IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
In virtio spec 0.95, VIRTIO_NET_F_GUEST_CSUM was designed to handle
partially checksummed packets, and the validation of fully checksummed
packets by the device is independent of VIRTIO_NET_F_GUEST_CSUM
negotiation. However, the specification erroneously stated:
"If VIRTIO_NET_F_GUEST_CSUM is not negotiated, the device MUST set flags
to zero and SHOULD supply a fully checksummed packet to the driver."
This statement is inaccurate because even without VIRTIO_NET_F_GUEST_CSUM
negotiation, the device can still set the VIRTIO_NET_HDR_F_DATA_VALID flag.
Essentially, the device can facilitate the validation of these packets'
checksums - a process known as RX checksum offloading - removing the need
for the driver to do so.
This scenario is currently not implemented in the driver and requires
correction. The necessary specification correction[1] has been made and
approved in the virtio TC vote.
[1] https://lists.oasis-open.org/archives/virtio-comment/202401/msg00011.html
Fixes: 4f49129be6fa ("virtio-net: Set RXCSUM feature if GUEST_CSUM is available")
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After ecf848eb934b ("net: usb: ax88179_178a: fix link status when link is
set to down/up") to not reset from usbnet_open after the reset from
usbnet_probe at initialization stage to speed up this, some issues have
been reported.
It seems to happen that if the initialization is slower, and some time
passes between the probe operation and the open operation, the second reset
from open is necessary too to have the device working. The reason is that
if there is no activity with the phy, this is "disconnected".
In order to improve this, the solution is to detect when the phy is
"disconnected", and we can use the phy status register for this. So we will
only reset the device from reset operation in this situation, that is, only
if necessary.
The same bahavior is happening when the device is stopped (link set to
down) and later is restarted (link set to up), so if the phy keeps working
we only need to enable the mac again, but if enough time passes between the
device stop and restart, reset is necessary, and we can detect the
situation checking the phy status register too.
cc: stable@vger.kernel.org # 6.6+
Fixes: ecf848eb934b ("net: usb: ax88179_178a: fix link status when link is set to down/up")
Reported-by: Yongqin Liu <yongqin.liu@linaro.org>
Reported-by: Antje Miederhöfer <a.miederhoefer@gmx.de>
Reported-by: Arne Fitzenreiter <arne_f@ipfire.org>
Tested-by: Yongqin Liu <yongqin.liu@linaro.org>
Tested-by: Antje Miederhöfer <a.miederhoefer@gmx.de>
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the new KMEM_CACHE() macro instead of direct kmem_cache_create
to simplify the creation of SLAB caches.
Signed-off-by: Hongfu Li <lihongfu@kylinos.cn>
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As defined by the MANA Hardware spec, the queue size for DMA is 4KB
minimal, and power of 2. And, the HWC queue size has to be exactly
4KB.
To support page sizes other than 4KB on ARM64, define the minimal
queue size as a macro separately from the PAGE_SIZE, which we always
assumed it to be 4KB before supporting ARM64.
Also, add MANA specific macros and update code related to size
alignment, DMA region calculations, etc.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/1718655446-6576-1-git-send-email-haiyangz@microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kamal Heib says:
====================
net/mlx4_en: Use ethtool_puts/sprintf
This patchset updates the mlx4_en driver to use the ethtool_puts and
ethtool_sprintf helper functions.
Signed-off-by: Kamal Heib <kheib@redhat.com>
====================
Link: https://lore.kernel.org/r/20240617172329.239819-1-kheib@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the ethtool_puts/ethtool_sprintf helper to print the stats strings
into the ethtool strings interface.
Signed-off-by: Kamal Heib <kheib@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240617172329.239819-4-kheib@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the ethtool_puts helper to print the selftest strings into the
ethtool strings interface.
Signed-off-by: Kamal Heib <kheib@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240617172329.239819-3-kheib@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the ethtool_puts helper to print the priv flags strings into the
ethtool strings interface.
