IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Make pte_free_tlb() look similar to pXd_free_tlb() family
functions.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
CRSTs always have size of four pages, while 2KB-size page tables
always occupy a single page. Use that information to distinguish
page tables from CRSTs.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Cease using 4KB pages to host two 2KB PTEs. That greatly
simplifies the memory management code at the expense of
page tables memory footprint.
Instead of two PTEs per 4KB page use only upper half of
the parent page for a single PTE. With that the list of
half-used pages pgtable_list becomes unneeded.
Further, the upper byte of the parent page _refcount
counter does not need to be used for fragments tracking
and could be left alone.
Commit 8211dad62798 ("s390: add pte_free_defer() for
pgtables sharing page") introduced the use of PageActive
flag to coordinate a deferred free with 2KB page table
fragments tracking. Since there is no tracking anymore,
there is no need for using PageActive flag.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Rework the way physical pages are set no-dat / dat:
The old way is:
- Rely on that all pages are initially marked "dat"
- Allocate page tables for the kernel mapping
- Enable dat
- Walk the whole kernel mapping and set PG_arch_1 bit in all struct pages
that belong to pages of kernel page tables
- Walk all struct pages and test and clear the PG_arch_1 bit. If the bit is
not set, set the page state to no-dat
- For all subsequent page table allocations, set the page state to dat
(remove the no-dat state) on allocation time
Change this rather complex logic to a simpler approach:
- Set the whole physical memory (all pages) to "no-dat"
- Explicitly set those page table pages to "dat" which are part of the
kernel image (e.g. swapper_pg_dir)
- For all subsequent page table allocations, set the page state to dat
(remove the no-dat state) on allocation time
In result the code is simpler, and this also allows to get rid of one
odd usage of the PG_arch_1 bit.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
In order to be usable for early boot code move the simple
arch_set_page_dat() function to header file, and add its counter-part
arch_set_page_nodat(). Also change the parameters, and the function name
slightly.
This is required since there aren't any struct pages available in early
boot code, and renaming of functions is done to make sure that all users
are converted to the new API.
Instead of a pointer to a struct page a virtual address is passed, and
instead of an order the number of pages for which the page state needs be
set.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
In order to be usable for early boot code move the simple set_page_xxx()
function to header file. Also change the parameters, and the function names
slightly.
This is required since there aren't any struct pages available in early
boot code, and renaming of functions is done to make sure that all users
are converted to the new API.
Instead of a pointer to a struct page a virtual address is passed, and
instead of an order the number of pages for which the page state needs be
set.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The "cmma=" kernel command line parameter needs to be parsed early for
upcoming changes. Therefore move the parsing code.
Note that EX_TABLE handling of cmma_test_essa() needs to be open-coded,
since the early boot code doesn't have infrastructure for handling expected
exceptions.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Cleanup cmma related inline assemblies:
- consolidate inline assemblies
- use symbolic names
- add same white space where missing
- add braces to for-loops which contain a multi-line statement
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
A secure execution (SE, also known as confidential computing)
guest may see asynchronous errors on a crypto firmware queue.
The current implementation to gather information about cards
and queues in ap_queue_info() simple returns if an asynchronous
error is hanging on the firmware queue. If such a situation
happened and it was the only queue visible for a crypto card
within an SE guest, then the card vanished from sysfs as
the AP bus scan function refuses to hold a card without any
type information. As lszcrypt evaluates the sysfs such
a card vanished from the lszcrypt card listing and the
user is baffled and has no way to reset and thus clear the
pending asynchronous error.
This patch improves the named function to also evaluate GR2
of the TAPQ in case of asynchronous error pending. If there
is a not-null value stored in, the info is processed now.
In the end, a queue with pending asynchronous error does not
lead to a vanishing card any more.
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
If a card or a queue is in check-stop state, it can't be used by
applications to perform crypto operations. Applications check the 'online'
sysfs attribute to check if a card or queue is usable.
