IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Merge series from Daniel Beer <daniel.beer@igorinstitute.com>:
This pair of patches fixes two issues which crept in while revising the
original submission, at a time when I no longer had access to test
hardware.
The fixes here have been tested and verified on hardware.
The val is defined as unsigned int type, if(val<0) is redundant, so
delete it.
sound/soc/codecs/idt821034.c:449 idt821034_kctrl_gain_put() warn: unsigned 'val' is never less than zero.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3947
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Acked-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20230206075518.84169-1-jiapeng.chong@linux.alibaba.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck reports
sound/soc/codecs/aw88395/aw88395_lib.c:789:6: error: Uninitialized variable: cur_scene_id [uninitvar]
if (cur_scene_id == 0) {
^
Passing a garbage value to aw_dev_parse_data_by_sec_type_v1() will cause a crash
when the value is used as an array index. This check assumes cur_scene_id is
initialized to 0, so initialize it to 0.
Fixes: 4345865b00 ("ASoC: codecs: ACF bin parsing and check library file for aw88395")
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20230205015733.1721009-1-trix@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Seems like properties parsing and reading was copy-pasted,
so "everest,interrupt-src" and "everest,interrupt-clk" are saved into
the es8326->jack_pol variable. This might lead to wrong settings
being saved into the reg 57 (ES8326_HP_DET).
Fix this by using proper variables while reading properties.
Signed-off-by: Alexey Firago <a.firago@yadro.com>
Reviewed-by: Yang Yingliang <yangyingliang@huawei.com
Link: https://lore.kernel.org/r/20230204195106.46539-1-a.firago@yadro.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In tas5805m_refresh, we switch pages to update the DSP volume control,
but we need to switch back to page 0 before trying to alter the
soft-mute control. This latter page-switch was missing.
Fixes: ec45268467 ("ASoC: add support for TAS5805M digital amplifier")
Signed-off-by: Daniel Beer <daniel.beer@igorinstitute.com>
Link: https://lore.kernel.org/r/1fea38a71ea6ab0225d19ab28d1fa12828d762d0.1675497326.git.daniel.beer@igorinstitute.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There's some setup we need to do in order to get the DSP initialized,
and this can't be done until a bit-clock is ready. In an earlier version
of this driver, this work was done in a DAPM callback.
The DAPM callback doesn't guarantee that the bit-clock is running, so
the work was moved instead to the trigger callback. Unfortunately this
callback runs in atomic context, and the setup code needs to do I2C
transactions.
Here we use a work_struct to kick off the setup in a thread instead.
Fixes: ec45268467 ("ASoC: add support for TAS5805M digital amplifier")
Signed-off-by: Daniel Beer <daniel.beer@igorinstitute.com>
Link: https://lore.kernel.org/r/85d8ba405cb009a7a3249b556dc8f3bdb1754fdf.1675497326.git.daniel.beer@igorinstitute.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A bit higher volume of changes than wished, but each change is
relatively small and the fix targets are mostly device-specific,
so those should be safe as a late stage merge.
The most significant LoC is about the memalloc helper fix, which
is applied only to Xen PV. The other major parts are ASoC Intel
SOF and AVS fixes that are scattered as various small code
changes. The rest are device-specific fixes and quirks for HD-
and USB-audio, FireWire and ASoC AMD / HDMI.
-----BEGIN PGP SIGNATURE-----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=/+Up
-----END PGP SIGNATURE-----
Merge tag 'sound-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A bit higher volume of changes than wished, but each change is
relatively small and the fix targets are mostly device-specific, so
those should be safe as a late stage merge.
The most significant LoC is about the memalloc helper fix, which is
applied only to Xen PV. The other major parts are ASoC Intel SOF and
AVS fixes that are scattered as various small code changes. The rest
are device-specific fixes and quirks for HD- and USB-audio, FireWire
and ASoC AMD / HDMI"
* tag 'sound-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (30 commits)
ALSA: firewire-motu: fix unreleased lock warning in hwdep device
ALSA: memalloc: Workaround for Xen PV
ASoC: cs42l56: fix DT probe
ASoC: codecs: wsa883x: correct playback min/max rates
ALSA: hda/realtek: Add Acer Predator PH315-54
ASoC: amd: yc: Add Xiaomi Redmi Book Pro 15 2022 into DMI table
ALSA: hda: Do not unset preset when cleaning up codec
ASoC: SOF: sof-audio: prepare_widgets: Check swidget for NULL on sink failure
ASoC: hdmi-codec: zero clear HDMI pdata
ASoC: SOF: ipc4-mtrace: prevent underflow in sof_ipc4_priority_mask_dfs_write()
ASoC: Intel: sof_ssp_amp: always set dpcm_capture for amplifiers
ASoC: Intel: sof_nau8825: always set dpcm_capture for amplifiers
ASoC: Intel: sof_cs42l42: always set dpcm_capture for amplifiers
ASoC: Intel: sof_rt5682: always set dpcm_capture for amplifiers
ALSA: hda/via: Avoid potential array out-of-bound in add_secret_dac_path()
ALSA: usb-audio: Add FIXED_RATE quirk for JBL Quantum610 Wireless
ALSA: hda/realtek: fix mute/micmute LEDs, speaker don't work for a HP platform
ASoC: SOF: keep prepare/unprepare widgets in sink path
ASoC: SOF: sof-audio: skip prepare/unprepare if swidget is NULL
ASoC: SOF: sof-audio: unprepare when swidget->use_count > 0
...
Both the DAC and ADC have digital gain controls available
for their mixers, which go from -31 to 0db by step of 1db.
Signed-off-by: Christophe Branchereau <cbranchereau@gmail.com>
Link: https://lore.kernel.org/r/20230122210703.2552384-1-cbranchereau@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Stefan Binding <sbinding@opensource.cirrus.com>:
The CS42L42 has a SoundWire interface for control and audio. This
chain of patches adds support for this.
Patches #1 .. #5 split out various changes to the existing code that
are needed for adding Soundwire. These are mostly around clocking and
supporting the separate probe and enumeration stages in SoundWire.
Patches #6 .. #8 actually adds the SoundWire handling.
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
struct snd_soc_dai need to have info for playback/capture,
but it is using "playback/capture_xxx" or "tx/tx_xxx" or array.
This kind of random definition is very difficult to read.
This patch-set add helper functions and each driver use it.
And cleanup the definition.
Merge series from wangweidong.a@awinic.com:
The Awinic AW88395 is an I2S/TDM input, high efficiency
digital Smart K audio amplifier with an integrated 10.25V
smart boost converter.
Add a DT schema for describing Awinic AW88395 audio amplifiers. They are
controlled using I2C
Merge series from Herve Codina <herve.codina@bootlin.com>:
The Renesas IDT821034 codec is four channel PCM codec with on-chip
filters and programmable gain setting. It also provides SLIC
(Subscriber Line Interface Circuit) signals as GPIOs.
Since clock stop causes bus reset on Intel controllers, we need
to wait for the debounce interval on resume, to ensure all the
interrupt status registers are set correctly.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230127165111.3010960-9-sbinding@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
idle_bias_on was set because cs42l42 has a "VMID" type pseudo-midrail
supply (named FILT+), and these typically take a long time to charge.
But the driver never enabled pm_runtime so it would never have powered-
down the cs42l42 anyway.
In fact, FILT+ can charge to operating voltage within 12.5 milliseconds
of enabling HP or ADC. This time is already covered by the startup
delay of the HP/ADC.
The datasheet warning about FILT+ taking up to 1 second to charge only
applies in the special cases that either the PLL is started or
DETECT_MODE set to non-zero while both HP and ADC are off. The driver
never does either of these.
Removing idle_bias_on allows the Soundwire host controller to suspend
if there isn't a snd_soc_jack handler registered.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230127165111.3010960-8-sbinding@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This adds support for using CS42L42 as a SoundWire device.
SoundWire-specifics are kept separate from the I2S implementation as
much as possible, aiming to limit the risk of breaking the I2C+I2S
support.
There are some important differences in the silicon behaviour between
I2S and SoundWire mode that are reflected in the implementation:
- ASP (I2S) most not be used in SoundWire mode because the two interfaces
share pins.
- The SoundWire capture (record) port only supports 1 channel. It does
not have left-to-right duplication like the ASP.
- DP2 can only be prepared if the HP has powered-up. DP1 can only be
prepared if the ADC has powered-up. (This ordering restriction does
not exist for ASPs.) The SoundWire core port-prepare step is
triggered by the DAI-link prepare(). This happens before the
codec DAI prepare() or the DAPM sequence so these cannot be used
to enable HP/ADC. Instead the HP/ADC enable/disable are done during
the port_prep callback.
- The SRCs are an integral part of the audio chain but in silicon their
power control is linked to the ASP. There is no equivalent power link
to SoundWire DPs so the driver must take "manual" control of SRC power.
- The SoundWire control registers occupy the lower part of the SoundWire
address space so cs42l42 registers are offset by 0x8000 (non-paged) in
SoundWire mode.
- Register addresses are 8-bit paged in I2C mode but 16-bit unpaged in
SoundWire.
- Special procedures are needed on register read/writes to (a) ensure
that the previous internal bus transaction has completed, and
(b) handle delayed read results, when the read value could not be
returned within the SoundWire read command.
There are also some differences in driver implementation between I2S
and SoundWire operation:
- CS42L42 I2S does not runtime_suspend, but runtime_suspend/resume support
has been added into the driver in SoundWire mode as the most convenient
way to power-up the bus manager and to handle the unattach_request
condition, though the CS42L42 chip does not itself suspend or resume.
- Intel SoundWire host controllers have a low-power clock-stop mode that
requires resetting all peripherals when resuming. This means that the
interrupt registers will be reset in between the interrupt being
generated and the interrupt being handled, and since the interrupt
status is debounced, these values may not be accurate immediately,
and may cause spurious unplug events before settling.
