IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Doing sync_meta_pages with META_FLUSH when checkpoint, we overide rw
using WRITE_FLUSH_FUA. At this time, we also should set
REQ_META|REQ_PRIO.
Signed-off-by: Changman Lee <cm224.lee@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch should resolve the following bug.
=========================================================
[ INFO: possible irq lock inversion dependency detected ]
3.13.0-rc5.f2fs+ #6 Not tainted
---------------------------------------------------------
kswapd0/41 just changed the state of lock:
(&sbi->gc_mutex){+.+.-.}, at: [<ffffffffa030503e>] f2fs_balance_fs+0xae/0xd0 [f2fs]
but this lock took another, RECLAIM_FS-READ-unsafe lock in the past:
(&sbi->cp_rwsem){++++.?}
and interrupts could create inverse lock ordering between them.
other info that might help us debug this:
Chain exists of:
&sbi->gc_mutex --> &sbi->cp_mutex --> &sbi->cp_rwsem
Possible interrupt unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&sbi->cp_rwsem);
local_irq_disable();
lock(&sbi->gc_mutex);
lock(&sbi->cp_mutex);
<Interrupt>
lock(&sbi->gc_mutex);
*** DEADLOCK ***
This bug is due to the f2fs_balance_fs call in f2fs_write_data_page.
If f2fs_write_data_page is triggered by wbc->for_reclaim via kswapd, it should
not call f2fs_balance_fs which tries to get a mutex grabbed by original syscall
flow.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Support for f2fs-tools/tools/f2stat to monitor
/sys/kernel/debug/f2fs/status
Signed-off-by: Changman Lee <cm224.lee@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
With the 2 previous changes, all the long time operations are moved out
of the protection region, so here we can use spinlock rather than mutex
(orphan_inode_mutex) for lower overhead.
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Move alloc new orphan node out of lock protection region.
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
"boo sync" parameter is never referenced in f2fs_wait_on_page_writeback.
We should remove this parameter.
Signed-off-by: Yuan Zhong <yuan.mark.zhong@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch adds missing some description of sysfs entries in
- Documentation/ABI/testing/sysfs-fs-f2fs
- Documentation/filesystems/f2fs.txt.
And it adds a maintained document entry of F2FS in MAINTAINERS.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Previously during SSR and GC, the maximum number of retrials to find a victim
segment was hard-coded by MAX_VICTIM_SEARCH, 4096 by default.
This number makes an effect on IO locality, when SSR mode is activated, which
results in performance fluctuation on some low-end devices.
If max_victim_search = 4, the victim will be searched like below.
("D" represents a dirty segment, and "*" indicates a selected victim segment.)
D1 D2 D3 D4 D5 D6 D7 D8 D9
[ * ]
[ * ]
[ * ]
[ ....]
This patch adds a sysfs entry to control the number dynamically through:
/sys/fs/f2fs/$dev/max_victim_search
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
When considering a bunch of data writes with very frequent fsync calls, we
are able to think the following performance regression.
N: Node IO, D: Data IO, IO scheduler: cfq
Issue pending IOs
D1 D2 D3 D4
D1 D2 D3 D4 N1
D2 D3 D4 N1 N2
N1 D3 D4 N2 D1
--> N1 can be selected by cfq becase of the same priority of N and D.
Then D3 and D4 would be delayed, resuling in performance degradation.
So, when processing the fsync call, it'd better give higher priority to data IOs
than node IOs by assigning WRITE and WRITE_SYNC respectively.
This patch improves the random wirte performance with frequent fsync calls by up
to 10%.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Here is a case which could read inline page data not from first page.
1. write inline data
2. lseek to offset 4096
3. read 4096 bytes from offset 4096
(read_inline_data read inline data page to non-first page,
And previously VFS has add this page to page cache)
4. ftruncate offset 8192
5. read 4096 bytes from offset 4096
(we meet this updated page with inline data in cache)
So we should leave this page with inited data and uptodate flag
for this case.
Change log from v1:
o fix a deadlock bug
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Change log from v1:
o reduce unneeded memset in __f2fs_convert_inline_data
>From 58796be2bd2becbe8d52305210fb2a64e7dd80b6 Mon Sep 17 00:00:00 2001
From: Chao Yu <chao2.yu@samsung.com>
Date: Mon, 30 Dec 2013 09:21:33 +0800
Subject: [PATCH] f2fs: avoid to left uninitialized data in page when read
inline data
We left uninitialized data in the tail of page when we read an inline data
page. So let's initialize left part of the page excluding inline data region.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
The truncate_partial_nodes puts pages incorrectly in the following two cases.