Report a card or queue as offline in case it is in check-stop state.
Furthermore, don't allow to set a card or queue online, if it is in
check-stop state.
This is similar to when the card or the queue is in deconfigured state,
there it is also reported as being offline, and it can't be set online.
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Use the perf_callchain_user() code as blueprint to also add support for
USER_STACKTRACE. To describe how to use this cite the commit message of the
LoongArch implementation which came with commit 4d7bf939df08 ("LoongArch:
Add USER_STACKTRACE support"), but replace -fno-omit-frame-pointer option
with the s390 specific -mbackchain option:
====================================================================== To
get the best stacktrace output, you can compile your userspace programs
with frame pointers (at least glibc + the app you are tracing).
1, export "CC = gcc -mbackchain";
2, compile your programs with "CC";
3, use uprobe to get stacktrace output.
...
echo 'p:malloc /usr/lib64/libc.so.6:0x0a4704 size=%r2:u64' > uprobe_events
echo 'p:free /usr/lib64/libc.so.6:0x0a4d50 ptr=%r2:u64' >> uprobe_events
echo 'comm == "demo"' > ./events/uprobes/malloc/filter
echo 'comm == "demo"' > ./events/uprobes/free/filter
echo 1 > ./options/userstacktrace
echo 1 > ./options/sym-userobj
...
======================================================================
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Daan De Meyer and Neal Gompa reported that s390 does not support perf user
stack unwinding.
This was never implemented since this requires user space to be compiled
with the -mbackchain compile option, which until now no distribution
did. However this is going to change with Fedora. Therefore provide a
perf_callchain_user() implementation.
Note that due to the way s390 sets up stack frames the provided call chains
can contain invalid values. This is especially true for the first stack
frame, where it is not possible to tell if the return address has been
written to the stack already or not.
Reported-by: Daan De Meyer <daan.j.demeyer@gmail.com>
Reported-by: Neal Gompa <ngompa@fedoraproject.org>
Closes: https://lore.kernel.org/all/CAO8sHcn3+_qrnvp0580aK7jN0Wion5F7KYeBAa4MnCY4mqABPA@mail.gmail.com/
Link: https://lore.kernel.org/all/20231030123558.10816-A-hca@linux.ibm.com
Reviewed-by: Neal Gompa <ngompa@fedoraproject.org>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Fix kernel crash in AP bus code caused by very early invocation of the
config change callback function via SCLP.
After a fresh IML of the machine the crypto cards are still offline and
will get switched online only with activation of any LPAR which has the
card in it's configuration. A crypto card coming online is reported
to the LPAR via SCLP and the AP bus offers a callback function to get
this kind of information. However, it may happen that the callback is
invoked before the AP bus init function is complete. As the callback
triggers a synchronous AP bus scan, the scan may already run but some
internal states are not initialized by the AP bus init function resulting
in a crash like this:
[ 11.635859] Unable to handle kernel pointer dereference in virtual kernel address space
[ 11.635861] Failing address: 0000000000000000 TEID: 0000000000000887
[ 11.635862] Fault in home space mode while using kernel ASCE.