Signed-off-by: Kamal Heib <kheib@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240617172329.239819-2-kheib@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
commit be27b8965297 ("net: stmmac: replace priv->speed with
the portTransmitRate from the tc-cbs parameters") introduced
a problem. When deleting, it prompts "Invalid portTransmitRate
0 (idleSlope - sendSlope)" and exits. Add judgment on cbs.enable.
Only when offload is enabled, speed divider needs to be calculated.
Fixes: be27b8965297 ("net: stmmac: replace priv->speed with the portTransmitRate from the tc-cbs parameters")
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240617013922.1035854-1-xiaolei.wang@windriver.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Get master/slave configuration for initial system start with the link in
down state. This ensures ethtool shows current configuration. Also
fixes link reconfiguration with ethtool while in down state, preventing
ethtool from displaying outdated configuration.
Even though dp83tg720_config_init() is executed periodically as long as
the link is in admin up state but no carrier is detected, this is not
sufficient for the link in admin down state where
dp83tg720_read_status() is not periodically executed. To cover this
case, we need an extra read role configuration in
dp83tg720_config_aneg().
Fixes: cb80ee2f9bee1 ("net: phy: Add support for the DP83TG720S Ethernet PHY")
Cc: stable@vger.kernel.org
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20240614094516.1481231-2-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In case this PHY is bootstrapped for managed mode, we need to manually
wake it. Otherwise no link will be detected.
Cc: stable@vger.kernel.org
Fixes: cb80ee2f9bee1 ("net: phy: Add support for the DP83TG720S Ethernet PHY")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20240614094516.1481231-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
openvswitch.sh makes use of substitutions of the form ${ns:0:1}, to
obtain the first character of $ns. Empirically, this is works with bash
but not dash. When run with dash these evaluate to an empty string and
printing an error to stdout.
# dash -c 'ns=client; echo "${ns:0:1}"' 2>error
# cat error
dash: 1: Bad substitution
# bash -c 'ns=client; echo "${ns:0:1}"' 2>error
c
# cat error
This leads to tests that neither pass nor fail.
F.e.
TEST: arp_ping [START]
adding sandbox 'test_arp_ping'
Adding DP/Bridge IF: sbx:test_arp_ping dp:arpping {, , }
create namespaces
./openvswitch.sh: 282: eval: Bad substitution
TEST: ct_connect_v4 [START]
adding sandbox 'test_ct_connect_v4'
Adding DP/Bridge IF: sbx:test_ct_connect_v4 dp:ct4 {, , }
./openvswitch.sh: 322: eval: Bad substitution
create namespaces
Resolve this by making openvswitch.sh a bash script.
Fixes: 918423fda910 ("selftests: openvswitch: add an initial flow programming case")
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://lore.kernel.org/r/20240617-ovs-selftest-bash-v1-1-7ae6ccd3617b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On 32bit systems, the "4 * max" multiply can overflow. Use kcalloc()
to do the allocation to prevent this.
Fixes: 44c494c8e30e ("ptp: track available ptp vclocks information")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Heng Qi <hengqi@linux.alibaba.com>
Link: https://lore.kernel.org/r/ee8110ed-6619-4bd7-9024-28c1f2ac24f4@moroto.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Hardcoding the number of CPUs at compile time does improve code
generation, but if you get it wrong the result will be confusion.
We already limited this earlier to only "experts" (see commit
fe5759d5bfda "cpumask: limit visibility of FORCE_NR_CPUS"), but with
distro kernel configs often having EXPERT enabled, that turns out to not
be much of a limit.
To quote the philosophers at Disney: "Everyone can be an expert. And
when everyone's an expert, no one will be".
There's a runtime warning if you then set nr_cpus to anything but the
forced number, but apparently that can be ignored too [1] and by then
it's pretty much too late anyway.
If we had some real way to limit this to "embedded only", maybe it would
be worth it, but let's see if anybody even notices that the option is
gone. We need to simplify kernel configuration anyway.
