IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
[ Upstream commit bc2e07dfd2c49aaa4b52302cf7b55cf94e025f79 ]
Fix the cmdline parsing of the "blkdevparts=" parameter using strsep(),
which makes the code simpler.
Before commit 146afeb235cc ("block: use strscpy() to instead of
strncpy()"), we used a strncpy() to copy a block device name and partition
names. The commit simply replaced a strncpy() and NULL termination with
a strscpy(). It did not update calculations of length passed to strscpy().
While the length passed to strncpy() is just a length of valid characters
without NULL termination ('\0'), strscpy() takes it as a length of the
destination buffer, including a NULL termination.
Since the source buffer is not necessarily NULL terminated, the current
code copies "length - 1" characters and puts a NULL character in the
destination buffer. It replaces the last character with NULL and breaks
the parsing.
As an example, that buffer will be passed to parse_parts() and breaks
parsing sub-partitions due to the missing ')' at the end, like the
following.
example (Check Point V-80 & OpenWrt):
- Linux Kernel 6.6
[ 0.000000] Kernel command line: console=ttyS0,115200 earlycon=uart8250,mmio32,0xf0512000 crashkernel=30M mvpp2x.queue_mode=1 blkdevparts=mmcblk1:48M@10M(kernel-1),1M(dtb-1),720M(rootfs-1),48M(kernel-2),1M(dtb-2),720M(rootfs-2),300M(default_sw),650M(logs),1M(preset_cfg),1M(adsl),-(storage) maxcpus=4
...
[ 0.884016] mmc1: new HS200 MMC card at address 0001
[ 0.889951] mmcblk1: mmc1:0001 004GA0 3.69 GiB
[ 0.895043] cmdline partition format is invalid.
[ 0.895704] mmcblk1: p1
[ 0.903447] mmcblk1boot0: mmc1:0001 004GA0 2.00 MiB
[ 0.908667] mmcblk1boot1: mmc1:0001 004GA0 2.00 MiB
[ 0.913765] mmcblk1rpmb: mmc1:0001 004GA0 512 KiB, chardev (248:0)
1. "48M@10M(kernel-1),..." is passed to strscpy() with length=17
from parse_parts()
2. strscpy() returns -E2BIG and the destination buffer has
"48M@10M(kernel-1\0"
3. "48M@10M(kernel-1\0" is passed to parse_subpart()
4. parse_subpart() fails to find ')' when parsing a partition name,
and returns error
- Linux Kernel 6.1
[ 0.000000] Kernel command line: console=ttyS0,115200 earlycon=uart8250,mmio32,0xf0512000 crashkernel=30M mvpp2x.queue_mode=1 blkdevparts=mmcblk1:48M@10M(kernel-1),1M(dtb-1),720M(rootfs-1),48M(kernel-2),1M(dtb-2),720M(rootfs-2),300M(default_sw),650M(logs),1M(preset_cfg),1M(adsl),-(storage) maxcpus=4
...
[ 0.953142] mmc1: new HS200 MMC card at address 0001
[ 0.959114] mmcblk1: mmc1:0001 004GA0 3.69 GiB
[ 0.964259] mmcblk1: p1(kernel-1) p2(dtb-1) p3(rootfs-1) p4(kernel-2) p5(dtb-2) 6(rootfs-2) p7(default_sw) p8(logs) p9(preset_cfg) p10(adsl) p11(storage)
[ 0.979174] mmcblk1boot0: mmc1:0001 004GA0 2.00 MiB
[ 0.984674] mmcblk1boot1: mmc1:0001 004GA0 2.00 MiB
[ 0.989926] mmcblk1rpmb: mmc1:0001 004GA0 512 KiB, chardev (248:0
By the way, strscpy() takes a length of destination buffer and it is
often confusing when copying characters with a specified length. Using
strsep() helps to separate the string by the specified character. Then,
we can use strscpy() naturally with the size of the destination buffer.
Separating the string on the fly is also useful to omit the redundant
string copy, reducing memory usage and improve the code readability.
Fixes: 146afeb235cc ("block: use strscpy() to instead of strncpy()")
Suggested-by: Naohiro Aota <naota@elisp.net>
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Reviewed-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/20240421074005.565-1-musashino.open@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0c12028aec837f5a002009bbf68d179d506510e8 ]
blkdev_iomap_begin rounds down the offset to the logical block size
before stashing it in iomap->offset and checking that it still is
inside the inode size.
Check the i_size check to the raw pos value so that we don't try a
zero size write if iter->pos is unaligned.
