IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
[ Upstream commit 43cad521c6d228ea0c51e248f8e5b3a6295a2849 ]
Update cpupower's P-State frequency calculation and reporting with AMD
Family 1Ah+ processors, when using the acpi-cpufreq driver. This is due
to a change in the PStateDef MSR layout in AMD Family 1Ah+.
Tested on 4th and 5th Gen AMD EPYC system
Signed-off-by: Ananth Narayan <Ananth.Narayan@amd.com>
Signed-off-by: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c4bd7f1d78340e63de4d073fd3dbe5391e2996e5 ]
If an error code other than EINVAL, ENODEV or ETIME is returned
by acpi_ec_read() / acpi_ec_write(), then AE_OK is incorrectly
returned by acpi_ec_space_handler().
Fix this by only returning AE_OK on success, and return AE_ERROR
otherwise.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f6f172dc6a6d7775b2df6adfd1350700e9a847ec ]
When a multi-byte address space access is requested, acpi_ec_read()/
acpi_ec_write() is being called multiple times.
Abort such operations if a single call to acpi_ec_read() /
acpi_ec_write() fails, as the data read from / written to the EC
might be incomplete.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5134acb15d9ef27aa2b90aad46d4e89fcef79fdc ]
When building ARCH=loongarch defconfig + CONFIG_UNWINDER_ORC=y using
LLVM, there is a warning from ld.lld when linking the EFI zboot image
due to the use of unreachable() in number() in vsprintf.c:
ld.lld: warning: drivers/firmware/efi/libstub/lib.a(vsprintf.stub.o):(.discard.unreachable+0x0): has non-ABS relocation R_LARCH_32_PCREL against symbol ''
If the compiler cannot eliminate the default case for any reason, the
.discard.unreachable section will remain in the final binary but the
entire point of any section prefixed with .discard is that it is only
used at compile time, so it can be discarded via /DISCARD/ in a linker
script. The asm-generic vmlinux.lds.h includes .discard and .discard.*
in the COMMON_DISCARDS macro but that is not used for zboot.lds, as it
is not a kernel image linker script.
Add .discard and .discard.* to /DISCARD/ in zboot.lds, so that any
sections meant to be discarded at link time are not included in the
final zboot image. This issue is not specific to LoongArch, it is just
the first architecture to select CONFIG_OBJTOOL, which defines
annotate_unreachable() as an asm statement to add the
.discard.unreachable section, and use the EFI stub.
Closes: https://github.com/ClangBuiltLinux/linux/issues/2023
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 78e88472b60936025b83eba57cffa59d3501dc07 ]
If stag work is already scheduled and unload is called, it can lead to
issues as unload cleans up the work element. Wait for stag work to get
completed before cleanup during unload.
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://lore.kernel.org/r/20240515091101.18754-3-skashyap@marvell.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 51071f0831ea975fc045526dd7e17efe669dc6e1 ]
Stag work can cause issues during unload and recovery, hence don't process
it.
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://lore.kernel.org/r/20240515091101.18754-2-skashyap@marvell.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 10157b1fc1a762293381e9145041253420dfc6ad ]
When a host is configured with a few LUNs and I/O is running, injecting FC
faults repeatedly leads to path recovery problems. The LUNs have 4 paths
each and 3 of them come back active after say an FC fault which makes 2 of
the paths go down, instead of all 4. This happens after several iterations
of continuous FC faults.
Reason here is that we're returning an I/O error whenever we're
encountering sense code 06/04/0a (LOGICAL UNIT NOT ACCESSIBLE, ASYMMETRIC
ACCESS STATE TRANSITION) instead of retrying.
[mwilck: The original patch was developed by Rajashekhar M A and Hannes
Reinecke. I moved the code to alua_check_sense() as suggested by Mike
Christie [1]. Evan Milne had raised the question whether pg->state should
be set to transitioning in the UA case [2]. I believe that doing this is
correct. SCSI_ACCESS_STATE_TRANSITIONING by itself doesn't cause I/O
errors. Our handler schedules an RTPG, which will only result in an I/O
error condition if the transitioning timeout expires.]
[1] https://lore.kernel.org/all/0bc96e82-fdda-4187-148d-5b34f81d4942@oracle.com/
[2] https://lore.kernel.org/all/CAGtn9r=kicnTDE2o7Gt5Y=yoidHYD7tG8XdMHEBJTBraVEoOCw@mail.gmail.com/
Co-developed-by: Rajashekhar M A <rajs@netapp.com>
Co-developed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin Wilck <martin.wilck@suse.com>
Link: https://lore.kernel.org/r/20240514140344.19538-1-mwilck@suse.com
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 3cad1bc010416c6dd780643476bc59ed742436b9 upstream.
When fcntl_setlk() races with close(), it removes the created lock with
do_lock_file_wait().
However, LSMs can allow the first do_lock_file_wait() that created the lock
while denying the second do_lock_file_wait() that tries to remove the lock.
In theory (but AFAIK not in practice), posix_lock_file() could also fail to
remove a lock due to GFP_KERNEL allocation failure (when splitting a range
in the middle).
After the bug has been triggered, use-after-free reads will occur in
lock_get_status() when userspace reads /proc/locks. This can likely be used
to read arbitrary kernel memory, but can't corrupt kernel memory.
