IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
commit 29be9100aca2915fab54b5693309bc42956542e5 upstream.
Don't cross a mountpoint that explicitly specifies a backup volume
(target is <vol>.backup) when starting from a backup volume.
It it not uncommon to mount a volume's backup directly in the volume
itself. This can cause tools that are not paying attention to get
into a loop mounting the volume onto itself as they attempt to
traverse the tree, leading to a variety of problems.
This doesn't prevent the general case of loops in a sequence of
mountpoints, but addresses a common special case in the same way
as other afs clients.
Reported-by: Jan Henrik Sylvester <jan.henrik.sylvester@uni-hamburg.de>
Link: http://lists.infradead.org/pipermail/linux-afs/2024-May/008454.html
Reported-by: Markus Suvanto <markus.suvanto@gmail.com>
Link: http://lists.infradead.org/pipermail/linux-afs/2024-February/008074.html
Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/768760.1716567475@warthog.procyon.org.uk
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 67380251e8bbd3302c64fea07f95c31971b91c22 upstream.
Requesting a retune before switching to the RPMB partition has been
observed to cause CRC errors on the RPMB reads (-EILSEQ).
Since RPMB reads can not be retried, the clients would be directly
affected by the errors.
This commit disables the retune request prior to switching to the RPMB
partition: mmc_retune_pause() no longer triggers a retune before the
pause period begins.
This was verified with the sdhci-of-arasan driver (ZynqMP) configured
for HS200 using two separate eMMC cards (DG4064 and 064GB2). In both
cases, the error was easy to reproduce triggering every few tenths of
reads.
With this commit, systems that were utilizing OP-TEE to access RPMB
variables will experience an enhanced performance. Specifically, when
OP-TEE is configured to employ RPMB as a secure storage solution, it not
only writes the data but also the secure filesystem within the
partition. As a result, retrieving any variable involves multiple RPMB
reads, typically around five.
For context, on ZynqMP, each retune request consumed approximately
8ms. Consequently, reading any RPMB variable used to take at the very
minimum 40ms.
After droping the need to retune before switching to the RPMB partition,
this is no longer the case.
Signed-off-by: Jorge Ramirez-Ortiz <jorge@foundries.io>
Acked-by: Avri Altman <avri.altman@wdc.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240103112911.2954632-1-jorge@foundries.io
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 955a923d2809803980ff574270f81510112be9cf upstream.
Currently the code calls mas_start() followed by mas_data_end() if the
maple state is MA_START, but mas_start() may return with the maple state
node == NULL. This will lead to a null pointer dereference when checking
information in the NULL node, which is done in mas_data_end().
Avoid setting the offset if there is no node by waiting until after the
maple state is checked for an empty or single entry state.
A user could trigger the events to cause a kernel oops by unmapping all
vmas to produce an empty maple tree, then mapping a vma that would cause
the scenario described above.
Link: https://lkml.kernel.org/r/20240422203349.2418465-1-Liam.Howlett@oracle.com
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: Marius Fleischer <fleischermarius@gmail.com>
Closes: https://lore.kernel.org/lkml/CAJg=8jyuSxDL6XvqEXY_66M20psRK2J53oBTP+fjV5xpW2-R6w@mail.gmail.com/
Link: https://lore.kernel.org/lkml/CAJg=8jyuSxDL6XvqEXY_66M20psRK2J53oBTP+fjV5xpW2-R6w@mail.gmail.com/
Tested-by: Marius Fleischer <fleischermarius@gmail.com>
Tested-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 29ad6bb313487370f9dfe5441fc8982593b6384e upstream.
In the case of reverse allocation, mas->index and mas->last do not point
to the correct allocation range, which will cause users to get incorrect
allocation results, so fix it. If the user does not use it in a specific
way, this bug will not be triggered.
This is a bug, but only VMA uses it now, the way VMA is used now will
not trigger it. There is a possibility that a user will trigger it in
the future.
Also re-check whether the size is still satisfied after the lower bound
was increased, which is a corner case and is incorrect in previous
versions.
Link: https://lkml.kernel.org/r/20230419093625.99201-1-zhangpeng.00@bytedance.com
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com>
Cc: Liam R. Howlett <Liam.Howlett@Oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bb23f07cb63975968bbabe314486e2b087234fc5 upstream.
Add missing MODULE_FIRMWARE declarations for firmware referenced in
btrtl.c.
Signed-off-by: Dan Gora <dan.gora@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d760117060cf2e90b5c59c5492cab179a4dbce01 upstream.
This patch fixes two issues:
Issue 1
-------
Description
```````````
Current code does not call dma_sync_single_for_cpu() to sync data from
the device side memory to the CPU side memory before the XDP code path
uses the CPU side data.
This causes the XDP code path to read the unset garbage data in the CPU
side memory, resulting in incorrect handling of the packet by XDP.
Solution
````````
1. Add a call to dma_sync_single_for_cpu() before the XDP code starts to
use the data in the CPU side memory.
