IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Enumeration P2P_PROTO_WK_ID is not used in the driver code,
so remove it from wifi.h.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix the check to improve readibility
CHECK: Alignment should match open parenthesis
Signed-off-by: Madhumitha Prabakaran <madhumithabiw@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
EROFS has an optimized path called TAIL merging, which is designed
to merge multiple reads and the corresponding decompressions into
one if these requests read continuous pages almost at the same time.
In general, it behaves as follows:
________________________________________________________________
... | TAIL . HEAD | PAGE | PAGE | TAIL . HEAD | ...
_____|_combined page A_|________|________|_combined page B_|____
1 ] -> [ 2 ] -> [ 3
If the above three reads are requested in the order 1-2-3, it will
generate a large work chain rather than 3 individual work chains
to reduce scheduling overhead and boost up sequential read.
However, if Read 2 is processed slightly earlier than Read 1,
currently it still generates 2 individual work chains (chain 1, 2)
but it does in-place decompression for combined page A, moreover,
if chain 2 decompresses ahead of chain 1, it will be a race and
lead to corrupted decompressed page. This patch fixes it.
Fixes: 3883a79abd02 ("staging: erofs: introduce VLE decompression support")
Cc: <stable@vger.kernel.org> # 4.19+
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Considering a read request with two decompressed file pages,
If a decompression work cannot be started on the previous page
due to memory pressure but in-memory LTP map lookup is done,
builder->work should be still NULL.
Moreover, if the current page also belongs to the same map,
it won't try to start the decompression work again and then
run into trouble.
This patch aims to solve the above issue only with little changes
as much as possible in order to make the fix backport easier.
kernel message is:
<4>[1051408.015930s]SLUB: Unable to allocate memory on node -1, gfp=0x2408040(GFP_NOFS|__GFP_ZERO)
<4>[1051408.015930s] cache: erofs_compress, object size: 144, buffer size: 144, default order: 0, min order: 0
<4>[1051408.015930s] node 0: slabs: 98, objs: 2744, free: 0
* Cannot allocate the decompression work
<3>[1051408.015960s]erofs: z_erofs_vle_normalaccess_readpages, readahead error at page 1008 of nid 5391488
* Note that the previous page was failed to read
<0>[1051408.015960s]Internal error: Accessing user space memory outside uaccess.h routines: 96000005 [#1] PREEMPT SMP
...
<4>[1051408.015991s]Hardware name: kirin710 (DT)
...
<4>[1051408.016021s]PC is at z_erofs_vle_work_add_page+0xa0/0x17c
<4>[1051408.016021s]LR is at z_erofs_do_read_page+0x12c/0xcf0
...
<4>[1051408.018096s][<ffffff80c6fb0fd4>] z_erofs_vle_work_add_page+0xa0/0x17c
<4>[1051408.018096s][<ffffff80c6fb3814>] z_erofs_vle_normalaccess_readpages+0x1a0/0x37c
<4>[1051408.018096s][<ffffff80c6d670b8>] read_pages+0x70/0x190
<4>[1051408.018127s][<ffffff80c6d6736c>] __do_page_cache_readahead+0x194/0x1a8
<4>[1051408.018127s][<ffffff80c6d59318>] filemap_fault+0x398/0x684
<4>[1051408.018127s][<ffffff80c6d8a9e0>] __do_fault+0x8c/0x138
<4>[1051408.018127s][<ffffff80c6d8f90c>] handle_pte_fault+0x730/0xb7c
<4>[1051408.018127s][<ffffff80c6d8fe04>] __handle_mm_fault+0xac/0xf4
<4>[1051408.018157s][<ffffff80c6d8fec8>] handle_mm_fault+0x7c/0x118
<4>[1051408.018157s][<ffffff80c8c52998>] do_page_fault+0x354/0x474
<4>[1051408.018157s][<ffffff80c8c52af8>] do_translation_fault+0x40/0x48
<4>[1051408.018157s][<ffffff80c6c002f4>] do_mem_abort+0x80/0x100
<4>[1051408.018310s]---[ end trace 9f4009a3283bd78b ]---
Fixes: 3883a79abd02 ("staging: erofs: introduce VLE decompression support")
Cc: <stable@vger.kernel.org> # 4.19+
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch resolves the following page use-after-free issue,
z_erofs_vle_unzip:
...
for (i = 0; i < nr_pages; ++i) {
...
z_erofs_onlinepage_endio(page); (1)
}
for (i = 0; i < clusterpages; ++i) {
page = compressed_pages[i];
if (page->mapping == mngda) (2)
continue;
/* recycle all individual staging pages */
(void)z_erofs_gather_if_stagingpage(page_pool, page); (3)
WRITE_ONCE(compressed_pages[i], NULL);
}
...
After (1) is executed, page is freed and could be then reused, if
compressed_pages is scanned after that, it could fall info (2) or
(3) by mistake and that could finally be in a mess.
This patch aims to solve the above issue only with little changes
as much as possible in order to make the fix backport easier.