Link: https://lore.kernel.org/all/20240618105036.208a8860@rorschach.local.home/ [1]
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Paul McKenney <paulmck@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Ensure that EFI runtime services are not unmapped by PAN on ARM
- Avoid freeing the memory holding the EFI memory map inadvertently on
x86
- Avoid a false positive kmemleak warning on arm64
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQQm/3uucuRGn1Dmh0wbglWLn0tXAUCZm1QFgAKCRAwbglWLn0t
XDCpAP9tB6S9uQwDsR9PuxJfWOALJEqoMWCjGzLjt5HlGePlvAD9HaltvkT5p9Ff
TkfP4Ivl29BtuaNBIFGEiC6KJXETawc=
=Tvsr
-----END PGP SIGNATURE-----
Merge tag 'efi-fixes-for-v6.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
"Another small set of EFI fixes. Only the x86 one is likely to affect
any actual users (and has a cc:stable), but the issue it fixes was
only observed in an unusual context (kexec in a confidential VM).
- Ensure that EFI runtime services are not unmapped by PAN on ARM
- Avoid freeing the memory holding the EFI memory map inadvertently
on x86
- Avoid a false positive kmemleak warning on arm64"
* tag 'efi-fixes-for-v6.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi/arm64: Fix kmemleak false positive in arm64_efi_rt_init()
efi/x86: Free EFI memory map only when installing a new one.
efi/arm: Disable LPAE PAN when calling EFI runtime services
"struct vcap_operations" are not modified in these drivers.
Constifying this structure moves some data to a read-only section, so
increase overall security.
In order to do it, "struct vcap_control" also needs to be adjusted to this
new const qualifier.
As an example, on a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
15176 1094 16 16286 3f9e drivers/net/ethernet/microchip/lan966x/lan966x_vcap_impl.o
After:
=====
text data bss dec hex filename
15268 998 16 16282 3f9a drivers/net/ethernet/microchip/lan966x/lan966x_vcap_impl.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://lore.kernel.org/r/d8e76094d2e98ebb5bfc8205799b3a9db0b46220.1718524644.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
zones_ht is a global hashtable for flow_table with zone as key. However,
it does not consider netns when getting a flow_table from zones_ht in
tcf_ct_init(), and it means an act_ct action in netns A may get a
flow_table that belongs to netns B if it has the same zone value.
In Shuang's test with the TOPO:
tcf2_c <---> tcf2_sw1 <---> tcf2_sw2 <---> tcf2_s
tcf2_sw1 and tcf2_sw2 saw the same flow and used the same flow table,
which caused their ct entries entering unexpected states and the
TCP connection not able to end normally.
This patch fixes the issue simply by adding netns into the key of
tcf_ct_flow_table so that an act_ct action gets a flow_table that
belongs to its own netns in tcf_ct_init().
Note that for easy coding we don't use tcf_ct_flow_table.nf_ft.net,
as the ct_ft is initialized after inserting it to the hashtable in
tcf_ct_flow_table_get() and also it requires to implement several
functions in rhashtable_params including hashfn, obj_hashfn and
obj_cmpfn.
Fixes: 64ff70b80fd4 ("net/sched: act_ct: Offload established connections to flow table")
Reported-by: Shuang Li <shuali@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/1db5b6cc6902c5fc6f8c6cbd85494a2008087be5.1718488050.git.lucien.xin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
As it says in commit 3bc07321ccc2 ("xfrm: Force a dst refcount before
entering the xfrm type handlers"):
"Crypto requests might return asynchronous. In this case we leave the
rcu protected region, so force a refcount on the skb's destination
entry before we enter the xfrm type input/output handlers."
On TIPC decryption path it has the same problem, and skb_dst_force()
should be called before doing decryption to avoid a possible crash.
Shuang reported this issue when this warning is triggered:
[] WARNING: include/net/dst.h:337 tipc_sk_rcv+0x1055/0x1ea0 [tipc]
[] Kdump: loaded Tainted: G W --------- - - 4.18.0-496.el8.x86_64+debug
[] Workqueue: crypto cryptd_queue_worker
[] RIP: 0010:tipc_sk_rcv+0x1055/0x1ea0 [tipc]
[] Call Trace:
[] tipc_sk_mcast_rcv+0x548/0xea0 [tipc]
[] tipc_rcv+0xcf5/0x1060 [tipc]
[] tipc_aead_decrypt_done+0x215/0x2e0 [tipc]
[] cryptd_aead_crypt+0xdb/0x190
[] cryptd_queue_worker+0xed/0x190
[] process_one_work+0x93d/0x17e0
Fixes: fc1b6d6de220 ("tipc: introduce TIPC encryption & authentication")
Reported-by: Shuang Li <shuali@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/fbe3195fad6997a4eec62d9bf076b2ad03ac336b.1718476040.git.lucien.xin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Luo Jie says:
====================
Introduce PHY mode 10G-QXGMII
This patch series adds 10G-QXGMII mode for PHY driver. The patch
series is split from the QCA8084 PHY driver patch series below.