This only affects systems with SELinux / Smack / AppArmor / BPF-LSM in
enforcing mode and only works from some security contexts.
Fix it by calling locks_remove_posix() instead, which is designed to
reliably get rid of POSIX locks associated with the given file and
files_struct and is also used by filp_flush().
Fixes: c293621bbf67 ("[PATCH] stale POSIX lock handling")
Cc: stable@kernel.org
Link: https://bugs.chromium.org/p/project-zero/issues/detail?id=2563
Signed-off-by: Jann Horn <jannh@google.com>
Link: https://lore.kernel.org/r/20240702-fs-lock-recover-2-v1-1-edd456f63789@google.com
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
[stable fixup: ->c.flc_type was ->fl_type in older kernels]
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2e3f65ccfe6b0778b261ad69c9603ae85f210334 upstream.
In GCC 14, last_stmt() was renamed to last_nondebug_stmt(). Add a helper
macro to handle the renaming.
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 310d6c15e9104c99d5d9d0ff8e5383a79da7d5e6 upstream.
DAMON keeps the number of regions under max_nr_regions by skipping regions
split operations when doing so can make the number higher than the limit.
It works well for preventing violation of the limit. But, if somehow the
violation happens, it cannot recovery well depending on the situation. In
detail, if the real number of regions having different access pattern is
higher than the limit, the mechanism cannot reduce the number below the
limit. In such a case, the system could suffer from high monitoring
overhead of DAMON.
The violation can actually happen. For an example, the user could reduce
max_nr_regions while DAMON is running, to be lower than the current number
of regions. Fix the problem by repeating the merge operations with
increasing aggressiveness in kdamond_merge_regions() for the case, until
the limit is met.
[sj@kernel.org: increase regions merge aggressiveness while respecting min_nr_regions]
Link: https://lkml.kernel.org/r/20240626164753.46270-1-sj@kernel.org
[sj@kernel.org: ensure max threshold attempt for max_nr_regions violation]
Link: https://lkml.kernel.org/r/20240627163153.75969-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20240624175814.89611-1-sj@kernel.org
Fixes: b9a6ac4e4ede ("mm/damon: adaptively adjust regions")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> [5.15+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
(cherry picked from commit 310d6c15e9104c99d5d9d0ff8e5383a79da7d5e6)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 867046cc7027703f60a46339ffde91a1970f2901 upstream.
Allow (for example) min(unsigned_var, 20).
The opposite min(signed_var, 20u) is still errored.
Since a comparison between signed and unsigned never makes the unsigned
value negative it is only necessary to adjust the __types_ok() test.
Link: https://lkml.kernel.org/r/633b64e2f39e46bb8234809c5595b8c7@AcuMS.aculab.com
Signed-off-by: David Laight <david.laight@aculab.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
(cherry picked from commit 867046cc7027703f60a46339ffde91a1970f2901)
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4ead534fba42fc4fd41163297528d2aa731cd121 upstream.
Since 'unsigned char/short' get promoted to 'signed int' it is safe to
compare them against an 'int' value.
Link: https://lkml.kernel.org/r/8732ef5f809c47c28a7be47c938b28d4@AcuMS.aculab.com
Signed-off-by: David Laight <david.laight@aculab.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
(cherry picked from commit 4ead534fba42fc4fd41163297528d2aa731cd121)
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d03eba99f5bf7cbc6e2fdde3b6fa36954ad58e09 upstream.
The type-check in min()/max() is there to stop unexpected results if a
negative value gets converted to a large unsigned value. However it also
rejects 'unsigned int' v 'unsigned long' compares which are common and
never problematc.
Replace the 'same type' check with a 'same signedness' check.
The new test isn't itself a compile time error, so use static_assert() to
report the error and give a meaningful error message.
Due to the way builtin_choose_expr() works detecting the error in the
'non-constant' side (where static_assert() can be used) also detects
errors when the arguments are constant.
Link: https://lkml.kernel.org/r/fe7e6c542e094bfca655abcd323c1c98@AcuMS.aculab.com
Signed-off-by: David Laight <david.laight@aculab.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
(cherry picked from commit d03eba99f5bf7cbc6e2fdde3b6fa36954ad58e09)
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f6e9d38f8eb00ac8b52e6d15f6aa9bcecacb081b upstream.
BUILD_BUG_ON*() macros are defined in build_bug.h. Include it. Replace
compiler_types.h by compiler.h, which provides the former, to have a
definition of the __UNIQUE_ID().
Link: https://lkml.kernel.org/r/20230912092355.79280-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Herve Codina <herve.codina@bootlin.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
(cherry picked from commit f6e9d38f8eb00ac8b52e6d15f6aa9bcecacb081b)
Signed-off-by: SeongJae Park <sj@kernel.org>
[Fix a conflict due to absence of compiler_types.h include]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2122e2a4efc2cd139474079e11939b6e07adfacd upstream.
Currently the clamp algorithm does:
if (val > hi)
val = hi;
if (val < lo)
val = lo;
But since hi > lo by definition, this can be made more efficient with:
if (val > hi)
val = hi;
else if (val < lo)
val = lo;
So fix up the clamp and clamp_t functions to do this, adding the same
argument checking as for min and min_t.
