IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Fix NAT IPv6 offload in the flowtable.
2) icmpv6 is printed as unknown in /proc/net/nf_conntrack.
3) Use div64_u64() in nft_limit, from Eric Dumazet.
4) Use pre_exit to unregister ebtables and arptables hooks,
from Florian Westphal.
5) Fix out-of-bound memset in x_tables compat match/target,
also from Florian.
6) Clone set elements expression to ensure proper initialization.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
xt_compat_match/target_from_user doesn't check that zeroing the area
to start of next rule won't write past end of allocated ruleset blob.
Remove this code and zero the entire blob beforehand.
Reported-by: syzbot+cfc0247ac173f597aaaa@syzkaller.appspotmail.com
Reported-by: Andy Nguyen <theflow@google.com>
Fixes: 9fa492cdc1 ("[NETFILTER]: x_tables: simplify compat API")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add missing 't' in attrtype.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit fee2d54641 ("net: phy: marvell: mv88e6390 temperature
sensor reading"), Linux reports the temperature of Topaz hwmon as
constant -75°C.
This is because switches from the Topaz family (88E6141 / 88E6341) have
the address of the temperature sensor register different from Peridot.
This address is instead compatible with 88E1510 PHYs, as was used for
Topaz before the above mentioned commit.
Create a new mapping table between switch family and PHY ID for families
which don't have a model number. And define PHY IDs for Topaz and Peridot
families.
Create a new PHY ID and a new PHY driver for Topaz's internal PHY.
The only difference from Peridot's PHY driver is the HWMON probing
method.
Prior this change Topaz's internal PHY is detected by kernel as:
PHY [...] driver [Marvell 88E6390] (irq=63)
And afterwards as:
PHY [...] driver [Marvell 88E6341 Family] (irq=63)
Signed-off-by: Pali Rohár <pali@kernel.org>
BugLink: https://github.com/globalscaletechnologies/linux/issues/1
Fixes: fee2d54641 ("net: phy: marvell: mv88e6390 temperature sensor reading")
Reviewed-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Check within geneve_xmit_skb/geneve6_xmit_skb that sk_buff structure
is large enough to include IPv4 or IPv6 header, and reject if not. The
geneve_xmit_skb portion and overall idea was contributed by Eric Dumazet.
Fixes a KMSAN-found uninit-value bug reported by syzbot at:
https://syzkaller.appspot.com/bug?id=abe95dc3e3e9667fc23b8d81f29ecad95c6f106f
Suggested-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot+2e406a9ac75bb71d4b7a@syzkaller.appspotmail.com
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the probe fails, we must disable the regulator that was previously
enabled.
This patch is a follow-up to commit ac88c531a5
("net: davicom: Fix regulator not turned off on failed probe") which missed
one case.
Fixes: 7994fe55a4 ("dm9000: Add regulator and reset support to dm9000")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Update maintainer entry for freescale fec driver.
Suggested-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Same problem that also existed in iptables/ip(6)tables, when
arptable_filter is removed there is no longer a wait period before the
table/ruleset is free'd.
Unregister the hook in pre_exit, then remove the table in the exit
function.
This used to work correctly because the old nf_hook_unregister API
did unconditional synchronize_net.
The per-net hook unregister function uses call_rcu instead.
Fixes: b9e69e1273 ("netfilter: xtables: don't hook tables by default")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Just like ip/ip6/arptables, the hooks have to be removed, then
synchronize_rcu() has to be called to make sure no more packets are being
processed before the ruleset data is released.
Place the hook unregistration in the pre_exit hook, then call the new
ebtables pre_exit function from there.
Years ago, when first netns support got added for netfilter+ebtables,
this used an older (now removed) netfilter hook unregister API, that did
a unconditional synchronize_rcu().
Now that all is done with call_rcu, ebtable_{filter,nat,broute} pernet exit
handlers may free the ebtable ruleset while packets are still in flight.
This can only happens on module removal, not during netns exit.
The new function expects the table name, not the table struct.
This is because upcoming patch set (targeting -next) will remove all
net->xt.{nat,filter,broute}_table instances, this makes it necessary
to avoid external references to those member variables.
The existing APIs will be converted, so follow the upcoming scheme of
passing name + hook type instead.
Fixes: aee12a0a37 ("ebtables: remove nf_hook_register usage")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
mac80211, wireless, and bpf trees. No scary regressions here
or in the works, but small fixes for 5.12 changes keep coming.
