IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The current code flow is:
1. snd_hdac_device_register()
2. set parameters needed by the hdac driver
3. request_codec_module()
the hdac driver is probed at this point
During boot the codec drivers are not loaded when the hdac device is
registered, it is going to be probed later when loading the codec module,
which point the parameters are set.
On module remove/insert
rmmod snd_sof_pci_intel_tgl
modprobe snd_sof_pci_intel_tgl
The codec module remains loaded and the driver will be probed when the
hdac device is created right away, before the parameters for the driver
has been configured:
1. snd_hdac_device_register()
the hdac driver is probed at this point
2. set parameters needed by the hdac driver
3. request_codec_module()
will be a NOP as the module is already loaded
Move the snd_hdac_device_register() later, to be done right before
requesting the codec module to make sure that the parameters are all set
before the device is created:
1. set parameters needed by the hdac driver
2. snd_hdac_device_register()
3. request_codec_module()
This way at the hdac driver probe all parameters will be set in all cases.
Link: https://github.com/thesofproject/linux/issues/4731
Fixes: a0575b4add21 ("ASoC: hdac_hda: Conditionally register dais for HDMI and Analog")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231207095425.19597-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some platforms doesn't have reference mclk pin to codec,
so set bclk as a clk source for rt5682s codec pll in tdm mode.
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://lore.kernel.org/r/20231206110620.1695591-7-venkataprasad.potturu@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some platforms doesn't have reference mclk pin to codec,
so set bclk as a clk source for rt5682s codec pll in tdm mode.
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://lore.kernel.org/r/20231206110620.1695591-7-venkataprasad.potturu@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Unlike i.MX8MP, i.MX93 has two XCVR interrupts.
Describe the two interrupts for the i.MX93 to fix the following
dt-schema warning:
imx93-11x11-evk.dtb: xcvr@42680000: interrupts: [[0, 203, 4], [0, 204, 4]] is too long
from schema $id: http://devicetree.org/schemas/sound/fsl,xcvr.yaml#
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20231206113047.2240055-1-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
Header alignment with firmware, addition of new token and partial
match filters.
Hookup the CS35L56 DAPM_OUTPUT widgets to a DAPM_SPK widget so
that there is a complete logical path to a speaker.
There is no particular reason to use multiple speaker widgets.
The CS35L56 are designed to work together as a set so they have
all been connected to a single speaker widget.
Instead of a hardcoded list of codec widget names, the code walks
through all the codecs on the dailink and for every cs35l56 it uses
its name prefix to construct the source end of the route. This adds
a small amount of overhead during probe but has the benefit that it
isn't dependent on every system using the same prefixes.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231205135001.2506070-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is a spelling mistake in a dev_err_probe error message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231205101740.2820813-1-colin.i.king@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The RT722 SDCA codec supports 3 data lanes,
lane_control_support property has to be
set to use additional two lanes.
Reviewed-by: Jack Yu <jack580304@gmail.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Chao Song <chao.song@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231204213721.197785-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Buffer flags have been in firmware for ages but were never fully
implemented in the topology/kernel system. This commit finishes off the
implementation.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231204214713.208951-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sof header file requires these struct with 4 byte aligned, so
add same alignment in sof driver definition.
Signed-off-by: Baofeng Tian <baofeng.tian@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231204214713.208951-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We use partial match for connecting DAI link and DAI widget. We need to
use partial match for disconnecting, too.
Fixes: fe88788779fc ("ASoC: SOF: topology: Use partial match for connecting DAI link and DAI widget")
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231204214713.208951-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
'if (!playback)' will not work if the dai is only on capture dai link
or is on more than one playback dai links. Check 'if
(ctx->headset_codec_dev)' instead.
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231204214200.203100-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sof_sdw_rt_sdca_jack_exit() are used by different codecs, and some of
them use the same dai name.
For example, rt712 and rt713 both use "rt712-sdca-aif1" and
sof_sdw_rt_sdca_jack_exit().
As a result, sof_sdw_rt_sdca_jack_exit() will be called twice by
mc_dailink_exit_loop(). Set ctx->headset_codec_dev = NULL; after
put_device(ctx->headset_codec_dev); to avoid ctx->headset_codec_dev
being put twice.
Fixes: 5360c6704638 ("ASoC: Intel: sof_sdw: add rt712 support")
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231204214200.203100-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The drv_name in enumeration table for ALC5682I-VS codec does not match
the board id string in machine driver. Modify the entry of "10EC5682"
to enumerate "RTL5682" as well and remove invalid entry.