For simple cases, code generation on x86_64 and aarch64 stay about the
same:
before:
cmp edi, edx
mov eax, esi
cmova edi, edx
cmp edi, esi
cmovnb eax, edi
ret
after:
cmp edi, esi
mov eax, edx
cmovnb esi, edi
cmp edi, edx
cmovb eax, esi
ret
before:
cmp w0, w2
csel w8, w0, w2, lo
cmp w8, w1
csel w0, w8, w1, hi
ret
after:
cmp w0, w1
csel w8, w0, w1, hi
cmp w0, w2
csel w0, w8, w2, lo
ret
On MIPS64, however, code generation improves, by removing arithmetic in
the second branch:
before:
sltu $3,$6,$4
bne $3,$0,.L2
move $2,$6
move $2,$4
.L2:
sltu $3,$2,$5
bnel $3,$0,.L7
move $2,$5
.L7:
jr $31
nop
after:
sltu $3,$4,$6
beq $3,$0,.L13
move $2,$6
sltu $3,$4,$5
bne $3,$0,.L12
move $2,$4
.L13:
jr $31
nop
.L12:
jr $31
move $2,$5
For more complex cases with surrounding code, the effects are a bit
more complicated. For example, consider this simplified version of
timestamp_truncate() from fs/inode.c on x86_64:
struct timespec64 timestamp_truncate(struct timespec64 t, struct inode *inode)
{
struct super_block *sb = inode->i_sb;
unsigned int gran = sb->s_time_gran;
t.tv_sec = clamp(t.tv_sec, sb->s_time_min, sb->s_time_max);
if (t.tv_sec == sb->s_time_max || t.tv_sec == sb->s_time_min)
t.tv_nsec = 0;
return t;
}
before:
mov r8, rdx
mov rdx, rsi
mov rcx, QWORD PTR [r8]
mov rax, QWORD PTR [rcx+8]
mov rcx, QWORD PTR [rcx+16]
cmp rax, rdi
mov r8, rcx
cmovge rdi, rax
cmp rdi, rcx
cmovle r8, rdi
cmp rax, r8
je .L4
cmp rdi, rcx
jge .L4
mov rax, r8
ret
.L4:
xor edx, edx
mov rax, r8
ret
after:
mov rax, QWORD PTR [rdx]
mov rdx, QWORD PTR [rax+8]
mov rax, QWORD PTR [rax+16]
cmp rax, rdi
jg .L6
mov r8, rax
xor edx, edx
.L2:
mov rax, r8
ret
.L6:
cmp rdx, rdi
mov r8, rdi
cmovge r8, rdx
cmp rax, r8
je .L4
xor eax, eax
cmp rdx, rdi
cmovl rax, rsi
mov rdx, rax
mov rax, r8
ret
.L4:
xor edx, edx
jmp .L2
In this case, we actually gain a branch, unfortunately, because the
compiler's replacement axioms no longer as cleanly apply.
So all and all, this change is a bit of a mixed bag.
Link: https://lkml.kernel.org/r/20220926133435.1333846-2-Jason@zx2c4.com
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
(cherry picked from commit 2122e2a4efc2cd139474079e11939b6e07adfacd)
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5efcecd9a3b18078d3398b359a84c83f549e22cf upstream.
The clamp family of functions only makes sense if hi>=lo. If hi and lo
are compile-time constants, then raise a build error. Doing so has
already caught buggy code. This also introduces the infrastructure to
improve the clamping function in subsequent commits.
[akpm@linux-foundation.org: coding-style cleanups]
[akpm@linux-foundation.org: s@&&\@&& \@]
Link: https://lkml.kernel.org/r/20220926133435.1333846-1-Jason@zx2c4.com
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
(cherry picked from commit 5efcecd9a3b18078d3398b359a84c83f549e22cf)
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9852f47ac7c993990317570ff125e30ad901e213 ]
After [1] in upstream LLVM, ld.lld's version output became slightly
different when the cmake configuration option LLVM_APPEND_VC_REV is
disabled.
Before:
Debian LLD 19.0.0 (compatible with GNU linkers)
After:
Debian LLD 19.0.0, compatible with GNU linkers
This results in ld-version.sh failing with
scripts/ld-version.sh: 18: arithmetic expression: expecting EOF: "10000 * 19 + 100 * 0 + 0,"
because the trailing comma is included in the patch level part of the
expression. While [1] has been partially reverted in [2] to avoid this
breakage (as it impacts the configuration stage and it is present in all
LTS branches), it would be good to make ld-version.sh more robust
against such miniscule changes like this one.
Use POSIX shell parameter expansion [3] to remove the largest suffix
after just numbers and periods, replacing of the current removal of
everything after a hyphen. ld-version.sh continues to work for a number
of distributions (Arch Linux, Debian, and Fedora) and the kernel.org
toolchains and no longer errors on a version of ld.lld with [1].