Current release - regressions:
- virtio: do not pull payload in skb->head
- virtio: ensure mac header is set in virtio_net_hdr_to_skb()
- Revert "net: correct sk_acceptq_is_full()"
- mptcp: revert "mptcp: provide subflow aware release function"
- ethernet: lan743x: fix ethernet frame cutoff issue
- dsa: fix type was not set for devlink port
- ethtool: remove link_mode param and derive link params
from driver
- sched: htb: fix null pointer dereference on a null new_q
- wireless: iwlwifi: Fix softirq/hardirq disabling in
iwl_pcie_enqueue_hcmd()
- wireless: iwlwifi: fw: fix notification wait locking
- wireless: brcmfmac: p2p: Fix deadlock introduced by avoiding
the rtnl dependency
Current release - new code bugs:
- napi: fix hangup on napi_disable for threaded napi
- bpf: take module reference for trampoline in module
- wireless: mt76: mt7921: fix airtime reporting and related
tx hangs
- wireless: iwlwifi: mvm: rfi: don't lock mvm->mutex when sending
config command
Previous releases - regressions:
- rfkill: revert back to old userspace API by default
- nfc: fix infinite loop, refcount & memory leaks in LLCP sockets
- let skb_orphan_partial wake-up waiters
- xfrm/compat: Cleanup WARN()s that can be user-triggered
- vxlan, geneve: do not modify the shared tunnel info when PMTU
triggers an ICMP reply
- can: fix msg_namelen values depending on CAN_REQUIRED_SIZE
- can: uapi: mark union inside struct can_frame packed
- sched: cls: fix action overwrite reference counting
- sched: cls: fix err handler in tcf_action_init()
- ethernet: mlxsw: fix ECN marking in tunnel decapsulation
- ethernet: nfp: Fix a use after free in nfp_bpf_ctrl_msg_rx
- ethernet: i40e: fix receiving of single packets in xsk zero-copy
mode
- ethernet: cxgb4: avoid collecting SGE_QBASE regs during traffic
Previous releases - always broken:
- bpf: Refuse non-O_RDWR flags in BPF_OBJ_GET
- bpf: Refcount task stack in bpf_get_task_stack
- bpf, x86: Validate computation of branch displacements
- ieee802154: fix many similar syzbot-found bugs
- fix NULL dereferences in netlink attribute handling
- reject unsupported operations on monitor interfaces
- fix error handling in llsec_key_alloc()
- xfrm: make ipv4 pmtu check honor ip header df
- xfrm: make hash generation lock per network namespace
- xfrm: esp: delete NETIF_F_SCTP_CRC bit from features for esp
offload
- ethtool: fix incorrect datatype in set_eee ops
- xdp: fix xdp_return_frame() kernel BUG throw for page_pool
memory model
- openvswitch: fix send of uninitialized stack memory in ct limit
reply
Misc:
- udp: add get handling for UDP_GRO sockopt
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=SHL0
-----END PGP SIGNATURE-----
Merge tag 'net-5.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes for 5.12-rc7, including fixes from can, ipsec,
mac80211, wireless, and bpf trees.
No scary regressions here or in the works, but small fixes for 5.12
changes keep coming.
Current release - regressions:
- virtio: do not pull payload in skb->head
- virtio: ensure mac header is set in virtio_net_hdr_to_skb()
- Revert "net: correct sk_acceptq_is_full()"
- mptcp: revert "mptcp: provide subflow aware release function"
- ethernet: lan743x: fix ethernet frame cutoff issue
- dsa: fix type was not set for devlink port
- ethtool: remove link_mode param and derive link params from driver
- sched: htb: fix null pointer dereference on a null new_q
- wireless: iwlwifi: Fix softirq/hardirq disabling in
iwl_pcie_enqueue_hcmd()
- wireless: iwlwifi: fw: fix notification wait locking
- wireless: brcmfmac: p2p: Fix deadlock introduced by avoiding the
rtnl dependency
Current release - new code bugs:
- napi: fix hangup on napi_disable for threaded napi
- bpf: take module reference for trampoline in module
- wireless: mt76: mt7921: fix airtime reporting and related tx hangs
- wireless: iwlwifi: mvm: rfi: don't lock mvm->mutex when sending
config command
Previous releases - regressions:
- rfkill: revert back to old userspace API by default
- nfc: fix infinite loop, refcount & memory leaks in LLCP sockets
- let skb_orphan_partial wake-up waiters
- xfrm/compat: Cleanup WARN()s that can be user-triggered
- vxlan, geneve: do not modify the shared tunnel info when PMTU
triggers an ICMP reply
- can: fix msg_namelen values depending on CAN_REQUIRED_SIZE
- can: uapi: mark union inside struct can_frame packed
- sched: cls: fix action overwrite reference counting
- sched: cls: fix err handler in tcf_action_init()
- ethernet: mlxsw: fix ECN marking in tunnel decapsulation
- ethernet: nfp: Fix a use after free in nfp_bpf_ctrl_msg_rx
- ethernet: i40e: fix receiving of single packets in xsk zero-copy
mode
- ethernet: cxgb4: avoid collecting SGE_QBASE regs during traffic
Previous releases - always broken:
- bpf: Refuse non-O_RDWR flags in BPF_OBJ_GET
- bpf: Refcount task stack in bpf_get_task_stack
- bpf, x86: Validate computation of branch displacements
- ieee802154: fix many similar syzbot-found bugs
- fix NULL dereferences in netlink attribute handling
- reject unsupported operations on monitor interfaces
- fix error handling in llsec_key_alloc()
- xfrm: make ipv4 pmtu check honor ip header df
- xfrm: make hash generation lock per network namespace
- xfrm: esp: delete NETIF_F_SCTP_CRC bit from features for esp
offload
- ethtool: fix incorrect datatype in set_eee ops
