IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Driver is neither dependent to PCI nor using MFD_CORE.
Replace those dependency and selection by dependency on LPC_ICH.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Since we are depended on LPC_SCH, which selects MFD_CORE,
we don't need to do it ourselves.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Since LPC_SCH provides GPIO functionality, GPIO_SCH should depend on
LPC_SCH to prevent kconfig warning and build errors:
WARNING: unmet direct dependencies detected for LPC_SCH
Depends on [n]: HAS_IOMEM [=y] && PCI [=n]
Selected by [y]:
- GPIO_SCH [=y] && GPIOLIB [=y] && X86 [=y] && (X86 [=y] || COMPILE_TEST [=n]) && ACPI [=y]
and
../drivers/mfd/lpc_sch.c:204:1: warning: data definition has no type or storage class
module_pci_driver(lpc_sch_driver);
^~~~~~~~~~~~~~~~~
../drivers/mfd/lpc_sch.c:204:1: error: type defaults to ‘int’ in declaration of ‘module_pci_driver’ [-Werror=implicit-int]
../drivers/mfd/lpc_sch.c:204:1: warning: parameter names (without types) in function declaration
../drivers/mfd/lpc_sch.c:197:26: warning: ‘lpc_sch_driver’ defined but not used [-Wunused-variable]
static struct pci_driver lpc_sch_driver = {
^~~~~~~~~~~~~~
Fixes: 6c46215d6b62 ("gpio: sch: Hook into ACPI GPE handler to catch GPIO edge events")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Denis Turischev <denis@compulab.co.il>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Like some other Bay and Cherry Trail SoC based devices the Dell Venue
10 Pro 5055 has an embedded-controller which uses ACPI GPIO events to
report events instead of using the standard ACPI EC interface for this.
The EC interrupt is only used to report battery-level changes and
it keeps doing this while the system is suspended, causing the system
to not stay suspended.
Add an ignore-wake quirk for the GPIO pin used by the EC to fix the
spurious wakeups from suspend.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Neither the ACPI description on Intel Minnowboard (v1) platform provides
the required information to establish a generic handling nor the hardware
capable of doing it. According to the data sheet the hardware can generate
SCI events. Therefore, we need to hook from the driver into GPE handler of
the ACPI subsystem in order to catch and report GPIO-related events.
Validated on the Inlel Minnowboard (v1) platform and Intel Galileo Gen 2.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Add the required infrastructure to enable and report edge events
of the pins to the GPIO core. The actual hook-up of the event interrupt
will happen separately.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Co-developed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
cmdline library provides next_arg() helper to traverse over parameters
and their values given in command line. Replace custom approach in the driver
by it.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
At least one module will benefit from using next_arg() helper.
Let's export it for that module and others if they consider it
helpful.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Use the device_get_match_data() helper instead of open coding.
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Realtek MIPS SoCs (platform name Otto) have GPIO controllers with up to
64 GPIOs, divided over two banks. Each bank has a set of registers for
32 GPIOs, with support for edge-triggered interrupts.
Each GPIO bank consists of four 8-bit GPIO ports (ABCD and EFGH). Most
registers pack one bit per GPIO, except for the IMR register, which
packs two bits per GPIO (AB-CD).
Although the byte order is currently assumed to have port A..D at offset
0x0..0x3, this has been observed to be reversed on other, Lexra-based,
SoCs (e.g. RTL8196E/97D/97F).
Interrupt support is disabled for the fallback devicetree-compatible
'realtek,otto-gpio'. This allows for quick support of GPIO banks in
which the byte order would be unknown. In this case, the port ordering
in the IMR registers may not match the reversed order in the other
registers (DCBA, and BA-DC or DC-BA).
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Add a binding description for Realtek's GPIO controller found on several
of their MIPS-based SoCs (codenamed Otto), such as the RTL838x and
RTL839x series of switch SoCs.
A fallback binding 'realtek,otto-gpio' is provided for cases where the
actual port ordering is not known yet, and enabling the interrupt
controller may result in uncaught interrupts.
