IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
- Allow an invalid regulator in mmc_regulator_set_ocr()
- Log about empty non-removable slots
- Add helpers to enable/disable the vqmmc regulator
MMC host:
- mtk-sd: Add support for the mt8365 variant
- renesas_sdhi: Remove support for R-Car H3 ES1.* variants
- sdhci_am654: Add power management support
- sdhci-cadence: Add support for eMMC hardware reset
- sdhci-cadence: Add support for AMD Pensando Elba variant
- sdhci-msm: Add support for the IPQ5018 variant
- sdhci-msm: Add support for the QCM2290 variant
- sdhci-of-arasan: Skip setting clock delay for 400KHz
- sdhci-of-arasan: Add support for the Xilinx Versal Net variant
- sdhci-of-arasan: Remove Intel Thunder Bay SOC support
- sdhci-of-arasan: Add support to request the "gate" clock
- sdhci-of-dwcmshc: Properly determine max clock on Rockchip
- sdhci-of-esdhc: Fix quirk to ignore command inhibit for data
- sdhci-pci-o2micro: Fix SDR50 mode timing issue
MEMSTICK:
- r592: Fix use-after-free bug in r592_remove due to race condition
-----BEGIN PGP SIGNATURE-----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=qt1U
-----END PGP SIGNATURE-----
Merge tag 'mmc-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC updates from Ulf Hansson:
"MMC core:
- Allow an invalid regulator in mmc_regulator_set_ocr()
- Log about empty non-removable slots
- Add helpers to enable/disable the vqmmc regulator
MMC host:
- mtk-sd: Add support for the mt8365 variant
- renesas_sdhi: Remove support for R-Car H3 ES1.* variants
- sdhci_am654: Add power management support
- sdhci-cadence: Add support for eMMC hardware reset
- sdhci-cadence: Add support for AMD Pensando Elba variant
- sdhci-msm: Add support for the IPQ5018 variant
- sdhci-msm: Add support for the QCM2290 variant
- sdhci-of-arasan: Skip setting clock delay for 400KHz
- sdhci-of-arasan: Add support for the Xilinx Versal Net variant
- sdhci-of-arasan: Remove Intel Thunder Bay SOC support
- sdhci-of-arasan: Add support to request the "gate" clock
- sdhci-of-dwcmshc: Properly determine max clock on Rockchip
- sdhci-of-esdhc: Fix quirk to ignore command inhibit for data
- sdhci-pci-o2micro: Fix SDR50 mode timing issue
MEMSTICK:
- r592: Fix use-after-free bug in r592_remove due to race condition"
* tag 'mmc-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (40 commits)
dt-bindings: mmc: sdhci-msm: Document the IPQ5018 compatible
mmc: vub300: remove unreachable code
mmc: sdhci-cadence: Support mmc hardware reset
mmc: sdhci-cadence: Add AMD Pensando Elba SoC support
mmc: sdhci-cadence: Support device specific init during probe
mmc: sdhci-cadence: Enable device specific override of writel()
dt-bindings: mmc: cdns: Add AMD Pensando Elba SoC
mmc: core: Remove unused macro mmc_req_rel_wr
mmc: sdhci-of-arasan: Skip setting clock delay for 400KHz
mmc: sdhci-of-arasan: Add support for eMMC5.1 on Xilinx Versal Net platform
dt-bindings: mmc: arasan,sdci: Add Xilinx Versal Net compatible
mmc: sdhci_am654: Add support for PM suspend/resume
mmc: core: remove unnecessary (void*) conversions
dt-bindings: mmc: fsl-imx-esdhc: ref sdhci-common.yaml
mmc: sdhci-of-esdhc: fix quirk to ignore command inhibit for data
mmc: core: Log about empty non-removable slots
dt-bindings: mmc: fujitsu: Add Socionext Synquacer
mmc: sdricoh_cs: remove unused sdricoh_readw function
dt-bindings: mmc: Remove bindings for Intel Thunder Bay SoC"
mmc: sdhci-of-arasan: Remove Intel Thunder Bay SOC support
...
* dt-bindings: Drop unneeded quotes
* mtdblock: Tolerate corrected bit-flips
* Use of_property_read_bool() for boolean properties
* Avoid magic values
* Avoid printing error messages on probe deferrals
* Prepare mtd_otp_nvmem_add() to handle -EPROBE_DEFER
* Fix error path for nvmem provider
* Fix nvmem error reporting
* Provide unique name for nvmem device
MTD device changes:
* lpddr_cmds: Remove unused words variable
* bcm63xxpart: Remove MODULE_LICENSE in non-modules
SPI NOR core changes:
* Introduce Read While Write support for flashes featuring several banks
* Set the 4-Byte Address Mode method based on SFDP data
* Allow post_sfdp hook to return errors
* Parse SCCR MC table and introduce support for multi-chip devices
SPI NOR manufacturer drivers changes:
* macronix: Add support for mx25uw51245g with RWW
* spansion:
- Determine current address mode at runtime as it can be changed in a
non-volatile way and differ from factory defaults or from what SFDP
advertises.
- Enable JFFS2 write buffer mode for few ECC'd NOR flashes: S25FS256T,
s25hx and s28hx
- Add support for s25hl02gt and s25hs02gt
Raw NAND core changes:
* Convert to platform remove callback returning void
* Fix spelling mistake waifunc() -> waitfunc()
Raw NAND controller driver changes:
* imx: Remove unused is_imx51_nfc and imx53_nfc functions
* omap2: Drop obsolete dependency on COMPILE_TEST
* orion: Use devm_platform_ioremap_resource()
* qcom:
- Use of_property_present() for testing DT property presence
- Use devm_platform_get_and_ioremap_resource()
* stm32_fmc2: Depends on ARCH_STM32 instead of MACH_STM32MP157
* tmio: Remove reference to config MTD_NAND_TMIO in the parsers
Raw NAND manufacturer driver changes:
* hynix: Fix up bit 0 of sdr_timing_mode
SPI-NAND changes:
* Add support for ESMT F50x1G41LB
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAmRANmIACgkQJWrqGEe9
VoRU2QgAl8XFkLs1h88wGi6ln/MSK0cQJZWUzteGgWuaBQCMNfgGFzqPHyJ7ygO9
l4U4O1L/IvACvJx5QHm/lH5Mig23jym9J8YfV1Kf9aVYOlBKRNysbi+DdktESGG9
6HmpS0nQfkC84qA8ouInOp+AZYjFEPRrBfp5UWkSRHiQJvcYnt2iS2oOLk3LNY6y
zduBOno3mric2ZlBbg+ZCURhQzrr3k8c4VXV+LHSslqsmH/2sOFlg78hLJx922Y+
FTfYnx82iLIvFAJttRi2bXWKuE1Yr2XWJ3iEHKxmOA2vPmYi6mDBHTYhnikGSpm+
GhARHH+JhW7qzLbaq5ZC3HGH58aC/g==
=aYlo
-----END PGP SIGNATURE-----
Merge tag 'mtd/for-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull mtd updates from Miquel Raynal:
"Core MTD changes:
- dt-bindings: Drop unneeded quotes
- mtdblock: Tolerate corrected bit-flips
- Use of_property_read_bool() for boolean properties
- Avoid magic values
- Avoid printing error messages on probe deferrals
- Prepare mtd_otp_nvmem_add() to handle -EPROBE_DEFER
- Fix error path for nvmem provider
- Fix nvmem error reporting
- Provide unique name for nvmem device
MTD device changes:
- lpddr_cmds: Remove unused words variable
- bcm63xxpart: Remove MODULE_LICENSE in non-modules
SPI NOR core changes:
- Introduce Read While Write support for flashes featuring several
banks
- Set the 4-Byte Address Mode method based on SFDP data
- Allow post_sfdp hook to return errors
- Parse SCCR MC table and introduce support for multi-chip devices
SPI NOR manufacturer drivers changes:
- macronix: Add support for mx25uw51245g with RWW
- spansion:
- Determine current address mode at runtime as it can be changed
in a non-volatile way and differ from factory defaults or from
what SFDP advertises.
- Enable JFFS2 write buffer mode for few ECC'd NOR flashes:
S25FS256T, s25hx and s28hx
- Add support for s25hl02gt and s25hs02gt
Raw NAND core changes:
- Convert to platform remove callback returning void
- Fix spelling mistake waifunc() -> waitfunc()
Raw NAND controller driver changes:
- imx: Remove unused is_imx51_nfc and imx53_nfc functions
- omap2: Drop obsolete dependency on COMPILE_TEST
- orion: Use devm_platform_ioremap_resource()
- qcom:
- Use of_property_present() for testing DT property presence
- Use devm_platform_get_and_ioremap_resource()
- stm32_fmc2: Depends on ARCH_STM32 instead of MACH_STM32MP157
- tmio: Remove reference to config MTD_NAND_TMIO in the parsers
Raw NAND manufacturer driver changes:
- hynix: Fix up bit 0 of sdr_timing_mode
SPI-NAND changes:
- Add support for ESMT F50x1G41LB"
* tag 'mtd/for-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (55 commits)
mtd: nand: Convert to platform remove callback returning void
mtd: onenand: omap2: Drop obsolete dependency on COMPILE_TEST
mtd: spi-nor: spansion: Add support for s25hl02gt and s25hs02gt
mtd: spi-nor: spansion: Add a new ->ready() hook for multi-chip device
mtd: spi-nor: spansion: Rework cypress_nor_quad_enable_volatile() for multi-chip device support
mtd: spi-nor: spansion: Rework cypress_nor_get_page_size() for multi-chip device support
mtd: spi-nor: sfdp: Add support for SCCR map for multi-chip device
mtd: spi-nor: Extract volatile register offset from SCCR map
mtd: spi-nor: Allow post_sfdp hook to return errors
mtd: spi-nor: spansion: Rename method to cypress_nor_get_page_size
mtd: spi-nor: spansion: Enable JFFS2 write buffer for S25FS256T
mtd: spi-nor: spansion: Enable JFFS2 write buffer for Infineon s25hx SEMPER flash
mtd: spi-nor: spansion: Enable JFFS2 write buffer for Infineon s28hx SEMPER flash
mtd: spi-nor: spansion: Determine current address mode
mtd: spi-nor: core: Introduce spi_nor_set_4byte_addr_mode()
mtd: spi-nor: core: Update flash's current address mode when changing address mode
mtd: spi-nor: Stop exporting spi_nor_restore()
mtd: spi-nor: Set the 4-Byte Address Mode method based on SFDP data
mtd: spi-nor: core: Make spi_nor_set_4byte_addr_mode_brwr public
mtd: spi-nor: core: Update name and description of spi_nor_set_4byte_addr_mode
...
New drivers:
- add a driver for the Loongson GPIO controller
- add a driver for the fxl6408 I2C GPIO expander
- add a GPIO module containing code common for Intel Elkhart Lake and
Merrifield platforms
- add a driver for the Intel Elkhart Lake platform reusing the code from
the intel tangier library
GPIOLIB core:
- GPIO ACPI improvements
- simplify gpiochip_add_data_with_keys() fwnode handling
- cleanup header inclusions (remove unneeded ones, order the rest
alphabetically)
- remove duplicate code (reuse krealloc() instead of open-coding it, drop
a duplicated check in gpiod_find_and_request())
- reshuffle the code to remove unnecessary forward declarations
- coding style cleanups and improvements
- add a helper for accessing device fwnodes
- small updates in docs
Driver improvements:
- convert all remaining GPIO irqchip drivers to using immutable irqchips
- drop unnecessary of_match_ptr() macro expansions
- shrink the code in gpio-merrifield significantly by reusing the code from
gpio-tangier + minor tweaks to the driver code
- remove MODULE_LICENSE() from drivers that can only be built-in
- add device-tree support to gpio-loongson1
- use new regmap features in gpio-104-dio-48e and gpio-pcie-idio-24
- minor tweaks and fixes to gpio-xra1403, gpio-sim, gpio-tegra194, gpio-omap,
gpio-aspeed, gpio-raspberrypi-exp
- shrink code in gpio-ich and gpio-pxa
- Kconfig tweak for gpio-pmic-eic-sprd
-----BEGIN PGP SIGNATURE-----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=X+sP
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"We have some new drivers, significant refactoring of existing intel
platforms, lots of improvements all around, mass conversion to using
immutable irqchips by drivers that had not been converted individually
yet and some changes in the core library code.
Summary:
New drivers:
- add a driver for the Loongson GPIO controller
- add a driver for the fxl6408 I2C GPIO expander
- add a GPIO module containing code common for Intel Elkhart Lake and
Merrifield platforms
- add a driver for the Intel Elkhart Lake platform reusing the code
from the intel tangier library
GPIOLIB core:
- GPIO ACPI improvements
- simplify gpiochip_add_data_with_keys() fwnode handling
- cleanup header inclusions (remove unneeded ones, order the rest
alphabetically)
- remove duplicate code (reuse krealloc() instead of open-coding it,
drop a duplicated check in gpiod_find_and_request())
- reshuffle the code to remove unnecessary forward declarations
- coding style cleanups and improvements
- add a helper for accessing device fwnodes
- small updates in docs
Driver improvements:
- convert all remaining GPIO irqchip drivers to using immutable
irqchips
- drop unnecessary of_match_ptr() macro expansions
- shrink the code in gpio-merrifield significantly by reusing the
code from gpio-tangier + minor tweaks to the driver code
- remove MODULE_LICENSE() from drivers that can only be built-in
- add device-tree support to gpio-loongson1
- use new regmap features in gpio-104-dio-48e and gpio-pcie-idio-24
- minor tweaks and fixes to gpio-xra1403, gpio-sim, gpio-tegra194,
gpio-omap, gpio-aspeed, gpio-raspberrypi-exp
- shrink code in gpio-ich and gpio-pxa
- Kconfig tweak for gpio-pmic-eic-sprd"
* tag 'gpio-updates-for-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (99 commits)
gpio: gpiolib: Simplify gpiochip_add_data_with_key() fwnode
gpiolib: Add gpiochip_set_data() helper
gpiolib: Move gpiochip_get_data() higher in the code
gpiolib: Check array_info for NULL only once in gpiod_get_array()
gpiolib: Replace open coded krealloc()
gpiolib: acpi: Add a ignore wakeup quirk for Clevo NL5xNU
gpiolib: acpi: Move ACPI device NULL check to acpi_get_driver_gpio_data()
gpiolib: acpi: use the fwnode in acpi_gpiochip_find()
gpio: mm-lantiq: Fix typo in the newly added header filename
sh: mach-x3proto: Add missing #include <linux/gpio/driver.h>
powerpc/40x: Add missing select OF_GPIO_MM_GPIOCHIP
gpio: xlp: Convert to immutable irq_chip
gpio: xilinx: Convert to immutable irq_chip
gpio: xgs-iproc: Convert to immutable irq_chip
gpio: visconti: Convert to immutable irq_chip
gpio: tqmx86: Convert to immutable irq_chip
gpio: thunderx: Convert to immutable irq_chip
gpio: stmpe: Convert to immutable irq_chip
gpio: siox: Convert to immutable irq_chip
gpio: rda: Convert to immutable irq_chip
...
A fairly quiet release, there were some cleanup and a couple of new
devices but the biggest change was converting most of the drivers to use
asynchronous probe. This allows us to ramp up multiple regulators in
parallel during boot which can have a noticable impact on modern
systems.
- Update of drivers to PROBE_PREFER_ASYNCHRONOUS to mitigate issues
with ramp times slowing down boots.
- Convert to void remove callbacks.
- Support for voltage monitoring on DA9063
- Support for Qualcomm PMC8180 and PMM8654au, Richtek RT4803 and
RT5739, Rockchip RK860x,
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmRGfzcACgkQJNaLcl1U
h9B5oAgAgNkRTmrHDzuyFZD0JUt6Wy0jewxNH7Ie5ucYEPNPaWGfPDvJkpjDZ/iB
UTPrhFAvNfVX2Z2E3Pdx4jhvbq3chlavpDaMWEqnimdfIqqqHLPEiRtVG2DiXAub
2AKS8piy136EDtWf4/HCoKiLf5Osr4i6bpOUoaHoNIqTtjhu2p7FXC9rjuRsmQgC
8kiA/fsLRcdzyhQb86myl4QktYiWTCrHzP7jpKlHAHRf5OBozapGgPR2Ih/cNoTR
0lbdvst1arkUr1wMGqvYAg1UjlAmA9TA/1kkm6j98G6ruuUzeay9bGN9tCk4SMjf
kAXks6ohTS9VvqN5ykrjm/2WF/Y9yA==
=AJNv
-----END PGP SIGNATURE-----
Merge tag 'regulator-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"A fairly quiet release, there were some cleanup and a couple of new
devices but the biggest change was converting most of the drivers to
use asynchronous probe. This allows us to ramp up multiple regulators
in parallel during boot which can have a noticable impact on modern
systems.
Summary:
- Update of drivers to PROBE_PREFER_ASYNCHRONOUS to mitigate issues
with ramp times slowing down boots.
- Convert to void remove callbacks.