- xdp: fix xdp_return_frame() kernel BUG throw for page_pool memory
model
- openvswitch: fix send of uninitialized stack memory in ct limit
reply
Misc:
- udp: add get handling for UDP_GRO sockopt"
* tag 'net-5.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (182 commits)
net: fix hangup on napi_disable for threaded napi
net: hns3: Trivial spell fix in hns3 driver
lan743x: fix ethernet frame cutoff issue
net: ipv6: check for validity before dereferencing cfg->fc_nlinfo.nlh
net: dsa: lantiq_gswip: Configure all remaining GSWIP_MII_CFG bits
net: dsa: lantiq_gswip: Don't use PHY auto polling
net: sched: sch_teql: fix null-pointer dereference
ipv6: report errors for iftoken via netlink extack
net: sched: fix err handler in tcf_action_init()
net: sched: fix action overwrite reference counting
Revert "net: sched: bump refcount for new action in ACT replace mode"
ice: fix memory leak of aRFS after resuming from suspend
i40e: Fix sparse warning: missing error code 'err'
i40e: Fix sparse error: 'vsi->netdev' could be null
i40e: Fix sparse error: uninitialized symbol 'ring'
i40e: Fix sparse errors in i40e_txrx.c
i40e: Fix parameters in aq_get_phy_register()
nl80211: fix beacon head validation
bpf, x86: Validate computation of branch displacements for x86-32
bpf, x86: Validate computation of branch displacements for x86-64
...
-----BEGIN PGP SIGNATURE-----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=EbJ/
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.12-2021-04-09' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"Two minor fixups for the reissue logic, and one for making sure that
unbounded work is canceled on io-wq exit"
* tag 'io_uring-5.12-2021-04-09' of git://git.kernel.dk/linux-block:
io-wq: cancel unbounded works on io-wq destroy
io_uring: fix rw req completion
io_uring: clear F_REISSUE right after getting it
- Fix fw_devlink failure with ".*,nr-gpios" properties
- Doc link reference fixes from Mauro
- Fixes for unaligned FDT handling found on OpenRisc. First, avoid
crash with better error handling when unflattening an unaligned FDT.
Second, fix memory allocations for FDTs to ensure alignment.
-----BEGIN PGP SIGNATURE-----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=7rNZ
-----END PGP SIGNATURE-----
Merge tag 'devicetree-fixes-for-5.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Fix fw_devlink failure with ".*,nr-gpios" properties
- Doc link reference fixes from Mauro
- Fixes for unaligned FDT handling found on OpenRisc. First, avoid
crash with better error handling when unflattening an unaligned FDT.
Second, fix memory allocations for FDTs to ensure alignment.
* tag 'devicetree-fixes-for-5.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of: property: fw_devlink: do not link ".*,nr-gpios"
dt-bindings:iio:adc: update motorola,cpcap-adc.yaml reference
dt-bindings: fix references for iio-bindings.txt
dt-bindings: don't use ../dir for doc references
of: unittest: overlay: ensure proper alignment of copied FDT
of: properly check for error returned by fdt_get_name()
amdgpu:
- DCN3 fix
- Fix CAC setting regression for TOPAZ
- Fix ttm regression
radeon:
- Fix ttm regression
msm:
- a5xx/a6xx timestamp fix
- microcode version check
- fail path fix
- block programming fix
- error removal fix.
i915:
- Fix invalid access to ACPI _DSM objects
xen:
- Fix use-after-free in xen.
- minor duplicate defintion cleanup
vc4:
- Reduce fifo threshold on hvs4 to fix a fifo full error.
- minor redunantant assignment cleanup
panel:
- Disable TE support for Droid4 and N950.
-----BEGIN PGP SIGNATURE-----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=gQ9i
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2021-04-10' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Was relatively quiet this week, but still a few pulls came in, pretty
much small fixes across the board, a couple of regression fixes in the
amdgpu/radeon code, msm has a few minor fixes across the board, a
panel regression fix also.
amdgpu:
- DCN3 fix
- Fix CAC setting regression for TOPAZ
- Fix ttm regression
radeon:
- Fix ttm regression
msm:
- a5xx/a6xx timestamp fix
- microcode version check
- fail path fix
- block programming fix
- error removal fix
i915:
- Fix invalid access to ACPI _DSM objects
xen:
- Fix use-after-free in xen
- minor duplicate defintion cleanup
vc4:
- Reduce fifo threshold on hvs4 to fix a fifo full error
- minor redunantant assignment cleanup
panel:
- Disable TE support for Droid4 and N950"
* tag 'drm-fixes-2021-04-10' of git://anongit.freedesktop.org/drm/drm:
drm/vc4: crtc: Reduce PV fifo threshold on hvs4
drm/vc4: plane: Remove redundant assignment
drm/amdgpu/smu7: fix CAC setting on TOPAZ
drm/radeon: Fix size overflow
drm/amdgpu: Fix size overflow
drm/i915: Fix invalid access to ACPI _DSM objects
drm/amd/display: Add missing mask for DCN3
drm/panel: panel-dsi-cm: disable TE for now
drm/msm/disp/dpu1: program 3d_merge only if block is attached
drm/msm: a6xx: fix version check for the A650 SQE microcode
drm/msm: Fix a5xx/a6xx timestamps
drm/msm: Fix removal of valid error case when checking speed_bin
drm/msm: Set drvdata to NULL when msm_drm_init() fails
drivers: gpu: drm: xen_drm_front_drm_info is declared twice
gpu/xen: Fix a use after free in xen_drm_drv_init
napi_disable() is subject to an hangup, when the threaded
mode is enabled and the napi is under heavy traffic.