Note that the value for argc 'depth' can only be 2 or 3.
Please see truncate_inode_blocks() and truncate_partial_nodes().
1) An err is occurred in the first 'for' loop
When err is occurred with depth = 2, pages[0] is invalid, so this page doesn't
need to be put. There is no problem, however, when depth is 3, it doesn't put
the pages correctly where pages[0] is valid and pages[1] is invalid.
In this case, depth is set to 2 (ref to statemnt depth = i + 1), and then
'goto fail'.
In label 'fail', for (i = depth - 3; i >= 0; i--) cannot meet the condition
because i = -1, so pages[0] cann't be put.
2) An err happened in the second 'for' loop
Now we've got pages[0] with depth = 2, or we've got pages[0] and pages[1]
with depth = 3. When an err is detected, we need 'goto fail' to put such
the pages.
When depth is 2, in label 'fail', for (i = depth - 3; i >= 0; i--) cann't
meet the condition because i = -1, so pages[0] cann't be put.
When depth is 3, in label 'fail', for (i = depth - 3; i >= 0; i--) can
only put pages[0], pages[1] also cann't be put.
Note that 'depth' has been changed before first 'goto fail' (ref to statemnt
depth = i + 1), so passing this modified 'depth' to the tracepoint,
trace_f2fs_truncate_partial_nodes, is also incorrect.
Signed-off-by: Shifei Ge <shifei10.ge@samsung.com>
[Jaegeuk Kim: modify the description and fix one bug]
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
The get_dnode_of_data nullifies inode and node page when error is occurred.
There are two cases that passes inode page into get_dnode_of_data().
1. make_empty_dir()
-> get_new_data_page()
-> f2fs_reserve_block(ipage)
-> get_dnode_of_data()
2. f2fs_convert_inline_data()
-> __f2fs_convert_inline_data()
-> f2fs_reserve_block(ipage)
-> get_dnode_of_data()
This patch adds correct error handling codes when get_dnode_of_data() returns
an error.
At first, f2fs_reserve_block() calls f2fs_put_dnode() whenever reserve_new_block
returns an error.
So, the rule of f2fs_reserve_block() is to nullify inode page when there is any
error internally.
Finally, two callers of f2fs_reserve_block() should call f2fs_put_dnode()
appropriately if they got an error since successful f2fs_reserve_block().
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch adds a inline_data recovery routine with the following policy.
[prev.] [next] of inline_data flag
o o -> recover inline_data
o x -> remove inline_data, and then recover data blocks
x o -> remove inline_data, and then recover inline_data
x x -> recover data blocks
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch adds the number of inline_data files into the status information.
Note that the number is reset whenever the filesystem is newly mounted.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Change log from v1:
o handle NULL pointer of grab_cache_page_write_begin() pointed by Chao Yu.
This patch refactors f2fs_convert_inline_data to check a couple of conditions
internally for deciding whether it needs to convert inline_data or not.
So, the new f2fs_convert_inline_data initially checks:
1) f2fs_has_inline_data(), and
2) the data size to be changed.
If the inode has inline_data but the size to fill is less than MAX_INLINE_DATA,
then we don't need to convert the inline_data with data allocation.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
In f2fs_write_begin(), if f2fs_conver_inline_data() returns an error like
-ENOSPC, f2fs should call f2fs_put_page().
Otherwise, it is remained as a locked page, resulting in the following bug.
[<ffffffff8114657e>] sleep_on_page+0xe/0x20
[<ffffffff81146567>] __lock_page+0x67/0x70
[<ffffffff81157d08>] truncate_inode_pages_range+0x368/0x5d0
[<ffffffff81157ff5>] truncate_inode_pages+0x15/0x20
[<ffffffff8115804b>] truncate_pagecache+0x4b/0x70
[<ffffffff81158082>] truncate_setsize+0x12/0x20
[<ffffffffa02a1842>] f2fs_setattr+0x72/0x270 [f2fs]
[<ffffffff811cdae3>] notify_change+0x213/0x400
[<ffffffff811ab376>] do_truncate+0x66/0xa0
[<ffffffff811ab541>] vfs_truncate+0x191/0x1b0
[<ffffffff811ab5bc>] do_sys_truncate+0x5c/0xa0
[<ffffffff811ab78e>] SyS_truncate+0xe/0x10
[<ffffffff81756052>] system_call_fastpath+0x16/0x1b
[<ffffffffffffffff>] 0xffffffffffffffff
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
In the punch_hole(), let's convert inline_data all the time for simplicity and
to avoid potential deadlock conditions.