2. The XDP code verdict can be XDP_PASS, in which case there is a
fallback to the non-XDP code, which also calls
dma_sync_single_for_cpu().
To avoid calling dma_sync_single_for_cpu() twice:
2.1. Put the dma_sync_single_for_cpu() in the code in such a place where
it happens before XDP and non-XDP code.
2.2. Remove the calls to dma_sync_single_for_cpu() in the non-XDP code
for the first buffer only (rx_copybreak and non-rx_copybreak
cases), since the new call that was added covers these cases.
The call to dma_sync_single_for_cpu() for the second buffer and on
stays because only the first buffer is handled by the newly added
dma_sync_single_for_cpu(). And there is no need for special
handling of the second buffer and on for the XDP path since
currently the driver supports only single buffer packets.
Issue 2
-------
Description
```````````
In case the XDP code forwarded the packet (ENA_XDP_FORWARDED),
ena_unmap_rx_buff_attrs() is called with attrs set to 0.
This means that before unmapping the buffer, the internal function
dma_unmap_page_attrs() will also call dma_sync_single_for_cpu() on
the whole buffer (not only on the data part of it).
This sync is both wasteful (since a sync was already explicitly
called before) and also causes a bug, which will be explained
using the below diagram.
The following diagram shows the flow of events causing the bug.
The order of events is (1)-(4) as shown in the diagram.
CPU side memory area
(3)convert_to_xdp_frame() initializes the
headroom with xdpf metadata
||
\/
___________________________________
| |
0 | V 4K
---------------------------------------------------------------------
| xdpf->data | other xdpf | < data > | tailroom ||...|
| | fields | | GARBAGE || |
---------------------------------------------------------------------
/\ /\
|| ||
(4)ena_unmap_rx_buff_attrs() calls (2)dma_sync_single_for_cpu()
dma_sync_single_for_cpu() on the copies data from device
whole buffer page, overwriting side to CPU side memory
the xdpf->data with GARBAGE. ||
0 4K
---------------------------------------------------------------------
| headroom | < data > | tailroom ||...|
| GARBAGE | | GARBAGE || |
---------------------------------------------------------------------
Device side memory area /\
||
(1) device writes RX packet data
After the call to ena_unmap_rx_buff_attrs() in (4), the xdpf->data
becomes corrupted, and so when it is later accessed in
ena_clean_xdp_irq()->xdp_return_frame(), it causes a page fault,
crashing the kernel.
Solution
````````
Explicitly tell ena_unmap_rx_buff_attrs() not to call
dma_sync_single_for_cpu() by passing it the ENA_DMA_ATTR_SKIP_CPU_SYNC
flag.
Fixes: f7d625adeb7b ("net: ena: Add dynamic recycling mechanism for rx buffers")
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David Arinzon <darinzon@amazon.com>
Link: https://lore.kernel.org/r/20231211062801.27891-4-darinzon@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4a63bd179fa8d3fcc44a0d9d71d941ddd62f0c4e upstream.
Currently ALSA timer doesn't have the lower limit of the start tick
time, and it allows a very small size, e.g. 1 tick with 1ns resolution
for hrtimer. Such a situation may lead to an unexpected RCU stall,
where the callback repeatedly queuing the expire update, as reported
by fuzzer.
This patch introduces a sanity check of the timer start tick time, so
that the system returns an error when a too small start size is set.
As of this patch, the lower limit is hard-coded to 100us, which is
small enough but can still work somehow.
Reported-by: syzbot+43120c2af6ca2938cc38@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/r/000000000000fa00a1061740ab6d@google.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240514182745.4015-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
[ backport note: the error handling is changed, as the original commit
is based on the recent cleanup with guard() in commit beb45974dd49
-- tiwai ]
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a638b0461b58aa3205cd9d5f14d6f703d795b4af ]
Top of the kernel thread stack should be reserved for pt_regs. However
this is not the case for the idle threads of the secondary boot harts.
Their stacks overlap with their pt_regs, so both may get corrupted.
Similar issue has been fixed for the primary hart, see c7cdd96eca28
("riscv: prevent stack corruption by reserving task_pt_regs(p) early").
However that fix was not propagated to the secondary harts. The problem
has been noticed in some CPU hotplug tests with V enabled. The function
smp_callin stored several registers on stack, corrupting top of pt_regs
structure including status field. As a result, kernel attempted to save
or restore inexistent V context.
Fixes: 9a2451f18663 ("RISC-V: Avoid using per cpu array for ordered booting")
Fixes: 2875fe056156 ("RISC-V: Add cpu_ops and modify default booting method")
Signed-off-by: Sergey Matyukevich <sergey.matyukevich@syntacore.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240523084327.2013211-1-geomatsi@gmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 52a2c70c3ec555e670a34dd1ab958986451d2dd2 ]
The property name is "sensirion,low-precision", not
"sensicon,low-precision".
