IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
-----BEGIN PGP SIGNATURE-----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=lv6P
-----END PGP SIGNATURE-----
Merge tag 'for-5.19-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"Features:
- subpage:
- support for PAGE_SIZE > 4K (previously only 64K)
- make it work with raid56
- repair super block num_devices automatically if it does not match
the number of device items
- defrag can convert inline extents to regular extents, up to now
inline files were skipped but the setting of mount option
max_inline could affect the decision logic
- zoned:
- minimal accepted zone size is explicitly set to 4MiB
- make zone reclaim less aggressive and don't reclaim if there are
enough free zones
- add per-profile sysfs tunable of the reclaim threshold
- allow automatic block group reclaim for non-zoned filesystems, with
sysfs tunables
- tree-checker: new check, compare extent buffer owner against owner
rootid
Performance:
- avoid blocking on space reservation when doing nowait direct io
writes (+7% throughput for reads and writes)
- NOCOW write throughput improvement due to refined locking (+3%)
- send: reduce pressure to page cache by dropping extent pages right
after they're processed
Core:
- convert all radix trees to xarray
- add iterators for b-tree node items
- support printk message index
- user bulk page allocation for extent buffers
- switch to bio_alloc API, use on-stack bios where convenient, other
bio cleanups
- use rw lock for block groups to favor concurrent reads
- simplify workques, don't allocate high priority threads for all
normal queues as we need only one
- refactor scrub, process chunks based on their constraints and
similarity
- allocate direct io structures on stack and pass around only
pointers, avoids allocation and reduces potential error handling
Fixes:
- fix count of reserved transaction items for various inode
operations
- fix deadlock between concurrent dio writes when low on free data
space
- fix a few cases when zones need to be finished
VFS, iomap:
- add helper to check if sb write has started (usable for assertions)
- new helper iomap_dio_alloc_bio, export iomap_dio_bio_end_io"
* tag 'for-5.19-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (173 commits)
btrfs: zoned: introduce a minimal zone size 4M and reject mount
btrfs: allow defrag to convert inline extents to regular extents
btrfs: add "0x" prefix for unsupported optional features
btrfs: do not account twice for inode ref when reserving metadata units
btrfs: zoned: fix comparison of alloc_offset vs meta_write_pointer
btrfs: send: avoid trashing the page cache
btrfs: send: keep the current inode open while processing it
btrfs: allocate the btrfs_dio_private as part of the iomap dio bio
btrfs: move struct btrfs_dio_private to inode.c
btrfs: remove the disk_bytenr in struct btrfs_dio_private
btrfs: allocate dio_data on stack
iomap: add per-iomap_iter private data
iomap: allow the file system to provide a bio_set for direct I/O
btrfs: add a btrfs_dio_rw wrapper
btrfs: zoned: zone finish unused block group
btrfs: zoned: properly finish block group on metadata write
btrfs: zoned: finish block group when there are no more allocatable bytes left
btrfs: zoned: consolidate zone finish functions
btrfs: zoned: introduce btrfs_zoned_bg_is_full
btrfs: improve error reporting in lookup_inline_extent_backref
...
A single patch to fix zonefs_init_file_inode() return value.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCYoyTTwAKCRDdoc3SxdoY
dgtgAQC0x4Ecx415K1KuiMEWQU0+b14y6E5dg6r+puXVhRDwmgD9Hj4QJblfdcjz
OPvppXawiA0fzfcOKpm7PJmzT2ASYAM=
=Nnnm
-----END PGP SIGNATURE-----
Merge tag 'zonefs-5.19-rc1-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs
Pull zonefs fix from Damien Le Moal:
"A single patch to fix zonefs_init_file_inode() return value"
* tag 'zonefs-5.19-rc1-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
zonefs: Fix zonefs_init_file_inode() return value
- Add erofs on-demand load support over fscache;
- Support NFS export for erofs;
- Support idmapped mounts for erofs;
- Don't prompt for risk any more when using big pcluster;
- Fix buffer copy overflow of ztailpacking feature;
- Several minor cleanups.
-----BEGIN PGP SIGNATURE-----
iIcEABYIAC8WIQThPAmQN9sSA0DVxtI5NzHcH7XmBAUCYojqfREceGlhbmdAa2Vy
bmVsLm9yZwAKCRA5NzHcH7XmBJ/vAP0XBbClZjsHhiSI/Gkp3UTcQHjR+uDIb2QR
FhAui79F+QEAqCHoKF/F6YFkJdWtH0t6rBeNt6NL0UNU9hw3riF3IwY=
=bcu7
-----END PGP SIGNATURE-----
Merge tag 'erofs-for-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs (and fscache) updates from Gao Xiang:
"After working on it on the mailing list for more than half a year, we
finally form 'erofs over fscache' feature into shape. Hopefully it
could bring more possibility to the communities.
The story mainly started from a new project what we called "RAFS v6" [1]
for Nydus image service almost a year ago, which enhances EROFS to be
a new form of one bootstrap (which includes metadata representing the
whole fs tree) + several data-deduplicated content addressable blobs
(actually treated as multiple devices). Each blob can represent one
container image layer but not quite exactly since all new data can be
fully existed in the previous blobs so no need to introduce another
new blob.
It is actually not a new idea (at least on my side it's much like a
simpilied casync [2] for now) and has many benefits over per-file
blobs or some other exist ways since typically each RAFS v6 image only
has dozens of device blobs instead of thousands of per-file blobs.
It's easy to be signed with user keys as a golden image, transfered
untouchedly with minimal overhead over the network, kept in some type
of storage conveniently, and run with (optional) runtime verification
but without involving too many irrelevant features crossing the system
beyond EROFS itself. At least it's our final goal and we're keeping
working on it. There was also a good summary of this approach from the
casync author [3].
Regardless further optimizations, this work is almost done in the
previous Linux release cycles. In this round, we'd like to introduce
on-demand load for EROFS with the fscache/cachefiles infrastructure,
considering the following advantages:
- Introduce new file-based backend to EROFS. Although each image only
contains dozens of blobs but in densely-deployed runC host for
example, there could still be massive blobs on a machine, which is
messy if each blob is treated as a device. In contrast, fscache and
cachefiles are really great interfaces for us to make them work.
- Introduce on-demand load to fscache and EROFS. Previously, fscache
is mainly used to caching network-likewise filesystems, now it can
support on-demand downloading for local fses too with the exact
localfs on-disk format. It has many advantages which we're been
described in the latest patchset cover letter [4]. In addition to
that, most importantly, the cached data is still stored in the
original local fs on-disk format so that it's still the one signed
with private keys but only could be partially available. Users can
fully trust it during running. Later, users can also back up
cachefiles easily to another machine.
- More reliable on-demand approach in principle. After data is all
available locally, user daemon can be no longer online in some use
cases, which helps daemon crash recovery (filesystems can still in
service) and hot-upgrade (user daemon can be upgraded more
frequently due to new features or protocols introduced.)
- Other format can also be converted to EROFS filesystem format over
the internet on the fly with the new on-demand load feature and
mounted. That is entirely possible with on-demand load feature as
long as such archive format metadata can be fetched in advance like
stargz.
In addition, although currently our target user is Nydus image service [5],
but laterly, it can be used for other use cases like on-demand system
booting, etc. As for the fscache on-demand load feature itself,
strictly it can be used for other local fses too. Laterly we could
promote most code to the iomap infrastructure and also enhance it in
the read-write way if other local fses are interested.
Thanks David Howells for taking so much time and patience on this
these months, many thanks with great respect here again! Thanks Jeffle
for working on this feature and Xin Yin from Bytedance for
asynchronous I/O implementation as well as Zichen Tian, Jia Zhu, and
Yan Song for testing, much appeciated. We're also exploring more
possibly over fscache cache management over FSDAX for secure
containers and working on more improvements and useful features for
fscache, cachefiles, and on-demand load.
In addition to "erofs over fscache", NFS export and idmapped mount are
also completed in this cycle for container use cases as well.
Summary:
- Add erofs on-demand load support over fscache
- Support NFS export for erofs
- Support idmapped mounts for erofs
- Don't prompt for risk any more when using big pcluster
- Fix buffer copy overflow of ztailpacking feature
- Several minor cleanups"
[1] https://lore.kernel.org/r/20210730194625.93856-1-hsiangkao@linux.alibaba.com
[2] https://github.com/systemd/casync
[3] http://0pointer.net/blog/casync-a-tool-for-distributing-file-system-images.html
[4] https://lore.kernel.org/r/20220509074028.74954-1-jefflexu@linux.alibaba.com
[5] https://github.com/dragonflyoss/image-service
* tag 'erofs-for-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs: (29 commits)
erofs: scan devices from device table
erofs: change to use asynchronous io for fscache readpage/readahead
erofs: add 'fsid' mount option
erofs: implement fscache-based data readahead
erofs: implement fscache-based data read for inline layout
erofs: implement fscache-based data read for non-inline layout
erofs: implement fscache-based metadata read
erofs: register fscache context for extra data blobs
erofs: register fscache context for primary data blob
erofs: add erofs_fscache_read_folios() helper
erofs: add anonymous inode caching metadata for data blobs
erofs: add fscache context helper functions
erofs: register fscache volume
erofs: add fscache mode check helper
erofs: make erofs_map_blocks() generally available
cachefiles: document on-demand read mode
cachefiles: add tracepoints for on-demand read mode
cachefiles: enable on-demand read mode
cachefiles: implement on-demand read
cachefiles: notify the user daemon when withdrawing cookie
...
- fix referencing wrong parent directory information during rename.
- introduce a sys_tz mount option to use system timezone.
- improve performance while zeroing a cluster with dirsync mount option.
- fix slab-out-bounds in exat_clear_bitmap() reported from syzbot.
-----BEGIN PGP SIGNATURE-----
iQJKBAABCgA0FiEE6NzKS6Uv/XAAGHgyZwv7A1FEIQgFAmKLhPkWHGxpbmtpbmpl
b25Aa2VybmVsLm9yZwAKCRBnC/sDUUQhCOeXD/9nJofEx/n9KK0pA1WP2zKoLBnP
YgLfnWTBlXfErInklW4kg057S6q8M0pDm0iASLw9P6GZNe0VFV5PigrTyAjy5ghW
hm3JiFAHIZgaOlOk2NQd/1Qv/IdlnkbRkngXqHcizxEX/LcKZpP+pb1mdW6NzWrt
/HagLClFTUhb0Su3DT7TCqiam5lI+lkarRI0Jo4Scstgsn4aT+25jk9N0bfUih7f
hGKJpii+5UWCLlBJnyyghrBRQiiPdsETadJdRnHgeDdzKg/UNWxMP0C+G6PmSko/
mScrR+FeH2toURSUESi1Q558z1+3Fhb8rMbl3aWV70FJDmzMwn9YyhPgBrX3x6Gb
AF7UBHFvORStYRUmmSMbX9XkY2gNoI9qZMXghDRlgF8t/WWY8VeVnyslaWwqDQhw
qXyOIThiCuhLfKTD+r+MM08oUPcyFBtuGvdzDOH7/b56zEDwzab+hSHZz94xPWEz
ESk0hNhaJCEvcgEr7IlSSF4k5Ff+hWVKN4R/DD78yxmjHveOuNMibTeE2YgDIFEX
SiKFaAiXUuWGVsAPuAeJ+np/7rW3OEBG8yKhtri5vsoXk+Mqd56rp0EkEHzqbVHQ
Ki5gua549KNRuxnbXRtWLjCKucwN86mE45WD0P0ORnBOjlfmgg8adp6BBSW5yVD2
SZkfgI0FL8rWdBwRcQ==
=fr78
-----END PGP SIGNATURE-----
Merge tag 'exfat-for-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat
Pull exfat updates from Namjae Jeon:
- fix referencing wrong parent directory information during rename
- introduce a sys_tz mount option to use system timezone
- improve performance while zeroing a cluster with dirsync mount option
- fix slab-out-bounds in exat_clear_bitmap() reported from syzbot
* tag 'exfat-for-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
exfat: check if cluster num is valid
exfat: reduce block requests when zeroing a cluster
block: add sync_blockdev_range()
exfat: introduce mount option 'sys_tz'
exfat: fix referencing wrong parent directory information after renaming
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCYotC2wAKCRCRxhvAZXjc
omivAQD7hDdmZdhGaWgHJKGMofPJ+j62F7QPyoc1UPEkr0sMvAEA1EehhXkw4E8L
6aFsXKs+Bb77TfdZI5EI7cUw1fAWUwE=
=wlyp
-----END PGP SIGNATURE-----
Merge tag 'fs.idmapped.v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull fs idmapping updates from Christian Brauner:
"This contains two minor updates:
- An update to the idmapping documentation by Rodrigo making it
easier to understand that we first introduce several use-cases that
fail without idmapped mounts simply to explain how they can be
handled with idmapped mounts.
- When changing a mount's idmapping we now hold writers to make it
more robust.
This is similar to turning a mount ro with the difference that in
contrast to turning a mount ro changing the idmapping can only ever
be done once while a mount can transition between ro and rw as much
as it wants.
The vfs layer itself takes care to retrieve the idmapping of a
mount once ensuring that the idmapping used for vfs permission
checking is identical to the idmapping passed down to the
filesystem. All filesystems with FS_ALLOW_IDMAP raised take the
same precautions as the vfs in code-paths that are outside of
direct control of the vfs such as ioctl()s.
However, holding writers makes this more robust and predictable for
both the kernel and userspace.
This is a minor user-visible change. But it is extremely unlikely
to matter. The caller must've created a detached mount via
OPEN_TREE_CLONE and then handed that O_PATH fd to another process
or thread which then must've gotten a writable fd for that mount
and started creating files in there while the caller is still
changing mount properties. While not impossible it will be an
extremely rare corner-case and should in general be considered a
bug in the application. Consider making a mount MOUNT_ATTR_NOEXEC
or MOUNT_ATTR_NODEV while allowing someone else to perform lookups
or exec'ing in parallel by handing them a copy of the
OPEN_TREE_CLONE fd or another fd beneath that mount.
I've pinged all major users of idmapped mounts pointing out this
change and none of them have active writers on a mount while still
changing mount properties. It would've been strange if they did.
The rest and majority of the work will be coming through the overlayfs
tree this cycle. In addition to overlayfs this cycle should also see
support for idmapped mounts on erofs as I've acked a patch to this
effect a little while ago"
* tag 'fs.idmapped.v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
fs: hold writers when changing mount's idmapping
docs: Add small intro to idmap examples
-----BEGIN PGP SIGNATURE-----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=HllR
-----END PGP SIGNATURE-----
Merge tag 'media/v5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- dvb-usb drivers entries got reworked to avoid usage of magic numbers
to refer to data position inside tables
- vcodec driver has gained support for MT8186 and for vp8 and vp9
stateless codecs
- hantro has gained support for Hantro G1 on RK366x
- Added more h264 levels on coda960
- ccs gained support for MIPI CSI-2 28 bits per pixel raw data type
- venus driver gained support for Qualcomm custom compressed pixel
formats
- lots of driver fixes and updates
* tag 'media/v5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (308 commits)
media: hantro: Enable HOLD_CAPTURE_BUF for H.264
media: hantro: Add H.264 field decoding support
media: hantro: h264: Make dpb entry management more robust
media: hantro: Stop using H.264 parameter pic_num
media: rkvdec: Enable capture buffer holding for H264
media: rkvdec-h264: Add field decoding support
media: rkvdec: Ensure decoded resolution fit coded resolution
media: rkvdec: h264: Fix reference frame_num wrap for second field
media: rkvdec: h264: Validate and use pic width and height in mbs
media: rkvdec: Move H264 SPS validation in rkvdec-h264
media: rkvdec: h264: Fix bit depth wrap in pps packet
media: rkvdec: h264: Fix dpb_valid implementation
media: rkvdec: Stop overclocking the decoder
media: v4l2: Reorder field reflist
media: h264: Sort p/b reflist using frame_num
media: v4l2: Trace calculated p/b0/b1 initial reflist
media: h264: Store all fields into the unordered list
media: h264: Store current picture fields
media: h264: Increase reference lists size to 32
media: h264: Use v4l2_h264_reference for reflist
...