Fixes: 3883a79abd02 ("staging: erofs: introduce VLE decompression support")
Cc: <stable@vger.kernel.org> # 4.19+
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
port_switchdev_event() does not check that the target network device is
actually backed by the ethsw driver, this could be problematic in a
stacked environment case.
Fixes: 44baaa43d7cc ("staging: fsl-dpaa2/ethsw: Add Freescale DPAA2 Ethernet Switch driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use !x instead of x == NULL. Reported by checkpatch.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add spaces around '*' to follow kernel coding style.
Reported by checkpatch.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are no definitions of odm_DIGbyRSSI_LPS(), ODM_PhyStatusQuery()
and ODM_MacStatusQuery() in the driver code. So remove the unused
declarations from the headers odm.h and odm_hwconfig.h.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove unnecessary blank line between declarations.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace tabs with spaces in declarations to cleanup whitespace.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After commit 6192269444eb ("introduce a parallel variant of ->iterate()"),
readdir can be done without taking exclusive inode lock of course.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
VFS will take inode_lock for readdir, therefore no need to
take page lock in readdir at all just as the majority of
other generic filesystems.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We often receive patches which erroneously try to use kstrtoul in these
places.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The "ni_tio" module contains code to allocate, destroy and operate on a
`struct ni_gpct_device`, which represents a number of counters spread
over one or more blocks (or "chips"). `struct ni_gpct_device` includes
an array member `regs` holding shadow copies of register values.
Unfortunately, this is currently shared by each block of counters so
they interfere with each other. This is a problem for the "ni_660x"
module, which has 8 counters spread over 2 blocks. The `regs` storage
needs to be two-dimensional, indexed by block (chip) number and register
number. (It does not need to be three-dimensional because the registers
for individual counters are intermingled within the block.)
Change the `regs` member to an array pointer that can be indexed like a
two-dimensional array to access the shadow storage for each register in
each block. Allocate the storage in `ni_gpct_device_construct()` and
free it in `ni_gpct_device_destroy()`. (`ni_gpct_device_construct()`
can determine the number of blocks from the `num_counters` and
`counters_per_chip` parameters.)
Add new member `num_chips` to hold the number of chips. Use that to
check that `chip_index` value is in range in the same places that
check the register offset is in range.
Remove the `counters_per_chip` member of `struct ni_gpct_device` as it
is not needed anywhere and could be easily derived from the
`num_counters` and `num_chips` members if required.
Thanks to GitHub user "raabej" (real name unknown) for an initial
implementation of this in the out-of-tree fork of the Comedi drivers.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ashmem_pin() is calling range_shrink() without checking whether
range_alloc() succeeded. Also, doing memory allocation with ashmem_mutex
held should be avoided because ashmem_shrink_scan() tries to hold it.
Therefore, move memory allocation for range_alloc() to ashmem_pin_unpin()
and make range_alloc() not to fail.
This patch is mostly meant for backporting purpose for fuzz testing on
stable/distributor kernels, for there is a plan to remove this code in
near future.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: stable@vger.kernel.org
Reviewed-by: Joel Fernandes <joel@joelfernandes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Clean checkpatch.pl issue in various files:
CHECK: Alignment should match open parenthesis
Adjust parameters to match alignment with open paranthesis
Signed-off-by: Bhanusree Pola <bhanusreemahesh@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove blank line to resolve checkpatch.pl issue:
CHECK: Blank lines aren't necessary before a close brace '}'
Signed-off-by: Bhanusree Pola <bhanusreemahesh@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove unnecessary blank line
issue found with checkpatch.pl:
CHECK: Please don't use multiple blank lines
Signed-off-by: Bhanusree Pola <bhanusreemahesh@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adjust parameters of "netdev_dbg" to match alignment with
open parenthesis.
Issue found using checkpatch.pl
Signed-off-by: Bhanusree Pola <bhanusreemahesh@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix the check to improve readibility.
CHECK: Alignment should match open parenthesis
Signed-off-by: Madhumitha Prabakaran <madhumithabiw@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add blank line after the structure declaration,
struct fwtty_port *port = tty->driver_data;
Issue found using checkpatch.pl
Signed-off-by: Bhanusree Pola <bhanusreemahesh@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix the checkpatch.pl warning:
WARNING:line over 80 characters
Move Parameters to the next lines with proper alignment
Signed-off-by: Bhanusree Pola <bhanusreemahesh@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove unnecesessary extra blank line before the closing brace,
to solve the checkpatch.pl check:
CHECK: Extra blank line not required before closing brace '}'
Signed-off-by: Bhanusree Pola <bhanusreemahesh@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Clear the warning found by checkpatch.pl
WARNING:Alignment should match open parenthesis
Adjust paremeters in fbtft_par_dbg and write_reg.
Signed-off-by: Bhanusree Pola <bhanusreemahesh@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adds the SPDX GPL-2.0 or BSD-2-clause license identifier,
which solves the checkpatch.pl warnings: "WARNING: Missing
or malformed SPDX-License-Identifier tag in line 1".
Signed-off-by: Bhagyashri Dighole <digholebhagyashri@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adjust "dev_dbg" parameters to match alignment with open parenthesis
Issue found with checkpatch.pl
Signed-off-by: Bhanusree Pola <bhanusreemahesh@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace 'unsigned' with 'unsigned int' to be specific with data type.