[ 11.635864] AS:00000000894c4007 R3:00000001fece8007 S:00000001fece7800 P:000000000000013d
[ 11.635879] Oops: 0004 ilc:1 [#1] SMP
[ 11.635882] Modules linked in:
[ 11.635884] CPU: 5 PID: 42 Comm: kworker/5:0 Not tainted 6.6.0-rc3-00003-g4dbf7cdc6b42 #12
[ 11.635886] Hardware name: IBM 3931 A01 751 (LPAR)
[ 11.635887] Workqueue: events_long ap_scan_bus
[ 11.635891] Krnl PSW : 0704c00180000000 0000000000000000 (0x0)
[ 11.635895] R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 RI:0 EA:3
[ 11.635897] Krnl GPRS: 0000000001000a00 0000000000000000 0000000000000006 0000000089591940
[ 11.635899] 0000000080000000 0000000000000a00 0000000000000000 0000000000000000
[ 11.635901] 0000000081870c00 0000000089591000 000000008834e4e2 0000000002625a00
[ 11.635903] 0000000081734200 0000038000913c18 000000008834c6d6 0000038000913ac8
[ 11.635906] Krnl Code:>0000000000000000: 0000 illegal
[ 11.635906] 0000000000000002: 0000 illegal
[ 11.635906] 0000000000000004: 0000 illegal
[ 11.635906] 0000000000000006: 0000 illegal
[ 11.635906] 0000000000000008: 0000 illegal
[ 11.635906] 000000000000000a: 0000 illegal
[ 11.635906] 000000000000000c: 0000 illegal
[ 11.635906] 000000000000000e: 0000 illegal
[ 11.635915] Call Trace:
[ 11.635916] [<0000000000000000>] 0x0
[ 11.635918] [<000000008834e4e2>] ap_queue_init_state+0x82/0xb8
[ 11.635921] [<000000008834ba1c>] ap_scan_domains+0x6fc/0x740
[ 11.635923] [<000000008834c092>] ap_scan_adapter+0x632/0x8b0
[ 11.635925] [<000000008834c3e4>] ap_scan_bus+0xd4/0x288
[ 11.635927] [<00000000879a33ba>] process_one_work+0x19a/0x410
[ 11.635930] Discipline DIAG cannot be used without z/VM
[ 11.635930] [<00000000879a3a2c>] worker_thread+0x3fc/0x560
[ 11.635933] [<00000000879aea60>] kthread+0x120/0x128
[ 11.635936] [<000000008792afa4>] __ret_from_fork+0x3c/0x58
[ 11.635938] [<00000000885ebe62>] ret_from_fork+0xa/0x30
[ 11.635942] Last Breaking-Event-Address:
[ 11.635942] [<000000008834c6d4>] ap_wait+0xcc/0x148
This patch improves the ap_bus_force_rescan() function which is
invoked by the config change callback by checking if a first
initial AP bus scan has been done. If not, the force rescan request
is simple ignored. Anyhow it does not make sense to trigger AP bus
re-scans even before the very first bus scan is complete.
Cc: stable@vger.kernel.org
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
This patch introduces some code lines which check
for interrupt support enabled on an AP queue after
a reply has been received. This invocation has been
chosen as there is a good chance to have the queue
empty at that time. As the enablement of the irq
imples a state machine change the queue should not
have any pending requests or unreceived replies.
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
This patch reworks the irq handling and reporting code
for the AP queue interrupt handling to always use the
irq info from the queue status.
Until now the interrupt status of an AP queue was stored
into a bool variable within the ap_queue struct. This
variable was set on a successful interrupt enablement
and cleared with kicking a reset. However, it may be
that the interrupt state is manipulated outband for
example by a hypervisor. This patch removes this variable
and instead the irq bit from the AP queue status which is
always reflecting the current irq state is used.
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Commit 6326c26c1514 ("s390: convert various pgalloc functions
to use ptdescs") missed to convert tlb_remove_table() into
tlb_remove_ptdesc() in few locations.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
vdpa/mlx5:
VHOST_BACKEND_F_ENABLE_AFTER_DRIVER_OK
new maintainer
vdpa:
support for vq descriptor mappings
decouple reset of iotlb mapping from device reset
fixes, cleanups all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmVCUMYPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRp4L0H/RKcnNXPRqzhhBI1XVQ11Z8CO8WjovcmJalu
ADHNEGmvuWnY79fp9eLiZ4iVaTx1qbzqIB5Q500DJ65jh71W7UQ8ww6CGjNUoRGs
Zoe4G09WoOf4bvDZZzVV7ml/AzMdsHWSZK8pxY3QI9CsC9Zfp9hg20QYxPylCqYx
SIJx7w2MkoojfmtOHRx1WUxaQz99yfU4Z0C5PxtRE1HGN6/a1aY0P0CAl5jq8uCK
U5sCRsfCmP7VKlspeEddMiPA35ADbCiysSobCbwGVQEs5cHpMUX7KWa+oV0tF/PY
9uyJb2rJy6zG3tXmL4XNib665ZR86HX6qiWRfm2nBQQStuHaJyg=
=mXgo
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
"vhost,virtio,vdpa: features, fixes, cleanups.