- Allow error pointer to be passed to fwnode APIs (Andy Shevchenko).
- Introduce fwnode_for_each_parent_node() (Andy Shevchenko, Douglas
Anderson).
- Advertise fwnode and device property count API calls (Andy
Shevchenko).
- Clean up fwnode_is_ancestor_of() (Andy Shevchenko).
- Convert device_{dma_supported,get_dma_attr} to fwnode (Sakari Ailus).
- Release subnode properties with data nodes (Sakari Ailus).
- Add ->iomap() and ->irq_get() to fwnode operations (Sakari Ailus).
-----BEGIN PGP SIGNATURE-----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=ly4P
-----END PGP SIGNATURE-----
Merge tag 'devprop-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull device properties framework updates from Rafael Wysocki:
"These mostly extend the device property API and make it easier to use
in some cases.
Specifics:
- Allow error pointer to be passed to fwnode APIs (Andy Shevchenko).
- Introduce fwnode_for_each_parent_node() (Andy Shevchenko, Douglas
Anderson).
- Advertise fwnode and device property count API calls (Andy
Shevchenko).
- Clean up fwnode_is_ancestor_of() (Andy Shevchenko).
- Convert device_{dma_supported,get_dma_attr} to fwnode (Sakari
Ailus).
- Release subnode properties with data nodes (Sakari Ailus).
- Add ->iomap() and ->irq_get() to fwnode operations (Sakari Ailus)"
* tag 'devprop-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
device property: Advertise fwnode and device property count API calls
device property: Fix recent breakage of fwnode_get_next_parent_dev()
device property: Drop 'test' prefix in parameters of fwnode_is_ancestor_of()
device property: Introduce fwnode_for_each_parent_node()
device property: Allow error pointer to be passed to fwnode APIs
ACPI: property: Release subnode properties with data nodes
device property: Add irq_get to fwnode operation
device property: Add iomap to fwnode operations
ACPI: property: Move acpi_fwnode_device_get_match_data() up
device property: Convert device_{dma_supported,get_dma_attr} to fwnode
- Add thermal library and thermal tools to encapsulate the netlink
into event based callbacks (Daniel Lezcano, Jiapeng Chong).
- Improve overheat condition handling during suspend-to-idle in the
Intel PCH thermal driver (Zhang Rui).
- Use local ops instead of global ops in devfreq_cooling (Kant Fan).
- Clean up _OSC handling in int340x (Davidlohr Bueso).
- Switch hisi_termal from CONFIG_PM_SLEEP guards to pm_sleep_ptr()
(Hesham Almatary).
- Add new k3 j72xx bangdap driver and the corresponding bindings
(Keerthy).
- Fix missing of_node_put() in the SC iMX driver at probe time
(Miaoqian Lin).
- Fix memory leak in __thermal_cooling_device_register() when
device_register() fails by calling thermal_cooling_device_destroy_sysfs()
(Yang Yingliang).
- Add sc8180x and sc8280xp compatible string in the DT bindings and
lMH support for QCom tsens driver (Bjorn Andersson).
- Fix OTP Calibration Register values conforming to the documentation
on RZ/G2L and bindings documentation for RZ/G2UL (Biju Das).
- Fix type in kerneldoc description for __thermal_bind_params (Corentin
Labbe).
- Fix potential NULL dereference in sr_thermal_probe() on Broadcom
platform (Zheng Yongjun).
- Add change mode ops to the thermal-of sensor (Manaf Meethalavalappu
Pallikunhi).
- Fix non-negative value support by preventing the value to be clamp
to zero (Stefan Wahren).
- Add compatible string and DT bindings for MSM8960 tsens driver
(Dmitry Baryshkov).
- Add hwmon support for K3 driver (Massimiliano Minella).
- Refactor and add multiple generations support for QCom ADC driver
(Jishnu Prakash).
- Use platform_get_irq_optional() to get the interrupt on RCar driver and
document Document RZ/V2L bindings (Lad Prabhakar).
- Remove NULL check after container_of() call from the Intel HFI
thermal driver (Haowen Bai).
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmKL3MESHHJqd0Byand5
c29ja2kubmV0AAoJEILEb/54YlRxgzsQAKj4D0ROHLdqReYeIutS7IU6YQ+ejh3N
krcAZvxQd8B3sVwSHHABPdsHwwfYjP4BwoHHVtha5q+5zFGBq5F3fJHsDeRxN23T
NEOW81HBaLu81N5gNuAYg+NQcdqBR4U4IGKZfxWRyx13OMECXGtJRb/SIW/TuDYk
AQIrqOivVEsVRtn+qp+x0rKHsj6ge+2lU1OyJagr2BDhgLrwzxl6cmNBfali1C3D
sw4SqGwGVjEB0QDDpMbty9BsLEjNRE86kwoPh2u0K9dT9/b/P9pk1lp+pOnltspZ
eOdwr0CtoEHw2x5tuhbO7fmvNIuf5jgSDWsCrP/xYnsozcRiwWsgyeJj4f5soreN
kTJB8S/FH+fd7UuYqdmDIeJpDnkkGt1jIqjkDvfJNL7ffBWIe/meXKF4vBnrdlbd
FMNQwzgc5eug07IFjOE43V1v5Hw1H1leVUwZczOMGNIhqyy0WZyQr7vzwbr16jCO
x0hu3q3Y++5SUAUy9WzsOOrpRHa9JxUwVhZuLG7ajf+6pqPxB8kqs9CJe+sgWKju
T4KqHbljJ2Gnkm9SngT0BdnB+AgparhXf8/8Mj0ZBQvamXw+ylNbYfG7qTZk5Ne/
rUf4YDew6hGDqikyJBe2e0a1lLSoN4zaADC1lLYhC+Zp7m6eK0r3y3mhic0bZe1c
RU/2eeA4kTuZ
=3ltV
-----END PGP SIGNATURE-----
Merge tag 'thermal-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These add a thermal library and thermal tools to wrap the netlink
interface into event-based callbacks, improve overheat condition
handling during suspend-to-idle on Intel SoCs, add some new hardware
support, fix bugs and clean up code.
Specifics:
- Add thermal library and thermal tools to encapsulate the netlink
into event based callbacks (Daniel Lezcano, Jiapeng Chong).
- Improve overheat condition handling during suspend-to-idle in the
Intel PCH thermal driver (Zhang Rui).
- Use local ops instead of global ops in devfreq_cooling (Kant Fan).
- Clean up _OSC handling in int340x (Davidlohr Bueso).
- Switch hisi_termal from CONFIG_PM_SLEEP guards to pm_sleep_ptr()
(Hesham Almatary).
- Add new k3 j72xx bangdap driver and the corresponding bindings
(Keerthy).
- Fix missing of_node_put() in the SC iMX driver at probe time
(Miaoqian Lin).
- Fix memory leak in __thermal_cooling_device_register()
when device_register() fails by calling
thermal_cooling_device_destroy_sysfs() (Yang Yingliang).
- Add sc8180x and sc8280xp compatible string in the DT bindings and
lMH support for QCom tsens driver (Bjorn Andersson).
- Fix OTP Calibration Register values conforming to the documentation
on RZ/G2L and bindings documentation for RZ/G2UL (Biju Das).
- Fix type in kerneldoc description for __thermal_bind_params
(Corentin Labbe).
- Fix potential NULL dereference in sr_thermal_probe() on Broadcom
platform (Zheng Yongjun).
- Add change mode ops to the thermal-of sensor (Manaf Meethalavalappu
Pallikunhi).
- Fix non-negative value support by preventing the value to be clamp
to zero (Stefan Wahren).
- Add compatible string and DT bindings for MSM8960 tsens driver
(Dmitry Baryshkov).
- Add hwmon support for K3 driver (Massimiliano Minella).
- Refactor and add multiple generations support for QCom ADC driver
(Jishnu Prakash).
- Use platform_get_irq_optional() to get the interrupt on RCar driver
and document Document RZ/V2L bindings (Lad Prabhakar).
- Remove NULL check after container_of() call from the Intel HFI
thermal driver (Haowen Bai)"
* tag 'thermal-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (38 commits)
thermal: intel: pch: improve the cooling delay log
thermal: intel: pch: enhance overheat handling
thermal: intel: pch: move cooling delay to suspend_noirq phase
PM: wakeup: expose pm_wakeup_pending to modules
thermal: k3_j72xx_bandgap: Add the bandgap driver support
dt-bindings: thermal: k3-j72xx: Add VTM bindings documentation
thermal/drivers/imx_sc_thermal: Fix refcount leak in imx_sc_thermal_probe
thermal/core: Fix memory leak in __thermal_cooling_device_register()
dt-bindings: thermal: tsens: Add sc8280xp compatible
dt-bindings: thermal: lmh: Add Qualcomm sc8180x compatible
thermal/drivers/qcom/lmh: Add sc8180x compatible
thermal/drivers/rz2gl: Fix OTP Calibration Register values
dt-bindings: thermal: rzg2l-thermal: Document RZ/G2UL bindings
thermal: thermal_of: fix typo on __thermal_bind_params
tools/thermal: remove unneeded semicolon
tools/lib/thermal: remove unneeded semicolon
thermal/drivers/broadcom: Fix potential NULL dereference in sr_thermal_probe
tools/thermal: Add thermal daemon skeleton
tools/thermal: Add a temperature capture tool
tools/thermal: Add util library
...
- Update the Energy Model support code to allow the Energy Model to be
artificial, which means that the power values may not be on a uniform
scale with other devices providing power information, and update the
cpufreq_cooling and devfreq_cooling thermal drivers to support
artificial Energy Models (Lukasz Luba).
- Make DTPM check the Energy Model type (Lukasz Luba).
- Fix policy counter decrementation in cpufreq if Energy Model is in
use (Pierre Gondois).
- Add CPU-based scaling support to passive devfreq governor (Saravana
Kannan, Chanwoo Choi).
- Update the rk3399_dmc devfreq driver (Brian Norris).
- Export dev_pm_ops instead of suspend() and resume() in the IIO
chemical scd30 driver (Jonathan Cameron).
- Add namespace variants of EXPORT[_GPL]_SIMPLE_DEV_PM_OPS and
PM-runtime counterparts (Jonathan Cameron).
- Move symbol exports in the IIO chemical scd30 driver into the
IIO_SCD30 namespace (Jonathan Cameron).
- Avoid device PM-runtime usage count underflows (Rafael Wysocki).
- Allow dynamic debug to control printing of PM messages (David
Cohen).
- Fix some kernel-doc comments in hibernation code (Yang Li, Haowen
Bai).
- Preserve ACPI-table override during hibernation (Amadeusz Sławiński).
- Improve support for suspend-to-RAM for PSCI OSI mode (Ulf Hansson).
- Make Intel RAPL power capping driver support the RaptorLake and
AlderLake N processors (Zhang Rui, Sumeet Pawnikar).
- Remove redundant store to value after multiply in the RAPL power
capping driver (Colin Ian King).
- Add AlderLake processor support to the intel_idle driver (Zhang Rui).
- Fix regression leading to no genpd governor in the PSCI cpuidle
driver and fix the riscv-sbi cpuidle driver to allow a genpd
governor to be used (Ulf Hansson).
- Fix cpufreq governor clean up code to avoid using kfree() directly
to free kobject-based items (Kevin Hao).
- Prepare cpufreq for powerpc's asm/prom.h cleanup (Christophe Leroy).
- Make intel_pstate notify frequency invariance code when no_turbo is
turned on and off (Chen Yu).
- Add Sapphire Rapids OOB mode support to intel_pstate (Srinivas
Pandruvada).
- Make cpufreq avoid unnecessary frequency updates due to mismatch
between hardware and the frequency table (Viresh Kumar).
- Make remove_cpu_dev_symlink() clear the real_cpus mask to simplify
code (Viresh Kumar).
- Rearrange cpufreq_offline() and cpufreq_remove_dev() to make the
calling convention for some driver callbacks consistent (Rafael
Wysocki).
- Avoid accessing half-initialized cpufreq policies from the show()
and store() sysfs functions (Schspa Shi).
- Rearrange cpufreq_offline() to make the calling convention for some
driver callbacks consistent (Schspa Shi).
- Update CPPC handling in cpufreq (Pierre Gondois).
- Extend dev_pm_domain_detach() doc (Krzysztof Kozlowski).
- Move genpd's time-accounting to ktime_get_mono_fast_ns() (Ulf
Hansson).
- Improve the way genpd deals with its governors (Ulf Hansson).
- Update the turbostat utility to version 2022.04.16 (Len Brown,
Dan Merillat, Sumeet Pawnikar, Zephaniah E. Loss-Cutler-Hull, Chen
Yu).
-----BEGIN PGP SIGNATURE-----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=Hewm
-----END PGP SIGNATURE-----
Merge tag 'pm-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These add support for 'artificial' Energy Models in which power
numbers for different entities may be in different scales, add support
for some new hardware, fix bugs and clean up code in multiple places.
Specifics:
- Update the Energy Model support code to allow the Energy Model to
be artificial, which means that the power values may not be on a
uniform scale with other devices providing power information, and
update the cpufreq_cooling and devfreq_cooling thermal drivers to
support artificial Energy Models (Lukasz Luba).
- Make DTPM check the Energy Model type (Lukasz Luba).
- Fix policy counter decrementation in cpufreq if Energy Model is in
use (Pierre Gondois).
- Add CPU-based scaling support to passive devfreq governor (Saravana
Kannan, Chanwoo Choi).
- Update the rk3399_dmc devfreq driver (Brian Norris).
- Export dev_pm_ops instead of suspend() and resume() in the IIO
chemical scd30 driver (Jonathan Cameron).
- Add namespace variants of EXPORT[_GPL]_SIMPLE_DEV_PM_OPS and
PM-runtime counterparts (Jonathan Cameron).
- Move symbol exports in the IIO chemical scd30 driver into the
IIO_SCD30 namespace (Jonathan Cameron).
- Avoid device PM-runtime usage count underflows (Rafael Wysocki).
- Allow dynamic debug to control printing of PM messages (David
Cohen).
- Fix some kernel-doc comments in hibernation code (Yang Li, Haowen
Bai).
- Preserve ACPI-table override during hibernation (Amadeusz
Sławiński).
