IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
[ Upstream commit f9b2e603c6216824e34dc9a67205d98ccc9a41ca ]
Wired GIP devices present multiple interfaces with the same USB identification
other than the interface number. This adds constants for differentiating two of
them and uses them where appropriate
Signed-off-by: Vicki Pfau <vi@endrift.com>
Link: https://lore.kernel.org/r/20230411031650.960322-2-vi@endrift.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 67ea0b7ce41844eae7c10bb04dfe66a23318c224 ]
When an overflow occurs in the PRI queue, the SMMU toggles the overflow
flag in the PROD register. To exit the overflow condition, the PRI thread
is supposed to acknowledge it by toggling this flag in the CONS register.
Unacknowledged overflow causes the queue to stop adding anything new.
Currently, the priq thread always writes the CONS register back to the
SMMU after clearing the queue.
The writeback is not necessary if the OVFLG in the PROD register has not
been changed, no overflow has occured.
This commit checks the difference of the overflow flag between CONS and
PROD register. If it's different, toggles the OVACKFLG flag in the CONS
register and write it to the SMMU.
The situation is similar for the event queue.
The acknowledge register is also toggled after clearing the event
queue but never propagated to the hardware. This would only be done the
next time when executing evtq thread.
Unacknowledged event queue overflow doesn't affect the event
queue, because the SMMU still adds elements to that queue when the
overflow condition is active.
But it feel nicer to keep SMMU in sync when possible, so use the same
way here as well.
Signed-off-by: Tomas Krcka <krckatom@amazon.de>
Link: https://lore.kernel.org/r/20230329123420.34641-1-tomas.krcka@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b4a2adbf3586efa12fe78b9dec047423e01f3010 ]
Older gcc versions get confused by comparing a u32 value to a negative
constant in a switch()/case block:
drivers/clk/tegra/clk-tegra20.c: In function 'tegra20_clk_measure_input_freq':
drivers/clk/tegra/clk-tegra20.c:581:2: error: case label does not reduce to an integer constant
case OSC_CTRL_OSC_FREQ_12MHZ:
^~~~
drivers/clk/tegra/clk-tegra20.c:593:2: error: case label does not reduce to an integer constant
case OSC_CTRL_OSC_FREQ_26MHZ:
Make the constants unsigned instead.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230227085914.2560984-1-arnd@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aa4d540b4150052ae3b36d286b9c833a961ce291 ]
GCC-13 (and Clang)[1] does not like to access a partially allocated
object, since it cannot reason about it for bounds checking.
In this case 140 bytes are allocated for an object of type struct
ib_umad_packet:
packet = kzalloc(sizeof(*packet) + IB_MGMT_RMPP_HDR, GFP_KERNEL);
However, notice that sizeof(*packet) is only 104 bytes:
struct ib_umad_packet {
struct ib_mad_send_buf * msg; /* 0 8 */
struct ib_mad_recv_wc * recv_wc; /* 8 8 */
struct list_head list; /* 16 16 */
int length; /* 32 4 */
/* XXX 4 bytes hole, try to pack */
struct ib_user_mad mad __attribute__((__aligned__(8))); /* 40 64 */
/* size: 104, cachelines: 2, members: 5 */
/* sum members: 100, holes: 1, sum holes: 4 */
/* forced alignments: 1, forced holes: 1, sum forced holes: 4 */
/* last cacheline: 40 bytes */
} __attribute__((__aligned__(8)));
and 36 bytes extra bytes are allocated for a flexible-array member in
struct ib_user_mad:
include/rdma/ib_mad.h:
120 enum {
...
123 IB_MGMT_RMPP_HDR = 36,
... }
struct ib_user_mad {
struct ib_user_mad_hdr hdr; /* 0 64 */
/* --- cacheline 1 boundary (64 bytes) --- */
__u64 data[] __attribute__((__aligned__(8))); /* 64 0 */
/* size: 64, cachelines: 1, members: 2 */
/* forced alignments: 1 */
} __attribute__((__aligned__(8)));
So we have sizeof(*packet) + IB_MGMT_RMPP_HDR == 140 bytes
Then the address of the flex-array member (for which only 36 bytes were
allocated) is casted and copied into a pointer to struct ib_rmpp_mad,
which, in turn, is of size 256 bytes:
rmpp_mad = (struct ib_rmpp_mad *) packet->mad.data;
struct ib_rmpp_mad {
struct ib_mad_hdr mad_hdr; /* 0 24 */
struct ib_rmpp_hdr rmpp_hdr; /* 24 12 */
u8 data[220]; /* 36 220 */
/* size: 256, cachelines: 4, members: 3 */
};
The thing is that those 36 bytes allocated for flex-array member data
in struct ib_user_mad onlly account for the size of both struct ib_mad_hdr
and struct ib_rmpp_hdr, but nothing is left for array u8 data[220].
So, the compiler is legitimately complaining about accessing an object
for which not enough memory was allocated.