Cc: Chris Ruehl <chris.ruehl@gtsys.com.hk>
Fixes: be7373b60df5 ("hwmon: shtc1: add support for device tree bindings")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 12870ae3818e39ea65bf710f645972277b634f72 ]
It's not an error or exceptional situation when the hosting
environment does not expose a name for the LP/guest via RTAS or the
device tree. This happens with qemu when run without the '-name'
option. The message also lacks a newline. Remove it.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Fixes: eddaa9a40275 ("powerpc/pseries: read the lpar name from the firmware")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240524-lparcfg-updates-v2-1-62e2e9d28724@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2dc8b1e7177d4f49f492ce648440caf2de0c3616 ]
The driver overrides the NUMA node id of the device regardless of
whether it knows its correct value (often setting it to -1 even though
the node id is advertised in 'struct device'). This can lead to
suboptimal configurations.
This patch fixes this behavior and makes the shared memory allocation
functions use the NUMA node id advertised by the underlying device.
Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Link: https://lore.kernel.org/r/20240528170912.1204417-1-shayagr@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 50613650c3d6255cef13a129ccaa919ca73a6743 ]
This patch reduces some of the lines by removing newlines
where more variables or print strings can be pushed back
to the previous line while still adhering to the styling
guidelines.
Signed-off-by: David Arinzon <darinzon@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: 2dc8b1e7177d ("net: ena: Fix redundant device NUMA node override")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f7d625adeb7bc6a9ec83d32d9615889969d64484 ]
The current implementation allocates page-sized rx buffers.
As traffic may consist of different types and sizes of packets,
in various cases, buffers are not fully used.
This change (Dynamic RX Buffers - DRB) uses part of the allocated rx
page needed for the incoming packet, and returns the rest of the
unused page to be used again as an rx buffer for future packets.
A threshold of 2K for unused space has been set in order to declare
whether the remainder of the page can be reused again as an rx buffer.
As a page may be reused, dma_sync_single_for_cpu() is added in order
to sync the memory to the CPU side after it was owned by the HW.
In addition, when the rx page can no longer be reused, it is being
unmapped using dma_page_unmap(), which implicitly syncs and then
unmaps the entire page. In case the kernel still handles the skbs
pointing to the previous buffers from that rx page, it may access
garbage pointers, caused by the implicit sync overwriting them.
The implicit dma sync is removed by replacing dma_page_unmap() with
dma_unmap_page_attrs() with DMA_ATTR_SKIP_CPU_SYNC flag.
The functionality is disabled for XDP traffic to avoid handling
several descriptors per packet.
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: David Arinzon <darinzon@amazon.com>
Link: https://lore.kernel.org/r/20230612121448.28829-1-darinzon@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 2dc8b1e7177d ("net: ena: Fix redundant device NUMA node override")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 278d65ccdadb5f0fa0ceaf7b9cc97b305cd72822 ]
The driver should return RMII interface when XMII is running in RMII mode.
Fixes: 0ab7f6bf1675 ("net: dsa: microchip: ksz9477: use common xmii function")
Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Acked-by: Jerry Ray <jerry.ray@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/1716932066-3342-1-git-send-email-Tristram.Ha@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 95d7c452a26564ef0c427f2806761b857106d8c4 ]
The dev_warn to notify about a spurious interrupt was introduced with
the reasoning that these are unexpected. However spurious interrupts
tend to trigger continously and the error message on the serial console
prevents that the core's detection of spurious interrupts kicks in
(which disables the irq) and just floods the console.
Fixes: c64e7efe46b7 ("spi: stm32: make spurious and overrun interrupts visible")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://msgid.link/r/20240521105241.62400-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d4f36db62396b73bed383c0b6e48d36278cafa78 ]
With gcc-7 and earlier, there are lots of warnings like
In file included from <command-line>:0:0:
In function '__guc_context_policy_add_priority.isra.66',
inlined from '__guc_context_set_prio.isra.67' at drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c:3292:3,
inlined from 'guc_context_set_prio' at drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c:3320:2:
include/linux/compiler_types.h:399:38: error: call to '__compiletime_assert_631' declared with attribute error: FIELD_PREP: mask is not constant
_compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
^
...
drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c:2422:3: note: in expansion of macro 'FIELD_PREP'
FIELD_PREP(GUC_KLV_0_KEY, GUC_CONTEXT_POLICIES_KLV_ID_##id) | \
^~~~~~~~~~
Make sure that GUC_KLV_0_KEY is an unsigned value to avoid the warning.
Fixes: 77b6f79df66e ("drm/i915/guc: Update to GuC version 69.0.3")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Julia Filipchuk <julia.filipchuk@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240430164809.482131-1-julia.filipchuk@intel.com
(cherry picked from commit 364e039827ef628c650c21c1afe1c54d9c3296d9)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aabdc960a283ba78086b0bf66ee74326f49e218e ]
Currently, comparisons to 'm' or 'n' result in incorrect output.