- As in I2S mode, the PLL is only used while audio is active because
of clocking quirks in the silicon. For SoundWire the cs42l42_pll_config()
is deferred until the DAI prepare(), to allow the cs42l42_bus_config()
callback to set the SCLK.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230127165111.3010960-7-sbinding@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Export functions that will be needed by a SoundWire module.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230127165111.3010960-6-sbinding@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Setup of the ASP (audio serial port) was being done as a side-effect of
cs42l42_pll_config() and forces a restriction on the ratio of sample_rate
to bit_clock that is invalid for Soundwire.
Move the ASP setup into a dedicated function.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230127165111.3010960-5-sbinding@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The chosen clocking configuration must give an internal MCLK (MCLKint)
that is an integer multiple of the sample rate.
On I2S each of the supported bit clock frequencies can only be generated
from one sample rate group (either the 44100 or the 48000) so the code
could use only the bitclock to look up a PLL config.
The relationship between sample rate and bitclock frequency is more
complex on Soundwire and so it is possible to set a frame shape to
generate a bitclock from the "wrong" group. For example 2*147 with a
48000 sample rate would give a bitclock of 14112000 which on I2S
could only be derived from a 44100 sample rate.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230127165111.3010960-4-sbinding@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The SOFT_RESET_REBOOT register is needed to recover CS42L42 state after
a Soundwire bus reset.
This is required to be set whenever there is severe/hard bus reset.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230127165111.3010960-3-sbinding@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Awinic AW88395 is an I2S/TDM input, high efficiency
digital Smart K audio amplifier with an integrated 10.25V
smart boost convert
Signed-off-by: Nick Li <liweilei@awinic.com>
Signed-off-by: Bruce zhao <zhaolei@awinic.com>
Signed-off-by: Weidong Wang <wangweidong.a@awinic.com>
Link: https://lore.kernel.org/r/20230113055301.189541-5-wangweidong.a@awinic.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Awinic AW88395 is an I2S/TDM input, high efficiency
digital Smart K audio amplifier with an integrated 10.25V
smart boost convert
Signed-off-by: Nick Li <liweilei@awinic.com>
Signed-off-by: Bruce zhao <zhaolei@awinic.com>
Signed-off-by: Ben Yi <yijiangtao@awinic.com>
Signed-off-by: Weidong Wang <wangweidong.a@awinic.com>
Link: https://lore.kernel.org/r/20230113055301.189541-4-wangweidong.a@awinic.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Awinic AW88395 is an I2S/TDM input, high efficiency
digital Smart K audio amplifier with an integrated 10.25V
smart boost convert
Signed-off-by: Nick Li <liweilei@awinic.com>
Signed-off-by: Bruce zhao <zhaolei@awinic.com>
Signed-off-by: Weidong Wang <wangweidong.a@awinic.com>
Link: https://lore.kernel.org/r/20230113055301.189541-3-wangweidong.a@awinic.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Awinic AW88395 is an I2S/TDM input, high efficiency
digital Smart K audio amplifier with an integrated 10.25V
smart boost convert
Signed-off-by: Nick Li <liweilei@awinic.com>
Signed-off-by: Bruce zhao <zhaolei@awinic.com>
Signed-off-by: Weidong Wang <wangweidong.a@awinic.com>
Link: https://lore.kernel.org/r/20230113055301.189541-2-wangweidong.a@awinic.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Renesas IDT821034 codec is four channel PCM codec with on-chip
filters and programmable gain setting.
It also provides SLIC (Subscriber Line Interface Circuit) signals as
GPIOs.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20230126085137.375814-3-herve.codina@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Set the reserved bit 7 in the ANALOG_CTRL_REG for the TAS5720A-Q1 device,
when probing.
The datasheet mentions that the bit should be 1 during reset/powerup.
The device did not initialize before setting this value to 1. So, this
could be a quirk of this device. Or it could be a quirk with the board on
which it was tested.
That is why this patch is separate from the patch that adds support for the
TAS5720A-Q1 device.
Signed-off-by: Steffen Aschbacher <steffen.aschbacher@stihl.de>
Signed-off-by: Alexandru Ardelean <alex@shruggie.ro>
Link: https://lore.kernel.org/r/20230128082744.41849-3-alex@shruggie.ro
Signed-off-by: Mark Brown <broonie@kernel.org>
This change adds support the TAS5720A-Q1 audio codec, in the same driver as
tas5720.
Functionally, this driver is pretty similar to it's TAS5720x variant.
The first 3 registers are the same, so the main control and device
identification can happen with these registers.
The next registers differ.
This variant offers control (in the registers) for 2 speakers, which is
implemented here (in a basic manner).
Signed-off-by: Steffen Aschbacher <steffen.aschbacher@stihl.de>
Signed-off-by: Alexandru Ardelean <alex@shruggie.ro>
Link: https://lore.kernel.org/r/20230128082744.41849-2-alex@shruggie.ro
Signed-off-by: Mark Brown <broonie@kernel.org>
This is to be re-used in tas5720_mute() (which is part of the dai_ops) and
also in the tas5720_fault_check_work() hook.
The benefit here isn't too great (now).
It's only when we add support for a new device with a slightly different
regmap that this becomes more useful.
Signed-off-by: Alexandru Ardelean <alex@shruggie.ro>
Link: https://lore.kernel.org/r/20230128082744.41849-1-alex@shruggie.ro
Signed-off-by: Mark Brown <broonie@kernel.org>
I'm not exactly clear on what strange workflow causes people to do it,
but clearly occasionally some files end up being committed as executable
even though they clearly aren't.
This is a reprise of commit 90fda63fa1 ("treewide: fix up files
incorrectly marked executable"), just with a different set of files (but
with the same trivial shell scripting).
So apparently we need to re-do this every five years or so, and Joe
needs to just keep reminding me to do so ;)
Reported-by: Joe Perches <joe@perches.com>
Fixes: 523375c943 ("drm/vmwgfx: Port vmwgfx to arm64")
Fixes: 5c43993777 ("ASoC: codecs: add support for ES8326")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
While looking through legacy platform data users, I noticed that
the DT probing never uses data from the DT properties, as the
platform_data structure gets overwritten directly after it
is initialized.
There have never been any boards defining the platform_data in
the mainline kernel either, so this driver so far only worked
with patched kernels or with the default values.
For the benefit of possible downstream users, fix the DT probe
by no longer overwriting the data.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230126162203.2986339-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Correct reversed values used in min/max rates, leading to incorrect
playback constraints.
Cc: <stable@vger.kernel.org>
Fixes: 43b8c7dc85 ("ASoC: codecs: add wsa883x amplifier support")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230124123049.285395-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The shutdown GPIO is active low (SD_N), but this depends on actual board
layout. Linux drivers should only care about logical state, where high
(1) means shutdown and low (0) means do not shutdown.
Invert the GPIO to match logical value while preserving backwards DTB
compatibility. It is not possible to detect whether ACTIVE_HIGH flag in
DTB is because it is an old DTB (using incorrect flag) or it is a new
DTB with a correct hardware pin polarity description. Therefore the
solution prioritizes backwards compatibility while relying on relevant
DTS being upstreamed.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230102114152.297305-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Francesco Dolcini <francesco@dolcini.it>:
Add support for BTL (Bridge Tied Load) configuration to NAU8822 audio codec,
since this requires adding a new property to the binding convert it from
txt to yaml first.
The Device_ID registers already tell us if a device supports the SDCA
specification or not, in hindsight we never needed a property when the
information is reported by both hardware and ACPI.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221118025807.534863-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
commit dcc2c012c7 ("ASoC: Fix gpiolib dependencies") removed a
series of unnecessary dependencies on GPIOLIB when the gpio was
optional.
A similar simplification seems valid for nau8315, so remove the
dependency as well. This will avoid the following warning
WARNING: unmet direct dependencies detected for SND_SOC_NAU8315
Depends on [n]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] &&
GPIOLIB [=n]
Selected by [y]:
- SND_SOC_INTEL_SOF_NAU8825_MACH [=y] && SOUND [=y] && !UML &&
SND [=y] && SND_SOC [=y] && SND_SOC_INTEL_MACH [=y] &&
(SND_SOC_SOF_HDA_LINK [=y] || SND_SOC_SOF_BAYTRAIL [=n]) &&
I2C [=y] && ACPI [=y] && SND_HDA_CODEC_HDMI [=y] &&
SND_SOC_SOF_HDA_AUDIO_CODEC [=y] && (MFD_INTEL_LPSS [=n] ||
COMPILE_TEST [=y])
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Ajye Huang <ajye_huang@compal.corp-partner.google.com>
Link: https://lore.kernel.org/r/20230108114351.539786-1-ajye_huang@compal.corp-partner.google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Allow configuring the two loudspeaker outputs as a
single Bridge Tied Load output getting higher output power.
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/r/20230104140412.35575-4-francesco@dolcini.it
Signed-off-by: Mark Brown <broonie@kernel.org>
Restore volume after charge pump and PGA activation to ensure
that volume settings are correctly applied when re-enabling codec
from SND_SOC_BIAS_OFF state.
CLASS_W, CHARGE_PUMP and POWER_MANAGEMENT_2 register configuration
affect how the volume register are applied and must be configured first.
Fixes: a91eb199e4 ("ASoC: Initial WM8904 CODEC driver")
Link: https://lore.kernel.org/all/c7864c35-738c-a867-a6a6-ddf9f98df7e7@gmail.com/
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221223080247.7258-1-francesco@dolcini.it
Signed-off-by: Mark Brown <broonie@kernel.org>
RT9120 uses PM runtime autosuspend to decrease the frequently on/off
spent time. This exists one case, when pcm is closed and dev PM is
waiting for autosuspend time expired to enter runtime suspend state.
