IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Add driver to handle WMI events, control the keyboard backlight and
bind/unbind the keyboard-touch / digitizer driver so that only one
is active at a time.
It may seem a bit weird to handle the toggling of the modes in the
kernel, but the hw actually expects only 1 device to be active
at a time.
Changes by Hans de Goede:
- Whole bunch of cleanups
- Make the kernel do the driver bind/unbind itself instead of
sending events to userspace and requiring a special userspace
daemon to deal with this
Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com>
Co-developed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211128190031.405620-4-hdegoede@redhat.com
Some WMI implementations do notifies on WMI objects without a _WED method
allow WMI drivers to indicate that _WED should not be called for notifies
on the WMI objects the driver is bound to.
Instead the driver's notify callback will simply be called with a NULL
data argument.
Reported-by: Yauhen Kharuzhy <jekhor@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211128190031.405620-3-hdegoede@redhat.com
The driver core sets struct device->driver before calling out
to the bus' probe() method, this leaves a window where an ACPI
notify may happen on the WMI object before the driver's
probe() method has completed running, causing e.g. the
driver's notify() callback to get called with drvdata
not yet being set leading to a NULL pointer deref.
At a check for this to the WMI core, ensuring that the notify()
callback is not called before the driver is ready.
Fixes: 1686f5444546 ("platform/x86: wmi: Incorporate acpi_install_notify_handler")
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211128190031.405620-2-hdegoede@redhat.com
Replace the wmi_block.read_takes_no_args bool field with
an unsigned long flags field, used together with test_bit()
and friends.
This is a preparation patch for fixing a driver->notify() vs ->probe()
race, which requires atomic flag handling.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211128190031.405620-1-hdegoede@redhat.com
On some AMD hardware laptops, the system fails communicating with the
PMC when entering s2idle and the machine is battery powered.
Hardware description: HP Pavilion Aero Laptop 13-be0097nr
CPU: AMD Ryzen 7 5800U with Radeon Graphics
GPU: 03:00.0 VGA compatible controller [0300]: Advanced Micro Devices,
Inc. [AMD/ATI] Device [1002:1638] (rev c1)
Detailed description of the problem (and investigation) here:
https://gitlab.freedesktop.org/drm/amd/-/issues/1799
Patch is a single line: reduce the polling delay in half, from 100uSec
to 50uSec when waiting for a change in state from the PMC after a
write command operation.
After changing the delay, I did not see a single failure on this
machine (I have this fix for now more than one week and s2idle worked
every single time on battery power).
Cc: stable@vger.kernel.org
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Fabrizio Bertocci <fabriziobertocci@gmail.com>
Link: https://lore.kernel.org/r/CADtzkx7TdfbwtaVEXUdD6YXPey52E-nZVQNs+Z41DTx7gqMqtw@mail.gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
LG uses 5 instead of 0 in the third digit (second digit after 2019)
of the year string to indicate newer models in the same year.
Handle this case as well.
Signed-off-by: Matan Ziv-Av <matan@svgalib.org>
Link: https://lore.kernel.org/r/c752b3b2-9718-bd9a-732d-e165aa8a1fca@svgalib.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Eliminate the following coccicheck warning:
./drivers/platform/x86/asus-wmi.c:2386:2-3: Unneeded semicolon
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/1637719332-45224-1-git-send-email-yang.lee@linux.alibaba.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add the LED_RETAIN_AT_SHUTDOWN flag to the registered led_class_devs so
that the LEDs do not get turned-off when reloading the driver and thus so
that they also stay under default EC control when reloading the driver,
unless explicitly overridden by the user.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211123210524.266705-1-hdegoede@redhat.com
After the recent sysfs-attributes registration cleanups, the
tp_features.sensors_pdev_attrs_registered flag only ever gets set and
never gets read, remove it.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211123210424.266607-6-hdegoede@redhat.com
The hwmon sysfs-attr should show up under the hwmon-classdev, not under
the tpacpi_sensors_pdev. Pass the tpacpi_hwmon_groups attr-groups array
to hwmon_device_register_with_groups() instead of setting
tpacpi_hwmon_pdriver.driver.dev_groups to it to fix this.
This also requires moving the hwmon_device_register_with_groups() call to
after the subdriver init functions have run so that the is_visible()
calls will work properly.