- Support for voltage monitoring on DA9063
- Support for Qualcomm PMC8180 and PMM8654au, Richtek RT4803 and
RT5739, Rockchip RK860x"
* tag 'regulator-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (46 commits)
regulator: dt-bindings: qcom,rpmh: Combine PM6150L and PM8150L if-then
regulator: core: Make regulator_lock_two() logic easier to follow
regulator: dt-bindings: qcom,rpmh: Correct PM8550 family supplies
regulator: stm32-pwr: fix of_iomap leak
dt-bindings: mfd: dlg,da9063: document voltage monitoring
regulator: da9063: implement setter for voltage monitoring
regulator: da9063: add voltage monitoring registers
regulator: fan53555: Add support for RK860X
regulator: fan53555: Use dev_err_probe
regulator: fan53555: Improve vsel_mask computation
regulator: fan53555: Make use of the bit macros
regulator: fan53555: Remove unused *_SLEW_SHIFT definitions
regulator: dt-bindings: fcs,fan53555: Add support for RK860X
regulator: qcom_smd: Add MP5496 S1 regulator
regulator: qcom_smd: Add s1 sub-node to mp5496 regulator
regulator: qcom,rpmh: add compatible for pmm8654au RPMH
regulator: qcom-rpmh: add support for pmm8654au regulators
regulator: core: Avoid lockdep reports when resolving supplies
regulator: core: Consistently set mutex_owner when using ww_mutex_lock_slow()
regulator: dt-bindings: qcom,rpmh: Add compatible for PMC8180
...
This is a much bigger change for regmap than is normal, the main things
being the addition of some KUnit coverage and a maple tree based
register cache which longer term is likely to replace the rbtree cache
except possibly for very small register maps. While it's complete
overkill for most applications the code for maple trees is there and
there are some larger, sparser devices where the data structure is a
better fit.
The maple tree support is still a work in progress but already useful,
there's some conversions of drivers ready to go after the merge window.
- Support for shifting register addresses up as well as down, there's a
use cases with memory mapped MDIO.
- Refactoring of the type configuration in regmap-irq to allow access
to driver data in the handler, needed by some GPIO devices.
- Some initial KUnit coverage, the bulk of the driver facing API is
covered but there's holes and things like the data marshalling for
bytestream buses are just not covered in the slightest.
- Removal of the compressed cache type, it had zero users and was
getting in the way of KUnit.
- Addition of a maple tree based register cache, there's more work to
do but it's already useful for some devices with a flatter data
structure than rbtree and getting to use all the optimisation work
Liam is doing.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmRGe7QACgkQJNaLcl1U
h9BNSwf9ElqCWZgVGjMoF4b5+1M0rD6jQXbWshwRYjnvVIBaMtTXuCIZmzdmV6pH
oQTiDaTCiZGQVne3Cobncf0Pk1FTtuE3IL39CB5X355cqrkMOOxw57NYufDhhQTk
UJNTORbHPZGLOmLigVeK5nVFyGUTcSt9s9Haqz1S85Ao3rnXMw9IrC5L1QAv73zQ
pNQTLOdZDyg+vdW5Yuc0sVY5PnmVLIF5abI6E1MXumCLyQ8wS2Px1fUYXnQHmtJ1
2pZFYoqjxxIfObzC1SIsZFh0lkDdPe7WBeSKsGORhWiiCY5nYba1CiZ5DFNWR8hf
hJkxbALhdk6Iksvz0X14nAP6ESv66A==
=1hr2
-----END PGP SIGNATURE-----
Merge tag 'regmap-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"This is a much bigger change for regmap than is normal, the main
things being the addition of some KUnit coverage and a maple tree
based register cache which longer term is likely to replace the rbtree
cache except possibly for very small register maps.
While it's complete overkill for most applications the code for maple
trees is there and there are some larger, sparser devices where the
data structure is a better fit.
The maple tree support is still a work in progress but already useful,
there's some conversions of drivers ready to go after the merge
window.
Summary:
- Support for shifting register addresses up as well as down, there's
a use cases with memory mapped MDIO.
- Refactoring of the type configuration in regmap-irq to allow access
to driver data in the handler, needed by some GPIO devices.
- Some initial KUnit coverage, the bulk of the driver facing API is
covered but there's holes and things like the data marshalling for
bytestream buses are just not covered in the slightest.
- Removal of the compressed cache type, it had zero users and was
getting in the way of KUnit.
- Addition of a maple tree based register cache, there's more work to
do but it's already useful for some devices with a flatter data
structure than rbtree and getting to use all the optimisation work
Liam is doing"
* tag 'regmap-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: allow upshifting register addresses before performing operations
regmap: Pass irq_drv_data as a parameter for set_type_config()
regmap: Use mas_walk() instead of mas_find()
regmap: Fix double unlock in the maple cache
regmap: Add maple tree based register cache
regmap: Factor out single value register syncing
regmap: Add some basic kunit tests
regmap: Add RAM backed register map
regmap: Removed compressed cache support
regmap: Support paging for buses with reg_read()/reg_write()
regmap: Clarify error for unknown cache types
regmap: Handle sparse caches in the default sync
regmap: add a helper to translate the register address
regmap: cache: Silence checkpatch warning
regmap: cache: Return error in cache sync operations for REGCACHE_NONE
regmap-irq: Place kernel doc of struct regmap_irq_chip in order
regmap-irq: Add no_status support
regmap: sdw: Remove 8-bit value size restriction
regmap: sdw: Update misleading comment
Highlights:
- AMD PMC and PMF drivers:
- Numerous bugfixes
- Intel Speed Select Technology (ISST):
- TPMI (Topology Aware Register and PM Capsule Interface) support
for ISST support on upcoming processor models
- Various other improvements / new hw support
- tools/intel-speed-select: TPMI support + other improvements
- Intel In Field Scan (IFS):
- Add Array Bist test support
- New drivers:
- intel_bytcrc_pwrsrc Crystal Cove PMIC pwrsrc / reset-reason driver
- lenovo-ymc Yoga Mode Control driver for reporting SW_TABLET_MODE
- msi-ec Driver for MSI laptop EC features like battery charging limits
- apple-gmux:
- Support for new MMIO based models (T2 Macs)
- Honor acpi_backlight= auto-detect-code + kernel cmdline option
to switch between gmux and apple_bl backlight drivers and remove
own custom handling for this
- x86-android-tablets: Refactor / cleanup + new hw support
- Miscellaneous other cleanups / fixes
The following is an automated git shortlog grouped by driver:
Add driver for Yoga Tablet Mode switch:
- Add driver for Yoga Tablet Mode switch
Add intel_bytcrc_pwrsrc driver:
- Add intel_bytcrc_pwrsrc driver
Add new msi-ec driver:
- Add new msi-ec driver
Documentation/ABI:
- Update IFS ABI doc
ISST:
- unlock on error path in tpmi_sst_init()
- Add suspend/resume callbacks
- Add SST-TF support via TPMI
- Add SST-BF support via TPMI
- Add SST-PP support via TPMI
- Add SST-CP support via TPMI
- Parse SST MMIO and update instance
- Enumerate TPMI SST and create framework
- Add support for MSR 0x54
- Add API version of the target
- Add IOCTL default callback
- Add TPMI target
Merge remote-tracking branch 'intel-speed-select/intel-sst' into review-hans:
- Merge remote-tracking branch 'intel-speed-select/intel-sst' into review-hans
Merge tag 'ib-pdx86-backlight-6.4' into review-hans:
- Merge tag 'ib-pdx86-backlight-6.4' into review-hans
Move ideapad ACPI helpers to a new header:
- Move ideapad ACPI helpers to a new header
acer-wmi:
- Convert to platform remove callback returning void
acerhdf:
- Remove unneeded semicolon
adv_swbutton:
- Convert to platform remove callback returning void
amilo-rfkill:
- Convert to platform remove callback returning void
apple-gmux:
- Fix iomem_base __iomem annotation
- return -EFAULT if copy fails
- Update apple_gmux_detect documentation
- Add acpi_video_get_backlight_type() check
- add debugfs interface
- support MMIO gmux on T2 Macs
- refactor gmux types
- use first bit to check switch state
backlight:
- apple_bl: Use acpi_video_get_backlight_type()
barco-p50-gpio:
- Convert to platform remove callback returning void
classmate:
- mark SPI related data as maybe unused
compal-laptop:
- Convert to platform remove callback returning void
dell:
- dell-smo8800: Convert to platform remove callback returning void
- dcdbas: Convert to platform remove callback returning void
dell-laptop:
- Register ctl-led for speaker-mute
hp:
- tc1100-wmi: Convert to platform remove callback returning void
- hp_accel: Convert to platform remove callback returning void
huawei-wmi:
- Convert to platform remove callback returning void
ideapad-laptop:
- Convert to platform remove callback returning void
intel:
- vbtn: Convert to platform remove callback returning void
- telemetry: pltdrv: Convert to platform remove callback returning void
- pmc: core: Convert to platform remove callback returning void
- mrfld_pwrbtn: Convert to platform remove callback returning void
- int3472: discrete: Convert to platform remove callback returning void
- int1092: intel_sar: Convert to platform remove callback returning void
- int0002_vgpio: Convert to platform remove callback returning void
- hid: Convert to platform remove callback returning void
- chtwc_int33fe: Convert to platform remove callback returning void
- chtdc_ti_pwrbtn: Convert to platform remove callback returning void
- bxtwc_tmu: Convert to platform remove callback returning void
intel-uncore-freq:
- Add client processors
mlxbf-bootctl:
- Add sysfs file for BlueField boot fifo
pcengines-apuv2:
- Drop platform:pcengines-apuv2 module-alias
platform/mellanox:
- add firmware reset support
platform/olpc:
- olpc-xo175-ec: Use SPI device ID data to bind device
platform/surface:
- aggregator_registry: Add support for tablet-mode switch on Surface Pro 9
- aggregator_tabletsw: Add support for Type-Cover posture source
- aggregator_tabletsw: Properly handle different posture source IDs
platform/x86/amd:
- pmc: provide user message where s0ix is not supported
- pmc: Remove __maybe_unused from amd_pmc_suspend_handler()
- pmc: Convert to platform remove callback returning void
- pmc: Fix memory leak in amd_pmc_stb_debugfs_open_v2()
- pmc: Move out of BIOS SMN pair for STB init
- pmc: Utilize SMN index 0 for driver probe
- pmc: Move idlemask check into `amd_pmc_idlemask_read`
- pmc: Don't dump data after resume from s0i3 on picasso
- pmc: Hide SMU version and program attributes for Picasso
- pmc: Don't try to read SMU version on Picasso
- pmf: core: Convert to platform remove callback returning void
- hsmp: Convert to platform remove callback returning void
platform/x86/amd/pmf:
- Move out of BIOS SMN pair for driver probe
platform/x86/intel:
- vsec: Use intel_vsec_dev_release() to simplify init() error cleanup
- vsec: Explicitly enable capabilities
platform/x86/intel/ifs:
- Update IFS doc
- Implement Array BIST test
- Sysfs interface for Array BIST
- Introduce Array Scan test to IFS
- IFS cleanup
- Reorganize driver data
- Separate ifs_pkg_auth from ifs_data
platform/x86/intel/pmc/mtl:
- Put GNA/IPU/VPU devices in D3
platform/x86/intel/pmt:
- Ignore uninitialized entries
- Add INTEL_PMT module namespace
platform/x86/intel/sdsi:
- Change mailbox timeout
samsung-q10:
- Convert to platform remove callback returning void
serial-multi-instantiate:
- Convert to platform remove callback returning void
sony:
- mark SPI related data as maybe unused
think-lmi:
- Remove unnecessary casts for attributes
- Remove custom kobject sysfs_ops
- Properly interpret return value of tlmi_setting
thinkpad_acpi:
- Fix Embedded Controller access on X380 Yoga
tools/power/x86/intel-speed-select:
- Update version
- Change TRL display for Emerald Rapids
- Identify Emerald Rapids
- Display AMX base frequency
- Use cgroup v2 isolation
- Add missing free cpuset
- Fix clos-max display with TPMI I/F
- Add cpu id check
- Avoid setting duplicate tdp level
- Remove cpu mask display for non-cpu power domain
- Hide invalid TRL level
- Display fact info for non-cpu power domain
- Show level 0 name for new api_version
- Prevent cpu clos config for non-cpu power domain
- Allow display non-cpu power domain info
- Display amx_p1 and cooling_type
- Display punit info
- Introduce TPMI interface support
- Get punit core mapping information
- Introduce api_version helper
- Support large clos_min/max
- Introduce is_debug_enabled()
- Allow api_version based platform callbacks
- Move send_mbox_cmd to isst-core-mbox.c
- Abstract adjust_uncore_freq
- Abstract read_pm_config
- Abstract clos_associate
- Abstract clos_get_assoc_status
- Abstract set_clos
- Abstract pm_get_clos
- Abstract pm_qos_config
- Abstract get_clos_information
- Abstract get_get_trls
- Enhance get_tdp_info
- Abstract get_uncore_p0_p1_info
- Abstract get_fact_info
- Abstract set_pbf_fact_status
- Remove isst_get_pbf_info_complete
- Abstract get_pbf_info
- Abstract set_tdp_level
- Abstract get_trl_bucket_info
- Abstract get_get_trl
- Abstract get_coremask_info
- Abstract get_tjmax_info
- Move code right before its caller
- Abstract get_pwr_info
- Abstract get_tdp_info
- Abstract get_ctdp_control
- Abstract get_config_levels
- Abstract is_punit_valid
- Introduce isst-core-mbox.c
- Always invoke isst_fill_platform_info
- Introduce isst_get_disp_freq_multiplier
- Move mbox functions to isst-core.c
- Improve isst_print_extended_platform_info
- Rename for_each_online_package_in_set
- Introduce support for multi-punit
- Introduce isst_is_punit_valid()
- Introduce punit to isst_id
- Follow TRL nameing for FACT info
- Unify TRL levels
wmi:
- Convert to platform remove callback returning void
x86-android-tablets:
- Add accelerometer support for Yoga Tablet 2 1050/830 series
- Add "yogabook-touch-kbd-digitizer-switch" pdev for Lenovo Yoga Book
- Add Wacom digitizer info for Lenovo Yoga Book
- Update Yoga Book HiDeep touchscreen comment
- Add Lenovo Yoga Book X90F/L data
- Share lp855x_platform_data between different models
- Use LP8557 in direct mode on both the Yoga 830 and the 1050
- Add depends on PMIC_OPREGION
- Lenovo Yoga Book match is for YB1-X91 models only
- Add LID switch support for Yoga Tablet 2 1050/830 series
- Add backlight ctrl for Lenovo Yoga Tab 3 Pro YT3-X90F
- Add touchscreen support for Lenovo Yoga Tab 3 Pro YT3-X90F
- Add support for the Dolby button on Peaq C1010
- Add gpio_keys support to x86_android_tablet_init()
- Move remaining tablets to other.c
- Move Lenovo tablets to their own file
- Move Asus tablets to their own file
- Move shared power-supply fw-nodes to a separate file
- Move DMI match table into its own dmi.c file
- Move core code into new core.c file
- Move into its own subdir
- Add Acer Iconia One 7 B1-750 data
x86/include/asm/msr-index.h:
- Add IFS Array test bits
xo1-rfkill:
- Convert to platform remove callback returning void
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmRGmK4UHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9yBCAf+PebzfccC2ABHq+nFGSok18beRtFf
fGs9NI21Mjdbhhy+KsKddgZceh7pbdcaIznuka3TZAK0UXcHRe30X3eoDvSCk9YW
Xj/Uf3ExsipNh1Ung+Q1qTWtzUw7XdJWqMZ5HxlUI2ZlmSTAIOyZBpSEPrK052oi
lAbSqrnB1DEh1qYV4Q7g71R82iAR791DAH1dsDZwC1Zb6KK6fxI/zQhw4JP1XSCs
htE5RFUzPWiXG2ou5t6Nteju/QqEaCoIS7z7ZK/SgWcLlPxeksxwso3obI/U8PvD
JMmMiY4VFzizuGqTZHiy/EtKXo1pq+fOcMEqSuaaDfcYgdHmLm0OIU12Ig==
=51xc
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
- AMD PMC and PMF drivers:
- Numerous bugfixes
- Intel Speed Select Technology (ISST):
- TPMI (Topology Aware Register and PM Capsule Interface) support
for ISST support on upcoming processor models
- Various other improvements / new hw support
- tools/intel-speed-select: TPMI support + other improvements
- Intel In Field Scan (IFS):
- Add Array Bist test support
- New drivers:
- intel_bytcrc_pwrsrc Crystal Cove PMIC pwrsrc / reset-reason driver
- lenovo-ymc Yoga Mode Control driver for reporting SW_TABLET_MODE
- msi-ec Driver for MSI laptop EC features like battery charging limits
- apple-gmux:
- Support for new MMIO based models (T2 Macs)
- Honor acpi_backlight= auto-detect-code + kernel cmdline option
to switch between gmux and apple_bl backlight drivers and remove
own custom handling for this
- x86-android-tablets: Refactor / cleanup + new hw support
- Miscellaneous other cleanups / fixes
* tag 'platform-drivers-x86-v6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (178 commits)
platform/x86: x86-android-tablets: Add accelerometer support for Yoga Tablet 2 1050/830 series
platform/x86: x86-android-tablets: Add "yogabook-touch-kbd-digitizer-switch" pdev for Lenovo Yoga Book
platform/x86: x86-android-tablets: Add Wacom digitizer info for Lenovo Yoga Book
platform/x86: x86-android-tablets: Update Yoga Book HiDeep touchscreen comment
platform/x86: thinkpad_acpi: Fix Embedded Controller access on X380 Yoga
platform/x86/intel/sdsi: Change mailbox timeout
platform/x86/intel/pmt: Ignore uninitialized entries
platform/x86: amd: pmc: provide user message where s0ix is not supported
platform/x86/amd: pmc: Fix memory leak in amd_pmc_stb_debugfs_open_v2()
mlxbf-bootctl: Add sysfs file for BlueField boot fifo
platform/x86: amd: pmc: Remove __maybe_unused from amd_pmc_suspend_handler()
platform/x86/intel/pmc/mtl: Put GNA/IPU/VPU devices in D3
platform/x86/amd: pmc: Move out of BIOS SMN pair for STB init
platform/x86/amd: pmc: Utilize SMN index 0 for driver probe
platform/x86/amd: pmc: Move idlemask check into `amd_pmc_idlemask_read`
platform/x86/amd: pmc: Don't dump data after resume from s0i3 on picasso
platform/x86/amd: pmc: Hide SMU version and program attributes for Picasso
platform/x86/amd: pmc: Don't try to read SMU version on Picasso
platform/x86/amd/pmf: Move out of BIOS SMN pair for driver probe
platform/x86: intel-uncore-freq: Add client processors
...