Fixes: 487c607df790 ("block: use iomap for writes to block devices")
Reported-by: syzbot+0a3683a0a6fecf909244@syzkaller.appspotmail.com
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: syzbot+0a3683a0a6fecf909244@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20240503081042.2078062-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a3dc1f2b6b932a13f139d3be3c765155542c1070 ]
The 4xxx driver can probe 4xxx and 402xx devices. However, the driver
only specifies the firmware images required for 4xxx.
This might result in external tools missing these binaries, if required,
in the initramfs.
Specify the firmware image used by 402xx with the MODULE_FIRMWARE()
macros in the 4xxx driver.
Fixes: a3e8c919b993 ("crypto: qat - add support for 402xx devices")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Damian Muszynski <damian.muszynski@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f0e729af2eb6bee9eb58c4df1087f14ebaefe26b ]
Is is reported that for dm-raid10, lvextend + lvchange --syncaction will
trigger following softlockup:
kernel:watchdog: BUG: soft lockup - CPU#3 stuck for 26s! [mdX_resync:6976]
CPU: 7 PID: 3588 Comm: mdX_resync Kdump: loaded Not tainted 6.9.0-rc4-next-20240419 #1
RIP: 0010:_raw_spin_unlock_irq+0x13/0x30
Call Trace:
<TASK>
md_bitmap_start_sync+0x6b/0xf0
raid10_sync_request+0x25c/0x1b40 [raid10]
md_do_sync+0x64b/0x1020
md_thread+0xa7/0x170
kthread+0xcf/0x100
ret_from_fork+0x30/0x50
ret_from_fork_asm+0x1a/0x30
And the detailed process is as follows:
md_do_sync
j = mddev->resync_min
while (j < max_sectors)
sectors = raid10_sync_request(mddev, j, &skipped)
if (!md_bitmap_start_sync(..., &sync_blocks))
// md_bitmap_start_sync set sync_blocks to 0
return sync_blocks + sectors_skippe;
// sectors = 0;
j += sectors;
// j never change
Root cause is that commit 301867b1c168 ("md/raid10: check
slab-out-of-bounds in md_bitmap_get_counter") return early from
md_bitmap_get_counter(), without setting returned blocks.
Fix this problem by always set returned blocks from
md_bitmap_get_counter"(), as it used to be.
Noted that this patch just fix the softlockup problem in kernel, the
case that bitmap size doesn't match array size still need to be fixed.
Fixes: 301867b1c168 ("md/raid10: check slab-out-of-bounds in md_bitmap_get_counter")
Reported-and-tested-by: Nigel Croxon <ncroxon@redhat.com>
Closes: https://lore.kernel.org/all/71ba5272-ab07-43ba-8232-d2da642acb4e@redhat.com/
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240422065824.2516-1-yukuai1@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 74df22453c51392476117d7330bf02cee6e987cf ]
The __alloc_size annotation for kmemdup() was getting disabled under
KUnit testing because the replaced fortify_panic macro implementation
was using "return NULL" as a way to survive the sanity checking. But
having the chance to return NULL invalidated __alloc_size, so kmemdup
was not passing the __builtin_dynamic_object_size() tests any more:
[23:26:18] [PASSED] fortify_test_alloc_size_kmalloc_const
[23:26:19] # fortify_test_alloc_size_kmalloc_dynamic: EXPECTATION FAILED at lib/fortify_kunit.c:265
[23:26:19] Expected __builtin_dynamic_object_size(p, 1) == expected, but
[23:26:19] __builtin_dynamic_object_size(p, 1) == -1 (0xffffffffffffffff)
[23:26:19] expected == 11 (0xb)
[23:26:19] __alloc_size() not working with __bdos on kmemdup("hello there", len, gfp)
[23:26:19] [FAILED] fortify_test_alloc_size_kmalloc_dynamic
Normal builds were not affected: __alloc_size continued to work there.
Use a zero-sized allocation instead, which allows __alloc_size to
behave.
Fixes: 4ce615e798a7 ("fortify: Provide KUnit counters for failure testing")
Fixes: fa4a3f86d498 ("fortify: Add KUnit tests for runtime overflows")
Link: https://lore.kernel.org/r/20240501232937.work.532-kees@kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fb28a8862dc4b5bf8e44578338f35d9c6c68339d ]
The EXEC_RODATA test plays a lot of tricks to live in the .rodata section,
and once again ran into objtool's (completely reasonable) assumptions
that executable code should live in an executable section. However, this
manifested only under CONFIG_CFI_CLANG=y, as one of the .cfi_sites was
pointing into the .rodata section.
Since we're testing non-CFI execution properties in perms.c (and
rodata.c), we can disable CFI for the involved functions, and remove the
CFI arguments from rodata.c entirely.