Fixes: 79f960e29cfc ("platform/x86: thinkpad_acpi: Convert platform driver to use dev_groups")
Cc: Len Baker <len.baker@gmx.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211123210424.266607-5-hdegoede@redhat.com
Commit 79f960e29cfc ("platform/x86: thinkpad_acpi: Convert platform driver
to use dev_groups") put the debug_level, interface_version, version and the
THINKPAD_ACPI_DEBUGFACILITIES attributes in a new tpacpi_attr_group and
added those to the tpacpi_groups groups-array which is used to initialize
the driver.dev_groups member.
But before this commit these attributes were registered with
driver_create_file(), so they should be part of the groups-array which is
used to initialize the driver.groups member instead.
And also make the same change for the fan_watchdog hwmon driver attribute.
Fixes: 79f960e29cfc ("platform/x86: thinkpad_acpi: Convert platform driver to use dev_groups")
Cc: Len Baker <len.baker@gmx.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211123210424.266607-4-hdegoede@redhat.com
Commit 79f960e29cfc ("platform/x86: thinkpad_acpi: Convert platform driver
to use dev_groups") introduces the use of driver.dev_groups +
attribute_group.is_visible callbacks replacing the conditional calling of
driver_create_file() for optional attributes.
The is_visible callbacks rely on various tp_features.has_foo flags,
which get set by the subdriver init functions.
But before this fix, thinkpad_acpi_module_init() would call the
subdriver init functions after registering the platform_device and
the tpacpi_pdriver. Which would cause the is_visible callbacks to
get called before the subdriver init functions, which in turn would
cause optional attributes to not get registered at all, even when
the feature is actually present.
Fix this by moving the platform_driver_register(&tpacpi_pdriver) to after
the subdriver init calls; and do the same for the tpacpi_hmon_pdriver.
Fixes: 79f960e29cfc ("platform/x86: thinkpad_acpi: Convert platform driver to use dev_groups")
Cc: Len Baker <len.baker@gmx.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211123210424.266607-3-hdegoede@redhat.com
Commit c99ca78d67a6 ("platform/x86: thinkpad_acpi: Switch to common use
of attributes") removed the conditional adding of the
hotkey_tablet_mode and hotkey_radio_sw sysfs-attributes, replacing this
with a hotkey_attr_is_visible() callback which hides them when the
feature is not present.
But this commit forgot to add these 2 attributes to the default
hotkey_attributes[] set, so they would now never get added at all.
Add the 2 attributes to the default hotkey_attributes[] set so that
they are available on systems with these features once more.
Fixes: c99ca78d67a6 ("platform/x86: thinkpad_acpi: Switch to common use of attributes")
Cc: Len Baker <len.baker@gmx.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211123210424.266607-2-hdegoede@redhat.com
Fix thermal_temp_input_attr sorting. Now that we use is_visible,
rather then registering only part of the thermal_temp_input_attr array,
putting attr 0-7 last is no longer needed.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Tested-by: Mark Pearson <mpearson@lenovo.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211121191129.256713-8-hdegoede@redhat.com
The err_exit label just does a:
return (res < 0) ? res : -ENODEV;
And res is always < 0 when we go there (hotkey_mask_get() returns
either 0 or -EIO), so the goto-s can simply be replaced with
"return res".
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Tested-by: Mark Pearson <mpearson@lenovo.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211121191129.256713-7-hdegoede@redhat.com
The previous refactoring of some code in tpacpi_dytc_profile_init() left
a weirdly indented code-block behind.
Remove the unnecessary '{}' and reduce the indent level one step,
other then changing the indentation the code is completely unchanged.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Tested-by: Mark Pearson <mpearson@lenovo.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211121191129.256713-6-hdegoede@redhat.com
Remove the dytc_profile_available check from dytc_profile_set(),
that function only gets called if the platform_profile_handler was
registered, so the check is not necessary.
Make tpacpi_dytc_profile_init() return -ENODEV when it does not register
the platform_profile() handler this will cause
dytc_profile_driver_data.flags.init to not get set, which in turn will
cause the dytc_profile_exit() call to get skipped.
Together this avoids the need to have the dytc_profile_available
variable at all, since the information is now duplicated in the
dytc_profile_driver_data.flags.init flag.