https://lore.kernel.org/all/20231215074005.26976-1-quic_luoj@quicinc.com/
Per Andrew Lunn’s advice, submitting this patch series for acceptance
as they already include the necessary 'Reviewed-by:' tags. This way,
they need not wait for QCA8084 series patches to conclude review.
Changes in v2:
* remove PHY_INTERFACE_MODE_10G_QXGMII from workaround of
validation in the phylink_validate_phy. 10G_QXGMII will
be set into phy->possible_interfaces in its .config_init
method of PHY driver that supports it.
====================
Link: https://lore.kernel.org/r/20240615120028.2384732-1-quic_luoj@quicinc.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add the new interface mode 10g-qxgmii, which is similar to
usxgmii but extend to 4 channels to support maximum of 4
ports with the link speed 10M/100M/1G/2.5G.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
10G-QXGMII is a MAC-to-PHY interface defined by the USXGMII multiport
specification. It uses the same signaling as USXGMII, but it multiplexes
4 ports over the link, resulting in a maximum speed of 2.5G per port.
Some in-tree SoCs like the NXP LS1028A use "usxgmii" when they mean
either the single-port USXGMII or the quad-port 10G-QXGMII variant, and
they could get away just fine with that thus far. But there is a need to
distinguish between the 2 as far as SerDes drivers are concerned.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The TSO engine works well when the frames are not VLAN Tagged.
But it will produce broken segments when frames are VLAN Tagged.
The first segment is all good, while the second segment to the
last segment are broken, they lack of required VLAN tag.
An example here:
========
// 1st segment of a VLAN Tagged TSO frame, nothing wrong.
MacSrc > MacDst, ethertype 802.1Q (0x8100), length 1518: vlan 100, p 1, ethertype IPv4 (0x0800), HostA:42643 > HostB:5201: Flags [.], seq 1:1449
// 2nd to last segments of a VLAN Tagged TSO frame, VLAN tag is missing.
MacSrc > MacDst, ethertype IPv4 (0x0800), length 1514: HostA:42643 > HostB:5201: Flags [.], seq 1449:2897
MacSrc > MacDst, ethertype IPv4 (0x0800), length 1514: HostA:42643 > HostB:5201: Flags [.], seq 2897:4345
MacSrc > MacDst, ethertype IPv4 (0x0800), length 1514: HostA:42643 > HostB:5201: Flags [.], seq 4345:5793
MacSrc > MacDst, ethertype IPv4 (0x0800), length 1514: HostA:42643 > HostB:5201: Flags [P.], seq 5793:7241
// normal VLAN Tagged non-TSO frame, nothing wrong.
MacSrc > MacDst, ethertype 802.1Q (0x8100), length 1022: vlan 100, p 1, ethertype IPv4 (0x0800), HostA:42643 > HostB:5201: Flags [P.], seq 7241:8193
MacSrc > MacDst, ethertype 802.1Q (0x8100), length 70: vlan 100, p 1, ethertype IPv4 (0x0800), HostA:42643 > HostB:5201: Flags [F.], seq 8193
========
When transmitting VLAN Tagged TSO frames, never insert VLAN tag by HW,
always insert VLAN tag to SKB payload, then TSO works well on VLANs for
all MAC cores.
Tested on DWMAC CORE 5.10a, DWMAC CORE 5.20a and DWXGMAC CORE 3.20a
Signed-off-by: Furong Xu <0x1207@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240615095611.517323-1-0x1207@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
syzbot found hanging tasks waiting on rtnl_lock [1]
A reproducer is available in the syzbot bug.