Apparently, the only members of struct ib_rmpp_mad that are relevant
(that are actually being used) in function ib_umad_write() are mad_hdr
and rmpp_hdr. So, instead of casting packet->mad.data to
(struct ib_rmpp_mad *) create a new structure
struct ib_rmpp_mad_hdr {
struct ib_mad_hdr mad_hdr;
struct ib_rmpp_hdr rmpp_hdr;
} __packed;
and cast packet->mad.data to (struct ib_rmpp_mad_hdr *).
Notice that
IB_MGMT_RMPP_HDR == sizeof(struct ib_rmpp_mad_hdr) == 36 bytes
Refactor the rest of the code, accordingly.
Fix the following warnings seen under GCC-13 and -Warray-bounds:
drivers/infiniband/core/user_mad.c:564:50: warning: array subscript ‘struct ib_rmpp_mad[0]’ is partly outside array bounds of ‘unsigned char[140]’ [-Warray-bounds=]
drivers/infiniband/core/user_mad.c:566:42: warning: array subscript ‘struct ib_rmpp_mad[0]’ is partly outside array bounds of ‘unsigned char[140]’ [-Warray-bounds=]
drivers/infiniband/core/user_mad.c:618:25: warning: array subscript ‘struct ib_rmpp_mad[0]’ is partly outside array bounds of ‘unsigned char[140]’ [-Warray-bounds=]
drivers/infiniband/core/user_mad.c:622:44: warning: array subscript ‘struct ib_rmpp_mad[0]’ is partly outside array bounds of ‘unsigned char[140]’ [-Warray-bounds=]
Link: https://github.com/KSPP/linux/issues/273
Link: https://godbolt.org/z/oYWaGM4Yb [1]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/ZBpB91qQcB10m3Fw@work
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e0b081d17a9f4e5c0cbb0e5fbeb1abe3de0f7e4e ]
With KCSAN enabled, end_of_stack() can get out-of-lined. Force it
inline.
Fixes the following warnings:
vmlinux.o: warning: objtool: check_stackleak_irqoff+0x2b: call to end_of_stack() leaves .noinstr.text section
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/cc1b4d73d3a428a00d206242a68fdf99a934ca7b.1681320026.git.jpoimboe@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9be24faadd085c284890c3afcec7a0184642315a ]
mcb-pci requests a fixed-size memory region to parse the chameleon
table, however, if the chameleon table is smaller that the allocated
region, it could overlap with the IP Cores' memory regions.
After parsing the chameleon table, drop/reallocate the memory region
with the actual chameleon table size.
Co-developed-by: Jorge Sanjuan Garcia <jorge.sanjuangarcia@duagon.com>
Signed-off-by: Jorge Sanjuan Garcia <jorge.sanjuangarcia@duagon.com>
Signed-off-by: Javier Rodriguez <josejavier.rodriguez@duagon.com>
Signed-off-by: Johannes Thumshirn <jth@kernel.org>
Link: https://lore.kernel.org/r/20230411083329.4506-3-jth@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 04e82793f068d2f0ffe62fcea03d007a8cdc16a7 ]
When we unbind a serial port hardware specific 8250 driver, the generic
serial8250 driver takes over the port. After that we see an oops about 10
seconds later. This can produce the following at least on some TI SoCs:
Unhandled fault: imprecise external abort (0x1406)
Internal error: : 1406 [#1] SMP ARM
Turns out that we may still have the serial port hardware specific driver
port->pm in use, and serial8250_pm() tries to call it after the port
specific driver is gone:
serial8250_pm [8250_base] from uart_change_pm+0x54/0x8c [serial_base]
uart_change_pm [serial_base] from uart_hangup+0x154/0x198 [serial_base]
uart_hangup [serial_base] from __tty_hangup.part.0+0x328/0x37c
__tty_hangup.part.0 from disassociate_ctty+0x154/0x20c
disassociate_ctty from do_exit+0x744/0xaac
do_exit from do_group_exit+0x40/0x8c
do_group_exit from __wake_up_parent+0x0/0x1c
Let's fix the issue by calling serial8250_set_defaults() in
serial8250_unregister_port(). This will set the port back to using
the serial8250 default functions, and sets the port->pm to point to
serial8250_pm.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20230418101407.12403-1-tony@atomide.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dac3b192107b978198e89ec0f77375738352e0c8 ]
PD3.0 Spec 6.4.4.3.2 say that only Responder supports 12 or more SVIDs,
the Discover SVIDs Command Shall be executed multiple times until a
Discover SVIDs VDO is returned ending either with a SVID value of
0x0000 in the last part of the last VDO or with a VDO containing two
SVIDs with values of 0x0000.
In the current implementation, if the last VDO does not find that the
Discover SVIDs Command would be executed multiple times even if the
Responder SVIDs are less than 12, and we found some odd dockers just
meet this case. So fix it.
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
Link: https://lore.kernel.org/r/20230316081149.24519-1-frank.wang@rock-chips.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bea407a427baa019758f29f4d31b26f008bb8cc6 ]
Some devices will include battery status usages in the HID descriptor
but we won't see that battery data for one reason or another. For example,
AES sensors won't send battery data unless an AES pen is in proximity.