If the relevant napi has been scheduled and the napi_disable()
kicks in before the next napi_threaded_wait() completes - so
that the latter quits due to the napi_disable_pending() condition,
the existing code leaves the NAPI_STATE_SCHED bit set and the
napi_disable() loop waiting for such bit will hang.
This patch addresses the issue by dropping the NAPI_STATE_DISABLE
bit test in napi_thread_wait(). The later napi_threaded_poll()
iteration will take care of clearing the NAPI_STATE_SCHED.
This also addresses a related problem reported by Jakub:
before this patch a napi_disable()/napi_enable() pair killed
the napi thread, effectively disabling the threaded mode.
On the patched kernel napi_disable() simply stops scheduling
the relevant thread.
v1 -> v2:
- let the main napi_thread_poll() loop clear the SCHED bit
Reported-by: Jakub Kicinski <kuba@kernel.org>
Fixes: 29863d41bb ("net: implement threaded-able napi poll loop support")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/883923fa22745a9589e8610962b7dc59df09fb1f.1617981844.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ethernet frame length is calculated incorrectly. Depending on
the value of RX_HEAD_PADDING, this may result in ethernet frames
that are too short (cut off at the end), or too long (garbage added
to the end).
Fix by calculating the ethernet frame length correctly. For added
clarity, use the ETH_FCS_LEN constant in the calculation.
Many thanks to Heiner Kallweit for suggesting this solution.
Suggested-by: Heiner Kallweit <hkallweit1@gmail.com>
Fixes: 3e21a10fde ("lan743x: trim all 4 bytes of the FCS; not just 2")
Link: https://lore.kernel.org/lkml/20210408172353.21143-1-TheSven73@gmail.com/
Signed-off-by: Sven Van Asbroeck <thesven73@gmail.com>
Reviewed-by: George McCollister <george.mccollister@gmail.com>
Tested-by: George McCollister <george.mccollister@gmail.com>
Link: https://lore.kernel.org/r/20210409003904.8957-1-TheSven73@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[<vendor>,]nr-gpios property is used by some GPIO drivers[0] to indicate
the number of GPIOs present on a system, not define a GPIO. nr-gpios is
not configured by #gpio-cells and can't be parsed along with other
"*-gpios" properties.
nr-gpios without the "<vendor>," prefix is not allowed by the DT
spec[1], so only add exception for the ",nr-gpios" suffix and let the
error message continue being printed for non-compliant implementations.
[0] nr-gpios is referenced in Documentation/devicetree/bindings/gpio:
- gpio-adnp.txt
- gpio-xgene-sb.txt
- gpio-xlp.txt
- snps,dw-apb-gpio.yaml
[1] Link: cb53a16a1e/schemas/gpio/gpio-consumer.yaml (L20)
Fixes errors such as:
OF: /palmbus@300000/gpio@600: could not find phandle
Fixes: 7f00be96f1 ("of: property: Add device link support for interrupt-parent, dmas and -gpio(s)")
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Cc: Saravana Kannan <saravanak@google.com>
Cc: stable@vger.kernel.org # v5.5+
Link: https://lore.kernel.org/r/20210405222540.18145-1-ilya.lipnitskiy@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
The iio-bindings.txt was converted into two files and merged
at the dt-schema git tree at:
https://github.com/devicetree-org/dt-schema
Yet, some documents still refer to the old file. Fix their
references, in order to point to the right URL.
Fixes: dba91f82d5 ("dt-bindings:iio:iio-binding.txt Drop file as content now in dt-schema")
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/4efd81eca266ca0875d3bf9d1672097444146c69.1617972339.git.mchehab+huawei@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
As documents have been renamed and moved around, their
references will break, but this will be unnoticed, as the
script which checks for it won't handle "../" references.
So, replace them by the full patch.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/68d3a1244119d1f2829c375b0ef554cf348bc89f.1617972339.git.mchehab+huawei@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
- Fix use-after-free in xen.
- Reduce fifo threshold on hvs4 to fix a fifo full error.
- Disable TE support for Droid4 and N950.
- Small compiler fixes.
-----BEGIN PGP SIGNATURE-----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=iots
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2021-04-09' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
drm-misc-fixes for v5.12-rc7:
- Fix use-after-free in xen.
- Reduce fifo threshold on hvs4 to fix a fifo full error.
- Disable TE support for Droid4 and N950.