Fixes: 88b4d77d6035 ("ASoC: Intel: glk_rt5682_max98357a: support ALC5682I-VS codec")
Reported-by: Curtis Malainey <cujomalainey@chromium.org>
Reviewed-by: Curtis Malainey <cujomalainey@chromium.org>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231204214200.203100-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Many board configs are duplicated since codec and amplifier type are
removed from board quirk. Introduce "rpl_nau8825_def" board to reduce
the number of rpl board configs.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231204214200.203100-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Many board configs are duplicated since codec and amplifier type are
removed from board quirk. Introduce "adl_nau8825_def" board to reduce
the number of adl board configs.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231204214200.203100-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This is a test configuration for UpExtreme with Cirrus Logic
CS35L56-EIGHT-C board.
The codec layout is configured as:
- Link3: CS42L43 Jack
- Link0: 2x CS35L56 Speaker (amps 1 and 2)
- Link1: 2x CS35L56 Speaker (amps 7 and 8)
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231204135614.2169624-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Hans de Goede <hdegoede@redhat.com>:
This takes some of the work done to auto-configure quirks/routing
for ESS83xx codecs by getting the info from ACPI from:
https://github.com/thesofproject/linux/pull/4112
And then builds on top of this to add auto-configuration to
the bytcht_es8316 board driver.
Note compared to the pull-request, which deals with the ES8336, this
series deals with the ES8316 (for which I have several devices to test
on) and this moves handling of the _DSM from the codec driver to
the board driver since with the ES8316 the board driver takes
care of setting up various routes for things like the mic and
speakers.
After this series audio now works properly on a CHT Chuwi Hi12
tablet without needing to add an extra quirk for that model.
This has also been tested on the following devices, where things
are unchanged from before (the ACPI autoconfiguration gives the
same results as the old defaults) :
Onda V80 plus (CHT)
GP-electronic T701 (BYT)
I also tested this on a Nanote UMPC-01, here the _DSM result
for PLATFORM_SPK_TYPE_ARG wrongly returns 1 (mono) while
the device actually has 2 speakers, so this model needs to keep
its DMI quirk.
I don't have an IRBIS NB41 nor a TECLAST X98 Plus II,
so the DMI quirks for those are left in place too on
a better safe then sorry basis.
Add support for querying the same ACPI Device-Specific-Method (DSM) as
Windows uses to determine things like speaker and mic routing.
This avoids the need to add DMI quirks for each new ESS8316 tablet model.
This has been tested on the following devices:
1. Chuwi Hi12 CHT with stereo speakers and IN2-mic-map,
this avoids the need to add a DMI quirk for this model.
2. Nanote UMPC-01 CHT with stereo speakers and IN1-mic-map,
the existing DMI quirk is still necessary because of a bug
in the DSM return values for the speakers (it returns mono).
3. Onda V80 plus CHT with mono speaker and IN1-mic-map,
DSM set quirks match the previously used defaults.
4. GP-electronic T701 BYT with mono speaker and IN2-mic-map,
DSM set quirks match the previously used defaults.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231202123946.54347-5-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a is_bytcr helper variable to probe().
This is a preparation patch for determining the quirks through querying
the ACPI Device-Specific-Method (DSM) on the codec-device.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231202123946.54347-4-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Instead of adding DMI quirks for each new tablet model which uses
the ESS8316 codec, the plan is to switch to querying the same ACPI
Device-Specific-Method (DSM) as Windows uses to determine things
like speaker and mic routing.
Call the new es83xx_dsm_dump() helper which logs various basic settings
which can be queried through the ACPI DSM method on the codec ACPI device,
this is intended to help with developing a DSM based solution to replace
most DMI quirks.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
[hdegoede@redhat.com: improve commit message]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231202123946.54347-3-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Most of the ES83xx codec configuration is exposed in the DSDT table
and accessible via a _DSM method. Start adding basic definitions and
helpers to dump the information.
Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Co-developed-by: David Yang <yangxiaohua@everest-semi.com>
Signed-off-by: David Yang <yangxiaohua@everest-semi.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231202123946.54347-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 014fdeb0d747 ("ASoC: SOF: Move sof_of_machine_select() to
sof-of-dev.c from sof-audio.c") caused a circular dependency between
the snd_sof and snd_sof_of modules:
depmod: ERROR: Cycle detected: snd_sof -> snd_sof_of -> snd_sof
depmod: ERROR: Found 2 modules in dependency cycles!
Move the function back with sof_machine_select().