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202308301532.d7acf63e-oliver.sang@intel.com
Fixes: 6342a20efbd8 ("objtool: Add elf_create_section_pair()")
Link: https://lore.kernel.org/r/20240430234953.work.760-kees@kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9329933699b32d467a99befa20415c4b2172389a ]
The recently introduced commit '635ce0db8956 ("soc: qcom: pmic_glink:
don't traverse clients list without a lock")' ensured that the clients
list is not modified while traversed.
But the callback is made from the GLINK IRQ handler and as such this
mutual exclusion can not be provided by a (sleepable) mutex.
Replace the mutex with a spinlock.
Fixes: 635ce0db8956 ("soc: qcom: pmic_glink: don't traverse clients list without a lock")
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240430-pmic-glink-sleep-while-atomic-v1-1-88fb493e8545@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ef42b85a5609cd822ca0a68dd2bef2b12b5d1ca3 ]
SEND[MSG]_ZC produces multiple CQEs via notifications, LAZY_WAKE doesn't
handle it and so disable LAZY_WAKE for sendzc polling. It should be
fine, sends are not likely to be polled in the first place.
Fixes: 6ce4a93dbb5b ("io_uring/poll: use IOU_F_TWQ_LAZY_WAKE for wakeups")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/5b360fb352d91e3aec751d75c87dfb4753a084ee.1714488419.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5f90003f09042b504d90ee38618cfd380ce16f4a ]
Sections .hash and .gnu.hash are only created when CONFIG_PIE_BUILD
option is enabled. Drop these for the case CONFIG_PIE_BUILD is disabled.
[ agordeev: Reworded the commit message ]
Fixes: 778666df60f0 ("s390: compile relocatable kernel without -fPIE")
Suggested-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c819d7b836c5dfca0854d3e56664293601f2176d ]
The clock management in this driver does not seem to be correct. The
struct hwrng .init callback enables the clock, but there is no matching
.cleanup callback to disable the clock. The clock get disabled as some
later point by runtime PM suspend callback.
Furthermore, both runtime PM and sleep suspend callbacks access registers
first and disable clock which are used for register access second. If the
IP is already in RPM suspend and the system enters sleep state, the sleep
callback will attempt to access registers while the register clock are
already disabled. This bug has been fixed once before already in commit
9bae54942b13 ("hwrng: stm32 - fix pm_suspend issue"), and regressed in
commit ff4e46104f2e ("hwrng: stm32 - rework power management sequences") .
Fix this slightly differently, disable register clock at the end of .init
callback, this way the IP is disabled after .init. On every access to the
IP, which really is only stm32_rng_read(), do pm_runtime_get_sync() which
is already done in stm32_rng_read() to bring the IP from RPM suspend, and
pm_runtime_mark_last_busy()/pm_runtime_put_sync_autosuspend() to put it
back into RPM suspend.
Change sleep suspend/resume callbacks to enable and disable register clock
around register access, as those cannot use the RPM suspend/resume callbacks
due to slightly different initialization in those sleep callbacks. This way,
the register access should always be performed with clock surely enabled.
Fixes: ff4e46104f2e ("hwrng: stm32 - rework power management sequences")
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit da62ed5c019cc48648f37c7a07e6a56cf637a795 ]
In case of an irrecoverable failure, put the IP into RPM suspend
to avoid RPM imbalance. I did not trigger this case, but it seems
it should be done based on reading the code.
Fixes: b17bc6eb7c2b ("hwrng: stm32 - rework error handling in stm32_rng_read()")
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 31b57788a5024d3a114b28dad224a93831b90b5f ]
The conditional is used to check whether err is non-zero OR whether
reg variable is non-zero after clearing bits from it. This should be
done using logical OR, not bitwise OR, fix it.
Fixes: 6b85a7e141cb ("hwrng: stm32 - implement STM32MP13x support")
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 483fd65ce29317044d1d00757e3fd23503b6b04c ]
The function adf_send_admin_tl_start() enables the telemetry (TL)
feature on a QAT device by sending the ICP_QAT_FW_TL_START message to
the firmware. This triggers the FW to start writing TL data to a DMA
buffer in memory and returns an array containing the number of
accelerators of each type (slices) supported by this HW.
The pointer to this array is stored in the adf_tl_hw_data data
structure called slice_cnt.
The array slice_cnt is then used in the function tl_print_dev_data()
to report in debugfs only statistics about the supported accelerators.
An incorrect value of the elements in slice_cnt might lead to an out
of bounds memory read.
At the moment, there isn't an implementation of FW that returns a wrong
value, but for robustness validate the slice count array returned by FW.
Fixes: 69e7649f7cc2 ("crypto: qat - add support for device telemetry")
Signed-off-by: Lucas Segarra Fernandez <lucas.segarra.fernandez@intel.com>
Reviewed-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 07d1b99825f40f9c0d93e6b99d79a08d0717bac1 ]
When a mutex lock is not used any more, the function mutex_destroy
should be called to mark the mutex lock uninitialized.