When a request to add multiple actions with the same index is sent, the
second request will block forever on the first request. This holds
rtnl_lock, and causes tasks to hang.
Return -EAGAIN to prevent infinite looping, while keeping documented
behavior.
[1]
INFO: task kworker/1:0:5088 blocked for more than 143 seconds.
Not tainted 6.9.0-rc4-syzkaller-00173-g3cdb45594619 #0
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/1:0 state:D stack:23744 pid:5088 tgid:5088 ppid:2 flags:0x00004000
Workqueue: events_power_efficient reg_check_chans_work
Call Trace:
<TASK>
context_switch kernel/sched/core.c:5409 [inline]
__schedule+0xf15/0x5d00 kernel/sched/core.c:6746
__schedule_loop kernel/sched/core.c:6823 [inline]
schedule+0xe7/0x350 kernel/sched/core.c:6838
schedule_preempt_disabled+0x13/0x30 kernel/sched/core.c:6895
__mutex_lock_common kernel/locking/mutex.c:684 [inline]
__mutex_lock+0x5b8/0x9c0 kernel/locking/mutex.c:752
wiphy_lock include/net/cfg80211.h:5953 [inline]
reg_leave_invalid_chans net/wireless/reg.c:2466 [inline]
reg_check_chans_work+0x10a/0x10e0 net/wireless/reg.c:2481
Fixes: 0190c1d452a9 ("net: sched: atomically check-allocate action")
Reported-by: syzbot+b87c222546179f4513a7@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=b87c222546179f4513a7
Signed-off-by: David Ruth <druth@chromium.org>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20240614190326.1349786-1-druth@chromium.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When the system resumes from sleep, the phy_init_hw() function invokes
config_init(), which clears all interrupt masks and causes wake events to be
lost in subsequent wake sequences. Remove interrupt mask clearing from
config_init() and preserve relevant masks in config_intr().
Fixes: 7d901a1e878a ("net: phy: add Maxlinear GPY115/21x/24x driver")
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Prevent options not supported by the PHY from being requested to it by the MAC
Whenever a WOL option is supported by both, the PHY is given priority
since that usually leads to better power savings.
Fixes: e9e13b6adc33 ("lan743x: fix for potential NULL pointer dereference with bare card")
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When Wake-on-LAN (WoL) is active and the system is in suspend mode, triggering
a system event can wake the system from sleep, which may block the data path.
To restore normal data path functionality after waking, disable all wake-up
events. Furthermore, clear all Write 1 to Clear (W1C) status bits by writing
1's to them.
Fixes: 4d94282afd95 ("lan743x: Add power management support")
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
With ARCH=m68k, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in sound/oss/dmasound/dmasound_core.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/20240617-md-m68k-sound-oss-dmasound-v1-1-5c19306be930@quicinc.com
The whole mechanism to remember occurred SPI interrupts is not atomic,
which could lead to unexpected behavior. So fix this by using atomic bit
operations instead.
Fixes: 291ab06ecf67 ("net: qualcomm: new Ethernet over SPI driver for QCA7000")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20240614145030.7781-1-wahrenst@gmx.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=nYky
-----END PGP SIGNATURE-----
Merge tag 'lsm-pr-20240617' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull lsm fix from Paul Moore:
"A single LSM/IMA patch to fix a problem caused by sleeping while in a
RCU critical section"
* tag 'lsm-pr-20240617' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
ima: Avoid blocking in RCU read-side critical section
This declaration was added to the header to be called from ethtool.
ethtool is separated from core for code organization but it is not really
a separate entity, it controls very core things.
As ethtool is an internal stuff it is not wise to have it in netdevice.h.
Move the declaration to net/core/dev.h instead.
Remove the EXPORT_SYMBOL_GPL call as ethtool can not be built as a module.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://lore.kernel.org/r/20240612-feature_ptp_netnext-v15-2-b2a086257b63@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With ARCH=hexagon, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/net/ethernet/synopsys/dwc-xlgmac.o
With most other ARCH settings the MODULE_DESCRIPTION() is provided by
the macro invocation in dwc-xlgmac-pci.c. However, for hexagon, the
PCI bus is not enabled, and hence CONFIG_DWC_XLGMAC_PCI is not set.
