IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
* for-next/mte:
arm64: kasan: Revert "arm64: mte: reset the page tag in page->flags"
mm: kasan: Skip page unpoisoning only if __GFP_SKIP_KASAN_UNPOISON
mm: kasan: Skip unpoisoning of user pages
mm: kasan: Ensure the tags are visible before the tag in page->flags
* for-next/misc:
arm64/mm: use GENMASK_ULL for TTBR_BADDR_MASK_52
arm64: numa: Don't check node against MAX_NUMNODES
arm64: mm: Remove assembly DMA cache maintenance wrappers
arm64/mm: Define defer_reserve_crashkernel()
arm64: fix oops in concurrently setting insn_emulation sysctls
arm64: Do not forget syscall when starting a new thread.
arm64: boot: add zstd support
* for-next/kpti:
arm64: correct the effect of mitigations off on kpti
arm64: entry: simplify trampoline data page
arm64: mm: install KPTI nG mappings with MMU enabled
arm64: kpti-ng: simplify page table traversal logic
* for-next/extable:
arm64: extable: cleanup redundant extable type EX_TYPE_FIXUP
arm64: extable: move _cond_extable to _cond_uaccess_extable
arm64: extable: make uaaccess helper use extable type EX_TYPE_UACCESS_ERR_ZERO
arm64: asm-extable: add asm uacess helpers
arm64: asm-extable: move data fields
arm64: extable: add new extable type EX_TYPE_KACCESS_ERR_ZERO support
THP_SWAP has been proven to improve the swap throughput significantly
on x86_64 according to commit bd4c82c22c367e ("mm, THP, swap: delay
splitting THP after swapped out").
As long as arm64 uses 4K page size, it is quite similar with x86_64
by having 2MB PMD THP. THP_SWAP is architecture-independent, thus,
enabling it on arm64 will benefit arm64 as well.
A corner case is that MTE has an assumption that only base pages
can be swapped. We won't enable THP_SWAP for ARM64 hardware with
MTE support until MTE is reworked to coexist with THP_SWAP.
A micro-benchmark is written to measure thp swapout throughput as
below,
unsigned long long tv_to_ms(struct timeval tv)
{
return tv.tv_sec * 1000 + tv.tv_usec / 1000;
}
main()
{
struct timeval tv_b, tv_e;;
#define SIZE 400*1024*1024
volatile void *p = mmap(NULL, SIZE, PROT_READ | PROT_WRITE,
MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
if (!p) {
perror("fail to get memory");
exit(-1);
}
madvise(p, SIZE, MADV_HUGEPAGE);
memset(p, 0x11, SIZE); /* write to get mem */
gettimeofday(&tv_b, NULL);
madvise(p, SIZE, MADV_PAGEOUT);
gettimeofday(&tv_e, NULL);
printf("swp out bandwidth: %ld bytes/ms\n",
SIZE/(tv_to_ms(tv_e) - tv_to_ms(tv_b)));
}
Testing is done on rk3568 64bit Quad Core Cortex-A55 platform -
ROCK 3A.
thp swp throughput w/o patch: 2734bytes/ms (mean of 10 tests)
thp swp throughput w/ patch: 3331bytes/ms (mean of 10 tests)
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Steven Price <steven.price@arm.com>
Cc: Yang Shi <shy828301@gmail.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Link: https://lore.kernel.org/r/20220720093737.133375-1-21cnbao@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
The comment says this should be GENMASK_ULL(47, 12), so do that!
GENMASK_ULL() is available in assembly since:
95b980d62d52 ("linux/bits.h: make BIT(), GENMASK(), and friends available in assembly")
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Link: https://lore.kernel.org/all/20171221164851.edxq536yobjuagwe@armageddon.cambridge.arm.com/
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Kristina Martsenko <kristina.martsenko@arm.com>
Reviewed-by: Kristina Martsenko <kristina.martsenko@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220708140056.10123-1-joey.gouly@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Cortex-A57 and Cortex-A72 have an erratum where an interrupt that
occurs between a pair of AES instructions in aarch32 mode may corrupt
the ELR. The task will subsequently produce the wrong AES result.
The AES instructions are part of the cryptographic extensions, which are
optional. User-space software will detect the support for these
instructions from the hwcaps. If the platform doesn't support these
instructions a software implementation should be used.