- Small compiler fixes.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e7647dd9-60c3-9dfd-a377-89d717212e13@linux.intel.com
-----BEGIN PGP SIGNATURE-----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=mGDl
-----END PGP SIGNATURE-----
Merge tag 'selinux-pr-20210409' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux fixes from Paul Moore:
"Three SELinux fixes.
These fix known problems relating to (re)loading SELinux policy or
changing the policy booleans, and pass our test suite without problem"
* tag 'selinux-pr-20210409' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: fix race between old and new sidtab
selinux: fix cond_list corruption when changing booleans
selinux: make nslot handling in avtab more robust
These all look like something we are better off having
than not ...
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmBwfm8PHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpAnMH/Agdkk7vShooa8pWs5JOo45w4DKzzYVPUBbd
7RAXNSFY1sYUA9Sho7QR3hY5eh5qbSr5xS4lGLrQfoyIFM18IDtxYI2DApefJjDf
Te3m4Hknz5j+kft4d+i66/IVOXizqQlo5xlPLNyhdm4sLl36cxeXsowvuY3Y7qnZ
s/d8TBtRTcyQgw5kJN/8eOxahUf60YV/FnP0+yKtA5WK+En+h/RUG6P7t1mXlURQ
stmvx0UKXcvFUhWoTm9LIpI5iLY1cq52Ffmk2O0dCYZmUto+GVSRsTfawAakSHWd
+5a+JZJC4awgowZ5Qi5EURhm42EBOX6pmStoXF+eVKJAjtZM5mw=
=dwOc
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull vdpa/mlx5 fixes from Michael Tsirkin:
"Last minute fixes.
These all look like something we are better off having
than not ..."
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vdpa/mlx5: Fix suspend/resume index restoration
vdpa/mlx5: Fix wrong use of bit numbers
vdpa/mlx5: Retrieve BAR address suitable any function
vdpa/mlx5: Use the correct dma device when registering memory
vdpa/mlx5: should exclude header length and fcs from mtu
This fixes an issue with firmware loading on the TI K3 PRU, fixes
compatibility with GNU binutils for the same and resolves link error
due to a 64-bit division in the Qualcomm PIL info.
It also recognizes Mathieu Poirier as co-maintainer of the remoteproc
and rpmsg subsystems.
-----BEGIN PGP SIGNATURE-----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=DdER
-----END PGP SIGNATURE-----
Merge tag 'rproc-v5.12-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc
Pull remoteproc fixes from Bjorn Andersson:
"This fixes an issue with firmware loading on the TI K3 PRU, fixes
compatibility with GNU binutils for the same and resolves link error
due to a 64-bit division in the Qualcomm PIL info.
It also recognizes Mathieu Poirier as co-maintainer of the remoteproc
and rpmsg subsystems"
* tag 'rproc-v5.12-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc:
remoteproc: pru: Fix firmware loading crashes on K3 SoCs
remoteproc: pru: Fix loading of GNU Binutils ELF
MAINTAINERS: Add co-maintainer for remoteproc/RPMSG subsystems
remoteproc: qcom: pil_info: avoid 64-bit division
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCYHB+3wAKCRCAXGG7T9hj
vktXAQCV+BbqlrLdQwsoWqFCrPB9PLMOsMRw5q9BykUDihscEgD/RwnJlIGGwgvE
MzAcCyXWukL8epStIWbBxTBHM12eJw8=
=7jyu
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.12b-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fix from Juergen Gross:
"A single fix of a 5.12 patch for the rather uncommon problem of
running as a Xen guest with a real time kernel config"
* tag 'for-linus-5.12b-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/evtchn: Change irq_info lock to raw_spinlock_t
Fix a build issue introduced by a previous fix in the ACPI processor
driver (Vitaly Kuznetsov).
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmBwbxsSHHJqd0Byand5
c29ja2kubmV0AAoJEILEb/54YlRxSQ4P/iLqRq8+u/6vNcc7nQXNChGJvybNXrgy
+3lqc6c0DYUsj4KF0CpZnNMKF6V9ig/nCTYFyWrDxdhaKeQuJMxVncfD3iA9ZZ4q
BNwvteNDFaUgyGJyrxvtNKFiWxFv454hM6mn1PU6bE5XBpX1++wRRBIKPY75lWOI
lWgehcwW0lHQUQabvDaC0YYFK3ZxTxz/xiau26ZBtt2QYctC4VkAy3r+RaYnn3ug
6+85rO5TW9Ul/AT3Csx2Xv5CEs15htzcJe0qoMBmCQHctTpObtzcw4+OihY6gBL5
AaeJA0fgOS23G2ZjMbxZre8E9J1HsftWKaj4wBcMqYOwzT20FenrMa18beTRZM9F
n7QHtriR1uaTohA+qMkXn2rOdhYp35jgC8nLfJzmMJWpXxRj4ejtZc+aMS3kuYk+
YT18SDj8KmIxAIgvlqETkOaKtvjPYYnoMh1DWFOf4uWRPsDkGAdo+oWnh8uteWCa
Nfc5COaajdoIswS+U1ExHQ7HbbIg+vAtx0/RD6M3JGp/mlvojo33GuuDrShmFXmO
ZR0DH7GlApvgXAMR+NR60DG8D6xX6Rk7hi6P7hn8b5LOPraspohZehLdFHMlht4n
js0CAWBJhX6SieyT+gQqY+rIEq4johm23EryA3AWVIc0USfiNTdYryl/GsiZ2W9y
BkQX07tSorHX
=Jzzk
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Fix a build issue introduced by a previous fix in the ACPI processor
driver (Vitaly Kuznetsov)"
* tag 'acpi-5.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: processor: Fix build when CONFIG_ACPI_PROCESSOR=m
When we suspend the VM, the VDPA interface will be reset. When the VM is
resumed again, clear_virtqueues() will clear the available and used
indices resulting in hardware virqtqueue objects becoming out of sync.