Note this leaves a weirdly indented code-block behind, this is
deliberately done to make what actually changes in this commit clear.
This will be fixed-up in the next commit.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Tested-by: Mark Pearson <mpearson@lenovo.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211121191129.256713-5-hdegoede@redhat.com
The only reason the proxysensor code needs dytc_version handling is for
proxsensor_attr_is_visible() and that will only ever get called after
all the subdrv init() callbacks have run.
tpacpi_dytc_profile_init() already calls DYTC_CMD_QUERY and is the
primary consumer of dytc_version, so simply let tpacpi_dytc_profile_init()
set dytc_version and remove the now no longer necessary dytc_get_version()
helper and its calls.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Tested-by: Mark Pearson <mpearson@lenovo.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211121191129.256713-4-hdegoede@redhat.com
Make ibm_init_struct.init() callbacks return -ENODEV instead of 1 when
the subdevice / function is not available.
Using -ENODEV clearly states what it going on where as a magic return of
"1" requires a deep dive into the code to figure out what is going on.
This also allows for some cleanups, avoiding the need to translate an
-ENODEV return into "return 1" (which often mistakenly was "return 0").
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Tested-by: Mark Pearson <mpearson@lenovo.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211121191129.256713-3-hdegoede@redhat.com
Commit 79f960e29cfc ("platform/x86: thinkpad_acpi: Convert platform driver
to use dev_groups") accidentally modified tpacpi_kbdlang_init() causing it
to return -ENODEV instead of 0 on machines without kbdlang support
(which are most of them).
ibm_init() sees this -ENODEV as an error causing the entire module to not
load, not good.
Note that technically tpacpi_kbdlang_init() was already buggy before, it
should have returned 1 instead of 0 if the feature is not present.
Rather then fixing tpacpi_kbdlang_init() though, IMHO it is bettter to
just make ibm_init() treat -ENODEV as 1 to fix the issue; and then in
a followup commit also change all the existing "return 1"s from
ibm_init_struct.init() callbacks to "return -ENODEV" as -ENODEV clearly
states what it going on where as a magic return of "1" requires a deep
dive into the code to figure out what is going on.
This will also allow removing some extra ifs to translate -ENODEV to
return 1 in a couple of init() callbacks.
Fixes: 79f960e29cfc ("platform/x86: thinkpad_acpi: Convert platform driver to use dev_groups")
Cc: Len Baker <len.baker@gmx.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211121191129.256713-2-hdegoede@redhat.com
Creating the tlmi_pwd_setting structs can only fail with -ENOMEM, set
ret to this once and simplify the error handling a bit.
Tested-by: Mark Pearson <markpearson@lenovo.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211118114150.271274-2-hdegoede@redhat.com
All callers of tlmi_create_auth() also call
kobject_init(&pwd_setting->kobj, &tlmi_pwd_setting_ktype) on the returned
tlmi_pwd_setting struct. Move this into tlmi_create_auth().
Tested-by: Mark Pearson <markpearson@lenovo.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211118114150.271274-1-hdegoede@redhat.com
Implement Opcode support.
This is available on ThinkCenter and ThinkStations platforms and
gives improved password setting capabilities
Add options to configure System, HDD & NVMe passwords.
HDD & NVMe passwords need a user level (user/master) along with
drive index.
Signed-off-by: Mark Pearson <markpearson@lenovo.com>
Link: https://lore.kernel.org/r/20211117184453.2476-2-markpearson@lenovo.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Newer Lenovo BIOS's have an opcode GUID support interface which provides
- improved password setting control
- ability to set System, hard drive and NVMe passwords
Add the support for these new passwords, and the ability to select
user/master mode and the drive index.
Signed-off-by: Mark Pearson <markpearson@lenovo.com>
Link: https://lore.kernel.org/r/20211117184453.2476-1-markpearson@lenovo.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Rename the device registration function to better align names with the
newly introduced device removal function.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20211028002243.1586083-4-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Use generic client removal function introduced in the previous commit
instead of defining our own one.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20211028002243.1586083-3-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Currently, there are similar functions defined in the Aggregator
Registry and the controller core.