At the mean time, system is going to enter suspend, dev PM runtime
suspend won't be called. It makes the rt9120 suspend consumption
current not as expected.
This patch can fix the rt9120 dev PM issue during runtime autosuspend
and system suspend by binding dev PM runtime and ASoC component PM.
Fixes: 80b949f332 ("ASoC: rt9120: Use pm_runtime and regcache to optimize 'pwdnn' logic")
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://lore.kernel.org/r/1672301033-3675-1-git-send-email-u0084500@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Uwe Kleine-König <u.kleine-koenig@pengutronix.de>:
Hello,
this patch series removes all platform remove functions that only return
zero below sound/soc. There is no reason to have these, as the only
caller is platform core code doing:
if (drv->remove) {
int ret = drv->remove(dev);
...
}
(in platform_remove()) and so having no remove function is both
equivalent and simpler.
LOUT output can produce either single-ended stereo signals, or mono
differential signal. Some applications are wired to use LOUT in mono
differential mode. Allow to configure it via device property.
Signed-off-by: Ondrej Jirman <megi@xff.cz>
Signed-off-by: Jarrah Gosbell <kernel@undef.tools>
Link: https://lore.kernel.org/r/20221209105621.39237-1-kernel@undef.tools
Signed-off-by: Mark Brown <broonie@kernel.org>
The wm8940 provides the chip ID information via I2C. In this
patch this information is read and if not matching expected
value, the probe function is aborted.
This prevents from using (i.e. inserting) other wm89* modules
which use the same I2C bus address.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221216094624.3849278-3-lukma@denx.de
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch enables support for internal wm8940's PLL and proper
divider to set proper value for 256x fs clock.
This approach is more flexible and replaces hardcoded clock
values and makes the codec work with the simple-card driver.
Card drivers calling set_pll() and set_clkdiv() directly are
unaffected.
For the reference - code in this commit is based on:
51b2bb3f25
("ASoC: wm8974: configure pll and mclk divider automatically")
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221216094624.3849278-2-lukma@denx.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The lack of platform data in the contemporary Linux
shall not be the reason to display warnings to the
kernel logs.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221216094624.3849278-1-lukma@denx.de
Signed-off-by: Mark Brown <broonie@kernel.org>
This adds the DAI mono mode support and set the frame width to 32
Signed-off-by: Piotr Wojtaszczyk <piotr.wojtaszczyk@timesys.com>
Tested-by: David Rau <David.Rau.opensource@dm.renesas.com>
Signed-off-by: David Rau <David.Rau.opensource@dm.renesas.com>
Link: https://lore.kernel.org/r/20221214044058.6289-1-David.Rau.opensource@dm.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
lochnagar_of_match is used unconditionally, so COMPILE_TEST builds
without OF warn:
sound/soc/codecs/lochnagar-sc.c:247:34: error: ‘lochnagar_of_match’ defined but not used [-Werror=unused-const-variable=]
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221215134337.77944-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
For some reason rt5670_i2c_probe() does a pm_runtime_put() at the end
of a successful probe. But it has never done a pm_runtime_get() leading
to the following error being logged into dmesg:
rt5670 i2c-10EC5640:00: Runtime PM usage count underflow!
Fix this by removing the unnecessary pm_runtime_put().
Fixes: 64e89e5f55 ("ASoC: rt5670: Add runtime PM support")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20221213123319.11285-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix this by dropping wm8994->accdet_lock while calling
cancel_delayed_work_sync(&wm8994->mic_work) in wm1811_jackdet_irq().
Fixes: c0cc3f1665 ("ASoC: wm8994: Allow a delay between jack insertion and microphone detect")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221209091657.1183-1-m.szyprowski@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The function wcd_clsh_set_buck_mode() is defined in the wcd-clsh-v2.c
file, but not called elsewhere, so remove this unused function.
sound/soc/codecs/wcd-clsh-v2.c:133:20: warning: unused function 'wcd_clsh_enable_status'.
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3348
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Link: https://lore.kernel.org/r/20221205073507.36071-1-jiapeng.chong@linux.alibaba.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Don't populate the read-only arrays capture_reg_H and capture_reg_L
on the stack but instead make them static const. Also makes the
object code a little smaller.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20221202171450.1815346-1-colin.i.king@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Don't populate the read-only array minCode_param on the stack but
instead make it static const. Also makes the object code a little
smaller.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20221202170644.1814720-1-colin.i.king@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Mark Brown <broonie@kernel.org>:
The recently added pcm-test selftest has pointed out that systems with
the tda998x driver end up advertising that they support capture when in
reality as far as I can see the tda998x devices are transmit only. The
DAIs registered through hdmi-codec are bidirectional, meaning that for
I2S systems when combined with a typical bidrectional CPU DAI the
overall capability of the PCM is bidirectional. In most cases the I2S
links will clock OK but no useful audio will be returned which isn't so
bad but we should still not advertise the useless capability, and some
systems may notice problems for example due to pinmux management.
This is happening due to the hdmi-codec helpers not providing any
mechanism for indicating unidirectional audio so add one and use it in
the tda998x driver. It is likely other hdmi-codec users are also
affected but I don't have those systems to hand.
Mark Brown (2):
ASoC: hdmi-codec: Allow playback and capture to be disabled
drm: tda99x: Don't advertise non-existent capture support
drivers/gpu/drm/i2c/tda998x_drv.c | 2 ++
include/sound/hdmi-codec.h | 4 ++++
sound/soc/codecs/hdmi-codec.c | 30 +++++++++++++++++++++++++-----
3 files changed, 31 insertions(+), 5 deletions(-)
base-commit: f0c4d9fc9c
--
2.30.2
Currently the hdmi-codec driver always registers both playback and capture
capabilities but for most systems there's no actual capture capability,
usually HDMI is transmit only. Provide platform data which allows the users
to indicate what is supported so that we don't end up advertising things
to userspace that we can't actually support.
In order to avoid breaking existing users the flags in platform data are
a bit awkward and specify what should be disabled rather than doing the
perhaps more expected thing and defaulting to not supporting capture.
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20221130184644.464820-2-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The OMTP pin define headsets can be mis-detected as line out
instead of OMTP, causing obvious issues with audio quality.
This patch is to put increased resistances within
the device at a suitable point.
To solve this issue better, the new mechanism setup
ground switches with conditional delay control
and these allow for more stabile detection process
to operate as intended. This conditional delay control
will not impact the hardware process
but use extra system resource.
This commit improves control of ground switches in the AAD logic.
Signed-off-by: David Rau <david.rau.zg@renesas.com>
Link: https://lore.kernel.org/r/20221121050744.2278-1-david.rau.zg@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The pm_runtime_enable will increase power disable depth. Thus
a pairing decrement is needed on the error handling path to
keep it balanced according to context. We fix it by going to
err_pm instead of err_clk.
Fixes:f086ba9d5389c ("ASoC: pcm512x: Support mastering BCLK/LRCLK using the PLL")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20220928160402.126140-1-zhangqilong3@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We found an corner case in RT5640 codec driver which schedules jack work
after system suspend as IRQ was enabled. Due to this, hitting the error
as register access happening after suspend as jack worker thread getting
scheduled in irq handler. The patch disables the irq during the suspend
to prevent the corner case happening.
Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Reported-by: Mohan Kumar D <mkumard@nvidia.com>
Link: https://lore.kernel.org/r/20221128070825.91215-1-oder_chiou@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For 8kHz and 16kHz sample rates and certain PCLK values
the codec can be programmed to operate in exact integer
mode. If available, use it to achieve the exact sample rate.
Signed-off-by: Pavel Dobias <dobias@2n.com>
Link: https://lore.kernel.org/r/20221123153818.24650-1-dobias@2n.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The conversion from hw_params to SoundWire config is pretty
standard as such most of the conversion can be handled by the new
snd_sdw_params_to_config helper function.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221123165432.594972-9-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The conversion from hw_params to SoundWire config is pretty
standard as such most of the conversion can be handled by the new
snd_sdw_params_to_config helper function.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221123165432.594972-8-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The conversion from hw_params to SoundWire config is pretty
standard as such most of the conversion can be handled by the new
snd_sdw_params_to_config helper function.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221123165432.594972-7-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The conversion from hw_params to SoundWire config is pretty
standard as such most of the conversion can be handled by the new
snd_sdw_params_to_config helper function.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221123165432.594972-6-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The conversion from hw_params to SoundWire config is pretty
standard as such most of the conversion can be handled by the new
snd_sdw_params_to_config helper function.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221123165432.594972-5-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The conversion from hw_params to SoundWire config is pretty
standard as such most of the conversion can be handled by the new
snd_sdw_params_to_config helper function.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221123165432.594972-4-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The conversion from hw_params to SoundWire config is pretty
standard as such most of the conversion can be handled by the new
snd_sdw_params_to_config helper function.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221123165432.594972-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The conversion from hw_params to SoundWire config is pretty
standard as such most of the conversion can be handled by the new
snd_sdw_params_to_config helper function.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221123165432.594972-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ADAU1372 contains 24bit ADCs and DACs. Allow the driver to use
its native mode which uses the same settings as the current 32 bit
mode.
Signed-off-by: Maarten Zanders <maarten.zanders@mind.be>
Link: https://lore.kernel.org/r/20221028152626.109603-3-maarten.zanders@mind.be
Signed-off-by: Mark Brown <broonie@kernel.org>
The DAPM control for PGAx uses the PGA mute bit for
power management. This bit is active high but is set to
non-inverted (ie when powering, it will mute).
The ALSA control "PGA x Capture Switch" uses the active
high PGA_ENx bit, but is set to inverted. So when
enabling this switch, the PGA gets disabled.
To correct the behaviour, invert both these bits.