We can avoid this function alltogether since qemu will clear them if
required, e.g. when the VM went through a reboot.
Moreover, since the hw available and used indices should always be
identical on query and should be restored to the same value same value
for virtqueues that complete in order, we set the single value provided
by set_vq_state(). In get_vq_state() we return the value of hardware
used index.
Fixes: b35ccebe3e ("vdpa/mlx5: Restore the hardware used index after change map")
Fixes: 1a86b377aa ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices")
Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20210408091047.4269-6-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
VIRTIO_F_VERSION_1 is a bit number. Use BIT_ULL() with mask
conditionals.
Also, in mlx5_vdpa_is_little_endian() use BIT_ULL for consistency with
the rest of the code.
Fixes: 1a86b377aa ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices")
Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20210408091047.4269-5-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
struct mlx5_core_dev has a bar_addr field that contains the correct bar
address for the function regardless of whether it is pci function or sub
function. Use it.
Fixes: 1958fc2f07 ("net/mlx5: SF, Add auxiliary device driver")
Signed-off-by: Eli Cohen <elic@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Link: https://lore.kernel.org/r/20210408091047.4269-4-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
In cases where the vdpa instance uses a SF (sub function), the DMA
device is the parent device. Use a function to retrieve the correct DMA
device.
Fixes: 1958fc2f07 ("net/mlx5: SF, Add auxiliary device driver")
Signed-off-by: Eli Cohen <elic@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Link: https://lore.kernel.org/r/20210408091047.4269-3-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
When feature VIRTIO_NET_F_MTU is negotiated on mlx5_vdpa,
22 extra bytes worth of MTU length is shown in guest.
This is because the mlx5_query_port_max_mtu API returns
the "hardware" MTU value, which does not just contain the
Ethernet payload, but includes extra lengths starting
from the Ethernet header up to the FCS altogether.
Fix the MTU so packets won't get dropped silently.
Fixes: 1a86b377aa ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices")
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20210408091047.4269-2-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
drivers/usb/core/hub.c: usb_new_device() contains the following:
/* By default, forbid autosuspend for all devices. It will be
* allowed for hubs during binding.
*/
usb_disable_autosuspend(udev);
So for anything which is not a hub, such as btusb devices, autosuspend is
disabled by default and we must call usb_enable_autosuspend(udev) to
enable it.
This means that the "Fix the autosuspend enable and disable" commit,
which drops the usb_enable_autosuspend() call when the enable_autosuspend
module option is true, is completely wrong, revert it.
This reverts commit 7bd9fb058d.
Cc: Hui Wang <hui.wang@canonical.com>
Fixes: 7bd9fb058d ("Bluetooth: btusb: Fix the autosuspend enable and disable")
Acked-by: Hui Wang <hui.wang@canonical.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----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=rxNZ
-----END PGP SIGNATURE-----
Merge tag '5.12-rc6-smb3' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Three cifs/smb3 fixes, two for stable: a reconnect fix and a fix for
display of devnames with special characters"
* tag '5.12-rc6-smb3' of git://git.samba.org/sfrench/cifs-2.6:
cifs: escape spaces in share names
fs: cifs: Remove unnecessary struct declaration
cifs: On cifs_reconnect, resolve the hostname again.
nlh is being checked for validtity two times when it is dereferenced in
this function. Check for validity again when updating the flags through
nlh pointer to make the dereferencing safe.
CC: <stable@vger.kernel.org>
Addresses-Coverity: ("NULL pointer dereference")
Signed-off-by: Muhammad Usama Anjum <musamaanjum@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Martin Blumenstingl says:
====================
lantiq: GSWIP: two more fixes
after my last patch got accepted and is now in net as commit
3e6fdeb28f ("net: dsa: lantiq_gswip: Let GSWIP automatically set
the xMII clock") [0] some more people from the OpenWrt community
(many thanks to everyone involved) helped test the GSWIP driver: [1]
It turns out that the previous fix does not work for all boards.
There's no regression, but it doesn't fix as many problems as I
thought. This is why two more fixes are needed:
- the first one solves many (four known but probably there are
a few extra hidden ones) reported bugs with the GSWIP where no
traffic would flow. Not all circumstances are fully understood
but testing shows that switching away from PHY auto polling
solves all of them
- while investigating the different problems which are addressed
by the first patch some small issues with the existing code were
found. These are addressed by the second patch
Changes since v1 at [0]:
- Don't configure the link parameters in gswip_phylink_mac_config
(as we're using the "modern" way in gswip_phylink_mac_link_up).