Fixes: f2298c0403b0 ("null_blk: multi queue aware block test driver")
Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Link: https://lore.kernel.org/r/20240425171635.4227-1-yanjun.zhu@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ed4d5ab179b9f0a60da87c650a31f1816db9b4b4 ]
For cmdq jump command, offset 0 means relative jump and offset 1
means absolute jump. cmdq_pkt_jump() is absolute jump, so fix the
typo of CMDQ_JUMP_RELATIVE in cmdq_pkt_jump().
Fixes: 946f1792d3d7 ("soc: mediatek: cmdq: add jump function")
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240222154120.16959-2-chunkuang.hu@kernel.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2e4955167ec5c04534cebea9e8273a907e7a75e1 ]
It is possible qcom_scm_is_available() gives wrong indication that
if __scm is initialized while __scm->dev is not and similar issue
is also possible with __scm->waitq_comp.
Fix this appropriately by the use of release barrier and read barrier
that will make sure if __scm is initialized so, is all of its field
variable.
Fixes: d0f6fa7ba2d6 ("firmware: qcom: scm: Convert SCM to platform driver")
Fixes: 6bf325992236 ("firmware: qcom: scm: Add wait-queue handling logic")
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Link: https://lore.kernel.org/r/1711034642-22860-4-git-send-email-quic_mojha@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d6cbce2cd354c9a37a558f290a8f1dfd20584f99 ]
In case the client is registered after the pmic-glink recived a response
from the Protection Domain mapper, it is going to miss the notification
about the state. Notify clients about the current state upon
registration.
Fixes: 58ef4ece1e41 ("soc: qcom: pmic_glink: Introduce base PMIC GLINK driver")
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Tested-by: Xilin Wu <wuxilin123@gmail.com> # on QCS8550 AYN Odin 2
Link: https://lore.kernel.org/r/20240403-pmic-glink-fix-clients-v2-2-aed4e02baacc@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 635ce0db89567ba62f64b79e8c6664ba3eff6516 ]
Take the client_lock before traversing the clients list at the
pmic_glink_state_notify_clients() function. This is required to keep the
list traversal safe from concurrent modification.
Fixes: 58ef4ece1e41 ("soc: qcom: pmic_glink: Introduce base PMIC GLINK driver")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Tested-by: Xilin Wu <wuxilin123@gmail.com> # on QCS8550 AYN Odin 2
Link: https://lore.kernel.org/r/20240403-pmic-glink-fix-clients-v2-1-aed4e02baacc@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d281a28bd2a94d72c440457e05a2f04a52f15947 ]
Improve error logging in rate limiting feature. Staying consistent with
the error logging found in the telemetry feature.
Fixes: d9fb8408376e ("crypto: qat - add rate limiting feature to qat_4xxx")
Signed-off-by: Adam Guerin <adam.guerin@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 06201e00ee3e4beacac48aab2b83eff64ebf0bc0 ]
commit fa41ba0d08de ("s390/mm: avoid empty zero pages for KVM guests to
avoid postcopy hangs") introduced an undesired side effect when combined
with memory ballooning and VM migration: memory part of the inflated
memory balloon will consume memory.
Assuming we have a 100GiB VM and inflated the balloon to 40GiB. Our VM
will consume ~60GiB of memory. If we now trigger a VM migration,
hypervisors like QEMU will read all VM memory. As s390x does not support
the shared zeropage, we'll end up allocating for all previously-inflated
memory part of the memory balloon: 50 GiB. So we might easily
(unexpectedly) crash the VM on the migration source.
Even worse, hypervisors like QEMU optimize for zeropage migration to not
consume memory on the migration destination: when migrating a
"page full of zeroes", on the migration destination they check whether the
target memory is already zero (by reading the destination memory) and avoid
writing to the memory to not allocate memory: however, s390x will also
allocate memory here, implying that also on the migration destination, we
will end up allocating all previously-inflated memory part of the memory
balloon.
This is especially bad if actual memory overcommit was not desired, when
memory ballooning is used for dynamic VM memory resizing, setting aside
some memory during boot that can be added later on demand. Alternatives
like virtio-mem that would avoid this issue are not yet available on
s390x.
There could be ways to optimize some cases in user space: before reading
memory in an anonymous private mapping on the migration source, check via
/proc/self/pagemap if anything is already populated. Similarly check on
the migration destination before reading. While that would avoid
populating tables full of shared zeropages on all architectures, it's
harder to get right and performant, and requires user space changes.