- Improve support for suspend-to-RAM for PSCI OSI mode (Ulf Hansson).
- Make Intel RAPL power capping driver support the RaptorLake and
AlderLake N processors (Zhang Rui, Sumeet Pawnikar).
- Remove redundant store to value after multiply in the RAPL power
capping driver (Colin Ian King).
- Add AlderLake processor support to the intel_idle driver (Zhang
Rui).
- Fix regression leading to no genpd governor in the PSCI cpuidle
driver and fix the riscv-sbi cpuidle driver to allow a genpd
governor to be used (Ulf Hansson).
- Fix cpufreq governor clean up code to avoid using kfree() directly
to free kobject-based items (Kevin Hao).
- Prepare cpufreq for powerpc's asm/prom.h cleanup (Christophe
Leroy).
- Make intel_pstate notify frequency invariance code when no_turbo is
turned on and off (Chen Yu).
- Add Sapphire Rapids OOB mode support to intel_pstate (Srinivas
Pandruvada).
- Make cpufreq avoid unnecessary frequency updates due to mismatch
between hardware and the frequency table (Viresh Kumar).
- Make remove_cpu_dev_symlink() clear the real_cpus mask to simplify
code (Viresh Kumar).
- Rearrange cpufreq_offline() and cpufreq_remove_dev() to make the
calling convention for some driver callbacks consistent (Rafael
Wysocki).
- Avoid accessing half-initialized cpufreq policies from the show()
and store() sysfs functions (Schspa Shi).
- Rearrange cpufreq_offline() to make the calling convention for some
driver callbacks consistent (Schspa Shi).
- Update CPPC handling in cpufreq (Pierre Gondois).
- Extend dev_pm_domain_detach() doc (Krzysztof Kozlowski).
- Move genpd's time-accounting to ktime_get_mono_fast_ns() (Ulf
Hansson).
- Improve the way genpd deals with its governors (Ulf Hansson).
- Update the turbostat utility to version 2022.04.16 (Len Brown, Dan
Merillat, Sumeet Pawnikar, Zephaniah E. Loss-Cutler-Hull, Chen Yu)"
* tag 'pm-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (94 commits)
PM: domains: Trust domain-idle-states from DT to be correct by genpd
PM: domains: Measure power-on/off latencies in genpd based on a governor
PM: domains: Allocate governor data dynamically based on a genpd governor
PM: domains: Clean up some code in pm_genpd_init() and genpd_remove()
PM: domains: Fix initialization of genpd's next_wakeup
PM: domains: Fixup QoS latency measurements for IRQ safe devices in genpd
PM: domains: Measure suspend/resume latencies in genpd based on governor
PM: domains: Move the next_wakeup variable into the struct gpd_timing_data
PM: domains: Allocate gpd_timing_data dynamically based on governor
PM: domains: Skip another warning in irq_safe_dev_in_sleep_domain()
PM: domains: Rename irq_safe_dev_in_no_sleep_domain() in genpd
PM: domains: Don't check PM_QOS_FLAG_NO_POWER_OFF in genpd
PM: domains: Drop redundant code for genpd always-on governor
PM: domains: Add GENPD_FLAG_RPM_ALWAYS_ON for the always-on governor
powercap: intel_rapl: remove redundant store to value after multiply
cpufreq: CPPC: Enable dvfs_possible_from_any_cpu
cpufreq: CPPC: Enable fast_switch
ACPI: CPPC: Assume no transition latency if no PCCT
ACPI: bus: Set CPPC _OSC bits for all and when CPPC_LIB is supported
ACPI: CPPC: Check _OSC for flexible address space
...
- Update ACPICA code in the kernel to upstream revision 20220331
including the following changes:
* Add support for the Windows 11 _OSI string (Mario Limonciello)
* Add the CFMWS subtable to the CEDT table (Lawrence Hileman).
* iASL: NHLT: Treat Terminator as specific_config (Piotr Maziarz).
* iASL: NHLT: Fix parsing undocumented bytes at the end of Endpoint
Descriptor (Piotr Maziarz).
* iASL: NHLT: Rename linux specific strucures to device_info (Piotr
Maziarz).
* Add new ACPI 6.4 semantics to Load() and LoadTable() (Bob Moore).
* Clean up double word in comment (Tom Rix).
* Update copyright notices to the year 2022 (Bob Moore).
* Remove some tabs and // comments - automated cleanup (Bob Moore).
* Replace zero-length array with flexible-array member (Gustavo A. R.
Silva).
* Interpreter: Add units to time variable names (Paul Menzel).
* Add support for ARM Performance Monitoring Unit Table (Besar
Wicaksono).
* Inform users about ACPI spec violation related to sleep length (Paul
Menzel).
* iASL/MADT: Add OEM-defined subtable (Bob Moore).
* Interpreter: Fix some typo mistakes (Selvarasu Ganesan).
* Updates for revision E.d of IORT (Shameer Kolothum).
* Use ACPI_FORMAT_UINT64 for 64-bit output (Bob Moore).
- Improve debug messages in the ACPI device PM code (Rafael Wysocki).
- Block ASUS B1400CEAE from suspend to idle by default (Mario
Limonciello).
- Improve handling of PCI devices that are in D3cold during system
initialization (Rafael Wysocki).
- Fix BERT error region memory mapping (Lorenzo Pieralisi).
- Add support for NVIDIA 16550-compatible port subtype to the SPCR
parsing code (Jeff Brasen).
- Use static for BGRT_SHOW kobj_attribute defines (Tom Rix).
- Fix missing prototype warning for acpi_agdi_init() (Ilkka Koskinen).
- Fix missing ERST record ID in the APEI code (Liu Xinpeng).
- Make APEI error injection to refuse to inject into the zero
page (Tony Luck).
- Correct description of INT3407 / INT3532 DPTF attributes in sysfs
(Sumeet Pawnikar).
- Add support for high frequency impedance notification to the DPTF
driver (Sumeet Pawnikar).
- Make mp_config_acpi_gsi() a void function (Li kunyu).
- Unify Package () representation for properties in the ACPI device
properties documentation (Andy Shevchenko).
- Include UUID in _DSM evaluation warning (Michael Niewöhner).
-----BEGIN PGP SIGNATURE-----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=XH6/
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These update the ACPICA kernel code to upstream revision 20220331,
improve handling of PCI devices that are in D3cold during system
initialization, add support for a few features, fix bugs and clean up
code.
Specifics:
- Update ACPICA code in the kernel to upstream revision 20220331
including the following changes:
- Add support for the Windows 11 _OSI string (Mario Limonciello)
- Add the CFMWS subtable to the CEDT table (Lawrence Hileman).
- iASL: NHLT: Treat Terminator as specific_config (Piotr
Maziarz).
- iASL: NHLT: Fix parsing undocumented bytes at the end of
Endpoint Descriptor (Piotr Maziarz).
- iASL: NHLT: Rename linux specific strucures to device_info
(Piotr Maziarz).
- Add new ACPI 6.4 semantics to Load() and LoadTable() (Bob
Moore).
- Clean up double word in comment (Tom Rix).
- Update copyright notices to the year 2022 (Bob Moore).
- Remove some tabs and // comments - automated cleanup (Bob
Moore).
- Replace zero-length array with flexible-array member (Gustavo
A. R. Silva).
- Interpreter: Add units to time variable names (Paul Menzel).
- Add support for ARM Performance Monitoring Unit Table (Besar
Wicaksono).
- Inform users about ACPI spec violation related to sleep length
(Paul Menzel).
- iASL/MADT: Add OEM-defined subtable (Bob Moore).
- Interpreter: Fix some typo mistakes (Selvarasu Ganesan).
- Updates for revision E.d of IORT (Shameer Kolothum).
- Use ACPI_FORMAT_UINT64 for 64-bit output (Bob Moore).
- Improve debug messages in the ACPI device PM code (Rafael Wysocki).
- Block ASUS B1400CEAE from suspend to idle by default (Mario
Limonciello).
- Improve handling of PCI devices that are in D3cold during system
initialization (Rafael Wysocki).
- Fix BERT error region memory mapping (Lorenzo Pieralisi).
- Add support for NVIDIA 16550-compatible port subtype to the SPCR
parsing code (Jeff Brasen).
- Use static for BGRT_SHOW kobj_attribute defines (Tom Rix).
- Fix missing prototype warning for acpi_agdi_init() (Ilkka
Koskinen).
- Fix missing ERST record ID in the APEI code (Liu Xinpeng).
- Make APEI error injection to refuse to inject into the zero page
(Tony Luck).
- Correct description of INT3407 / INT3532 DPTF attributes in sysfs
(Sumeet Pawnikar).
- Add support for high frequency impedance notification to the DPTF
driver (Sumeet Pawnikar).
- Make mp_config_acpi_gsi() a void function (Li kunyu).
- Unify Package () representation for properties in the ACPI device
properties documentation (Andy Shevchenko).
- Include UUID in _DSM evaluation warning (Michael Niewöhner)"
* tag 'acpi-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (41 commits)
Revert "ACPICA: executer/exsystem: Warn about sleeps greater than 10 ms"
ACPI: utils: include UUID in _DSM evaluation warning
ACPI: PM: Block ASUS B1400CEAE from suspend to idle by default
x86: ACPI: Make mp_config_acpi_gsi() a void function
ACPI: DPTF: Add support for high frequency impedance notification
ACPI: AGDI: Fix missing prototype warning for acpi_agdi_init()
ACPI: bus: Avoid non-ACPI device objects in walks over children
ACPI: DPTF: Correct description of INT3407 / INT3532 attributes
ACPI: BGRT: use static for BGRT_SHOW kobj_attribute defines
ACPI, APEI, EINJ: Refuse to inject into the zero page
ACPI: PM: Always print final debug message in acpi_device_set_power()
ACPI: SPCR: Add support for NVIDIA 16550-compatible port subtype
ACPI: docs: enumeration: Unify Package () for properties (part 2)
ACPI: APEI: Fix missing ERST record id
ACPICA: Update version to 20220331
ACPICA: exsystem.c: Use ACPI_FORMAT_UINT64 for 64-bit output
ACPICA: IORT: Updates for revision E.d
ACPICA: executer/exsystem: Fix some typo mistakes
ACPICA: iASL/MADT: Add OEM-defined subtable
ACPICA: executer/exsystem: Warn about sleeps greater than 10 ms
...
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=JrXf
-----END PGP SIGNATURE-----
Merge tag 'for-linus-2022052401' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Jiri Kosina:
- support for pens with 3 buttons with Wacom driver (Joshua Dickens)
- support for HID_DG_SCANTIME to report the timestamp for pen and touch
events in Wacom driver (Joshua Dickens)
- support for sensor discovery in amd-sfh driver (Basavaraj Natikar)
- support for wider variety of Huion tablets ported from DIGImend
project (José Expósito, Nikolai Kondrashov)
- new device IDs and other assorted small code cleanups
* tag 'for-linus-2022052401' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (44 commits)
HID: apple: Properly handle function keys on Keychron keyboards
HID: uclogic: Switch to Digitizer usage for styluses
HID: uclogic: Add pen support for XP-PEN Star 06
HID: uclogic: Differentiate touch ring and touch strip
HID: uclogic: Always shift touch reports to zero
HID: uclogic: Do not focus on touch ring only
HID: uclogic: Return raw parameters from v2 pen init
HID: uclogic: Move param printing to a function
HID: core: Display "SENSOR HUB" for sensor hub bus string in hid_info
HID: amd_sfh: Move bus declaration outside of amd-sfh
HID: amd_sfh: Add physical location to HID device
HID: amd_sfh: Modify the hid name
HID: amd_sfh: Modify the bus name
HID: amd_sfh: Add sensor name by index for debug info
HID: amd_sfh: Add support for sensor discovery
HID: bigben: fix slab-out-of-bounds Write in bigben_probe
Hid: wacom: Fix kernel test robot warning
HID: uclogic: Disable pen usage for Huion keyboard interfaces
HID: uclogic: Support disabling pen usage
HID: uclogic: Pass keyboard reports as is
...
This is quite a quiet release but some new drivers mean that the
diffstat is fairly large, the new drivers include the aspeed driver
which is migrated from MTD as part of the ongoing move of controllers
with specialised support for SPI flashes into the SPI subsystem.
- Support for devices which flip CPHA during recieve only transfers
(eg, if MOSI and MISO have inverted polarity).
- Overhaul of the i.MX driver, including the addition of PIO support
for better performance on small transfers.
- Migration of the Aspeed driver from MTD.
- Support for Aspeed AST2400, Ingenic JZ4775 and X1/2000 and MediaTek
IPM and SFI.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmKLh9wACgkQJNaLcl1U
h9ApgAf/SvcHRyM06hw+00D2PAco7mxSiAs7rebxj4f0zPRNvUrYbUDWjakeKjoB
ocmpY6AW/vRBUM9xZsiQiLp/9NPltnVghZIBgp5gcS8zaXdxiZjZ68Z+uYp9SP9v
zj8F6bBQzk3lvuY+Cr1f68iXICA62Aa1yX28UFVLZkV0d+0AazpECZkb3hjOiL6P
0qSV6IfoFlJXYsyvAS4/MqYrHklSCD/0Ek09V9jPpZJPHn1ldbFs5zkstfs0PMc/
YeDlpStkjJE4OQ6+z6Ou/wGbcw11nWvKCSqF4bGRXLrgR/uIjOKomwOzaBUf/A6Q
AxQcKMtsBTx0VzYmwJwopj0qDvOq/A==
=6yj3
-----END PGP SIGNATURE-----
Merge tag 'spi-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"This is quite a quiet release but some new drivers mean that the
diffstat is fairly large. The new drivers include the aspeed driver
which is migrated from MTD as part of the ongoing move of controllers
with specialised support for SPI flashes into the SPI subsystem.
- Support for devices which flip CPHA during recieve only transfers
(eg, if MOSI and MISO have inverted polarity).
- Overhaul of the i.MX driver, including the addition of PIO support
for better performance on small transfers.
- Migration of the Aspeed driver from MTD.
- Support for Aspeed AST2400, Ingenic JZ4775 and X1/2000 and MediaTek
IPM and SFI"
* tag 'spi-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (84 commits)
spi: spi-au1550: replace ternary operator with min()
mtd: spi-nor: aspeed: set the decoding size to at least 2MB for AST2600
spi: aspeed: Calibrate read timings
spi: aspeed: Add support for the AST2400 SPI controller
spi: aspeed: Workaround AST2500 limitations
spi: aspeed: Adjust direct mapping to device size
spi: aspeed: Add support for direct mapping
spi: spi-mem: Convert Aspeed SMC driver to spi-mem
spi: Convert the Aspeed SMC controllers device tree binding
spi: spi-cadence: Update ISR status variable type to irqreturn_t
spi: Doc fix - Describe add_lock and dma_map_dev in spi_controller
spi: cadence-quadspi: Handle spi_unregister_master() in remove()
spi: stm32-qspi: Remove SR_BUSY bit check before sending command
spi: stm32-qspi: Always check SR_TCF flags in stm32_qspi_wait_cmd()
spi: stm32-qspi: Fix wait_cmd timeout in APM mode
spi: cadence-quadspi: remove unnecessary (void *) casts
spi: cadence-quadspi: Add missing blank line in cqspi_request_mmap_dma()
spi: spi-imx: mx51_ecspi_prepare_message(): skip writing MX51_ECSPI_CONFIG register if unchanged
spi: spi-imx: add PIO polling support
spi: spi-imx: replace struct spi_imx_data::bitbang by pointer to struct spi_controller
...