Fixes: 014fdeb0d747 ("ASoC: SOF: Move sof_of_machine_select() to sof-of-dev.c from sof-audio.c")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Acked-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20231204033549.2020289-1-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Linus Walleij <linus.walleij@linaro.org>:
This series walks over the Cirrus Logic ASoC drivers and
clean out the use of legacy GPIO numbers and legacy
GPIO APIs.
The CS4271 affects an ASoC driver for EP93xx which Nikita is
actively working on moving over to device tree, so I don't
know about that patch specifically, but I think the collision
would be max "the file was deleted".
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
Changes in v2:
- Add explicit <linux/irq.h> include in the cs35l36 driver, apparently
the driver useeed this implicitly through the <linux/gpio.h> include.
- Fix commit messages "gpios" -> "reset" on two patches.
- Test builds OK
- Link to v1: https://lore.kernel.org/r/20231129-descriptors-sound-cirrus-v1-0-31aa74425ff8@linaro.org
---
Linus Walleij (10):
ASoC: cs35l32: Drop legacy include
ASoC: cs35l33: Fix GPIO name and drop legacy include
ASoC: cs35l34: Fix GPIO name and drop legacy include
ASoC: cs35l35: Drop legacy includes
ASoC: cs35l36: Drop legacy includes
ASoC: cs4271: Convert to GPIO descriptors
ASoC: cirrus: edb93xx: Drop legacy include
ASoC: cs42l42: Drop legacy include
ASoC: cs43130: Drop legacy includes
ASoC: cs4349: Drop legacy include
arch/arm/mach-ep93xx/edb93xx.c | 32 +++++++++++++++++++++++++----
arch/arm/mach-ep93xx/vision_ep9307.c | 12 ++++++++++-
include/sound/cs4271.h | 1 -
sound/soc/cirrus/edb93xx.c | 1 -
sound/soc/codecs/cs35l32.c | 1 -
sound/soc/codecs/cs35l33.c | 4 +---
sound/soc/codecs/cs35l34.c | 4 +---
sound/soc/codecs/cs35l35.c | 2 --
sound/soc/codecs/cs35l36.c | 3 +--
sound/soc/codecs/cs4271.c | 39 ++++++++++++------------------------
sound/soc/codecs/cs42l42.c | 1 -
sound/soc/codecs/cs42l42.h | 2 +-
sound/soc/codecs/cs43130.c | 2 --
sound/soc/codecs/cs4349.c | 1 -
14 files changed, 56 insertions(+), 49 deletions(-)
---
base-commit: 267aea213ae042f779a8054401a8a5f301518605
change-id: 20231129-descriptors-sound-cirrus-522d9061808e
Best regards,
--
Linus Walleij <linus.walleij@linaro.org>
Sound machine drivers for all newer Qualcomm SoC platforms are the
exactly same, therefore it makes sense to use same machine driver for
newer platforms as well. Choice of sound topology and user-space Alsa
UCM files depends however on card driver name, which must be customized
per each board. Allow such customization by using driver match data as
sound card driver name.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231201135332.154017-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver includes the legacy GPIO API <linux/gpio.h> but
does not use any symbols from it.
Drop the include.
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231201-descriptors-sound-cirrus-v2-10-ee9f9d4655eb@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver includes the legacy GPIO APIs <linux/gpio.h> and
<linux/of_gpio.h> but does not use any symbols from any of
them.
Drop the includes.
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231201-descriptors-sound-cirrus-v2-9-ee9f9d4655eb@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver includes the legacy GPIO API <linux/gpio.h> but
does not use any symbols from it.
Drop the include.
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231201-descriptors-sound-cirrus-v2-8-ee9f9d4655eb@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This converts the Cirrus CS4271 ASoC codec driver to use
GPIO descriptors.
It turns out that there are two in-kernel users of the platform
data passing mechanism so these are switched over as well.
One locally defined GPIO "gpio_disabled" is declared in the
state struct but completely unused in the driver, so we delete
it.
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231201-descriptors-sound-cirrus-v2-6-ee9f9d4655eb@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver includes the legacy GPIO APIs <linux/gpio.h> and
<linux/of_gpio.h> but does not use any symbols from any of
them.
Drop the includes.
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231201-descriptors-sound-cirrus-v2-5-ee9f9d4655eb@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver includes the legacy GPIO APIs <linux/gpio.h> and
<linux/of_gpio.h> but does not use any symbols from any of
them.
Drop the includes.
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231201-descriptors-sound-cirrus-v2-4-ee9f9d4655eb@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver includes the legacy GPIO APIs <linux/gpio.h> and
<linux/of_gpio.h> but does not use any symbols from any of
them.