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Missing since introduced in the driver.
Fixes: 8a68ea00a6 ("gpio: mockup: implement naming the lines")
Signed-off-by: Alexander Dahl <ada@thorsis.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
All other sections are ordered alphabetically so do the same for
gpio-mockup.
Fixes: 0f98dd1b27 ("gpio/mockup: add virtual gpio device")
Signed-off-by: Alexander Dahl <ada@thorsis.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Provide managed variants of bitmap_alloc() and bitmap_zalloc().
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
For better readability and maintenance: order the includes in bitmap
source files alphabetically.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The 'extern' keyword doesn't have any benefits for functions in header
files. Remove it.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Fix a few typos and some punctuation. Also, change CONFIG_OF to
CONFIG_OF_GPIO in one comment.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: linux-gpio@vger.kernel.org
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
[Bartosz: tweaked the commit message]
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Fix several problems in kernel-doc notation in gpio-utils.c.
gpio-utils.c:37: warning: Incorrect use of kernel-doc format: * gpiotools_request_line() - request gpio lines in a gpiochip
gpio-utils.c:61: warning: expecting prototype for doc(). Prototype was for gpiotools_request_line() instead
gpio-utils.c:265: warning: Excess function parameter 'value' description in 'gpiotools_sets'
gpio-utils.c:1: warning: 'gpiotools_request_lines' not found
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
There is now a GPIO multiplexer, so mention this in the document
about drivers using GPIO as backend.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
First of all one of the parameter missed 'mockup' in its name,
Second, the semantics of the integer pairs depends on the sign
of the base (the first value in the pair).
Update documentation to reflect the real code behaviour.
Fixes: 2fd1abe99e ("Documentation: gpio: add documentation for gpio-mockup")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Since platform_device_unregister() is NULL-aware, we don't need to duplicate
this check. Remove it and fold the rest of the code.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
It's quite spread code to initialize IRQ domain options.
Let's fold it into a simple oneliner.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
When IRQ domain is created for an ACPI case, the name of it becomes unknown-%d
since for now it utilizes of_node member only and doesn't consider fwnode case.
Convert IRQ domain creation code to utilize fwnode instead.
Before/After the change on Intel Galileo Gen 2 with two GPIO (IRQ) controllers:
unknown-1 ==> \_SB.PCI0.GIP0.GPO
unknown-2 ==> \_SB.NIO3
Due to the nature of this change we may also deduplicate the WARN():s
because in either case (DT or ACPI) the fwnode will be set correctly
and %pfw is an equivalent to what the current code prints as a prefix.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
In the ACPI case we may use the firmware node in the similar way
as it's done for OF case. We may use that fwnode for other purposes
in the future.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
The initial value of the OF node based on presence of parent, but
at the same time this operation somehow appeared separately from others
that handle the OF case. On the other hand there is no need to assign
dev->fwnode in the OF case if code properly retrieves fwnode, i.e.
via dev_fwnode() helper.
Amend gpiolib.c and gpiolib-of.c code in order to group OF operations.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
We have (historically) different approaches how we identify the type
of a given fwnode. Let's standardize them across the library code.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Linus Walleij pointed out that ird_domain_add_simple() gained
additional functionality and can't be anymore replaced with
a simple conditional. In preparation to upgrade GPIO library
to use fwnode, introduce irq_domain_create_simple() API which is
functional equivalent to the existing irq_domain_add_simple(),
but takes a pointer to the struct fwnode_handle as a parameter.
