IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
[ Upstream commit b1080c667b3b2c8c38a7fa83ca5567124887abae ]
Two failure patterns are seen randomly when running slub_kunit tests with
CONFIG_SLAB_FREELIST_RANDOM and CONFIG_SLAB_FREELIST_HARDENED enabled.
Pattern 1:
# test_clobber_zone: pass:1 fail:0 skip:0 total:1
ok 1 test_clobber_zone
# test_next_pointer: EXPECTATION FAILED at lib/slub_kunit.c:72
Expected 3 == slab_errors, but
slab_errors == 0 (0x0)
# test_next_pointer: EXPECTATION FAILED at lib/slub_kunit.c:84
Expected 2 == slab_errors, but
slab_errors == 0 (0x0)
# test_next_pointer: pass:0 fail:1 skip:0 total:1
not ok 2 test_next_pointer
In this case, test_next_pointer() overwrites p[s->offset], but the data
at p[s->offset] is already 0x12.
Pattern 2:
ok 1 test_clobber_zone
# test_next_pointer: EXPECTATION FAILED at lib/slub_kunit.c:72
Expected 3 == slab_errors, but
slab_errors == 2 (0x2)
# test_next_pointer: pass:0 fail:1 skip:0 total:1
not ok 2 test_next_pointer
In this case, p[s->offset] has a value other than 0x12, but one of the
expected failures is nevertheless missing.
Invert data instead of writing a fixed value to corrupt the cache data
structures to fix the problem.
Fixes: 1f9f78b1b376 ("mm/slub, kunit: add a KUnit test for SLUB debugging functionality")
Cc: Oliver Glitta <glittao@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
CC: Daniel Latypov <dlatypov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2b3460cbf454c6b03d7429e9ffc4fe09322eb1a9 ]
In spu2_dump_omd() value of ptr is increased by ciph_key_len
instead of hash_iv_len which could lead to going beyond the
buffer boundaries.
Fix this bug by changing ciph_key_len to hash_iv_len.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 9d12ba86f818 ("crypto: brcm - Add Broadcom SPU driver")
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8f27829974b025d4df2e78894105d75e3bf349f0 ]
The original mount API conversion inexplicably left out the change
from ->remount_fs to ->reconfigure; do that now.
Fixes: 7ab2fa7693c3 ("vfs: Convert openpromfs to use the new mount API")
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Link: https://lore.kernel.org/r/90b968aa-c979-420f-ba37-5acc3391b28f@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4efaa5acf0a1d2b5947f98abb3acf8bfd966422b ]
epoll can call out to vfs_poll() with a file pointer that may race with
the last 'fput()'. That would make f_count go down to zero, and while
the ep->mtx locking means that the resulting file pointer tear-down will
be blocked until the poll returns, it means that f_count is already
dead, and any use of it won't actually get a reference to the file any
more: it's dead regardless.
Make sure we have a valid ref on the file pointer before we call down to
vfs_poll() from the epoll routines.
Link: https://lore.kernel.org/lkml/0000000000002d631f0615918f1e@google.com/
Reported-by: syzbot+045b454ab35fd82a35fb@syzkaller.appspotmail.com
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 863fe60ed27f2c85172654a63c5b827e72c8b2e6 ]
On system where native nvme multipath is configured and iopolicy
is set to numa but the nvme controller numa node id is undefined
or -1 (NUMA_NO_NODE) then avoid calculating node distance for
finding optimal io path. In such case we may access numa distance
table with invalid index and that may potentially refer to incorrect
memory. So this patch ensures that if the nvme controller numa node
id is -1 then instead of calculating node distance for finding optimal
io path, we set the numa node distance of such controller to default 10
(LOCAL_DISTANCE).
Link: https://lore.kernel.org/all/20240413090614.678353-1-nilay@linux.ibm.com/
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 02b670c1f88e78f42a6c5aee155c7b26960ca054 ]
The syzbot-reported stack trace from hell in this discussion thread
actually has three nested page faults:
https://lore.kernel.org/r/000000000000d5f4fc0616e816d4@google.com
... and I think that's actually the important thing here:
- the first page fault is from user space, and triggers the vsyscall
emulation.