Issue found with checkpatch.pl
Signed-off-by: Bhanusree Pola <bhanusreemahesh@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Clang warns:
drivers/staging/rtlwifi/halmac/halmac_88xx/halmac_func_88xx.c:2472:11:
warning: implicit conversion from enumeration type 'enum
halmac_cmd_process_status' to different enumeration type 'enum
halmac_ret_status' [-Wenum-conversion]
return HALMAC_CMD_PROCESS_ERROR;
~~~~~~ ^~~~~~~~~~~~~~~~~~~~~~~~
1 warning generated.
Fix this by using the proper enum for allocation failures,
HALMAC_RET_MALLOC_FAIL, which is used in the rest of this file.
Fixes: e4b08e16b7d9 ("staging: r8822be: check kzalloc return or bail")
Link: https://github.com/ClangBuiltLinux/linux/issues/375
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- adds the SPDX GPL-2.0 license identifier which solves the checkpatch.pl warning
- Removed license boilerplate text
- Issue found with checkpatch.pl warning:
"WARNING: Missing or malformed SPDX-License-Identifier tag in line 1"
Signed-off-by: Bhanusree Pola <bhanusreemahesh@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
page_private(page) cannot be changed if page lock is taken.
Besides, the corresponding workgroup won't be freed
if the page is already protected by page lock, therefore
no need to take rcu read lock.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In real scenario, there could be several threads accessing xattrs
of the same xattr-uninitialized inode, and init_inode_xattrs()
almost at the same time.
That's actually an unexpected behavior, this patch closes the race.
Fixes: b17500a0fdba ("staging: erofs: introduce xattr & acl support")
Cc: <stable@vger.kernel.org> # 4.19+
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace an open-coded version of skb_put_zero() with a call to the helper.
This is a cleanup and is also useful for potentially adding KASAN
integration to SKBs in the future.
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Align code with open parantheses to improve the readability.
Issue found using checkpatch.pl
Signed-off-by: Bhanusree Pola <bhanusreemahesh@gmail.com>
Reviewed-by: Gao Xiang <gaoxiang25@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use BIT(x) instead of (1<<x), reported by checkpatch.pl.
Signed-off-by: Bhanusree Pola <bhanusreemahesh@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/staging/rtlwifi/efuse.c: In function 'efuse_pg_packet_write':
drivers/staging/rtlwifi/efuse.c:922:24: warning:
variable 'dataempty' set but not used [-Wunused-but-set-variable]
drivers/staging/rtlwifi/efuse.c: In function 'efuse_get_current_size':
drivers/staging/rtlwifi/efuse.c:1185:5: warning:
variable 'hoffset' set but not used [-Wunused-but-set-variable]
They're never used and can be removed.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove including <linux/version.h> that don't need it.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In preparation to enabling -Wimplicit-fallthrough, mark switch
cases where we are expecting to fall through.
This patch fixes the following warnings:
drivers/staging/vt6656/key.c: In function ‘vnt_set_keymode’:
drivers/staging/vt6656/key.c:70:19: warning: this statement may fall through [-Wimplicit-fallthrough=]
key->hw_key_idx = entry;
~~~~~~~~~~~~~~~~^~~~~~~
drivers/staging/vt6656/key.c:71:2: note: here
case VNT_KEY_ALLGROUP:
^~~~
drivers/staging/vt6656/key.c:73:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (onfly_latch)
^
drivers/staging/vt6656/key.c:75:2: note: here
case VNT_KEY_GROUP_ADDRESS:
^~~~
drivers/staging/vt6656/key.c:76:12: warning: this statement may fall through [-Wimplicit-fallthrough=]
key_mode |= mode;
~~~~~~~~~^~~~~~~
drivers/staging/vt6656/key.c:77:2: note: here
case VNT_KEY_GROUP:
^~~~
Warning level 3 was used: -Wimplicit-fallthrough=3
This patch is part of the ongoing efforts to enable
-Wimplicit-fallthrough.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/staging/rtl8192e/rtl8192e/rtl_core.c: In function '_rtl92e_tx':
drivers/staging/rtl8192e/rtl8192e/rtl_core.c:1732:28: warning:
variable 'broad_addr' set but not used [-Wunused-but-set-variable]
drivers/staging/rtl8192e/rtl8192e/rtl_core.c:1731:24: warning:
variable 'stype' set but not used [-Wunused-but-set-variable]
This remove unnessesary bool variable 'multi_addr, broad_addr, uni_addr'
Also 'stype' never used and can be removed.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Each enabled port is being checked in 'mt7621_pcie_enable_ports"
function calling 'mt7621_pcie_enable_port'. The return value for
this function on success is zero, so the check is reversed. Fix it.
Fixes: 802a2f7b2fe3: staging: mt7621-pci: factor out 'mt7621_pcie_enable_port' function
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is no need to write IO and memory space window Host PCI bridge
registers before doing anything else. Just use its default values which
should be ok.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To properly follow kernel style replace spaces with tabs in comment
where link status bits are explained.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