Make client device removal more generic and export it. We can then use
this function later on to remove client devices from device hubs as well
as the controller and avoid re-defining similar things.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20211028002243.1586083-2-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add support for custom fan curves found on some ASUS ROG laptops.
These laptops have the ability to set a custom curve for the CPU
and GPU fans via two ACPI methods.
This patch adds two pwm<N> attributes to the hwmon sysfs,
pwm1 for CPU fan, pwm2 for GPU fan. Both are under the hwmon of the
name `asus_custom_fan_curve`. There is no safety check of the set
fan curves - this must be done in userspace.
The fans have settings [1,2,3] under pwm<N>_enable:
1. Enable and write settings out
2. Disable and use factory fan mode
3. Same as 2, additionally restoring default factory curve.
Use of 2 means that the curve the user has set is still stored and
won't be erased, but the laptop will be using its default auto-fan
mode. Re-enabling the manual mode then activates the curves again.
Notes:
- pwm<N>_enable = 0 is an invalid setting.
- pwm is actually a percentage and is scaled on writing to device.
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20211024033705.5595-2-luke@ljones.dev
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Platform drivers have the option of having the platform core create and
remove any needed sysfs attribute files. So take advantage of that and
refactor the attributes management to avoid to register them "by hand".
Also, due to some attributes are optionals, refactor the code and move
the logic inside the "is_visible" callbacks of the attribute_group
structures.
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Len Baker <len.baker@gmx.com>
Link: https://lore.kernel.org/r/20211023154036.6800-1-len.baker@gmx.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The different values were offset by 1. 0 is for "home mode", 1 for
"web-browser mode", etc. Moreover, the URL to the laptop's user guide
did not work anymore.
Signed-off-by: Vincent Bernat <vincent@bernat.ch>
Link: https://lore.kernel.org/r/20211109195209.176905-1-vincent@bernat.ch
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
When WWAN device wake from S3 deep, under thinkpad platform,
WWAN would be disabled. This disable status could be checked
by command 'nmcli r wwan' or 'rfkill list'.
Issue analysis as below:
When host resume from S3 deep, thinkpad_acpi driver would
call hotkey_resume() function. Finnaly, it will use
wan_get_status to check the current status of WWAN device.
During this resume progress, wan_get_status would always
return off even WWAN boot up completely.
In patch V2, Hans said 'sw_state should be unchanged
after a suspend/resume. It's better to drop the
tpacpi_rfk_update_swstate call all together from the
resume path'.
And it's confimed by Lenovo that GWAN is no longer
available from WHL generation because the design does not
match with current pin control.
Signed-off-by: Slark Xiao <slark_xiao@163.com>
Link: https://lore.kernel.org/r/20211108060648.8212-1-slark_xiao@163.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
A Lenovo ThinkStation S20 (4157CTO BIOS 60KT41AUS) fails to boot on
recent kernels including the think-lmi driver, due to the fact that
errors returned by the tlmi_analyze() function are ignored by
tlmi_probe(), where tlmi_sysfs_init() is called unconditionally.
This results in making use of an array of already freed, non-null
pointers and other uninitialized globals, causing all sorts of nasty
kobject and memory faults.
Make use of the analyze function return value, free a couple leaked
allocations, and remove the settings_count field, which is incremented
but never consumed.
Fixes: a40cd7ef22fb ("platform/x86: think-lmi: Add WMI interface support on Lenovo platforms")
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Mark Gross <markgross@kernel.org>
Reviewed-by: Mark Pearson <markpearson@lenovo.com>
Link: https://lore.kernel.org/r/163639463588.1330483.15850167112490200219.stgit@omen
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
dell-wmi-descriptor only provides symbols to other drivers.
These drivers already select dell-wmi-descriptor when needed.
This fixes an issue where dell-wmi-descriptor is compiled as a module
with localyesconfig on a non-Dell machine.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20211113080551.61860-1-linux@weissschuh.net
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
If 'led_classdev_register()' fails, some additional resources should be
released.
Add the missing 'i8042_remove_filter()' and 'lis3lv02d_remove_fs()' calls
that are already in the remove function but are missing here.