As a result, dwc-xlgmac-pci.c is not compiled, and hence is not linked
into dwc-xlgmac.o.
To avoid this issue, relocate the MODULE_DESCRIPTION() and other
related macros from dwc-xlgmac-pci.c to dwc-xlgmac-common.c, since
that file already has an existing MODULE_LICENSE() and it is
unconditionally linked into dwc-xlgmac.o.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240616-md-hexagon-drivers-net-ethernet-synopsys-v1-1-55852b60aef8@quicinc.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To cleanup rxqs in port context structures, instead of duplicating the
code, use existing function mana_cleanup_port_context() which does
the exact cleanup that's needed.
Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Wei Liu <wei.liu@kernel.org>
Reviewed-by: Heng Qi <hengqi@linux.alibaba.com>
Link: https://lore.kernel.org/r/1718349548-28697-1-git-send-email-shradhagupta@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It is important to have fixed (sub)test names in TAP, because these
names are used to identify them. If they are not fixed, tracking cannot
be done.
Some subtests from the userspace_pm selftest were using random numbers
in their names: the client and server address IDs from $RANDOM, and the
client port number randomly picked by the kernel when creating the
connection. These values have been replaced by 'client' and 'server'
words: that's even more helpful than showing random numbers. Note that
the addresses IDs are incremented and decremented in the test: +1 or -1
are then displayed in these cases.
Not to loose info that can be useful for debugging in case of issues,
these random numbers are now displayed at the beginning of the test.
Fixes: f589234e1af0 ("selftests: mptcp: userspace_pm: format subtests results in TAP")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240614-upstream-net-20240614-selftests-mptcp-uspace-pm-fixed-test-names-v1-1-460ad3edb429@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some applications were reporting ETIMEDOUT errors on apparently
good looking flows, according to packet dumps.
We were able to root cause the issue to an accidental setting
of tp->retrans_stamp in the following scenario:
- client sends TFO SYN with data.
- server has TFO disabled, ACKs only SYN but not payload.
- client receives SYNACK covering only SYN.
- tcp_ack() eats SYN and sets tp->retrans_stamp to 0.
- tcp_rcv_fastopen_synack() calls tcp_xmit_retransmit_queue()
to retransmit TFO payload w/o SYN, sets tp->retrans_stamp to "now",
but we are not in any loss recovery state.
- TFO payload is ACKed.
- we are not in any loss recovery state, and don't see any dupacks,
so we don't get to any code path that clears tp->retrans_stamp.
- tp->retrans_stamp stays non-zero for the lifetime of the connection.
- after first RTO, tcp_clamp_rto_to_user_timeout() clamps second RTO
to 1 jiffy due to bogus tp->retrans_stamp.
- on clamped RTO with non-zero icsk_retransmits, retransmits_timed_out()
sets start_ts from tp->retrans_stamp from TFO payload retransmit
hours/days ago, and computes bogus long elapsed time for loss recovery,
and suffers ETIMEDOUT early.
Fixes: a7abf3cd76e1 ("tcp: consider using standard rtx logic in tcp_rcv_fastopen_synack()")
CC: stable@vger.kernel.org
Co-developed-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Co-developed-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240614130615.396837-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Drop the WARN_ON_ONCE inn gue_gro_receive if the encapsulated type is
not known or does not have a GRO handler.
Such a packet is easily constructed. Syzbot generates them and sets
off this warning.
Remove the warning as it is expected and not actionable.
The warning was previously reduced from WARN_ON to WARN_ON_ONCE in
commit 270136613bf7 ("fou: Do WARN_ON_ONCE in gue_gro_receive for bad
proto callbacks").
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240614122552.1649044-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts commit 3afb76a66b5559a7b595155803ce23801558a7a9.
This was a wrongheaded workaround for an issue that had already been
fixed much better by commit 4ef9ad19e176 ("mm: huge_memory: don't force
huge page alignment on 32 bit").