If a user does not have an AES pen but instead only interacts with the
AES touchscreen with their fingers then there is no need for us to create
a battery object. Similarly, if a family of peripherals shares the same
HID descriptor between wired-only and wireless-capable SKUs, users of the
former may never see a battery event and will not want a power_supply
object created.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217062
Link: https://gitlab.gnome.org/GNOME/gnome-control-center/-/issues/2354
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Tested-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 87c614175bbf28d3fd076dc2d166bac759e41427 ]
When using gpio based chip select the cs value can go outside the range
0 – 3. The various MX51_ECSPI_* macros did not take this into consideration
resulting in possible corruption of the configuration.
For example for any cs value over 3 the SCLKPHA bits would not be set and
other values in the register possibly corrupted.
One way to fix this is to just mask the cs bits to 2 bits. This still
allows all 4 native chip selects to work as well as gpio chip selects
(which can use any of the 4 chip select configurations).
Signed-off-by: Kevin Groeneveld <kgroeneveld@lenbrook.com>
Link: https://lore.kernel.org/r/20230318222132.3373-1-kgroeneveld@lenbrook.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5b3691d15e04b6d5a32c915577b8dbc5cfb56382 ]
Now that USB HID++ devices can gather a serial number that matches the
one that would be gathered when connected through a Unifying receiver,
remove the last difference by dropping the product ID as devices
usually have different product IDs when connected through USB or
Unifying.
For example, on the serials on a G903 wired/wireless mouse:
- Unifying before patch: 4067-e8-ce-cd-45
- USB before patch: c086-e8-ce-cd-45
- Unifying and USB after patch: e8-ce-cd-45
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Link: https://lore.kernel.org/r/20230302130117.3975-2-hadess@hadess.net
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7ad1fe0da0fa91bf920b79ab05ae97bfabecc4f4 ]
For devices that support the 0x0003 feature (Device Information) version 4,
set the serial based on the output of that feature, rather than relying
on the usbhid code setting the USB serial.
This should allow the serial when connected through USB to (nearly)
match the one when connected through a unifying receiver.
For example, on the serials on a G903 wired/wireless mouse:
- Unifying: 4067-e8-ce-cd-45
- USB before patch: 017C385C3837
- USB after patch: c086-e8-ce-cd-45
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Link: https://lore.kernel.org/r/20230302130117.3975-1-hadess@hadess.net
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 25e97f7b1866e6b8503be349eeea44bb52d661ce ]
conn->chan_lock isn't acquired before l2cap_get_chan_by_scid,
if l2cap_get_chan_by_scid returns NULL, then 'bad unlock balance'
is triggered.
Reported-by: syzbot+9519d6b5b79cf7787cf3@syzkaller.appspotmail.com
Link: https://lore.kernel.org/all/000000000000894f5f05f95e9f4d@google.com/
Signed-off-by: Min Li <lm0963hack@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ef16799640865f937719f0771c93be5dca18adc6 ]
A received TKIP key may be up to 32 bytes because it may contain
MIC rx/tx keys too. These are not used by iwl and copying these
over overflows the iwl_keyinfo.key field.
Add a check to not copy more data to iwl_keyinfo.key then will fit.
This fixes backtraces like this one:
memcpy: detected field-spanning write (size 32) of single field "sta_cmd.key.key" at drivers/net/wireless/intel/iwlwifi/dvm/sta.c:1103 (size 16)
WARNING: CPU: 1 PID: 946 at drivers/net/wireless/intel/iwlwifi/dvm/sta.c:1103 iwlagn_send_sta_key+0x375/0x390 [iwldvm]
<snip>
Hardware name: Dell Inc. Latitude E6430/0H3MT5, BIOS A21 05/08/2017
RIP: 0010:iwlagn_send_sta_key+0x375/0x390 [iwldvm]
<snip>
Call Trace:
<TASK>
iwl_set_dynamic_key+0x1f0/0x220 [iwldvm]
iwlagn_mac_set_key+0x1e4/0x280 [iwldvm]
drv_set_key+0xa4/0x1b0 [mac80211]
ieee80211_key_enable_hw_accel+0xa8/0x2d0 [mac80211]
ieee80211_key_replace+0x22d/0x8e0 [mac80211]
<snip>
Link: https://www.alionet.org/index.php?topic=1469.0
Link: https://lore.kernel.org/linux-wireless/20230218191056.never.374-kees@kernel.org/
Link: https://lore.kernel.org/linux-wireless/68760035-7f75-1b23-e355-bfb758a87d83@redhat.com/
Cc: Kees Cook <keescook@chromium.org>
Suggested-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 58d1b717879bfeabe09b35e41ad667c79933eb2e ]
An integer overflow occurs in the iwl_write_to_user_buf() function,
which is called by the iwl_dbgfs_monitor_data_read() function.
static bool iwl_write_to_user_buf(char __user *user_buf, ssize_t count,
void *buf, ssize_t *size,
ssize_t *bytes_copied)
{
int buf_size_left = count - *bytes_copied;
buf_size_left = buf_size_left - (buf_size_left % sizeof(u32));
if (*size > buf_size_left)
*size = buf_size_left;
If the user passes a SIZE_MAX value to the "ssize_t count" parameter,
the ssize_t count parameter is assigned to "int buf_size_left".