While at it, amend documentation to mention irq_domain_create_*()
functions where it makes sense.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Make it so that this #include line is rendered in monospace, like other
code blocks.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmBXj1oACgkQ8vlZVpUN
gaNnAwgAqZJ0S/Hctexs+v+DNvuyMxsA84pB/9KYlK2zgbBOyK5Iftxjqxb9Sb6j
6XKQOIaP2EXYJ0MDWW/fDMUHatlJvXUp+A9kLTiOLMDaRXbobQzb5jlGg9ZB/pBj
TzISrR4widiqJbVT2RFpO9O7B75BQqlpqFNfkF/yJ9CU/ozAw9x+voPcZK7q8/Sh
+DeQCARvgfx1ZipHGTYKjJdujA0qGcDfboYJpgId/gA5Zi76tx4NlbeXAM2QmRfh
zAd1NzFhqf7JmKDAWDdUeRnrDHcje9FLcAxo7Quq7YWxRKFsOCz9LTxazL2UIoa2
HvGpMD23qmISCLUyyrfnrpGPj/mD2w==
=xcuH
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Miscellaneous ext4 bug fixes for v5.12"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: initialize ret to suppress smatch warning
ext4: stop inode update before return
ext4: fix rename whiteout with fast commit
ext4: fix timer use-after-free on failed mount
ext4: fix potential error in ext4_do_update_inode
ext4: do not try to set xattr into ea_inode if value is empty
ext4: do not iput inode under running transaction in ext4_rename()
ext4: find old entry again if failed to rename whiteout
ext4: fix error handling in ext4_end_enable_verity()
ext4: fix bh ref count on error paths
fs/ext4: fix integer overflow in s_log_groups_per_flex
ext4: add reclaim checks to xattr code
ext4: shrink race window in ext4_should_retry_alloc()
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmBXahgQHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgppMVEAC+Kn8AmNPbV7/AX3jfZYEh1UwyPetpJQ2m
FiWkXnuG85kM3UD12S5RYEYkHxzSob2d1yfZ+kL1TAkVJaz3FVoUU9ms0guXfCNb
l8k5fgK2zlegCyBIsPnouR/zV4Y/GJjf+tY0/c1e2Ovfl1zjCW486PvwjJzjMy8b
rXUi3MMKB3JPltML152qi9S1lJJuIHMB22ZUdTiyX+u4RtCzvGHGZmlpb4sw73RF
IRN7qBDYy5Pth+PCUBrhveIPmF/QSKhPHTarczIkgqSw/fSslsgEdBe88fxBDfbf
+WIaYifwqDongT4wkboXFUPTkSUlA+TbvnMW6dRZJTJvRspKz0SV4l+xC/QvT231
JqHqvRk2FkdVlpfXBvdVz94jLFiBJSl02QqTseQGbRdFY4BvxqkC15z4HkPdldJ8
QM2+6ZfzVWbzZkssgK42kTuDq9EX5Ks/+rOkIM/z2L5D00sbeeCVGCeNXf3uS7So
s7pskeTOLoXSvTpwzzEBEpJ6ebU698B1hx++Hjuy95Zifs2holkHXu36wvYmWFDm
CmxZ48waSQJq/emjbOSYfJthKc/TmaUzocsnMvSA5eoCmP445OUQJJTfifEj50if
/k0+XTi1DOrYHyy8R7a8T7xXDJIlMGY7fZyvmzopfRlJHnaHkeBfpbSaPCZXoAiJ
8T/mkYohAw==
=xaEf
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.12-2021-03-21' of git://git.kernel.dk/linux-block
Pull io_uring followup fixes from Jens Axboe:
- The SIGSTOP change from Eric, so we properly ignore that for
PF_IO_WORKER threads.
- Disallow sending signals to PF_IO_WORKER threads in general, we're
not interested in having them funnel back to the io_uring owning
task.
- Stable fix from Stefan, ensuring we properly break links for short
send/sendmsg recv/recvmsg if MSG_WAITALL is set.
- Catch and loop when needing to run task_work before a PF_IO_WORKER
threads goes to sleep.
* tag 'io_uring-5.12-2021-03-21' of git://git.kernel.dk/linux-block:
io_uring: call req_set_fail_links() on short send[msg]()/recv[msg]() with MSG_WAITALL
io-wq: ensure task is running before processing task_work
signal: don't allow STOP on PF_IO_WORKER threads
signal: don't allow sending any signals to PF_IO_WORKER threads
Here are some small staging and IIO driver fixes for 5.12-rc4.