vdpa/mlx5:
- VHOST_BACKEND_F_ENABLE_AFTER_DRIVER_OK
- new maintainer
vdpa:
- support for vq descriptor mappings
- decouple reset of iotlb mapping from device reset
and fixes, cleanups all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (34 commits)
vdpa_sim: implement .reset_map support
vdpa/mlx5: implement .reset_map driver op
vhost-vdpa: clean iotlb map during reset for older userspace
vdpa: introduce .compat_reset operation callback
vhost-vdpa: introduce IOTLB_PERSIST backend feature bit
vhost-vdpa: reset vendor specific mapping to initial state in .release
vdpa: introduce .reset_map operation callback
virtio_pci: add check for common cfg size
virtio-blk: fix implicit overflow on virtio_max_dma_size
virtio_pci: add build offset check for the new common cfg items
virtio: add definition of VIRTIO_F_NOTIF_CONFIG_DATA feature bit
vduse: make vduse_class constant
vhost-scsi: Spelling s/preceeding/preceding/g
virtio: kdoc for struct virtio_pci_modern_device
vdpa: Update sysfs ABI documentation
MAINTAINERS: Add myself as mlx5_vdpa driver
virtio-balloon: correct the comment of virtballoon_migratepage()
mlx5_vdpa: offer VHOST_BACKEND_F_ENABLE_AFTER_DRIVER_OK
vdpa/mlx5: Update cvq iotlb mapping on ASID change
vdpa/mlx5: Make iotlb helper functions more generic
...
The pull request includes a slight change for flexible length of array
in core function.
Kees Cook provides a patch to annotate the array embedded in fw_node
structure referring to structure member for the length of array. The
annotation would be defined by future extension of C compilers, and
used for access bound-check at run-time enabled by UBSAN and
FORTIFY_SOURCE.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQE66IEYNDXNBPeGKSsLtaWM8LwEwUCZUebWgAKCRCsLtaWM8Lw
E9ONAQDJgJrJ8NkA2L/RMq+og3hdz+PFSNgCjLMudpJOzqBr8gD+Mds+Kjkt3PyL
gNeixdoc2H2xaGw+Lij/czASbWiywQ4=
=+/gn
-----END PGP SIGNATURE-----
Merge tag 'firewire-updates-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire update from Takashi Sakamoto:
"A slight change for flexible length of array in core function.
Kees Cook provides a patch to annotate the array embedded in fw_node
structure referring to structure member for the length of array. The
annotation would be defined by future extension of C compilers, and
used for access bound-check at run-time enabled by UBSAN and
FORTIFY_SOURCE"
* tag 'firewire-updates-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: Annotate struct fw_node with __counted_by
adding transfers while in atomic mode), using new helpers (like
devm_clk_get_enabled), new IDs, documentation fixes and additions... you
name it. The core got a memleak fix and better support for nested muxes.
-----BEGIN PGP SIGNATURE-----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=nfX/
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"I2C has largely driver updates for 6.7, i.e. feature additions (like
adding transfers while in atomic mode), using new helpers (like
devm_clk_get_enabled), new IDs, documentation fixes and additions...
you name it.