Signed-off-by: Maarten Zanders <maarten.zanders@mind.be>
Link: https://lore.kernel.org/r/20221028152626.109603-4-maarten.zanders@mind.be
Signed-off-by: Mark Brown <broonie@kernel.org>
"mclk" is retrieved from the configuration and assigned to adau1372->clk.
However adau1372->mclk (==NULL) is used for clk_prepare_enable() and
clk_disable_unprepare() which don't have any effect.
Remove .clk from struct adau1372 and use .mclk throughout.
This change ensures that the input clock is switched on/off when the
bias level is changed.
Signed-off-by: Maarten Zanders <maarten.zanders@mind.be>
Link: https://lore.kernel.org/r/20221028152626.109603-2-maarten.zanders@mind.be
Signed-off-by: Mark Brown <broonie@kernel.org>
The table in the datasheet actually shows the volume values in the wrong
order, with the two -3dB values being reversed. This appears to have
caused the lower of the two values to be used in the driver when the
higher should have been, correct this mixup.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221125162348.1288005-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
Use EXPORT_SYMBOL_NS_GPL() instead of EXPORT_SYMBOL_GPL() and patch the
three drivers that use cs_dsp to add the MODULE_IMPORT_NS().
To make the namespace more specific the KConfig symbol for cs_dsp is
changed from CS_DSP to FW_CS_DSP.
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
Writing a firmware control should be returning 1 if the control value
changed, so these two patches add that.
Though this is an ALSA requirement it is also useful for non-ALSA clients
of cs_dsp to know if the control value changed, so the main handling is
implemented in cs_dsp. TLV controls are specifically an ALSA thing so they
are handled specially in wm_adsp.
Simon Trimmer (2):
firmware: cs_dsp: cs_dsp_coeff_write_ctrl() should report changed
ASoC: wm_adsp: Return whether changed when writing controls
drivers/firmware/cirrus/cs_dsp.c | 17 ++++++++++++-----
sound/soc/codecs/wm_adsp.c | 27 ++++++++++++++++++---------
2 files changed, 30 insertions(+), 14 deletions(-)
--
2.30.2
Move all the exports into a namespace.
This also adds the MODULE_IMPORT_NS to the 3 drivers that use the
exported functions.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221124134556.3343784-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Qualify the KConfig symbol for cs_dsp by adding a FW_ prefix so that
it is more explicit what is being referred to. This is preparation for
using the symbol to namespace the exports.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221124134556.3343784-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20221118224540.619276-604-uwe@kleine-koenig.org
Reviewed-by: Matt Flax <flatmax@flatmax.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20221118224540.619276-603-uwe@kleine-koenig.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20221118224540.619276-605-uwe@kleine-koenig.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20221118224540.619276-602-uwe@kleine-koenig.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Functions that update cs_dsp controls need to handle return codes that
indicate whether the control value changed. A return code of 1 indicates
a change, 0 indicates no-change and a negative value is an error
condition.
Acked controls implicitly change value when written so a successful
write shall always report that the value changed.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221123165811.3014472-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some HALO-based codecs need some additional custom setup in the
pre_run stage of cs_dsp. Implement the callback in wm_adsp to call
an optional codec driver callback.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221109165331.29332-11-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch is to rasie up internal clock during jack detection.
The fast clock will accelerate charge and discharge effect.
So this mechanism will make jack detection more robust.
Signed-off-by: David Lin <CTLIN0@nuvoton.com>
Link: https://lore.kernel.org/r/20221122073855.43024-1-CTLIN0@nuvoton.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As the devm_kcalloc may return NULL pointer,
it should be better to check the return value
in order to avoid NULL poineter dereference.
Fixes: 349dd23931 ("ASoC: max98373: don't access volatile registers in bias level off")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20221116082508.17418-1-jiasheng@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Due to the hardware behavior, it takes some time for CBJ detection/impedance sensing/de-bounce.
The ClockStop_NotFinished flag will be raised until these functions are completed.
In ClockStopMode0 mode case, the SdW controller might check this flag from D3 to D0 when the
jack detection interrupt happened.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20221116090318.5017-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
DMIC Paths into LPASS digital codec can go via tx-macro or va-macro codec, add
support to tx-macro path as va-macro path is already supported.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20221115065430.4126-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix build errors when GPIOLIB is not set/enabled:
../sound/soc/codecs/wsa883x.c: In function 'wsa883x_probe':
../sound/soc/codecs/wsa883x.c:1394:25: error: implicit declaration of function 'devm_gpiod_get_optional'; did you mean 'devm_regulator_get_optional'? [-Werror=implicit-function-declaration]
wsa883x->sd_n = devm_gpiod_get_optional(&pdev->dev, "powerdown",
../sound/soc/codecs/wsa883x.c:1395:49: error: 'GPIOD_FLAGS_BIT_NONEXCLUSIVE' undeclared (first use in this function)
GPIOD_FLAGS_BIT_NONEXCLUSIVE);
../sound/soc/codecs/wsa883x.c:1414:9: error: implicit declaration of function 'gpiod_direction_output'; did you mean 'gpio_direction_output'? [-Werror=implicit-function-declaration]
gpiod_direction_output(wsa883x->sd_n, 1);
Fixes: 43b8c7dc85 ("ASoC: codecs: add wsa883x amplifier support")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Banajit Goswami <bgoswami@quicinc.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: alsa-devel@alsa-project.org
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20221108001829.5100-1-rdunlap@infradead.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The shutdown GPIO is active low (SD_N), but this depends on actual board
layout. Linux drivers should only care about logical state, where high
(1) means shutdown and low (0) means do not shutdown.
Invert the GPIO to match logical value.
Fixes: 43b8c7dc85 ("ASoC: codecs: add wsa883x amplifier support")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20221110133512.478831-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
There are some Dell SKUs that need to set the parameters of the
crossover filter (biquad). Each amplifier connects to one tweeter
speaker and one woofer speaker. We should control HPF/LPF to output the
proper frequency for the different speakers. If the codec driver got
the BQ parameters from the device property, it will apply these
parameters to the hardware.
If we have several instances of WSA macro, each one of them should
register clock with unique name, so parse clock-output-names for this.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221103195341.174972-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Since commit bf2aebccdd ("ASoC: sgtl5000: Fix noise on shutdown/remove"),
the device power control registers are reset when the driver is
removed/shutdown.
This is an issue when the device is configured to use the PLL clock. The
device will stop responding if it is still configured to use the PLL
clock but the PLL clock is powered down.
When rebooting linux, the probe function will show:
sgtl5000 0-000a: Error reading chip id -11
Make sure that the CHIP_CLK_CTRL is reset to its default value before
powering down the device.
Fixes: bf2aebccdd ("ASoC: sgtl5000: Fix noise on shutdown/remove")
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20221110190612.1341469-1-detlev.casanova@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:
Goal of the series is to drop any usage of the internal function.
First, update all users to utilize component->set_jack() and then remove
the relevant EXPORT_SYMBOL_GPL.
DSPCLK_DIV field in WM8962_CLOCKING1 register is used to generate
correct frequency of LRCLK and BCLK. Sometimes the read-only value
can't be updated timely after enabling SYSCLK. This results in wrong
calculation values. Delay is introduced here to wait for newest value
from register. The time of the delay should be at least 500~1000us
according to test.
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221109121354.123958-1-chancel.liu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for the DBVDD and LDO1-IN supplies.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20221102182002.255282-7-nfraprado@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for the DBVDD and LDO1-IN supplies.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20221102182002.255282-6-nfraprado@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With all users utilizing component->set_jack(), there is no need to
export da7219_aad_jack_det() function.
While at it, remove exports from all other functions as well.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221031160227.2352630-8-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Codec driver for da7219 implements jack detect functionality, but does
not integrate it with the framework. Platform component drivers are
accessing the functionality through internal da7219_aad_jack_det()
instead.
Address this by implementing set_jack() for the codec.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221031160227.2352630-2-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Starting with 6.0-rc1 the CPU DAI is not registered and the sound
card is unavailable. Adding legacy_dai_naming causes it to function
properly again.
Fixes: fc34ece41f ("ASoC: Refactor non_legacy_dai_naming flag")
Signed-off-by: Jason Montleon <jmontleo@redhat.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221103144612.4431-2-jmontleo@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Starting with 6.0-rc1 these messages are logged and the sound card
is unavailable. Adding legacy_dai_naming to the rt5514-spi causes
it to function properly again.
[ 16.928454] kbl_r5514_5663_max kbl_r5514_5663_max: ASoC: CPU DAI
spi-PRP0001:00 not registered
[ 16.928561] platform kbl_r5514_5663_max: deferred probe pending
Fixes: fc34ece41f ("ASoC: Refactor non_legacy_dai_naming flag")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=216641
Signed-off-by: Jason Montleon <jmontleo@redhat.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221103144612.4431-1-jmontleo@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
During initialisation DAPM tries to read the state of the MUX
being connected, resulting in this error log:
input-mux: ASoC: error at soc_component_read_no_lock on input-mux: -5
Provide a read function which allows DAPM to read the state of the
MUX.
Signed-off-by: Maarten Zanders <maarten.zanders@mind.be>
Link: https://lore.kernel.org/r/20221028191303.166115-1-maarten.zanders@mind.be
Signed-off-by: Mark Brown <broonie@kernel.org>
Switch the driver from legacy gpio API that is deprecated to the newer
gpiod API that respects line polarities described in ACPI/DT.
The driver still tries to support shared reset lines, by first trying to
allocate the reset GPIO normally, and then non-exclusively, although the
utility of such support is questionable, toggling reset line from one
driver/instance will result in all chips being reset, potentially at an
inopportune moment.