* Improvements
- Replace fake flexible arrays with flexible-array member.
* Misc
- Minor cleanups and fixes.
-----BEGIN PGP SIGNATURE-----
iIkEABYIADEWIQS0yQeDP3cjLyifNRUrxTEGBto89AUCZEYVphMcdHp1bmdiaUBr
ZXJuZWwub3JnAAoJECvFMQYG2jz0N34A/ROfVJ82piqtIxanFJ3EVsjsQEqGyTOQ
/vevn5p3CddSAP9zoBI/zE1aC536DRAcI/RNOj46uJ5OFjAKaHUt8RnnAg==
=ZTjw
-----END PGP SIGNATURE-----
Merge tag 'tag-chrome-platform-for-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Tzung-Bi Shih:
"Improvements:
- Replace fake flexible arrays with flexible-array member
Misc:
- Minor cleanups and fixes"
* tag 'tag-chrome-platform-for-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: wilco_ec: remove return value check of debugfs_create_dir()
platform/chrome: cros_ec_debugfs: fix kernel-doc warning
platform/chrome: cros_ec: Separate logic for getting panic info
platform/chrome: cros_typec_switch: Add missing fwnode_handle_put()
platform/chrome: cros_ec: remove unneeded label and if-condition
platform/chrome: Replace fake flexible arrays with flexible-array member
-----BEGIN PGP SIGNATURE-----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=ocor
-----END PGP SIGNATURE-----
Merge tag 'media/v6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- Removal of some old unused sensor drivers: ad9389b, m5mols, mt9m032,
mt9t001, noon010pc30, s5k6aa, sr030pc30 and vs6624
- New i.MX8 image sensor interface driver
- Some new RC keymaps
- lots of cleanups at atomisp driver to make it support standard
features present on other webcam drivers
- the cx18 and saa7146 now uses VB2
- lots of cleanups and driver improvements
* tag 'media/v6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (460 commits)
media: ov5670: Fix probe on ACPI
media: nxp: imx8-isi: Remove 300ms sleep after enabling channel
media: nxp: imx8-isi: Replace udelay() with fsleep()
media: nxp: imx8-isi: Drop partial support for i.MX8QM and i.MX8QXP
media: nxp: Add i.MX8 ISI driver
media: dt-bindings: media: Add i.MX8 ISI DT bindings
media: atomisp: gmin_platform: Add Lenovo Ideapad Miix 310 gmin_vars
media: atomisp: gmin_platform: Make DMI quirks take precedence over the _DSM table
media: atomisp: Remove struct atomisp_sub_device index field
media: atomisp: Drop support for streaming from 2 sensors at once
media: atomisp: Remove atomisp_try_fmt() call from atomisp_set_fmt()
media: atomisp: Remove unused ATOM_ISP_MAX_WIDTH_TMP and ATOM_ISP_MAX_HEIGHT_TMP
media: atomisp: Remove snr_mbus_fmt local var from atomisp_try_fmt()
media: atomisp: Remove custom V4L2_CID_FMT_AUTO control
media: atomisp: Remove continuous mode related code from atomisp_set_fmt()
media: atomisp: Remove duplicate atomisp_[start|stop]_streaming() prototypes
media: atomisp: gc0310: Switch over to ACPI powermanagement
media: atomisp: gc0310: Use devm_kzalloc() for data struct
media: atomisp: gc0310: Add runtime-pm support
media: atomisp: gc0310: Delay power-on till streaming is started
...
New drivers:
- add QAIC acceleration driver
dma-buf:
- constify kobj_type structs
- Reject prime DMA-Buf attachment if get_sg_table is missing.
fbdev:
- cmdline parser fixes
- implement fbdev emulation for GEM DMA drivers
- always use shadow buffer in fbdev emulation helpers
dma-fence:
- add deadline hint to fences
- signal private stub fence
core:
- improve DisplayID 2.0 and EDID parsing
- add gem eviction function + callback
- prep to convert shmem helper to GEM resv lock
- move suballocator from radeon/amdgpu to core for Xe
- HPD polling fixes
- Documentation improvements
- Add atomic enable_plane callback
- use tgid instead of pid for client tracking
- DP: Add SDP Error Detection Configuration Register
- Add prime import/export to vram-helper
- use pci aperture helpers in more drivers
panel:
- Radxa 8/10HD support
- Samsung AMD495QA01 support
- Elida KD50T048A
- Sony TD4353
- Novatek NT36523
- STARRY 2081101QFH032011-53G
- B133UAN01.0
- AUO NE135FBM-N41
i915:
- More MTL enabling
- fix s/r problems with MEI/PXP
- Implement fb_dirty for PSR,FBC,DRRS fixes
- Fix eDP+DSI dual panel systems
- Fix issue #6333: "list_add corruption" and full system lockup from
performance monitoring
- Don't use stolen memory or BAR for ring buffers on LLC platforms
- Make sure DSM size has correct 1MiB granularity on Gen12+
- Whitelist COMMON_SLICE_CHICKEN3 for UMD access on Gen12+
- Add engine TLB invalidation for Meteorlake
- Fix GSC races on driver load/unload on Meteorlake+
- Make kobj_type structures constant
- Move fd_install after last use of fence
- wm/vblank refactoring
- display code refactoring
- Create GSC submission targeting HDCP and PXP usages on MTL+
- Enable HDCP2.x via GSC CS
- Fix context runtime accounting on sysfs fdinfo for heavy workloads
- Use i915 instead of dev_priv insied the file_priv structure
- Replace fake flex-array with flexible-array member
amdgpu:
- Make kobj structures const
- Generalize dmabuf import to work with KFD
- Add capped/uncapped workload handling for supported APUs
- Expose additional memory stats via fdinfo
- Register vga_switcheroo for apple-gmux
- Initial NBIO7.9, GC 9.4.3, GFXHUB 1.2, MMHUB 1.8 support
- Initial DC FAM infrastructure
- Link DC backlight to connector device rather than PCI device
- Add sysfs nodes for secondary VCN clocks
amdkfd:
- Make kobj structures const
- Support for exporting buffers via dmabuf
- Multi-VMA page migration fixes
- initial GC 9.4.3 support
radeon:
- iMac fix
- convert to client based fbdev emulation
habanalabs:
- Add opcodes to the CS ioctl to allow user to stall/resume specific engines
inside Gaudi2.
- INFO ioctl the amount of device memory that the driver
and f/w reserve for themselves.
- INFO ioctl a bit-mask of the available rotator engines
- INFO ioctl the register's address of the f/w that should
be used to trigger interrupts
- INFO ioctl two new opcodes to fetch information on h/w and f/w events
- Enable graceful reset mechanism for compute-reset.
- Align to the latest firmware specs.
- Enforce the release order of the compute device and dma-buf.
msm:
- UBWC decoder programming rework
- SM8550, SM8450 bindings update
- uapi C++ fix
- a3xx and a4xx devfreq support
- GPU and GEM updates to avoid allocations which could trigger
reclaim (shrinker) in fence signaling path
- dma-fence deadline hint support and wait-boost
- a640/650 speed bin support
cirrus:
- convert to regular atomic helpers
- add damage clipping
mediatek:
- 10-bit overlay support
- mt8195 support
- Only trigger DRM HPD events if bridge is attached
- Change the aux retries times when receiving AUX_DEFER
rockchip:
- add 4K support
vc4:
- use drm_gem_objects
virtio:
- allow KMS support to be disabled
- add damage clipping
vmwgfx:
- buffer object lifetime fixes
exynos:
- move MIPI DSI driver to drm bridge for iMX sharing
- use kernel fbdev emulation
panfrost:
- add support for mali MT81xx devices
- add speed binning support
lima:
- add usage stats
tegra:
- fbdev client conversion
vkms:
- Add primary plane positioning support
-----BEGIN PGP SIGNATURE-----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=NUEy
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2023-04-24' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"There is a new Qualcomm accel driver for their QAIC, dma-fence got a
deadline feature added, lots of refactoring around fbdev emulation,
and the usual pre-release hw enablements from AMD and Intel and fixes
everywhere.
New drivers:
- add QAIC acceleration driver
dma-buf:
- constify kobj_type structs
- Reject prime DMA-Buf attachment if get_sg_table is missing.
fbdev:
- cmdline parser fixes
- implement fbdev emulation for GEM DMA drivers
- always use shadow buffer in fbdev emulation helpers
dma-fence:
- add deadline hint to fences
- signal private stub fence
core:
- improve DisplayID 2.0 and EDID parsing
- add gem eviction function + callback
- prep to convert shmem helper to GEM resv lock
- move suballocator from radeon/amdgpu to core for Xe
- HPD polling fixes
- Documentation improvements
- Add atomic enable_plane callback
- use tgid instead of pid for client tracking
- DP: Add SDP Error Detection Configuration Register
- Add prime import/export to vram-helper
- use pci aperture helpers in more drivers
panel:
- Radxa 8/10HD support
- Samsung AMD495QA01 support
- Elida KD50T048A
- Sony TD4353
- Novatek NT36523
- STARRY 2081101QFH032011-53G
- B133UAN01.0
- AUO NE135FBM-N41
i915:
- More MTL enabling
- fix s/r problems with MEI/PXP
- Implement fb_dirty for PSR,FBC,DRRS fixes
- Fix eDP+DSI dual panel systems
- Fix issue #6333: "list_add corruption" and full system lockup from
performance monitoring
- Don't use stolen memory or BAR for ring buffers on LLC platforms
- Make sure DSM size has correct 1MiB granularity on Gen12+
- Whitelist COMMON_SLICE_CHICKEN3 for UMD access on Gen12+
- Add engine TLB invalidation for Meteorlake
- Fix GSC races on driver load/unload on Meteorlake+
- Make kobj_type structures constant
- Move fd_install after last use of fence
- wm/vblank refactoring
- display code refactoring
- Create GSC submission targeting HDCP and PXP usages on MTL+
- Enable HDCP2.x via GSC CS
- Fix context runtime accounting on sysfs fdinfo for heavy workloads
- Use i915 instead of dev_priv insied the file_priv structure
- Replace fake flex-array with flexible-array member
amdgpu:
- Make kobj structures const
- Generalize dmabuf import to work with KFD
- Add capped/uncapped workload handling for supported APUs
- Expose additional memory stats via fdinfo
- Register vga_switcheroo for apple-gmux
- Initial NBIO7.9, GC 9.4.3, GFXHUB 1.2, MMHUB 1.8 support
- Initial DC FAM infrastructure
- Link DC backlight to connector device rather than PCI device
- Add sysfs nodes for secondary VCN clocks
amdkfd:
- Make kobj structures const
- Support for exporting buffers via dmabuf
- Multi-VMA page migration fixes
- initial GC 9.4.3 support
radeon:
- iMac fix
- convert to client based fbdev emulation
habanalabs:
- Add opcodes to the CS ioctl to allow user to stall/resume specific
engines inside Gaudi2.
- INFO ioctl the amount of device memory that the driver and f/w
reserve for themselves.
- INFO ioctl a bit-mask of the available rotator engines
- INFO ioctl the register's address of the f/w that should be used to
trigger interrupts
- INFO ioctl two new opcodes to fetch information on h/w and f/w
events
- Enable graceful reset mechanism for compute-reset.
- Align to the latest firmware specs.
- Enforce the release order of the compute device and dma-buf.
msm:
- UBWC decoder programming rework
- SM8550, SM8450 bindings update
- uapi C++ fix
- a3xx and a4xx devfreq support
- GPU and GEM updates to avoid allocations which could trigger
reclaim (shrinker) in fence signaling path
- dma-fence deadline hint support and wait-boost
- a640/650 speed bin support
cirrus:
- convert to regular atomic helpers
- add damage clipping
mediatek:
- 10-bit overlay support
- mt8195 support
- Only trigger DRM HPD events if bridge is attached
- Change the aux retries times when receiving AUX_DEFER
rockchip:
- add 4K support
vc4:
- use drm_gem_objects
virtio:
- allow KMS support to be disabled
- add damage clipping
vmwgfx:
- buffer object lifetime fixes
exynos:
- move MIPI DSI driver to drm bridge for iMX sharing
- use kernel fbdev emulation
panfrost:
- add support for mali MT81xx devices
- add speed binning support
lima:
- add usage stats
tegra:
- fbdev client conversion
vkms:
- Add primary plane positioning support"
* tag 'drm-next-2023-04-24' of git://anongit.freedesktop.org/drm/drm: (1495 commits)
drm/i915/dp_mst: Fix active port PLL selection for secondary MST streams
drm/exynos: Implement fbdev emulation as in-kernel client
drm/exynos: Initialize fbdev DRM client
drm/exynos: Remove fb_helper from struct exynos_drm_private
drm/exynos: Remove struct exynos_drm_fbdev
drm/exynos: Remove exynos_gem from struct exynos_drm_fbdev
drm/i915: Fix memory leaks in i915 selftests
drm/i915: Make intel_get_crtc_new_encoder() less oopsy
drm/i915/gt: Avoid out-of-bounds access when loading HuC
drm/amdgpu: add some basic elements for multiple XCD case
drm/amdgpu: move vmhub out of amdgpu_ring_funcs (v4)
Revert "drm/amdgpu: enable ras for mp0 v13_0_10 on SRIOV"
drm/amdgpu: add common ip block for GC 9.4.3
drm/amd/display: Add logging when DP link training Clock recovery is Successful
drm/amdgpu: add common early init support for GC 9.4.3
drm/amdgpu: switch to v9_4_3 gfx_funcs callbacks for GC 9.4.3
drm/amd/display: Add logging when setting DP sink power state fails
drm/amdkfd: Add gfx_target_version for GC 9.4.3
drm/amdkfd: Enable HW_UPDATE_RPTR on GC 9.4.3
drm/amdgpu: reserve the old gc_11_0_*_mes.bin
...
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEe7vIQRWZI0iWSE3xu+CwddJFiJoFAmRCSGEACgkQu+CwddJF
iJpA2wgAkwMP++Znd8JU3iQ4N53lv18euNuEMLTOY+jk7zXHvsRX8KyzLmsohUKO
SSGVi1Om785AidOsJhARJawW7AWYuJ5l7ri+FyskTwrTUcMC4UZ/IT2tB22lRsXi
0f3lgbdArZbj7aq7AVO9N7bh9rgVUHa/RHIwXzMp0sc9nekne9t+FFv7tyRnr7cc
SMp/FdMZqbt9pVf0Uwud1BpdgER7QqQaSfaxITL7D2oJTePRZVWiXerrr4hMcQl1
s6kgUgKdlaYmIx2N8eP1Nmp7undtwHo1C8dLLWKGCEuEAaXIxtXUtaUWFFmBDzH9
Fv6qswNFcfwiLNPsY+xi9iA+vlGKAg==
=T0EM
-----END PGP SIGNATURE-----
Merge tag 'slab-for-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab updates from Vlastimil Babka:
"The main change is naturally the SLOB removal. Since its deprecation
in 6.2 I've seen no complaints so hopefully SLUB_(TINY) works well for
everyone and we can proceed.
Besides the code cleanup, the main immediate benefit will be allowing
kfree() family of function to work on kmem_cache_alloc() objects,
which was incompatible with SLOB. This includes kfree_rcu() which had
no kmem_cache_free_rcu() counterpart yet and now it shouldn't be
necessary anymore.