- the second page fault is from __do_sys_gettimeofday(), and that should
just have caused the exception that then sets the return value to
-EFAULT
- the third nested page fault is due to _raw_spin_unlock_irqrestore() ->
preempt_schedule() -> trace_sched_switch(), which then causes a BPF
trace program to run, which does that bpf_probe_read_compat(), which
causes that page fault under pagefault_disable().
It's quite the nasty backtrace, and there's a lot going on.
The problem is literally the vsyscall emulation, which sets
current->thread.sig_on_uaccess_err = 1;
and that causes the fixup_exception() code to send the signal *despite* the
exception being caught.
And I think that is in fact completely bogus. It's completely bogus
exactly because it sends that signal even when it *shouldn't* be sent -
like for the BPF user mode trace gathering.
In other words, I think the whole "sig_on_uaccess_err" thing is entirely
broken, because it makes any nested page-faults do all the wrong things.
Now, arguably, I don't think anybody should enable vsyscall emulation any
more, but this test case clearly does.
I think we should just make the "send SIGSEGV" be something that the
vsyscall emulation does on its own, not this broken per-thread state for
something that isn't actually per thread.
The x86 page fault code actually tried to deal with the "incorrect nesting"
by having that:
if (in_interrupt())
return;
which ignores the sig_on_uaccess_err case when it happens in interrupts,
but as shown by this example, these nested page faults do not need to be
about interrupts at all.
IOW, I think the only right thing is to remove that horrendously broken
code.
The attached patch looks like the ObviouslyCorrect(tm) thing to do.
NOTE! This broken code goes back to this commit in 2011:
4fc3490114bb ("x86-64: Set siginfo and context on vsyscall emulation faults")
... and back then the reason was to get all the siginfo details right.
Honestly, I do not for a moment believe that it's worth getting the siginfo
details right here, but part of the commit says:
This fixes issues with UML when vsyscall=emulate.
... and so my patch to remove this garbage will probably break UML in this
situation.
I do not believe that anybody should be running with vsyscall=emulate in
2024 in the first place, much less if you are doing things like UML. But
let's see if somebody screams.
Reported-and-tested-by: syzbot+83e7f982ca045ab4405c@syzkaller.appspotmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/CAHk-=wh9D6f7HUkDgZHKmDCHUQmp+Co89GP+b8+z+G56BKeyNg@mail.gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f5b9053398e70a0c10aa9cb4dd5910ab6bc457c5 ]
There is a race condition when re-creating a kfd_process for a process.
This has been observed when a process under the debugger executes
exec(3). In this scenario:
- The process executes exec.
- This will eventually release the process's mm, which will cause the
kfd_process object associated with the process to be freed
(kfd_process_free_notifier decrements the reference count to the
kfd_process to 0). This causes kfd_process_ref_release to enqueue
kfd_process_wq_release to the kfd_process_wq.
- The debugger receives the PTRACE_EVENT_EXEC notification, and tries to
re-enable AMDGPU traps (KFD_IOC_DBG_TRAP_ENABLE).
- When handling this request, KFD tries to re-create a kfd_process.
This eventually calls kfd_create_process and kobject_init_and_add.
At this point the call to kobject_init_and_add can fail because the
old kfd_process.kobj has not been freed yet by kfd_process_wq_release.
This patch proposes to avoid this race by making sure to drain
kfd_process_wq before creating a new kfd_process object. This way, we
know that any cleanup task is done executing when we reach
kobject_init_and_add.
Signed-off-by: Lancelot SIX <lancelot.six@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e8a6a5ad73acbafd98e8fd3f0cbf6e379771bb76 ]
The documentation for device_get_named_child_node() mentions this
important point:
"
The caller is responsible for calling fwnode_handle_put() on the
returned fwnode pointer.
"
Add fwnode_handle_put() to avoid a leaked reference.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426153033.38500-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1dd1eff161bd55968d3d46bc36def62d71fb4785 ]
Currently, the condition "__this_cpu_read(ksoftirqd) == current" is used to
invoke rcu_softirq_qs() in ksoftirqd tasks context for non-RT kernels.