Note that this change depends on commit fbbbcd177a ("gpiolib: of: add
quirk for locating reset lines with legacy bindings") to translate
request for "reset" GPIO to the legacy name "gpio-reset" in case when
proper name is not used.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20221102232004.1721864-3-dmitry.torokhov@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When trying to connect the device with the driver through
device-tree it is not working. The of_device_id is defined in
cs42xx8.c but is not correctly included in cs42xx8-i2c.c.
Move of_device_id table to cs42xx8-i2c.c. Get cs42xx8_driver_data
in cs42xx8_i2c_probe() and pass as argument to cs42xx8_probe(). Move
error check if no driver data found to cs42xx8_i2c_probe().
Signed-off-by: Peter Bergin <peter@berginkonsult.se>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221031203723.168177-1-peter@berginkonsult.se
Signed-off-by: Mark Brown <broonie@kernel.org>
There's a special branch in the set_tdm_slot op for the case of nslots
being 1, but:
(1) That branch can never work (there's a check for tx_mask being
non-zero, later there's another check for it *being* zero; one or
the other always throws -EINVAL).
(2) The intention of the branch seems to be what the general other
branch reduces to in case of nslots being 1.
For those reasons remove the 'nslots being 1' special case.
Fixes: eae9f9ce18 ("ASoC: add tas2780 driver")
Suggested-by: Jos Dehaes <jos.dehaes@gmail.com>
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20221027095800.16094-3-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
There's a special branch in the set_tdm_slot op for the case of nslots
being 1, but:
(1) That branch can never work (there's a check for tx_mask being
non-zero, later there's another check for it *being* zero; one or
the other always throws -EINVAL).
(2) The intention of the branch seems to be what the general other
branch reduces to in case of nslots being 1.
For those reasons remove the 'nslots being 1' special case.
Fixes: 827ed8a0fa ("ASoC: tas2764: Add the driver for the TAS2764")
Suggested-by: Jos Dehaes <jos.dehaes@gmail.com>
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20221027095800.16094-2-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
There's a special branch in the set_tdm_slot op for the case of nslots
being 1, but:
(1) That branch can never work (there's a check for tx_mask being
non-zero, later there's another check for it *being* zero; one or
the other always throws -EINVAL).
(2) The intention of the branch seems to be what the general other
branch reduces to in case of nslots being 1.
For those reasons remove the 'nslots being 1' special case.
Fixes: 1a476abc72 ("tas2770: add tas2770 smart PA kernel driver")
Suggested-by: Jos Dehaes <jos.dehaes@gmail.com>
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20221027095800.16094-1-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
In IPC4 all DSP loadable executable is a 'library' containing modules. The main
or basefw is also a library which contains multiple modules.
IPC4 allows to use loadable libraries to extend the functionality of the booted
basefw.
This series adds support for loading external libraries in case they are needed
by the loaded topology file.
The libraries must be placed to a specific firmware directory (fw_lib_prefix),
which is:
intel/avs-lib|sof-ipc4-lib/ followed by the platform name and in case of
community key use a 'community' directory.
For example for upx-i11 (community key): intel/avs-lib/tgl/community is the
default path.
The name of the library should be the UUID of the module it contains since the
library loading is going to look for the file as <module_UUID>.bin
In case there is a need to bundle multiple modules into single library, symlinks
can be used to point to the file:
module_boundle.bin
<UUID1>.bin -> module_boundle.bin
<UUID2>.bin -> module_boundle.bin
<UUID3>.bin -> module_boundle.bin
But note that in this case all modules will be loaded to the DSP since only the
whole library can be loaded, not individual modules.
We have two helpers with confusing names and different purposes.
Rename bus_get_link() and bus_get_link_at() as bus_get_hlink_by_name()
and bus_get_hlink_by_addr() respectively.
No functionality change
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20221019162115.185917-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Merge series from Siarhei Volkau <lis8215@gmail.com>:
The patchset fixes:
- Line In path stays powered off during capturing or
bypass to mixer.
- incorrectly represented dB values in alsamixer, et al.
- incorrect represented Capture input selector in alsamixer
in Playback tab.
- wrong control selected as Capture Master
There are two spelling mistakes in codec routing description. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20221019071639.1003730-1-colin.i.king@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch updates the pad control and checks the
hardware version to set the different preset settings.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20221019095731.31101-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
These are random cleanup for soc-dpam.c/h.
Basically, these are just cleanup, nothing changed.
Don't populate the read-only array ramp_base on the stack but
instead make it static const. Also makes the object code a
little smaller.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20221018152928.942186-1-colin.i.king@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently snd_soc_dapm_free_widget() is assuming input parameter is
non NULL. Thus, caller need to care about it.
This patch care it at snd_soc_dapm_free_widget().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87wn8yowdr.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Doug Brown <doug@schmorgal.com>:
This series adds devicetree support for the Wolfson WM8961 codec. The
first patch adds a schema, the second patch hooks it up in the code, and
the third patch allows it to be selected in Kconfig.
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:
Two fixes are leading the way - one addresses the incorrect DMA mask
assignment (typo) at driver probe. The other, fixes a potential buffer
overflow when copying data received from firmware to kernel buffer.
However unlikely, the fix should still be there.
Then a range of patches providing the support for:
- AML with rt286 (machine board)
- KBL-R for rt298 (codec)
- KBL-R with rt298 (machine board)
- APL/KBL with da7219 (machine board)
- Addition of all the missing SKL-based PCI ids to core.c
Of the remaining changes, only one stands out - special case is provided
for "unsupported" IPCs. The driver supports a range of platforms,
however, on some generations given IPC may not be supported. Such call
shall not be treated as "invalid" - those are two different scenarios.
Everything else in the patchset is mostly a readability improvement:
spelling fixes and log messages issues, code simplification.
Merge series from Siarhei Volkau <lis8215@gmail.com>:
The patchset fixes:
- Line In path stays powered off during capturing or
bypass to mixer.
- incorrectly represented dB values in alsamixer, et al.
- incorrect represented Capture input selector in alsamixer
in Playback tab.
- wrong control selected as Capture Master
The patchset improves:
- Exposes output stage (post mixer) gain control and makes it new
Master playback gain, DAC gain was the previous master.
However, no Master mute now.
- Exposes all mixer inputs (both Mics, LineIn and DAC) with their
gain controls.
- Exposes microphones widgets: single/differential input, boost.
Known issues:
- Bypass path enablement isn't applied immediately, for make
things going bit clock needs to be triggered for a bit,
e.g. by aplay dummy.wav
It might be a hardware bug, since the bit clock isn't
declared as required for codec operation.
Tested on:
- Ritmix RZX-27 (jz4725b).
- Ritmix RZX-50 (jz4755).
Merge series from Shang XiaoJing <shangxiaojing@huawei.com>:
Use DIV_ROUND_UP() instead of open-coding it, which intents and makes
it more clear what is going on for the casual reviewer.
If CONFIG_SND_SOC_TLV320ADC3XXX=y:
`.exit.text' referenced in section `.data' of sound/soc/codecs/tlv320adc3xxx.o: defined in discarded section `.exit.text' of sound/soc/codecs/tlv320adc3xxx.o
Fix this by wrapping the adc3xxx_i2c_remove() pointer in __exit_p().
Fixes: e9a3b57efd ("ASoC: codec: tlv320adc3xxx: New codec driver")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/3225ba4cfe558d9380155e75385954dd21d4e7eb.1665909132.git.geert@linux-m68k.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Microphone input can be single ended or differential, although
known SoCs with that codec expose MIC1P only.
Also there is 20dB mic boost in the Mic1 path.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Link: https://lore.kernel.org/r/20221016132648.3011729-8-lis8215@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Mixer couples analog input from 4 sources (DAC, Line In, Mic 1,
Mic 2) each input has its own gain & mute controls.
At the moment only DAC is implemented fully and Line In path can be
switched on/off. The patch implements Mic 1 and Mic 2 paths and fully
implements Line In path.
Manual states that these controls (16.6.3.3 Programmable attenuation:
GOi) gain varies from -22.5dB to +6.0dB with 1.5dB step. Also there's
extra values below the minimum, but they behave the same as the minimum
value.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Link: https://lore.kernel.org/r/20221016132648.3011729-7-lis8215@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
At the moment DAC control is used as Master Playback control, this is
incorrect as DAC's output goes to a Mixer.
The Mixer couples analog input from 4 sources (DAC, Line In, Mic 1,
Mic 2) each input has its own gain & mute controls.
Output of the Mixer goes to Output Stage control which is the best suite
for the new Playback Master. However, it doesn't have mute capability.
The patch implements Output Stage control as a new master and renames
old Master to DAC. Rest of mixer inputs will be implemented in the next
patch in the series.
Manual states that Output stage control (16.6.3.5 Programmable output
amplifier: PGAT) gain varies from -33.5dB to +4.5dB, gain step isn't
fixed and has 3 opts.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Link: https://lore.kernel.org/r/20221016132648.3011729-6-lis8215@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
At the moment Capture source selector appears on Playback
tab in the alsamixer and has a senseless name.
Let's fix that.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Link: https://lore.kernel.org/r/20221016132648.3011729-5-lis8215@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Line In Bypass control is used as Master Capture at the moment
this is completely incorrect.
Current control routed to Mixer instead of ADC, thus can't affect
Capture path. ADC control shall be used instead.
ADC volume control parameters are different, so the patch fixes that
as well. Manual says (16.6.3.2 Programmable input attenuation amplifier:
PGATM) that gain varies in range 0dB..22.5dB with 1.5dB step.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Link: https://lore.kernel.org/r/20221016132648.3011729-4-lis8215@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
DAC volume control is the Master Playback Volume at the moment
and it reports wrong levels in alsamixer and other alsa apps.
The patch fixes that, as stated in manual on the jz4725b SoC
(16.6.3.4 Programmable attenuation: GOD) the ctl range varies
from -22.5dB to 0dB with 1.5dB step.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Link: https://lore.kernel.org/r/20221016132648.3011729-3-lis8215@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
KBL-R RVP platforms also use combojack, so we need to enable that
configuration for them.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221010121955.718168-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add optional reset control instead of GPIO to manage codec
PDN pin.