They include:
- MAINTAINERS changes for the move of the staging mailing list
- comedi driver fixes to get request_irq() to work correctly
- counter driver fixes for reported issues with iio devices
- tiny iio driver fixes for reported issues.
All of these have been in linux-next with no reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYFc7qw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynn+QCffC5Zjkde07XiyTwksdVu6FaV2M4AnimVDEIG
u14uiz3TU1bd81gn1YLi
=47FR
-----END PGP SIGNATURE-----
Merge tag 'staging-5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging and IIO driver fixes from Greg KH:
"Some small staging and IIO driver fixes:
- MAINTAINERS changes for the move of the staging mailing list
- comedi driver fixes to get request_irq() to work correctly
- counter driver fixes for reported issues with iio devices
- tiny iio driver fixes for reported issues.
All of these have been in linux-next with no reported problems"
* tag 'staging-5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: vt665x: fix alignment constraints
staging: comedi: cb_pcidas64: fix request_irq() warn
staging: comedi: cb_pcidas: fix request_irq() warn
MAINTAINERS: move the staging subsystem to lists.linux.dev
MAINTAINERS: move some real subsystems off of the staging mailing list
iio: gyro: mpu3050: Fix error handling in mpu3050_trigger_handler
iio: hid-sensor-temperature: Fix issues of timestamp channel
iio: hid-sensor-humidity: Fix alignment issue of timestamp channel
counter: stm32-timer-cnt: fix ceiling miss-alignment with reload register
counter: stm32-timer-cnt: fix ceiling write max value
counter: stm32-timer-cnt: Report count function when SLAVE_MODE_DISABLED
iio: adc: ab8500-gpadc: Fix off by 10 to 3
iio:adc:stm32-adc: Add HAS_IOMEM dependency
iio: adis16400: Fix an error code in adis16400_initial_setup()
iio: adc: adi-axi-adc: add proper Kconfig dependencies
iio: adc: ad7949: fix wrong ADC result due to incorrect bit mask
iio: hid-sensor-prox: Fix scale not correct issue
iio:adc:qcom-spmi-vadc: add default scale to LR_MUX2_BAT_ID channel
Here are some small Thunderbolt and USB driver fixes for some reported
issues:
- thunderbolt fixes for minor problems
- typec fixes for power issues
- usb-storage quirk addition
- usbip bugfix
- dwc3 bugfix when stopping transfers
- cdnsp bugfix for isoc transfers
- gadget use-after-free fix
All have been in linux-next this week with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYFc8ag8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykrHwCfdSigXZ7IFgVcN+428ml0Ko/yG4AAn2Hkv2or
+ayuj/5GM/9I6Bt8aryk
=zzfw
-----END PGP SIGNATURE-----
Merge tag 'usb-5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB and Thunderbolt driver fixes from Greg KH:
"Here are some small Thunderbolt and USB driver fixes for some reported
issues:
- thunderbolt fixes for minor problems
- typec fixes for power issues
- usb-storage quirk addition
- usbip bugfix
- dwc3 bugfix when stopping transfers
- cdnsp bugfix for isoc transfers
- gadget use-after-free fix
All have been in linux-next this week with no reported issues"
* tag 'usb-5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: typec: tcpm: Skip sink_cap query only when VDM sm is busy
usb: dwc3: gadget: Prevent EP queuing while stopping transfers
usb: typec: tcpm: Invoke power_supply_changed for tcpm-source-psy-
usb: typec: Remove vdo[3] part of tps6598x_rx_identity_reg struct
usb-storage: Add quirk to defeat Kindle's automatic unload
usb: gadget: configfs: Fix KASAN use-after-free
usbip: Fix incorrect double assignment to udc->ud.tcp_rx
usb: cdnsp: Fixes incorrect value in ISOC TRB
thunderbolt: Increase runtime PM reference count on DP tunnel discovery
thunderbolt: Initialize HopID IDAs in tb_switch_alloc()
plus a DocBook fix.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=IkEX
-----END PGP SIGNATURE-----
Merge tag 'irq-urgent-2021-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Ingo Molnar:
"A change to robustify force-threaded IRQ handlers to always disable
interrupts, plus a DocBook fix.