[Test Code]
config MODULES
def_bool y
modules
config A
def_tristate m
config B
def_bool A > n
CONFIG_B is unset, while CONFIG_B=y is expected.
The reason for the issue is because Kconfig compares the tristate values
as strings.
Currently, the .type fields in the constant symbol definitions,
symbol_{yes,mod,no} are unspecified, i.e., S_UNKNOWN.
When expr_calc_value() evaluates 'A > n', it checks the types of 'A' and
'n' to determine how to compare them.
The left-hand side, 'A', is a tristate symbol with a value of 'm', which
corresponds to a numeric value of 1. (Internally, 'y', 'm', and 'n' are
represented as 2, 1, and 0, respectively.)
The right-hand side, 'n', has an unknown type, so it is treated as the
string "n" during the comparison.
expr_calc_value() compares two values numerically only when both can
have numeric values. Otherwise, they are compared as strings.
symbol numeric value ASCII code
-------------------------------------
y 2 0x79
m 1 0x6d
n 0 0x6e
'm' is greater than 'n' if compared numerically (since 1 is greater
than 0), but smaller than 'n' if compared as strings (since the ASCII
code 0x6d is smaller than 0x6e).
Specifying .type=S_TRISTATE for symbol_{yes,mod,no} fixes the above
test code.
Doing so, however, would cause a regression to the following test code.
[Test Code 2]
config MODULES
def_bool n
modules
config A
def_tristate n
config B
def_bool A = m
You would get CONFIG_B=y, while CONFIG_B should not be set.
The reason is because sym_get_string_value() turns 'm' into 'n' when the
module feature is disabled. Consequently, expr_calc_value() evaluates
'A = n' instead of 'A = m'. This oddity has been hidden because the type
of 'm' was previously S_UNKNOWN instead of S_TRISTATE.
sym_get_string_value() should not tweak the string because the tristate
value has already been correctly calculated. There is no reason to
return the string "n" where its tristate value is mod.
Fixes: 31847b67bec0 ("kconfig: allow use of relations other than (in)equality")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e8ded22ef0f4831279c363c264cd41cd9d59ca9e ]
This removes the restriction of needing iif selector in the
forward/input hooks for fib lookups when requested result is
oif/oifname.
Removing this restriction allows "loose" lookups from the forward hooks.
Fixes: be8be04e5ddb ("netfilter: nft_fib: reverse path filter for policy-based routing on iif")
Signed-off-by: Eric Garver <eric@garver.life>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 21a673bddc8fd4873c370caf9ae70ffc6d47e8d3 ]
syzbot reports:
general protection fault, probably for non-canonical address 0xdffffc0000000003: 0000 [#1] PREEMPT SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f]
[..]
RIP: 0010:nf_tproxy_laddr4+0xb7/0x340 net/ipv4/netfilter/nf_tproxy_ipv4.c:62
Call Trace:
nft_tproxy_eval_v4 net/netfilter/nft_tproxy.c:56 [inline]
nft_tproxy_eval+0xa9a/0x1a00 net/netfilter/nft_tproxy.c:168
__in_dev_get_rcu() can return NULL, so check for this.
Reported-and-tested-by: syzbot+b94a6818504ea90d7661@syzkaller.appspotmail.com
Fixes: cc6eb4338569 ("tproxy: use the interface primary IP address as a default value for --on-ip")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 33c563ebf8d3deed7d8addd20d77398ac737ef9a ]
Userspace assumes vlan header is present at a given offset, but vlan
offload allows to store this in metadata fields of the skbuff. Hence
mangling vlan results in a garbled packet. Handle this transparently by
adding a parser to the kernel.
If vlan metadata is present and payload offset is over 12 bytes (source
and destination mac address fields), then subtract vlan header present
in vlan metadata, otherwise mangle vlan metadata based on offset and
length, extracting data from the source register.
This is similar to:
8cfd23e67401 ("netfilter: nft_payload: work around vlan header stripping")
to deal with vlan payload mangling.
Fixes: 7ec3f7b47b8d ("netfilter: nft_payload: add packet mangling support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit af84f9e447a65b4b9f79e7e5d69e19039b431c56 ]
nft can perform merging of adjacent payload requests.
This means that:
ether saddr 00:11 ... ether type 8021ad ...
is a single payload expression, for 8 bytes, starting at the
ethernet source offset.
Check that offset+length is fully within the source/destination mac
addersses.
This bug prevents 'ether type' from matching the correct h_proto in case
vlan tag got stripped.