Remove the hwcap bits on affected parts to indicate user-space should
not use the AES instructions.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/r/20220714161523.279570-3-james.morse@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
When the NUMA nodes are sorted by checking ACPI SRAT (GICC AFFINITY)
sub-table, it's impossible for acpi_map_pxm_to_node() to return
any value, which is greater than or equal to MAX_NUMNODES. Lets drop
the unnecessary check in acpi_numa_gicc_affinity_init().
No functional change intended.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Link: https://lore.kernel.org/r/20220718064232.3464373-1-gshan@redhat.com
Signed-off-by: Will Deacon <will@kernel.org>
This reverts commit e5b8d9218951e59df986f627ec93569a0d22149b.
Pages mapped in user-space with PROT_MTE have the allocation tags either
zeroed or copied/restored to some user values. In order for the kernel
to access such pages via page_address(), resetting the tag in
page->flags was necessary. This tag resetting was deferred to
set_pte_at() -> mte_sync_page_tags() but it can race with another CPU
reading the flags (via page_to_virt()):
P0 (mte_sync_page_tags): P1 (memcpy from virt_to_page):
Rflags!=0xff
Wflags=0xff
DMB (doesn't help)
Wtags=0
Rtags=0 // fault
Since now the post_alloc_hook() function resets the page->flags tag when
unpoisoning is skipped for user pages (including the __GFP_ZEROTAGS
case), revert the arm64 commit calling page_kasan_tag_reset().
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Peter Collingbourne <pcc@google.com>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Acked-by: Andrey Konovalov <andreyknvl@gmail.com>
Link: https://lore.kernel.org/r/20220610152141.2148929-5-catalin.marinas@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Currently post_alloc_hook() skips the kasan unpoisoning if the tags will
be zeroed (__GFP_ZEROTAGS) or __GFP_SKIP_KASAN_UNPOISON is passed. Since
__GFP_ZEROTAGS is now accompanied by __GFP_SKIP_KASAN_UNPOISON, remove
the extra check.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Link: https://lore.kernel.org/r/20220610152141.2148929-4-catalin.marinas@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Commit c275c5c6d50a ("kasan: disable freed user page poisoning with HW
tags") added __GFP_SKIP_KASAN_POISON to GFP_HIGHUSER_MOVABLE. A similar
argument can be made about unpoisoning, so also add
__GFP_SKIP_KASAN_UNPOISON to user pages. To ensure the user page is
still accessible via page_address() without a kasan fault, reset the
page->flags tag.
With the above changes, there is no need for the arm64
tag_clear_highpage() to reset the page->flags tag.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Link: https://lore.kernel.org/r/20220610152141.2148929-3-catalin.marinas@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
__kasan_unpoison_pages() colours the memory with a random tag and stores
it in page->flags in order to re-create the tagged pointer via
page_to_virt() later. When the tag from the page->flags is read, ensure
that the in-memory tags are already visible by re-ordering the
page_kasan_tag_set() after kasan_unpoison(). The former already has
barriers in place through try_cmpxchg(). On the reader side, the order
is ensured by the address dependency between page->flags and the memory
access.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Link: https://lore.kernel.org/r/20220610152141.2148929-2-catalin.marinas@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Cortex-A510 is affected by an erratum where in rare circumstances the
CPUs may not handle a race between a break-before-make sequence on one
CPU, and another CPU accessing the same page. This could allow a store
to a page that has been unmapped.
Work around this by adding the affected CPUs to the list that needs
TLB sequences to be done twice.
Signed-off-by: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/r/20220704155732.21216-1-james.morse@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Crash kernel memory reservation gets deferred, when either CONFIG_ZONE_DMA
or CONFIG_ZONE_DMA32 config is enabled on the platform. This deferral also
impacts overall linear mapping creation including the crash kernel itself.