This is mostly a drivers update including a couple of new drivers but we
do have some fixes and improvements to the core as well.
- Make sure we don't log spuriously about uncontrollable regulators.
- Don't use delays when we should use sleeps for regulators with
larger ramp times.
- Support for MediaTek MT6358 and MT6366, Richtek RT5759 and Silicon
Mitus SM5703.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmKLhDkACgkQJNaLcl1U
h9BC2ggAhixM/fsZZskBg2x8+zwCxa1WIoEOxQdo5fzYKSSLD6fzHZWc7jtww2KH
vMKE7McaX5M/xoEKWEAUutzMzaMHwLJkvUjWxlzQcOQWG7Z6Mhu5tifcdDc6Y0V2
oicpXZx7wtDDpkrmSYR+UEIcAtnWYHCIvMHZwZBk1YSeTiaajUlBAtxKLIvCl1Bg
ftVLvA0YHWv4LgDWYAGI/W0Ynh8kznsKv9qrkw1LekrdjCxe0Wo0YB0XDAKIMI7z
a/SPgr7SbSsKqYuN1cGHIs+3gzb4mr2ofQTPzn5gIbOSuaQ+T4f6zI/hvNPkzIag
seqGXGig5FEqtY7plOoaLq7uJXtvuA==
=etnu
-----END PGP SIGNATURE-----
Merge tag 'regulator-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"This is mostly a drivers update including a couple of new drivers but
we do have some fixes and improvements to the core as well.
- Make sure we don't log spuriously about uncontrollable regulators.
- Don't use delays when we should use sleeps for regulators with
larger ramp times.
- Support for MediaTek MT6358 and MT6366, Richtek RT5759 and Silicon
Mitus SM5703"
* tag 'regulator-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (36 commits)
regulator: scmi: Fix refcount leak in scmi_regulator_probe
regulator: pfuze100: Fix refcount leak in pfuze_parse_regulators_dt
regulator: qcom_smd: Fix up PM8950 regulator configuration
regulator: core: Fix enable_count imbalance with EXCLUSIVE_GET
regulator: core: Add error flags to sysfs attributes
regulator: dt-bindings: qcom,rpmh: document vdd-l7-bob-supply on PMR735A
regulator: dt-bindings: qcom,rpmh: document supplies per variant
regulator: dt-bindings: qcom,rpmh: update maintainers
regulator: mt6315: Enforce regulator-compatible, not name
regulator: pca9450: Enable DVS control via PMIC_STBY_REQ
regulator: pca9450: Make warm reset on WDOG_B assertion
regulator: Add property for WDOG_B warm reset
regulator: pca9450: Make I2C Level Translator configurable
regulator: Add property for I2C level shifter
regulator: sm5703: Correct reference to the common regulator schema
regulator: sm5703-regulator: Add regulators support for SM5703 MFD
dt-bindings: regulator: Add bindings for Silicon Mitus SM5703 regulators
regulator: richtek,rt4801: parse GPIOs per regulator
regulator: dt-bindings: richtek,rt4801: use existing ena_gpiod feature
regulator: core: Sleep (not delay) in set_voltage()
...
The main change here is Marek's addition of bulk read/write callbacks
for individual regmaps, we've supported single register operations for a
while but there's enough hardware out there which can use bulk equivalents
to make it worthwhile.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmKLgdIACgkQJNaLcl1U
h9BkMQf9GvA9ZtjOzR/K/R9IscyDqnJ/Svwp0nhnbrFzeCDMQyWEUVen+1tE45gl
ACIC2RPDYUfuYeoHC6yxOYpJNwI5WhlLfO9uH14ojRl4JVjnjarFvbRb0xfgCCeg
pp6QRb1DeZzUWQBMcW3ruo76gPOjEI94CVUNbXzcDOUS+ZUDPtbcyeB7wmG2i3zU
qpbG6DN0av/tuFSiGZgE2OFA9pGFDQwsZiu5DYxCTk/vI6hH8lddbjnqtxZGi/hb
g3Ho9XewkI2WTnTaSbbX8Rfl6n/rccrsXy9u7E1usK1vEmzU0mZHIpo1T91IFd5j
ksSJcXWHb7d54tWCwV6AXwbC8ZS4NA==
=Km5j
-----END PGP SIGNATURE-----
Merge tag 'regmap-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"The main change here is Marek's addition of bulk read/write callbacks
for individual regmaps, we've supported single register operations for
a while but there's enough hardware out there which can use bulk
equivalents to make it worthwhile"
* tag 'regmap-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: Add missing map->bus check
regmap: Add bulk read/write callbacks into regmap_config
regmap: cache: set max_register with reg_stride
regmap: Constify static regmap_bus structs
- Support zero-out using TRIM for eMMC
- Allow to override the busy-timeout for the ioctl-cmds
MMC host:
- Continued the conversion of DT bindings into the JSON schema
- jz4740: Apply DMA engine limits to maximum segment size
- mmci_stm32: Use a buffer for unaligned DMA requests
- mmc_spi: Enabled high-speed modes via parsing of DT
- omap: Make clock management to be compliant with CCF
- renesas_sdhi: Support eMMC HS400 mode for R-Car V3H ES2.0
- renesas_sdhi: Don't allow support for eMMC HS400 for R-Car V3M/D3
- sdhci_am654: Fix problem when SD card slot lacks the card detect line
- sdhci-esdhc-imx: Add support for the imx8dxl variant
- sdhci-brcmstb: Enable support for clock gating to save power
- sdhci-msm: Add support for the sdx65 variant
- sdhci-msm: Add support for the sm8150 variant
- sdhci-of-dwcmshc: Add support for the Rockchip rk3588 variant
- sdhci-pci-gli: Add workaround to allow GL9755 to enter ASPM L1.2
-----BEGIN PGP SIGNATURE-----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=eAYF
-----END PGP SIGNATURE-----
Merge tag 'mmc-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC updates from Ulf Hansson:
"MMC core:
- Support zero-out using TRIM for eMMC
- Allow to override the busy-timeout for the ioctl-cmds
MMC host:
- Continued the conversion of DT bindings into the JSON schema
- jz4740: Apply DMA engine limits to maximum segment size
- mmci_stm32: Use a buffer for unaligned DMA requests
- mmc_spi: Enabled high-speed modes via parsing of DT
- omap: Make clock management to be compliant with CCF
- renesas_sdhi:
- Support eMMC HS400 mode for R-Car V3H ES2.0
- Don't allow support for eMMC HS400 for R-Car V3M/D3
- sdhci_am654: Fix problem when SD card slot lacks the card detect
line
- sdhci-esdhc-imx: Add support for the imx8dxl variant
- sdhci-brcmstb: Enable support for clock gating to save power
- sdhci-msm:
- Add support for the sdx65 variant
- Add support for the sm8150 variant
- sdhci-of-dwcmshc: Add support for the Rockchip rk3588 variant
- sdhci-pci-gli: Add workaround to allow GL9755 to enter ASPM L1.2"
* tag 'mmc-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (52 commits)
mmc: sdhci-of-arasan: Add NULL check for data field
mmc: core: Support zeroout using TRIM for eMMC
mmc: sdhci-brcmstb: Fix compiler warning
mmc: sdhci-msm: Add compatible string check for sdx65
dt-bindings: mmc: sdhci-msm: Document the SDX65 compatible
mmc: sdhci-msm: Add compatible string check for sm8150
dt-bindings: mmc: sdhci-msm: Add compatible string for sm8150
mmc: sdhci-msm: Add SoC specific compatibles
dt-bindings: mmc: sdhci-msm: Convert bindings to yaml
dt-bindings: mmc: brcm,sdhci-brcmstb: cleanup example
dt-bindings: mmc: brcm,sdhci-brcmstb: correct number of reg entries
mmc: sdhci-brcmstb: Enable Clock Gating to save power
mmc: sdhci-brcmstb: Re-organize flags
mmc: mmci: Remove custom ios handler
mmc: atmel-mci: Simplify if(chan) and if(!chan)
mmc: core: use kobj_to_dev()
dt-bindings: mmc: sdhci-of-dwcmhsc: Add rk3588
mmc: core: Add CIDs for cards to the entropy pool
mmc: core: Allows to override the timeout value for ioctl() path
mmc: sdhci-omap: Use of_device_get_match_data() helper
...
Add limits on the number of users and messages, plus sysfs interfaces
to control those limits.
Other than that, little cleanups, use dev_xxx() insted of pr_xxx(),
create initializers for structures, fix a refcount leak, etc.
-----BEGIN PGP SIGNATURE-----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=fVOh
-----END PGP SIGNATURE-----
Merge tag 'for-linus-4.19-1' of https://github.com/cminyard/linux-ipmi
Pull IPMI update from Corey Minyard:
"Add limits on the number of users and messages, plus sysfs interfaces
to control those limits.
Other than that, little cleanups, use dev_xxx() insted of pr_xxx(),
create initializers for structures, fix a refcount leak, etc"
* tag 'for-linus-4.19-1' of https://github.com/cminyard/linux-ipmi:
ipmi:ipmb: Fix refcount leak in ipmi_ipmb_probe
ipmi: remove unnecessary type castings
ipmi: Make two logs unique
ipmi:si: Convert pr_debug() to dev_dbg()
ipmi: Convert pr_debug() to dev_dbg()
ipmi: Fix pr_fmt to avoid compilation issues
ipmi: Add an intializer for ipmi_recv_msg struct
ipmi: Add an intializer for ipmi_smi_msg struct
ipmi:ssif: Check for NULL msg when handling events and messages
ipmi: use simple i2c probe function
ipmi: Add a sysfs count of total outstanding messages for an interface
ipmi: Add a sysfs interface to view the number of users
ipmi: Limit the number of message a user may have outstanding
ipmi: Add a limit on the number of users that may use IPMI
* Call of_platform_populate() for MTD partitions
* Check devicetree alias for index
* mtdoops:
- Add a timestamp to the mtdoops header.
- Create a header structure for the saved mtdoops.
- Fix the size of the header read buffer.
* mtdblock: Warn if opened on NAND
* Bindings:
- reserved-memory: Support MTD/block device
- jedec,spi-nor: remove unneeded properties
- Extend fixed-partitions binding
- Add Sercomm (Suzhou) Corporation vendor prefix
MTD driver changes:
* st_spi_fsm: add missing clk_disable_unprepare() in stfsm_remove()
* phram:
- Allow cached mappings
- Allow probing via reserved-memory
* maps: ixp4xx: Drop driver
* bcm47xxpart: Print correct offset on read error
CFI driver changes:
* Rename chip_ready variables
* Add S29GL064N ID definition
* Use chip_ready() for write on S29GL064N
* Move and rename chip_check/chip_ready/chip_good_for_write
NAND core changes:
* Print offset instead of page number for bad blocks
Raw NAND controller drivers:
* Cadence: Fix possible null-ptr-deref in cadence_nand_dt_probe()
* CS553X: simplify the return expression of cs553x_write_ctrl_byte()
* Davinci: Remove redundant unsigned comparison to zero
* Denali: Use managed device resources
* GPMI:
- Add large oob bch setting support
- Rename the variable ecc_chunk_size
- Uninline the gpmi_check_ecc function
- Add strict ecc strength check
- Refactor BCH geometry settings function
* Intel: Fix possible null-ptr-deref in ebu_nand_probe()
* MPC5121: Check before clk_disable_unprepare() not needed
* Mtk:
- MTD_NAND_ECC_MEDIATEK should depend on ARCH_MEDIATEK
- Also parse the default nand-ecc-engine property if available
- Make mtk_ecc.c a separated module
* OMAP ELM:
- Convert the bindings to yaml
- Describe the bindings for AM64 ELM
- Add support for its compatible
* Renesas: Use runtime PM instead of the raw clock API and update the
bindings accordingly
* Rockchip: Check before clk_disable_unprepare() not needed
* TMIO: Check return value after calling platform_get_resource()
Raw NAND chip driver:
* Kioxia: Add support for TH58NVG3S0HBAI4 and TC58NVG0S3HTA00
SPI-NAND chip drivers:
* Gigadevice:
- Add support for:
- GD5FxGM7xExxG
- GD5F{2,4}GQ5xExxG
- GD5F1GQ5RExxG
- GD5FxGQ4xExxG
- Fix Quad IO for GD5F1GQ5UExxG
* XTX: Add support for XT26G0xA
SPI NOR core changes:
* Read back written SR value to make sure the write was done correctly.
* Introduce a common function for Read ID that manufacturer drivers can
use to verify the Octal DTR switch worked correctly.
* Add helpers for read/write any register commands so manufacturer
drivers don't open code it every time.
* Clarify rdsr dummy cycles documentation.
* Add debugfs entry to expose internal flash parameters and state.
SPI NOR manufacturer drivers changes:
* Add support for Winbond W25Q512NW-IM, and Eon EN25QH256A.
* Move spi_nor_write_ear() to Winbond module since only Winbond flashes
use it.
* Rework Micron and Cypress Octal DTR enable methods to improve
readability.
* Use the common Read ID function to verify switch to Octal DTR mode for
Micron and Cypress flashes.
* Skip polling status on volatile register writes for Micron and Cypress
flashes since the operation is instant.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAmKHhXEACgkQJWrqGEe9
VoQ4FQgAwTWnv7Eps8ngxlOE1WW1Kx+XUFCYN7mUKmDycgRKWWqF0OUu3pU6T3Si
XoOixajzsPC7AJtXbbGKUkH3UtqapCZ/OVxMJzY1S1zKVgS72ChvPth+rNOA5H6f
wkwCRYBCm51hYAlOQeRoFtwLEpOP17KTZw9Jn/u5RVwbQedQnzPj5sb6PddejjF4
9nlk2auJHzENBEEBG3WLRNgvGep8mNNFarzWB4iWrMcG0w1EgBksbIdshoBmu7vj
nKcDJbyA81DqX+8d56BfAFih8H2yCXZmhUzMK+zqnNkd1NuPnDDnrQYFKmKm2hAg
3bIMIzi+8dl/m0TY6BHPHj8oIYpjYA==
=P95J
-----END PGP SIGNATURE-----
Merge tag 'mtd/for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull mtd updates from Miquel Raynal:
"MTD core changes:
- Call of_platform_populate() for MTD partitions
- Check devicetree alias for index
- mtdoops:
- Add a timestamp to the mtdoops header.
- Create a header structure for the saved mtdoops.
- Fix the size of the header read buffer.