Fixes: de6843be3082 ("netfilter: nft_payload: rebuild vlan header when needed")
Reported-by: David Ward <david.ward@ll.mit.edu>
Signed-off-by: Florian Westphal <fw@strlen.de>
Stable-dep-of: 33c563ebf8d3 ("netfilter: nft_payload: skbuff vlan metadata mangle support")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ac1f8c049319847b1b4c6b387fdb2e3f7fb84ffc ]
Not required to expose this header in nf_tables_core.h, move it to where
it is used, ie. nft_payload.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Stable-dep-of: 33c563ebf8d3 ("netfilter: nft_payload: skbuff vlan metadata mangle support")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 82617b9a04649e83ee8731918aeadbb6e6d7cbc7 ]
The ice_vsi_add_vlan() function is used to add a VLAN filter for the target
VSI. This function prepares a filter in the switch table for the given VSI.
If it succeeds, the vsi->num_vlan counter is incremented.
It is not considered an error to add a VLAN which already exists in the
switch table, so the function explicitly checks and ignores -EEXIST. The
vsi->num_vlan counter is still incremented.
This seems incorrect, as it means we can double-count in the case where the
same VLAN is added twice by the caller. The actual table will have one less
filter than the count.
The ice_vsi_del_vlan() function similarly checks and handles the -ENOENT
condition for when deleting a filter that doesn't exist. This flow only
decrements the vsi->num_vlan if it actually deleted a filter.
The vsi->num_vlan counter is used only in a few places, primarily related
to tracking the number of non-zero VLANs. If the vsi->num_vlans gets out of
sync, then ice_vsi_num_non_zero_vlans() will incorrectly report more VLANs
than are present, and ice_vsi_has_non_zero_vlans() could return true
potentially in cases where there are only VLAN 0 filters left.
Fix this by only incrementing the vsi->num_vlan in the case where we
actually added an entry, and not in the case where the entry already
existed.
Fixes: a1ffafb0b4a4 ("ice: Support configuring the device to Double VLAN Mode")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240523-net-2024-05-23-intel-net-fixes-v1-2-17a923e0bb5f@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bf0497f53c8535f99b72041529d3f7708a6e2c0d ]
When fec_probe() fails or fec_drv_remove() needs to release the
fec queue and remove a NAPI context, therefore add a function
corresponding to fec_enet_init() and call fec_enet_deinit() which
does the opposite to release memory and remove a NAPI context.
Fixes: 59d0f7465644 ("net: fec: init multi queue date structure")
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240524050528.4115581-1-xiaolei.wang@windriver.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 98e948fb60d41447fd8d2d0c3b8637fc6b6dc26d ]
We have seen an influx of syzkaller reports where a BPF program attached to
a tracepoint triggers a locking rule violation by performing a map_delete
on a sockmap/sockhash.
We don't intend to support this artificial use scenario. Extend the
existing verifier allowed-program-type check for updating sockmap/sockhash
to also cover deleting from a map.
From now on only BPF programs which were previously allowed to update
sockmap/sockhash can delete from these map types.
Fixes: ff9105993240 ("bpf, sockmap: Prevent lock inversion deadlock in map delete elem")
Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Reported-by: syzbot+ec941d6e24f633a59172@syzkaller.appspotmail.com
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: syzbot+ec941d6e24f633a59172@syzkaller.appspotmail.com
Acked-by: John Fastabend <john.fastabend@gmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=ec941d6e24f633a59172
Link: https://lore.kernel.org/bpf/20240527-sockmap-verify-deletes-v1-1-944b372f2101@cloudflare.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 52a2f0608366a629d43dacd3191039c95fef74ba ]
LED Select (LED_SEL) bit in the LED General Purpose IO Configuration
register is used to determine the functionality of external LED pins
(Speed Indicator, Link and Activity Indicator, Full Duplex Link
Indicator). The default value for this bit is 0 when no EEPROM is
present. If a EEPROM is present, the default value is the value of the
LED Select bit in the Configuration Flags of the EEPROM. A USB Reset or
Lite Reset (LRST) will cause this bit to be restored to the image value
last loaded from EEPROM, or to be set to 0 if no EEPROM is present.
While configuring the dual purpose GPIO/LED pins to LED outputs in the
LED General Purpose IO Configuration register, the LED_SEL bit is changed
as 0 and resulting the configured value from the EEPROM is cleared. The
issue is fixed by using read-modify-write approach.
Fixes: f293501c61c5 ("smsc95xx: configure LED outputs")
Signed-off-by: Parthiban Veerasooran <Parthiban.Veerasooran@microchip.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Woojung Huh <woojung.huh@microchip.com>
Link: https://lore.kernel.org/r/20240523085314.167650-1-Parthiban.Veerasooran@microchip.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 51d1b25a720982324871338b1a36b197ec9bd6f0 ]
syzkaller reported data-race of sk->sk_hash in unix_autobind() [0],
and the same ones exist in unix_bind_bsd() and unix_bind_abstract().
The three bind() functions prefetch sk->sk_hash locklessly and
use it later after validating that unix_sk(sk)->addr is NULL under
unix_sk(sk)->bindlock.
The prefetched sk->sk_hash is the hash value of unbound socket set
in unix_create1() and does not change until bind() completes.