This works correctly as long as the context is actually task context but
this condition is wrong when:
- the current task is ksoftirqd
- the task is interrupted in a RCU read side critical section
- __do_softirq() is invoked on return from interrupt
Syzkaller triggered the following scenario:
-> finish_task_switch()
-> put_task_struct_rcu_user()
-> call_rcu(&task->rcu, delayed_put_task_struct)
-> __kasan_record_aux_stack()
-> pfn_valid()
-> rcu_read_lock_sched()
<interrupt>
__irq_exit_rcu()
-> __do_softirq)()
-> if (!IS_ENABLED(CONFIG_PREEMPT_RT) &&
__this_cpu_read(ksoftirqd) == current)
-> rcu_softirq_qs()
-> RCU_LOCKDEP_WARN(lock_is_held(&rcu_sched_lock_map))
The rcu quiescent state is reported in the rcu-read critical section, so
the lockdep warning is triggered.
Fix this by splitting out the inner working of __do_softirq() into a helper
function which takes an argument to distinguish between ksoftirqd task
context and interrupted context and invoke it from the relevant call sites
with the proper context information and use that for the conditional
invocation of rcu_softirq_qs().
Reported-by: syzbot+dce04ed6d1438ad69656@syzkaller.appspotmail.com
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Zqiang <qiang.zhang1211@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240427102808.29356-1-qiang.zhang1211@gmail.com
Link: https://lore.kernel.org/lkml/8f281a10-b85a-4586-9586-5bbc12dc784f@paulmck-laptop/T/#mea8aba4abfcb97bbf499d169ce7f30c4cff1b0e3
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bda16500dd0b05e2e047093b36cbe0873c95aeae ]
Volume step (dB/step) modification to fix format error
which shown in amixer control.
Signed-off-by: Jack Yu <jack.yu@realtek.com>
Link: https://lore.kernel.org/r/b1f546ad16dc4c7abb7daa7396e8345c@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cebfbc89ae2552dbb58cd9b8206a5c8e0e6301e9 ]
Add vendor clear control register in readable register's
callback function. This prevents an access failure reported
in Intel CI tests.
Signed-off-by: Jack Yu <jack.yu@realtek.com>
Closes: https://github.com/thesofproject/linux/issues/4860
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/6a103ce9134d49d8b3941172c87a7bd4@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 68adb581a39ae63a0ed082c47f01fbbe515efa0e ]
Add MODULE_DEVICE_TABLE(), so the module could be properly autoloaded
based on the alias from of_device_id table.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://msgid.link/r/20240410172615.255424-2-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 306b38e3fa727d22454a148a364123709e356600 ]
Add an optional gpio property to control external CBJ circuits
to avoid some electric noise caused by sleeve/ring2 contacts floating.
Signed-off-by: Derek Fang <derek.fang@realtek.com>
Link: https://msgid.link/r/20240408091057.14165-2-derek.fang@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 103abab975087e1f01b76fcb54c91dbb65dbc249 ]
The codec leaves tie combo jack's sleeve/ring2 to floating status
default. It would cause electric noise while connecting the active
speaker jack during boot or shutdown.
This patch requests a gpio to control the additional jack circuit
to tie the contacts to the ground or floating.
Signed-off-by: Derek Fang <derek.fang@realtek.com>
Link: https://msgid.link/r/20240408091057.14165-1-derek.fang@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7ab681ddedd4b6dd2b047c74af95221c5f827e1d ]
The regulator IRQ helper requires caller to provide pointer to IRQ name
which is kept in memory by caller. All other data passed to the helper
in the regulator_irq_desc structure is copied. This can cause some
confusion and unnecessary complexity.