Fixes: 02aff8592204 ("kbuild: check the minimum linker version in Kconfig")
Link: 0f9fbbb63c [1]
Link: 649cdfc4b6 [2]
Link: https://pubs.opengroup.org/onlinepubs/9699919799/utilities/V3_chap02.html [3]
Suggested-by: Fangrui Song <maskray@google.com>
Reviewed-by: Fangrui Song <maskray@google.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ac8b270b61d48fcc61f052097777e3b5e11591e0 ]
When BHI mitigation is enabled, if SYSENTER is invoked with the TF flag set
then entry_SYSENTER_compat() uses CLEAR_BRANCH_HISTORY and calls the
clear_bhb_loop() before the TF flag is cleared. This causes the #DB handler
(exc_debug_kernel()) to issue a warning because single-step is used outside the
entry_SYSENTER_compat() function.
To address this issue, entry_SYSENTER_compat() should use CLEAR_BRANCH_HISTORY
after making sure the TF flag is cleared.
The problem can be reproduced with the following sequence:
$ cat sysenter_step.c
int main()
{ asm("pushf; pop %ax; bts $8,%ax; push %ax; popf; sysenter"); }
$ gcc -o sysenter_step sysenter_step.c
$ ./sysenter_step
Segmentation fault (core dumped)
The program is expected to crash, and the #DB handler will issue a warning.
Kernel log:
WARNING: CPU: 27 PID: 7000 at arch/x86/kernel/traps.c:1009 exc_debug_kernel+0xd2/0x160
...
RIP: 0010:exc_debug_kernel+0xd2/0x160
...
Call Trace:
<#DB>
? show_regs+0x68/0x80
? __warn+0x8c/0x140
? exc_debug_kernel+0xd2/0x160
? report_bug+0x175/0x1a0
? handle_bug+0x44/0x90
? exc_invalid_op+0x1c/0x70
? asm_exc_invalid_op+0x1f/0x30
? exc_debug_kernel+0xd2/0x160
exc_debug+0x43/0x50
asm_exc_debug+0x1e/0x40
RIP: 0010:clear_bhb_loop+0x0/0xb0
...
</#DB>
<TASK>
? entry_SYSENTER_compat_after_hwframe+0x6e/0x8d
</TASK>
[ bp: Massage commit message. ]
Fixes: 7390db8aea0d ("x86/bhi: Add support for clearing branch history at syscall entry")
Reported-by: Suman Maity <suman.m.maity@oracle.com>
Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/20240524070459.3674025-1-alexandre.chartre@oracle.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eb43c9b1517b48e2ff0d3a584aca197338987d7b ]
This comment comes from a time when the kernel attempted to use SYSRET
on all returns to userspace, including interrupts and exceptions. Ever
since commit fffbb5dc ("Move opportunistic sysret code to syscall code
path"), SYSRET is only used for returning from system calls. The
specific tracing issue listed in this comment is not possible anymore.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20230721161018.50214-2-brgerst@gmail.com
Stable-dep-of: ac8b270b61d4 ("x86/bhi: Avoid warning in #DB handler due to BHI mitigation")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fea6b5ebb71a2830b042e42de7ae255017ac3ce8 ]
We should allow RXDMA only if the reset was really successful, so clear
the flag after the reset call.
Fixes: 0e864b552b23 ("i2c: rcar: reset controller is mandatory for Gen3+")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 119736c7af442ab398dbb806865988c98ef60d46 ]
The to-be-fixed commit rightfully prevented that the registers will be
cleared. However, the index must be cleared. Otherwise a read message
will re-issue the last work. Fix it and add a comment describing the
situation.
Fixes: c422b6a63024 ("i2c: testunit: don't erase registers after STOP")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ea5ea84c9d3570dc06e8fc5ee2273eaa584aa3ac ]
R-Car Gen3+ needs a reset before every controller transfer. That erases
configuration of a potentially in parallel running local target
instance. To avoid this disruption, avoid controller transfers if a
local target is running. Also, disable SMBusHostNotify because it
requires being a controller and local target at the same time.
Fixes: 3b770017b03a ("i2c: rcar: handle RXDMA HW behaviour on Gen3")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2b523c46e81ebd621515ab47117f95de197dfcbf ]
So far, we treated Gen4 as Gen3. But we are soon adding FM+ as a Gen4
specific feature, so prepare the code for the new devtype.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Stable-dep-of: ea5ea84c9d35 ("i2c: rcar: ensure Gen3+ reset does not disturb local targets")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0e864b552b2302e40b2277629ebac79544a5c433 ]
Initially, we only needed a reset controller to make sure RXDMA works at
least once per transfer. Meanwhile, documentation has been updated. It
now says that a reset has to be performed prior every transaction, even
if it is non-DMA. So, make the reset controller a requirement instead of
being optional. And bail out if resetting fails.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Stable-dep-of: ea5ea84c9d35 ("i2c: rcar: ensure Gen3+ reset does not disturb local targets")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bd9f5348089b65612e5ca976e2ae22f005340331 ]
I2C core handles the local target for receiving HostNotify alerts. There
is no separate driver bound to that address. That means userspace can
access it if desired, leading to further complications if controllers
are not capable of reading their own local target. Bind the local target
to the dummy driver so it will be marked as "handled by the kernel" if
the HostNotify feature is used. That protects aginst userspace access
and prevents other drivers binding to it.
Fixes: 2a71593da34d ("i2c: smbus: add core function handling SMBus host-notify")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4e36c0f20cb1c74c7bd7ea31ba432c1c4a989031 ]
When probing, the hardware is not brought into a known state. This may
be a problem when a hypervisor restarts Linux without resetting the
hardware, leaving an old state running. Make sure the hardware gets
initialized, especially interrupts should be cleared and disabled.