Then compare "*size" with "buf_size_left" . Here, "buf_size_left" is a
negative number, so "*size" is assigned "buf_size_left" and goes into
the third argument of the copy_to_user function, causing a heap overflow.
This is not a security vulnerability because iwl_dbgfs_monitor_data_read()
is a debugfs operation with 0400 privileges.
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230414130637.2d80ace81532.Iecfba549e0e0be21bbb0324675392e42e75bd5ad@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b655b9a9f8467684cfa8906713d33b71ea8c8f54 ]
It is possible that iwl_pci_probe() will fail and free the trans,
then afterwards iwl_pci_remove() will be called and crash by trying
to access trans which is already freed, fix it.
iwlwifi 0000:01:00.0: Detected crf-id 0xa5a5a5a2, cnv-id 0xa5a5a5a2
wfpm id 0xa5a5a5a2
iwlwifi 0000:01:00.0: Can't find a correct rfid for crf id 0x5a2
...
BUG: kernel NULL pointer dereference, address: 0000000000000028
...
RIP: 0010:iwl_pci_remove+0x12/0x30 [iwlwifi]
pci_device_remove+0x3e/0xb0
device_release_driver_internal+0x103/0x1f0
driver_detach+0x4c/0x90
bus_remove_driver+0x5c/0xd0
driver_unregister+0x31/0x50
pci_unregister_driver+0x40/0x90
iwl_pci_unregister_driver+0x15/0x20 [iwlwifi]
__exit_compat+0x9/0x98 [iwlwifi]
__x64_sys_delete_module+0x147/0x260
Signed-off-by: Daniel Gabay <daniel.gabay@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230413213309.082f6e21341b.I0db21d7fa9a828d571ca886713bd0b5d0b6e1e5c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 23acb14af1914010dd0aae1bbb7fab28bf518b8e ]
Fix fout being fopen'ed but then not subsequently fclose'd. In the affected
branch, fout is otherwise going out of scope.
Signed-off-by: Hao Zeng <zenghao@kylinos.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230411084349.1999628-1-zenghao@kylinos.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c9b3649a934d131151111354bcbb638076f03a30 ]
xfstest generic/361 reports a bug as below:
f2fs_bug_on(sbi, sbi->fsync_node_num);
kernel BUG at fs/f2fs/super.c:1627!
RIP: 0010:f2fs_put_super+0x3a8/0x3b0
Call Trace:
generic_shutdown_super+0x8c/0x1b0
kill_block_super+0x2b/0x60
kill_f2fs_super+0x87/0x110
deactivate_locked_super+0x39/0x80
deactivate_super+0x46/0x50
cleanup_mnt+0x109/0x170
__cleanup_mnt+0x16/0x20
task_work_run+0x65/0xa0
exit_to_user_mode_prepare+0x175/0x190
syscall_exit_to_user_mode+0x25/0x50
do_syscall_64+0x4c/0x90
entry_SYSCALL_64_after_hwframe+0x72/0xdc
During umount(), if cp_error is set, f2fs_wait_on_all_pages() should
not stop waiting all F2FS_WB_CP_DATA pages to be writebacked, otherwise,
fsync_node_num can be non-zero after f2fs_wait_on_all_pages() causing
this bug.
In this case, to avoid deadloop in f2fs_wait_on_all_pages(), it needs
to drop all dirty pages rather than redirtying them.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 93cdf49f6eca5e23f6546b8f28457b2e6a6961d9 ]
When the length of best extent found is less than the length of goal extent
we need to make sure that the best extent atleast covers the start of the
original request. This is done by adjusting the ac_b_ex.fe_logical (logical
start) of the extent.
While doing so, the current logic sometimes results in the best extent's
logical range overflowing the goal extent. Since this best extent is later
added to the inode preallocation list, we have a possibility of introducing
overlapping preallocations. This is discussed in detail here [1].
As per Jan's suggestion, to fix this, replace the existing logic with the
below logic for adjusting best extent as it keeps fragmentation in check
while ensuring logical range of best extent doesn't overflow out of goal
extent:
1. Check if best extent can be kept at end of goal range and still cover
original start.
2. Else, check if best extent can be kept at start of goal range and still
cover original start.
3. Else, keep the best extent at start of original request.
Also, add a few extra BUG_ONs that might help catch errors faster.
[1] https://lore.kernel.org/r/Y+OGkVvzPN0RMv0O@li-bb2b2a4c-3307-11b2-a85c-8fa5c3a69313.ibm.com
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/f96aca6d415b36d1f90db86c1a8cd7e2e9d7ab0e.1679731817.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b07ffe6927c75d99af534d685282ea188d9f71a6 ]
We need to set ac_g_ex to notify the goal start used in
ext4_mb_find_by_goal. Set ac_g_ex instead of ac_f_ex in
ext4_mb_normalize_request.
Besides we should assure goal start is in range [first_data_block,
blocks_count) as ext4_mb_initialize_context does.
[ Added a check to make sure size is less than ar->pright; otherwise
we could end up passing an underflowed value of ar->pright - size to
ext4_get_group_no_and_offset(), which will trigger a BUG_ON later on.