It is pretty much not a big deal to do this.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch locates checking the inline_data prior to calling f2fs_lock_op()
in truncate_blocks(), since getting the lock is unnecessary.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch describes the inline_data support in f2fs document.
Signed-off-by: Huajun Li <huajun.li@intel.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Hook inline data read/write, truncate, fallocate, setattr, etc.
Files need meet following 2 requirement to inline:
1) file size is not greater than MAX_INLINE_DATA;
2) file doesn't pre-allocate data blocks by fallocate().
FI_INLINE_DATA will not be set while creating a new regular inode because
most of the files are bigger than ~3.4K. Set FI_INLINE_DATA only when
data is submitted to block layer, ranther than set it while creating a new
inode, this also avoids converting data from inline to normal data block
and vice versa.
While writting inline data to inode block, the first data block should be
released if the file has a block indexed by i_addr[0].
On the other hand, when a file operation is appied to a file with inline
data, we need to test if this file can remain inline by doing this
operation, otherwise it should be convert into normal file by reserving
a new data block, copying inline data to this new block and clear
FI_INLINE_DATA flag. Because reserve a new data block here will make use
of i_addr[0], if we save inline data in i_addr[0..872], then the first
4 bytes would be overwriten. This problem can be avoided simply by
not using i_addr[0] for inline data.
Signed-off-by: Huajun Li <huajun.li@intel.com>
Signed-off-by: Haicheng Li <haicheng.li@linux.intel.com>
Signed-off-by: Weihong Xu <weihong.xu@intel.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Functions to implement inline data read/write, and move inline data to
normal data block when file size exceeds inline data limitation.
Signed-off-by: Huajun Li <huajun.li@intel.com>
Signed-off-by: Haicheng Li <haicheng.li@linux.intel.com>
Signed-off-by: Weihong Xu <weihong.xu@intel.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Previously, we need to calculate the max orphan num when we try to acquire an
orphan inode, but it's a stable value since the super block was inited. So
converting it to a field of f2fs_sb_info and use it directly when needed seems
a better choose.
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
The f2fs supports 4KB block size. If user requests dwrite with under 4KB data,
it allocates a new 4KB data block.
However, f2fs doesn't add zero data into the untouched data area inside the
newly allocated data block.
This incurs an error during the xfstest #263 test as follow.
263 12s ... [failed, exit status 1] - output mismatch (see 263.out.bad)
--- 263.out 2013-03-09 03:37:15.043967603 +0900
+++ 263.out.bad 2013-12-27 04:20:39.230203114 +0900
@@ -1,3 +1,976 @@
QA output created by 263
fsx -N 10000 -o 8192 -l 500000 -r PSIZE -t BSIZE -w BSIZE -Z
-fsx -N 10000 -o 128000 -l 500000 -r PSIZE -t BSIZE -w BSIZE -Z
+fsx -N 10000 -o 8192 -l 500000 -r PSIZE -t BSIZE -w BSIZE -Z
+truncating to largest ever: 0x12a00
+truncating to largest ever: 0x75400
+fallocating to largest ever: 0x79cbf
...
(Run 'diff -u 263.out 263.out.bad' to see the entire diff)
Ran: 263
Failures: 263
Failed 1 of 1 tests
It turns out that, when the test tries to write 2KB data with dio, the new dio
path allocates 4KB data block without filling zero data inside the remained 2KB
area. Finally, the output file contains a garbage data for that region.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
When get_dnode_of_data() in get_data_block() returns a successful dnode, we
should put the dnode.
But, previously, if its data block address is equal to NEW_ADDR, we didn't do
that, resulting in a deadlock condition.
So, this patch splits original error conditions with this case, and then calls
f2fs_put_dnode before finishing the function.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch introduces F2FS_INODE that returns struct f2fs_inode * from the inode
page.