Besides that, there are several small code and comment improvements
from Thomas, Thorsten and Vernon"
* tag 'slab-for-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
mm/slab: document kfree() as allowed for kmem_cache_alloc() objects
mm/slob: remove slob.c
mm/slab: remove CONFIG_SLOB code from slab common code
mm, pagemap: remove SLOB and SLQB from comments and documentation
mm, page_flags: remove PG_slob_free
mm/slob: remove CONFIG_SLOB
mm/slub: fix help comment of SLUB_DEBUG
mm: slub: make kobj_type structure constant
slab: Adjust comment after refactoring of gfp.h
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEESH4wyp42V4tXvYsjUqAMR0iAlPIFAmRGaygACgkQUqAMR0iA
lPKlGBAAqn0yS8E2CP16Oo8nCB5AjoPVzohh6pQ6O8G0CFhvu47EKVTHPTa1BEFE
YAz94geN5crpAmEcQyBcqkcJuLRXmYBOqE1x9M4PcCUUXTjcyYEzBYsOZO+j5jB7
LUPX6jBbm2PpbT/e1ZSr90R8MhblVfBTD7DJHmXGhibYHj5D4KOwxQnhx8uWz9aT
dgTWm1AgwEX85wUpXil5phD+YnvI/TxGlyV4AVOYh3y3K7Kc4CAeHFzCsg3h/Amr
c2RR1dzvmMcEvg8lF3U9MsnVNF/2i0Tg9BXLRxSe1c20CKhtzNNPH5krPa3vHGeP
P//FWDAd9S2hev54TN7LO92V+IsDh8nlU++HwRua50wflzJU/tkyWDtcmmlkGU6A
hqtMUWE4libAaAW7FBJomRFirmEtEA4GwXN5WH3+B6htgVwKKrKhL9U/PtQtZxZ1
GUEvtjmnBIfGndu7fHv70a1sLc9LuebOfmOQs3W6p6KUZkmL1Hqg1WGQoYwmUz4A
bZRbCwMYNJCG4iO2jDmPU27D6tWMbQdt1kZ20svP6p3PRGy8EuI1C5tnO5Jhkw3E
FCFudMMZEuZmBoztWWqEkZSfbMDlH6kc1+6+HMuCfSrpg6QD87TzO5CONIHCZyk9
f3UD04R//BubTdiKQ4y/g6OwctihX7F8i3O71hTj5etuYqPs0nI=
=t0d6
-----END PGP SIGNATURE-----
Merge tag 'printk-for-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- Code cleanup and dead code removal
* tag 'printk-for-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk: Remove obsoleted check for non-existent "user" object
lib/vsprintf: Use isodigit() for the octal number check
Remove orphaned CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT
ACPI:
* Improve error reporting when failing to manage SDEI on AGDI device
removal
Assembly routines:
* Improve register constraints so that the compiler can make use of
the zero register instead of moving an immediate #0 into a GPR
* Allow the compiler to allocate the registers used for CAS
instructions
CPU features and system registers:
* Cleanups to the way in which CPU features are identified from the
ID register fields
* Extend system register definition generation to handle Enum types
when defining shared register fields
* Generate definitions for new _EL2 registers and add new fields
for ID_AA64PFR1_EL1
* Allow SVE to be disabled separately from SME on the kernel
command-line
Tracing:
* Support for "direct calls" in ftrace, which enables BPF tracing
for arm64
Kdump:
* Don't bother unmapping the crashkernel from the linear mapping,
which then allows us to use huge (block) mappings and reduce
TLB pressure when a crashkernel is loaded.
Memory management:
* Try again to remove data cache invalidation from the coherent DMA
allocation path
* Simplify the fixmap code by mapping at page granularity
* Allow the kfence pool to be allocated early, preventing the rest
of the linear mapping from being forced to page granularity
Perf and PMU:
* Move CPU PMU code out to drivers/perf/ where it can be reused
by the 32-bit ARM architecture when running on ARMv8 CPUs
* Fix race between CPU PMU probing and pKVM host de-privilege
* Add support for Apple M2 CPU PMU
* Adjust the generic PERF_COUNT_HW_BRANCH_INSTRUCTIONS event
dynamically, depending on what the CPU actually supports
* Minor fixes and cleanups to system PMU drivers
Stack tracing:
* Use the XPACLRI instruction to strip PAC from pointers, rather
than rolling our own function in C
* Remove redundant PAC removal for toolchains that handle this in
their builtins
* Make backtracing more resilient in the face of instrumentation
Miscellaneous:
* Fix single-step with KGDB
* Remove harmless warning when 'nokaslr' is passed on the kernel
command-line
* Minor fixes and cleanups across the board
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmRChcwQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNCgBCADFvkYY9ESztSnd3EpiMbbAzgRCQBiA5H7U
F2Wc+hIWgeAeUEttSH22+F16r6Jb0gbaDvsuhtN2W/rwQhKNbCU0MaUME05MPmg2
AOp+RZb2vdT5i5S5dC6ZM6G3T6u9O78LBWv2JWBdd6RIybamEn+RL00ep2WAduH7
n1FgTbsKgnbScD2qd4K1ejZ1W/BQMwYulkNpyTsmCIijXM12lkzFlxWnMtky3uhR
POpawcIZzXvWI02QAX+SIdynGChQV3VP+dh9GuFbt7ASigDEhgunvfUYhZNSaqf4
+/q0O8toCtmQJBUhF0DEDSB5T8SOz5v9CKxKuwfaX6Trq0ixFQpZ
=78L9
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"ACPI:
- Improve error reporting when failing to manage SDEI on AGDI device
removal
Assembly routines:
- Improve register constraints so that the compiler can make use of
the zero register instead of moving an immediate #0 into a GPR
- Allow the compiler to allocate the registers used for CAS
instructions
CPU features and system registers:
- Cleanups to the way in which CPU features are identified from the
ID register fields
- Extend system register definition generation to handle Enum types
when defining shared register fields
- Generate definitions for new _EL2 registers and add new fields for
ID_AA64PFR1_EL1
- Allow SVE to be disabled separately from SME on the kernel
command-line
Tracing:
- Support for "direct calls" in ftrace, which enables BPF tracing for
arm64
Kdump:
- Don't bother unmapping the crashkernel from the linear mapping,
which then allows us to use huge (block) mappings and reduce TLB
pressure when a crashkernel is loaded.
Memory management:
- Try again to remove data cache invalidation from the coherent DMA
allocation path
- Simplify the fixmap code by mapping at page granularity
- Allow the kfence pool to be allocated early, preventing the rest of
the linear mapping from being forced to page granularity
Perf and PMU:
- Move CPU PMU code out to drivers/perf/ where it can be reused by
the 32-bit ARM architecture when running on ARMv8 CPUs
- Fix race between CPU PMU probing and pKVM host de-privilege
- Add support for Apple M2 CPU PMU
- Adjust the generic PERF_COUNT_HW_BRANCH_INSTRUCTIONS event
dynamically, depending on what the CPU actually supports
- Minor fixes and cleanups to system PMU drivers
Stack tracing:
- Use the XPACLRI instruction to strip PAC from pointers, rather than
rolling our own function in C
- Remove redundant PAC removal for toolchains that handle this in
their builtins
- Make backtracing more resilient in the face of instrumentation
Miscellaneous:
- Fix single-step with KGDB
- Remove harmless warning when 'nokaslr' is passed on the kernel
command-line
- Minor fixes and cleanups across the board"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (72 commits)
KVM: arm64: Ensure CPU PMU probes before pKVM host de-privilege
arm64: kexec: include reboot.h
arm64: delete dead code in this_cpu_set_vectors()
arm64/cpufeature: Use helper macro to specify ID register for capabilites
drivers/perf: hisi: add NULL check for name
drivers/perf: hisi: Remove redundant initialized of pmu->name
arm64/cpufeature: Consistently use symbolic constants for min_field_value
arm64/cpufeature: Pull out helper for CPUID register definitions
arm64/sysreg: Convert HFGITR_EL2 to automatic generation
ACPI: AGDI: Improve error reporting for problems during .remove()
arm64: kernel: Fix kernel warning when nokaslr is passed to commandline
perf/arm-cmn: Fix port detection for CMN-700
arm64: kgdb: Set PSTATE.SS to 1 to re-enable single-step
arm64: move PAC masks to <asm/pointer_auth.h>
arm64: use XPACLRI to strip PAC
arm64: avoid redundant PAC stripping in __builtin_return_address()
arm64/sme: Fix some comments of ARM SME
arm64/signal: Alloc tpidr2 sigframe after checking system_supports_tpidr2()
arm64/signal: Use system_supports_tpidr2() to check TPIDR2
arm64/idreg: Don't disable SME when disabling SVE
...
These are various cleanups, fixing a number of uapi header files to no
longer reference CONFIG_* symbols, and one patch that introduces the
new CONFIG_HAS_IOPORT symbol for architectures that provide working
inb()/outb() macros, as a preparation for adding driver dependencies
on those in the following release.
-----BEGIN PGP SIGNATURE-----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=H3k4
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"These are various cleanups, fixing a number of uapi header files to no
longer reference CONFIG_* symbols, and one patch that introduces the
new CONFIG_HAS_IOPORT symbol for architectures that provide working
inb()/outb() macros, as a preparation for adding driver dependencies
on those in the following release"
* tag 'asm-generic-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
Kconfig: introduce HAS_IOPORT option and select it as necessary
scripts: Update the CONFIG_* ignore list in headers_install.sh
pktcdvd: Remove CONFIG_CDROM_PKTCDVD_WCACHE from uapi header
Move bp_type_idx to include/linux/hw_breakpoint.h
Move ep_take_care_of_epollwakeup() to fs/eventpoll.c
Move COMPAT_ATM_ADDPARTY to net/atm/svc.c
The devicetree changes overall are again dominated by the Qualcomm
Snapdragon platform that weighs in at over 300 changesets, but there
are many updates across other platforms as well, notably Mediatek, NXP,
Rockchips, Renesas, TI, Samsung and ST Microelectronics. These all
add new features for existing machines, as well as new machines and
SoCs.
The newly added SoCs are:
- Allwinner T113-s, an Cortex-A7 based variant of the RISC-V
based D1 chip.
- StarFive JH7110, a RISC-V SoC based on the Sifive U74 core
like its JH7100 predecessor, but with additional CPU cores
and a GPU.
- Apple M2 as used in current Macbook Air/Pro and Mac Mini
gets added, with comparable support as its M1 predecessor.
- Unisoc UMS512 (Tiger T610) is a midrange smartphone SoC
- Qualcomm IPQ5332 and IPQ9574 are Wi-Fi 7 networking SoCs,
based on the Cortex-A53 and Cortex-A73 cores, respectively.
- Qualcomm sa8775p is an automotive SoC derived from the
Snapdragon family.
Including the initial board support for the added SoC platforms,
there are 52 new machines. The largest group are 19 boards
industrial embedded boards based on the NXP i.MX6 (32-bit)
and i.MX8 (64-bit) families.
Others include:
- Two boards based on the Allwinner f1c200s ultra-low-cost chip
- Three "Banana Pi" variants based on the Amlogic g12b
(A311D, S922X) SoC.
- The Gl.Inet mv1000 router based on Marvell Armada 3720
- A Wifi/LTE Dongle based on Qualcomm msm8916
- Two robotics boards based on Qualcomm QRB chips
- Three Snapdragon based phones made by Xiaomi
- Five developments boards based on various Rockchip SoCs,
including the rk3588s-khadas-edge2 and a few NanoPi
models
- The AM625 Beagleplay industrial SBC
Another 14 machines get removed: both boards for the obsolete "oxnas"
platform, three boards for the Renesas r8a77950 SoC that were only for
pre-production chips, and various chromebook models based on the Qualcomm
Sc7180 "trogdor" design that were never part of products.
-----BEGIN PGP SIGNATURE-----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=j12m
-----END PGP SIGNATURE-----
Merge tag 'soc-dt-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC devicetree updates from Arnd Bergmann:
"The devicetree changes overall are again dominated by the Qualcomm
Snapdragon platform that weighs in at over 300 changesets, but there
are many updates across other platforms as well, notably Mediatek,
NXP, Rockchips, Renesas, TI, Samsung and ST Microelectronics. These
all add new features for existing machines, as well as new machines
and SoCs.
The newly added SoCs are:
- Allwinner T113-s, an Cortex-A7 based variant of the RISC-V based D1
chip.
- StarFive JH7110, a RISC-V SoC based on the Sifive U74 core like its
JH7100 predecessor, but with additional CPU cores and a GPU.
- Apple M2 as used in current Macbook Air/Pro and Mac Mini gets
added, with comparable support as its M1 predecessor.
- Unisoc UMS512 (Tiger T610) is a midrange smartphone SoC
- Qualcomm IPQ5332 and IPQ9574 are Wi-Fi 7 networking SoCs, based on
the Cortex-A53 and Cortex-A73 cores, respectively.
- Qualcomm sa8775p is an automotive SoC derived from the Snapdragon
family.
Including the initial board support for the added SoC platforms, there
are 52 new machines. The largest group are 19 boards industrial
embedded boards based on the NXP i.MX6 (32-bit) and i.MX8 (64-bit)
families.
Others include:
- Two boards based on the Allwinner f1c200s ultra-low-cost chip
- Three 'Banana Pi' variants based on the Amlogic g12b (A311D, S922X)
SoC.
- The Gl.Inet mv1000 router based on Marvell Armada 3720
- A Wifi/LTE Dongle based on Qualcomm msm8916
- Two robotics boards based on Qualcomm QRB chips
- Three Snapdragon based phones made by Xiaomi
- Five developments boards based on various Rockchip SoCs, including
the rk3588s-khadas-edge2 and a few NanoPi models
- The AM625 Beagleplay industrial SBC
Another 14 machines get removed: both boards for the obsolete 'oxnas'
platform, three boards for the Renesas r8a77950 SoC that were only for
pre-production chips, and various chromebook models based on the
Qualcomm Sc7180 'trogdor' design that were never part of products"
* tag 'soc-dt-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (836 commits)
arm64: dts: rockchip: Add support for volume keys to rk3399-pinephone-pro
arm64: dts: rockchip: Add vdd_cpu_big regulators to rk3588-rock-5b
arm64: dts: rockchip: Use generic name for es8316 on Pinebook Pro and Rock 5B
arm64: dts: rockchip: Drop RTC clock-frequency on rk3588-rock-5b
arm64: dts: apple: t8112: Add PWM controller
arm64: dts: apple: t600x: Add PWM controller
arm64: dts: apple: t8103: Add PWM controller
arm64: dts: rockchip: Add pinctrl gpio-ranges for rk356x
ARM: dts: nomadik: Replace deprecated spi-gpio properties
ARM: dts: aspeed-g6: Add UDMA node
ARM: dts: aspeed: greatlakes: add mctp device
ARM: dts: aspeed: greatlakes: Add gpio names
ARM: dts: aspeed: p10bmc: Change power supply info
arm64: dts: mediatek: mt6795-xperia-m5: Add Bosch BMM050 Magnetometer
arm64: dts: mediatek: mt6795-xperia-m5: Add Bosch BMA255 Accelerometer
arm64: dts: mediatek: mt6795: Add tertiary PWM node
arm64: dts: rockchip: add panel to Anbernic RG353 series
dt-bindings: arm: Add Data Modul i.MX8M Plus eDM SBC
dt-bindings: arm: fsl: Add chargebyte Tarragon
dt-bindings: vendor-prefixes: add chargebyte
...
Most of the changes just enable additional device drivers that
were added or that are often used on major platforms.
The virtconfig added last time now disables additional drivers
to shrink kernels for virtual machines.
The obsolete oxnas_v6_defconfig file is removed in turn.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmRG4iQACgkQYKtH/8kJ
Uicdbw//aSZJUUnk/gZw5Yk5voF/QqvaR6uCIKBi9CXmrTLVJA1YNNKtzH/IpfAi
3PhbSByCXZBbdBo3Q5VGCSJCrdYsaBzImDXJNuvFkWeDg80cRMcfBvb0jdRzA/Yb
mAmrmJjcX3soI6w0HGkfh9vPKV8UnIEqgUehkHjhGgmNv01jPHewbJxP1b6oP4wi
gizpFLg7LkESkzc/3D1dipmsIrz1U7KDrH4LQgED7f0kdq34EMtUs48Fj8H3ZMh5
pVweXaqqXR00Xv48HWxN5XkdYhWdvADmLRXtD6K53APW4zyy4Gf8lGttwuH7Qco1
iULmgD/1B4y88TCZtBDzRHV+3aoBmmfkNUL4uYOZQyERMdsOhOpQcw6rtocZNoc8
Tf/tlIWLe9qj/ErDXkmluz7lsVot6SpfPJ+CTr441lvLZrn/nQrfkZ9rSwg0gfPS
QrH1E8fTFhoajSaqk0MtOfte9pGiMnFlgqcLXsRn3qegQutOZ8i/1aEjXNVZK2yb
bh4C6l76a17yiaxxKDmIxwECPjHKyDX/nmv9gi4db8shcCxpQ3PcnJ34VFASvLmb
QS601iLHILuF9vkKDcQvgNi/Rv6v5VIJsDHgsr8XWKbzaMAeQWWmKxF2Vm3RzyNw
EZoDHgV034/vBAdJHamzNzSo9UoyOijCaajeDRPuDx+/3NnkdLM=
=adFv
-----END PGP SIGNATURE-----
Merge tag 'soc-defconfig-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC defconfig updates from Arnd Bergmann:
"Most of the changes just enable additional device drivers that were
added or that are often used on major platforms.
The virtconfig added last time now disables additional drivers to
shrink kernels for virtual machines.
The obsolete oxnas_v6_defconfig file is removed in turn"
* tag 'soc-defconfig-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (33 commits)
ARM: config: Update Vexpress defconfig
arm64: defconfig: enable building the nvmem-reboot-mode module
arm64: defconfig: Enable TI ADC driver
arm64: defconfig: Enable TI TSCADC driver
arm64: defconfig: Enable security accelerator driver for TI K3 SoCs
arm64: defconfig: Enable crypto test module
ARM: multi_v7_defconfig: Add OPTEE support
ARM: configs: Update U8500 defconfig
ARM: imx_v4_v5_defconfig: Build CONFIG_IMX_SDMA as module
arm64: defconfig: Enable IPQ9574 SoC base configs
ARM: imx_v6_v7_defconfig: Enable Tarragon peripheral drivers
arm64: defconfig: Enable ARM CoreSight PMU driver
arm64: defconfig: remove duplicate TYPEC_UCSI & QCOM_PMIC_GLINK
ARM: configs: remove oxnas_v6_defconfig
arm64: defconfig: Enable audio drivers for AM62-SK
arm64: defconfig: Enable drivers for BeaglePlay
ARM: imx_v6_v7_defconfig: Select CONFIG_DRM_I2C_NXP_TDA998X
arm64: defconfig: Enable Virtio RNG driver as built in
arm64: defconfig: Enable CAN PHY transceiver driver
arm64: defconfig: add PMIC GLINK modules
...