As there is reference counter for reset control, so need
to remove one ak4458_reset in runtime resume to make the
reference counter balance.
Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1665664611-21350-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use DIV_ROUND_UP() instead of open-coding it, which intents and makes it
more clear what is going on for the casual reviewer.
The Coccinelle references Commit e4d8aef214 ("ALSA: usb: Use
DIV_ROUND_UP() instead of open-coding it").
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220927140948.17696-3-shangxiaojing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use DIV_ROUND_UP() instead of open-coding it, which intents and makes it
more clear what is going on for the casual reviewer.
The Coccinelle references Commit e4d8aef214 ("ALSA: usb: Use
DIV_ROUND_UP() instead of open-coding it").
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220927140948.17696-2-shangxiaojing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Allow the WM8961 driver to be enabled independently now that it is
usable with devicetree.
Signed-off-by: Doug Brown <doug@schmorgal.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221003032414.248326-4-doug@schmorgal.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for devicetree to the WM8961 driver so it can be used with
modern DT-based kernels.
Signed-off-by: Doug Brown <doug@schmorgal.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221003032414.248326-3-doug@schmorgal.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In wm8962 driver, the WM8962_ADDITIONAL_CONTROL_4 is used as a volatile
register, but this register mixes a bunch of volatile status bits and a
bunch of non-volatile control bits. The dapm widgets TEMP_HP and
TEMP_SPK leverages the control bits in this register. After the wm8962
probe, the regmap will bet set to cache only mode, then a read error
like below would be triggered when trying to read the initial power
state of the dapm widgets TEMP_HP and TEMP_SPK.
wm8962 0-001a: ASoC: error at soc_component_read_no_lock
on wm8962.0-001a: -16
In order to fix this issue, we add event handler to actually power
up/down these widgets. With this change, we also need to explicitly
power off these widgets in the wm8962 probe since they are enabled
by default.
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
Tested-by: Adam Ford <aford173@gmail.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221010092014.2229246-1-xiaolei.wang@windriver.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Zhang Qilong <zhangqilong3@huawei.com>:
Both the old and new patch have been applied, it will resulted in
redundant calling of pm_runtime_disable when error returns. We Just
revert the old three patches to fix it.
It would be better to keep the pm_runtime enables before the
IRQ and component stuff. Both of those could start triggering
PM runtime events.
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221008140522.134912-1-zhangqilong3@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix build errors when CONFIG_GPIOLIB is not enabled:
../sound/soc/codecs/tlv320adc3xxx.c: In function 'adc3xxx_i2c_probe':
../sound/soc/codecs/tlv320adc3xxx.c:1352:28: error: implicit declaration of function 'devm_gpiod_get'; did you mean 'devm_gpio_free'? [-Werror=implicit-function-declaration]
1352 | adc3xxx->rst_pin = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
../sound/soc/codecs/tlv320adc3xxx.c:1352:57: error: 'GPIOD_OUT_LOW' undeclared (first use in this function); did you mean 'GPIOF_INIT_LOW'?
1352 | adc3xxx->rst_pin = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
CC lib/dynamic_debug.o
../sound/soc/codecs/tlv320adc3xxx.c:1400:9: error: implicit declaration of function 'gpiod_set_value_cansleep'; did you mean 'gpio_set_value_cansleep'? [-Werror=implicit-function-declaration]
1400 | gpiod_set_value_cansleep(adc3xxx->rst_pin, 1);
Fixes: e9a3b57efd ("ASoC: codec: tlv320adc3xxx: New codec driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Ricard Wanderlof <ricardw@axis.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: alsa-devel@alsa-project.org
Link: https://lore.kernel.org/r/20221006235822.30074-1-rdunlap@infradead.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This reverts commit 41a736ac20.
The pm_runtime_disable is redundant when error returns in
wm8997_probe, we just revert the old patch to fix it.
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221010114852.88127-4-zhangqilong3@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This reverts commit 86b46bf1fe.
The pm_runtime_disable is redundant when error returns in
wm5110_probe, we just revert the old patch to fix it.
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221010114852.88127-3-zhangqilong3@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This reverts commit fcbb60820c.
The pm_runtime_disable is redundant when error returns in
wm5102_probe, we just revert the old patch to fix it.
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221010114852.88127-2-zhangqilong3@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Majority of changes at this PR are ASoC drivers (SOF, Intel, AMD,
Mediatek, Qualcomm, TI, Apple Silicon, etc), while we see a few
small fixes in ALSA / ASoC core side, too.
Here are highlights:
Core:
- A new string helper parse_int_array_user() and cleanups with it
- Continued cleanup of memory allocation helpers
- PCM core optimization and hardening
- Continued ASoC core code cleanups
ASoC:
- Improvements to the SOF IPC4 code, especially around trace
- Support for AMD Rembrant DSPs, AMD Pink Sardine ACP 6.2, Apple
Silicon systems, Everest ES8326, Intel Sky Lake and Kaby Lake,
Mediatek MT8186 support, NXP i.MX8ULP DSPs, Qualcomm SC8280XP,
SM8250 and SM8450 and Texas Instruments SRC4392
HD- and USB-audio:
- Cleanups for unification of hda-ext bus
- HD-audio HDMI codec driver cleanups
- Continued endpoint management fixes for USB-audio
- New quirks as usual
-----BEGIN PGP SIGNATURE-----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=EWRA
-----END PGP SIGNATURE-----
Merge tag 'sound-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"The majority of changes are ASoC drivers (SOF, Intel, AMD, Mediatek,
Qualcomm, TI, Apple Silicon, etc), while we see a few small fixes in
ALSA / ASoC core side, too.
Here are highlights:
Core:
- A new string helper parse_int_array_user() and cleanups with it
- Continued cleanup of memory allocation helpers
- PCM core optimization and hardening
- Continued ASoC core code cleanups
ASoC:
- Improvements to the SOF IPC4 code, especially around trace
- Support for AMD Rembrant DSPs, AMD Pink Sardine ACP 6.2, Apple
Silicon systems, Everest ES8326, Intel Sky Lake and Kaby Lake,
Mediatek MT8186 support, NXP i.MX8ULP DSPs, Qualcomm SC8280XP,
SM8250 and SM8450 and Texas Instruments SRC4392
HD- and USB-audio:
- Cleanups for unification of hda-ext bus
- HD-audio HDMI codec driver cleanups
- Continued endpoint management fixes for USB-audio
- New quirks as usual"
* tag 'sound-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (422 commits)
ALSA: hda: Fix position reporting on Poulsbo
ALSA: hda/hdmi: Don't skip notification handling during PM operation
ASoC: rockchip: i2s: use regmap_read_poll_timeout_atomic to poll I2S_CLR
ASoC: dt-bindings: Document audio OF graph dai-tdm-slot-num dai-tdm-slot-width props
ASoC: qcom: fix unmet direct dependencies for SND_SOC_QDSP6
ALSA: usb-audio: Fix potential memory leaks
ALSA: usb-audio: Fix NULL dererence at error path
ASoC: mediatek: mt8192-mt6359: Set the driver name for the card
ALSA: hda/realtek: More robust component matching for CS35L41
ASoC: Intel: sof_rt5682: remove SOF_RT1015_SPEAKER_AMP_100FS flag
ASoC: nau8825: Add TDM support
ASoC: core: clarify the driver name initialization
ASoC: mt6660: Fix PM disable depth imbalance in mt6660_i2c_probe
ASoC: wm5102: Fix PM disable depth imbalance in wm5102_probe
ASoC: wm5110: Fix PM disable depth imbalance in wm5110_probe
ASoC: wm8997: Fix PM disable depth imbalance in wm8997_probe
ASoC: wcd-mbhc-v2: Revert "ASoC: wcd-mbhc-v2: use pm_runtime_resume_and_get()"
ASoC: mediatek: mt8186: Fix spelling mistake "slect" -> "select"
ALSA: hda/realtek: Add quirk for HP Zbook Firefly 14 G9 model
ALSA: asihpi - Remove unused struct hpi_subsys_response
...
fixes all over the tree. Other subsystems depending on this change
have been asked to pull an immutable topic branch for this.
* new driver for Microchip PCI1xxxx switch
* heavy refactoring of the Mellanox BlueField driver
* we prefer async probe in the i801 driver now
* the rest is usual driver updates (support for more SoCs, some
refactoring, some feature additions)
-----BEGIN PGP SIGNATURE-----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=arni
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
- 'remove' callback converted to return void. Big change with trivial
fixes all over the tree. Other subsystems depending on this change
have been asked to pull an immutable topic branch for this.
- new driver for Microchip PCI1xxxx switch
- heavy refactoring of the Mellanox BlueField driver
- we prefer async probe in the i801 driver now
- the rest is usual driver updates (support for more SoCs, some
refactoring, some feature additions)
* tag 'i2c-for-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (37 commits)
i2c: pci1xxxx: prevent signed integer overflow
i2c: acpi: Replace zero-length array with DECLARE_FLEX_ARRAY() helper
i2c: i801: Prefer async probe
i2c: designware-pci: Use standard pattern for memory allocation
i2c: designware-pci: Group AMD NAVI quirk parts together
i2c: microchip: pci1xxxx: Add driver for I2C host controller in multifunction endpoint of pci1xxxx switch
docs: i2c: slave-interface: return errno when handle I2C_SLAVE_WRITE_REQUESTED
i2c: mlxbf: remove device tree support
i2c: mlxbf: support BlueField-3 SoC
i2c: cadence: Add standard bus recovery support
i2c: mlxbf: add multi slave functionality
i2c: mlxbf: support lock mechanism
macintosh/ams: Adapt declaration of ams_i2c_remove() to earlier change
i2c: riic: Use devm_platform_ioremap_resource()
i2c: mlxbf: remove IRQF_ONESHOT
dt-bindings: i2c: rockchip: add rockchip,rk3128-i2c
dt-bindings: i2c: renesas,rcar-i2c: Add r8a779g0 support
i2c: tegra: Add GPCDMA support
i2c: scmi: Convert to be a platform driver
i2c: rk3x: Add rv1126 support
...