Asking users questions at kernel compile time that they can't make sense
of is not a viable strategy. And the fact that even the kernel VM
maintainers apparently didn't catch that this "fix" is not a fix any
more pretty much proves the point that people can't be expected to
understand the implications of the question.
It may well be the case that we could improve things further, and that
__thp_get_unmapped_area() should take the mapping randomization into
account even for 64-bit kernels. Maybe we should not be so eager to use
THP mappings.
But in no case should this be a kernel config option.
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mainly MM singleton fixes. And a couple of ocfs2 regression fixes.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZnCEQAAKCRDdBJ7gKXxA
jmgSAQDk3BYs1n67cnwx/Zi04yMYDyfYTCYg2udPfT2a+GpmbwD+N5dJd/vCztXH
5eLpP11xd/yr2+I9FefyZeUuA80KtgQ=
=2agY
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2024-06-17-11-43' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"Mainly MM singleton fixes. And a couple of ocfs2 regression fixes"
* tag 'mm-hotfixes-stable-2024-06-17-11-43' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
kcov: don't lose track of remote references during softirqs
mm: shmem: fix getting incorrect lruvec when replacing a shmem folio
mm/debug_vm_pgtable: drop RANDOM_ORVALUE trick
mm: fix possible OOB in numa_rebuild_large_mapping()
mm/migrate: fix kernel BUG at mm/compaction.c:2761!
selftests: mm: make map_fixed_noreplace test names stable
mm/memfd: add documentation for MFD_NOEXEC_SEAL MFD_EXEC
mm: mmap: allow for the maximum number of bits for randomizing mmap_base by default
gcov: add support for GCC 14
zap_pid_ns_processes: clear TIF_NOTIFY_SIGNAL along with TIF_SIGPENDING
mm: huge_memory: fix misused mapping_large_folio_support() for anon folios
lib/alloc_tag: fix RCU imbalance in pgalloc_tag_get()
lib/alloc_tag: do not register sysctl interface when CONFIG_SYSCTL=n
MAINTAINERS: remove Lorenzo as vmalloc reviewer
Revert "mm: init_mlocked_on_free_v3"
mm/page_table_check: fix crash on ZONE_DEVICE
gcc: disable '-Warray-bounds' for gcc-9
ocfs2: fix NULL pointer dereference in ocfs2_abort_trigger()
ocfs2: fix NULL pointer dereference in ocfs2_journal_dirty()
Update current email address for Kees Cook in the MAINTAINER file to
match the change from commit 4e173c825b19 ("mailmap: update entry for
Kees Cook").
Link: https://lore.kernel.org/r/20240617181257.work.206-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmZv3pUTHHdlaS5saXVA
a2VybmVsLm9yZwAKCRB2FHBfkEGgXlH8B/wMHji/KH1UFTVjGG8YBT2SSzeDrVjD
5GZ7HAVvSb2xLHbgLM8ioi7t1YoRv30d+cjGzNcIz6PSICqVB9q7QWaY1Vc3rb9G
0/77GMnrwF+RFMPQzF2sgbQLILmBYi/47qeJOjPF6P/pvpd4xhrPuGQDJAfS75e7
UJalTFT4l2ENRxOLuni/8NGjAZG/OVMpQY+XVaoHvYamnGhYcXnOamKPg0nNC6f5
/oYh2s1HjWH1HCtDT9UHXBHiS8Jt4WrchD8uGII8K8SaxL5dhT9Lm0v9CcAagPq3
l/7PxtrDE09dDirokZnRMQlhiuYBIEMZoIHl5bCBfODGukGOmnsMk0zi
=LoeY
-----END PGP SIGNATURE-----
Merge tag 'hyperv-fixes-signed-20240616' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull Hyper-V fixes from Wei Liu:
- Some cosmetic changes for hv.c and balloon.c (Aditya Nagesh)
- Two documentation updates (Michael Kelley)
- Suppress the invalid warning for packed member alignment (Saurabh
Sengar)
- Two hv_balloon fixes (Michael Kelley)
* tag 'hyperv-fixes-signed-20240616' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
Drivers: hv: Cosmetic changes for hv.c and balloon.c
Documentation: hyperv: Improve synic and interrupt handling description
Documentation: hyperv: Update spelling and fix typo
tools: hv: suppress the invalid warning for packed member alignment
hv_balloon: Enable hot-add for memblock sizes > 128 MiB
hv_balloon: Use kernel macros to simplify open coded sequences
D. Wythe says:
====================
Introduce IPPROTO_SMC
This patch allows to create smc socket via AF_INET,
similar to the following code,
/* create v4 smc sock */
v4 = socket(AF_INET, SOCK_STREAM, IPPROTO_SMC);
/* create v6 smc sock */
v6 = socket(AF_INET6, SOCK_STREAM, IPPROTO_SMC);
There are several reasons why we believe it is appropriate here:
1. For smc sockets, it actually use IPv4 (AF-INET) or IPv6 (AF-INET6)
address. There is no AF_SMC address at all.