The most notable updates this time are for Qualcomm Snapdragon platforms.
The Inline-Crypto-Engine gets a new DT binding and driver. A number of
drivers now support additional Snapdragon variants, in particular the
rsc, scm, geni, bwm, glink and socinfo, while the llcc (edac) and rpm
drivers get notable functionality updates.
Updates on other platforms include:
- Various updates to the Mediatek mutex and mmsys drivers, including
support for the Helio X10 SoC
- Support for unidirectional mailbox channels in Arm SCMI firmware
- Support for per cpu asynchronous notification in OP-TEE firmware
- Minor updates for memory controller drivers.
- Minor updates for Renesas, TI, Amlogic, Apple, Broadcom, Tegra,
Allwinner, Versatile Express, Canaan, Microchip, Mediatek and i.MX
SoC drivers, mainly updating the use of MODULE_LICENSE() macros and
obsolete DT driver interfaces.
-----BEGIN PGP SIGNATURE-----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=r6jm
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"The most notable updates this time are for Qualcomm Snapdragon
platforms. The Inline-Crypto-Engine gets a new DT binding and driver,
and a number of drivers now support additional Snapdragon variants, in
particular the rsc, scm, geni, bwm, glink and socinfo, while the llcc
(edac) and rpm drivers get notable functionality updates.
Updates on other platforms include:
- Various updates to the Mediatek mutex and mmsys drivers, including
support for the Helio X10 SoC
- Support for unidirectional mailbox channels in Arm SCMI firmware
- Support for per cpu asynchronous notification in OP-TEE firmware
- Minor updates for memory controller drivers.
- Minor updates for Renesas, TI, Amlogic, Apple, Broadcom, Tegra,
Allwinner, Versatile Express, Canaan, Microchip, Mediatek and i.MX
SoC drivers, mainly updating the use of MODULE_LICENSE() macros and
obsolete DT driver interfaces"
* tag 'soc-drivers-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits)
soc: ti: smartreflex: Simplify getting the opam_sr pointer
bus: vexpress-config: Add explicit of_platform.h include
soc: mediatek: Kconfig: Add MTK_CMDQ dependency to MTK_MMSYS
memory: mtk-smi: mt8365: Add SMI Support
dt-bindings: memory-controllers: mediatek,smi-larb: add mt8365
dt-bindings: memory-controllers: mediatek,smi-common: add mt8365
memory: tegra: read values from correct device
dt-bindings: crypto: Add Qualcomm Inline Crypto Engine
soc: qcom: Make the Qualcomm UFS/SDCC ICE a dedicated driver
dt-bindings: firmware: document Qualcomm QCM2290 SCM
soc: qcom: rpmh-rsc: Support RSC v3 minor versions
soc: qcom: smd-rpm: Use GFP_ATOMIC in write path
soc/tegra: fuse: Remove nvmem root only access
soc/tegra: cbb: tegra194: Use of_address_count() helper
soc/tegra: cbb: Remove MODULE_LICENSE in non-modules
ARM: tegra: Remove MODULE_LICENSE in non-modules
soc/tegra: flowctrl: Use devm_platform_get_and_ioremap_resource()
soc: tegra: cbb: Drop empty platform remove function
firmware: arm_scmi: Add support for unidirectional mailbox channels
dt-bindings: firmware: arm,scmi: Support mailboxes unidirectional channels
...
The Oxford Semiconductor OX810/OX820 "oxnas" platform gets retired
after the ARM11MPcore processor keeps causing problems in certain corner
cases. OX820 was the only remaining SoC with this core after CNS3xxx got
retired, and its driver support for never completely merged upstream. The
Arm "Realview" reference platform still supports ARM11MPCore in principle,
but this was never a product, and the CPU support will get cleaned up
later on.
Another series updates the mv78xx0 platform, which has been similarly
neglected for a while, but should work properly again now.
The other changes are minor cleanups across platforms, mostly converting
code to more modern interfaces for DT nodes and removing some more code
as a follow-up to the large-scale platform removal in linux-6.3.
-----BEGIN PGP SIGNATURE-----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=eKgu
-----END PGP SIGNATURE-----
Merge tag 'soc-arm-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC updates from Arnd Bergmann:
"The Oxford Semiconductor OX810/OX820 'Oxnas' platform gets retired
after the ARM11MPcore processor keeps causing problems in certain
corner cases. OX820 was the only remaining SoC with this core after
CNS3xxx got retired, and its driver support was never completely
merged upstream. The Arm 'Realview' reference platform still supports
ARM11MPCore in principle, but this was never a product, and the CPU
support will get cleaned up later on.
Another series updates the mv78xx0 platform, which has been similarly
neglected for a while, but should work properly again now.
The other changes are minor cleanups across platforms, mostly
converting code to more modern interfaces for DT nodes and removing
some more code as a follow-up to the large-scale platform removal in
linux-6.3"
* tag 'soc-arm-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (28 commits)
ARM: mv78xx0: fix entries for gpios, buttons and usb ports
ARM: mv78xx0: add code to enable XOR and CRYPTO engines on mv78xx0
ARM: mv78xx0: set the correct driver for the i2c RTC
ARM: mv78xx0: adjust init logic for ts-wxl to reflect single core dev
soc: fsl: Use of_property_present() for testing DT property presence
ARM: pxa: Use of_property_read_bool() for boolean properties
firmware: turris-mox-rwtm: make kobj_type structure constant
ARM: oxnas: remove OXNAS support
ARM: sh-mobile: Use of_cpu_node_to_id() to read CPU node 'reg'
ARM: OMAP2+: hwmod: Use kzalloc for allocating only one element
ARM: OMAP2+: Remove the unneeded result variable
ARM: OMAP2+: fix repeated words in comments
ARM: OMAP2+: remove obsolete config OMAP3_SDRC_AC_TIMING
ARM: OMAP2+: Use of_address_to_resource()
ARM: OMAP2+: Use of_property_read_bool() for boolean properties
ARM: omap1: remove redundant variables err
ARM: omap1: Kconfig: Fix indentation
ARM: bcm: Use of_address_to_resource()
ARM: mstar: remove unused config MACH_MERCURY
ARM: spear: remove obsolete config MACH_SPEAR600
...
- Fix the incorrect handling of atomic offset updates in
reserve_eilvt_offset()
The check for the return value of atomic_cmpxchg() is not compared
against the old value, it is compared against the new value, which
makes it two round on success.
Convert it to atomic_try_cmpxchg() which does the right thing.
- Handle IO/APIC less systems correctly
When IO/APIC is not advertised by ACPI then the computation of the lower
bound for dynamically allocated interrupts like MSI goes wrong.
This lower bound is used to exclude the IO/APIC legacy GSI space as that
must stay reserved for the legacy interrupts.
In case that the system, e.g. VM, does not advertise an IO/APIC the
lower bound stays at 0.
0 is an invalid interrupt number except for the legacy timer interrupt
on x86. The return value is unchecked in the core code, so it ends up
to allocate interrupt number 0 which is subsequently considered to be
invalid by the caller, e.g. the MSI allocation code.
A similar problem was already cured for device tree based systems years
ago, but that missed - or did not envision - the zero IO/APIC case.
Consolidate the zero check and return the provided "from" argument to the
core code call site, which is guaranteed to be greater than 0.
- Simplify the X2APIC cluster CPU mask logic for CPU hotplug
Per cluster CPU masks are required for X2APIC in cluster mode to
determine the correct cluster for a target CPU when calculating the
destination for IPIs
These masks are established when CPUs are borught up. The first CPU in a
cluster must allocate a new cluster CPU mask. As this happens during the
early startup of a CPU, where memory allocations cannot be done, the
mask has to be allocated by the control CPU.
The current implementation allocates a clustermask just in case and if
the to be brought up CPU is the first in a cluster the CPU takes over
this allocation from a global pointer.
This works nicely in the fully serialized CPU bringup scenario which is
used today, but would fail completely for parallel bringup of CPUs.
The cluster association of a CPU can be computed from the APIC ID which
is enumerated by ACPI/MADT.
So the cluster CPU masks can be preallocated and associated upfront and
the upcoming CPUs just need to set their corresponding bit.
Aside of preparing for parallel bringup this is a valuable
simplification on its own.
- Remove global variables which control the early startup of secondary
CPUs on 64-bit
The only information which is needed by a starting CPU is the Linux CPU
number. The CPU number allows it to retrieve the rest of the required
data from already existing per CPU storage.
So instead of initial_stack, early_gdt_desciptor and initial_gs provide
a new variable smpboot_control which contains the Linux CPU number for
now. The starting CPU can retrieve and compute all required information
for startup from there.
Aside of being a cleanup, this is also preparing for parallel CPU
bringup, where starting CPUs will look up their Linux CPU number via the
APIC ID, when smpboot_control has the corresponding control bit set.
- Make cc_vendor globally accesible
Subsequent parallel bringup changes require access to cc_vendor because
confidental computing platforms need special treatment in the early
startup phase vs. CPUID and APCI ID readouts.
The change makes cc_vendor global and provides stub accessors in case
that CONFIG_ARCH_HAS_CC_PLATFORM is not set.
This was merged from the x86/cc branch in anticipation of further
parallel bringup commits which require access to cc_vendor. Due to late
discoveries of fundamental issue with those patches these commits never
happened.
The merge commit is unfortunately in the middle of the APIC commits so
unraveling it would have required a rebase or revert. As the parallel
bringup seems to be well on its way for 6.5 this would be just pointless
churn. As the commit does not contain any functional change it's not a
risk to keep it.
-----BEGIN PGP SIGNATURE-----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=IQWG
-----END PGP SIGNATURE-----
Merge tag 'x86-apic-2023-04-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 APIC updates from Thomas Gleixner:
- Fix the incorrect handling of atomic offset updates in
reserve_eilvt_offset()
The check for the return value of atomic_cmpxchg() is not compared
against the old value, it is compared against the new value, which
makes it two round on success.
Convert it to atomic_try_cmpxchg() which does the right thing.
- Handle IO/APIC less systems correctly
When IO/APIC is not advertised by ACPI then the computation of the
lower bound for dynamically allocated interrupts like MSI goes wrong.
This lower bound is used to exclude the IO/APIC legacy GSI space as
that must stay reserved for the legacy interrupts.
In case that the system, e.g. VM, does not advertise an IO/APIC the
lower bound stays at 0.
0 is an invalid interrupt number except for the legacy timer
interrupt on x86. The return value is unchecked in the core code, so
it ends up to allocate interrupt number 0 which is subsequently
considered to be invalid by the caller, e.g. the MSI allocation code.
A similar problem was already cured for device tree based systems
years ago, but that missed - or did not envision - the zero IO/APIC
case.
Consolidate the zero check and return the provided "from" argument to
the core code call site, which is guaranteed to be greater than 0.
- Simplify the X2APIC cluster CPU mask logic for CPU hotplug
Per cluster CPU masks are required for X2APIC in cluster mode to
determine the correct cluster for a target CPU when calculating the
destination for IPIs
These masks are established when CPUs are borught up. The first CPU
in a cluster must allocate a new cluster CPU mask. As this happens
during the early startup of a CPU, where memory allocations cannot be
done, the mask has to be allocated by the control CPU.
The current implementation allocates a clustermask just in case and
if the to be brought up CPU is the first in a cluster the CPU takes
over this allocation from a global pointer.
This works nicely in the fully serialized CPU bringup scenario which
is used today, but would fail completely for parallel bringup of
CPUs.
The cluster association of a CPU can be computed from the APIC ID
which is enumerated by ACPI/MADT.
So the cluster CPU masks can be preallocated and associated upfront
and the upcoming CPUs just need to set their corresponding bit.
Aside of preparing for parallel bringup this is a valuable
simplification on its own.
- Remove global variables which control the early startup of secondary
CPUs on 64-bit
The only information which is needed by a starting CPU is the Linux
CPU number. The CPU number allows it to retrieve the rest of the
required data from already existing per CPU storage.
So instead of initial_stack, early_gdt_desciptor and initial_gs
provide a new variable smpboot_control which contains the Linux CPU
number for now. The starting CPU can retrieve and compute all
required information for startup from there.
Aside of being a cleanup, this is also preparing for parallel CPU
bringup, where starting CPUs will look up their Linux CPU number via
the APIC ID, when smpboot_control has the corresponding control bit
set.
- Make cc_vendor globally accesible
Subsequent parallel bringup changes require access to cc_vendor
because confidental computing platforms need special treatment in the
early startup phase vs. CPUID and APCI ID readouts.
The change makes cc_vendor global and provides stub accessors in case
that CONFIG_ARCH_HAS_CC_PLATFORM is not set.
This was merged from the x86/cc branch in anticipation of further
parallel bringup commits which require access to cc_vendor. Due to
late discoveries of fundamental issue with those patches these
commits never happened.
The merge commit is unfortunately in the middle of the APIC commits
so unraveling it would have required a rebase or revert. As the
parallel bringup seems to be well on its way for 6.5 this would be
just pointless churn. As the commit does not contain any functional
change it's not a risk to keep it.
* tag 'x86-apic-2023-04-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ioapic: Don't return 0 from arch_dynirq_lower_bound()
x86/apic: Fix atomic update of offset in reserve_eilvt_offset()
x86/coco: Export cc_vendor
x86/smpboot: Reference count on smpboot_setup_warm_reset_vector()
x86/smpboot: Remove initial_gs
x86/smpboot: Remove early_gdt_descr on 64-bit
x86/smpboot: Remove initial_stack on 64-bit
x86/apic/x2apic: Allow CPU cluster_mask to be populated in parallel
- Improve the VDSO build time checks to cover all dynamic relocations
VDSO does not allow dynamic relcations, but the build time check is
incomplete and fragile.
It's based on architectures specifying the relocation types to search
for and does not handle R_*_NONE relocation entries correctly.
R_*_NONE relocations are injected by some GNU ld variants if they fail
to determine the exact .rel[a]/dyn_size to cover trailing zeros.
R_*_NONE relocations must be ignored by dynamic loaders, so they
should be ignored in the build time check too.
Remove the architecture specific relocation types to check for and
validate strictly that no other relocations than R_*_NONE end up
in the VSDO .so file.
- Prefer signal delivery to the current thread for
CLOCK_PROCESS_CPUTIME_ID based posix-timers
Such timers prefer to deliver the signal to the main thread of a
process even if the context in which the timer expires is the current
task. This has the downside that it might wake up an idle thread.
As there is no requirement or guarantee that the signal has to be
delivered to the main thread, avoid this by preferring the current
task if it is part of the thread group which shares sighand.
This not only avoids waking idle threads, it also distributes the
signal delivery in case of multiple timers firing in the context
of different threads close to each other better.
- Align the tick period properly (again)
For a long time the tick was starting at CLOCK_MONOTONIC zero, which
allowed users space applications to either align with the tick or to
place a periodic computation so that it does not interfere with the
tick. The alignement of the tick period was more by chance than by
intention as the tick is set up before a high resolution clocksource is
installed, i.e. timekeeping is still tick based and the tick period
advances from there.
The early enablement of sched_clock() broke this alignement as the time
accumulated by sched_clock() is taken into account when timekeeping is
initialized. So the base value now(CLOCK_MONOTONIC) is not longer a
multiple of tick periods, which breaks applications which relied on
that behaviour.
Cure this by aligning the tick starting point to the next multiple of
tick periods, i.e 1000ms/CONFIG_HZ.
- A set of NOHZ fixes and enhancements
- Cure the concurrent writer race for idle and IO sleeptime statistics
The statitic values which are exposed via /proc/stat are updated from
the CPU local idle exit and remotely by cpufreq, but that happens
without any form of serialization. As a consequence sleeptimes can be
accounted twice or worse.
Prevent this by restricting the accumulation writeback to the CPU
local idle exit and let the remote access compute the accumulated
value.
- Protect idle/iowait sleep time with a sequence count
Reading idle/iowait sleep time, e.g. from /proc/stat, can race with
idle exit updates. As a consequence the readout may result in random
and potentially going backwards values.
Protect this by a sequence count, which fixes the idle time
statistics issue, but cannot fix the iowait time problem because
iowait time accounting races with remote wake ups decrementing the
remote runqueues nr_iowait counter. The latter is impossible to fix,
so the only way to deal with that is to document it properly and to
remove the assertion in the selftest which triggers occasionally due
to that.
- Restructure struct tick_sched for better cache layout
- Some small cleanups and a better cache layout for struct tick_sched
- Implement the missing timer_wait_running() callback for POSIX CPU timers
For unknown reason the introduction of the timer_wait_running() callback
missed to fixup posix CPU timers, which went unnoticed for almost four
years.
While initially only targeted to prevent livelocks between a timer
deletion and the timer expiry function on PREEMPT_RT enabled kernels, it
turned out that fixing this for mainline is not as trivial as just
implementing a stub similar to the hrtimer/timer callbacks.
The reason is that for CONFIG_POSIX_CPU_TIMERS_TASK_WORK enabled systems
there is a livelock issue independent of RT.
CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y moves the expiry of POSIX CPU timers
out from hard interrupt context to task work, which is handled before
returning to user space or to a VM. The expiry mechanism moves the
expired timers to a stack local list head with sighand lock held. Once
sighand is dropped the task can be preempted and a task which wants to
delete a timer will spin-wait until the expiry task is scheduled back
in. In the worst case this will end up in a livelock when the preempting
task and the expiry task are pinned on the same CPU.