Thanks to Andrew for the hint with the phylink documentation.
- Clarify that GSWIP_MII_CFG_RMII_CLK is ignored by the hardware in
the description of the second patch as suggested by Hauke
- Don't set GSWIP_MII_CFG_RGMII_IBS in the second patch as we don't
have any hardware available for testing this. The patch
description now also reflects this.
- Added Andrew's Reviewed-by to the first patch (thank you!)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
There are a few more bits in the GSWIP_MII_CFG register for which we
did rely on the boot-loader (or the hardware defaults) to set them up
properly.
For some external RMII PHYs we need to select the GSWIP_MII_CFG_RMII_CLK
bit and also we should un-set it for non-RMII PHYs. The
GSWIP_MII_CFG_RMII_CLK bit is ignored for other PHY connection modes.
The GSWIP IP also supports in-band auto-negotiation for RGMII PHYs when
the GSWIP_MII_CFG_RGMII_IBS bit is set. Clear this bit always as there's
no known hardware which uses this (so it is not tested yet).
Clear the xMII isolation bit when set at initialization time if it was
previously set by the bootloader. Not doing so could lead to no traffic
(neither RX nor TX) on a port with this bit set.
While here, also add the GSWIP_MII_CFG_RESET bit. We don't need to
manage it because this bit is self-clearning when set. We still add it
here to get a better overview of the GSWIP_MII_CFG register.
Fixes: 14fceff477 ("net: dsa: Add Lantiq / Intel DSA driver for vrx200")
Cc: stable@vger.kernel.org
Suggested-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
PHY auto polling on the GSWIP hardware can be used so link changes
(speed, link up/down, etc.) can be detected automatically. Internally
GSWIP reads the PHY's registers for this functionality. Based on this
automatic detection GSWIP can also automatically re-configure it's port
settings. Unfortunately this auto polling (and configuration) mechanism
seems to cause various issues observed by different people on different
devices:
- FritzBox 7360v2: the two Gbit/s ports (connected to the two internal
PHY11G instances) are working fine but the two Fast Ethernet ports
(using an AR8030 RMII PHY) are completely dead (neither RX nor TX are
received). It turns out that the AR8030 PHY sets the BMSR_ESTATEN bit
as well as the ESTATUS_1000_TFULL and ESTATUS_1000_XFULL bits. This
makes the PHY auto polling state machine (rightfully?) think that the
established link speed (when the other side is Gbit/s capable) is
1Gbit/s.
- None of the Ethernet ports on the Zyxel P-2812HNU-F1 (two are
connected to the internal PHY11G GPHYs while the other three are
external RGMII PHYs) are working. Neither RX nor TX traffic was
observed. It is not clear which part of the PHY auto polling state-
machine caused this.
- FritzBox 7412 (only one LAN port which is connected to one of the
internal GPHYs running in PHY22F / Fast Ethernet mode) was seeing
random disconnects (link down events could be seen). Sometimes all
traffic would stop after such disconnect. It is not clear which part
of the PHY auto polling state-machine cauased this.
- TP-Link TD-W9980 (two ports are connected to the internal GPHYs
running in PHY11G / Gbit/s mode, the other two are external RGMII
PHYs) was affected by similar issues as the FritzBox 7412 just without
the "link down" events
Switch to software based configuration instead of PHY auto polling (and
letting the GSWIP hardware configure the ports automatically) for the
following link parameters:
- link up/down
- link speed
- full/half duplex
- flow control (RX / TX pause)
After a big round of manual testing by various people (who helped test
this on OpenWrt) it turns out that this fixes all reported issues.
Additionally it can be considered more future proof because any
"quirk" which is implemented for a PHY on the driver side can now be
used with the GSWIP hardware as well because Linux is in control of the
link parameters.
As a nice side-effect this also solves a problem where fixed-links were
not supported previously because we were relying on the PHY auto polling
mechanism, which cannot work for fixed-links as there's no PHY from
where it can read the registers. Configuring the link settings on the
GSWIP ports means that we now use the settings from device-tree also for
ports with fixed-links.
Fixes: 14fceff477 ("net: dsa: Add Lantiq / Intel DSA driver for vrx200")
Fixes: 3e6fdeb28f ("net: dsa: lantiq_gswip: Let GSWIP automatically set the xMII clock")
Cc: stable@vger.kernel.org
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Several bug fixes:
- Regression from the last pull request in cxgb4 related to the ipv6 fixes
- KASAN crasher in rtrs
- oops in hfi1 related to a buggy BIOS
- Userspace could oops qedr's XRC support
- Uninitialized memory when parsing a LS_NLA_TYPE_DGID netlink message
-----BEGIN PGP SIGNATURE-----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=UaHF
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"Nothing very exciting here, just a few small bug fixes. No red flags
for this release have shown up.