Further, with posctopy live migration we must place a page, so there,
"avoid touching memory to avoid allocating memory" is not really
possible. (Note that a previously we would have falsely inserted
shared zeropages into processes using UFFDIO_ZEROPAGE where
mm_forbids_zeropage() would have actually forbidden it)
PV is currently incompatible with memory ballooning, and in the common
case, KVM guests don't make use of storage keys. Instead of zapping
zeropages when enabling storage keys / PV, that turned out to be
problematic in the past, let's do exactly the same we do with KSM pages:
trigger unsharing faults to replace the shared zeropages by proper
anonymous folios.
What about added latency when enabling storage kes? Having a lot of
zeropages in applicable environments (PV, legacy guests, unittests) is
unexpected. Further, KSM could today already unshare the zeropages
and unmerging KSM pages when enabling storage kets would unshare the
KSM-placed zeropages in the same way, resulting in the same latency.
[ agordeev: Fixed sparse and checkpatch complaints and error handling ]
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Tested-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Fixes: fa41ba0d08de ("s390/mm: avoid empty zero pages for KVM guests to avoid postcopy hangs")
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20240411161441.910170-3-david@redhat.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 90a7592da14951bd21f74a53246ba30955a648aa ]
s390x must disable shared zeropages for processes running VMs, because
the VMs could end up making use of "storage keys" or protected
virtualization, which are incompatible with shared zeropages.
Yet, with userfaultfd it is possible to insert shared zeropages into
such processes. Let's fallback to simply allocating a fresh zeroed
anonymous folio and insert that instead.
mm_forbids_zeropage() was introduced in commit 593befa6ab74 ("mm: introduce
mm_forbids_zeropage function"), briefly before userfaultfd went
upstream.
Note that we don't want to fail the UFFDIO_ZEROPAGE request like we do
for hugetlb, it would be rather unexpected. Further, we also
cannot really indicated "not supported" to user space ahead of time: it
could be that the MM disallows zeropages after userfaultfd was already
registered.
[ agordeev: Fixed checkpatch complaints ]
Fixes: c1a4de99fada ("userfaultfd: mcopy_atomic|mfill_zeropage: UFFDIO_COPY|UFFDIO_ZEROPAGE preparation")
Reviewed-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/20240411161441.910170-2-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 068c27e32e51e94e4a9eb30ae85f4097a3602980 ]
Commit 361aee450c6e ("io-wq: add intermediate work step between pending
list and active work") closed a race between a cancellation and the work
being removed from the wq for execution. To ensure the request is
always reachable by the cancellation, we need to move it within the wq
lock, which also synchronizes the cancellation. But commit
42abc95f05bf ("io-wq: decouple work_list protection from the big
wqe->lock") replaced the wq lock here and accidentally reintroduced the
race by releasing the acct_lock too early.
In other words:
worker | cancellation
work = io_get_next_work() |
raw_spin_unlock(&acct->lock); |
|
| io_acct_cancel_pending_work
| io_wq_worker_cancel()
worker->next_work = work
Using acct_lock is still enough since we synchronize on it on
io_acct_cancel_pending_work.
Fixes: 42abc95f05bf ("io-wq: decouple work_list protection from the big wqe->lock")
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
Link: https://lore.kernel.org/r/20240416021054.3940-2-krisman@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ad191eb6d6942bb835a0b20b647f7c53c1d99ca4 ]
When renaming onto an existing directory entry, user space expects
the replacement entry to have the same directory offset as the
original one.
Link: https://gitlab.alpinelinux.org/alpine/aports/-/issues/15966
Fixes: a2e459555c5f ("shmem: stable directory offsets")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/20240415152057.4605-4-cel@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5a1a25be995e1014abd01600479915683e356f5c ]
I'm about to fix a tmpfs rename bug that requires the use of
internal simple_offset helpers that are not available in mm/shmem.c
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/20240415152057.4605-3-cel@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Stable-dep-of: ad191eb6d694 ("shmem: Fix shmem_rename2()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 23cdd0eed3f1fff3af323092b0b88945a7950d8e ]
User space expects the replacement (old) directory entry to have
the same directory offset after the rename.
Suggested-by: Christian Brauner <brauner@kernel.org>
Fixes: a2e459555c5f ("shmem: stable directory offsets")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/20240415152057.4605-2-cel@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c6854e5a267c28300ff045480b5a7ee7f6f1d913 ]
Add a check to make sure that the requested xattr node size is no larger
than the eraseblock minus the cleanmarker.