The timer wheel has a timer_wait_running() mechanism for RT, which uses
a per CPU timer-base expiry lock which is held by the expiry code and the
task waiting for the timer function to complete blocks on that lock.
This does not work in the same way for posix CPU timers as there is no
timer base and expiry for process wide timers can run on any task
belonging to that process, but the concept of waiting on an expiry lock
can be used too in a slightly different way.
Add a per task mutex to struct posix_cputimers_work, let the expiry task
hold it accross the expiry function and let the deleting task which
waits for the expiry to complete block on the mutex.
In the non-contended case this results in an extra mutex_lock()/unlock()
pair on both sides.
This avoids spin-waiting on a task which is scheduled out, prevents the
livelock and cures the problem for RT and !RT systems.
-----BEGIN PGP SIGNATURE-----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=SVnj
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2023-04-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timers and timekeeping updates from Thomas Gleixner:
- Improve the VDSO build time checks to cover all dynamic relocations
VDSO does not allow dynamic relocations, but the build time check is
incomplete and fragile.
It's based on architectures specifying the relocation types to search
for and does not handle R_*_NONE relocation entries correctly.
R_*_NONE relocations are injected by some GNU ld variants if they
fail to determine the exact .rel[a]/dyn_size to cover trailing zeros.
R_*_NONE relocations must be ignored by dynamic loaders, so they
should be ignored in the build time check too.
Remove the architecture specific relocation types to check for and
validate strictly that no other relocations than R_*_NONE end up in
the VSDO .so file.
- Prefer signal delivery to the current thread for
CLOCK_PROCESS_CPUTIME_ID based posix-timers
Such timers prefer to deliver the signal to the main thread of a
process even if the context in which the timer expires is the current
task. This has the downside that it might wake up an idle thread.
As there is no requirement or guarantee that the signal has to be
delivered to the main thread, avoid this by preferring the current
task if it is part of the thread group which shares sighand.
This not only avoids waking idle threads, it also distributes the
signal delivery in case of multiple timers firing in the context of
different threads close to each other better.
- Align the tick period properly (again)
For a long time the tick was starting at CLOCK_MONOTONIC zero, which
allowed users space applications to either align with the tick or to
place a periodic computation so that it does not interfere with the
tick. The alignement of the tick period was more by chance than by
intention as the tick is set up before a high resolution clocksource
is installed, i.e. timekeeping is still tick based and the tick
period advances from there.
The early enablement of sched_clock() broke this alignement as the
time accumulated by sched_clock() is taken into account when
timekeeping is initialized. So the base value now(CLOCK_MONOTONIC) is
not longer a multiple of tick periods, which breaks applications
which relied on that behaviour.
Cure this by aligning the tick starting point to the next multiple of
tick periods, i.e 1000ms/CONFIG_HZ.
- A set of NOHZ fixes and enhancements:
* Cure the concurrent writer race for idle and IO sleeptime
statistics
The statitic values which are exposed via /proc/stat are updated
from the CPU local idle exit and remotely by cpufreq, but that
happens without any form of serialization. As a consequence
sleeptimes can be accounted twice or worse.
Prevent this by restricting the accumulation writeback to the CPU
local idle exit and let the remote access compute the accumulated
value.
* Protect idle/iowait sleep time with a sequence count
Reading idle/iowait sleep time, e.g. from /proc/stat, can race
with idle exit updates. As a consequence the readout may result
in random and potentially going backwards values.
Protect this by a sequence count, which fixes the idle time
statistics issue, but cannot fix the iowait time problem because
iowait time accounting races with remote wake ups decrementing
the remote runqueues nr_iowait counter. The latter is impossible
to fix, so the only way to deal with that is to document it
properly and to remove the assertion in the selftest which
triggers occasionally due to that.
* Restructure struct tick_sched for better cache layout
* Some small cleanups and a better cache layout for struct
tick_sched
- Implement the missing timer_wait_running() callback for POSIX CPU
timers
For unknown reason the introduction of the timer_wait_running()
callback missed to fixup posix CPU timers, which went unnoticed for
almost four years.
While initially only targeted to prevent livelocks between a timer
deletion and the timer expiry function on PREEMPT_RT enabled kernels,
it turned out that fixing this for mainline is not as trivial as just
implementing a stub similar to the hrtimer/timer callbacks.
The reason is that for CONFIG_POSIX_CPU_TIMERS_TASK_WORK enabled
systems there is a livelock issue independent of RT.
CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y moves the expiry of POSIX CPU
timers out from hard interrupt context to task work, which is handled
before returning to user space or to a VM. The expiry mechanism moves
the expired timers to a stack local list head with sighand lock held.
Once sighand is dropped the task can be preempted and a task which
wants to delete a timer will spin-wait until the expiry task is
scheduled back in. In the worst case this will end up in a livelock
when the preempting task and the expiry task are pinned on the same
CPU.
The timer wheel has a timer_wait_running() mechanism for RT, which
uses a per CPU timer-base expiry lock which is held by the expiry
code and the task waiting for the timer function to complete blocks
on that lock.
This does not work in the same way for posix CPU timers as there is
no timer base and expiry for process wide timers can run on any task
belonging to that process, but the concept of waiting on an expiry
lock can be used too in a slightly different way.
Add a per task mutex to struct posix_cputimers_work, let the expiry
task hold it accross the expiry function and let the deleting task
which waits for the expiry to complete block on the mutex.
In the non-contended case this results in an extra
mutex_lock()/unlock() pair on both sides.
This avoids spin-waiting on a task which is scheduled out, prevents
the livelock and cures the problem for RT and !RT systems
* tag 'timers-core-2023-04-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
posix-cpu-timers: Implement the missing timer_wait_running callback
selftests/proc: Assert clock_gettime(CLOCK_BOOTTIME) VS /proc/uptime monotonicity
selftests/proc: Remove idle time monotonicity assertions
MAINTAINERS: Remove stale email address
timers/nohz: Remove middle-function __tick_nohz_idle_stop_tick()
timers/nohz: Add a comment about broken iowait counter update race
timers/nohz: Protect idle/iowait sleep time under seqcount
timers/nohz: Only ever update sleeptime from idle exit
timers/nohz: Restructure and reshuffle struct tick_sched
tick/common: Align tick period with the HZ tick.
selftests/timers/posix_timers: Test delivery of signals across threads
posix-timers: Prefer delivery of signals to the current thread
vdso: Improve cmd_vdso_check to check all dynamic relocations
- Core:
- Add tracepoints for tasklet callbacks which makes it possible to
analyze individual tasklet functions instead of guess working
from the overall duration of tasklet processing
- Ensure that secondary interrupt threads have their affinity adjusted
correctly.
- Drivers:
- A large rework of the RISC-V IPI management to prepare for a new
RISC-V interrupt architecture
- Small fixes and enhancements all over the place
- Removal of support for various obsolete hardware platforms and the
related code
-----BEGIN PGP SIGNATURE-----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=EWF0
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2023-04-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull interrupt updates from Thomas Gleixner:
"Core:
- Add tracepoints for tasklet callbacks which makes it possible to
analyze individual tasklet functions instead of guess working from
the overall duration of tasklet processing
- Ensure that secondary interrupt threads have their affinity
adjusted correctly
Drivers:
- A large rework of the RISC-V IPI management to prepare for a new
RISC-V interrupt architecture
- Small fixes and enhancements all over the place
- Removal of support for various obsolete hardware platforms and the
related code"
* tag 'irq-core-2023-04-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
irqchip/st: Remove stih415/stih416 and stid127 platforms support
irqchip/gic-v3: Add Rockchip 3588001 erratum workaround
genirq: Update affinity of secondary threads
softirq: Add trace points for tasklet entry/exit
irqchip/loongson-pch-pic: Fix pch_pic_acpi_init calling
irqchip/loongson-pch-pic: Fix registration of syscore_ops
irqchip/loongson-eiointc: Fix registration of syscore_ops
irqchip/loongson-eiointc: Fix incorrect use of acpi_get_vec_parent
irqchip/loongson-eiointc: Fix returned value on parsing MADT
irqchip/riscv-intc: Add empty irq_eoi() for chained irq handlers
RISC-V: Use IPIs for remote icache flush when possible
RISC-V: Use IPIs for remote TLB flush when possible
RISC-V: Allow marking IPIs as suitable for remote FENCEs
RISC-V: Treat IPIs as normal Linux IRQs
irqchip/riscv-intc: Allow drivers to directly discover INTC hwnode
RISC-V: Clear SIP bit only when using SBI IPI operations
irqchip/irq-sifive-plic: Add syscore callbacks for hibernation
irqchip: Use of_property_read_bool() for boolean properties
irqchip/bcm-6345-l1: Request memory region
irqchip/gicv3: Workaround for NVIDIA erratum T241-FABRIC-4
...
Provide a ptrace set/get interface for syscall user dispatch. The main
purpose is to enable checkpoint/restore (CRIU) to handle processes which
utilize syscall user dispatch correctly.
-----BEGIN PGP SIGNATURE-----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=AS+6
-----END PGP SIGNATURE-----
Merge tag 'core-entry-2023-04-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core entry/ptrace update from Thomas Gleixner:
"Provide a ptrace set/get interface for syscall user dispatch. The main
purpose is to enable checkpoint/restore (CRIU) to handle processes
which utilize syscall user dispatch correctly"
* tag 'core-entry-2023-04-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
selftest, ptrace: Add selftest for syscall user dispatch config api
ptrace: Provide set/get interface for syscall user dispatch
syscall_user_dispatch: Untag selector address before access_ok()
syscall_user_dispatch: Split up set_syscall_user_dispatch()
Prevent a race vs. statically initialized objects. Such objects are
usually not initialized via an init() function. They are special cased
and detected on first use under the assumption that they are already
correctly initialized via the static initializer.
This works correctly unless there are two concurrent debug object
operations on such an object.
The first one detects that the object is not yet tracked and tries to
establish a tracking object after dropping the debug objects hash bucket
lock. The concurrent operation does the same. The one which wins the
race ends up modifying the state of the object which makes the other one
fail resulting in a bogus debug objects warning.
Prevent this by making the detection of a static object and the
allocation of a tracking object atomic under the hash bucket lock. So the
first one to acquire the hash bucket lock will succeed and the second one
will observe the correct tracking state.
This race existed forever but was only exposed when the timer wheel code
added a debug_object_assert_init() call outside of the timer base locked
region. This replaced the previous warning about timer::function being
NULL which had to be removed when the timer_shutdown() mechanics were
added.
-----BEGIN PGP SIGNATURE-----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=19cg
-----END PGP SIGNATURE-----
Merge tag 'core-debugobjects-2023-04-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core debugobjects update from Thomas Gleixner:
"A single update to debugobjects:
Prevent a race vs statically initialized objects. Such objects are
usually not initialized via an init() function. They are special cased
and detected on first use under the assumption that they are already
correctly initialized via the static initializer.
This works correctly unless there are two concurrent debug object
operations on such an object.
The first one detects that the object is not yet tracked and tries to
establish a tracking object after dropping the debug objects hash
bucket lock. The concurrent operation does the same. The one which
wins the race ends up modifying the state of the object which makes
the other one fail resulting in a bogus debug objects warning.
Prevent this by making the detection of a static object and the
allocation of a tracking object atomic under the hash bucket lock. So
the first one to acquire the hash bucket lock will succeed and the
second one will observe the correct tracking state.
This race existed forever but was only exposed when the timer wheel
code added a debug_object_assert_init() call outside of the timer base
locked region. This replaced the previous warning about
timer::function being NULL which had to be removed when the
timer_shutdown() mechanics were added"
* tag 'core-debugobjects-2023-04-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
debugobject: Prevent init race with static objects
SEV-SNP vTOM guest on Hyper-V. A vTOM guest basically splits the
address space in two parts: encrypted and unencrypted. The use case
being running unmodified guests on the Hyper-V confidential computing
hypervisor
- Double-buffer messages between the guest and the hardware PSP device
so that no partial buffers are copied back'n'forth and thus potential
message integrity and leak attacks are possible
- Name the return value the sev-guest driver returns when the hw PSP
device hasn't been called, explicitly
- Cleanups
-----BEGIN PGP SIGNATURE-----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=ZAw9
-----END PGP SIGNATURE-----
Merge tag 'x86_sev_for_v6.4_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 SEV updates from Borislav Petkov:
- Add the necessary glue so that the kernel can run as a confidential
SEV-SNP vTOM guest on Hyper-V. A vTOM guest basically splits the
address space in two parts: encrypted and unencrypted. The use case
being running unmodified guests on the Hyper-V confidential computing
hypervisor
- Double-buffer messages between the guest and the hardware PSP device
so that no partial buffers are copied back'n'forth and thus potential
message integrity and leak attacks are possible
- Name the return value the sev-guest driver returns when the hw PSP
device hasn't been called, explicitly
- Cleanups
* tag 'x86_sev_for_v6.4_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/hyperv: Change vTOM handling to use standard coco mechanisms
init: Call mem_encrypt_init() after Hyper-V hypercall init is done
x86/mm: Handle decryption/re-encryption of bss_decrypted consistently
Drivers: hv: Explicitly request decrypted in vmap_pfn() calls
x86/hyperv: Reorder code to facilitate future work
x86/ioremap: Add hypervisor callback for private MMIO mapping in coco VM
x86/sev: Change snp_guest_issue_request()'s fw_err argument
virt/coco/sev-guest: Double-buffer messages
crypto: ccp: Get rid of __sev_platform_init_locked()'s local function pointer
crypto: ccp - Name -1 return value as SEV_RET_NO_FW_CALL
-fzero-call-used-regs builds from zeroing live registers because
paravirt hides the CALLs from the compiler so latter doesn't know
there's a CALL in the first place
- Merge two paravirt callbacks into one, as their functionality is
identical
-----BEGIN PGP SIGNATURE-----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=Eu5f
-----END PGP SIGNATURE-----
Merge tag 'x86_paravirt_for_v6.4_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 paravirt updates from Borislav Petkov:
- Convert a couple of paravirt callbacks to asm to prevent
'-fzero-call-used-regs' builds from zeroing live registers because
paravirt hides the CALLs from the compiler so latter doesn't know
there's a CALL in the first place
- Merge two paravirt callbacks into one, as their functionality is
identical
* tag 'x86_paravirt_for_v6.4_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/paravirt: Convert simple paravirt functions to asm
x86/paravirt: Merge activate_mm() and dup_mmap() callbacks
involved in it can get CCed on patches
- Add some more CPUID leafs to the kcpuid tool and extend its
functionality to be more useful when grepping for CPUID bits
-----BEGIN PGP SIGNATURE-----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=hSYX
-----END PGP SIGNATURE-----
Merge tag 'x86_misc_for_v6.4_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 updates from Borislav Petkov:
- Add a x86 hw vulnerabilities section to MAINTAINERS so that the folks
involved in it can get CCed on patches
- Add some more CPUID leafs to the kcpuid tool and extend its
functionality to be more useful when grepping for CPUID bits
* tag 'x86_misc_for_v6.4_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
MAINTAINERS: Add x86 hardware vulnerabilities section
tools/x86/kcpuid: Dump the CPUID function in detailed view
tools/x86/kcpuid: Update AMD leaf Fn80000001
tools/x86/kcpuid: Fix avx512bw and avx512lvl fields in Fn00000007
- Finally use a CPUID bit for split lock detection instead of
enumerating every model
- Make sure automatic IBRS is set on AMD, even though the AP bringup
code does that now by replicating the MSR which contains the switch
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmRGiUkACgkQEsHwGGHe
VUrjgw/7BnRvmgdSJg//TwlCnbnYCHbUzPbCfnMK8W6C5OvoRR+VYxeu3DoI/dsx
xW2lMR/Svf30orB3EQTnpOBNa3PPbDlQvqInM+bQ/TYb5F6yIAnRkQhD9OaIQkeM
CwX68pPcEPXCY+Ds2RmV6K2UvzIG5vVeYg6O36FVYUvON1tHFadEAT//lAMVspOs
HBbhEOpu6/zHoKr53cduT2P9i7SAjCIjPRSMpuIfCd3RNcjwqWEXCyXxNad6LrTc
Nd+xNjUpcRecl2bR41bIrpTfGGaU2XOJI2GiFfH/mBP8WNSP4Npp3LQVI35bDwLP
VYr2IRGySxTerLSV2v8UwBSYw/hVltq5TkHyqjNaQB5JKbhxnH67GLV2LeOxawGz
OogxcPF7RrVmr/c3ji4FE/QQlTbHczIRaSjNOYupHNNcQP5NrxVHWCNZRKX8ljh1
Ah1G3s5vEVigzgqnMX8ey4xBpMtL4bilT2mMwh5hY2XMY3QjgrXLg+73VkvBkM6Y
MjreNrUoGSC7Qw39rXtUfgRBMCB16CfFSsxPS4Isu6JwlNpJzOOifVdTdE4flOrd
HR0ac776WKO9KJrPvnxYNf5mHRWkUWPS7t04BvkHuzOzxQQHz51A0xwh7td0kZA9
vozSbxKE91sH0XD73x/H/EA/TGpWwYq7DQIYJOxCu1juq1ku7lM=
=QquZ
-----END PGP SIGNATURE-----
Merge tag 'x86_cpu_for_v6.4_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpu model updates from Borislav Petkov:
- Add Emerald Rapids to the list of Intel models supporting PPIN
- Finally use a CPUID bit for split lock detection instead of
enumerating every model
- Make sure automatic IBRS is set on AMD, even though the AP bringup
code does that now by replicating the MSR which contains the switch
* tag 'x86_cpu_for_v6.4_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Add Xeon Emerald Rapids to list of CPUs that support PPIN
x86/split_lock: Enumerate architectural split lock disable bit
x86/CPU/AMD: Make sure EFER[AIBRSE] is set
an objtool fix and use proper size for a bitmap
-----BEGIN PGP SIGNATURE-----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=e2hz
-----END PGP SIGNATURE-----
Merge tag 'ras_core_for_v6.4_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RAS updates from Borislav Petkov:
- Just cleanups and fixes this time around: make threshold_ktype const,
an objtool fix and use proper size for a bitmap
* tag 'ras_core_for_v6.4_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/MCE/AMD: Use an u64 for bank_map
x86/mce: Always inline old MCA stubs
x86/MCE/AMD: Make kobj_type structure constant
- i10nm_edac: Add Sierra Forest support
- amd64_edac: Split driver code between legacy and SMCA systems. The
final goal is adding support for more hw, like GPUs
- The usual minor cleanups and fixes
-----BEGIN PGP SIGNATURE-----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=sIvA
-----END PGP SIGNATURE-----
Merge tag 'edac_updates_for_v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC updates from Borislav Petkov:
- skx_edac: Fix overflow when decoding 32G DIMM ranks
- i10nm_edac: Add Sierra Forest support
- amd64_edac: Split driver code between legacy and SMCA systems. The
final goal is adding support for more hw, like GPUs
- The usual minor cleanups and fixes
* tag 'edac_updates_for_v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: (25 commits)
EDAC/i10nm: Add Intel Sierra Forest server support
EDAC/amd64: Fix indentation in umc_determine_edac_cap()
EDAC/altera: Remove MODULE_LICENSE in non-module
EDAC: Sanitize MODULE_AUTHOR strings
EDAC/amd81[13]1: Remove trailing newline from MODULE_AUTHOR
EDAC/amd64: Add get_err_info() to pvt->ops
EDAC/amd64: Split dump_misc_regs() into dct/umc functions
EDAC/amd64: Split init_csrows() into dct/umc functions
EDAC/amd64: Split determine_edac_cap() into dct/umc functions
EDAC/amd64: Rename f17h_determine_edac_ctl_cap()
EDAC/amd64: Split setup_mci_misc_attrs() into dct/umc functions
EDAC/amd64: Split ecc_enabled() into dct/umc functions
EDAC/amd64: Split read_mc_regs() into dct/umc functions
EDAC/amd64: Split determine_memory_type() into dct/umc functions
EDAC/amd64: Split read_base_mask() into dct/umc functions
EDAC/amd64: Split prep_chip_selects() into dct/umc functions
EDAC/amd64: Rework hw_info_{get,put}
EDAC/amd64: Merge struct amd64_family_type into struct amd64_pvt
EDAC/amd64: Do not discover ECC symbol size for Family 17h and later
EDAC/amd64: Drop dbam_to_cs() for Family 17h and later
...