Fixes: a4c724d0723b ("platform: hp_accel: add a i8042 filter to remove HPQ6000 data from kb bus stream")
Fixes: 9e0c79782143 ("lis3lv02d: merge with leds hp disk")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/5a4f218f8f16d2e3a7906b7ca3654ffa946895f8.1636314074.git.christophe.jaillet@wanadoo.fr
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Since the "Add special handling for timer based S0i3 wakeup" changes
the amd-pmc code now relies on symbols from the RTC-class code,
add a dependency for this to Kconfig.
Fixes: 59348401ebed ("platform/x86: amd-pmc: Add special handling for timer based S0i3 wakeup")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20211102153256.76956-1-hdegoede@redhat.com
This code should be using PTR_ERR() instead of IS_ERR(). And because
it's using the wrong "dev->client" pointer, the IS_ERR() check will be
false, meaning the function returns success.
Fixes: 62f9529b8d5c ("platform/mellanox: mlxreg-lc: Add initial support for Nvidia line card devices")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20211110074346.GB5176@kili
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add Kconfig support for -Wimplicit-fallthrough for both GCC and Clang.
The compiler option is under configuration CC_IMPLICIT_FALLTHROUGH,
which is enabled by default.
Special thanks to Nathan Chancellor who fixed the Clang bug[1][2]. This
bugfix only appears in Clang 14.0.0, so older versions still contain
the bug and -Wimplicit-fallthrough won't be enabled for them, for now.
This concludes a long journey and now we are finally getting rid
of the unintentional fallthrough bug-class in the kernel, entirely. :)
Link: 9ed4a94d64 [1]
Link: https://bugs.llvm.org/show_bug.cgi?id=51094 [2]
Link: https://github.com/KSPP/linux/issues/115
Link: https://github.com/ClangBuiltLinux/linux/issues/236
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Co-developed-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Clean up open-coded swap() calls.
* A little bit of #ifdef golf to complete the reunification of the
kernel and userspace libxfs source code.
-----BEGIN PGP SIGNATURE-----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=wsFu
-----END PGP SIGNATURE-----
Merge tag 'xfs-5.16-merge-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs cleanups from Darrick Wong:
"The most 'exciting' aspect of this branch is that the xfsprogs
maintainer and I have worked through the last of the code
discrepancies between kernel and userspace libxfs such that there are
no code differences between the two except for #includes.
IOWs, diff suffices to demonstrate that the userspace tools behave the
same as the kernel, and kernel-only bits are clearly marked in the
/kernel/ source code instead of just the userspace source.
Summary:
- Clean up open-coded swap() calls.
- A little bit of #ifdef golf to complete the reunification of the
kernel and userspace libxfs source code"
* tag 'xfs-5.16-merge-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: sync xfs_btree_split macros with userspace libxfs
xfs: #ifdef out perag code for userspace
xfs: use swap() to make dabtree code cleaner
Fix a build error in stracktrace.c, fix resolving of addresses to
function names in backtraces, fix single-stepping in assembly code
and flush userspace pte's when using set_pte_at().
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCYZAyIAAKCRD3ErUQojoP
X8zUAQCV4fijXlUEOnZorH42QsSvs1SowHXu2YdHU8CmauWVawEAt14Zj3fmMBcS
+uSacieZROU9maQtGgJAYHZVJwgPyQY=
=OQRw
-----END PGP SIGNATURE-----
Merge tag 'for-5.16/parisc-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull more parisc fixes from Helge Deller:
"Fix a build error in stracktrace.c, fix resolving of addresses to
function names in backtraces, fix single-stepping in assembly code and
flush userspace pte's when using set_pte_at()"
* tag 'for-5.16/parisc-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc/entry: fix trace test in syscall exit path
parisc: Flush kernel data mapping in set_pte_at() when installing pte for user page
parisc: Fix implicit declaration of function '__kernel_text_address'
parisc: Fix backtrace to always include init funtion names
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQEcBAABAgAGBQJhkUvoAAoJELcQ+SIFb8HaQG8H/1pF/zhT+xYAK7dMOYfdyl9R
UGgnNGR2kjPDhsAkMHIYWVopP2KFV4kA4TCe8UcEt4GPeWZgGjV8lIaHJa/kdUsH
5tyRYtC8ZtVhJMVJQ8jZYZcTwOqYFFGtCksPq6/j0dHE0Gf+nQStSXNZqi8/XxE9
c3jDg+l7PVwdl7LWFedPVXcflhD5JLrRhyA/17V0INWrqP/MboXGRyq/Yluksw7x
C89ZXrgRE+5tN9icfRT4pl/XBpezWQkjuvsyHM9DWOjqICXfng8yeB5MZ/+R2uyF
qbXRSGqICOFhRRV9m/L0kypCYYiaZ8bBiYvLeGNggmpUJVMosIDFpS7kiYQavuA=
=dnw0
-----END PGP SIGNATURE-----
Merge tag 'sh-for-5.16' of git://git.libc.org/linux-sh
Pull arch/sh updates from Rich Felker.