Unlike the usual inode nodes, the xattr nodes aren't split into parts
and spread across multiple eraseblocks, which means that a xattr node
must not occupy more than one eraseblock. If the requested xattr value is
too large, the xattr node can spill onto the next eraseblock, overwriting
the nodes and causing errors such as:
jffs2: argh. node added in wrong place at 0x0000b050(2)
jffs2: nextblock 0x0000a000, expected at 0000b00c
jffs2: error: (823) do_verify_xattr_datum: node CRC failed at 0x01e050,
read=0xfc892c93, calc=0x000000
jffs2: notice: (823) jffs2_get_inode_nodes: Node header CRC failed
at 0x01e00c. {848f,2fc4,0fef511f,59a3d171}
jffs2: Node at 0x0000000c with length 0x00001044 would run over the
end of the erase block
jffs2: Perhaps the file system was created with the wrong erase size?
jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found
at 0x00000010: 0x1044 instead
This breaks the filesystem and can lead to KASAN crashes such as:
BUG: KASAN: slab-out-of-bounds in jffs2_sum_add_kvec+0x125e/0x15d0
Read of size 4 at addr ffff88802c31e914 by task repro/830
CPU: 0 PID: 830 Comm: repro Not tainted 6.9.0-rc3+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS Arch Linux 1.16.3-1-1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0xc6/0x120
print_report+0xc4/0x620
? __virt_addr_valid+0x308/0x5b0
kasan_report+0xc1/0xf0
? jffs2_sum_add_kvec+0x125e/0x15d0
? jffs2_sum_add_kvec+0x125e/0x15d0
jffs2_sum_add_kvec+0x125e/0x15d0
jffs2_flash_direct_writev+0xa8/0xd0
jffs2_flash_writev+0x9c9/0xef0
? __x64_sys_setxattr+0xc4/0x160
? do_syscall_64+0x69/0x140
? entry_SYSCALL_64_after_hwframe+0x76/0x7e
[...]
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: aa98d7cf59b5 ("[JFFS2][XATTR] XATTR support on JFFS2 (version. 5)")
Signed-off-by: Ilya Denisyev <dev@elkcl.ru>
Link: https://lore.kernel.org/r/20240412155357.237803-1-dev@elkcl.ru
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit deff401b14e2d832b25b55862ad6c73378fe034e ]
Commit 4fc8cb47fcfd ("drm/display: Move HDMI helpers into display-helper
module") turned the DRM_DW_HDMI dependency of DRM_SUN8I_DW_HDMI into a
depends on which ended up disabling the driver in the defconfig. Make
sure it's still enabled.
Fixes: 4fc8cb47fcfd ("drm/display: Move HDMI helpers into display-helper module")
Reported-by: Mark Brown <broonie@kernel.org>
Reported-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20240403-fix-dw-hdmi-kconfig-v1-5-afbc4a835c38@kernel.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3758f7d9917bd7ef0482c4184c0ad673b4c4e069 ]
The rcuc-starvation output from print_cpu_stall_info() might overflow the
buffer if there is a huge difference in jiffies difference. The situation
might seem improbable, but computers sometimes get very confused about
time, which can result in full-sized integers, and, in this case,
buffer overflow.
Also, the unsigned jiffies difference is printed using %ld, which is
normally for signed integers. This is intentional for debugging purposes,
but it is not obvious from the code.
This commit therefore changes sprintf() to snprintf() and adds a
clarifying comment about intention of %ld format.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 245a62982502 ("rcu: Dump rcuc kthread status for CPUs not reporting quiescent state")
Signed-off-by: Nikita Kiryushin <kiryushin@ancud.ru>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cc5645fddb0ce28492b15520306d092730dffa48 ]
There is a possibility of buffer overflow in
show_rcu_tasks_trace_gp_kthread() if counters, passed
to sprintf() are huge. Counter numbers, needed for this
are unrealistically high, but buffer overflow is still
possible.
Use snprintf() with buffer size instead of sprintf().
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: edf3775f0ad6 ("rcu-tasks: Add count for idle tasks on offline CPUs")
Signed-off-by: Nikita Kiryushin <kiryushin@ancud.ru>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 22537c9f79417fed70b352d54d01d2586fee9521 ]
io_task_work_pending() uses wq_list_empty() on ctx->work_llist, but it's
not an io_wq_work_list, it's a struct llist_head. They both have
->first as head-of-list, and it turns out the checks are identical. But
be proper and use the right helper.
Fixes: dac6a0eae793 ("io_uring: ensure iopoll runs local task work as well")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8692a24d0fae19f674d51726d179ad04ba95d958 ]
The subchannel-type field "st" of s390_cio_stsch and s390_cio_msch
tracepoints is incorrectly filled with the subchannel-enabled SCHIB
value "ena". Fix this by assigning the correct value.
Fixes: d1de8633d96a ("s390 cio: Rewrite trace point class s390_class_schib")
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6a24fdfe1edbafacdacd53516654d99068f20eec ]
Since sha512_transform_rorx() uses ymm registers, execute vzeroupper
before returning from it. This is necessary to avoid reducing the
performance of SSE code.