- mtdblock: Warn if opened on NAND
- Bindings:
- reserved-memory: Support MTD/block device
- jedec,spi-nor: remove unneeded properties
- Extend fixed-partitions binding
- Add Sercomm (Suzhou) Corporation vendor prefix
MTD driver changes:
- st_spi_fsm: add missing clk_disable_unprepare() in stfsm_remove()
- phram:
- Allow cached mappings
- Allow probing via reserved-memory
- maps: ixp4xx: Drop driver
- bcm47xxpart: Print correct offset on read error
CFI driver changes:
- Rename chip_ready variables
- Add S29GL064N ID definition
- Use chip_ready() for write on S29GL064N
- Move and rename chip_check/chip_ready/chip_good_for_write
NAND core changes:
- Print offset instead of page number for bad blocks
Raw NAND controller drivers:
- Cadence: Fix possible null-ptr-deref in cadence_nand_dt_probe()
- CS553X: simplify the return expression of cs553x_write_ctrl_byte()
- Davinci: Remove redundant unsigned comparison to zero
- Denali: Use managed device resources
- GPMI:
- Add large oob bch setting support
- Rename the variable ecc_chunk_size
- Uninline the gpmi_check_ecc function
- Add strict ecc strength check
- Refactor BCH geometry settings function
- Intel: Fix possible null-ptr-deref in ebu_nand_probe()
- MPC5121: Check before clk_disable_unprepare() not needed
- Mtk:
- MTD_NAND_ECC_MEDIATEK should depend on ARCH_MEDIATEK
- Also parse the default nand-ecc-engine property if available
- Make mtk_ecc.c a separated module
- OMAP ELM:
- Convert the bindings to yaml
- Describe the bindings for AM64 ELM
- Add support for its compatible
- Renesas: Use runtime PM instead of the raw clock API and update the
bindings accordingly
- Rockchip: Check before clk_disable_unprepare() not needed
- TMIO: Check return value after calling platform_get_resource()
Raw NAND chip driver:
- Kioxia: Add support for TH58NVG3S0HBAI4 and TC58NVG0S3HTA00
SPI-NAND chip drivers:
- Gigadevice:
- Add support for:
- GD5FxGM7xExxG
- GD5F{2,4}GQ5xExxG
- GD5F1GQ5RExxG
- GD5FxGQ4xExxG
- Fix Quad IO for GD5F1GQ5UExxG
- XTX: Add support for XT26G0xA
SPI NOR core changes:
- Read back written SR value to make sure the write was done
correctly.
- Introduce a common function for Read ID that manufacturer drivers
can use to verify the Octal DTR switch worked correctly.
- Add helpers for read/write any register commands so manufacturer
drivers don't open code it every time.
- Clarify rdsr dummy cycles documentation.
- Add debugfs entry to expose internal flash parameters and state.
SPI NOR manufacturer drivers changes:
- Add support for Winbond W25Q512NW-IM, and Eon EN25QH256A.
- Move spi_nor_write_ear() to Winbond module since only Winbond
flashes use it.
- Rework Micron and Cypress Octal DTR enable methods to improve
readability.
- Use the common Read ID function to verify switch to Octal DTR mode
for Micron and Cypress flashes.
- Skip polling status on volatile register writes for Micron and
Cypress flashes since the operation is instant"
* tag 'mtd/for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (68 commits)
mtd: st_spi_fsm: add missing clk_disable_unprepare() in stfsm_remove()
dt-bindings: mtd: partitions: Extend fixed-partitions binding
dt-bindings: Add Sercomm (Suzhou) Corporation vendor prefix
mtd: phram: Allow cached mappings
mtd: call of_platform_populate() for MTD partitions
mtd: rawnand: renesas: Use runtime PM instead of the raw clock API
dt-bindings: mtd: renesas: Fix the NAND controller description
mtd: rawnand: mpc5121: Check before clk_disable_unprepare() not needed
mtd: rawnand: rockchip: Check before clk_disable_unprepare() not needed
mtd: nand: MTD_NAND_ECC_MEDIATEK should depend on ARCH_MEDIATEK
mtd: rawnand: cs553x: simplify the return expression of cs553x_write_ctrl_byte()
mtd: rawnand: kioxia: Add support for TH58NVG3S0HBAI4
mtd: spi-nor: debugfs: fix format specifier
mtd: spi-nor: support eon en25qh256a variant
mtd: spi-nor: winbond: add support for W25Q512NW-IM
mtd: spi-nor: expose internal parameters via debugfs
mtd: spi-nor: export spi_nor_hwcaps_pp2cmd()
mtd: spi-nor: move spi_nor_write_ear() to winbond module
mtd: spi-nor: amend the rdsr dummy cycles documentation
mtd: cfi_cmdset_0002: Rename chip_ready variables
...
- New drivers
- Driver for the Microchip LAN966x SoC
- PMBus driver for Infineon Digital Multi-phase xdp152 family controllers
- Chip support added to existing drivers
- asus-ec-sensors
- Support for ROG STRIX X570-E GAMING WIFI II, PRIME X470-PRO,
and ProArt X570 Creator WIFI
- External temperature sensor support for ASUS WS X570-ACE
- nct6775
- Support for I2C driver
- Support for ASUS PRO H410T / PRIME H410M-R / ROG X570-E GAMING WIFI II
- lm75
- Support for - Atmel AT30TS74
- pmbus/max16601
- Support for MAX16602
- aquacomputer_d5next
- Support for Aquacomputer Farbwerk
- Support for Aquacomputer Octo
- jc42
- Support for S-34TS04A
- Kernel API changes / clarifications
- The chip parameter of with_info API is now mandatory
- New hwmon_device_register_for_thermal API call for use by the thermal
subsystem
- Improvements
- PMBus and JC42 drivers now register with thermal subsystem
- PMBus drivers now support get_voltage/set_voltage power operations
- The adt7475 driver now supports pin configuration
- The lm90 driver now supports setting extended range temperatures
configuration with a devicetree property
- The dell-smm driver now registers as cooling device
- The OCC driver delays hwmon registration until requested by userspace
- Various other minor fixes and improvements
-----BEGIN PGP SIGNATURE-----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=LA2x
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New drivers:
- Driver for the Microchip LAN966x SoC
- PMBus driver for Infineon Digital Multi-phase xdp152 family
controllers
Chip support added to existing drivers:
- asus-ec-sensors:
- Support for ROG STRIX X570-E GAMING WIFI II, PRIME X470-PRO, and
ProArt X570 Creator WIFI
- External temperature sensor support for ASUS WS X570-ACE
- nct6775:
- Support for I2C driver
- Support for ASUS PRO H410T / PRIME H410M-R /
ROG X570-E GAMING WIFI II
- lm75:
- Support for - Atmel AT30TS74
- pmbus/max16601:
- Support for MAX16602
- aquacomputer_d5next:
- Support for Aquacomputer Farbwerk
- Support for Aquacomputer Octo
- jc42:
- Support for S-34TS04A
Kernel API changes / clarifications:
- The chip parameter of with_info API is now mandatory
- New hwmon_device_register_for_thermal API call for use by the
thermal subsystem
Improvements:
- PMBus and JC42 drivers now register with thermal subsystem
- PMBus drivers now support get_voltage/set_voltage power operations
- The adt7475 driver now supports pin configuration
- The lm90 driver now supports setting extended range temperatures
configuration with a devicetree property
- The dell-smm driver now registers as cooling device
- The OCC driver delays hwmon registration until requested by
userspace
... and various other minor fixes and improvements"
* tag 'hwmon-for-v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (71 commits)
hwmon: (aquacomputer_d5next) Fix an error handling path in aqc_probe()
hwmon: (sl28cpld) Fix typo in comment
hwmon: (pmbus) Check PEC support before reading other registers
hwmon: (dimmtemp) Fix bitmap handling
hwmon: (lm90) enable extended range according to DTS node
dt-bindings: hwmon: lm90: add ti,extended-range-enable property
dt-bindings: hwmon: lm90: add missing ti,tmp461
hwmon: (ibmaem) Directly use ida_alloc()/free()
hwmon: Directly use ida_alloc()/free()
hwmon: (asus-ec-sensors) fix Formula VIII definition
dt-bindings: trivial-devices: Add xdp152
hwmon: (sl28cpld-hwmon) Use HWMON_CHANNEL_INFO macro
hwmon: (pwm-fan) Use HWMON_CHANNEL_INFO macro
hwmon: (peci/dimmtemp) Use HWMON_CHANNEL_INFO macro
hwmon: (peci/cputemp) Use HWMON_CHANNEL_INFO macro
hwmon: (mr75203) Use HWMON_CHANNEL_INFO macro
hwmon: (ltc2992) Use HWMON_CHANNEL_INFO macro
hwmon: (as370-hwmon) Use HWMON_CHANNEL_INFO macro
hwmon: Make chip parameter for with_info API mandatory
thermal/drivers/thermal_hwmon: Use hwmon_device_register_for_thermal()
...
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQQdXVVFGN5XqKr1Hj7LwZzRsCrn5QUCYo0tOhQcem9oYXJAbGlu
dXguaWJtLmNvbQAKCRDLwZzRsCrn5QJfAP47Ym9vacLc1m8/MUaRA/QjbJ/8t3TX
h/4McK8kiRudxgD/RiPHII6gJ8q+qpBrYWJZ4ZZaHE8v0oA1viuZfbuN2wc=
=KQYi
-----END PGP SIGNATURE-----
Merge tag 'integrity-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull IMA updates from Mimi Zohar:
"New is IMA support for including fs-verity file digests and signatures
in the IMA measurement list as well as verifying the fs-verity file
digest based signatures, both based on policy.
In addition, are two bug fixes:
- avoid reading UEFI variables, which cause a page fault, on Apple
Macs with T2 chips.
- remove the original "ima" template Kconfig option to address a boot
command line ordering issue.
The rest is a mixture of code/documentation cleanup"
* tag 'integrity-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
integrity: Fix sparse warnings in keyring_handler
evm: Clean up some variables
evm: Return INTEGRITY_PASS for enum integrity_status value '0'
efi: Do not import certificates from UEFI Secure Boot for T2 Macs
fsverity: update the documentation
ima: support fs-verity file digest based version 3 signatures
ima: permit fsverity's file digests in the IMA measurement list
ima: define a new template field named 'd-ngv2' and templates
fs-verity: define a function to return the integrity protected file digest
ima: use IMA default hash algorithm for integrity violations
ima: fix 'd-ng' comments and documentation
ima: remove the IMA_TEMPLATE Kconfig option
ima: remove redundant initialization of pointer 'file'.
- Strictened validation of key hashes for SYSTEM_BLACKLIST_HASH_LIST. An
invalid hash format causes a compilation error. Previously, they got
included to the kernel binary but were silently ignored at run-time.
- Allow root user to append new hashes to the blacklist keyring.
- Trusted keys backed with Cryptographic Acceleration and Assurance Module
(CAAM), which part of some of the new NXP's SoC's. Now there is total
three hardware backends for trusted keys: TPM, ARM TEE and CAAM.
- A scattered set of fixes and small improvements for the TPM driver.
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
-----BEGIN PGP SIGNATURE-----
iIgEABYIADAWIQRE6pSOnaBC00OEHEIaerohdGur0gUCYoux6xIcamFya2tvQGtl
cm5lbC5vcmcACgkQGnq6IXRrq9LTQgEA4zRrlmLPjhZ1iZpPZiyBBv5eOx20/c+y
R7tCfJFB2+ABAOT1E885vt+GgKTY4mYloHJ+ZtnTIf1QRMP6EoSX+TwP
=oBOO
-----END PGP SIGNATURE-----
Merge tag 'tpmdd-next-v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm updates from Jarkko Sakkinen:
- Tightened validation of key hashes for SYSTEM_BLACKLIST_HASH_LIST. An
invalid hash format causes a compilation error. Previously, they got
included to the kernel binary but were silently ignored at run-time.
- Allow root user to append new hashes to the blacklist keyring.
- Trusted keys backed with Cryptographic Acceleration and Assurance
Module (CAAM), which part of some of the new NXP's SoC's. Now there
is total three hardware backends for trusted keys: TPM, ARM TEE and
CAAM.
- A scattered set of fixes and small improvements for the TPM driver.
* tag 'tpmdd-next-v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
MAINTAINERS: add KEYS-TRUSTED-CAAM
doc: trusted-encrypted: describe new CAAM trust source
KEYS: trusted: Introduce support for NXP CAAM-based trusted keys
crypto: caam - add in-kernel interface for blob generator
crypto: caam - determine whether CAAM supports blob encap/decap
KEYS: trusted: allow use of kernel RNG for key material
KEYS: trusted: allow use of TEE as backend without TCG_TPM support
tpm: Add field upgrade mode support for Infineon TPM2 modules
tpm: Fix buffer access in tpm2_get_tpm_pt()
char: tpm: cr50_i2c: Suppress duplicated error message in .remove()
tpm: cr50: Add new device/vendor ID 0x504a6666
tpm: Remove read16/read32/write32 calls from tpm_tis_phy_ops
tpm: ibmvtpm: Correct the return value in tpm_ibmvtpm_probe()
tpm/tpm_ftpm_tee: Return true/false (not 1/0) from bool functions
certs: Explain the rationale to call panic()
certs: Allow root user to append signed hashes to the blacklist keyring
certs: Check that builtin blacklist hashes are valid
certs: Make blacklist_vet_description() more strict
certs: Factor out the blacklist hash creation
tools/certs: Add print-cert-tbs-hash.sh
Important changes:
* improve the path_rename LSM hook implementations for RENAME_EXCHANGE;
* fix a too-restrictive filesystem control for a rare corner case;
* set the nested sandbox limitation to 16 layers;
* add a new LANDLOCK_ACCESS_FS_REFER access right to properly handle
file reparenting (i.e. full rename and link support);
* add new tests and documentation;
* format code with clang-format to make it easier to maintain and
contribute.
Related patch series:
* [PATCH v1 0/7] Landlock: Clean up coding style with clang-format
https://lore.kernel.org/r/20220506160513.523257-1-mic@digikod.net
* [PATCH v2 00/10] Minor Landlock fixes and new tests
https://lore.kernel.org/r/20220506160820.524344-1-mic@digikod.net
* [PATCH v3 00/12] Landlock: file linking and renaming support
https://lore.kernel.org/r/20220506161102.525323-1-mic@digikod.net
* [PATCH v2] landlock: Explain how to support Landlock
https://lore.kernel.org/r/20220513112743.156414-1-mic@digikod.net
-----BEGIN PGP SIGNATURE-----
iIYEABYIAC4WIQSVyBthFV4iTW/VU1/l49DojIL20gUCYousmBAcbWljQGRpZ2lr
b2QubmV0AAoJEOXj0OiMgvbSWToA/32m9xJhfppiTBHqw6Dt47v4sjuE/3ScwO/O
40rzaqs3AQD8AWHeqvPuM2lwPp1NQS4mcfv7K3DSCGBbUjHqdcl3Aw==
=+tJO
-----END PGP SIGNATURE-----
Merge tag 'landlock-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull Landlock updates from Mickaël Salaün:
- improve the path_rename LSM hook implementations for RENAME_EXCHANGE;
- fix a too-restrictive filesystem control for a rare corner case;
- set the nested sandbox limitation to 16 layers;
- add a new LANDLOCK_ACCESS_FS_REFER access right to properly handle
file reparenting (i.e. full rename and link support);
- add new tests and documentation;
- format code with clang-format to make it easier to maintain and
contribute.