The core got a memleak fix and better support for nested muxes"
* tag 'i2c-for-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (53 commits)
i2c: s3c2410: make i2c_s3c_irq_nextbyte() void
i2c: qcom-geni: add ACPI device id for sc8180x
Documentation: i2c: add fault code for not supporting 10 bit addresses
i2c: sun6i-p2wi: Prevent potential division by zero
i2c: mux: demux-pinctrl: Convert to use sysfs_emit_at() API
i2c: i801: Use new helper acpi_use_parent_companion
ACPI: Add helper acpi_use_parent_companion
MAINTAINERS: add YAML file for i2c-demux-pinctrl
i2c: core: fix lockdep warning for sparsely nested adapter chain
i2c: axxia: eliminate kernel-doc warnings
dt-bindings: i2c: i2c-demux-pinctrl: Convert to json-schema
i2c: stm32f7: Use devm_clk_get_enabled()
i2c: stm32f4: Use devm_clk_get_enabled()
i2c: stm32f7: add description of atomic in struct stm32f7_i2c_dev
i2c: fix memleak in i2c_new_client_device()
i2c: exynos5: Calculate t_scl_l, t_scl_h according to i2c spec
i2c: i801: Simplify class-based client device instantiation
i2c: exynos5: add support for atomic transfers
i2c: at91-core: Use devm_clk_get_enabled()
eeprom: at24: add ST M24C64-D Additional Write lockable page support
...
- UBI Fastmap improvements
- Minor issues found by static analysis bots in both UBI and UBIFS
- Fix for wrong dentry length UBIFS in fscrypt mode
-----BEGIN PGP SIGNATURE-----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=fJhk
-----END PGP SIGNATURE-----
Merge tag 'ubifs-for-linus-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs
Pull UBI and UBIFS updates from Richard Weinberger:
- UBI Fastmap improvements
- Minor issues found by static analysis bots in both UBI and UBIFS
- Fix for wrong dentry length UBIFS in fscrypt mode
* tag 'ubifs-for-linus-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
ubifs: ubifs_link: Fix wrong name len calculating when UBIFS is encrypted
ubi: block: Fix use-after-free in ubiblock_cleanup
ubifs: fix possible dereference after free
ubi: fastmap: Add control in 'UBI_IOCATT' ioctl to reserve PEBs for filling pools
ubi: fastmap: Add module parameter to control reserving filling pool PEBs
ubi: fastmap: Fix lapsed wear leveling for first 64 PEBs
ubi: fastmap: Get wl PEB even ec beyonds the 'max' if free PEBs are run out
ubi: fastmap: may_reserve_for_fm: Don't reserve PEB if fm_anchor exists
ubi: fastmap: Remove unneeded break condition while filling pools
ubi: fastmap: Wait until there are enough free PEBs before filling pools
ubi: fastmap: Use free pebs reserved for bad block handling
ubi: Replace erase_block() with sync_erase()
ubi: fastmap: Allocate memory with GFP_NOFS in ubi_update_fastmap
ubi: fastmap: erase_block: Get erase counter from wl_entry rather than flash
ubi: fastmap: Fix missed ec updating after erasing old fastmap data block
ubifs: Fix missing error code err
ubifs: Fix memory leak of bud->log_hash
ubifs: Fix some kernel-doc comments
We now include the name of the device in the error message - and also
increment the number of checksum errors on that device.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
- backpointer_not_found() checks backpointers_no_use_write_buffer, no
need to do it inbackpointer_get_key().
- always use backpointer_get_node() for pointers to nodes:
backpointer_get_key() was sometimes returning the key from the root
node unlocked.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We're not supposed to have more than one btree_trans at a time in a
given thread - that causes recursive locking deadlocks.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Split up bch2_journal_write() to simplify locking:
- bch2_journal_write_pick_flush(), which needs j->lock
- bch2_journal_write_prep, which operates on the journal buffer to be
written and will need the upcoming buf_lock for synchronization with
the btree write buffer flush path
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We avoid using standard error codes: private, per-callsite error codes
make debugging easier.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct fw_node.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Cc: linux1394-devel@lists.sourceforge.net
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20230922175334.work.335-kees@kernel.org
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Core:
- handle IBI in the proper order
Drivers:
- cdns: fix status register access
- mipi-i3c-hci: many fixes now that the driver has been actually tested
- svc: many IBI fixes, correct compatible string, fix hot join corner cases
-----BEGIN PGP SIGNATURE-----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=rFcf
-----END PGP SIGNATURE-----
Merge tag 'i3c/for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull i3c updates from Alexandre Belloni:
"There are now more fixes because as stated in my previous pull
request, people now have access to actual hardware.