2. Create smc socket in the AF_INET(6) path, which allows us to reuse
the infrastructure of AF_INET(6) path, such as common ebpf hooks.
Otherwise, smc have to implement it again in AF_SMC path. Such as:
1. Replace IPPROTO_TCP with IPPROTO_SMC in the socket() syscall
initiated by the user, without the use of LD-PRELOAD.
2. Select whether immediate fallback is required based on peer's port/ip
before connect().
A very significant result is that we can now use eBPF to implement smc_run
instead of LD_PRELOAD, who is completely ineffective in scenarios of static
linking.
Another potential value is that we are attempting to optimize the
performance of fallback socks, where merging socks is an important part,
and it relies on the creation of SMC sockets under the AF_INET path.
(More information :
https://lore.kernel.org/netdev/1699442703-25015-1-git-send-email-alibuda@linux.alibaba.com/T/)
v2 -> v1:
- Code formatting, mainly including alignment and annotation repair.
- move inet_smc proto ops to inet_smc.c, avoiding af_smc.c becoming too bulky.
- Fix the issue where refactoring affects the initialization order.
- Fix compile warning (unused out_inet_prot) while CONFIG_IPV6 was not set.
v3 -> v2:
- Add Alibaba's copyright information to the newfile
v4 -> v3:
- Fix some spelling errors
- Align function naming style with smc_sock_init() to smc_sk_init()
- Reversing the order of the conditional checks on clcsock to make the code more intuitive
v5 -> v4:
- Fix some spelling errors
- Added comment, "/* CONFIG_IPV6 */", after the final #endif directive.
- Rename smc_inet.h and smc_inet.c to smc_inet.h and smc_inet.c
- Encapsulate the initialization and destruction of inet_smc in inet_smc.c,
rather than implementing it directly in af_smc.c.
- Remove useless header files in smc_inet.h
- Make smc_inet_prot_xxx and smc_inet_sock_init() to be static, since it's
only used in smc_inet.c
v6 -> v5:
- Wrapping lines to not exceed 80 characters
- Combine initialization and error handling of smc_inet6 into the same #if
macro block.
v7 -> v6:
- Modify the value of IPPROTO_SMC to 256 so that it does not affect IPPROTO-MAX
v8 -> v7:
- Remove useless declarations.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch allows to create smc socket via AF_INET,
similar to the following code,
/* create v4 smc sock */
v4 = socket(AF_INET, SOCK_STREAM, IPPROTO_SMC);
/* create v6 smc sock */
v6 = socket(AF_INET6, SOCK_STREAM, IPPROTO_SMC);
There are several reasons why we believe it is appropriate here:
1. For smc sockets, it actually use IPv4 (AF-INET) or IPv6 (AF-INET6)
address. There is no AF_SMC address at all.
2. Create smc socket in the AF_INET(6) path, which allows us to reuse
the infrastructure of AF_INET(6) path, such as common ebpf hooks.
Otherwise, smc have to implement it again in AF_SMC path.
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Tested-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Externalize smc proto operations (smc_xxx) to allow
access from files other than af_smc.c
This is in preparation for the subsequent implementation
of the AF_INET version of SMC.
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Tested-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