* tag 'landlock-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux: (30 commits)
landlock: Explain how to support Landlock
landlock: Add design choices documentation for filesystem access rights
landlock: Document good practices about filesystem policies
landlock: Document LANDLOCK_ACCESS_FS_REFER and ABI versioning
samples/landlock: Add support for file reparenting
selftests/landlock: Add 11 new test suites dedicated to file reparenting
landlock: Add support for file reparenting with LANDLOCK_ACCESS_FS_REFER
LSM: Remove double path_rename hook calls for RENAME_EXCHANGE
landlock: Move filesystem helpers and add a new one
landlock: Fix same-layer rule unions
landlock: Create find_rule() from unmask_layers()
landlock: Reduce the maximum number of layers to 16
landlock: Define access_mask_t to enforce a consistent access mask size
selftests/landlock: Test landlock_create_ruleset(2) argument check ordering
landlock: Change landlock_restrict_self(2) check ordering
landlock: Change landlock_add_rule(2) argument check ordering
selftests/landlock: Add tests for O_PATH
selftests/landlock: Fully test file rename with "remove" access
selftests/landlock: Extend access right tests to directories
selftests/landlock: Add tests for unknown access rights
...
-----BEGIN PGP SIGNATURE-----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=1ZFj
-----END PGP SIGNATURE-----
Merge tag 'selinux-pr-20220523' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux updates from Paul Moore:
"We've got twelve patches queued for v5.19, with most being fairly
minor. The highlights are below:
- The checkreqprot and runtime disable knobs have been deprecated for
some time with no active users that we can find. In an effort to
move things along we are adding a pause when the knobs are used to
help make the deprecation more noticeable in case anyone is still
using these hacks in the shadows.
- We've added the anonymous inode class name to the AVC audit records
when anonymous inodes are involved. This should make writing policy
easier when anonymous inodes are involved.
- More constification work. This is fairly straightforward and the
source of most of the diffstat.
- The usual minor cleanups: remove unnecessary assignments, assorted
style/checkpatch fixes, kdoc fixes, macro while-loop
encapsulations, #include tweaks, etc"
* tag 'selinux-pr-20220523' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
security: declare member holding string literal const
selinux: log anon inode class name
selinux: declare data arrays const
selinux: fix indentation level of mls_ops block
selinux: include necessary headers in headers
selinux: avoid extra semicolon
selinux: update parameter documentation
selinux: resolve checkpatch errors
selinux: don't sleep when CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE is true
selinux: checkreqprot is deprecated, add some ssleep() discomfort
selinux: runtime disable is deprecated, add some ssleep() discomfort
selinux: Remove redundant assignments
A couple small cleanups for fs/verity/.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCYosv7hQcZWJpZ2dlcnNA
Z29vZ2xlLmNvbQAKCRDzXCl4vpKOK/UUAQCFP7hbXhEWsL7GdlC/mbj37xt5eqZl
Ezlkci0QZhi84QD7BeiTLaS5gwu4zWdNOL7zPawnA6+7tGuZjvphPNCvbAc=
=q5iZ
-----END PGP SIGNATURE-----
Merge tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt
Pull fsverity updates from Eric Biggers:
"A couple small cleanups for fs/verity/"
* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
fs-verity: Use struct_size() helper in enable_verity()
fs-verity: remove unused parameter desc_size in fsverity_create_info()
Some cleanups for fs/crypto/:
- Split up the misleadingly-named FS_CRYPTO_BLOCK_SIZE constant.
- Consistently report the encryption implementation that is being used.
- Add helper functions for the test_dummy_encryption mount option that
work properly with the new mount API. ext4 and f2fs will use these.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCYosv0xQcZWJpZ2dlcnNA
Z29vZ2xlLmNvbQAKCRDzXCl4vpKOK17XAP0bsA+vaVC/r408kPVZKdbN/aekFJa6
u81cTj2Yn1qylAEA4/3BXmjZerHF496lfFZCk7VpnN/3l5YOig2k1TECqQ8=
=Glr9
-----END PGP SIGNATURE-----
Merge tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt
Pull fscrypt updates from Eric Biggers:
"Some cleanups for fs/crypto/:
- Split up the misleadingly-named FS_CRYPTO_BLOCK_SIZE constant.
- Consistently report the encryption implementation that is being
used.
- Add helper functions for the test_dummy_encryption mount option
that work properly with the new mount API. ext4 and f2fs will use
these"
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
fscrypt: add new helper functions for test_dummy_encryption
fscrypt: factor out fscrypt_policy_to_key_spec()
fscrypt: log when starting to use inline encryption
fscrypt: split up FS_CRYPTO_BLOCK_SIZE
-----BEGIN PGP SIGNATURE-----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=SUr3
-----END PGP SIGNATURE-----
Merge tag 'random-5.19-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator updates from Jason Donenfeld:
"These updates continue to refine the work began in 5.17 and 5.18 of
modernizing the RNG's crypto and streamlining and documenting its
code.
New for 5.19, the updates aim to improve entropy collection methods
and make some initial decisions regarding the "premature next" problem
and our threat model. The cloc utility now reports that random.c is
931 lines of code and 466 lines of comments, not that basic metrics
like that mean all that much, but at the very least it tells you that
this is very much a manageable driver now.
Here's a summary of the various updates:
- The random_get_entropy() function now always returns something at
least minimally useful. This is the primary entropy source in most
collectors, which in the best case expands to something like RDTSC,
but prior to this change, in the worst case it would just return 0,
contributing nothing. For 5.19, additional architectures are wired
up, and architectures that are entirely missing a cycle counter now
have a generic fallback path, which uses the highest resolution
clock available from the timekeeping subsystem.
Some of those clocks can actually be quite good, despite the CPU
not having a cycle counter of its own, and going off-core for a
stamp is generally thought to increase jitter, something positive
from the perspective of entropy gathering. Done very early on in
the development cycle, this has been sitting in next getting some
testing for a while now and has relevant acks from the archs, so it
should be pretty well tested and fine, but is nonetheless the thing
I'll be keeping my eye on most closely.
- Of particular note with the random_get_entropy() improvements is
MIPS, which, on CPUs that lack the c0 count register, will now
combine the high-speed but short-cycle c0 random register with the
lower-speed but long-cycle generic fallback path.
- With random_get_entropy() now always returning something useful,
the interrupt handler now collects entropy in a consistent
construction.
- Rather than comparing two samples of random_get_entropy() for the
jitter dance, the algorithm now tests many samples, and uses the
amount of differing ones to determine whether or not jitter entropy
is usable and how laborious it must be. The problem with comparing
only two samples was that if the cycle counter was extremely slow,
but just so happened to be on the cusp of a change, the slowness
wouldn't be detected. Taking many samples fixes that to some
degree.
This, combined with the other improvements to random_get_entropy(),
should make future unification of /dev/random and /dev/urandom
maybe more possible. At the very least, were we to attempt it again
today (we're not), it wouldn't break any of Guenter's test rigs
that broke when we tried it with 5.18. So, not today, but perhaps
down the road, that's something we can revisit.
- We attempt to reseed the RNG immediately upon waking up from system
suspend or hibernation, making use of the various timestamps about
suspend time and such available, as well as the usual inputs such
as RDRAND when available.
- Batched randomness now falls back to ordinary randomness before the
RNG is initialized. This provides more consistent guarantees to the
types of random numbers being returned by the various accessors.
- The "pre-init injection" code is now gone for good. I suspect you
in particular will be happy to read that, as I recall you
expressing your distaste for it a few months ago. Instead, to avoid
a "premature first" issue, while still allowing for maximal amount
of entropy availability during system boot, the first 128 bits of
estimated entropy are used immediately as it arrives, with the next
128 bits being buffered. And, as before, after the RNG has been
fully initialized, it winds up reseeding anyway a few seconds later
in most cases. This resulted in a pretty big simplification of the
initialization code and let us remove various ad-hoc mechanisms
like the ugly crng_pre_init_inject().
- The RNG no longer pretends to handle the "premature next" security
model, something that various academics and other RNG designs have
tried to care about in the past. After an interesting mailing list
thread, these issues are thought to be a) mainly academic and not
practical at all, and b) actively harming the real security of the
RNG by delaying new entropy additions after a potential compromise,
making a potentially bad situation even worse. As well, in the
first place, our RNG never even properly handled the premature next
issue, so removing an incomplete solution to a fake problem was
particularly nice.
This allowed for numerous other simplifications in the code, which
is a lot cleaner as a consequence. If you didn't see it before,
https://lore.kernel.org/lkml/YmlMGx6+uigkGiZ0@zx2c4.com/ may be a
thread worth skimming through.
- While the interrupt handler received a separate code path years ago
that avoids locks by using per-cpu data structures and a faster
mixing algorithm, in order to reduce interrupt latency, input and
disk events that are triggered in hardirq handlers were still
hitting locks and more expensive algorithms. Those are now
redirected to use the faster per-cpu data structures.
- Rather than having the fake-crypto almost-siphash-based random32
implementation be used right and left, and in many places where
cryptographically secure randomness is desirable, the batched
entropy code is now fast enough to replace that.
- As usual, numerous code quality and documentation cleanups. For
example, the initialization state machine now uses enum symbolic
constants instead of just hard coding numbers everywhere.
- Since the RNG initializes once, and then is always initialized
thereafter, a pretty heavy amount of code used during that
initialization is never used again. It is now completely cordoned
off using static branches and it winds up in the .text.unlikely
section so that it doesn't reduce cache compactness after the RNG
is ready.
- A variety of functions meant for waiting on the RNG to be
initialized were only used by vsprintf, and in not a particularly
optimal way. Replacing that usage with a more ordinary setup made
it possible to remove those functions.
- A cleanup of how we warn userspace about the use of uninitialized
/dev/urandom and uninitialized get_random_bytes() usage.
Interestingly, with the change you merged for 5.18 that attempts to
use jitter (but does not block if it can't), the majority of users
should never see those warnings for /dev/urandom at all now, and
the one for in-kernel usage is mainly a debug thing.
- The file_operations struct for /dev/[u]random now implements
.read_iter and .write_iter instead of .read and .write, allowing it
to also implement .splice_read and .splice_write, which makes
splice(2) work again after it was broken here (and in many other
places in the tree) during the set_fs() removal. This was a bit of
a last minute arrival from Jens that hasn't had as much time to
bake, so I'll be keeping my eye on this as well, but it seems
fairly ordinary. Unfortunately, read_iter() is around 3% slower
than read() in my tests, which I'm not thrilled about. But Jens and
Al, spurred by this observation, seem to be making progress in
removing the bottlenecks on the iter paths in the VFS layer in
general, which should remove the performance gap for all drivers.
- Assorted other bug fixes, cleanups, and optimizations.
- A small SipHash cleanup"
* tag 'random-5.19-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: (49 commits)
random: check for signals after page of pool writes
random: wire up fops->splice_{read,write}_iter()
random: convert to using fops->write_iter()
random: convert to using fops->read_iter()
random: unify batched entropy implementations
random: move randomize_page() into mm where it belongs
random: remove mostly unused async readiness notifier
random: remove get_random_bytes_arch() and add rng_has_arch_random()
random: move initialization functions out of hot pages
random: make consistent use of buf and len
random: use proper return types on get_random_{int,long}_wait()
random: remove extern from functions in header
random: use static branch for crng_ready()
random: credit architectural init the exact amount
random: handle latent entropy and command line from random_init()
random: use proper jiffies comparison macro
random: remove ratelimiting for in-kernel unseeded randomness
random: move initialization out of reseeding hot path
random: avoid initializing twice in credit race
random: use symbolic constants for crng_init states
...
KGDB and KDB allow read and write access to kernel memory, and thus
should be restricted during lockdown. An attacker with access to a
serial port (for example, via a hypervisor console, which some cloud
vendors provide over the network) could trigger the debugger so it is
important that the debugger respect the lockdown mode when/if it is
triggered.
Fix this by integrating lockdown into kdb's existing permissions
mechanism. Unfortunately kgdb does not have any permissions mechanism
(although it certainly could be added later) so, for now, kgdb is simply
and brutally disabled by immediately exiting the gdb stub without taking
any action.
For lockdowns established early in the boot (e.g. the normal case) then
this should be fine but on systems where kgdb has set breakpoints before
the lockdown is enacted than "bad things" will happen.
CVE: CVE-2022-21499
Co-developed-by: Stephen Brennan <stephen.s.brennan@oracle.com>
Signed-off-by: Stephen Brennan <stephen.s.brennan@oracle.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Platform PMU changes:
=====================
- x86/intel:
- Add new Intel Alder Lake and Raptor Lake support
- x86/amd:
- AMD Zen4 IBS extensions support
- Add AMD PerfMonV2 support
- Add AMD Fam19h Branch Sampling support
Generic changes:
================
- signal: Deliver SIGTRAP on perf event asynchronously if blocked
Perf instrumentation can be driven via SIGTRAP, but this causes a problem
when SIGTRAP is blocked by a task & terminate the task.
Allow user-space to request these signals asynchronously (after they get
unblocked) & also give the information to the signal handler when this
happens:
" To give user space the ability to clearly distinguish synchronous from
asynchronous signals, introduce siginfo_t::si_perf_flags and
TRAP_PERF_FLAG_ASYNC (opted for flags in case more binary information is
required in future).
The resolution to the problem is then to (a) no longer force the signal
(avoiding the terminations), but (b) tell user space via si_perf_flags
if the signal was synchronous or not, so that such signals can be
handled differently (e.g. let user space decide to ignore or consider
the data imprecise). "
- Unify/standardize the /sys/devices/cpu/events/* output format.
- Misc fixes & cleanups.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=UqYA
-----END PGP SIGNATURE-----
Merge tag 'perf-core-2022-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf events updates from Ingo Molnar:
"Platform PMU changes:
- x86/intel:
- Add new Intel Alder Lake and Raptor Lake support
- x86/amd:
- AMD Zen4 IBS extensions support
- Add AMD PerfMonV2 support
- Add AMD Fam19h Branch Sampling support
Generic changes:
- signal: Deliver SIGTRAP on perf event asynchronously if blocked
Perf instrumentation can be driven via SIGTRAP, but this causes a
problem when SIGTRAP is blocked by a task & terminate the task.
Allow user-space to request these signals asynchronously (after
they get unblocked) & also give the information to the signal
handler when this happens:
"To give user space the ability to clearly distinguish
synchronous from asynchronous signals, introduce
siginfo_t::si_perf_flags and TRAP_PERF_FLAG_ASYNC (opted for
flags in case more binary information is required in future).
The resolution to the problem is then to (a) no longer force the
signal (avoiding the terminations), but (b) tell user space via
si_perf_flags if the signal was synchronous or not, so that such
signals can be handled differently (e.g. let user space decide
to ignore or consider the data imprecise). "
- Unify/standardize the /sys/devices/cpu/events/* output format.
