IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The drm_bridge_chain_pre_enable() is not the proper opposite of
drm_bridge_chain_post_disable(). It continues along the chain to
_before_ the starting bridge. Let's fix that.
Fixes: 05193dc38197 ("drm/bridge: Make the bridge chain a double-linked list")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210416153909.v4.1.If62a003f76a2bc4ccc6c53565becc05d2aad4430@changeid
On the Amlogic SoCs, the DW-HDMI HW support is here but the DW-HDMI CEC signal
is not connected to a physical pin, leading to confusion when the dw-hdmi cec
controller can't communicate on the bus.
Disable it to avoid exposing a non-functinal bus.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://patchwork.freedesktop.org/patch/msgid/20210416092737.1971876-3-narmstrong@baylibre.com
This adds DW-HDMI driver a glue option to disable loading of the CEC sub-driver.
On some SoCs, the CEC functionality is enabled in the IP config bits, but the
CEC bus is non-functional like on Amlogic SoCs, where the CEC config bit is set
but the DW-HDMI CEC signal is not connected to a physical pin, leading to some
confusion when the DW-HDMI CEC controller can't communicate on the bus.
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://patchwork.freedesktop.org/patch/msgid/20210416092737.1971876-2-narmstrong@baylibre.com
Added a "break" in the default case of a switch select statement.
GCC complains, although this "break" is not strictly necessary
for the code to work as expected.
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210417161552.6571-1-fmdefrancesco@gmail.com
Since
commit 890880ddfdbe256083170866e49c87618b706ac7
Author: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Date: Fri Jan 4 09:56:10 2019 +0100
drm: Auto-set allow_fb_modifiers when given modifiers at plane init
this is done automatically as part of plane init, if drivers set the
modifier list correctly. Which is the case here.
Acked-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20210413094904.3736372-3-daniel.vetter@ffwll.ch
The DRM_SIL_SII8620 kconfig has a weak `imply` dependency
on EXTCON, which causes issues when sii8620 is built
as a builtin and EXTCON is built as a module.
The symptoms are 'undefined reference' errors caused
by the symbols in EXTCON not being available
to the sii8620 driver.
Fixes: 688838442147 ("drm/bridge/sii8620: use micro-USB cable detection logic to detect MHL")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210419090124.153560-1-robert.foss@linaro.org
Since
commit 890880ddfdbe256083170866e49c87618b706ac7
Author: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Date: Fri Jan 4 09:56:10 2019 +0100
drm: Auto-set allow_fb_modifiers when given modifiers at plane init
this is done automatically as part of plane init, if drivers set the
modifier list correctly. Which is the case here for both dcss and
imx-drm drivers.
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://patchwork.freedesktop.org/patch/msgid/20210413094904.3736372-5-daniel.vetter@ffwll.ch
Since
commit 890880ddfdbe256083170866e49c87618b706ac7
Author: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Date: Fri Jan 4 09:56:10 2019 +0100
drm: Auto-set allow_fb_modifiers when given modifiers at plane init
this is done automatically as part of plane init, if drivers set the
modifier list correctly. Which is the case here.
Acked-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210413094904.3736372-11-daniel.vetter@ffwll.ch
Since
commit 890880ddfdbe256083170866e49c87618b706ac7
Author: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Date: Fri Jan 4 09:56:10 2019 +0100
drm: Auto-set allow_fb_modifiers when given modifiers at plane init
this is done automatically as part of plane init, if drivers set the
modifier list correctly. Which is the case here.
It was slightly inconsistently though, since planes with only linear
modifier support haven't listed that explicitly. Fix that, and cc:
stable to allow userspace to rely on this. Again don't backport
further than where Paul's patch got added.
Cc: stable@vger.kernel.org # v5.1 +
Cc: Pekka Paalanen <pekka.paalanen@collabora.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: linux-tegra@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20210413094904.3736372-10-daniel.vetter@ffwll.ch
If support for Blob resources is available, then dumb BOs created
by the driver can be considered as guest Blobs.
v2: Don't skip transfer and flush commands as part of plane update
as the device may have created a shared mapping. (Gerd)
v3: Don't create dumb BOs as Guest blobs if Virgl is enabled. (Gurchetan)
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Acked-by: Gurchetan Singh <gurchetansingh@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20210413052614.2486768-1-vivek.kasireddy@intel.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Fbdev's helpers for handling conflicting framebuffer drivers are
related to framebuffer apertures, not console emulation. Therefore
remove them from drm_fb_helper.h and inline them into the aperture
helpers. No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210412131043.5787-4-tzimmermann@suse.de
Platform devices might operate on firmware framebuffers, such as VESA
or EFI. Before a native driver for the graphics hardware can take over
the device, it has to remove any platform driver that operates on the
firmware framebuffer. Aperture helpers provide the infrastructure for
native drivers to remove the generic ones.