The force-threaded IRQ handler change has been accelerated from the
normal schedule of such a change to keep the bad pattern/workaround of
spin_lock_irqsave() in handlers or IRQF_NOTHREAD as a kludge from
spreading"
* tag 'irq-urgent-2021-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq: Disable interrupts for force threaded handlers
genirq/irq_sim: Fix typos in kernel doc (fnode -> fwnode)
- another missing RT_PROP table related fix, to ensure that the efivarfs
pseudo filesystem fails gracefully if variable services are unsupported,
- use the correct alignment for literal EFI GUIDs,
- fix a use after unmap issue in the memreserve code
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=la6v
-----END PGP SIGNATURE-----
Merge tag 'efi-urgent-2021-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI fixes from Ingo Molnar:
- another missing RT_PROP table related fix, to ensure that the
efivarfs pseudo filesystem fails gracefully if variable services
are unsupported
- use the correct alignment for literal EFI GUIDs
- fix a use after unmap issue in the memreserve code
* tag 'efi-urgent-2021-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi: use 32-bit alignment for efi_guid_t literals
firmware/efi: Fix a use after bug in efi_mem_reserve_persistent
efivars: respect EFI_UNSUPPORTED return from firmware
devicetree-node lookups.
- Restore the IRQ2 ignore logic
- Fix get_nr_restart_syscall() to return the correct restart syscall number.
Split in a 4-patches set to avoid kABI breakage when backporting to dead
kernels.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmBXJu0ACgkQEsHwGGHe
VUrCkQ/9Et5W76HMQfHccluks2i2yNXgd7nROhIt0iMS1Ph86AWYJZmMZ2dbaqW8
nORU20ziHme+9PScmcJb2LdJxIRDtYNs1J811IYeKNpvj8KHXtV2VYCVG9UcL21E
FmUlZf5oINiDMzu3q4SuqHw9t7X6RCItolQIRmQHDXqPraFhBxji2VOFXDIg+qhf
a4sBz6UfxA4a/b7d/KxHxNvuQE5Cluc9gninhtaYh1b7OQZJX4+vTa3W5V4kK0df
ohOH5pnJp9V7qH2CmB3UcGWJTxHeLbm4E0KYkyasnKG9M0KmIvJ6jNARlRAo3hAF
hn9D4xLtsnIWjtO6xEVdF7kSizkYZRPay5kX88quvlSa0FkkPnsUvFtW79Yi3ZNy
vL2NAu2biqNQyo7ZWVffJns2DrJwYZ6KOGA6oUBwTUBfieF9KMdDew8IXRUMYNdO
LzW87Irf9eZj9c+b7Rtr0VofmKgRYwy1Lo8eVT+VGkV+nOTOB9rlAll2lYBq3aNA
W6ei0S5/1zaRF5aU6Qmnap4eb1X/tp845q6CPYa9kIsZwVyGFOa7iLeYcNn9qHdB
G6RW6CUh97A7wwxUYt5VGUscjYV2V9Ycv9HvIwrG/T7aezWnhI9ODtggzDgCnbls
og6N/+heLZ9G/DyxAEmHuazV2ItDPJq69gag/POHhXJaSUGbdbA=
=WfC4
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
"The freshest pile of shiny x86 fixes for 5.12:
- Add the arch-specific mapping between physical and logical CPUs to
fix devicetree-node lookups
- Restore the IRQ2 ignore logic
- Fix get_nr_restart_syscall() to return the correct restart syscall
number. Split in a 4-patches set to avoid kABI breakage when
backporting to dead kernels"
* tag 'x86_urgent_for_v5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/apic/of: Fix CPU devicetree-node lookups
x86/ioapic: Ignore IRQ2 again
x86: Introduce restart_block->arch_data to remove TS_COMPAT_RESTART
x86: Introduce TS_COMPAT_RESTART to fix get_nr_restart_syscall()
x86: Move TS_COMPAT back to asm/thread_info.h
kernel, fs: Introduce and use set_restart_fn() and arch_set_restart_data()
Fix a possible stack corruption and subsequent DLPAR failure in the rpadlpar_io
PCI hotplug driver.