- TYT ]
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230303172120.3800725-2-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cfcdb5bad34f600aed7613c3c1a5e618111f77b7 ]
The maximum allowed height of an inode's metadata tree depends on the
filesystem block size; it is lower for bigger-block filesystems. When
reading in an inode, make sure that the height doesn't exceed the
maximum allowed height.
Arrays like sd_heightsize are sized to be big enough for any filesystem
block size; they will often be slightly bigger than what's needed for a
specific filesystem.
Reported-by: syzbot+45d4691b1ed3c48eba05@syzkaller.appspotmail.com
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f486893288f3e9b171b836f43853a6426515d800 ]
mptlan_probe() calls mpt_register_lan_device() which initializes the
&priv->post_buckets_task workqueue. A call to
mpt_lan_wake_post_buckets_task() will subsequently start the work.
During driver unload in mptlan_remove() the following race may occur:
CPU0 CPU1
|mpt_lan_post_receive_buckets_work()
mptlan_remove() |
free_netdev() |
kfree(dev); |
|
| dev->mtu
| //use
Fix this by finishing the work prior to cleaning up in mptlan_remove().
[mkp: we really should remove mptlan instead of attempting to fix it]
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Link: https://lore.kernel.org/r/20230318081635.796479-1-zyytlz.wz@163.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4e0473f1060aa49621d40a113afde24818101d37 ]
When calling irq_set_affinity_notifier() with NULL at the notify
argument, it will cause freeing of the glue pointer in the
corresponding array entry but will leave the pointer in the array. A
subsequent call to free_irq_cpu_rmap() will try to free this entry again
leading to possible use after free.
Fix that by setting NULL to the array entry and checking that we have
non-zero at the array entry when iterating over the array in
free_irq_cpu_rmap().
The current code does not suffer from this since there are no cases
where irq_set_affinity_notifier(irq, NULL) (note the NULL passed for the
notify arg) is called, followed by a call to free_irq_cpu_rmap() so we
don't hit and issue. Subsequent patches in this series excersize this
flow, hence the required fix.
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Eli Cohen <elic@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d8990b5a4d065f38f35d69bcd627ec5a7f8330ca ]
Commands from recovery entries are freed after session has been closed.
That leads to use-after-free at command free or NPE with such call trace:
Time2Retain timer expired for SID: 1, cleaning up iSCSI session.
BUG: kernel NULL pointer dereference, address: 0000000000000140
RIP: 0010:sbitmap_queue_clear+0x3a/0xa0
Call Trace:
target_release_cmd_kref+0xd1/0x1f0 [target_core_mod]
transport_generic_free_cmd+0xd1/0x180 [target_core_mod]
iscsit_free_cmd+0x53/0xd0 [iscsi_target_mod]
iscsit_free_connection_recovery_entries+0x29d/0x320 [iscsi_target_mod]
iscsit_close_session+0x13a/0x140 [iscsi_target_mod]
iscsit_check_post_dataout+0x440/0x440 [iscsi_target_mod]
call_timer_fn+0x24/0x140
Move cleanup of recovery enrties to before session freeing.
Reported-by: Forza <forza@tnonline.net>
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20230319015620.96006-7-michael.christie@oracle.com
Reviewed-by: Maurizio Lombardi <mlombard@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5dd0dfd55baec0742ba8f5625a0dd064aca7db16 ]
When setting the XPS value of a TX queue, warn the user once if the
index of the queue is greater than the number of allocated TX queues.
Previously, this scenario went uncaught. In the best case, it resulted
in unnecessary allocations. In the worst case, it resulted in
out-of-bounds memory references through calls to `netdev_get_tx_queue(
dev, index)`. Therefore, it is important to inform the user but not
worth returning an error and risk downing the netdevice.
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com>
Link: https://lore.kernel.org/r/20230321150725.127229-1-nnac123@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c8384d4a51e7cb0e6587f3143f29099f202c5de1 ]
With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG),
indirect call targets are validated against the expected function
pointer prototype to make sure the call target is valid to help mitigate
ROP attacks. If they are not identical, there is a failure at run time,
which manifests as either a kernel panic or thread getting killed. A
warning in clang aims to catch these at compile time, which reveals:
drivers/net/ethernet/pasemi/pasemi_mac.c:1665:21: error: incompatible function pointer types initializing 'netdev_tx_t (*)(struct sk_buff *, struct net_device *)' (aka 'enum netdev_tx (*)(struct sk_buff *, struct net_device *)') with an expression of type 'int (struct sk_buff *, struct net_device *)' [-Werror,-Wincompatible-function-pointer-types-strict]
.ndo_start_xmit = pasemi_mac_start_tx,
^~~~~~~~~~~~~~~~~~~
1 error generated.
->ndo_start_xmit() in 'struct net_device_ops' expects a return type of
'netdev_tx_t', not 'int'. Adjust the return type of
pasemi_mac_start_tx() to match the prototype's to resolve the warning.
While PowerPC does not currently implement support for kCFI, it could in
the future, which means this warning becomes a fatal CFI failure at run
time.
Link: https://github.com/ClangBuiltLinux/linux/issues/1750
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/20230319-pasemi-incompatible-pointer-types-strict-v1-1-1b9459d8aef0@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c6087b82a9146826564a55c5ca0164cac40348f5 ]
A static code analysis tool flagged the possibility of buffer overflow when
using copy_from_user() for a debugfs entry.