Fixes: e01d69cb0195 ("crypto: sha512 - Optimized SHA512 x86_64 assembly routine using AVX instructions.")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 57ce8a4e162599cf9adafef1f29763160a8e5564 ]
Since sha256_transform_rorx() uses ymm registers, execute vzeroupper
before returning from it. This is necessary to avoid reducing the
performance of SSE code.
Fixes: d34a460092d8 ("crypto: sha256 - Optimized sha256 x86_64 routine using AVX2's RORX instructions")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4ad096cca942959871d8ff73826d30f81f856f6e ]
Since nh_avx2() uses ymm registers, execute vzeroupper before returning
from it. This is necessary to avoid reducing the performance of SSE
code.
Fixes: 0f961f9f670e ("crypto: x86/nhpoly1305 - add AVX2 accelerated NHPoly1305")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 42c2d7d02977ef09d434b1f5b354f5bc6c1027ab ]
When both ACPI and OF are disabled, the dev_vdata variable is unused:
drivers/crypto/ccp/sp-platform.c:33:34: error: unused variable 'dev_vdata' [-Werror,-Wunused-const-variable]
This is not a useful configuration, and there is not much point in saving
a few bytes when only one of the two is enabled, so just remove all
these ifdef checks and rely on of_match_node() and acpi_match_device()
returning NULL when these subsystems are disabled.
Fixes: 6c5063434098 ("crypto: ccp - Add ACPI support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c57e5dccb06decf3cb6c272ab138c033727149b5 ]
__cmpxchg_u8() had been added (initially) for the sake of
drivers/phy/ti/phy-tusb1210.c; the thing is, that drivers is
modular, so we need an export
Fixes: b344d6a83d01 "parisc: add support for cmpxchg on u8 pointers"
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c473bcdd80d4ab2ae79a7a509a6712818366e32a ]
clang-14 points out that v_size is always smaller than a 64KB
page size if that is configured by the CPU architecture:
fs/nilfs2/ioctl.c:63:19: error: result of comparison of constant 65536 with expression of type '__u16' (aka 'unsigned short') is always false [-Werror,-Wtautological-constant-out-of-range-compare]
if (argv->v_size > PAGE_SIZE)
~~~~~~~~~~~~ ^ ~~~~~~~~~
This is ok, so just shut up that warning with a cast.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240328143051.1069575-7-arnd@kernel.org
Fixes: 3358b4aaa84f ("nilfs2: fix problems of memory allocation in ioctl")
Acked-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit df518a0ae1b982a4dcf2235464016c0c4576a34d ]
The buffer used to transfer data over the mailbox interface is mapped
using the client's device. This is incorrect, as the device performing
the DMA transfer is the mailbox itself. Fix it by using the mailbox
controller device instead.
This requires including the mailbox_controller.h header to dereference
the mbox_chan and mbox_controller structures. The header is not meant to
be included by clients. This could be fixed by extending the client API
with a function to access the controller's device.
Fixes: 4e3d60656a72 ("ARM: bcm2835: Add the Raspberry Pi firmware driver")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Tested-by: Ivan T. Ivanov <iivanov@suse.de>
Link: https://lore.kernel.org/r/20240326195807.15163-3-laurent.pinchart@ideasonboard.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b1080c667b3b2c8c38a7fa83ca5567124887abae ]
Two failure patterns are seen randomly when running slub_kunit tests with
CONFIG_SLAB_FREELIST_RANDOM and CONFIG_SLAB_FREELIST_HARDENED enabled.
Pattern 1:
# test_clobber_zone: pass:1 fail:0 skip:0 total:1
ok 1 test_clobber_zone
# test_next_pointer: EXPECTATION FAILED at lib/slub_kunit.c:72
Expected 3 == slab_errors, but
slab_errors == 0 (0x0)
# test_next_pointer: EXPECTATION FAILED at lib/slub_kunit.c:84
Expected 2 == slab_errors, but
slab_errors == 0 (0x0)
# test_next_pointer: pass:0 fail:1 skip:0 total:1
not ok 2 test_next_pointer
In this case, test_next_pointer() overwrites p[s->offset], but the data
at p[s->offset] is already 0x12.
Pattern 2:
ok 1 test_clobber_zone
# test_next_pointer: EXPECTATION FAILED at lib/slub_kunit.c:72
Expected 3 == slab_errors, but
slab_errors == 2 (0x2)
# test_next_pointer: pass:0 fail:1 skip:0 total:1
not ok 2 test_next_pointer
In this case, p[s->offset] has a value other than 0x12, but one of the
expected failures is nevertheless missing.