There could be a chance that sk->sk_hash changes after the lockless
read. However, in such a case, non-NULL unix_sk(sk)->addr is visible
under unix_sk(sk)->bindlock, and bind() returns -EINVAL without using
the prefetched value.
The KCSAN splat is false-positive, but let's silence it by reading
sk->sk_hash under unix_sk(sk)->bindlock.
[0]:
BUG: KCSAN: data-race in unix_autobind / unix_autobind
write to 0xffff888034a9fb88 of 4 bytes by task 4468 on cpu 0:
__unix_set_addr_hash net/unix/af_unix.c:331 [inline]
unix_autobind+0x47a/0x7d0 net/unix/af_unix.c:1185
unix_dgram_connect+0x7e3/0x890 net/unix/af_unix.c:1373
__sys_connect_file+0xd7/0xe0 net/socket.c:2048
__sys_connect+0x114/0x140 net/socket.c:2065
__do_sys_connect net/socket.c:2075 [inline]
__se_sys_connect net/socket.c:2072 [inline]
__x64_sys_connect+0x40/0x50 net/socket.c:2072
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x4f/0x110 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x46/0x4e
read to 0xffff888034a9fb88 of 4 bytes by task 4465 on cpu 1:
unix_autobind+0x28/0x7d0 net/unix/af_unix.c:1134
unix_dgram_connect+0x7e3/0x890 net/unix/af_unix.c:1373
__sys_connect_file+0xd7/0xe0 net/socket.c:2048
__sys_connect+0x114/0x140 net/socket.c:2065
__do_sys_connect net/socket.c:2075 [inline]
__se_sys_connect net/socket.c:2072 [inline]
__x64_sys_connect+0x40/0x50 net/socket.c:2072
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x4f/0x110 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x46/0x4e
value changed: 0x000000e4 -> 0x000001e3
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 4465 Comm: syz-executor.0 Not tainted 6.8.0-12822-gcd51db110a7e #12
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
Fixes: afd20b9290e1 ("af_unix: Replace the big lock with small locks.")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20240522154218.78088-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e8021b94b0412c37bcc79027c2e382086b6ce449 ]
enic_set_vf_port assumes that the nl attribute IFLA_PORT_PROFILE
is of length PORT_PROFILE_MAX and that the nl attributes
IFLA_PORT_INSTANCE_UUID, IFLA_PORT_HOST_UUID are of length PORT_UUID_MAX.
These attributes are validated (in the function do_setlink in rtnetlink.c)
using the nla_policy ifla_port_policy. The policy defines IFLA_PORT_PROFILE
as NLA_STRING, IFLA_PORT_INSTANCE_UUID as NLA_BINARY and
IFLA_PORT_HOST_UUID as NLA_STRING. That means that the length validation
using the policy is for the max size of the attributes and not on exact
size so the length of these attributes might be less than the sizes that
enic_set_vf_port expects. This might cause an out of bands
read access in the memcpys of the data of these
attributes in enic_set_vf_port.
Fixes: f8bd909183ac ("net: Add ndo_{set|get}_vf_port support for enic dynamic vnics")
Signed-off-by: Roded Zats <rzats@paloaltonetworks.com>
Link: https://lore.kernel.org/r/20240522073044.33519-1-rzats@paloaltonetworks.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2be46155d792d629e8fe3188c2cde176833afe36 ]
The 2024 ASUS ROG G814J model is much the same as the 2023 model
and the 2023 16" version. We can use the same Cirrus Amp quirk.
Fixes: 811dd426a9b1 ("ALSA: hda/realtek: Add quirks for Asus ROG 2024 laptops using CS35L41")
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20240526091032.114545-1-luke@ljones.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b759a5f097cd42c666f1ebca8da50ff507435fbe ]
Amends the last quirk for the G634 with 0x1caf subsys to enable the rear
speakers via pincfg.
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20230704044619.19343-4-luke@ljones.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Stable-dep-of: 2be46155d792 ("ALSA: hda/realtek: Adjust G814JZR to use SPI init for amp")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 555434fd5c6b3589d9511ab6e88faf50346e19da ]
Adds the required quirk to enable the Cirrus amp and correct pins
on the ASUS ROG G634Z series.
While this works if the related _DSD properties are made available, these
aren't included in the ACPI of these laptops (yet).
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20230619060320.1336455-1-luke@ljones.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Stable-dep-of: 2be46155d792 ("ALSA: hda/realtek: Adjust G814JZR to use SPI init for amp")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 495000a38634e640e2fd02f7e4f1512ccc92d770 ]
The card-specific debugfs entries are removed at the last stage of
card free phase, and it's performed after synchronization of the
closes of all opened fds. This works fine for most cases, but it can
be potentially problematic for a hotplug device like USB-audio. Due
to the nature of snd_card_free_when_closed(), the card free isn't
called immediately after the driver removal for a hotplug device, but
it's left until the last fd is closed. It implies that the card
debugfs entries also remain. Meanwhile, when a new device is inserted
before the last close and the very same card slot is assigned, the
driver tries to create the card debugfs root again on the very same
path. This conflicts with the remaining entry, and results in the
kernel warning such as:
debugfs: Directory 'card0' with parent 'sound' already present!
with the missing debugfs entry afterwards.