Currently, it is possible that copy_from_user() copies more bytes than what
would fit in the mybuf char array. Add a min() restriction check between
sizeof(mybuf) - 1 and nbytes passed from the userspace buffer to protect
against buffer overflow.
Link: https://lore.kernel.org/r/20230301231626.9621-2-justintee8345@gmail.com
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 62aeb94433fcec80241754b70d0d1836d5926b0a ]
Check that log of block size stored in the superblock has sensible
value. Otherwise the shift computing the block size can overflow leading
to undefined behavior.
Reported-by: syzbot+4fec412f59eba8c01b77@syzkaller.appspotmail.com
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 89b89e52153fda2733562776c7c9d9d3ebf8dd6d ]
Apparently the hex passphrase mechanism does not work on newer
chips/firmware (e.g. BCM4387). It seems there was a simple way of
passing it in binary all along, so use that and avoid the hexification.
OpenBSD has been doing it like this from the beginning, so this should
work on all chips.
Also clear the structure before setting the PMK. This was leaking
uninitialized stack contents to the device.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230214092423.15175-6-marcan@marcan.st
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ae5a0eccc85fc960834dd66e3befc2728284b86c ]
ACPICA commit 0d5f467d6a0ba852ea3aad68663cbcbd43300fd4
ACPI_ALLOCATE_ZEROED may fails, object_info might be null and will cause
null pointer dereference later.
Link: https://github.com/acpica/acpica/commit/0d5f467d
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 05bb0167c80b8f93c6a4e0451b7da9b96db990c2 ]
ACPICA commit 770653e3ba67c30a629ca7d12e352d83c2541b1e
Before this change we see the following UBSAN stack trace in Fuchsia:
#0 0x000021e4213b3302 in acpi_ds_init_aml_walk(struct acpi_walk_state*, union acpi_parse_object*, struct acpi_namespace_node*, u8*, u32, struct acpi_evaluate_info*, u8) ../../third_party/acpica/source/components/dispatcher/dswstate.c:682 <platform-bus-x86.so>+0x233302
#1.2 0x000020d0f660777f in ubsan_get_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:41 <libclang_rt.asan.so>+0x3d77f
#1.1 0x000020d0f660777f in maybe_print_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:51 <libclang_rt.asan.so>+0x3d77f
#1 0x000020d0f660777f in ~scoped_report() compiler-rt/lib/ubsan/ubsan_diag.cpp:387 <libclang_rt.asan.so>+0x3d77f
#2 0x000020d0f660b96d in handlepointer_overflow_impl() compiler-rt/lib/ubsan/ubsan_handlers.cpp:809 <libclang_rt.asan.so>+0x4196d
#3 0x000020d0f660b50d in compiler-rt/lib/ubsan/ubsan_handlers.cpp:815 <libclang_rt.asan.so>+0x4150d
#4 0x000021e4213b3302 in acpi_ds_init_aml_walk(struct acpi_walk_state*, union acpi_parse_object*, struct acpi_namespace_node*, u8*, u32, struct acpi_evaluate_info*, u8) ../../third_party/acpica/source/components/dispatcher/dswstate.c:682 <platform-bus-x86.so>+0x233302
#5 0x000021e4213e2369 in acpi_ds_call_control_method(struct acpi_thread_state*, struct acpi_walk_state*, union acpi_parse_object*) ../../third_party/acpica/source/components/dispatcher/dsmethod.c:605 <platform-bus-x86.so>+0x262369
#6 0x000021e421437fac in acpi_ps_parse_aml(struct acpi_walk_state*) ../../third_party/acpica/source/components/parser/psparse.c:550 <platform-bus-x86.so>+0x2b7fac
#7 0x000021e4214464d2 in acpi_ps_execute_method(struct acpi_evaluate_info*) ../../third_party/acpica/source/components/parser/psxface.c:244 <platform-bus-x86.so>+0x2c64d2
#8 0x000021e4213aa052 in acpi_ns_evaluate(struct acpi_evaluate_info*) ../../third_party/acpica/source/components/namespace/nseval.c:250 <platform-bus-x86.so>+0x22a052
#9 0x000021e421413dd8 in acpi_ns_init_one_device(acpi_handle, u32, void*, void**) ../../third_party/acpica/source/components/namespace/nsinit.c:735 <platform-bus-x86.so>+0x293dd8
#10 0x000021e421429e98 in acpi_ns_walk_namespace(acpi_object_type, acpi_handle, u32, u32, acpi_walk_callback, acpi_walk_callback, void*, void**) ../../third_party/acpica/source/components/namespace/nswalk.c:298 <platform-bus-x86.so>+0x2a9e98
#11 0x000021e4214131ac in acpi_ns_initialize_devices(u32) ../../third_party/acpica/source/components/namespace/nsinit.c:268 <platform-bus-x86.so>+0x2931ac
#12 0x000021e42147c40d in acpi_initialize_objects(u32) ../../third_party/acpica/source/components/utilities/utxfinit.c:304 <platform-bus-x86.so>+0x2fc40d
#13 0x000021e42126d603 in acpi::acpi_impl::initialize_acpi(acpi::acpi_impl*) ../../src/devices/board/lib/acpi/acpi-impl.cc:224 <platform-bus-x86.so>+0xed603
Add a simple check that avoids incrementing a pointer by zero, but
otherwise behaves as before. Note that our findings are against ACPICA
20221020, but the same code exists on master.