Invert data instead of writing a fixed value to corrupt the cache data
structures to fix the problem.
Fixes: 1f9f78b1b376 ("mm/slub, kunit: add a KUnit test for SLUB debugging functionality")
Cc: Oliver Glitta <glittao@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
CC: Daniel Latypov <dlatypov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e478c5fb6aa10af7b7edbff69bc8aef6fbb5f0ed ]
For !OF builds, the qcom_scm_qseecom_allowlist is unused:
drivers/firmware/qcom/qcom_scm.c:1652:34: error: ‘qcom_scm_qseecom_allowlist’ defined but not used [-Werror=unused-const-variable=]
Fixes: 00b1248606ba ("firmware: qcom_scm: Add support for Qualcomm Secure Execution Environment SCM interface")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311191654.S4wlVUrz-lkp@intel.com/
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20231120185623.338608-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2b3460cbf454c6b03d7429e9ffc4fe09322eb1a9 ]
In spu2_dump_omd() value of ptr is increased by ciph_key_len
instead of hash_iv_len which could lead to going beyond the
buffer boundaries.
Fix this bug by changing ciph_key_len to hash_iv_len.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 9d12ba86f818 ("crypto: brcm - Add Broadcom SPU driver")
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8f27829974b025d4df2e78894105d75e3bf349f0 ]
The original mount API conversion inexplicably left out the change
from ->remount_fs to ->reconfigure; do that now.
Fixes: 7ab2fa7693c3 ("vfs: Convert openpromfs to use the new mount API")
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Link: https://lore.kernel.org/r/90b968aa-c979-420f-ba37-5acc3391b28f@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 9d2fd8bdc12f403a5c35c971936a0e1d5cb5108e upstream.
Since the signature self-test uses RSA and SHA-256, it must only be
enabled when those algorithms are enabled. Otherwise it fails and
panics the kernel on boot-up.
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202404221528.51d75177-lkp@intel.com
Fixes: 3cde3174eb91 ("certs: Add FIPS selftests")
Cc: stable@vger.kernel.org
Cc: Simo Sorce <simo@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dcaa86b904ea3761e62c849957dd0904e126bf4a upstream.
Make ASYMMETRIC_PUBLIC_KEY_SUBTYPE select CRYPTO_SIG to avoid build
errors like the following, which were possible with
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y && CONFIG_CRYPTO_SIG=n:
ld: vmlinux.o: in function `public_key_verify_signature':
(.text+0x306280): undefined reference to `crypto_alloc_sig'
ld: (.text+0x306300): undefined reference to `crypto_sig_set_pubkey'
ld: (.text+0x306324): undefined reference to `crypto_sig_verify'
ld: (.text+0x30636c): undefined reference to `crypto_sig_set_privkey'
Fixes: 63ba4d67594a ("KEYS: asymmetric: Use new crypto interface without scatterlists")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 87988a534d8e12f2e6fc01fe63e6c1925dc5307c upstream.
In snd_card_disconnect(), we set card->shutdown flag at the beginning,
call callbacks and do sync for card->power_ref_sleep waiters at the
end. The callback may delete a kctl element, and this can lead to a
deadlock when the device was in the suspended state. Namely:
* A process waits for the power up at snd_power_ref_and_wait() in
snd_ctl_info() or read/write() inside card->controls_rwsem.
* The system gets disconnected meanwhile, and the driver tries to
delete a kctl via snd_ctl_remove*(); it tries to take
card->controls_rwsem again, but this is already locked by the
above. Since the sleeper isn't woken up, this deadlocks.
An easy fix is to wake up sleepers before processing the driver
disconnect callbacks but right after setting the card->shutdown flag.
Then all sleepers will abort immediately, and the code flows again.
So, basically this patch moves the wait_event() call at the right
timing. While we're at it, just to be sure, call wait_event_all()
instead of wait_event(), although we don't use exclusive events on
this queue for now.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218816
Cc: <stable@vger.kernel.org>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20240510101424.6279-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4a63bd179fa8d3fcc44a0d9d71d941ddd62f0c4e upstream.
Currently ALSA timer doesn't have the lower limit of the start tick
time, and it allows a very small size, e.g. 1 tick with 1ns resolution
for hrtimer. Such a situation may lead to an unexpected RCU stall,
where the callback repeatedly queuing the expire update, as reported
by fuzzer.
This patch introduces a sanity check of the timer start tick time, so
that the system returns an error when a too small start size is set.
As of this patch, the lower limit is hard-coded to 100us, which is
small enough but can still work somehow.
Reported-by: syzbot+43120c2af6ca2938cc38@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/r/000000000000fa00a1061740ab6d@google.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240514182745.4015-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