The pm_runtime_enable will increase power disable depth. Thus
a pairing decrement is needed on the error handling path to
keep it balanced according to context. We fix it by calling
pm_runtime_disable when error returns.
Fixes:93e8791dd34ca ("ASoC: wm5102: Initial driver")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220929150653.63845-4-zhangqilong3@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The pm_runtime_enable will increase power disable depth. Thus
a pairing decrement is needed on the error handling path to
keep it balanced according to context. We fix it by calling
pm_runtime_enable when error returns.
Fixes:5c6af635fd772 ("ASoC: wm5110: Add audio CODEC driver")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220929150653.63845-3-zhangqilong3@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The pm_runtime_enable will increase power disable depth. Thus
a pairing decrement is needed on the error handling path to
keep it balanced according to context. We fix it by calling
pm_runtime_disable when error returns.
Fixes:40843aea5a9bd ("ASoC: wm8997: Initial CODEC driver")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220929150653.63845-2-zhangqilong3@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This has been a very quiet release for the core but quite a busy one for
drivers with a big crop of new drivers and lots of feature additions and
fixes to existing ones:
- A new string helper parse_int_array_user().
- Improvements to the SOF IPC4 code, especially around trace.
- Support for AMD Rembrant DSPs, AMD Pink Sardine ACP 6.2, Apple Silcon
systems, Everest ES8326, Intel Sky Lake and Kaby Lake, MediaTek
MT8186 support, NXP i.MX8ULP DSPs, Qualcomm SC8280XP, SM8250 and SM8450
and Texas Instruments SRC4392
There is a conflict with the conversion of I2C remove functions to void
in the cs42l42 driver which is fairly straightforward to resolve but
should be highlighted to Linus.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmM6tu0ACgkQJNaLcl1U
h9BHFQf9Ew/yLSHRdeJwNUEb4VjnRtXz+DLQbGeZBNnk/7Yt/STd0EaudUl0OuiJ
+Ok4bLN6/47bwp5OB0kRGdTVycUq+rR2niJu4dgcY0MkfJi7Pyumibp/biips5rw
+Qzj8oOUPu1970zmOktuy84ZY9Ikl02UEQYyUFVL1AJM3aUzfa/gQ24UCEyA2WxD
ai7TcnUf2+zkMzqvfwFeW3avLSh+9ZLRgHHB52VNQXLHO5+YDvmMmyKZydon67n1
+3QZOS57rQRXUgBOraq+AojTXs9gTFXmF8ujD1eA2qL33vqeZaf7upx76a3U/Rm+
9m+6JucR1qrJyErag2nX90HQOvUcxA==
=kv8c
-----END PGP SIGNATURE-----
Merge tag 'asoc-v6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v6.1
This has been a very quiet release for the core but quite a busy one for
drivers with a big crop of new drivers and lots of feature additions and
fixes to existing ones:
- A new string helper parse_int_array_user().
- Improvements to the SOF IPC4 code, especially around trace.
- Support for AMD Rembrant DSPs, AMD Pink Sardine ACP 6.2, Apple Silcon
systems, Everest ES8326, Intel Sky Lake and Kaby Lake, MediaTek
MT8186 support, NXP i.MX8ULP DSPs, Qualcomm SC8280XP, SM8250 and SM8450
and Texas Instruments SRC4392
There is a conflict with the conversion of I2C remove functions to void
in the cs42l42 driver which is fairly straightforward to resolve but
should be highlighted to Linus.
The pm_runtime_enable will increase power disable depth. Thus
a pairing decrement is needed on the error handling path to
keep it balanced according to context. We fix it by moving
pm_runtime_enable to the endding of mt6660_i2c_probe.
Fixes:f289e55c6eeb4 ("ASoC: Add MediaTek MT6660 Speaker Amp Driver")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20220928160116.125020-5-zhangqilong3@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The pm_runtime_enable will increase power disable depth. Thus
a pairing decrement is needed on the error handling path to
keep it balanced according to context. We fix it by moving
pm_runtime_enable to the endding of wm5102_probe.
Fixes:93e8791dd34ca ("ASoC: wm5102: Initial driver")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20220928160116.125020-4-zhangqilong3@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The pm_runtime_enable will increase power disable depth. Thus
a pairing decrement is needed on the error handling path to
keep it balanced according to context. We fix it by moving
pm_runtime_enable to the endding of wm5110_probe.
Fixes:5c6af635fd772 ("ASoC: wm5110: Add audio CODEC driver")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20220928160116.125020-3-zhangqilong3@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The pm_runtime_enable will increase power disable depth. Thus
a pairing decrement is needed on the error handling path to
keep it balanced according to context. We fix it by moving
pm_runtime_enable to the endding of wm8997_probe
Fixes:40843aea5a9bd ("ASoC: wm8997: Initial CODEC driver")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20220928160116.125020-2-zhangqilong3@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This reverts commit ddea4bbf28 ("ASoC:
wcd-mbhc-v2: use pm_runtime_resume_and_get()"), because it introduced
double runtime PM put if pm_runtime_get_sync() returns -EACCES:
wcd934x-codec wcd934x-codec.3.auto: WCD934X Minor:0x1 Version:0x401
wcd934x-codec wcd934x-codec.3.auto: Runtime PM usage count underflow!
The commit claimed no changes in functionality except dropping the
reference on -EACCESS. This is exactly the change introducing bug
because function calls unconditionally pm_runtime_put_autosuspend() at
the end.
Fixes: ddea4bbf28 ("ASoC: wcd-mbhc-v2: use pm_runtime_resume_and_get()")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220929131528.217502-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
After tip sense detects a jack insertion, if automatic
type detection, and manual type detection fails, then
fall back to assume the jack connected belongs to
headphones.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220927121440.2506632-1-sbinding@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If CONFIG_REGMAP_SLIMBUS is not set,
make ARCH=x86_64 CROSS_COMPILE=x86_64-linux-gnu-,
will be failed, like this:
sound/soc/codecs/wcd934x.o: In function `wcd934x_codec_probe':
wcd934x.c:(.text+0x3310): undefined reference to `__regmap_init_slimbus'
make: *** [vmlinux] Error 1
Add select REGMAP_SLIMBUS to config SND_SOC_WCD934X.
Fixes: a61f3b4f47 ("ASoC: wcd934x: add support to wcd9340/wcd9341 codec")
Signed-off-by: Ren Zhijie <renzhijie2@huawei.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220926074042.13297-1-renzhijie2@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Srinivas Kandagatla <srinivas.kandagatla@linaro.org>:
This patchset adds support for SM8450 and SC8280XP SoC and also some of
the fixes requried to get stable audio on X13s.
Tested SmartSpeakers and Headset on SM8450 MTP and
Lenovo Thinkpad X13s.
There are currently no users of this driver's platform data in the
mainline kernel, so let's drop it.
Newer devices should use DT, ACPI, or static software properties to
describe the hardware.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20220920025804.1788667-1-dmitry.torokhov@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If clk_hw_register() fails, the corresponding clk should not be
unregistered.
To handle errors from loops, clean up partial iterations before doing the
goto. So add a clk_hw_unregister().
Then use a while (--i >= 0) loop in the unwind section.
Fixes: 78013a1cf2 ("ASoC: da7219: Fix clock handling around codec level probe")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/e4acceab57a0d9e477a8d5890a45c5309e553e7c.1663875789.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
LPASS VA Macro now has soundwire master to deal with access to
analog mic in low power island use cases.
This is added after sc8280xp, add support for this.
Along with this also add compatibles for sm8450 and sc8280xp.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220906170112.1984-13-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
WSA883x does support clock stop, so remove code that reset
the Codec during runtime pm suspend and add flag to mark
clock stop support.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220906170112.1984-7-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
tx_macro_tx_mixer_put() and tx_macro_dec_mode_put() currently returns zero
eventhough it changes the value.
Fix this, so that change notifications are sent correctly.
Fixes: d207bdea0c ("ASoC: codecs: lpass-tx-macro: add dapm widgets and route")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220906170112.1984-6-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
currently active_decimator[] is unsigned long however we store negative
values when there is no decimator setup -1.
This is first bug, and the second bug is that we do not check if the decimator
is valid before writing to register using decimator as offset in
CDC_TXn_TX_PATH_CTL()
Fix these both by making active_decimator as integer array and adding check
in tx_macro_digital_mute() before accessing CDC_TXn_TX_PATH_CTL() register.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220906170112.1984-5-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Reset soundwire block on frame sync generation clock reset.
Without this we are hitting read/write timeouts randomly during
runtime pm. Along with this remove a swr_reset redundant flag.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220906170112.1984-4-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Reset soundwire block on frame sync generation clock reset.
Without this we are hitting read/write timeouts randomly during
runtime pm. Along with this remove a swr_reset redundant flag.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220906170112.1984-3-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Reset soundwire block on frame sync generation clock reset.
Without this we are hitting read/write timeouts randomly during
runtime pm.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220906170112.1984-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Slimbus streams are first prepared and then enabled, so the cleanup path
should reverse it. The unprepare sets stream->num_ports to 0 and frees
the stream->ports. Calling disable after unprepare was not really
effective (channels was not deactivated) and could lead to further
issues due to making transfers on unprepared stream.