For now, this only concerns generic fbdev drivers. Code for removing
these is provided by drm_fb_helper_remove_conflicting_framebuffers() et
al. Simply wrap these functions for now. At a later point, code can be
added for generic DRM drivers to acquire firmware framebuffers.
v2:
* fix docs for drm_aperture_remove_framebuffers()
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210412131043.5787-2-tzimmermann@suse.de
Fix the following coccicheck warning:
drivers/gpu/drm/panel//panel-tpo-td043mtea1.c:217:8-16: WARNING:
use scnprintf or sprintf
drivers/gpu/drm/panel//panel-tpo-td043mtea1.c:189:8-16: WARNING:
use scnprintf or sprintf
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1617069288-8317-1-git-send-email-tiantao6@hisilicon.com
Checkpatch was complaining about this - there's no need for us to print
errors when kzalloc() fails, as kzalloc() will already WARN for us. So,
let's fix that before converting things to make checkpatch happy.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210326203807.105754-20-lyude@redhat.com
Since we're about to move drm_dp_helper.c over to drm_dbg_*(), we'll want
to make sure that we can also add ratelimited versions of these macros in
order to retain some of the previous debugging output behavior we had.
However, as I was preparing to do this I noticed that the current
rate limited macros we have are kind of bogus. It looks like when I wrote
these, I didn't notice that we'd always be calling __ratelimit() even if
the debugging message we'd be printing would normally be filtered out due
to the relevant DRM debugging category being disabled.
So, let's fix this by making sure to check drm_debug_enabled() in our
ratelimited macros before calling __ratelimit(), and start using
drm_dev_printk() in order to print debugging messages since that will save
us from doing a redundant drm_debug_enabled() check. And while we're at it,
let's move the code for this into another macro that we can reuse for
defining new ratelimited DRM debug macros more easily.
v2:
* Make sure to use tabs where possible in __DRM_DEFINE_DBG_RATELIMITED()
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210326203807.105754-8-lyude@redhat.com
As pointed out by the documentation for drm_dp_aux_register(),
drm_dp_aux_init() should be used in situations where the AUX channel for a
display driver can potentially be registered before it's respective DRM
driver. This is the case with Tegra, since the DP aux channel exists as a
platform device instead of being a grandchild of the DRM device.
Since we're about to add a backpointer to a DP AUX channel's respective DRM
device, let's fix this so that we don't potentially allow userspace to use
the AUX channel before we've associated it with it's DRM connector.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210326203807.105754-3-lyude@redhat.com
* Make sure that struct members are referred to using @, otherwise they
won't be formatted as such
* Make sure to refer to other struct types using & so they link back to
each struct's definition
* Make sure to precede constant values with % so they're formatted
correctly
Signed-off-by: Lyude Paul <lyude@redhat.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210326203807.105754-2-lyude@redhat.com
The dp->train_set[] for this driver is only two characters, not four so
this memsets too much. Fortunately, this ends up corrupting a struct
hole and not anything important.
Fixes: d76271d22694 ("drm: xlnx: DRM/KMS driver for Xilinx ZynqMP DisplayPort Subsystem")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/YGLwCBMotnrKZu6P@mwanda
If tbo.mem.bus.caching is cached, buffer is intended to be mapped
as cached from CPU. Map it with ioremap_cache.
This wasn't necessary before as device memory was never mapped
as cached from CPU side. It becomes necessary for aldebaran as
device memory is mapped cached from CPU.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Christian Konig <Christian.Koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1614638628-10508-1-git-send-email-Oak.Zeng@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Allocate a new private stub fence in drm_syncobj_assign_null_handle,
instead of using a static stub fence.
When userspace creates a fence with DRM_SYNCOBJ_CREATE_SIGNALED or when
userspace signals a fence via DRM_IOCTL_SYNCOBJ_SIGNAL, the timestamp
obtained when the fence is exported and queried with SYNC_IOC_FILE_INFO
should match when the fence's status was changed from the perspective of
userspace, which is during the respective ioctl.
When a static stub fence started being used in by these ioctls, this
behavior changed. Instead, the timestamp returned by SYNC_IOC_FILE_INFO
became the first time anything used the static stub fence, which has no
meaning to userspace.