Reported-by: Dirk Behme <dirk.behme@de.bosch.com>
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Closes: https://lore.kernel.org/r/20240702045535.2000393-1-dirk.behme@de.bosch.com
Fixes: 6ccbe607132b ("i2c: add Renesas R-Car I2C driver")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit ddae0ca2a8fe12d0e24ab10ba759c3fbd755ada8 upstream.
It was reported that in moving to 6.1, a larger then 10%
regression was seen in the performance of
clock_gettime(CLOCK_THREAD_CPUTIME_ID,...).
Using a simple reproducer, I found:
5.10:
100000000 calls in 24345994193 ns => 243.460 ns per call
100000000 calls in 24288172050 ns => 242.882 ns per call
100000000 calls in 24289135225 ns => 242.891 ns per call
6.1:
100000000 calls in 28248646742 ns => 282.486 ns per call
100000000 calls in 28227055067 ns => 282.271 ns per call
100000000 calls in 28177471287 ns => 281.775 ns per call
The cause of this was finally narrowed down to the addition of
psi_account_irqtime() in update_rq_clock_task(), in commit
52b1364ba0b1 ("sched/psi: Add PSI_IRQ to track IRQ/SOFTIRQ
pressure").
In my initial attempt to resolve this, I leaned towards moving
all accounting work out of the clock_gettime() call path, but it
wasn't very pretty, so it will have to wait for a later deeper
rework. Instead, Peter shared this approach:
Rework psi_account_irqtime() to use its own psi_irq_time base
for accounting, and move it out of the hotpath, calling it
instead from sched_tick() and __schedule().
In testing this, we found the importance of ensuring
psi_account_irqtime() is run under the rq_lock, which Johannes
Weiner helpfully explained, so also add some lockdep annotations
to make that requirement clear.
With this change the performance is back in-line with 5.10:
6.1+fix:
100000000 calls in 24297324597 ns => 242.973 ns per call
100000000 calls in 24318869234 ns => 243.189 ns per call
100000000 calls in 24291564588 ns => 242.916 ns per call
Reported-by: Jimmy Shiu <jimmyshiu@google.com>
Originally-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev>
Reviewed-by: Qais Yousef <qyousef@layalina.io>
Link: https://lore.kernel.org/r/20240618215909.4099720-1-jstultz@google.com
Fixes: 52b1364ba0b1 ("sched/psi: Add PSI_IRQ to track IRQ/SOFTIRQ pressure")
[jstultz: Fixed up minor collisions w/ 6.1-stable]
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a9e1ddc09ca55746079cc479aa3eb6411f0d99d4 upstream.
Syzbot reported that in rename directory operation on broken directory on
nilfs2, __block_write_begin_int() called to prepare block write may fail
BUG_ON check for access exceeding the folio/page size.
This is because nilfs_dotdot(), which gets parent directory reference
entry ("..") of the directory to be moved or renamed, does not check
consistency enough, and may return location exceeding folio/page size for
broken directories.
Fix this issue by checking required directory entries ("." and "..") in
the first chunk of the directory in nilfs_dotdot().
Link: https://lkml.kernel.org/r/20240628165107.9006-1-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+d3abed1ad3d367fa2627@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=d3abed1ad3d367fa2627
Fixes: 2ba466d74ed7 ("nilfs2: directory entry operations")
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6715df8d5d24655b9fd368e904028112b54c7de1 upstream.
This commits updates the following functions to allow reads from
uninitialized stack locations when env->allow_uninit_stack option is
enabled:
- check_stack_read_fixed_off()
- check_stack_range_initialized(), called from:
- check_stack_read_var_off()
- check_helper_mem_access()
Such change allows to relax logic in stacksafe() to treat STACK_MISC
and STACK_INVALID in a same way and make the following stack slot
configurations equivalent:
| Cached state | Current state |
| stack slot | stack slot |
|------------------+------------------|
| STACK_INVALID or | STACK_INVALID or |
| STACK_MISC | STACK_SPILL or |
| | STACK_MISC or |
| | STACK_ZERO or |
| | STACK_DYNPTR |
This leads to significant verification speed gains (see below).
The idea was suggested by Andrii Nakryiko [1] and initial patch was
created by Alexei Starovoitov [2].
Currently the env->allow_uninit_stack is allowed for programs loaded
by users with CAP_PERFMON or CAP_SYS_ADMIN capabilities.
A number of test cases from verifier/*.c were expecting uninitialized
stack access to be an error. These test cases were updated to execute
in unprivileged mode (thus preserving the tests).
The test progs/test_global_func10.c expected "invalid indirect read
from stack" error message because of the access to uninitialized
memory region. This error is no longer possible in privileged mode.
The test is updated to provoke an error "invalid indirect access to
stack" because of access to invalid stack address (such error is not
verified by progs/test_global_func*.c series of tests).
The following tests had to be removed because these can't be made
unprivileged:
- verifier/sock.c:
- "sk_storage_get(map, skb->sk, &stack_value, 1): partially init
stack_value"
BPF_PROG_TYPE_SCHED_CLS programs are not executed in unprivileged mode.