Two build fixes for uncommon configurations.
Thanks to Christophe Leroy, Tyrel Datwyler.
-----BEGIN PGP SIGNATURE-----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=SHvi
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.12-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix a possible stack corruption and subsequent DLPAR failure in the
rpadlpar_io PCI hotplug driver
- Two build fixes for uncommon configurations
Thanks to Christophe Leroy and Tyrel Datwyler.
* tag 'powerpc-5.12-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
PCI: rpadlpar: Fix potential drc_name corruption in store functions
powerpc: Force inlining of cpu_has_feature() to avoid build failure
powerpc/vdso32: Add missing _restgpr_31_x to fix build failure
Without that it's not safe to use them in a linked combination with
others.
Now combinations like IORING_OP_SENDMSG followed by IORING_OP_SPLICE
should be possible.
We already handle short reads and writes for the following opcodes:
- IORING_OP_READV
- IORING_OP_READ_FIXED
- IORING_OP_READ
- IORING_OP_WRITEV
- IORING_OP_WRITE_FIXED
- IORING_OP_WRITE
- IORING_OP_SPLICE
- IORING_OP_TEE
Now we have it for these as well:
- IORING_OP_SENDMSG
- IORING_OP_SEND
- IORING_OP_RECVMSG
- IORING_OP_RECV
For IORING_OP_RECVMSG we also check for the MSG_TRUNC and MSG_CTRUNC
flags in order to call req_set_fail_links().
There might be applications arround depending on the behavior
that even short send[msg]()/recv[msg]() retuns continue an
IOSQE_IO_LINK chain.
It's very unlikely that such applications pass in MSG_WAITALL,
which is only defined in 'man 2 recvmsg', but not in 'man 2 sendmsg'.
It's expected that the low level sock_sendmsg() call just ignores
MSG_WAITALL, as MSG_ZEROCOPY is also ignored without explicitly set
SO_ZEROCOPY.
We also expect the caller to know about the implicit truncation to
MAX_RW_COUNT, which we don't detect.
cc: netdev@vger.kernel.org
Link: https://lore.kernel.org/r/c4e1a4cc0d905314f4d5dc567e65a7b09621aab3.1615908477.git.metze@samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Mark the current task as running if we need to run task_work from the
io-wq threads as part of work handling. If that is the case, then return
as such so that the caller can appropriately loop back and reset if it
was part of a going-to-sleep flush.
Fixes: 3bfe610669 ("io-wq: fork worker threads from original task")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Just like we don't allow normal signals to IO threads, don't deliver a
STOP to a task that has PF_IO_WORKER set. The IO threads don't take
signals in general, and have no means of flushing out a stop either.
Longer term, we may want to look into allowing stop of these threads,
as it relates to eg process freezing. For now, this prevents a spin
issue if a SIGSTOP is delivered to the parent task.
Reported-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
They don't take signals individually, and even if they share signals with
the parent task, don't allow them to be delivered through the worker
thread. Linux does allow this kind of behavior for regular threads, but
it's really a compatability thing that we need not care about for the IO
threads.