Link: https://github.com/acpica/acpica/commit/770653e3
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2429b3c529da29d4277d519bd66d034842dcd70c ]
In tegra_sor_compute_config(), the 32-bit value mode->clock is
multiplied by 1000, and assigned to the u64 variable pclk. We can avoid
a potential 32-bit integer overflow by casting mode->clock to u64 before
we do the arithmetic and assignment.
Signed-off-by: Nur Hussein <hussein@unixcat.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e5b492c6bb900fcf9722e05f4a10924410e170c1 ]
When removing custom query handlers, the handler might still
be used inside the EC query workqueue, causing a kernel oops
if the module holding the callback function was already unloaded.
Fix this by flushing the EC query workqueue when removing
custom query handlers.
Tested on a Acer Travelmate 4002WLMi
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d2c48b2387eb89e0bf2a2e06e30987cf410acad4 ]
Running a preempt-rt (v6.2-rc3-rt1) based kernel on an Ampere Altra
triggers:
BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:46
in_atomic(): 0, irqs_disabled(): 128, non_block: 0, pid: 24, name: cpuhp/0
preempt_count: 0, expected: 0
RCU nest depth: 0, expected: 0
3 locks held by cpuhp/0/24:
#0: ffffda30217c70d0 (cpu_hotplug_lock){++++}-{0:0}, at: cpuhp_thread_fun+0x5c/0x248
#1: ffffda30217c7120 (cpuhp_state-up){+.+.}-{0:0}, at: cpuhp_thread_fun+0x5c/0x248
#2: ffffda3021c711f0 (sdei_list_lock){....}-{3:3}, at: sdei_cpuhp_up+0x3c/0x130
irq event stamp: 36
hardirqs last enabled at (35): [<ffffda301e85b7bc>] finish_task_switch+0xb4/0x2b0
hardirqs last disabled at (36): [<ffffda301e812fec>] cpuhp_thread_fun+0x21c/0x248
softirqs last enabled at (0): [<ffffda301e80b184>] copy_process+0x63c/0x1ac0
softirqs last disabled at (0): [<0000000000000000>] 0x0
CPU: 0 PID: 24 Comm: cpuhp/0 Not tainted 5.19.0-rc3-rt5-[...]
Hardware name: WIWYNN Mt.Jade Server [...]
Call trace:
dump_backtrace+0x114/0x120
show_stack+0x20/0x70
dump_stack_lvl+0x9c/0xd8
dump_stack+0x18/0x34
__might_resched+0x188/0x228
rt_spin_lock+0x70/0x120
sdei_cpuhp_up+0x3c/0x130
cpuhp_invoke_callback+0x250/0xf08
cpuhp_thread_fun+0x120/0x248
smpboot_thread_fn+0x280/0x320
kthread+0x130/0x140
ret_from_fork+0x10/0x20
sdei_cpuhp_up() is called in the STARTING hotplug section,
which runs with interrupts disabled. Use a CPUHP_AP_ONLINE_DYN entry
instead to execute the cpuhp cb later, with preemption enabled.
SDEI originally got its own cpuhp slot to allow interacting
with perf. It got superseded by pNMI and this early slot is not
relevant anymore. [1]
Some SDEI calls (e.g. SDEI_1_0_FN_SDEI_PE_MASK) take actions on the
calling CPU. It is checked that preemption is disabled for them.
_ONLINE cpuhp cb are executed in the 'per CPU hotplug thread'.
Preemption is enabled in those threads, but their cpumask is limited
to 1 CPU.
Move 'WARN_ON_ONCE(preemptible())' statements so that SDEI cpuhp cb
don't trigger them.
Also add a check for the SDEI_1_0_FN_SDEI_PRIVATE_RESET SDEI call
which acts on the calling CPU.
[1]:
https://lore.kernel.org/all/5813b8c5-ae3e-87fd-fccc-94c9cd08816d@arm.com/
Suggested-by: James Morse <james.morse@arm.com>
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/r/20230216084920.144064-1-pierre.gondois@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 63264422785021704c39b38f65a78ab9e4a186d7 ]
In r592_probe, dev->detect_timer was bound with r592_detect_timer.
In r592_irq function, the timer function will be invoked by mod_timer.
If we remove the module which will call hantro_release to make cleanup,
there may be a unfinished work. The possible sequence is as follows,
which will cause a typical UAF bug.
Fix it by canceling the work before cleanup in r592_remove.
CPU0 CPU1
|r592_detect_timer
r592_remove |
memstick_free_host|
put_device; |
kfree(host); |
|
| queue_work
| &host->media_checker //use
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Link: https://lore.kernel.org/r/20230307164338.1246287-1-zyytlz.wz@163.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fd883d79e4dcd2417c2b80756f22a2ff03b0f6e0 ]
There is no sense in doing a cache sync on REGCACHE_NONE regmaps.