Drop the includes.
Further the driver is requesting "reset-gpios" rather than
just "reset" from the GPIO framework. This is wrong because
the gpiolib core will add "-gpios" before processing the
request from e.g. device tree. Drop the suffix.
The last problem means that the optional RESET GPIO has
never been properly retrieved and used even if it existed,
but nobody noticed.
Fixes: c1124c09e103 ("ASoC: cs35l34: Initial commit of the cs35l34 CODEC driver.")
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231201-descriptors-sound-cirrus-v2-3-ee9f9d4655eb@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver includes the legacy GPIO APIs <linux/gpio.h> and
<linux/of_gpio.h> but does not use any symbols from any of
them.
Drop the includes.
Further the driver is requesting "reset-gpios" rather than
just "reset" from the GPIO framework. This is wrong because
the gpiolib core will add "-gpios" before processing the
request from e.g. device tree. Drop the suffix.
The last problem means that the optional RESET GPIO has
never been properly retrieved and used even if it existed,
but nobody noticed.
Fixes: 3333cb7187b9 ("ASoC: cs35l33: Initial commit of the cs35l33 CODEC driver.")
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231201-descriptors-sound-cirrus-v2-2-ee9f9d4655eb@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver includes the legacy GPIO API <linux/gpio.h> but
does not use any symbols from it.
Drop the include.
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231201-descriptors-sound-cirrus-v2-1-ee9f9d4655eb@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
The main aim of the series is to provide a mechanism to fallback to 'older' IPC
versions in case the desired one is missing either a firmware or topology file.
It is going to make the life of users and distributions if we are going to
start transition existing IPC3 platforms to IPC4 (CAVS2.5) and we might have
missed some topology file to convert for example.
In that case the kernel will fallback to IPC3 without audio regression.
To be able to support this we needed to change the probe sequence to know the
topology filename earlier and check if it is present in the filesystem.
No functional changes for now, the default IPC versions have not been changed.
Currently the Qualcomm Soundwire controller in its DAI startup op
allocates the Soundwire stream runtime. This works fine for existing
designs, but has limitations for stream runtimes with multiple
controllers, like upcoming Qualcomm X1E80100 SoC with four WSA8840
speakers on two Soundwire controllers.
When two Soundwire controllers are added to sound card codecs, Soundwire
startup() is called twice, one for each Soundwire controller, and second
execution overwrites what was set before. During shutdown() this causes
double free.
It is expected to have only one Soundwire stream runtime, thus it should
be allocated from SoC soundcard context startup(), not from each
Soundwire startup(). Such way will properly handle both cases: one and
two Soundwire controllers in the stream runtime.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231128165638.757665-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Newer Qualcomm SoC soundcards will need to allocate Soundwire stream
runtime in their startup op. The code will be exactly the same for all
soundcards, so add a helper for that.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231128165638.757665-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
SND_SOC_IMX_RPMSG gained a new dependency and gets selected by SND_SOC_FSL_RPMSG,
which as a result needs to have the same dependency, or produce a build failure
based on that:
WARNING: unmet direct dependencies detected for SND_SOC_IMX_RPMSG
Depends on [n]: SOUND [=y] && SND [=y] && SND_SOC [=y] && SND_IMX_SOC [=y] && RPMSG [=y] && OF [=y] && I2C [=n]
Selected by [y]:
- SND_SOC_FSL_RPMSG [=y] && SOUND [=y] && SND [=y] && SND_SOC [=y] && COMMON_CLK [=y] && RPMSG [=y] && (SND_IMX_SOC [=y] || SND_IMX_SOC [=y]=n) && SND_IMX_SOC [=y]!=n
x86_64-linux-ld: sound/soc/fsl/imx-rpmsg.o: in function `imx_rpmsg_late_probe':
imx-rpmsg.c:(.text+0x11e): undefined reference to `i2c_find_device_by_fwnode'
Fixes: f83d38def6b1 ("ASoC: imx-rpmsg: SND_SOC_IMX_RPMSG should depend on OF and I2C")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20231129113204.2869356-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This module ID will be used for module performance automatic analysis
for different modules, module name, module ID and module instance ID
will be combined as a new generated ID for current module, this ID
will be further used by analysis tools to identify current module.
Take below case as example:
0x030006 gain.11.1
3 is module instance ID, 6 is module ID and gain.11.1 is module name.
For pipeline widget print, keep as it is.
Signed-off-by: Baofeng Tian <baofeng.tian@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Chao Song <chao.song@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20231129122234.14515-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