* tag 'sh-for-5.16' of git://git.libc.org/linux-sh:
sh: pgtable-3level: Fix cast to pointer from integer of different size
sh: fix READ/WRITE redefinition warnings
sh: define __BIG_ENDIAN for math-emu
sh: math-emu: drop unused functions
sh: fix kconfig unmet dependency warning for FRAME_POINTER
sh: Cleanup about SPARSE_IRQ
sh: kdump: add some attribute to function
maple: fix wrong return value of maple_bus_init().
sh: boot: avoid unneeded rebuilds under arch/sh/boot/compressed/
sh: boot: add intermediate vmlinux.bin* to targets instead of extra-y
sh: boards: Fix the cacography in irq.c
sh: check return code of request_irq
sh: fix trivial misannotations
- Fix early_iounmap
- Drop cc-option fallbacks for architecture selection
-----BEGIN PGP SIGNATURE-----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=Ksk/
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM fixes from Russell King:
- Fix early_iounmap
- Drop cc-option fallbacks for architecture selection
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 9156/1: drop cc-option fallbacks for architecture selection
ARM: 9155/1: fix early early_iounmap()
- 2 fixes due to DT node name changes on Arm, Ltd. boards
- Treewide rename of Ingenic CGU headers
- Update ST email addresses
- Remove Netlogic DT bindings
- Dropping few more cases of redundant 'maxItems' in schemas
- Convert toshiba,tc358767 bridge binding to schema
-----BEGIN PGP SIGNATURE-----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=ukBC
-----END PGP SIGNATURE-----
Merge tag 'devicetree-fixes-for-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Two fixes due to DT node name changes on Arm, Ltd. boards
- Treewide rename of Ingenic CGU headers
- Update ST email addresses
- Remove Netlogic DT bindings
- Dropping few more cases of redundant 'maxItems' in schemas
- Convert toshiba,tc358767 bridge binding to schema
* tag 'devicetree-fixes-for-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: watchdog: sunxi: fix error in schema
bindings: media: venus: Drop redundant maxItems for power-domain-names
dt-bindings: Remove Netlogic bindings
clk: versatile: clk-icst: Ensure clock names are unique
of: Support using 'mask' in making device bus id
dt-bindings: treewide: Update @st.com email address to @foss.st.com
dt-bindings: media: Update maintainers for st,stm32-hwspinlock.yaml
dt-bindings: media: Update maintainers for st,stm32-cec.yaml
dt-bindings: mfd: timers: Update maintainers for st,stm32-timers
dt-bindings: timer: Update maintainers for st,stm32-timer
dt-bindings: i2c: imx: hardware do not restrict clock-frequency to only 100 and 400 kHz
dt-bindings: display: bridge: Convert toshiba,tc358767.txt to yaml
dt-bindings: Rename Ingenic CGU headers to ingenic,*.h
timer delivery stops working for a new child task because copy_process()
copies state information which is only valid for the parent task.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmGRDVUTHHRnbHhAbGlu
dXRyb25peC5kZQAKCRCmGPVMDXSYocOFD/42NOdli73N+Jdq7APHUIHXzu+6DVT6
CI5toLQw+0KPoF0s1wg4+J0YCDt2k0Pu4lOabF3Ze/+c6RlR5zfCXESqsXdHaCjh
E91Vs57u0ataRMEHo6KB6eBIutuF8hyxfY6vVXfkTRNAreUIWiwWYrlB0G64JVOG
+/l1W7adovjLcLwcW+ArrnLJwkBKtXunK6PVv2IrdRHwpMHbwoNRCCCFvzkqnWmQ
4Yy2/NaB/PEBK5kezP1/j9EMcGCTWk1JJIm+l/PEwCCcbIgIdUahpW3XHAaqms6R
oukqCvE5ukfmVzBFYBhCamhF8heyEeBVRqGU+Yyk48+I+DQFBCqaqa1NKSuEUdNL
Nycy6Rp1yn7CHVSB461shMS6NJGOSNDBjv7vxer3WjV3HPJu7y0RrN7jXbkSfQnm
hVKjkmbDEYwylgzFE5+T857NqD5MEXeuIBtTO08hNRnpd61aB3x+qq+8ElE6ST8Y
pm6rMzw0AZ5buPK8QdGVDk0dD4WKObj1LzmRZvBtYeWynO6sxyKUl6B2CgAxrvn5
D1Li2/arkJMCVeIuIL5uE6DPoxSh8J7OuEC4KeWX8M8xQSEDImqfZ+tDL2Esv6jv