For avoiding such conflicts, remove debugfs entries at the device
disconnection phase instead. The jack kctl debugfs entries get
removed in snd_jack_dev_disconnect() instead of each kctl
private_free.
Fixes: 2d670ea2bd53 ("ALSA: jack: implement software jack injection via debugfs")
Link: https://lore.kernel.org/r/20240524151256.32521-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7234795b59f7b0b14569ec46dce56300a4988067 ]
We can simplify the code gracefully with new guard() macro and co for
automatic cleanup of locks.
Only the code refactoring, and no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240227085306.9764-11-tiwai@suse.de
Stable-dep-of: 495000a38634 ("ALSA: core: Remove debugfs at disconnection")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 44382b3ed6b2787710c8ade06c0e97f5970a47c8 ]
err is a 32-bit integer, but elf_update returns an off_t, which is 64-bit
at least on 64-bit platforms. If symbols_patch is called on a binary between
2-4GB in size, the result will be negative when cast to a 32-bit integer,
which the code assumes means an error occurred. This can wrongly trigger
build failures when building very large kernel images.
Fixes: fbbb68de80a4 ("bpf: Add resolve_btfids tool to resolve BTF IDs in ELF object")
Signed-off-by: Friedrich Vock <friedrich.vock@gmx.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240514070931.199694-1-friedrich.vock@gmx.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b794918961516f667b0c745aebdfebbb8a98df39 ]
Since commit a6aa8fca4d79 ("dma-buf/sw-sync: Reduce irqsave/irqrestore from
known context") by error replaced spin_unlock_irqrestore() with
spin_unlock_irq() for both sync_debugfs_show() and sync_print_obj() despite
sync_print_obj() is called from sync_debugfs_show(), lockdep complains
inconsistent lock state warning.
Use plain spin_{lock,unlock}() for sync_print_obj(), for
sync_debugfs_show() is already using spin_{lock,unlock}_irq().
Reported-by: syzbot <syzbot+a225ee3df7e7f9372dbe@syzkaller.appspotmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=a225ee3df7e7f9372dbe
Fixes: a6aa8fca4d79 ("dma-buf/sw-sync: Reduce irqsave/irqrestore from known context")
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c2e46020-aaa6-4e06-bf73-f05823f913f0@I-love.SAKURA.ne.jp
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 83fea49f2711fc90c0d115b0ed04046b45155b65 ]
When the skb is encapsulated, adjust the inner UDP header instead of the
outer one, and account for UDP header (instead of TCP) in the inline
header size calculation.
Fixes: 689adf0d4892 ("net/mlx5e: Add UDP GSO support")
Reported-by: Jason Baron <jbaron@akamai.com>
Closes: https://lore.kernel.org/netdev/c42961cb-50b9-4a9a-bd43-87fe48d88d29@akamai.com/
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Boris Pismenny <borisp@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5c74195d5dd977e97556e6fa76909b831c241230 ]
Previously, the driver incorrectly used rx_dropped to report device
buffer exhaustion.
According to the documentation, rx_dropped should not be used to count
packets dropped due to buffer exhaustion, which is the purpose of
rx_missed_errors.
Use rx_missed_errors as intended for counting packets dropped due to
buffer exhaustion.
Fixes: 269e6b3af3bf ("net/mlx5e: Report additional error statistics in get stats ndo")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 51ef9305b8f40946d65c40368ffb4c14636d369a ]
Currently, the driver does not enforce that lag bond slaves must have
matching roce capabilities. Yet, in mlx5_do_bond(), the driver attempts
to enable roce on all vports of the bond slaves, causing the following
syndrome when one slave has no roce fw support:
mlx5_cmd_out_err:809:(pid 25427): MODIFY_NIC_VPORT_CONTEXT(0×755) op_mod(0×0)
failed, status bad parameter(0×3), syndrome (0xc1f678), err(-22)
Thus, create HW lag only if bond's slaves agree on roce state,
either all slaves have roce support resulting in a roce lag bond,
or none do, resulting in a raw eth bond.
Fixes: 7907f23adc18 ("net/mlx5: Implement RoCE LAG feature")
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 128d54fbcb14b8717ecf596d3dbded327b9980b3 ]
Following a similar reinstate for the KSZ8081 and KSZ9031.
Older kernels would use the genphy_soft_reset if the PHY did not implement
a .soft_reset.
The KSZ8061 errata described here:
https://ww1.microchip.com/downloads/en/DeviceDoc/KSZ8061-Errata-DS80000688B.pdf
and worked around with 232ba3a51c ("net: phy: Micrel KSZ8061: link failure after cable connect")
is back again without this soft reset.