Make the regulator_irq_helper() to copy also the provided IRQ name
information so caller can discard the name after the call to
regulator_irq_helper() completes.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://msgid.link/r/ZhJMuUYwaZbBXFGP@drtxq0yyyyyyyyyyyyydy-3.rev.dnainternet.fi
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 17c67ed752d6a456602b3dbb25c5ae4d3de5deab ]
Currently, the sud_test expects the emulated syscall to return the
emulated syscall number. This assumption only works on architectures
were the syscall calling convention use the same register for syscall
number/syscall return value. This is not the case for RISC-V and thus
the return value must be also emulated using the provided ucontext.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20231206134438.473166-1-cleger@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2eb9dd497a698dc384c0dd3e0311d541eb2e13dd ]
Otherwise we can end up with a frame on unsuspend where color management
is not applied when userspace has not committed themselves.
Fixes re-applying color management on Steam Deck/Gamescope on S3 resume.
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9ef369973cd2c97cce3388d2c0c7e3c056656e8a ]
The declarations of the tx_rx_evt class and the rdev_set_antenna event
use the wrong order of arguments in the TP_ARGS macro.
Fix the order of arguments in the TP_ARGS macro.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Igor Artemiev <Igor.A.Artemiev@mcst.ru>
Link: https://msgid.link/20240405152431.270267-1-Igor.A.Artemiev@mcst.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 87988a534d8e12f2e6fc01fe63e6c1925dc5307c upstream.
In snd_card_disconnect(), we set card->shutdown flag at the beginning,
call callbacks and do sync for card->power_ref_sleep waiters at the
end. The callback may delete a kctl element, and this can lead to a
deadlock when the device was in the suspended state. Namely:
* A process waits for the power up at snd_power_ref_and_wait() in
snd_ctl_info() or read/write() inside card->controls_rwsem.
* The system gets disconnected meanwhile, and the driver tries to
delete a kctl via snd_ctl_remove*(); it tries to take
card->controls_rwsem again, but this is already locked by the
above. Since the sleeper isn't woken up, this deadlocks.
An easy fix is to wake up sleepers before processing the driver
disconnect callbacks but right after setting the card->shutdown flag.
Then all sleepers will abort immediately, and the code flows again.
So, basically this patch moves the wait_event() call at the right
timing. While we're at it, just to be sure, call wait_event_all()
instead of wait_event(), although we don't use exclusive events on
this queue for now.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218816
Cc: <stable@vger.kernel.org>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20240510101424.6279-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 39381fe7394e5eafac76e7e9367e7351138a29c1 upstream.
The commit 81033c6b584b ("ALSA: core: Warn on empty module")
introduced a WARN_ON() for a NULL module pointer passed at snd_card
object creation, and it also wraps the code around it with '#ifdef
MODULE'. This works in most cases, but the devils are always in
details. "MODULE" is defined when the target code (i.e. the sound
core) is built as a module; but this doesn't mean that the caller is
also built-in or not. Namely, when only the sound core is built-in
(CONFIG_SND=y) while the driver is a module (CONFIG_SND_USB_AUDIO=m),
the passed module pointer is ignored even if it's non-NULL, and
card->module remains as NULL. This would result in the missing module
reference up/down at the device open/close, leading to a race with the
code execution after the module removal.
For addressing the bug, move the assignment of card->module again out
of ifdef. The WARN_ON() is still wrapped with ifdef because the
module can be really NULL when all sound drivers are built-in.
Note that we keep 'ifdef MODULE' for WARN_ON(), otherwise it would
lead to a false-positive NULL module check. Admittedly it won't catch
perfectly, i.e. no check is performed when CONFIG_SND=y. But, it's no
real problem as it's only for debugging, and the condition is pretty
rare.
Fixes: 81033c6b584b ("ALSA: core: Warn on empty module")
Reported-by: Xu Yang <xu.yang_2@nxp.com>
Closes: https://lore.kernel.org/r/20240520170349.2417900-1-xu.yang_2@nxp.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20240522070442.17786-1-tiwai@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 302e9dca8428979c9c99f2dbb44dc1783f5011c3 upstream.
If we somehow attempt to read beyond the directory size, an error
is supposed to be returned.
However, in some cases, read requests do not stop and instead enter
into a loop.
To avoid this, we set the position in the directory to the end.
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 05afeeebcac850a016ec4fb1f681ceda11963562 upstream.