xDmymq584hiCBc1CJjCOA9kZYe6KNXC7lkVOns6GaKKzLhkrcvUR3dUGhMyzxAMO
t9QIAinR6JwRRA==
=EBbc
-----END PGP SIGNATURE-----
Merge tag 'timers-urgent-2021-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Thomas Gleixner:
"A single fix for POSIX CPU timers to address a problem where POSIX CPU
timer delivery stops working for a new child task because
copy_process() copies state information which is only valid for the
parent task"
* tag 'timers-urgent-2021-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
posix-cpu-timers: Clear task::posix_cputimers_work in copy_process()
- Core code:
A regression fix for the Open Firmware interrupt mapping code where a
interrupt controller property in a node caused a map property in the
same node to be ignored.
- Interrupt chip drivers:
- Workaround a limitation in SiFive PLIC interrupt chip which silently
ignores an EOI when the interrupt line is masked.
- Provide the missing mask/unmask implementation for the CSKY MP
interrupt controller.
- PCI/MSI:
- Prevent a use after free when PCI/MSI interrupts are released by
destroying the sysfs entries before freeing the memory which is
accessed in the sysfs show() function.
- Implement a mask quirk for the Nvidia ION AHCI chip which does not
advertise masking capability despite implementing it. Even worse the
chip comes out of reset with all MSI entries masked, which due to the
missing masking capability never get unmasked.
- Move the check which prevents accessing the MSI[X] masking for XEN
back into the low level accessors. The recent consolidation missed
that these accessors can be invoked from places which do not have
that check which broke XEN. Move them back to he original place
instead of sprinkling tons of these checks all over the code.
-----BEGIN PGP SIGNATURE-----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=LBQL
-----END PGP SIGNATURE-----
Merge tag 'irq-urgent-2021-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"A set of fixes for the interrupt subsystem
Core code:
- A regression fix for the Open Firmware interrupt mapping code where
a interrupt controller property in a node caused a map property in
the same node to be ignored.
Interrupt chip drivers:
- Workaround a limitation in SiFive PLIC interrupt chip which
silently ignores an EOI when the interrupt line is masked.
- Provide the missing mask/unmask implementation for the CSKY MP
interrupt controller.
PCI/MSI:
- Prevent a use after free when PCI/MSI interrupts are released by
destroying the sysfs entries before freeing the memory which is
accessed in the sysfs show() function.
- Implement a mask quirk for the Nvidia ION AHCI chip which does not
advertise masking capability despite implementing it. Even worse
the chip comes out of reset with all MSI entries masked, which due
to the missing masking capability never get unmasked.
- Move the check which prevents accessing the MSI[X] masking for XEN
back into the low level accessors. The recent consolidation missed
that these accessors can be invoked from places which do not have
that check which broke XEN. Move them back to he original place
instead of sprinkling tons of these checks all over the code"
* tag 'irq-urgent-2021-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
of/irq: Don't ignore interrupt-controller when interrupt-map failed
irqchip/sifive-plic: Fixup EOI failed when masked
irqchip/csky-mpintc: Fixup mask/unmask implementation
PCI/MSI: Destroy sysfs before freeing entries
PCI: Add MSI masking quirk for Nvidia ION AHCI
PCI/MSI: Deal with devices lying about their MSI mask capability
PCI/MSI: Move non-mask check back into low level accessors