Fixes: 6e2d85ec0559 ("net: phy: Stop with excessive soft reset")
Tested-by: Karim Ben Houcine <karim.benhoucine@landisgyr.com>
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f97914e35fd98b2b18fb8a092e0a0799f73afdfe ]
When disabling an nvmet namespace, there is a period where the
subsys->lock is released, as the ns disable waits for backend IO to
complete, and the ns percpu ref to be properly killed. The original
intent was to avoid taking the subsystem lock for a prolong period as
other processes may need to acquire it (for example new incoming
connections).
However, it opens up a window where another process may come in and
enable the ns, (re)intiailizing the ns percpu_ref, causing the disable
sequence to hang.
Solve this by taking the global nvmet_config_sem over the entire configfs
enable/disable sequence.
Fixes: a07b4970f464 ("nvmet: add a generic NVMe target")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e64746e74f717961250a155e14c156616fcd981f ]
cpumask_of_node() can be called for NUMA_NO_NODE inside do_map_benchmark()
resulting in the following sanitizer report:
UBSAN: array-index-out-of-bounds in ./arch/x86/include/asm/topology.h:72:28
index -1 is out of range for type 'cpumask [64][1]'
CPU: 1 PID: 990 Comm: dma_map_benchma Not tainted 6.9.0-rc6 #29
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:117)
ubsan_epilogue (lib/ubsan.c:232)
__ubsan_handle_out_of_bounds (lib/ubsan.c:429)
cpumask_of_node (arch/x86/include/asm/topology.h:72) [inline]
do_map_benchmark (kernel/dma/map_benchmark.c:104)
map_benchmark_ioctl (kernel/dma/map_benchmark.c:246)
full_proxy_unlocked_ioctl (fs/debugfs/file.c:333)
__x64_sys_ioctl (fs/ioctl.c:890)
do_syscall_64 (arch/x86/entry/common.c:83)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
Use cpumask_of_node() in place when binding a kernel thread to a cpuset
of a particular node.
Note that the provided node id is checked inside map_benchmark_ioctl().
It's just a NUMA_NO_NODE case which is not handled properly later.
Found by Linux Verification Center (linuxtesting.org).
Fixes: 65789daa8087 ("dma-mapping: add benchmark support for streaming DMA APIs")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Acked-by: Barry Song <baohua@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1ff05e723f7ca30644b8ec3fb093f16312e408ad ]
While validating node ids in map_benchmark_ioctl(), node_possible() may
be provided with invalid argument outside of [0,MAX_NUMNODES-1] range
leading to:
BUG: KASAN: wild-memory-access in map_benchmark_ioctl (kernel/dma/map_benchmark.c:214)
Read of size 8 at addr 1fffffff8ccb6398 by task dma_map_benchma/971
CPU: 7 PID: 971 Comm: dma_map_benchma Not tainted 6.9.0-rc6 #37
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:117)
kasan_report (mm/kasan/report.c:603)
kasan_check_range (mm/kasan/generic.c:189)
variable_test_bit (arch/x86/include/asm/bitops.h:227) [inline]
arch_test_bit (arch/x86/include/asm/bitops.h:239) [inline]
_test_bit at (include/asm-generic/bitops/instrumented-non-atomic.h:142) [inline]
node_state (include/linux/nodemask.h:423) [inline]
map_benchmark_ioctl (kernel/dma/map_benchmark.c:214)
full_proxy_unlocked_ioctl (fs/debugfs/file.c:333)
__x64_sys_ioctl (fs/ioctl.c:890)
do_syscall_64 (arch/x86/entry/common.c:83)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
Compare node ids with sane bounds first. NUMA_NO_NODE is considered a
special valid case meaning that benchmarking kthreads won't be bound to a
cpuset of a given node.
Found by Linux Verification Center (linuxtesting.org).
Fixes: 65789daa8087 ("dma-mapping: add benchmark support for streaming DMA APIs")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9f788ba457b45b0ce422943fcec9fa35c4587764 ]
There is no need to set the DMA mapped flag of the message if it has
no mapped transfers. Moreover, it may give the code a chance to take
the wrong paths, i.e. to exercise DMA related APIs on unmapped data.
Make __spi_map_msg() to bail earlier on the above mentioned cases.
Fixes: 99adef310f68 ("spi: Provide core support for DMA mapping transfers")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://msgid.link/r/20240522171018.3362521-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aff5c01fa1284d606f8e7cbdaafeef2511bb46c1 ]
Revert f6ae9f120dad ("netfilter: nft_payload: add C-VLAN support").
f41f72d09ee1 ("netfilter: nft_payload: simplify vlan header handling")
already allows to match on inner vlan tags by subtract the vlan header
size to the payload offset which has been popped and stored in skbuff
metadata fields.
Fixes: f6ae9f120dad ("netfilter: nft_payload: add C-VLAN support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