Signed-off-by: David Stevens <stevensd@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210408095428.3983055-1-stevensd@google.com
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
If CONFIG_DRM_LONTIUM_LT8912B=m, the following errors will be seen while
compiling lontium-lt8912b.c
drivers/gpu/drm/bridge/lontium-lt8912b.c: In function
‘lt8912_hard_power_on’:
drivers/gpu/drm/bridge/lontium-lt8912b.c:252:2: error: implicit
declaration of function ‘gpiod_set_value_cansleep’; did you mean
‘gpio_set_value_cansleep’? [-Werror=implicit-function-declaration]
gpiod_set_value_cansleep(lt->gp_reset, 0);
^~~~~~~~~~~~~~~~~~~~~~~~
gpio_set_value_cansleep
drivers/gpu/drm/bridge/lontium-lt8912b.c: In function ‘lt8912_parse_dt’:
drivers/gpu/drm/bridge/lontium-lt8912b.c:628:13: error: implicit
declaration of function ‘devm_gpiod_get_optional’; did you mean
‘devm_gpio_request_one’? [-Werror=implicit-function-declaration]
gp_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
^~~~~~~~~~~~~~~~~~~~~~~
devm_gpio_request_one
drivers/gpu/drm/bridge/lontium-lt8912b.c:628:51: error: ‘GPIOD_OUT_HIGH’
undeclared (first use in this function); did you mean ‘GPIOF_INIT_HIGH’?
gp_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
^~~~~~~~~~~~~~
GPIOF_INIT_HIGH
Signed-off-by: Zhang Jianhua <zhangjianhua18@huawei.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210408093822.207917-1-zhangjianhua18@huawei.com
drm_vblank_restore() exists because certain power saving states
can clobber the hardware frame counter. The way it does this is
by guesstimating how many frames were missed purely based on
the difference between the last stored timestamp vs. a newly
sampled timestamp.
If we should call this function before a full frame has
elapsed since we sampled the last timestamp we would end up
with a possibly slightly different timestamp value for the
same frame. Currently we will happily overwrite the already
stored timestamp for the frame with the new value. This
could cause userspace to observe two different timestamps
for the same frame (and the timestamp could even go
backwards depending on how much error we introduce when
correcting the timestamp based on the scanout position).
To avoid that let's not update the stored timestamp at all,
and instead we just fix up the last recorded hw vblank counter
value such that the already stored timestamp/seq number will
match. Thus the next time a vblank irq happens it will calculate
the correct diff between the current and stored hw vblank counter
values.
Sidenote: Another possible idea that came to mind would be to
do this correction only if the power really was removed since
the last time we sampled the hw frame counter. But to do that
we would need a robust way to detect when it has occurred. Some
possibilities could involve some kind of hardare power well
transition counter, or potentially we could store a magic value
in a scratch register that lives in the same power well. But
I'm not sure either of those exist, so would need an actual
investigation to find out. All of that is very hardware specific
of course, so would have to be done in the driver code.
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210218160305.16711-1-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
If the user specifies zero width/height cmdline mode i915 will
blow up as the fbdev path will bypass the regular fb sanity
check that would otherwise have refused to create a framebuffer
with zero width/height.
The reason I thought to try this is so that I can force a specific
depth for fbdev without actually having to hardcode the mode
on the kernel cmdline. Eg. if I pass video=0x0-8 I will get an
8bpp framebuffer at my monitor's native resolution.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190607162611.23514-2-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
When DRM_TOSHIBA_TC358762 is enabled and DRM_KMS_HELPER is disabled,
Kbuild gives the following warning:
WARNING: unmet direct dependencies detected for DRM_PANEL_BRIDGE
Depends on [n]: HAS_IOMEM [=y] && DRM_BRIDGE [=y] && DRM_KMS_HELPER [=n]
Selected by [y]:
- DRM_TOSHIBA_TC358762 [=y] && HAS_IOMEM [=y] && DRM [=y] && DRM_BRIDGE [=y] && OF [=y]
This is because DRM_TOSHIBA_TC358762 selects DRM_PANEL_BRIDGE,
without depending on or selecting DRM_KMS_HELPER,
despite that config option depending on DRM_KMS_HELPER.
Signed-off-by: Julian Braha <julianbraha@gmail.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210222215502.24487-1-julianbraha@gmail.com
Another issue found by KASAN. The bit finding is buried inside the
dp_for_each_set_bit() macro (that passes on to for_each_set_bit() that
calls the bit stuff. These bit functions want an unsigned long pointer
as input and just dumbly casting leads to out-of-bounds accesses.
This fixes that.
Signed-off-by: Carsten Haitzler <carsten.haitzler@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: James Qian Wang <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210204131102.68658-1-carsten.haitzler@foss.arm.com