Fixes: a61f3b4f47 ("ASoC: wcd934x: add support to wcd9340/wcd9341 codec")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220921145354.1683791-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Slimbus streams are first prepared and then enabled, so the cleanup path
should reverse it. The unprepare sets stream->num_ports to 0 and frees
the stream->ports. Calling disable after unprepare was not really
effective (channels was not deactivated) and could lead to further
issues due to making transfers on unprepared stream.
Fixes: 20aedafdf4 ("ASoC: wcd9335: add support to wcd9335 codec")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220921145354.1683791-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Per discussion on the alsa-devel mailing list [1], the legacy PIN to PCM
device mapping is obsolete nowadays. The maximum number of the simultaneously
usable PCM devices is equal to the HDMI codec converters.
Remove the extra PCM devices (beyond the detected converters) and force
the use of the dynamic PCM device allocation. The legacy code is removed.
I believe that all HDMI codecs have the jack sensing feature. Move the check
to the codec probe function and print a warning, if a codec without this
feature is detected.
[1] https://lore.kernel.org/alsa-devel/2f37e0b2-1e82-8c0b-2bbd-1e5038d6ecc6@perex.cz/
Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20220922084017.25925-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The SOF CI tests report failures with the following error thrown
kernel: es8316 i2c-ESSX8336:00: Unable to sync registers 0x0-0x1. -121
ES8336 only supports I2C read/write one byte a time, so we do need to
set the .use_single_read and .use_single_write flags to avoid this
sync issue.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: FRED OH <fred.oh@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220922095912.27010-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
After commit bfc5e8b860 ("ASoC: rt5682s: Reduce coupling of
Micbias and Vref2 settings"), the return of rt5682s_probe()
can be simplified. No functional changed.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220920151413.3455255-1-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Martin Povišer <povik+lin@cutebit.org>:
there's a CS42L83 headphone jack codec found in Apple computers (in the
recent 'Apple Silicon' ones as well as in earlier models, one example
[1]). The part isn't publicly documented, but it appears almost
identical to CS42L42, for which we have a driver in kernel. This series
adapts the CS42L42 driver to the new part, and makes one change in
anticipation of a machine driver for the Apple computers.
Patch 1 adds new compatible to the cs42l42 schema.
Patches 2 to 7 are taken from Richard's recent series [2] adding
soundwire support to cs42l42. They are useful refactorings to build on
in the later patches, and also this way our work doesn't diverge.
(I fixed missing free_irq path in cs42l42_init, did
s/Soundwire/SoundWire/ in changelogs, rebased.)
Patch 8 exports some regmap-related symbols from cs42l42.c so they can
be used to create cs42l83 regmap in cs42l83-i2c.c later.
Patch 9 is the cs42l83 support proper.
Patch 10 implements 'set_bclk_ratio' on the cs42l42 core. This will be
called by the upcoming ASoC machine driver for 'Apple Silicon' Macs.
(We have touched on this change to be made in earlier discussion, see
[3] and replies.)
Patch 11 brings cs42l42-i2c.c in sync with cs42l83-i2c.c on
dev_err_probe() usage.
On probe of the ASoC component, the device is reset but the regcache is
retained. This means the regcache gets out of sync if the codec is
rebound to a sound card for a second time. Fix it by reinitializing the
regcache to defaults after the device is reset.
Fixes: b0bcbe6157 ("ASoC: tas2770: Fix calling reset in probe")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220919173453.84292-1-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
On resuming, we anticipate that the jack is detected before playback
or capture. Therefore, we use semaphore to control the jack detection
done without any bothering. During booting, the driver launches jack
detection and releases the semaphore. However, it doesn't perceive the
maniputation of semaphore is not like resuming procedure. This makes
the semaphore's count value become to 2. There is more than one thread
can enter into the critical section. This may get unexpected situation
and make some chaos.
Signed-off-by: SJLIN0 <SJLIN0@nuvoton.com>
Signed-off-by: Wallace Lin <savagecin@gmail.com>
Link: https://lore.kernel.org/r/20220915012800.825196-1-SJLIN0@nuvoton.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver wants to know the bit rate on the serial bus and takes that
to be the value set by 'set_sysclk'. The 'set_bclk_ratio' op is a better
fit for figuring out the clocking parameters of the serial bus, so
implement that and give it precedence over the prior methods.
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220915094444.11434-11-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The CS42L83 part is a headphone jack codec found in recent Apple
machines. It is a publicly undocumented part but as far as can be told
it is identical to CS42L42 except for two points:
* The chip ID is different.
* Of those registers for which we have a default value in the existing
CS42L42 kernel driver, one register (MCLK_CTL) differs in its reset
value on CS42L83.
To address those two points (and only those), add to the CS42L42 driver
a separate CS42L83 front.
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220915094444.11434-10-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Export the regmap callbacks for indicating readable/volatile registers,
also the range structure, to the CS42L42 core namespace. This is in
advance of reusing these bits in a CS42L83 driver frontend.
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220915094444.11434-9-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Split the I2C bus driver definition and probe()/remove() into a
separate module so that a SoundWire build of CS42L42 support does
not have a spurious dependency on I2C.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220915094444.11434-8-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Pass pointers to snd_soc_component_driver and snd_soc_dai_driver
objects into cs42l42_common_probe().
This is in preparation for adding SoundWire support.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220915094444.11434-7-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
On SoundWire the system resume cannot restore registers until the
host controller has re-enumerated the peripheral.
This patch splits cs42l42_resume() into two functions, one to
power up and the other to restore registers, ready for adding
SoundWire support.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220915094444.11434-6-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
To prepare for adding SoundWire the probe must be split into three
parts:
1) The bus-specific probe
2) Common bus-agnostic probe steps
3) Initialization of the peripheral registers
Step (3) must be separate because on SoundWire devices the probe must
enable power supplies and release reset so that the peripheral can be
enumerated by the bus, but it isn't possible to access registers until
enumeration has completed.
The call to devm_snd_soc_register_component() must be done at stage (2)
so that it can EPROBE_DEFER if necessary. In SoundWire systems stage (3)
is not a probe event so a deferral at this stage would not result in
re-probing dependencies.
A new init_done flag indicates that the chip has been identified and
initialized. This is used to prevent cs42l42_remove(), cs42l42_suspend(),
cs42l42_restore() and cs42l42_irq_thread() from attempting register
accesses if the chip was not successfully initialized. Although this
cannot happen on I2C, because the entire probe would fail, it is
possible on SoundWire if probe succeeds but the cs42l42 is never
enumerated.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220915094444.11434-5-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
In preparation for splitting cs42l42_i2c_probe() into multiple functions
replace use of &i2c_client->dev with cs42l42->dev. This reduces diff
clutter in the patch that splits the function.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220915094444.11434-4-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Clean up the handling of bitclock frequency by keeping all the logic
in cs42l42_pcm_hw_params(), which then simply passes the frequency as
an argument to cs42l42_pll_config().
The previous code had become clunky as a legacy of earlier versions of
the clock handling. The logic was split across cs42l42_pcm_hw_params()
and cs42l42_pll_config(), with the params-derived bclk stashed in
struct cs42l42_private only to pass it to cs42l42_pll_config().
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220915094444.11434-3-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Some parts of rt5682s CCF function are implemented
by 'PLLB' dapm widget.
The coupling risk exists, so this patch fixes it.
Signed-off-by: Derek Fang <derek.fang@realtek.com>
Link: https://lore.kernel.org/r/20220913025658.5005-3-derek.fang@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some parts of rt5682s CCF function are implemented
by 'I2S1' dapm widget.
The coupling risk exists, so this patch fixes it.
Signed-off-by: Derek Fang <derek.fang@realtek.com>
Link: https://lore.kernel.org/r/20220913025658.5005-2-derek.fang@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some parts of rt5682s CCF function are implemented by
'MICBIAS' and 'Vref2' dapm widgets.
There is a risk of causing not expected behavior if we
mix using dapm and CCF operations in machine specific code.
This patch reduces the coupling.
Signed-off-by: Derek Fang <derek.fang@realtek.com>
Link: https://lore.kernel.org/r/20220913025658.5005-1-derek.fang@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With the change introduced by 6ac246105b, the calibration can only be
done after the codec probe (but questionable if it is working since
203A_AMP_EN is 0) or when the codec is powered up for audio use, in other
cases "AMP is not ready to run calibration" is printed.
This changes how this worked before the patch: the codec was force powered
on for the duration of the calibration readout, then shut down.
So, if a calibration was asked when the codec was active, it would have
powered it down?
To correct the calibration logic: check if the codec is powered on and if
it is not then enable it, do the readout and put it back to disabled.
Do this while keeping the dapm locked to avoid interfering with normal
operation via DAPM.
Fixes: 6ac246105b ("ASoC: max98390: Remove unnecessary amp on/off conrtol")
Reported-by: Fred Oh <fred.oh@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220916111349.4433-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since commit 2848d34c3b ("ASoC: tas2562: Fix mute/unmute") the
following build warning is seen:
sound/soc/codecs/tas2562.c:442:13: warning: variable 'ret' set but not used [-Wunused-but-set-variable]
Fix the warning by returning the 'ret' variable.
Fixes: 2848d34c3b ("ASoC: tas2562: Fix mute/unmute")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220913231706.516849-1-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch fixup this warning when CONFIG_PM not defined
linux/sound/soc/codecs/ak4458.c:631:13: error: 'ak4458_reset' defined but\
not used [-Werror=unused-function]
631 | static void ak4458_reset(struct ak4458_priv *ak4458, bool active)
| ^~~~~~~~~~~~
cc1: all warnings being treated as errors
Fixes: e9e7df8899 ("ASoC: ak4458: Remove component probe() and remove()")
Reported-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1663057594-29141-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
hdmi-codec.c is using kzalloc(), but we can replace it to
devm_kzalloc() and then, we can remove .remove callback.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/874jxhmjgw.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