Just encapsulate this deferral check in a new helper for better clarity.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20220705062556.1845734-1-anshuman.khandual@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
emulation_proc_handler() changes table->data for proc_dointvec_minmax
and can generate the following Oops if called concurrently with itself:
| Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010
| Internal error: Oops: 96000006 [#1] SMP
| Call trace:
| update_insn_emulation_mode+0xc0/0x148
| emulation_proc_handler+0x64/0xb8
| proc_sys_call_handler+0x9c/0xf8
| proc_sys_write+0x18/0x20
| __vfs_write+0x20/0x48
| vfs_write+0xe4/0x1d0
| ksys_write+0x70/0xf8
| __arm64_sys_write+0x20/0x28
| el0_svc_common.constprop.0+0x7c/0x1c0
| el0_svc_handler+0x2c/0xa0
| el0_svc+0x8/0x200
To fix this issue, keep the table->data as &insn->current_mode and
use container_of() to retrieve the insn pointer. Another mutex is
used to protect against the current_mode update but not for retrieving
insn_emulation as table->data is no longer changing.
Co-developed-by: hewenliang <hewenliang4@huawei.com>
Signed-off-by: hewenliang <hewenliang4@huawei.com>
Signed-off-by: Haibin Zhang <haibinzhang@tencent.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220128090324.2727688-1-hewenliang4@huawei.com
Link: https://lore.kernel.org/r/9A004C03-250B-46C5-BF39-782D7551B00E@tencent.com
Signed-off-by: Will Deacon <will@kernel.org>
Enable tracing of the execve*() system calls with the
syscalls:sys_exit_execve tracepoint by removing the call to
forget_syscall() when starting a new thread and preserving the value of
regs->syscallno across exec.
Signed-off-by: Francis Laniel <flaniel@linux.microsoft.com>
Link: https://lore.kernel.org/r/20220608162447.666494-2-flaniel@linux.microsoft.com
Signed-off-by: Will Deacon <will@kernel.org>
Currently, extable type EX_TYPE_FIXUP is no place to use, We can safely
remove it.
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Tong Tiangen <tongtiangen@huawei.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20220621072638.1273594-7-tongtiangen@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Currently, We use _cond_extable for cache maintenance uaccess helper
caches_clean_inval_user_pou(), so this should be moved over to
EX_TYPE_UACCESS_ERR_ZERO and rename _cond_extable to _cond_uaccess_extable
for clarity.
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Tong Tiangen <tongtiangen@huawei.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20220621072638.1273594-6-tongtiangen@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Currnetly, the extable type used by __arch_copy_from/to_user() is
EX_TYPE_FIXUP. In fact, It is more clearly to use meaningful
EX_TYPE_UACCESS_*.
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Tong Tiangen <tongtiangen@huawei.com>
Link: https://lore.kernel.org/r/20220621072638.1273594-5-tongtiangen@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
In subsequent patches we want to explciitly annotate uaccess fixups in
assembly files.
We have existing helpers for this for inline assembly, but due to
differing stringification requirements it's not possible to have a
single definition that we can use for both inline asm and plain asm
files. So as with other cases (e.g. gpr-regnum.h), we must prove
separate helprs for plain asm and inline asm.
So that we can do so, this patch adds helpers to define
EX_TYPE_UACCESS_ERR_ZERO fixups in plain assembly. These correspond 1-1
with the inline assembly versions except for the absence of
stringification. No plain assmebly heleprs are added for
EX_TYPE_LOAD_UNALIGNED_ZEROPAD fixups as these only exist for a single C
function.
For copy_{to,from}_user() we'll need fixups with regs and err, so I've
added _ASM_EXTABLE_UACCESS(insn, fixup), where both the error and zero
registers are WZR.
For clarity, the existing `_asm_extable` assemgbly maco is now defined
in terms of the _ASM_EXTABLE() CPP macro, making the CPP macros
canonical in all cases.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Tong Tiangen <tongtiangen@huawei.com>
Link: https://lore.kernel.org/r/20220621072638.1273594-4-tongtiangen@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
In subsequent patches we'll need to fill in extable data fields in
regular assembly files. In preparation for this, move the definitions of
the extable data fields earlier in asm-extable.h so that they are
defined for both assembly and C files.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Tong Tiangen <tongtiangen@huawei.com>
Link: https://lore.kernel.org/r/20220621072638.1273594-3-tongtiangen@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Currently, The extable type EX_TYPE_UACCESS_ERR_ZERO is used by
__get/put_kernel_nofault(), but those helpers are not uaccess type, so we
add a new extable type EX_TYPE_KACCESS_ERR_ZERO which can be used by
__get/put_kernel_no_fault().
This is also to prepare for distinguishing the two types in machine check
safe process.
