c086ba10>] (warn_slowpath_fmt+0x7c/0xac)
[<c086ba10>] (warn_slowpath_fmt) from [<c0629f20>] (ops_exit_list+0x38/0x60)
[<c0629f20>] (ops_exit_list) from [<c062a5c4>] (cleanup_net+0x230/0x380)
[<c062a5c4>] (cleanup_net) from [<c0142c20>] (process_one_work+0x1d8/0x438)
[<c0142c20>] (process_one_work) from [<c0142ee4>] (worker_thread+0x64/0x5a8)
[<c0142ee4>] (worker_thread) from [<c0148a98>] (kthread+0x148/0x14c)
[<c0148a98>] (kthread) from [<c0100148>] (ret_from_fork+0x14/0x2c)
To properly restore physical CAN devices to the initial netns on owning
netns exit, introduce a flag on rtnl_link_ops that can be set by drivers.
For CAN devices setting this flag, default_device_exit() considers them
non-virtual, applying the usual namespace move.
The issue was introduced in the commit mentioned below, as at that time
CAN devices did not have a dellink() operation.
Fixes: e008b5fc8dc7 ("net: Simplfy default_device_exit and improve batching.")
Link: https://lore.kernel.org/r/20210302122423.872326-1-martin@strongswan.org
Signed-off-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Currently, Linux computes the HMAC contained in ADD_ADDR sub-option using
the Address Id and the IP Address, and hardcodes a destination port equal
to zero. This is not ok for ADD_ADDR with port: ensure to account for the
endpoint port when computing the HMAC, in compliance with RFC8684 §3.4.1.
Fixes: 22fb85ffaefb ("mptcp: add port support for ADD_ADDR suboption writing")
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Acked-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