- Regression from the last pull request in cxgb4 related to the ipv6
fixes
- KASAN crasher in rtrs
- oops in hfi1 related to a buggy BIOS
- Userspace could oops qedr's XRC support
- Uninitialized memory when parsing a LS_NLA_TYPE_DGID netlink
message"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/addr: Be strict with gid size
RDMA/qedr: Fix kernel panic when trying to access recv_cq
IB/hfi1: Fix probe time panic when AIP is enabled with a buggy BIOS
RDMA/cxgb4: check for ipv6 address properly while destroying listener
RDMA/rtrs-clt: Close rtrs client conn before destroying rtrs clt session files
The Devicetree standard specifies an 8 byte alignment of the FDT.
Code in libfdt expects this alignment for an FDT image in memory.
kmemdup() returns 4 byte alignment on openrisc. Replace kmemdup()
with kmalloc(), align pointer, memcpy() to get proper alignment.
The 4 byte alignment exposed a related bug which triggered a crash
on openrisc with:
commit 79edff1206 ("scripts/dtc: Update to upstream version v1.6.0-51-g183df9e9c2b9")
as reported in:
https://lore.kernel.org/lkml/20210327224116.69309-1-linux@roeck-us.net/
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Link: https://lore.kernel.org/r/20210408204508.2276230-1-frowand.list@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2021-04-08
This series contains updates to i40e and ice drivers.
Grzegorz fixes the ordering of parameters to i40e_aq_get_phy_register()
which is causing incorrect information to be reported.
Arkadiusz fixes various sparse issues reported on the i40e driver.
Yongxin Liu fixes a memory leak with aRFS following resume from suspend
for ice driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
pull-request: bpf 2021-04-08
The following pull-request contains BPF updates for your *net* tree.
We've added 4 non-merge commits during the last 2 day(s) which contain
a total of 4 files changed, 31 insertions(+), 10 deletions(-).
The main changes are:
1) Validate and reject invalid JIT branch displacements, from Piotr Krysiuk.
2) Fix incorrect unhash restore as well as fwd_alloc memory accounting in
sock map, from John Fastabend.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
* S1G beacon validation
* potential leak in nl80211
* fast-RX confusion with 4-addr mode
* erroneous WARN_ON that userspace can trigger
* wrong time units in virt_wifi
* rfkill userspace API breakage
* TXQ AC confusing that led to traffic stopped forever
* connection monitoring time after/before confusion
* netlink beacon head validation buffer overrun
-----BEGIN PGP SIGNATURE-----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=rGEc
-----END PGP SIGNATURE-----
Merge tag 'mac80211-for-net-2021-04-08.2' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes berg says:
====================
Various small fixes:
* S1G beacon validation
* potential leak in nl80211
* fast-RX confusion with 4-addr mode
* erroneous WARN_ON that userspace can trigger
* wrong time units in virt_wifi
* rfkill userspace API breakage
* TXQ AC confusing that led to traffic stopped forever
* connection monitoring time after/before confusion
* netlink beacon head validation buffer overrun
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Setting iftoken can fail for several different reasons but there
and there was no report to user as to the cause. Add netlink
extended errors to the processing of the request.
This requires adding additional argument through rtnl_af_ops
set_link_af callback.
Reported-by: Hongren Zheng <li@zenithal.me>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vlad Buslov says:
====================
Action initalization fixes
This series fixes reference counting of action instances and modules in
several parts of action init code. The first patch reverts previous fix
that didn't properly account for rollback from a failure in the middle of
the loop in tcf_action_init() which is properly fixed by the following
patch.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
With recent changes that separated action module load from action
initialization tcf_action_init() function error handling code was modified
to manually release the loaded modules if loading/initialization of any
further action in same batch failed. For the case when all modules
successfully loaded and some of the actions were initialized before one of
them failed in init handler. In this case for all previous actions the
module will be released twice by the error handler: First time by the loop
that manually calls module_put() for all ops, and second time by the action
destroy code that puts the module after destroying the action.
Reproduction:
$ sudo tc actions add action simple sdata \"2\" index 2
$ sudo tc actions add action simple sdata \"1\" index 1 \
action simple sdata \"2\" index 2
RTNETLINK answers: File exists
We have an error talking to the kernel
$ sudo tc actions ls action simple
total acts 1
action order 0: Simple <"2">
index 2 ref 1 bind 0
$ sudo tc actions flush action simple
$ sudo tc actions ls action simple
$ sudo tc actions add action simple sdata \"2\" index 2
Error: Failed to load TC action module.
We have an error talking to the kernel
$ lsmod | grep simple
act_simple 20480 -1
Fix the issue by modifying module reference counting handling in action
initialization code:
- Get module reference in tcf_idr_create() and put it in tcf_idr_release()
instead of taking over the reference held by the caller.
- Modify users of tcf_action_init_1() to always release the module
reference which they obtain before calling init function instead of
assuming that created action takes over the reference.
- Finally, modify tcf_action_init_1() to not release the module reference
when overwriting existing action as this is no longer necessary since both
upper and lower layers obtain and manage their own module references
independently.
Fixes: d349f99768 ("net_sched: fix RTNL deadlock again caused by request_module()")
Suggested-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