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Tong Tiangen <tongtiangen@huawei.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20220621072638.1273594-2-tongtiangen@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
With ioremap_prot() definition from generic ioremap, also move
pte_pgprot() from hugetlbpage.c into pgtable.h, then arm64 could
have HAVE_IOREMAP_PROT, which will enable generic_access_phys()
code, it is useful for debug, eg, gdb.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Link: https://lore.kernel.org/r/20220607125027.44946-7-wangkefeng.wang@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Add hook for arm64's special operation when ioremap(), then
ioremap_wc/np/cache is converted to use ioremap_prot() from
GENERIC_IOREMAP, update the Copyright and kill the unused
inclusions.
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Link: https://lore.kernel.org/r/20220607125027.44946-6-wangkefeng.wang@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Add special hook for architecture to verify addr, size or prot
when ioremap() or iounmap(), which will make the generic ioremap
more useful.
ioremap_allowed() return a bool,
- true means continue to remap
- false means skip remap and return directly
iounmap_allowed() return a bool,
- true means continue to vunmap
- false code means skip vunmap and return directly
Meanwhile, only vunmap the address when it is in vmalloc area
as the generic ioremap only returns vmalloc addresses.
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Baoquan He <bhe@redhat.com>
Link: https://lore.kernel.org/r/20220607125027.44946-5-wangkefeng.wang@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Show physical address of each ioremap in /proc/vmallocinfo.
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Link: https://lore.kernel.org/r/20220607125027.44946-4-wangkefeng.wang@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Use more meaningful and sensible naming phys_addr
instead addr in ioremap_prot().
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220610092255.32445-1-wangkefeng.wang@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Since the following commits,
v5.4
commit 59d3ae9a5bf6 ("ARM: remove Intel iop33x and iop13xx support")
v5.11
commit 3e3f354bc383 ("ARM: remove ebsa110 platform")
The runtime hook arch_iounmap() on ARM is useless, kill arch_iounmap()
and __iounmap().
Cc: Russell King <linux@armlinux.org.uk>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20220607125027.44946-2-wangkefeng.wang@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Get rid of some clunky open coded arithmetic on section addresses, by
emitting the trampoline data variables into a separate, dedicated r/o
data section, and putting it at the next page boundary. This way, we can
access the literals via single LDR instruction.
While at it, get rid of other, implicit literals, and use ADRP/ADD or
MOVZ/MOVK sequences, as appropriate. Note that the latter are only
supported for CONFIG_RELOCATABLE=n (which is usually the case if
CONFIG_RANDOMIZE_BASE=n), so update the CPP conditionals to reflect
this.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220622161010.3845775-1-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Commit b89ddf4cca43("arm64/bpf: Remove 128MB limit for BPF JIT programs")
removes the bpf jit region from the memory layout of the Aarch64
architecture. However, it forgets to update the documentation
accordingly.
- Remove the bpf jit region.
- Fix the Start and End addresses of the modules region.
- Fix the Start address of the vmalloc region.
Signed-off-by: Andre Mueller <am@emlix.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220621081651.61755-1-am@emlix.com
Signed-off-by: Will Deacon <will@kernel.org>
As "kcsan: Support detecting a subset of missing memory barriers"[1]
introduced KCSAN_STRICT/KCSAN_WEAK_MEMORY which make kcsan detects
more missing memory barrier, but arm64 don't have KCSAN instrumentation
for barriers, so the new selftest test_barrier() and test cases for
memory barrier instrumentation in kcsan_test module will fail, even
panic on selftest.
Let's prefix all barriers with __ on arm64, as asm-generic/barriers.h
defined the final instrumented version of these barriers, which will
fix the above issues.
Note, barrier instrumentation that can be disabled via __no_kcsan with
appropriate compiler-support (and not just with objtool help), see
commit bd3d5bd1a0ad ("kcsan: Support WEAK_MEMORY with Clang where no
objtool support exists"), it adds disable_sanitizer_instrumentation to
__no_kcsan attribute which will remove all sanitizer instrumentation fully
(with Clang 14.0). Meanwhile, GCC does the same thing with no_sanitize.