Instead of panicking the kernel due to missing cache_ops, return an error
to client driver.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20230313071812.13577-1-alexander.stein@ew.tq-group.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7222f5841ff49709ca666b05ff336776e0664a20 ]
[Why & How]
DC now uses a new commit sequence which is more robust since it
addresses cases where we need to reorganize pipes based on planes and
other parameters. As a result, this new commit sequence reset the DC
state by cleaning plane states and re-creating them accordingly with the
need. For this reason, the dce_transform_set_pixel_storage_depth can be
invoked after a plane state is destroyed and before its re-creation. In
this situation and on DCE devices, DC will hit a condition that will
trigger a dmesg log that looks like this:
Console: switching to colour frame buffer device 240x67
------------[ cut here ]------------
[..]
Hardware name: System manufacturer System Product Name/PRIME X370-PRO, BIOS 5603 07/28/2020
RIP: 0010:dce_transform_set_pixel_storage_depth+0x3f8/0x480 [amdgpu]
[..]
RSP: 0018:ffffc9000202b850 EFLAGS: 00010293
RAX: ffffffffa081d100 RBX: ffff888110790000 RCX: 000000000000000c
RDX: ffff888100bedbf8 RSI: 0000000000001a50 RDI: ffff88810463c900
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000007
R10: 0000000000000001 R11: 0000000000000f00 R12: ffff88810f500010
R13: ffff888100bedbf8 R14: ffff88810f515688 R15: 0000000000000000
FS: 00007ff0159249c0(0000) GS:ffff88840e940000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ff01528e550 CR3: 0000000002a10000 CR4: 00000000003506e0
Call Trace:
<TASK>
? dm_write_reg_func+0x21/0x80 [amdgpu 340dadd3f7c8cf4be11cf0bdc850245e99abe0e8]
dc_stream_set_dither_option+0xfb/0x130 [amdgpu 340dadd3f7c8cf4be11cf0bdc850245e99abe0e8]
amdgpu_dm_crtc_configure_crc_source+0x10b/0x190 [amdgpu 340dadd3f7c8cf4be11cf0bdc850245e99abe0e8]
amdgpu_dm_atomic_commit_tail+0x20a8/0x2a90 [amdgpu 340dadd3f7c8cf4be11cf0bdc850245e99abe0e8]
? free_unref_page_commit+0x98/0x170
? free_unref_page+0xcc/0x150
commit_tail+0x94/0x120
drm_atomic_helper_commit+0x10f/0x140
drm_atomic_commit+0x94/0xc0
? drm_plane_get_damage_clips.cold+0x1c/0x1c
drm_client_modeset_commit_atomic+0x203/0x250
drm_client_modeset_commit_locked+0x56/0x150
drm_client_modeset_commit+0x21/0x40
drm_fb_helper_lastclose+0x42/0x70
amdgpu_driver_lastclose_kms+0xa/0x10 [amdgpu 340dadd3f7c8cf4be11cf0bdc850245e99abe0e8]
drm_release+0xda/0x110
__fput+0x89/0x240
task_work_run+0x5c/0x90
do_exit+0x333/0xae0
do_group_exit+0x2d/0x90
__x64_sys_exit_group+0x14/0x20
do_syscall_64+0x5b/0x80
? exit_to_user_mode_prepare+0x1e/0x140
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7ff016ceaca1
Code: Unable to access opcode bytes at RIP 0x7ff016ceac77.
RSP: 002b:00007ffe7a2357e8 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7
RAX: ffffffffffffffda RBX: 00007ff016e15a00 RCX: 00007ff016ceaca1
RDX: 000000000000003c RSI: 00000000000000e7 RDI: 0000000000000000
RBP: 0000000000000000 R08: ffffffffffffff78 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007ff016e15a00
R13: 0000000000000000 R14: 00007ff016e1aee8 R15: 00007ff016e1af00
</TASK>
Since this issue only happens in a transition state on DC, this commit
replace BREAK_TO_DEBUGGER with DC_LOG_DC.
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e05a5f510f26607616fecdd4ac136310c8bea56b ]
do_recvmmsg() can write to sk->sk_err from multiple threads.
As said before, many other points reading or writing sk_err
need annotations.
Fixes: 34b88a68f26a ("net: Fix use after free in the recvmmsg exit path")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e72eeab542dbf4f544e389e64fa13b82a1b6d003 ]
I received a bug report (no reproducer so far) where we trip over
712 rcu_read_lock();
713 ct_hook = rcu_dereference(nf_ct_hook);
714 BUG_ON(ct_hook == NULL); // here
In nf_conntrack_destroy().
First turn this BUG_ON into a WARN. I think it was triggered
via enable_hooks=1 flag.
When this flag is turned on, the conntrack hooks are registered
before nf_ct_hook pointer gets assigned.
This opens a short window where packets enter the conntrack machinery,
can have skb->_nfct set up and a subsequent kfree_skb might occur
before nf_ct_hook is set.
Call nf_conntrack_init_end() to set nf_ct_hook before we register the
pernet ops.
Fixes: ba3fbe663635 ("netfilter: nf_conntrack: provide modparam to always register conntrack hooks")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