- Misc fixes & cleanups"
* tag 'perf-core-2022-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (32 commits)
perf/x86/amd/core: Fix reloading events for SVM
perf/x86/amd: Run AMD BRS code only on supported hw
perf/x86/amd: Fix AMD BRS period adjustment
perf/x86/amd: Remove unused variable 'hwc'
perf/ibs: Fix comment
perf/amd/ibs: Advertise zen4_ibs_extensions as pmu capability attribute
perf/amd/ibs: Add support for L3 miss filtering
perf/amd/ibs: Use ->is_visible callback for dynamic attributes
perf/amd/ibs: Cascade pmu init functions' return value
perf/x86/uncore: Add new Alder Lake and Raptor Lake support
perf/x86/uncore: Clean up uncore_pci_ids[]
perf/x86/cstate: Add new Alder Lake and Raptor Lake support
perf/x86/msr: Add new Alder Lake and Raptor Lake support
perf/x86: Add new Alder Lake and Raptor Lake support
perf/amd/ibs: Use interrupt regs ip for stack unwinding
perf/x86/amd/core: Add PerfMonV2 overflow handling
perf/x86/amd/core: Add PerfMonV2 counter control
perf/x86/amd/core: Detect available counters
perf/x86/amd/core: Detect PerfMonV2 support
x86/msr: Add PerfCntrGlobal* registers
...
- Comprehensive interface overhaul:
=================================
Objtool's interface has some issues:
- Several features are done unconditionally, without any way to turn
them off. Some of them might be surprising. This makes objtool
tricky to use, and prevents porting individual features to other
arches.
- The config dependencies are too coarse-grained. Objtool enablement is
tied to CONFIG_STACK_VALIDATION, but it has several other features
independent of that.
- The objtool subcmds ("check" and "orc") are clumsy: "check" is really
a subset of "orc", so it has all the same options. The subcmd model
has never really worked for objtool, as it only has a single purpose:
"do some combination of things on an object file".
- The '--lto' and '--vmlinux' options are nonsensical and have
surprising behavior.
Overhaul the interface:
- get rid of subcmds
- make all features individually selectable
- remove and/or clarify confusing/obsolete options
- update the documentation
- fix some bugs found along the way
- Fix x32 regression
- Fix Kbuild cleanup bugs
- Add scripts/objdump-func helper script to disassemble a single function from an object file.
- Rewrite scripts/faddr2line to be section-aware, by basing it on 'readelf',
moving it away from 'nm', which doesn't handle multiple sections well,
which can result in decoding failure.
- Rewrite & fix symbol handling - which had a number of bugs wrt. object files
that don't have global symbols - which is rare but possible. Also fix a
bunch of symbol handling bugs found along the way.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=ARdm
-----END PGP SIGNATURE-----
Merge tag 'objtool-core-2022-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Ingo Molnar:
- Comprehensive interface overhaul:
=================================
Objtool's interface has some issues:
- Several features are done unconditionally, without any way to
turn them off. Some of them might be surprising. This makes
objtool tricky to use, and prevents porting individual features
to other arches.
- The config dependencies are too coarse-grained. Objtool
enablement is tied to CONFIG_STACK_VALIDATION, but it has several
other features independent of that.
- The objtool subcmds ("check" and "orc") are clumsy: "check" is
really a subset of "orc", so it has all the same options.
The subcmd model has never really worked for objtool, as it only
has a single purpose: "do some combination of things on an object
file".
- The '--lto' and '--vmlinux' options are nonsensical and have
surprising behavior.
Overhaul the interface:
- get rid of subcmds
- make all features individually selectable
- remove and/or clarify confusing/obsolete options
- update the documentation
- fix some bugs found along the way
- Fix x32 regression
- Fix Kbuild cleanup bugs
- Add scripts/objdump-func helper script to disassemble a single
function from an object file.
- Rewrite scripts/faddr2line to be section-aware, by basing it on
'readelf', moving it away from 'nm', which doesn't handle multiple
sections well, which can result in decoding failure.
- Rewrite & fix symbol handling - which had a number of bugs wrt.
object files that don't have global symbols - which is rare but
possible. Also fix a bunch of symbol handling bugs found along the
way.
* tag 'objtool-core-2022-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
objtool: Fix objtool regression on x32 systems
objtool: Fix symbol creation
scripts/faddr2line: Fix overlapping text section failures
scripts: Create objdump-func helper script
objtool: Remove libsubcmd.a when make clean
objtool: Remove inat-tables.c when make clean
objtool: Update documentation
objtool: Remove --lto and --vmlinux in favor of --link
objtool: Add HAVE_NOINSTR_VALIDATION
objtool: Rename "VMLINUX_VALIDATION" -> "NOINSTR_VALIDATION"
objtool: Make noinstr hacks optional
objtool: Make jump label hack optional
objtool: Make static call annotation optional
objtool: Make stack validation frame-pointer-specific
objtool: Add CONFIG_OBJTOOL
objtool: Extricate sls from stack validation
objtool: Rework ibt and extricate from stack validation
objtool: Make stack validation optional
objtool: Add option to print section addresses
objtool: Don't print parentheses in function addresses
...
- rwsem cleanups & optimizations/fixes:
- Conditionally wake waiters in reader/writer slowpaths
- Always try to wake waiters in out_nolock path
- Add try_cmpxchg64() implementation, with arch optimizations - and use it to
micro-optimize sched_clock_{local,remote}()
- Various force-inlining fixes to address objdump instrumentation-check warnings
- Add lock contention tracepoints:
lock:contention_begin
lock:contention_end
- Misc smaller fixes & cleanups
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=gaS5
-----END PGP SIGNATURE-----
Merge tag 'locking-core-2022-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
- rwsem cleanups & optimizations/fixes:
- Conditionally wake waiters in reader/writer slowpaths
- Always try to wake waiters in out_nolock path
- Add try_cmpxchg64() implementation, with arch optimizations - and use
it to micro-optimize sched_clock_{local,remote}()
- Various force-inlining fixes to address objdump instrumentation-check
warnings
- Add lock contention tracepoints:
lock:contention_begin
lock:contention_end
- Misc smaller fixes & cleanups
* tag 'locking-core-2022-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/clock: Use try_cmpxchg64 in sched_clock_{local,remote}
locking/atomic/x86: Introduce arch_try_cmpxchg64
locking/atomic: Add generic try_cmpxchg64 support
futex: Remove a PREEMPT_RT_FULL reference.
locking/qrwlock: Change "queue rwlock" to "queued rwlock"
lockdep: Delete local_irq_enable_in_hardirq()
locking/mutex: Make contention tracepoints more consistent wrt adaptive spinning
locking: Apply contention tracepoints in the slow path
locking: Add lock contention tracepoints
locking/rwsem: Always try to wake waiters in out_nolock path
locking/rwsem: Conditionally wake waiters in reader/writer slowpaths
locking/rwsem: No need to check for handoff bit if wait queue empty
lockdep: Fix -Wunused-parameter for _THIS_IP_
x86/mm: Force-inline __phys_addr_nodebug()
x86/kvm/svm: Force-inline GHCB accessors
task_stack, x86/cea: Force-inline stack helpers
Commit 87c9ce3ffec9 ("zonefs: Add active seq file accounting") wrongly
changed zonefs_init_file_inode() to always return 0 even if the call to
zonefs_zone_mgmt() fails. Fix this by propagating zonefs_zone_mgmt()
return value as the return value for zonefs_init_file_inode().
Fixes: 87c9ce3ffec9 ("zonefs: Add active seq file accounting")
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
- Initial support for the ARMv9 Scalable Matrix Extension (SME). SME
takes the approach used for vectors in SVE and extends this to provide
architectural support for matrix operations. No KVM support yet, SME
is disabled in guests.
- Support for crashkernel reservations above ZONE_DMA via the
'crashkernel=X,high' command line option.
- btrfs search_ioctl() fix for live-lock with sub-page faults.
- arm64 perf updates: support for the Hisilicon "CPA" PMU for monitoring
coherent I/O traffic, support for Arm's CMN-650 and CMN-700
interconnect PMUs, minor driver fixes, kerneldoc cleanup.
- Kselftest updates for SME, BTI, MTE.
- Automatic generation of the system register macros from a 'sysreg'
file describing the register bitfields.
- Update the type of the function argument holding the ESR_ELx register
value to unsigned long to match the architecture register size
(originally 32-bit but extended since ARMv8.0).
- stacktrace cleanups.
- ftrace cleanups.
- Miscellaneous updates, most notably: arm64-specific huge_ptep_get(),
avoid executable mappings in kexec/hibernate code, drop TLB flushing
from get_clear_flush() (and rename it to get_clear_contig()),
ARCH_NR_GPIO bumped to 2048 for ARCH_APPLE.
-----BEGIN PGP SIGNATURE-----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=0DjE
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
- Initial support for the ARMv9 Scalable Matrix Extension (SME).
SME takes the approach used for vectors in SVE and extends this to
provide architectural support for matrix operations. No KVM support
yet, SME is disabled in guests.
- Support for crashkernel reservations above ZONE_DMA via the
'crashkernel=X,high' command line option.
- btrfs search_ioctl() fix for live-lock with sub-page faults.
- arm64 perf updates: support for the Hisilicon "CPA" PMU for
monitoring coherent I/O traffic, support for Arm's CMN-650 and
CMN-700 interconnect PMUs, minor driver fixes, kerneldoc cleanup.
- Kselftest updates for SME, BTI, MTE.
- Automatic generation of the system register macros from a 'sysreg'
file describing the register bitfields.
- Update the type of the function argument holding the ESR_ELx register
value to unsigned long to match the architecture register size
(originally 32-bit but extended since ARMv8.0).
- stacktrace cleanups.
- ftrace cleanups.
- Miscellaneous updates, most notably: arm64-specific huge_ptep_get(),
avoid executable mappings in kexec/hibernate code, drop TLB flushing
from get_clear_flush() (and rename it to get_clear_contig()),
ARCH_NR_GPIO bumped to 2048 for ARCH_APPLE.
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (145 commits)
arm64/sysreg: Generate definitions for FAR_ELx
arm64/sysreg: Generate definitions for DACR32_EL2
arm64/sysreg: Generate definitions for CSSELR_EL1
arm64/sysreg: Generate definitions for CPACR_ELx
arm64/sysreg: Generate definitions for CONTEXTIDR_ELx
arm64/sysreg: Generate definitions for CLIDR_EL1
arm64/sve: Move sve_free() into SVE code section
arm64: Kconfig.platforms: Add comments
arm64: Kconfig: Fix indentation and add comments
arm64: mm: avoid writable executable mappings in kexec/hibernate code
arm64: lds: move special code sections out of kernel exec segment
arm64/hugetlb: Implement arm64 specific huge_ptep_get()
arm64/hugetlb: Use ptep_get() to get the pte value of a huge page
arm64: kdump: Do not allocate crash low memory if not needed
arm64/sve: Generate ZCR definitions
arm64/sme: Generate defintions for SVCR
arm64/sme: Generate SMPRI_EL1 definitions
arm64/sme: Automatically generate SMPRIMAP_EL2 definitions
arm64/sme: Automatically generate SMIDR_EL1 defines
arm64/sme: Automatically generate defines for SMCR
...
- Make use of the IBM z16 processor activity instrumentation facility
to count cryptography operations: add a new PMU device driver so
that perf can make use of this.
- Add new IBM z16 extended counter set to cpumf support.
- Add vdso randomization support.
- Add missing KCSAN instrumentation to barriers and spinlocks, which
should make s390's KCSAN support complete.
- Add support for IPL-complete-control facility: notify the hypervisor
that kexec finished work and the kernel starts.
- Improve error logging for PCI.
- Various small changes to workaround llvm's integrated assembler
limitations, and one bug, to make it finally possible to compile the
kernel with llvm's integrated assembler. This also requires to raise
the minimum clang version to 14.0.0.
- Various other small enhancements, bug fixes, and cleanups all over
the place.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEECMNfWEw3SLnmiLkZIg7DeRspbsIFAmKLedYACgkQIg7DeRsp
bsKDfA//TR/8jyyrNs75VDUPiS0UgMgHfjinQqLa8qwaQxCxA0J31I9nYiDxSfp/
E8hTCLyARnPX0YpcLCEI0ChC6Ad+LElGr6kctdV0FTQopRVreVRKYe2bmrsvXNqs
4OzFNGZ8mnvMMSi1IQ/A7Yq/DZjbEON5VfY3iJv8djyC7qVNDgngdiQxtIJ+3eq/
77pw3VEgtuI2lVC3O9fEsdqRUyB5UHS3GSknmc8+KuRmOorir0JwMvxQ9xARZJYE
6FbTnSDW1YGI6TBoa/zFberqsldU/qJzo40JmPr27a2qbEmysc8kw60r+cIFsxgC
H432/aS9102CnsocaY7CtOvs+TLAK8dYeU31enxUGXnICMJ0MuuqnNnAfHrJziVs
ZnK3iUfPmMMewYfSefn8Sk87kJR5ggGePF++44GEqd87lRwZUnC+hd19dNtzzgSx
Br4dRYrdQl+w2nqBHGCGW2288svtiPHslnhaQqy343fS9q0o3Mebqx1e9be7t9/K
IDFQ00Cd3FS2jhphCbCrq2vJTmByhTQqCiNoEJ6vZK2B3ksrJUotfdwI+5etE2Kj
8sOPwOPyIAI9HnXFVknGIl/u5kaPuHazkZu6u3Or0miVZYw01pov1am0ArcFjeMX
/4Js/lI4O/wXvRzVk0rILrAZFDirAHvqqx+aI20cegTQU2C8mHY=
=W+1k
-----END PGP SIGNATURE-----
Merge tag 's390-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Heiko Carstens:
- Make use of the IBM z16 processor activity instrumentation facility
to count cryptography operations: add a new PMU device driver so that
perf can make use of this.
- Add new IBM z16 extended counter set to cpumf support.
- Add vdso randomization support.
- Add missing KCSAN instrumentation to barriers and spinlocks, which
should make s390's KCSAN support complete.
- Add support for IPL-complete-control facility: notify the hypervisor
that kexec finished work and the kernel starts.
- Improve error logging for PCI.
- Various small changes to workaround llvm's integrated assembler
limitations, and one bug, to make it finally possible to compile the
kernel with llvm's integrated assembler. This also requires to raise
the minimum clang version to 14.0.0.
- Various other small enhancements, bug fixes, and cleanups all over
the place.
* tag 's390-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (48 commits)
s390/head: get rid of 31 bit leftovers
scripts/min-tool-version.sh: raise minimum clang version to 14.0.0 for s390
s390/boot: do not emit debug info for assembly with llvm's IAS
s390/boot: workaround llvm IAS bug
s390/purgatory: workaround llvm's IAS limitations
s390/entry: workaround llvm's IAS limitations
s390/alternatives: remove padding generation code
s390/alternatives: provide identical sized orginal/alternative sequences
s390/cpumf: add new extended counter set for IBM z16
s390/preempt: disable __preempt_count_add() optimization for PROFILE_ALL_BRANCHES
s390/stp: clock_delta should be signed
s390/stp: fix todoff size
s390/pai: add support for cryptography counters
entry: Rename arch_check_user_regs() to arch_enter_from_user_mode()
s390/compat: cleanup compat_linux.h header file
s390/entry: remove broken and not needed code
s390/boot: convert parmarea to C
s390/boot: convert initial lowcore to C
s390/ptrace: move short psw definitions to ptrace header file
s390/head: initialize all new psws
...