[1] https://lore.kernel.org/linux-mm/20211130114433.2580590-1-elver@google.com/
Acked-by: Marco Elver <elver@google.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220523113126.171714-3-wangkefeng.wang@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
The memory barrier dma_mb() is introduced by commit a76a37777f2c
("iommu/arm-smmu-v3: Ensure queue is read after updating prod pointer"),
which is used to ensure that prior (both reads and writes) accesses
to memory by a CPU are ordered w.r.t. a subsequent MMIO write.
Reviewed-by: Arnd Bergmann <arnd@arndb.de> # for asm-generic
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Marco Elver <elver@google.com>
Link: https://lore.kernel.org/r/20220523113126.171714-2-wangkefeng.wang@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Support build the zstd compressed Image.zst. Similar as other
compressed formats, the Image.zst is not self-decompressing and
the bootloader still needs to handle decompression before
launching the kernel image.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://lore.kernel.org/r/20220619170657.2657-1-jszhang@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
In cases where we unmap the kernel while running in user space, we rely
on ASIDs to distinguish the minimal trampoline from the full kernel
mapping, and this means we must use non-global attributes for those
mappings, to ensure they are scoped by ASID and will not hit in the TLB
inadvertently.
We only do this when needed, as this is generally more costly in terms
of TLB pressure, and so we boot without these non-global attributes, and
apply them to all existing kernel mappings once all CPUs are up and we
know whether or not the non-global attributes are needed. At this point,
we cannot simply unmap and remap the entire address space, so we have to
update all existing block and page descriptors in place.
Currently, we go through a lot of trouble to perform these updates with
the MMU and caches off, to avoid violating break before make (BBM) rules
imposed by the architecture. Since we make changes to page tables that
are not covered by the ID map, we gain access to those descriptors by
disabling translations altogether. This means that the stores to memory
are issued with device attributes, and require extra care in terms of
coherency, which is costly. We also rely on the ID map to access a
shared flag, which requires the ID map to be executable and writable at
the same time, which is another thing we'd prefer to avoid.
So let's switch to an approach where we replace the kernel mapping with
a minimal mapping of a few pages that can be used for a minimal, ad-hoc
fixmap that we can use to map each page table in turn as we traverse the
hierarchy.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220609174320.4035379-3-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Simplify the KPTI G-to-nG asm helper code by:
- pulling the 'table bit' test into the get/put macros so we can combine
them and incorporate the entire loop;
- moving the 'table bit' test after the update of bit #11 so we no
longer need separate next_xxx and skip_xxx labels;
- redefining the pmd/pud register aliases and the next_pmd/next_pud
labels instead of branching to them if the number of configured page
table levels is less than 3 or 4, respectively.
No functional change intended, except for the fact that we now descend
into a next level table after setting bit #11 on its descriptor but this
should make no difference in practice.
While at it, switch to .L prefixed local labels so they don't clutter up
the symbol tables, kallsyms, etc, and clean up the indentation for
legibility.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20220609174320.4035379-2-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Due to an oversight, on arm64 lockdep IRQ state tracking doesn't work as
intended in NMI context. This demonstrably results in bogus warnings
from lockdep, and in theory could mask a variety of issues.
On arm64, we've consistently tracked IRQ flag state for NMIs (and
saved/restored the state of the interrupted context) since commit:
f0cd5ac1e4c53cb6 ("arm64: entry: fix NMI {user, kernel}->kernel transitions")
That commit fixed most lockdep issues with NMI by virtue of the
save/restore of the lockdep state of the interrupted context. However,
for lockdep IRQ state tracking to consistently take effect in NMI
context it has been necessary to select TRACE_IRQFLAGS_NMI_SUPPORT since
commit:
ed00495333ccc80f ("locking/lockdep: Fix TRACE_IRQFLAGS vs. NMIs")
As arm64 does not select TRACE_IRQFLAGS_NMI_SUPPORT, this means that the
lockdep state can be stale in NMI context, and some uses of that state
can consume stale data.
When an NMI is taken arm64 entry code will call arm64_enter_nmi(). This
will enter NMI context via __nmi_enter() before calling
lockdep_hardirqs_off() to inform lockdep that IRQs have been masked.
Where TRACE_IRQFLAGS_NMI_SUPPORT is not selected, lockdep_hardirqs_off()
will not update lockdep state if called in NMI context. Thus if IRQs
were enabled in the original context, lockdep will continue to believe
that IRQs are enabled despite the call to lockdep_hardirqs_off().