- verifier/var_off.c:
- "indirect variable-offset stack access, max_off+size > max_initialized"
- "indirect variable-offset stack access, uninitialized"
These tests verify that access to uninitialized stack values is
detected when stack offset is not a constant. However, variable
stack access is prohibited in unprivileged mode, thus these tests
are no longer valid.
* * *
Here is veristat log comparing this patch with current master on a
set of selftest binaries listed in tools/testing/selftests/bpf/veristat.cfg
and cilium BPF binaries (see [3]):
$ ./veristat -e file,prog,states -C -f 'states_pct<-30' master.log current.log
File Program States (A) States (B) States (DIFF)
-------------------------- -------------------------- ---------- ---------- ----------------
bpf_host.o tail_handle_ipv6_from_host 349 244 -105 (-30.09%)
bpf_host.o tail_handle_nat_fwd_ipv4 1320 895 -425 (-32.20%)
bpf_lxc.o tail_handle_nat_fwd_ipv4 1320 895 -425 (-32.20%)
bpf_sock.o cil_sock4_connect 70 48 -22 (-31.43%)
bpf_sock.o cil_sock4_sendmsg 68 46 -22 (-32.35%)
bpf_xdp.o tail_handle_nat_fwd_ipv4 1554 803 -751 (-48.33%)
bpf_xdp.o tail_lb_ipv4 6457 2473 -3984 (-61.70%)
bpf_xdp.o tail_lb_ipv6 7249 3908 -3341 (-46.09%)
pyperf600_bpf_loop.bpf.o on_event 287 145 -142 (-49.48%)
strobemeta.bpf.o on_event 15915 4772 -11143 (-70.02%)
strobemeta_nounroll2.bpf.o on_event 17087 3820 -13267 (-77.64%)
xdp_synproxy_kern.bpf.o syncookie_tc 21271 6635 -14636 (-68.81%)
xdp_synproxy_kern.bpf.o syncookie_xdp 23122 6024 -17098 (-73.95%)
-------------------------- -------------------------- ---------- ---------- ----------------
Note: I limited selection by states_pct<-30%.
Inspection of differences in pyperf600_bpf_loop behavior shows that
the following patch for the test removes almost all differences:
- a/tools/testing/selftests/bpf/progs/pyperf.h
+ b/tools/testing/selftests/bpf/progs/pyperf.h
@ -266,8 +266,8 @ int __on_event(struct bpf_raw_tracepoint_args *ctx)
}
if (event->pthread_match || !pidData->use_tls) {
- void* frame_ptr;
- FrameData frame;
+ void* frame_ptr = 0;
+ FrameData frame = {};
Symbol sym = {};
int cur_cpu = bpf_get_smp_processor_id();
W/o this patch the difference comes from the following pattern
(for different variables):
static bool get_frame_data(... FrameData *frame ...)
{
...
bpf_probe_read_user(&frame->f_code, ...);
if (!frame->f_code)
return false;
...
bpf_probe_read_user(&frame->co_name, ...);
if (frame->co_name)
...;
}
int __on_event(struct bpf_raw_tracepoint_args *ctx)
{
FrameData frame;
...
get_frame_data(... &frame ...) // indirectly via a bpf_loop & callback
...
}
SEC("raw_tracepoint/kfree_skb")
int on_event(struct bpf_raw_tracepoint_args* ctx)
{
...
ret |= __on_event(ctx);
ret |= __on_event(ctx);
...
}
With regards to value `frame->co_name` the following is important:
- Because of the conditional `if (!frame->f_code)` each call to
__on_event() produces two states, one with `frame->co_name` marked
as STACK_MISC, another with it as is (and marked STACK_INVALID on a
first call).
- The call to bpf_probe_read_user() does not mark stack slots
corresponding to `&frame->co_name` as REG_LIVE_WRITTEN but it marks
these slots as BPF_MISC, this happens because of the following loop
in the check_helper_call():
for (i = 0; i < meta.access_size; i++) {
err = check_mem_access(env, insn_idx, meta.regno, i, BPF_B,
BPF_WRITE, -1, false);
if (err)
return err;
}
Note the size of the write, it is a one byte write for each byte
touched by a helper. The BPF_B write does not lead to write marks
for the target stack slot.
- Which means that w/o this patch when second __on_event() call is
verified `if (frame->co_name)` will propagate read marks first to a
stack slot with STACK_MISC marks and second to a stack slot with
STACK_INVALID marks and these states would be considered different.
[1] https://lore.kernel.org/bpf/CAEf4BzY3e+ZuC6HUa8dCiUovQRg2SzEk7M-dSkqNZyn=xEmnPA@mail.gmail.com/
[2] https://lore.kernel.org/bpf/CAADnVQKs2i1iuZ5SUGuJtxWVfGYR9kDgYKhq3rNV+kBLQCu7rA@mail.gmail.com/
[3] git@github.com:anakryiko/cilium.git
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Co-developed-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230219200427.606541-2-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Maxim Mikityanskiy <maxim@isovalent.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The linux-6.1-y backport of commit b377c66ae350 ("x86/retpoline: Add
NOENDBR annotation to the SRSO dummy return thunk") misplaced the new
NOENDBR annotation, repeating the annotation on __x86_return_thunk,
rather than adding the annotation to the !CONFIG_CPU_SRSO version of
srso_alias_untrain_ret, as intended.