Core:
- handle IBI in the proper order
Drivers:
- cdns: fix status register access
- mipi-i3c-hci: many fixes now that the driver has been actually
tested
- svc: many IBI fixes, correct compatible string, fix hot join corner
cases"
* tag 'i3c/for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (29 commits)
i3c: master: handle IBIs in order they came
i3c: master: mipi-i3c-hci: Fix a kernel panic for accessing DAT_data.
i3c: master: svc: fix compatibility string mismatch with binding doc
i3c: master: svc: fix random hot join failure since timeout error
i3c: master: svc: fix SDA keep low when polling IBIWON timeout happen
i3c: master: svc: fix check wrong status register in irq handler
i3c: master: svc: fix ibi may not return mandatory data byte
i3c: master: svc: fix wrong data return when IBI happen during start frame
i3c: master: svc: fix race condition in ibi work thread
i3c: Fix typo "Provisional ID" to "Provisioned ID"
i3c: Fix potential refcount leak in i3c_master_register_new_i3c_devs
i3c: mipi-i3c-hci: Resume controller after aborted transfer
i3c: mipi-i3c-hci: Resume controller explicitly
i3c: mipi-i3c-hci: Fix missing xfer->completion in hci_cmd_v1_daa()
i3c: mipi-i3c-hci: Do not unmap region not mapped for transfer
i3c: mipi-i3c-hci: Set number of SW enabled Ring Bundles earlier
i3c: mipi-i3c-hci: Fix race between bus cleanup and interrupt
i3c: mipi-i3c-hci: Set ring start request together with enable
i3c: mipi-i3c-hci: Remove BUG() when Ring Abort request times out
i3c: mipi-i3c-hci: Fix out of bounds access in hci_dma_irq_handler
...
- Add support for RCH (Restricted CXL Host) Error recovery
- Fix several region assembly bugs
- Fix mem-device lifetime issues relative to the sanitize command and
RCH topology.
- Refactor ACPI table parsing for CDAT parsing re-use in preparation for
CXL QOS support.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCZUaowQAKCRDfioYZHlFs
Z75rAP44azzLPwJtva7Ur60KpNsGuoZKhvWWdeI1/zo9k4pHbwEA/Vaf/GGo0U5k
bMkoTmwPTd7YY79B5HNUQSZsqF9wlAc=
=TEQ0
-----END PGP SIGNATURE-----
Merge tag 'cxl-for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull CXL (Compute Express Link) updates from Dan Williams:
"The main new functionality this time is work to allow Linux to
natively handle CXL link protocol errors signalled via PCIe AER for
current generation CXL platforms. This required some enlightenment of
the PCIe AER core to workaround the fact that current generation RCH
(Restricted CXL Host) platforms physically hide topology details and
registers via a mechanism called RCRB (Root Complex Register Block).
The next major highlight is reworks to address bugs in parsing region
configurations for next generation VH (Virtual Host) topologies. The
old broken algorithm is replaced with a simpler one that significantly
increases the number of region configurations supported by Linux. This
is again relevant for error handling so that forward and reverse
address translation of memory errors can be carried out by Linux for
memory regions instantiated by platform firmware.
As for other cross-tree work, the ACPI table parsing code has been
refactored for reuse parsing the "CDAT" structure which is an
ACPI-like data structure that is reported by CXL devices. That work is
in preparation for v6.8 support for CXL QoS. Think of this as dynamic
generation of NUMA node topology information generated by Linux rather
than platform firmware.
