IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Add sysfs format entries for AMD IBS PMUs:
# find /sys/bus/event_source/devices/ibs_*/format
/sys/bus/event_source/devices/ibs_fetch/format
/sys/bus/event_source/devices/ibs_fetch/format/rand_en
/sys/bus/event_source/devices/ibs_op/format
/sys/bus/event_source/devices/ibs_op/format/cnt_ctl
This allows to specify following IBS options:
$ perf record -e ibs_fetch/rand_en=1/GH ...
$ perf record -e ibs_op/cnt_ctl=1/GH ...
Option cnt_ctl is only enabled if the IBS_CAPS_OPCNT bit is set in IBS
cpuid feature flags (AMD family 10h RevC and above).
Signed-off-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1347447584-28405-1-git-send-email-robert.richter@amd.com
[ Added small readability improvements. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Some PMUs don't provide a full register set for their sample,
specifically 'advanced' PMUs like AMD IBS and Intel PEBS which provide
'better' than regular interrupt accuracy.
In this case we use the interrupt regs as basis and over-write some
fields (typically IP) with different information.
The perf core however uses user_mode() to distinguish user/kernel
samples, user_mode() relies on regs->cs. If the interrupt skid pushed
us over a boundary the new IP might not be in the same domain as the
interrupt.
Commit ce5c1fe9a9 ("perf/x86: Fix USER/KERNEL tagging of samples")
tried to fix this by making the perf core use kernel_ip(). This
however is wrong (TM), as pointed out by Linus, since it doesn't allow
for VM86 and non-zero based segments in IA32 mode.
Therefore, provide a new helper to set the regs->ip field,
set_linear_ip(), which massages the regs into a suitable state
assuming the provided IP is in fact a linear address.
Also modify perf_instruction_pointer() and perf_callchain_user() to
deal with segments base offsets.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1341910954.3462.102.camel@twins
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When disabling ibs there might be the case where hardware continuously
generates interrupts. This is described in erratum #420 (Instruction-
Based Sampling Engine May Generate Interrupt that Cannot Be Cleared).
To avoid this we must clear the counter mask first and then clear the
enable bit. This patch implements this.
See Revision Guide for AMD Family 10h Processors, Publication #41322.
Note: We now keep track of the last read ibs config value which is
then used to disable ibs. To update the config value we pass now a
pointer to the functions reading it.
Signed-off-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1333390758-10893-11-git-send-email-robert.richter@amd.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There are cases where the remaining period is smaller than the minimal
possible value. In this case the counter is restarted with the minimal
period. This is of no use as the interrupt handler will trigger
immediately again and most likely hits itself. This biases the
results.
So, if the remaining period is within the min range, we better do not
restart the counter and instead trigger the overflow.
Signed-off-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1333390758-10893-9-git-send-email-robert.richter@amd.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This patch adds support for precise event sampling with IBS. There are
two counting modes to count either cycles or micro-ops. If the
corresponding performance counter events (hw events) are setup with
the precise flag set, the request is redirected to the ibs pmu:
perf record -a -e cpu-cycles:p ... # use ibs op counting cycle count
perf record -a -e r076:p ... # same as -e cpu-cycles:p
perf record -a -e r0C1:p ... # use ibs op counting micro-ops
Each ibs sample contains a linear address that points to the
instruction that was causing the sample to trigger. With ibs we have
skid 0. Thus, ibs supports precise levels 1 and 2. Samples are marked
with the PERF_EFLAGS_EXACT flag set. In rare cases the rip is invalid
when IBS was not able to record the rip correctly. Then the
PERF_EFLAGS_EXACT flag is cleared and the rip is taken from pt_regs.
V2:
* don't drop samples in precise level 2 if rip is invalid, instead
support the PERF_EFLAGS_EXACT flag
Signed-off-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20120502103309.GP18810@erda.amd.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Fixing profiling at a fixed frequency, in this case the freq value and
sample period was setup incorrectly. Since sampling periods are
adjusted we also allow periods that have lower 4 bits set.
Another fix is the setup of the hw counter: If we modify
hwc->sample_period, we also need to update hwc->last_period and
hwc->period_left.
Signed-off-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1333390758-10893-5-git-send-email-robert.richter@amd.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We always need to pass the last sample period to
perf_sample_data_init(), otherwise the event distribution will be
wrong. Thus, modifiyng the function interface with the required period
as argument. So basically a pattern like this:
perf_sample_data_init(&data, ~0ULL);
data.period = event->hw.last_period;
will now be like that:
perf_sample_data_init(&data, ~0ULL, event->hw.last_period);
Avoids unininitialized data.period and simplifies code.
Signed-off-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1333390758-10893-3-git-send-email-robert.richter@amd.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
A function name represents the pointer to it - no need to take the
address of it. (Fixing this helps us introduce some macro magic
around register_nmi_handler() in the future.)
Cc: Robert Richter <robert.richter@amd.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This patch implements code to handle ibs interrupts. If ibs data
is available a raw perf_event data sample is created and sent
back to the userland. This patch only implements the storage of
ibs data in the raw sample, but this could be extended in a
later patch by generating generic event data such as the rip
from the ibs sampling data.
Signed-off-by: Robert Richter <robert.richter@amd.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1323968199-9326-3-git-send-email-robert.richter@amd.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch implements perf configuration for AMD IBS. The IBS
pmu is selected using the type attribute in sysfs. There are two
types of ibs pmus, for instruction fetch (IBS_FETCH) and for
instruction execution (IBS_OP):
/sys/bus/event_source/devices/ibs_fetch/type
/sys/bus/event_source/devices/ibs_op/type
Except for the sample period IBS can only be set up with raw
config values and raw data samples. The event attributes for the
syscall should be programmed like this (IBS_FETCH):
type = get_pmu_type("/sys/bus/event_source/devices/ibs_fetch/type");
memset(&attr, 0, sizeof(attr));
attr.type = type;
attr.sample_type = PERF_SAMPLE_CPU | PERF_SAMPLE_RAW;
attr.config = IBS_FETCH_CONFIG_DEFAULT;
This implementation does not yet support 64 bit counters. It is
limited to the hardware counter bit width which is 20 bits. 64
bit support can be added later.
Signed-off-by: Robert Richter <robert.richter@amd.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1323968199-9326-2-git-send-email-robert.richter@amd.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
On AMD family 10h we see firmware bug messages like the following:
[Firmware Bug]: cpu 6, try to use APIC500 (LVT offset 0) for vector 0x10400, but the register is already in use for vector 0xf9 on another cpu
[Firmware Bug]: cpu 6, IBS interrupt offset 0 not available (MSRC001103A=0x0000000000000100)
[Firmware Bug]: using offset 1 for IBS interrupts
[Firmware Bug]: workaround enabled for IBS LVT offset
perf: AMD IBS detected (0x00000007)
We always see this, since the offsets are not assigned by the BIOS for
this family. Force LVT offset assignment in this case. If the OS
assignment fails, fallback to BIOS settings and try to setup this.
The fallback to BIOS settings weakens the family check since
force_ibs_eilvt_setup() may fail e.g. in case of virtual machines.
But setup may still succeed if BIOS offsets are correct.
Other families don't have a workaround implemented that assigns LVT
offsets. It's ok, to drop calling force_ibs_eilvt_setup() for that
families.
With the patch the [Firmware Bug] messages vanish. We see now:
IBS: LVT offset 1 assigned
perf: AMD IBS detected (0x00000007)
Signed-off-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20111109162225.GO12451@erda.amd.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