Move the annotation to the right place.
Fixes: b377c66ae350 ("x86/retpoline: Add NOENDBR annotation to the SRSO dummy return thunk")
Reported-by: Greg Thelen <gthelen@google.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e7f0be3f09c6e955dc8009129862b562d8b64513 upstream.
User is passing capability ioctl structure(argp) to get DSP
capabilities. This argp is copied to a local structure to get domain
and attribute_id information. After getting the capability, only
capability value is getting copied to user argp which will not be
useful if the use is trying to get the capability by checking the
capability member of fastrpc_ioctl_capability structure. Copy the
complete capability structure so that user can get the capability
value from the expected member of the structure.
Fixes: 6c16fd8bdd40 ("misc: fastrpc: Add support to get DSP capabilities")
Cc: stable <stable@kernel.org>
Signed-off-by: Ekansh Gupta <quic_ekangupt@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240628114501.14310-3-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bfb6b07d2a30ffe98864d8cfc31fc00470063025 upstream.
When user is requesting for DSP capability, the process pd type is
getting updated to USER_PD which is incorrect as DSP will assume the
process which is making the request is a user PD and this will never
get updated back to the original value. The actual PD type should not
be updated for capability request and it should be serviced by the
respective PD on DSP side. Don't change process's PD type for DSP
capability request.
Fixes: 6c16fd8bdd40 ("misc: fastrpc: Add support to get DSP capabilities")
Cc: stable <stable@kernel.org>
Signed-off-by: Ekansh Gupta <quic_ekangupt@quicinc.com>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240628114501.14310-4-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4cb7915f0a35e2fcc4be60b912c4be35cd830957 upstream.
The DSP capability request call expects 2 arguments. First is the
information about the total number of attributes to be copied from
DSP and second is the information about the buffer where the DSP
needs to copy the information. The current design is passing the
information about the size to be copied from DSP which would be
considered as a bad argument to the call by DSP causing a failure
suggesting the same. The second argument carries the information
about the buffer where the DSP needs to copy the capability
information and the size to be copied. As the first entry of
capability attribute is getting skipped, same should also be
considered while sending the information to DSP. Add changes to
pass proper arguments to DSP.
Fixes: 6c16fd8bdd40 ("misc: fastrpc: Add support to get DSP capabilities")
Cc: stable <stable@kernel.org>
Signed-off-by: Ekansh Gupta <quic_ekangupt@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240628114501.14310-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 948f991c62a4018fb81d85804eeab3029c6209f8 upstream.
On the parisc platform, the kernel issues kernel warnings because
swap_endian() tries to load a 128-bit IPv6 address from an unaligned
memory location:
Kernel: unaligned access to 0x55f4688c in wg_allowedips_insert_v6+0x2c/0x80 [wireguard] (iir 0xf3010df)
Kernel: unaligned access to 0x55f46884 in wg_allowedips_insert_v6+0x38/0x80 [wireguard] (iir 0xf2010dc)
Avoid such unaligned memory accesses by instead using the
get_unaligned_be64() helper macro.
Signed-off-by: Helge Deller <deller@gmx.de>
[Jason: replace src[8] in original patch with src+8]
Cc: stable@vger.kernel.org
Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://patch.msgid.link/20240704154517.1572127-3-Jason@zx2c4.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2cb489eb8dfc291060516df313ff31f4f9f3d794 upstream.
QEMU 9.0 removed -no-acpi, in favor of machine properties, so update the
Makefile to use the correct QEMU invocation.
Cc: stable@vger.kernel.org
Fixes: b83fdcd9fb8a ("wireguard: selftests: use microvm on x86")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://patch.msgid.link/20240704154517.1572127-2-Jason@zx2c4.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 233323f9b9f828cd7cd5145ad811c1990b692542 upstream.
The acpi_cst_latency_cmp() comparison function currently used for
sorting C-state latencies does not satisfy transitivity, causing
incorrect sorting results.
Specifically, if there are two valid acpi_processor_cx elements A and B
and one invalid element C, it may occur that A < B, A = C, and B = C.
Sorting algorithms assume that if A < B and A = C, then C < B, leading
to incorrect ordering.
Given the small size of the array (<=8), we replace the library sort
function with a simple insertion sort that properly ignores invalid
elements and sorts valid ones based on latency. This change ensures
correct ordering of the C-state latencies.
Fixes: 65ea8f2c6e23 ("ACPI: processor idle: Fix up C-state latency if not ordered")
Reported-by: Julian Sikorski <belegdol@gmail.com>
Closes: https://lore.kernel.org/lkml/70674dc7-5586-4183-8953-8095567e73df@gmail.com
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Tested-by: Julian Sikorski <belegdol@gmail.com>
Cc: All applicable <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240701205639.117194-1-visitorckw@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 69c7b2fe4c9cc1d3b1186d1c5606627ecf0de883 upstream.