Lastly, a number of internal object lifetime issues have been resolved
along with misc. fixes and feature updates (decoders_committed sysfs
ABI).
Summary:
- Add support for RCH (Restricted CXL Host) Error recovery
- Fix several region assembly bugs
- Fix mem-device lifetime issues relative to the sanitize command and
RCH topology.
- Refactor ACPI table parsing for CDAT parsing re-use in preparation
for CXL QOS support"
* tag 'cxl-for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (50 commits)
lib/fw_table: Remove acpi_parse_entries_array() export
cxl/pci: Change CXL AER support check to use native AER
cxl/hdm: Remove broken error path
cxl/hdm: Fix && vs || bug
acpi: Move common tables helper functions to common lib
cxl: Add support for reading CXL switch CDAT table
cxl: Add checksum verification to CDAT from CXL
cxl: Export QTG ids from CFMWS to sysfs as qos_class attribute
cxl: Add decoders_committed sysfs attribute to cxl_port
cxl: Add cxl_decoders_committed() helper
cxl/core/regs: Rework cxl_map_pmu_regs() to use map->dev for devm
cxl/core/regs: Rename phys_addr in cxl_map_component_regs()
PCI/AER: Unmask RCEC internal errors to enable RCH downstream port error handling
PCI/AER: Forward RCH downstream port-detected errors to the CXL.mem dev handler
cxl/pci: Disable root port interrupts in RCH mode
cxl/pci: Add RCH downstream port error logging
cxl/pci: Map RCH downstream AER registers for logging protocol errors
cxl/pci: Update CXL error logging to use RAS register address
PCI/AER: Refactor cper_print_aer() for use by CXL driver module
cxl/pci: Add RCH downstream port AER register discovery
...
BCACHEFS_DEBUG_TRANSACTIONS is useful, but it's too expensive to have on
by default - and it hasn't been coming up in bug reports.
Turn it off by default until we figure out a way to make it cheaper.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
BTREE_INSERT_NOJOURNAL is primarily used for a performance optimization
related to inode updates and fsync - document it.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
rebalance_work entries may refer to entries in the extents btree, which
is a snapshots btree, or they may also refer to entries in the reflink
btree, which is not.
Hence rebalance_work keys may use the snapshot field but it's not
required to be nonzero - add a new btree flag to reflect this.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
When we didn't find anything in the journal that we'd like to use, and
we're forced to use whatever we can find - that entry will have been a
JSET_NO_FLUSH entry with a garbage last_seq value, since it's not
normally used.
Initialize it to something sane, for bch2_fs_journal_start().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Delete the useless check for inum == 0; we'll return -ENOENT without it,
which is what we want.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
- the fsck_err() check for the filesystem being clean was incorrect,
causing us to always fail to delete unlinked inodes
- if a snapshot had been taken, the unlinked inode needs to be
propagated to snapshot leaves so the unlink can happen there - fixed.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The bucket_offset field of bch_backpointer is a 40-bit bitfield, but the
bch2_backpointer_swab() helper uses swab32. This leads to inconsistency
when an on-disk fs is accessed from an opposite endian machine.
As it turns out, we already have an internal swab40() helper that is
used from the bch_alloc_v4 swab callback. Lift it into the backpointers
header file and use it consistently in both places.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
A simple test to populate a filesystem on one CPU architecture and
fsck on an arch of the opposite byte order produces errors related
to the fragmentation LRU. This occurs because the 64-bit
fragmentation_lru field is not byte-order swapped when reads detect
that the on-disk/bset key values were written in opposite byte-order
of the current CPU.