Reported-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch adds rename whiteout support in fast commits. Note that the
whiteout object that gets created is actually char device. Which
imples, the function ext4_inode_journal_mode(struct inode *inode)
would return "JOURNAL_DATA" for this inode. This has a consequence in
fast commit code that it will make creation of the whiteout object a
fast-commit ineligible behavior and thus will fall back to full
commits. With this patch, this can be observed by running fast commits
with rename whiteout and seeing the stats generated by ext4_fc_stats
tracepoint as follows:
ext4_fc_stats: dev 254:32 fc ineligible reasons:
XATTR:0, CROSS_RENAME:0, JOURNAL_FLAG_CHANGE:0, NO_MEM:0, SWAP_BOOT:0,
RESIZE:0, RENAME_DIR:0, FALLOC_RANGE:0, INODE_JOURNAL_DATA:16;
num_commits:6, ineligible: 6, numblks: 3
So in short, this patch guarantees that in case of rename whiteout, we
fall back to full commits.
Amir mentioned that instead of creating a new whiteout object for
every rename, we can create a static whiteout object with irrelevant
nlink. That will make fast commits to not fall back to full
commit. But until this happens, this patch will ensure correctness by
falling back to full commits.
Fixes: 8016e29f43 ("ext4: fast commit recovery path")
Cc: stable@kernel.org
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20210316221921.1124955-1-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When filesystem mount fails because of corrupted filesystem we first
cancel the s_err_report timer reminding fs errors every day and only
then we flush s_error_work. However s_error_work may report another fs
error and re-arm timer thus resulting in timer use-after-free. Fix the
problem by first flushing the work and only after that canceling the
s_err_report timer.
Reported-by: syzbot+628472a2aac693ab0fcd@syzkaller.appspotmail.com
Fixes: 2d01ddc866 ("ext4: save error info to sb through journal if available")
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210315165906.2175-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If set_large_file = 1 and errors occur in ext4_handle_dirty_metadata(),
the error code will be overridden, go to out_brelse to avoid this
situation.
Signed-off-by: Shijie Luo <luoshijie1@huawei.com>
Link: https://lore.kernel.org/r/20210312065051.36314-1-luoshijie1@huawei.com
Cc: stable@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Syzbot report a warning that ext4 may create an empty ea_inode if set
an empty extent attribute to a file on the file system which is no free
blocks left.
WARNING: CPU: 6 PID: 10667 at fs/ext4/xattr.c:1640 ext4_xattr_set_entry+0x10f8/0x1114 fs/ext4/xattr.c:1640
...
Call trace:
ext4_xattr_set_entry+0x10f8/0x1114 fs/ext4/xattr.c:1640
ext4_xattr_block_set+0x1d0/0x1b1c fs/ext4/xattr.c:1942
ext4_xattr_set_handle+0x8a0/0xf1c fs/ext4/xattr.c:2390
ext4_xattr_set+0x120/0x1f0 fs/ext4/xattr.c:2491
ext4_xattr_trusted_set+0x48/0x5c fs/ext4/xattr_trusted.c:37
__vfs_setxattr+0x208/0x23c fs/xattr.c:177
...
Now, ext4 try to store extent attribute into an external inode if
ext4_xattr_block_set() return -ENOSPC, but for the case of store an
empty extent attribute, store the extent entry into the extent
attribute block is enough. A simple reproduce below.
fallocate test.img -l 1M
mkfs.ext4 -F -b 2048 -O ea_inode test.img
mount test.img /mnt
dd if=/dev/zero of=/mnt/foo bs=2048 count=500
setfattr -n "user.test" /mnt/foo
Reported-by: syzbot+98b881fdd8ebf45ab4ae@syzkaller.appspotmail.com
Fixes: 9c6e7853c5 ("ext4: reserve space for xattr entries/names")
Cc: stable@kernel.org
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Link: https://lore.kernel.org/r/20210305120508.298465-1-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In ext4_rename(), when RENAME_WHITEOUT failed to add new entry into
directory, it ends up dropping new created whiteout inode under the
running transaction. After commit <9b88f9fb0d2> ("ext4: Do not iput inode
under running transaction"), we follow the assumptions that evict() does
not get called from a transaction context but in ext4_rename() it breaks
this suggestion. Although it's not a real problem, better to obey it, so
this patch add inode to orphan list and stop transaction before final
iput().
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Link: https://lore.kernel.org/r/20210303131703.330415-2-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