However, the lockdep_assert_*() checks do take effect in NMI context,
and will consume the stale lockdep state. If an NMI is taken from a
context which had IRQs enabled, and during the handling of the NMI
something calls lockdep_assert_irqs_disabled(), this will result in a
spurious warning based upon the stale lockdep state.
This can be seen when using perf with GICv3 pseudo-NMIs. Within the perf
NMI handler we may attempt a uaccess to record the userspace callchain,
and is this faults the el1_abort() call in the nested context will call
exit_to_kernel_mode() when returning, which has a
lockdep_assert_irqs_disabled() assertion:
| # ./perf record -a -g sh
| ------------[ cut here ]------------
| WARNING: CPU: 0 PID: 164 at arch/arm64/kernel/entry-common.c:73 exit_to_kernel_mode+0x118/0x1ac
| Modules linked in:
| CPU: 0 PID: 164 Comm: perf Not tainted 5.18.0-rc5 #1
| Hardware name: linux,dummy-virt (DT)
| pstate: 004003c5 (nzcv DAIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
| pc : exit_to_kernel_mode+0x118/0x1ac
| lr : el1_abort+0x80/0xbc
| sp : ffff8000080039f0
| pmr_save: 000000f0
| x29: ffff8000080039f0 x28: ffff6831054e4980 x27: ffff683103adb400
| x26: 0000000000000000 x25: 0000000000000001 x24: 0000000000000001
| x23: 00000000804000c5 x22: 00000000000000c0 x21: 0000000000000001
| x20: ffffbd51e635ec44 x19: ffff800008003a60 x18: 0000000000000000
| x17: ffffaadf98d23000 x16: ffff800008004000 x15: 0000ffffd14f25c0
| x14: 0000000000000000 x13: 00000000000018eb x12: 0000000000000040
| x11: 000000000000001e x10: 000000002b820020 x9 : 0000000100110000
| x8 : 000000000045cac0 x7 : 0000ffffd14f25c0 x6 : ffffbd51e639b000
| x5 : 00000000000003e5 x4 : ffffbd51e58543b0 x3 : 0000000000000001
| x2 : ffffaadf98d23000 x1 : ffff6831054e4980 x0 : 0000000100110000
| Call trace:
| exit_to_kernel_mode+0x118/0x1ac
| el1_abort+0x80/0xbc
| el1h_64_sync_handler+0xa4/0xd0
| el1h_64_sync+0x74/0x78
| __arch_copy_from_user+0xa4/0x230
| get_perf_callchain+0x134/0x1e4
| perf_callchain+0x7c/0xa0
| perf_prepare_sample+0x414/0x660
| perf_event_output_forward+0x80/0x180
| __perf_event_overflow+0x70/0x13c
| perf_event_overflow+0x1c/0x30
| armv8pmu_handle_irq+0xe8/0x160
| armpmu_dispatch_irq+0x2c/0x70
| handle_percpu_devid_fasteoi_nmi+0x7c/0xbc
| generic_handle_domain_nmi+0x3c/0x60
| gic_handle_irq+0x1dc/0x310
| call_on_irq_stack+0x2c/0x54
| do_interrupt_handler+0x80/0x94
| el1_interrupt+0xb0/0xe4
| el1h_64_irq_handler+0x18/0x24
| el1h_64_irq+0x74/0x78
| lockdep_hardirqs_off+0x50/0x120
| trace_hardirqs_off+0x38/0x214
| _raw_spin_lock_irq+0x98/0xa0
| pipe_read+0x1f8/0x404
| new_sync_read+0x140/0x150
| vfs_read+0x190/0x1dc
| ksys_read+0xdc/0xfc
| __arm64_sys_read+0x20/0x30
| invoke_syscall+0x48/0x114
| el0_svc_common.constprop.0+0x158/0x17c
| do_el0_svc+0x28/0x90
| el0_svc+0x60/0x150
| el0t_64_sync_handler+0xa4/0x130
| el0t_64_sync+0x19c/0x1a0
| irq event stamp: 483
| hardirqs last enabled at (483): [<ffffbd51e636aa24>] _raw_spin_unlock_irqrestore+0xa4/0xb0
| hardirqs last disabled at (482): [<ffffbd51e636acd0>] _raw_spin_lock_irqsave+0xb0/0xb4
| softirqs last enabled at (468): [<ffffbd51e5216f58>] put_cpu_fpsimd_context+0x28/0x70
| softirqs last disabled at (466): [<ffffbd51e5216ed4>] get_cpu_fpsimd_context+0x0/0x5c
| ---[ end trace 0000000000000000 ]---
Note that as lockdep_assert_irqs_disabled() uses WARN_ON_ONCE(), and
this uses a BRK, the warning is logged with the real PSTATE at the time
of the warning, which clearly has DAIF.I set, meaning IRQs (and
pseudo-NMIs) were definitely masked and the warning is spurious.