By using this macro, we can remove unnecessary casting codes like below.
struct f2fs_inode *ri = &F2FS_NODE(inode_page)->i;
-> struct f2fs_inode *ri = F2FS_INODE(inode_page);
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
In current flow, we will get Null return value of f2fs_find_entry in
recover_dentry when name.len is bigger than F2FS_NAME_LEN, and then we
still add this inode into its dir entry.
To avoid this situation, we must check filename length before we use it.
Another point is that we could remove the code of checking filename length
In f2fs_find_entry, because f2fs_lookup will be called previously to ensure of
validity of filename length.
V2:
o add WARN_ON() as Jaegeuk Kim suggested.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
When we rename a dir to new name which is not exist previous,
we will set pino of parent inode with ino of child inode in f2fs_set_link.
It destroy consistency of pino, it should be fixed.
Thanks for previous work of Shu Tan.
Signed-off-by: Shu Tan <shu.tan@samsung.com>
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Update several comments:
1. use f2fs_{un}lock_op install of mutex_{un}lock_op.
2. update comment of get_data_block().
3. update description of node offset.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
When using the f2fs_io_info in the low level, we still need to merge the
rw and rw_flag, so use the rw to hold all the io flags directly,
and remove the rw_flag field.
ps.It is based on the previous patch:
f2fs: move all the bio initialization into __bio_alloc
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Move all the bio initialization into __bio_alloc, and some minor cleanups are
also added.
v3:
Use 'bool' rather than 'int' as Kim suggested.
v2:
Use 'is_read' rather than 'rw' as Yu Chao suggested.
Remove the needless initialization of bio->bi_private.
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch enhances writing dirty meta pages collectively in background.
During the file data writes, it'd better avoid to write small dirty meta pages
frequently.
So let's give a chance to collect a number of dirty meta pages for a while.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Previously, f2fs doesn't support direct IOs with high performance, which throws
every write requests via the buffered write path, resulting in highly
performance degradation due to memory opeations like copy_from_user.
This patch introduces a new direct IO path in which every write requests are
processed by generic blockdev_direct_IO() with enhanced get_block function.
The get_data_block() in f2fs handles:
1. if original data blocks are allocates, then give them to blockdev.
2. otherwise,
a. preallocate requested block addresses
b. do not use extent cache for better performance
c. give the block addresses to blockdev
This policy induces that:
- new allocated data are sequentially written to the disk
- updated data are randomly written to the disk.
- f2fs gives consistency on its file meta, not file data.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch introduces new sysfs entries for users to control the policy of
in-place-updates, namely IPU, in f2fs.
Sometimes f2fs suffers from performance degradation due to its out-of-place
update policy that produces many additional node block writes.
If the storage performance is very dependant on the amount of data writes
instead of IO patterns, we'd better drop this out-of-place update policy.
This patch suggests 5 polcies and their triggering conditions as follows.
[sysfs entry name = ipu_policy]
0: F2FS_IPU_FORCE all the time,
1: F2FS_IPU_SSR if SSR mode is activated,
2: F2FS_IPU_UTIL if FS utilization is over threashold,
3: F2FS_IPU_SSR_UTIL if SSR mode is activated and FS utilization is over
threashold,
4: F2FS_IPU_DISABLE disable IPU. (=default option)
[sysfs entry name = min_ipu_util]
This parameter controls the threshold to trigger in-place-updates.
The number indicates percentage of the filesystem utilization, and used by
F2FS_IPU_UTIL and F2FS_IPU_SSR_UTIL policies.
For more details, see need_inplace_update() in segment.h.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch introduces f2fs_io_info to mitigate the complex parameter list.
struct f2fs_io_info {
enum page_type type; /* contains DATA/NODE/META/META_FLUSH */
int rw; /* contains R/RS/W/WS */
int rw_flag; /* contains REQ_META/REQ_PRIO */
}
1. f2fs_write_data_pages
- DATA
- WRITE_SYNC is set when wbc->WB_SYNC_ALL.