- Introduce virtual m68k machine based on Android Goldfish devices,
- Defconfig updates,
- Minor fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iIsEABYIADMWIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCYotRMhUcZ2VlcnRAbGlu
dXgtbTY4ay5vcmcACgkQisJQ/WRJ8XDFmgD/ZFTY4HashrodaQQLeRnwF1e2fDSY
yvpDfaJJf9vJY0kBAM/yflOMfPHeUOe1rLY0twevuZTgDUIv4f+Oi+9jtYUN
=ccFr
-----END PGP SIGNATURE-----
Merge tag 'm68k-for-v5.19-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
Pull m68k updates from Geert Uytterhoeven:
- Introduce virtual m68k machine based on Android Goldfish devices
- defconfig updates
- Minor fixes and improvements
* tag 'm68k-for-v5.19-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k: atari: Make Atari ROM port I/O write macros return void
m68k: math-emu: Fix dependencies of math emulation support
m68k: math-emu: Fix typos in comments
m68k: Wire up syscall_trace_enter/leave for m68k
m68k: defconfig: Update defconfigs for v5.18-rc1
m68k: Introduce a virtual m68k machine
clocksource/drivers: Add a goldfish-timer clocksource
rtc: goldfish: Use gf_ioread32()/gf_iowrite32()
tty: goldfish: Introduce gf_ioread32()/gf_iowrite32()
- support coprocessors on SMP
- support KCSAN
- support handling protection faults in noMMU configurations
- support using coprocessors in the kernel mode
- support hibernation
- enable context tracking
- enable HAVE_VIRT_CPU_ACCOUNTING_GEN
- support division by 0 exception on cores without HW division option
- clean up locking in the ISS network driver
- clean up kernel entry assemly code
- various minor fixes
-----BEGIN PGP SIGNATURE-----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=vQ/C
-----END PGP SIGNATURE-----
Merge tag 'xtensa-20220523' of https://github.com/jcmvbkbc/linux-xtensa
Pull xtensa architecture updates from Max Filippov:
- support coprocessors on SMP
- support KCSAN
- support handling protection faults in noMMU configurations
- support using coprocessors in the kernel mode
- support hibernation
- enable context tracking
- enable HAVE_VIRT_CPU_ACCOUNTING_GEN
- support division by 0 exception on cores without HW division option
- clean up locking in the ISS network driver
- clean up kernel entry assemly code
- various minor fixes
* tag 'xtensa-20220523' of https://github.com/jcmvbkbc/linux-xtensa: (36 commits)
xtensa: Return true/false (not 1/0) from bool function
xtensa: improve call0 ABI probing
xtensa: support artificial division by 0 exception
xtensa: add trap handler for division by zero
xtensa/simdisk: fix proc_read_simdisk()
xtensa: no need to initialise statics to 0
xtensa: clean up labels in the kernel entry assembly
xtensa: don't leave invalid TLB entry in fast_store_prohibited
xtensa: fix declaration of _SecondaryResetVector_text_*
irqchip: irq-xtensa-mx: fix initial IRQ affinity
xtensa: enable ARCH_HAS_DEBUG_VM_PGTABLE
xtensa: add hibernation support
xtensa: support coprocessors on SMP
xtensa: get rid of stack frame in coprocessor_flush
xtensa: merge SAVE_CP_REGS_TAB and LOAD_CP_REGS_TAB
xtensa: add xtensa_xsr macro
xtensa: handle coprocessor exceptions in kernel mode
xtensa: use callx0 opcode in fast_coprocessor
xtensa: clean up excsave1 initialization
xtensa: clean up declarations in coprocessor.h
...
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCYosaQAAKCRCAXGG7T9hj
vil9AP9b4C+f9LTG0kAinjxLPyWE0Mo/iq3gO60MteZ2HyeI+AD/eSzJioJA0vyH
4pnU/UaGLJSp/B1LitLdjwoWIvwcEws=
=pDcW
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.19-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
- decouple the PV interface from kernel internals in the Xen
scsifront/scsiback pv drivers
- harden the Xen scsifront PV driver against a malicious backend driver
- simplify Xen PV frontend driver ring page setup
- support Xen setups with multiple domains created at boot time to
tolerate Xenstore coming up late
- two small cleanup patches
* tag 'for-linus-5.19-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (29 commits)
xen: add support for initializing xenstore later as HVM domain
xen: sync xs_wire.h header with upstream xen
x86: xen: remove STACK_FRAME_NON_STANDARD from xen_cpuid
xen-blk{back,front}: Update contact points for buffer_squeeze_duration_ms and feature_persistent
xen/xenbus: eliminate xenbus_grant_ring()
xen/sndfront: use xenbus_setup_ring() and xenbus_teardown_ring()
xen/usbfront: use xenbus_setup_ring() and xenbus_teardown_ring()
xen/scsifront: use xenbus_setup_ring() and xenbus_teardown_ring()
xen/pcifront: use xenbus_setup_ring() and xenbus_teardown_ring()
xen/drmfront: use xenbus_setup_ring() and xenbus_teardown_ring()
xen/tpmfront: use xenbus_setup_ring() and xenbus_teardown_ring()
xen/netfront: use xenbus_setup_ring() and xenbus_teardown_ring()
xen/blkfront: use xenbus_setup_ring() and xenbus_teardown_ring()
xen/xenbus: add xenbus_setup_ring() service function
xen: update ring.h
xen/shbuf: switch xen-front-pgdir-shbuf to use INVALID_GRANT_REF
xen/dmabuf: switch gntdev-dmabuf to use INVALID_GRANT_REF
xen/sound: switch xen_snd_front to use INVALID_GRANT_REF
xen/drm: switch xen_drm_front to use INVALID_GRANT_REF
xen/usb: switch xen-hcd to use INVALID_GRANT_REF
...
Highlights:
- New drivers:
- Intel "In Field Scan" (IFS) support
- Winmate FM07/FM07P buttons
- Mellanox SN2201 support
- AMD PMC driver enhancements
- Lots of various other small fixes and hardware-id additions
The following is an automated git shortlog grouped by driver:
Documentation:
- In-Field Scan
Documentation/ABI:
- Add new attributes for mlxreg-io sysfs interfaces
- sysfs-class-firmware-attributes: Misc. cleanups
- sysfs-class-firmware-attributes: Fix Sphinx errors
- sysfs-driver-intel_sdsi: Fix sphinx warnings
acerhdf:
- Cleanup str_starts_with()
amd-pmc:
- Fix build error unused-function
- Shuffle location of amd_pmc_get_smu_version()
- Avoid reading SMU version at probe time
- Move FCH init to first use
- Move SMU logging setup out of init
- Fix compilation without CONFIG_SUSPEND
amd_hsmp:
- Add HSMP protocol version 5 messages
asus-nb-wmi:
- Add keymap for MyASUS key
asus-wmi:
- Update unknown code message
- Use kobj_to_dev()
- Fix driver not binding when fan curve control probe fails
- Potential buffer overflow in asus_wmi_evaluate_method_buf()
barco-p50-gpio:
- Fix duplicate included linux/io.h
dell-laptop:
- Add quirk entry for Latitude 7520
gigabyte-wmi:
- Add support for Z490 AORUS ELITE AC and X570 AORUS ELITE WIFI
- added support for B660 GAMING X DDR4 motherboard
hp-wmi:
- Correct code style related issues
intel-hid:
- fix _DSM function index handling
intel-uncore-freq:
- Prevent driver loading in guests
intel_cht_int33fe:
- Set driver data
platform/mellanox:
- Add support for new SN2201 system
platform/surface:
- aggregator: Fix initialization order when compiling as builtin module
- gpe: Add support for Surface Pro 8
platform/x86/dell:
- add buffer allocation/free functions for SMI calls
platform/x86/intel:
- Fix 'rmmod pmt_telemetry' panic
- pmc/core: Use kobj_to_dev()
- pmc/core: change pmc_lpm_modes to static
platform/x86/intel/ifs:
- Add CPU_SUP_INTEL dependency
- add ABI documentation for IFS
- Add IFS sysfs interface
- Add scan test support
- Authenticate and copy to secured memory
- Check IFS Image sanity
- Read IFS firmware image
- Add stub driver for In-Field Scan
platform/x86/intel/sdsi:
- Fix bug in multi packet reads
- Poll on ready bit for writes
- Handle leaky bucket
platform_data/mlxreg:
- Add field for notification callback
pmc_atom:
- dont export pmc_atom_read - no modular users
- remove unused pmc_atom_write()
samsung-laptop:
- use kobj_to_dev()
- Fix an unsigned comparison which can never be negative
stop_machine:
- Add stop_core_cpuslocked() for per-core operations
think-lmi:
- certificate support clean ups
thinkpad_acpi:
- Correct dual fan probe
- Add a s2idle resume quirk for a number of laptops
- Convert btusb DMI list to quirks
tools/power/x86/intel-speed-select:
- Fix warning for perf_cap.cpu
- Display error on turbo mode disabled
- fix build failure when using -Wl,--as-needed
toshiba_acpi:
- use kobj_to_dev()
trace:
- platform/x86/intel/ifs: Add trace point to track Intel IFS operations
winmate-fm07-keys:
- Winmate FM07/FM07P buttons
wmi:
- replace usage of found with dedicated list iterator variable
x86/microcode/intel:
- Expose collect_cpu_info_early() for IFS
x86/msr-index:
- Define INTEGRITY_CAPABILITIES MSR
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmKKlA0UHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9w0Iwf+PYoq7qtU6j6N2f8gL2s65JpKiSPP
CkgnCzTP+khvNnTWMQS8RW9VE6YrHXmN/+d3UAvRrHsOYm3nyZT5aPju9xJ6Xyfn
5ZdMVvYxz7cm3lC6ay8AQt0Cmy6im/+lzP5vA5K68IYh0fPX/dvuOU57pNvXYFfk
Yz5/Gm0t0C4CKVqkcdU/zkNawHP+2+SyQe+Ua2srz7S3DAqUci0lqLr/w9Xk2Yij
nCgEWFB1Qjd2NoyRRe44ksLQ0dXpD4ADDzED+KPp6VTGnw61Eznf9319Z5ONNa/O
VAaSCcDNKps8d3ZpfCpLb3Rs4ztBCkRnkLFczJBgPsBiuDmyTT2/yeEtNg==
=HdEG
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
"This includes some small changes to kernel/stop_machine.c and arch/x86
which are deps of the new Intel IFS support.
Highlights:
- New drivers:
- Intel "In Field Scan" (IFS) support
- Winmate FM07/FM07P buttons
- Mellanox SN2201 support
- AMD PMC driver enhancements
- Lots of various other small fixes and hardware-id additions"
* tag 'platform-drivers-x86-v5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (54 commits)
platform/x86/intel/ifs: Add CPU_SUP_INTEL dependency
platform/x86: intel_cht_int33fe: Set driver data
platform/x86: intel-hid: fix _DSM function index handling
platform/x86: toshiba_acpi: use kobj_to_dev()
platform/x86: samsung-laptop: use kobj_to_dev()
platform/x86: gigabyte-wmi: Add support for Z490 AORUS ELITE AC and X570 AORUS ELITE WIFI
tools/power/x86/intel-speed-select: Fix warning for perf_cap.cpu
tools/power/x86/intel-speed-select: Display error on turbo mode disabled
Documentation: In-Field Scan
platform/x86/intel/ifs: add ABI documentation for IFS
trace: platform/x86/intel/ifs: Add trace point to track Intel IFS operations
platform/x86/intel/ifs: Add IFS sysfs interface
platform/x86/intel/ifs: Add scan test support
platform/x86/intel/ifs: Authenticate and copy to secured memory
platform/x86/intel/ifs: Check IFS Image sanity
platform/x86/intel/ifs: Read IFS firmware image
platform/x86/intel/ifs: Add stub driver for In-Field Scan
stop_machine: Add stop_core_cpuslocked() for per-core operations
x86/msr-index: Define INTEGRITY_CAPABILITIES MSR
x86/microcode/intel: Expose collect_cpu_info_early() for IFS
...
pressure:
SGX uses normal RAM allocated from special shmem files as backing storage
when it runs out of SGX memory (EPC). The code was overly aggressive when
freeing shmem pages and was inadvertently freeing perfectly good data.
This resulted in failures in the SGX instructions used to swap data back
into SGX memory.
This turned out to be really hard to trigger in mainline. It was
originally encountered testing the out-of-tree "SGX2" patches, but later
reproduced on mainline.
Fix the data loss by being more careful about truncating pages out of
the backing storage and more judiciously setting pages dirty.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEV76QKkVc4xCGURexaDWVMHDJkrAFAmKLqcgACgkQaDWVMHDJ
krA7rA//ZgNgOTzCp/jdntz2KSp9MPhwaSJg0MUnsa7wt0T/3sPXaEAu9wgSZod7
xqxH17LKUc27SyALtPrkvm68aVZ/Z0Nhq2gDndspXd/Zcl/CD/Cy+GI+ZpdNoYhz
Fuqiq1TrszzzqBksgiEal9S874+jum2uWqYBMHB45ODp+E7F479Zm42hI3dSp1VN
6n5zOi5u+unHgDRQ/rwMovu2XU61ZXrycqkbZvu4P4tRbEUH+EhAMKG2RyZOB2V9
XNqr1vBJ122CWMIxcdzEUEofPFFwVEtC9jK+rdgUW1ZYAPJDjVvcnXx7dpA9PHLb
DytBSWyeISllJKbea1pIMsdCT/IE4I3s0US2ZA3Ru7YAMgUIi+IGu++JJ2dWdDvx
GoJz6yBVw4r6cl7kLUfbtIUPsJLYkEMpTM4XODsxMwzd2/Jdbe2UfQskzEn9Auvc
1qGRspu/3VbqE5WFz5Npd94+B+8BOo7kKLcizBHqmX8U2PBkMnhRatxDMCu8frfL
DlrjosgUgMYQRkEp3Zugo33O8F2EAE0T1I9g7N4sullX0jGnFifjgiPipnWcnIB9
RnF5NHdrTMPwqhvzz+3o1yJgve56juZxESqn1khEIQEqgUtxFaEnrmYzdLlVkoGg
XbuY7TNp1hDC3s9OHeiCL2oUaSmyh0eKCokLiAuWowVzbuU69BU=
=pTAC
-----END PGP SIGNATURE-----
Merge tag 'x86_sgx_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 SGX updates from Dave Hansen:
"A set of patches to prevent crashes in SGX enclaves under heavy memory
pressure:
SGX uses normal RAM allocated from special shmem files as backing
storage when it runs out of SGX memory (EPC). The code was overly
aggressive when freeing shmem pages and was inadvertently freeing
perfectly good data. This resulted in failures in the SGX instructions
used to swap data back into SGX memory.
This turned out to be really hard to trigger in mainline. It was
originally encountered testing the out-of-tree "SGX2" patches, but
later reproduced on mainline.
Fix the data loss by being more careful about truncating pages out of
the backing storage and more judiciously setting pages dirty"
* tag 'x86_sgx_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sgx: Ensure no data in PCMD page after truncate
x86/sgx: Fix race between reclaimer and page fault handler
x86/sgx: Obtain backing storage page with enclave mutex held
x86/sgx: Mark PCMD page as dirty when modifying contents
x86/sgx: Disconnect backing page references from dirty status
Linus Torvalds
Daniel Thompson
Jiri Kosina
Damien Le Moal