devm_clk_get() will return either an error or NULL, which the driver
handles, continuing to use the clock of reading the value of the
clock-frequency property.
However, the value of ov5670->xvclk is left as-is and the other clock
framework functions aren't capable of handling error values.
Use devm_clk_get_optional() to obtain NULL instead of -ENOENT.
Fixes: 8004c91e2095 ("media: i2c: ov5670: Use common clock framework")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZEYDFAAKCRBZ7Krx/gZQ
6yAwAQD0yWLTgIlyOP1Oce5NUtuxslthRu9IRtfW7bKLZuEgjAEAxG16JhlXnrT9
MV0KZqj4j/vFULbxbmsOfvPG8UBsoAM=
=u4wL
-----END PGP SIGNATURE-----
Merge tag 'pull-nios2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull trivial nios2 cleanup from Al Viro.
* tag 'pull-nios2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
nios2: _TIF_ALLWORK_MASK is unused
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZEYC7AAKCRBZ7Krx/gZQ
66NCAP9khf7D5Clz5BsUjlsYoXpBPDaSGhVnpAR8mRQ4/Y8eRQD/dyBVt0FuU72Y
j1w/foMeP3195Bfdp7UwwZLSU+hbxgw=
=M/uq
-----END PGP SIGNATURE-----
Merge tag 'pull-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull misc vfs pile from Al Viro.
Random minor cleanups.
* tag 'pull-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: Fix description of vfs_tmpfile()
sysv: switch to put_and_unmap_page()
fs/sysv: Don't round down address for kunmap_flush_on_unmap()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZEYDPAAKCRBZ7Krx/gZQ
65qvAQC60ak71gAqOSktR93GXYrQ5Q8hbpug7t3lzDQE9huGqgEAl0Zvr8d5ir3j
y0X5U5Yl6bcUSQDd4VY76C+53yIKZQs=
=rKXE
-----END PGP SIGNATURE-----
Merge tag 'pull-old-dio' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull legacy dio cleanup from Al Viro.
* tag 'pull-old-dio' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
__blockdev_direct_IO(): get rid of submit_io callback
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZEYC0gAKCRBZ7Krx/gZQ
6+N5AQCERtd5I2RLm7URX0kurwOthe7o+DX4Lj7y/mcjZV2N4gEAu9VrgHBIuLev
+KuGGY0VnKwCtcgGcGGNBrfrRjyKugs=
=gDk0
-----END PGP SIGNATURE-----
Merge tag 'pull-write-one-page' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs write_one_page removal from Al Viro:
"write_one_page series"
* tag 'pull-write-one-page' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
mm,jfs: move write_one_page/folio_write_one to jfs
ocfs2: don't use write_one_page in ocfs2_duplicate_clusters_by_page
ufs: don't flush page immediately for DIRSYNC directories
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZEYCQAAKCRBZ7Krx/gZQ
64FdAQDZ2hTDyZEWPt486dWYPYpiKyaGFXSXDGo7wgP0fiwxXQEA/mROKb6JqYw6
27mZ9A7qluT8r3AfTTQ0D+Yse/dr4AM=
=GA9W
-----END PGP SIGNATURE-----
Merge tag 'pull-fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs fget updates from Al Viro:
"fget() to fdget() conversions"
* tag 'pull-fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fuse_dev_ioctl(): switch to fdget()
cgroup_get_from_fd(): switch to fdget_raw()
bpf: switch to fdget_raw()
build_mount_idmapped(): switch to fdget()
kill the last remaining user of proc_ns_fget()
SVM-SEV: convert the rest of fget() uses to fdget() in there
convert sgx_set_attribute() to fdget()/fdput()
convert setns(2) to fdget()/fdput()
- Add sub-page block size support for uncompressed files;
- Support flattened block device for multi-blob images to be attached
into virtual machines (including cloud servers) and bare metals;
- Support long xattr name prefixes to optimize images with common
xattr namespaces (e.g. files with overlayfs xattrs) use cases;
- Various minor cleanups & fixes.
-----BEGIN PGP SIGNATURE-----
iIcEABYIAC8WIQThPAmQN9sSA0DVxtI5NzHcH7XmBAUCZETCNREceGlhbmdAa2Vy
bmVsLm9yZwAKCRA5NzHcH7XmBJCMAP9VkAPycbbqa6qWUASdyh/HGyuLJTHSfmsJ
zO4y6hBgOwD9GXg55sY8ycvcOx9ayaUt5V5f9zhs4wdGcoPhj5fWzgA=
=nUva
-----END PGP SIGNATURE-----
Merge tag 'erofs-for-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs updates from Gao Xiang:
"In this cycle, sub-page block support for uncompressed files is
available. It's mainly used to enable original signing ('golden')
4k-block images on arm64 with 16/64k pages. In addition, end users
could also use this feature to build a manifest to directly refer to
golden tar data.
Besides, long xattr name prefix support is also introduced in this
cycle to avoid too many xattrs with the same prefix (e.g. overlayfs
xattrs). It's useful for erofs + overlayfs combination (like Composefs
model): the image size is reduced by ~14% and runtime performance is
also slightly improved.
Others are random fixes and cleanups as usual.
Summary:
- Add sub-page block size support for uncompressed files
- Support flattened block device for multi-blob images to be attached
into virtual machines (including cloud servers) and bare metals
- Support long xattr name prefixes to optimize images with common
xattr namespaces (e.g. files with overlayfs xattrs) use cases
- Various minor cleanups & fixes"
* tag 'erofs-for-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: cleanup i_format-related stuffs
erofs: sunset erofs_dbg()
erofs: fix potential overflow calculating xattr_isize
erofs: get rid of z_erofs_fill_inode()
erofs: enable long extended attribute name prefixes
erofs: handle long xattr name prefixes properly
erofs: add helpers to load long xattr name prefixes
erofs: introduce on-disk format for long xattr name prefixes
erofs: move packed inode out of the compression part
erofs: keep meta inode into erofs_buf
erofs: initialize packed inode after root inode is assigned
erofs: stop parsing non-compact HEAD index if clusterofs is invalid
erofs: don't warn ztailpacking feature anymore
erofs: simplify erofs_xattr_generic_get()
erofs: rename init_inode_xattrs with erofs_ prefix
erofs: move several xattr helpers into xattr.c
erofs: tidy up EROFS on-disk naming
erofs: support flattened block device for multi-blob images
erofs: set block size to the on-disk block size
erofs: avoid hardcoded blocksize for subpage block support
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZEEn8AAKCRCRxhvAZXjc
okJoAQC1bjJp4SQw7VQhTuyv0Ak67PACwKPNUPQyHcqMV5s5DAD/fcnMjq7+UieH
TEk/zRBGWWI8m0wb51MMO+VVM2GeXwI=
=EKj/
-----END PGP SIGNATURE-----
Merge tag 'v6.4/vfs.open' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs open fixlet from Christian Brauner:
"EINVAL ist keinmal: This contains the changes to make O_DIRECTORY when
specified together with O_CREAT an invalid request.
The wider background is that a regression report about the behavior of
O_DIRECTORY | O_CREAT was sent to fsdevel about a behavior that was
changed multiple years and LTS releases earlier during v5.7
development.
This has also been covered in
https://lwn.net/Articles/926782/
which provides an excellent summary of the discussion"
* tag 'v6.4/vfs.open' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
open: return EINVAL for O_DIRECTORY | O_CREAT
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZEJxiQAKCRCRxhvAZXjc
oj4jAP4pt/SuHdZQzv9k2j+UA4hpDmwt7UUWhLxtycQrt9oEoQD/U9hCwnYY9Ksj
5TSZiK/OGyoslmF1zfAC+1R2crgr3A0=
=PpBS
-----END PGP SIGNATURE-----
Merge tag 'v6.4/vfs.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"This contains a pile of various smaller fixes. Most of them aren't
very interesting so this just highlights things worth mentioning:
- Various filesystems contained the same little helper to convert
from the mode of a dentry to the DT_* type of that dentry.
They have now all been switched to rely on the generic
fs_umode_to_dtype() helper. All custom helpers are removed (Jeff)
- Fsnotify now reports ACCESS and MODIFY events for splice
(Chung-Chiang Cheng)
- After converting timerfd a long time ago to rely on
wait_event_interruptible_*() apis, convert eventfd as well. This
removes the complex open-coded wait code (Wen Yang)
- Simplify sysctl registration for devpts, avoiding the declaration
of two tables. Instead, just use a prefixed path with
register_sysctl() (Luis)
- The setattr_should_drop_sgid() helper is now exported so NFS can
use it. By switching NFS to this helper an NFS setgid inheritance
bug is fixed (me)"
* tag 'v6.4/vfs.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: hfsplus: remove WARN_ON() from hfsplus_cat_{read,write}_inode()
pnode: pass mountpoint directly
eventfd: use wait_event_interruptible_locked_irq() helper
splice: report related fsnotify events
fs: consolidate duplicate dt_type helpers
nfs: use vfs setgid helper
Update relatime comments to include equality
fs/buffer: Remove redundant assignment to err
fs_context: drop the unused lsm_flags member
fs/namespace: fnic: Switch to use %ptTd
Documentation: update idmappings.rst
devpts: simplify two-level sysctl registration for pty_kern_table
eventpoll: align comment with nested epoll limitation
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZEEhwgAKCRCRxhvAZXjc
otwgAQDXHnKiPm/d76lITXbxdUNCtvZz+ig26EbOrD+vEszzIQEA81dru0QbCNCt
ctoZdcsmtKbt2VaYQF1CDOhlnNg5VQM=
=pER1
-----END PGP SIGNATURE-----
Merge tag 'v6.4/vfs.acl' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull acl updates from Christian Brauner:
"After finishing the introduction of the new posix acl api last cycle
the generic POSIX ACL xattr handlers are still around in the
filesystems xattr handlers for two reasons:
(1) Because a few filesystems rely on the ->list() method of the
generic POSIX ACL xattr handlers in their ->listxattr() inode
operation.
(2) POSIX ACLs are only available if IOP_XATTR is raised. The
IOP_XATTR flag is raised in inode_init_always() based on whether
the sb->s_xattr pointer is non-NULL. IOW, the registered xattr
handlers of the filesystem are used to raise IOP_XATTR. Removing
the generic POSIX ACL xattr handlers from all filesystems would
risk regressing filesystems that only implement POSIX ACL support
and no other xattrs (nfs3 comes to mind).
This contains the work to decouple POSIX ACLs from the IOP_XATTR flag
as they don't depend on xattr handlers anymore. So it's now possible
to remove the generic POSIX ACL xattr handlers from the sb->s_xattr
list of all filesystems. This is a crucial step as the generic POSIX
ACL xattr handlers aren't used for POSIX ACLs anymore and POSIX ACLs
don't depend on the xattr infrastructure anymore.
Adressing problem (1) will require more long-term work. It would be
best to get rid of the ->list() method of xattr handlers completely at
some point.
For erofs, ext{2,4}, f2fs, jffs2, ocfs2, and reiserfs the nop POSIX
ACL xattr handler is kept around so they can continue to use
array-based xattr handler indexing.
This update does simplify the ->listxattr() implementation of all
these filesystems however"
* tag 'v6.4/vfs.acl' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
acl: don't depend on IOP_XATTR
ovl: check for ->listxattr() support
reiserfs: rework priv inode handling
fs: rename generic posix acl handlers
reiserfs: rework ->listxattr() implementation
fs: simplify ->listxattr() implementation
fs: drop unused posix acl handlers
xattr: remove unused argument
xattr: add listxattr helper
xattr: simplify listxattr helpers
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZEEt8gAKCRCRxhvAZXjc
oppuAQDu9kwAQWAl0KzlpjQkrEDAEuyHRy6SCpo1kPPD5f3rigD+INZb3fi2QXmK
ZL/c6XtII9ah/8i2zfzAgH9Q2ZZu0gk=
=xcAX
-----END PGP SIGNATURE-----
Merge tag 'v6.4/pidfd.file' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull pidfd updates from Christian Brauner:
"This adds a new pidfd_prepare() helper which allows the caller to
reserve a pidfd number and allocates a new pidfd file that stashes the
provided struct pid.
It should be avoided installing a file descriptor into a task's file
descriptor table just to close it again via close_fd() in case an
error occurs. The fd has been visible to userspace and might already
be in use. Instead, a file descriptor should be reserved but not
installed into the caller's file descriptor table.
If another failure path is hit then the reserved file descriptor and
file can just be put without any userspace visible side-effects. And
if all failure paths are cleared the file descriptor and file can be
installed into the task's file descriptor table.
This helper is now used in all places that open coded this
functionality before. For example, this is currently done during
copy_process() and fanotify used pidfd_create(), which returns a pidfd
that has already been made visibile in the caller's file descriptor
table, but then closed it using close_fd().
In one of the next merge windows there is also new functionality
coming to unix domain sockets that will have to rely on
pidfd_prepare()"
* tag 'v6.4/pidfd.file' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
fanotify: use pidfd_prepare()
fork: use pidfd_prepare()
pid: add pidfd_prepare()
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZEEvmQAKCRCRxhvAZXjc
omUmAP0YaHa0gGgC1HEqZUpr0wRCo9WCyDCIZh3CYHUsgSwtvAD/Skl3jeWPPhlm
pmRA2DDxmwYFP3vhhFMjP+Z6AuUpEQQ=
=9XpZ
-----END PGP SIGNATURE-----
Merge tag 'v6.4/kernel.user_worker' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull user work thread updates from Christian Brauner:
"This contains the work generalizing the ability to create a kernel
worker from a userspace process.
Such user workers will run with the same credentials as the userspace
process they were created from providing stronger security and
accounting guarantees than the traditional override_creds() approach
ever could've hoped for.
The original work was heavily based and optimzed for the needs of
io_uring which was the first user. However, as it quickly turned out
the ability to create user workers inherting properties from a
userspace process is generally useful.
The vhost subsystem currently creates workers using the kthread api.
The consequences of using the kthread api are that RLIMITs don't work
correctly as they are inherited from khtreadd. This leads to bugs
where more workers are created than would be allowed by the RLIMITs of
the userspace process in lieu of which workers are created.
Problems like this disappear with user workers created from the
userspace processes for which they perform the work. In addition,
providing this api allows vhost to remove additional complexity. For
example, cgroup and mm sharing will just work out of the box with user
workers based on the relevant userspace process instead of manually
ensuring the correct cgroup and mm contexts are used.