Update the bch2_alloc_v4 swab callback to handle fragmentation_lru
as is done for other multi-byte fields. This doesn't affect existing
filesystems when accessed by CPUs of the same endianness because the
->swab() callback is only called when the bset flags indicate an
endianness mismatch between the CPU and on-disk data.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The bcachefs folio writeback code includes a bio full check as well
as a fixed size check to determine when to split off and submit
writeback I/O. The inclusive check of the latter against the limit
means that writeback can submit slightly prematurely. This is not a
functional problem, but results in unnecessarily split I/Os and
extent merging.
This can be observed with a buffered write sized exactly to the
current maximum value (1MB) and with key_merging_disabled=1. The
latter prevents the merge from the second write such that a
subsequent check of the extent list shows a 1020k extent followed by
a contiguous 4k extent.
The purpose for the fixed size check is also undocumented and
somewhat obscure. Lift this check into a new helper that wraps the
bio check, fix the comparison logic, and add a comment to document
the purpose and how we might improve on this in the future.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Guenter Roeck reports a lockdep splat and DEBUG_OBJECTS_WORK related
warning when bch2_copygc_thread() initializes its rhashtable. The
lockdep splat relates to a warning print caused by the fact that the
rhashtable exists on the stack but is not annotated as so. This is
something that could be addressed by INIT_WORK_ONSTACK(), but
rhashtable doesn't expose that control and probably isnt worth the
churn for just one user. Instead, dynamically allocate the
buckets_in_flight structure and avoid the splat that way.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
A recent bug report uncovered a scenario where a filesystem never
runs with freespace_initialized, and therefore the user observes
significantly degraded write performance by virtue of running the
early bucket allocator. The associated bug aside, the primary cause
of the performance drop in this particular instance is that the
early bucket allocator does not update the allocation cursor. This
means that every allocation walks the alloc btree from the first
bucket of the associated device looking for a bucket marked as free
space.
Update the early allocator code to set the alloc cursor to the last
processed position in the tree, similar to how the freelist
allocator behaves. With the alloc_cursor being updated, the retry
logic also needs to be updated to restart from the beginning of the
device when a free bucket is not available between the cursor and
the end of the device. Track the restart position in a first_bucket
variable to make the code a bit more easily readable and consistent
with the freelist allocator.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
bcachefs had a transient bug where freespace_initialized was not
properly being set, which lead to unexpected use of the early bucket
allocator at runtime. This issue has been fixed, but the existence
of it uncovered a coherency issue in the early bucket allocation
code that is somewhat related to how uncached iterators deal with
the key cache.
The problem itself manifests as occasional failure of generic/113
due to corruption, often seen as a duplicate backpointer or multiple
data types per-bucket error. The immediate cause of the error is a
racing bucket allocation along the lines of the following sequence:
- Task 1 selects key A in bch2_bucket_alloc_early() and schedules.
- Task 2 selects the same key A, but proceeds to complete the
allocation and associated I/O, after which it releases the
open_bucket.
- Task 1 resumes with key A, but does not recognize the bucket is
now allocated because the open_bucket has been removed
from the hash when it was released in the previous step.
This generally shouldn't happen because the allocating task updates
the alloc btree key before releasing the bucket. This is not
sufficient in this particular instance, however, because an uncached
iterator for a cached btree doesn't actually lock the key cache slot
when no key exists for a given slot in the cache. Thus the fact that
the allocation side updates the cached key means that multiple
uncached iters can stumble across the same alloc key and duplicate
the bucket allocation as described above.
This is something that probably needs a longer term fix in the
iterator code. As a short term fix, close the race through explicit
use of a cached iterator for likely allocation candidates. We don't
want to scan the btree with a cached iterator because that would
unnecessarily pollute the cache. This mitigates cache pollution by
primarily scanning the tree with an uncached iterator, but closes
the race by creating a key cache entry for any prospective slot
prior to the bucket allocation attempt (also similar to how
_alloc_freelist() works via try_alloc_bucket()). This survives many
iterations of generic/113 on a kernel hacked to always use the early
bucket allocator.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