The way the delayed work is handled in ceph_monc_stop() is prone to
races with mon_fault() and possibly also finish_hunting(). Both of
these can requeue the delayed work which wouldn't be canceled by any of
the following code in case that happens after cancel_delayed_work_sync()
runs -- __close_session() doesn't mess with the delayed work in order
to avoid interfering with the hunting interval logic. This part was
missed in commit b5d91704f53e ("libceph: behave in mon_fault() if
cur_mon < 0") and use-after-free can still ensue on monc and objects
that hang off of it, with monc->auth and monc->monmap being
particularly susceptible to quickly being reused.
To fix this:
- clear monc->cur_mon and monc->hunting as part of closing the session
in ceph_monc_stop()
- bail from delayed_work() if monc->cur_mon is cleared, similar to how
it's done in mon_fault() and finish_hunting() (based on monc->hunting)
- call cancel_delayed_work_sync() after the session is closed
Cc: stable@vger.kernel.org
Link: https://tracker.ceph.com/issues/66857
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1723f04caacb32cadc4e063725d836a0c4450694 upstream.
Currently if we request a feature that is not set in the Kernel config we
fail silently and return all the available features. However, the man
page indicates we should return an EINVAL.
We need to fix this issue since we can end up with a Kernel warning should
a program request the feature UFFD_FEATURE_WP_UNPOPULATED on a kernel with
the config not set with this feature.
[ 200.812896] WARNING: CPU: 91 PID: 13634 at mm/memory.c:1660 zap_pte_range+0x43d/0x660
[ 200.820738] Modules linked in:
[ 200.869387] CPU: 91 PID: 13634 Comm: userfaultfd Kdump: loaded Not tainted 6.9.0-rc5+ #8
[ 200.877477] Hardware name: Dell Inc. PowerEdge R6525/0N7YGH, BIOS 2.7.3 03/30/2022
[ 200.885052] RIP: 0010:zap_pte_range+0x43d/0x660
Link: https://lkml.kernel.org/r/20240626130513.120193-1-audra@redhat.com
Fixes: e06f1e1dd499 ("userfaultfd: wp: enabled write protection in userfaultfd API")
Signed-off-by: Audra Mitchell <audra@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Rafael Aquini <raquini@redhat.com>
Cc: Shaohua Li <shli@fb.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6db03b1929e207d2c6e84e75a9cd78124b3d6c6d upstream.
The internal mic boost on the VAIO models VJFE-CL and VJFE-IL is too high.
Fix this by applying the ALC269_FIXUP_LIMIT_INT_MIC_BOOST fixup to the machine
to limit the gain.
Signed-off-by: Edson Juliano Drosdeck <edson.drosdeck@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240705141012.5368-1-edson.drosdeck@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b46953029c52bd3a3306ff79f631418b75384656 upstream.
HP 250 G7 has a mute LED that can be made to work using quirk
ALC269_FIXUP_HP_LINE1_MIC1_LED. Enable already existing quirk.
Signed-off-by: Nazar Bilinskyi <nbilinskyi@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240709080546.18344-1-nbilinskyi@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b6e02c6b0377d4339986e07aeb696c632cd392aa upstream.
In order to use toshiba_dmi_quirks[] together with the standard DMI
matching functions, it must be terminated by a empty entry.
Since this entry is missing, an array out-of-bounds access occurs
every time the quirk list is processed.
Fix this by adding the terminating empty entry.
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202407091536.8b116b3d-lkp@intel.com
Fixes: 3cb1f40dfdc3 ("drivers/platform: toshiba_acpi: Call HCI_PANEL_POWER_ON on resume on some models")
Cc: stable@vger.kernel.org
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20240709143851.10097-1-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0ba424c934fd43dccf0d597e1ae8851f07cb2edf upstream.
bin_attr_nvmem_eeprom_compat is the template from which all future
compat attributes are created.
Changing it means to change all subsquent compat attributes, too.
Instead only use the "fram" name for the currently registered attribute.
Fixes: fd307a4ad332 ("nvmem: prepare basics for FRAM support")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240628113704.13742-4-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7a0a6d0a7c805f9380381f4deedffdf87b93f408 upstream.
Read/write callbacks registered with nvmem core expect 0 to be returned
on success and a negative value to be returned on failure.
meson_efuse_read() and meson_efuse_write() call into
meson_sm_call_read() and meson_sm_call_write() respectively which return
the number of bytes read or written on success as per their api
description.
Fix to return error if meson_sm_call_read()/meson_sm_call_write()
returns an error else return 0.
Fixes: a29a63bdaf6f ("nvmem: meson-efuse: simplify read callback")
Cc: stable@vger.kernel.org
Signed-off-by: Joy Chakraborty <joychakr@google.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240628113704.13742-3-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 28b008751aa295612318a0fbb2f22dd4f6a83139 upstream.
reg_read() callback registered with nvmem core expects 0 on success and
a negative value on error but rmem_read() returns the number of bytes
read which is treated as an error at the nvmem core.
This does not break when rmem is accessed using sysfs via
bin_attr_nvmem_read()/write() but causes an error when accessed from
places like nvmem_access_with_keepouts(), etc.
Change to return 0 on success and error in case
memory_read_from_buffer() returns an error or -EIO if bytes read do not
match what was requested.
Fixes: 5a3fa75a4d9c ("nvmem: Add driver to expose reserved memory as nvmem")
Cc: stable@vger.kernel.org
Signed-off-by: Joy Chakraborty <joychakr@google.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240628113704.13742-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