Fix this by selecting TRACE_IRQFLAGS_NMI_SUPPORT such that the existing
entry tracking takes effect, as we had originally intended when the
arm64 entry code was fixed for transitions to/from NMI.
Arguably the lockdep_assert_*() functions should have the same NMI
checks as the rest of the code to prevent spurious warnings when
TRACE_IRQFLAGS_NMI_SUPPORT is not selected, but the real fix for any
architecture is to explicitly handle the transitions to/from NMI in the
entry code.
Fixes: f0cd5ac1e4c5 ("arm64: entry: fix NMI {user, kernel}->kernel transitions")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20220511131733.4074499-3-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
On most architectures, IRQ flag tracing is disabled in NMI context, and
architectures need to define and select TRACE_IRQFLAGS_NMI_SUPPORT in
order to enable this.
Commit:
859d069ee1ddd878 ("lockdep: Prepare for NMI IRQ state tracking")
Permitted IRQ flag tracing in NMI context, allowing lockdep to work in
NMI context where an architecture had suitable entry logic. At the time,
most architectures did not have such suitable entry logic, and this broke
lockdep on such architectures. Thus, this was partially disabled in
commit:
ed00495333ccc80f ("locking/lockdep: Fix TRACE_IRQFLAGS vs. NMIs")
... with architectures needing to select TRACE_IRQFLAGS_NMI_SUPPORT to
enable IRQ flag tracing in NMI context.
Currently TRACE_IRQFLAGS_NMI_SUPPORT is defined under
arch/x86/Kconfig.debug. Move it to arch/Kconfig so architectures can
select it without having to provide their own definition.
Since the regular TRACE_IRQFLAGS_SUPPORT is selected by
arch/x86/Kconfig, the select of TRACE_IRQFLAGS_NMI_SUPPORT is moved
there too.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20220511131733.4074499-2-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
The arm64 support of the generic ARM cpuidle driver was removed. This
let us remove all support code for it.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20220529181329.2345722-3-michael@walle.cc
Signed-off-by: Will Deacon <will@kernel.org>
Since commit 788961462f34 ("ARM: psci: cpuidle: Enable PSCI CPUidle
driver") the generic ARM cpuidle driver doesn't probe anymore because
arm_cpuidle_init() will always return -EOPNOTSUPP. That is, because the
mentioned commit removes the only .cpu_suspend and .cpu_init_idle
provider.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20220529181329.2345722-2-michael@walle.cc
Signed-off-by: Will Deacon <will@kernel.org>
- Make RESERVE_BRK() work again with older binutils. The recent
'simplification' broke that.
- Make early #VE handling increment RIP when successful.
- Make the #VE code consistent vs. the RIP adjustments and add comments.
- Handle load_unaligned_zeropad() across page boundaries correctly in #VE
when the second page is shared.
-----BEGIN PGP SIGNATURE-----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=sRtG
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2022-06-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
- Make RESERVE_BRK() work again with older binutils. The recent
'simplification' broke that.
- Make early #VE handling increment RIP when successful.
- Make the #VE code consistent vs. the RIP adjustments and add
comments.
- Handle load_unaligned_zeropad() across page boundaries correctly in
#VE when the second page is shared.
* tag 'x86-urgent-2022-06-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/tdx: Handle load_unaligned_zeropad() page-cross to a shared page
x86/tdx: Clarify RIP adjustments in #VE handler
x86/tdx: Fix early #VE handling
x86/mm: Fix RESERVE_BRK() for older binutils