So the vhost subsystem should simply be made to use the same mechanism
as io_uring. To this end the original mechanism used for
create_io_thread() is generalized into user workers:
- Introduce PF_USER_WORKER as a generic indicator that a given task
is a user worker, i.e., a kernel task that was created from a
userspace process. Now a PF_IO_WORKER thread is just a specialized
version of PF_USER_WORKER. So io_uring io workers raise both flags.
- Make copy_process() available to core kernel code
- Extend struct kernel_clone_args with the following bitfields
allowing to indicate to copy_process():
- to create a user worker (raise PF_USER_WORKER)
- to not inherit any files from the userspace process
- to ignore signals
After all generic changes are in place the vhost subsystem implements
a new dedicated vhost api based on user workers. Finally, vhost is
switched to rely on the new api moving it off of kthreads.
Thanks to Mike for sticking it out and making it through this rather
arduous journey"
* tag 'v6.4/kernel.user_worker' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
vhost: use vhost_tasks for worker threads
vhost: move worker thread fields to new struct
vhost_task: Allow vhost layer to use copy_process
fork: allow kernel code to call copy_process
fork: Add kernel_clone_args flag to ignore signals
fork: add kernel_clone_args flag to not dup/clone files
fork/vm: Move common PF_IO_WORKER behavior to new flag
kernel: Make io_thread and kthread bit fields
kthread: Pass in the thread's name during creation
kernel: Allow a kernel thread's name to be set in copy_process
csky: Remove kernel_thread declaration
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZEEuiAAKCRCRxhvAZXjc
otFNAP4iesF3tqrzb1JLf/vKg8PT98re0Iec5tGYyfDSCjfGYAEAraeFOSry16sy
VUn6JBjDwrkAbUeraz6zauS+rXwstQk=
=xYmX
-----END PGP SIGNATURE-----
Merge tag 'v6.4/kernel.clone3.tests' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull clone3 selftest fix from Christian Brauner:
"This is a single fix to the clone3() selftstests.
It fell through the sefltest tree cracks a few times so I'll provide
it here. It has low urgency but we should still correctly report the
number of tests"
* tag 'v6.4/kernel.clone3.tests' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
selftests/clone3: fix number of tests in ksft_set_plan
still a fair amount going on, including:
- Reorganizing the architecture-specific documentation under
Documentation/arch. This makes the structure match the source directory
and helps to clean up the mess that is the top-level Documentation
directory a bit. This work creates the new directory and moves x86 and
most of the less-active architectures there. The current plan is to move
the rest of the architectures in 6.5, with the patches going through the
appropriate subsystem trees.
- Some more Spanish translations and maintenance of the Italian
translation.
- A new "Kernel contribution maturity model" document from Ted.
- A new tutorial on quickly building a trimmed kernel from Thorsten.
Plus the usual set of updates and fixes.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmRGze0PHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5Y/VsH/RyWqinorRVFZmHqRJMRhR0j7hE2pAgK5prE
dGXYVtHHNQ+25thNaqhZTOLYFbSX6ii2NG7sLRXmyOTGIZrhUCFFXCHkuq4ZUypR
gJpMUiKQVT4dhln3gIZ0k09NSr60gz8UTcq895N9UFpUdY1SCDhbCcLc4uXTRajq
NrdgFaHWRkPb+gBRbXOExYm75DmCC6Ny5AyGo2rXfItV//ETjWIJVQpJhlxKrpMZ
3LgpdYSLhEFFnFGnXJ+EAPJ7gXDi2Tg5DuPbkvJyFOTouF3j4h8lSS9l+refMljN
xNRessv+boge/JAQidS6u8F2m2ESSqSxisv/0irgtKIMJwXaoX4=
=1//8
-----END PGP SIGNATURE-----
Merge tag 'docs-6.4' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"Commit volume in documentation is relatively low this time, but there
is still a fair amount going on, including:
- Reorganize the architecture-specific documentation under
Documentation/arch
This makes the structure match the source directory and helps to
clean up the mess that is the top-level Documentation directory a
bit. This work creates the new directory and moves x86 and most of
the less-active architectures there.
The current plan is to move the rest of the architectures in 6.5,
with the patches going through the appropriate subsystem trees.
- Some more Spanish translations and maintenance of the Italian
translation
- A new "Kernel contribution maturity model" document from Ted
- A new tutorial on quickly building a trimmed kernel from Thorsten
Plus the usual set of updates and fixes"
* tag 'docs-6.4' of git://git.lwn.net/linux: (47 commits)
media: Adjust column width for pdfdocs
media: Fix building pdfdocs
docs: clk: add documentation to log which clocks have been disabled
docs: trace: Fix typo in ftrace.rst
Documentation/process: always CC responsible lists
docs: kmemleak: adjust to config renaming
ELF: document some de-facto PT_* ABI quirks
Documentation: arm: remove stih415/stih416 related entries
docs: turn off "smart quotes" in the HTML build
Documentation: firmware: Clarify firmware path usage
docs/mm: Physical Memory: Fix grammar
Documentation: Add document for false sharing
dma-api-howto: typo fix
docs: move m68k architecture documentation under Documentation/arch/
docs: move parisc documentation under Documentation/arch/
docs: move ia64 architecture docs under Documentation/arch/
docs: Move arc architecture docs under Documentation/arch/
docs: move nios2 documentation under Documentation/arch/
docs: move openrisc documentation under Documentation/arch/
docs: move superh documentation under Documentation/arch/
...
This KUnit update Linux 6.4-rc1 consists of:
- several fixes to kunit tool
- new klist structure test
- support for m68k under QEMU
- support for overriding the QEMU serial port
- support for SH under QEMU
-----BEGIN PGP SIGNATURE-----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=COQn
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-kunit-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit updates from Shuah Khan:
- several fixes to kunit tool
- new klist structure test
- support for m68k under QEMU
- support for overriding the QEMU serial port
- support for SH under QEMU
* tag 'linux-kselftest-kunit-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: add tests for using current KUnit test field
kunit: tool: Add support for SH under QEMU
kunit: tool: Add support for overriding the QEMU serial port
.gitignore: Unignore .kunitconfig
list: test: Test the klist structure
kunit: increase KUNIT_LOG_SIZE to 2048 bytes
kunit: Use gfp in kunit_alloc_resource() kernel-doc
kunit: tool: fix pre-existing `mypy --strict` errors and update run_checks.py
kunit: tool: remove unused imports and variables
kunit: tool: add subscripts for type annotations where appropriate
kunit: fix bug of extra newline characters in debugfs logs
kunit: fix bug in the order of lines in debugfs logs
kunit: fix bug in debugfs logs of parameterized tests
kunit: tool: Add support for m68k under QEMU
linux-kselftest-next-6.4-rc1
This Kselftest update for Linux 6.4-rc1 consists of:
- several patches to enhance and fix resctrl test
- nolibc support for kselftest with an addition to vprintf() to
tools/nolibc/stdio and related test changes
- Refactor 'peeksiginfo' ptrace test part
- add 'malloc' failures checks in cgroup test_memcontrol
- a new prctl test
- enhancements sched test with additional ore schedule prctl calls
-----BEGIN PGP SIGNATURE-----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=992w
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-next-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest updates from Shuah Khan:
- several patches to enhance and fix resctrl test
- nolibc support for kselftest with an addition to vprintf() to
tools/nolibc/stdio and related test changes
- Refactor 'peeksiginfo' ptrace test part
- add 'malloc' failures checks in cgroup test_memcontrol
- a new prctl test
- enhancements sched test with additional ore schedule prctl calls
* tag 'linux-kselftest-next-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (25 commits)
selftests/resctrl: Fix incorrect error return on test complete
selftests/resctrl: Remove duplicate codes that clear each test result file
selftests/resctrl: Commonize the signal handler register/unregister for all tests
selftests/resctrl: Cleanup properly when an error occurs in CAT test
selftests/resctrl: Flush stdout file buffer before executing fork()
selftests/resctrl: Return MBA check result and make it to output message
selftests/resctrl: Fix set up schemata with 100% allocation on first run in MBM test
selftests/resctrl: Use correct exit code when tests fail
kselftest/arm64: Convert za-fork to use kselftest.h
kselftest: Support nolibc
tools/nolibc/stdio: Implement vprintf()
selftests/resctrl: Correct get_llc_perf() param in function comment
selftests/resctrl: Use remount_resctrlfs() consistently with boolean
selftests/resctrl: Change name from CBM_MASK_PATH to INFO_PATH
selftests/resctrl: Change initialize_llc_perf() return type to void
selftests/resctrl: Replace obsolete memalign() with posix_memalign()
selftests/resctrl: Check for return value after write_schemata()
selftests/resctrl: Allow ->setup() to return errors
selftests/resctrl: Move ->setup() call outside of test specific branches
selftests/resctrl: Return NULL if malloc_and_init_memory() did not alloc mem
...
o MAINTAINERS files additions and changes.
o Fix hotplug warning in nohz code.
o Tick dependency changes by Zqiang.
o Lazy-RCU shrinker fixes by Zqiang.
o rcu-tasks stall reporting improvements by Neeraj.
o Initial changes for renaming of k[v]free_rcu() to its new k[v]free_rcu_mightsleep()
name for robustness.
o Documentation Updates:
o Significant changes to srcu_struct size.
o Deadlock detection for srcu_read_lock() vs synchronize_srcu() from Boqun.
o rcutorture and rcu-related tool, which are targeted for v6.4 from Boqun's tree.
o Other misc changes.
-----BEGIN PGP SIGNATURE-----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=Rgbj
-----END PGP SIGNATURE-----
Merge tag 'rcu.6.4.april5.2023.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jfern/linux
Pull RCU updates from Joel Fernandes:
- Updates and additions to MAINTAINERS files, with Boqun being added to
the RCU entry and Zqiang being added as an RCU reviewer.
I have also transitioned from reviewer to maintainer; however, Paul
will be taking over sending RCU pull-requests for the next merge
window.
- Resolution of hotplug warning in nohz code, achieved by fixing
cpu_is_hotpluggable() through interaction with the nohz subsystem.
Tick dependency modifications by Zqiang, focusing on fixing usage of
the TICK_DEP_BIT_RCU_EXP bitmask.
- Avoid needless calls to the rcu-lazy shrinker for CONFIG_RCU_LAZY=n
kernels, fixed by Zqiang.
- Improvements to rcu-tasks stall reporting by Neeraj.
- Initial renaming of k[v]free_rcu() to k[v]free_rcu_mightsleep() for
increased robustness, affecting several components like mac802154,
drbd, vmw_vmci, tracing, and more.
A report by Eric Dumazet showed that the API could be unknowingly
used in an atomic context, so we'd rather make sure they know what
they're asking for by being explicit:
https://lore.kernel.org/all/20221202052847.2623997-1-edumazet@google.com/
- Documentation updates, including corrections to spelling,
clarifications in comments, and improvements to the srcu_size_state
comments.
- Better srcu_struct cache locality for readers, by adjusting the size
of srcu_struct in support of SRCU usage by Christoph Hellwig.
- Teach lockdep to detect deadlocks between srcu_read_lock() vs
synchronize_srcu() contributed by Boqun.
Previously lockdep could not detect such deadlocks, now it can.
- Integration of rcutorture and rcu-related tools, targeted for v6.4
from Boqun's tree, featuring new SRCU deadlock scenarios, test_nmis
module parameter, and more
- Miscellaneous changes, various code cleanups and comment improvements
* tag 'rcu.6.4.april5.2023.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jfern/linux: (71 commits)
checkpatch: Error out if deprecated RCU API used
mac802154: Rename kfree_rcu() to kvfree_rcu_mightsleep()
rcuscale: Rename kfree_rcu() to kfree_rcu_mightsleep()
ext4/super: Rename kfree_rcu() to kfree_rcu_mightsleep()
net/mlx5: Rename kfree_rcu() to kfree_rcu_mightsleep()
net/sysctl: Rename kvfree_rcu() to kvfree_rcu_mightsleep()
lib/test_vmalloc.c: Rename kvfree_rcu() to kvfree_rcu_mightsleep()
tracing: Rename kvfree_rcu() to kvfree_rcu_mightsleep()
misc: vmw_vmci: Rename kvfree_rcu() to kvfree_rcu_mightsleep()
drbd: Rename kvfree_rcu() to kvfree_rcu_mightsleep()
rcu: Protect rcu_print_task_exp_stall() ->exp_tasks access
rcu: Avoid stack overflow due to __rcu_irq_enter_check_tick() being kprobe-ed
rcu-tasks: Report stalls during synchronize_srcu() in rcu_tasks_postscan()
rcu: Permit start_poll_synchronize_rcu_expedited() to be invoked early
rcu: Remove never-set needwake assignment from rcu_report_qs_rdp()
rcu: Register rcu-lazy shrinker only for CONFIG_RCU_LAZY=y kernels
rcu: Fix missing TICK_DEP_MASK_RCU_EXP dependency check
rcu: Fix set/clear TICK_DEP_BIT_RCU_EXP bitmask race
rcu/trace: use strscpy() to instead of strncpy()
tick/nohz: Fix cpu_is_hotpluggable() by checking with nohz subsystem
...
o Add support for loongarch.
o Fix stack-protector issues.
o Support additional integral types and signal-related macros.
o Add support for stdin, stdout, and stderr.
o Add getuid() and geteuid().
o Allow S_I* macros to be overridden by program.
o Defer to linux/fcntl.h and linux/stat.h to avoid duplicate
definitions.
o Many improvements to the self tests.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEbK7UrM+RBIrCoViJnr8S83LZ+4wFAmQsjLUTHHBhdWxtY2tA
a2VybmVsLm9yZwAKCRCevxLzctn7jKuOD/9Y18ncS7+K7D9m89h5zwqBoPeNdP65
fC/kSgBeLreqO9hR7fsDegPk/pC8ZcMZj7iiLMV8dQIan0N74Hcd4mnL+Nf9LdkP
KpwMfN/DG7h+p69Ug4d6qQqSr7jwEGa1NE280NguNtugs+kanSayVoSh0lhWPp7K
5t9s4oITOQNa69EgluB25b1qbaY36DibsBbt7vO2b/Rsmbw13UdgXQxKBQTgEOmQ
yfNqjSYatRrl7pQQiQQDwV8xzd84jNLgNKsTDtG18kUWqYBhleMDQxt54betRFZ2
O3SNylt7pJKVFsgjAB90TcOl4SRmzXJ0+jNLIuNYJkqlQaPjQy29N4nBBUp2ciBf
sSkL4OBfaegJlnBWZ4LwyV+ZTPLGQ5PZ78EhfqMpQzVbEibL5Es/pPAVuUxLVK4B
U03+sh4IAr2aK4aXcxXgDWYr/HmKP6DWrlp/oH679sW1e2mUpnjghOfuGMYwLifo
d+a/M2VH8++KOV/0aZf/Z4p1Jbexn6/jz4pW7DTfiARduUtlaN5F69oAr85q5vrS
T1dZ84ZjmxrWJUYEJjfs5DM+fvPzsOyho8ae9TRlxnJJtW6UOZ0TTUo+mUDfgqWQ
OU6XteK6zTQmE5H9aVOVwO/jl0uXWzmHAoJTAynpPgEkP01I+t6Vx8e1PAK/oPbT
fJdUIEFiMo1qMg==
=BS2x
-----END PGP SIGNATURE-----
Merge tag 'nolibc.2023.04.04a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull nolibc updates from Paul McKenney:
- Add support for loongarch
- Fix stack-protector issues
- Support additional integral types and signal-related macros
- Add support for stdin, stdout, and stderr
- Add getuid() and geteuid()
- Allow S_I* macros to be overridden by program
- Defer to linux/fcntl.h and linux/stat.h to avoid duplicate
definitions
- Many improvements to the selftests
* tag 'nolibc.2023.04.04a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (22 commits)
tools/nolibc: x86_64: add stackprotector support
tools/nolibc: i386: add stackprotector support
tools/nolibc: tests: add test for -fstack-protector
tools/nolibc: tests: fold in no-stack-protector cflags
tools/nolibc: add support for stack protector
tools/nolibc: tests: constify test_names
tools/nolibc: add helpers for wait() signal exits
tools/nolibc: add definitions for standard fds
selftests/nolibc: Adjust indentation for Makefile
selftests/nolibc: Add support for LoongArch
tools/nolibc: Add support for LoongArch
tools/nolibc: Add statx() and make stat() rely on statx() if necessary
tools/nolibc: Include linux/fcntl.h and remove duplicate code
tools/nolibc: check for S_I* macros before defining them
selftests/nolibc: skip the chroot_root and link_dir tests when not privileged
tools/nolibc: add getuid() and geteuid()
tools/nolibc: add tests for the integer limits in stdint.h
tools/nolibc: enlarge column width of tests
tools/nolibc: add integer types and integer limit macros
tools/nolibc: add stdint.h
...
This update adds tests for nested locking and also adds support for
testing raw spinlocks in PREEMPT_RT kernels.
-----BEGIN PGP SIGNATURE-----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=QAhX
-----END PGP SIGNATURE-----
Merge tag 'locktorture.2023.04.04a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull locktorture updates from Paul McKenney:
"This adds tests for nested locking and also adds support for testing
raw spinlocks in PREEMPT_RT kernels"
* tag 'locktorture.2023.04.04a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
locktorture: Add raw_spinlock* torture tests for PREEMPT_RT kernels
locktorture: With nested locks, occasionally skip main lock
locktorture: Add nested locking to rtmutex torture tests
locktorture: Add nested locking to mutex torture tests
locktorture: Add nested_[un]lock() hooks and nlocks parameter
Linus Torvalds
Sakari Ailus