2. sync_node_pages
- NODE
- WRITE_SYNC all the time
3. sync_meta_pages
- META
- WRITE_SYNC all the time
- REQ_META | REQ_PRIO all the time
** f2fs_submit_merged_bio() handles META_FLUSH.
4. ra_nat_pages, ra_sit_pages, ra_sum_pages
- META
- READ_SYNC
Cc: Fan Li <fanofcode.li@samsung.com>
Cc: Changman Lee <cm224.lee@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Previously f2fs submits most of write requests using WRITE_SYNC, but f2fs_write_data_pages
submits last write requests by sync_mode flags callers pass.
This causes a performance problem since continuous pages with different sync flags
can't be merged in cfq IO scheduler(thanks yu chao for pointing it out), and synchronous
requests often take more time.
This patch makes the following modifies to DATA writebacks:
1. every page will be written back using the sync mode caller pass.
2. only pages with the same sync mode can be merged in one bio request.
These changes are restricted to DATA pages.Other types of writebacks are modified
To remain synchronous.
In my test with tiotest, f2fs sequence write performance is improved by about 7%-10% ,
and this patch has no obvious impact on other performance tests.
Signed-off-by: Fan Li <fanofcode.li@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch adds unlikely() macro into the most of codes.
The basic rule is to add that when:
- checking unusual errors,
- checking page mappings,
- and the other unlikely conditions.
Change log from v1:
- Don't add unlikely for the NULL test and error test: advised by Andi Kleen.
Cc: Chao Yu <chao2.yu@samsung.com>
Cc: Andi Kleen <andi@firstfloor.org>
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
As we know, some of our branch condition will rarely be true. So we could add
'unlikely' to let compiler optimize these code, by this way we could drop
unneeded 'jump' assemble code to improve performance.
change log:
o add *unlikely* as many as possible across the whole source files at once
suggested by Jaegeuk Kim.
Suggested-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
In find_fsync_dnodes() and recover_data(), our flow is like this:
->f2fs_submit_page_bio()
-> f2fs_put_page()
-> page_cache_release() ---- page->_count declined to zero.
->__free_pages()
-> put_page_testzero() ---- page->_count will be declined again.
We will get a segment fault in put_page_testzero when CONFIG_DEBUG_VM
is on, or return MM with a bad page with wrong _count num.
So let's just release this page.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Use inner macro GFP_F2FS_ZERO to instead of GFP_NOFS | __GFP_ZERO for
simplification of code.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This minor change for the naming conventions of debugfs_root
to avoid any possible conflicts to the other filesystem.
Signed-off-by: Younger Liu <younger.liucn@gmail.com>
Cc: Younger Liu <younger.liucn@gmail.com>
Cc: Jaegeuk Kim <jaegeuk.kim@samsung.com>
[Jaegeuk Kim: change the patch name]
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
When debugfs_create_file() failed in f2fs_create_root_stats(),
debugfs_root should be remove.
Signed-off-by: Younger Liu <liuyiyang@hisense.com>
Cc: Younger Liu <younger.liucn@gmail.com>
Cc: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
If cp has no CP_UMOUNT_FLAG, we will read all pages in whole node segment
one by one, it makes low performance. So let's merge contiguous pages and
readahead for better performance.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
[Jaegeuk Kim: adjust the new bio operations]
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch integrates redundant bio operations on read and write IOs.
1. Move bio-related codes to the top of data.c.
2. Replace f2fs_submit_bio with f2fs_submit_merged_bio, which handles read
bios additionally.
3. Introduce __submit_merged_bio to submit the merged bio.
4. Change f2fs_readpage to f2fs_submit_page_bio.
5. Introduce f2fs_submit_page_mbio to integrate previous submit_read_page and
submit_write_page.
Reviewed-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Reviewed-by: Chao Yu <chao2.yu@samsung.com >
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Previously f2fs allocates its own bi_private data structure all the time even
though we don't use it. But, can we remove this bi_private allocation?
This patch removes such the additional bi_private allocation.
1. Retrieve f2fs_sb_info from its page->mapping->host->i_sb.
- This removes the usecases of bi_private in end_io.
2. Use bi_private only when we really need it.
- The bi_private is used only when the checkpoint procedure is conducted.
- When conducting the checkpoint, f2fs submits a META_FLUSH bio to wait its bio
completion.
- Since we have no dependancies to remove bi_private now, let's just use
bi_private pointer as the completion pointer.
Reviewed-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
The recover_orphan_inodes() returns no error all the time, so we don't need to
check its errors.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
[Jaegeuk Kim: add description]
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