In most cases when adding a cluster to the directory index,
they are placed at the end, and in the bitmap, this cluster corresponds
to the last bit. The new directory size is calculated as follows:
data_size = (u64)(bit + 1) << indx->index_bits;
In the case of reusing a non-final cluster from the index,
data_size is calculated incorrectly, resulting in the directory size
differing from the actual size.
A check for cluster reuse has been added, and the size update is skipped.
Fixes: 82cae269cfa95 ("fs/ntfs3: Add initialization of super block")
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 110b24eb1a749bea3440f3ca2ff890a26179050a upstream.
When counting and checking hard links in an ntfs file record,
struct MFT_REC {
struct NTFS_RECORD_HEADER rhdr; // 'FILE'
__le16 seq; // 0x10: Sequence number for this record.
>> __le16 hard_links; // 0x12: The number of hard links to record.
__le16 attr_off; // 0x14: Offset to attributes.
...
the ntfs3 driver ignored short names (DOS names), causing the link count
to be reduced by 1 and messages to be output to dmesg.
For Windows, such a situation is a minor error, meaning chkdsk does not report
errors on such a volume, and in the case of using the /f switch, it silently
corrects them, reporting that no errors were found. This does not affect
the consistency of the file system.
Nevertheless, the behavior in the ntfs3 driver is incorrect and
changes the content of the file system. This patch should fix that.
PS: most likely, there has been a confusion of concepts
MFT_REC::hard_links and inode::__i_nlink.
Fixes: 82cae269cfa95 ("fs/ntfs3: Add initialization of super block")
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a8948b5450e7c65a3a34ebf4ccfcebc19335d4fb upstream.
Removes the output of this purely informational message from the
kernel buffer:
"ntfs3: Max link count 4000"
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit eb85dace897c5986bc2f36b3c783c6abb8a4292e upstream.
Syzbot has reported a potential hang in nilfs_detach_log_writer() called
during nilfs2 unmount.
Analysis revealed that this is because nilfs_segctor_sync(), which
synchronizes with the log writer thread, can be called after
nilfs_segctor_destroy() terminates that thread, as shown in the call trace
below:
nilfs_detach_log_writer
nilfs_segctor_destroy
nilfs_segctor_kill_thread --> Shut down log writer thread
flush_work
nilfs_iput_work_func
nilfs_dispose_list
iput
nilfs_evict_inode
nilfs_transaction_commit
nilfs_construct_segment (if inode needs sync)
nilfs_segctor_sync --> Attempt to synchronize with
log writer thread
*** DEADLOCK ***
Fix this issue by changing nilfs_segctor_sync() so that the log writer
thread returns normally without synchronizing after it terminates, and by
forcing tasks that are already waiting to complete once after the thread
terminates.
The skipped inode metadata flushout will then be processed together in the
subsequent cleanup work in nilfs_segctor_destroy().
Link: https://lkml.kernel.org/r/20240520132621.4054-4-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+e3973c409251e136fdd0@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=e3973c409251e136fdd0
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Cc: "Bai, Shuangpeng" <sjb7183@psu.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 936184eadd82906992ff1f5ab3aada70cce44cee upstream.
A potential and reproducible race issue has been identified where
nilfs_segctor_sync() would block even after the log writer thread writes a
checkpoint, unless there is an interrupt or other trigger to resume log
writing.
This turned out to be because, depending on the execution timing of the
log writer thread running in parallel, the log writer thread may skip
responding to nilfs_segctor_sync(), which causes a call to schedule()
waiting for completion within nilfs_segctor_sync() to lose the opportunity
to wake up.
The reason why waking up the task waiting in nilfs_segctor_sync() may be
skipped is that updating the request generation issued using a shared
sequence counter and adding an wait queue entry to the request wait queue
to the log writer, are not done atomically. There is a possibility that
log writing and request completion notification by nilfs_segctor_wakeup()
may occur between the two operations, and in that case, the wait queue
entry is not yet visible to nilfs_segctor_wakeup() and the wake-up of
nilfs_segctor_sync() will be carried over until the next request occurs.
Fix this issue by performing these two operations simultaneously within
the lock section of sc_state_lock. Also, following the memory barrier
guidelines for event waiting loops, move the call to set_current_state()
in the same location into the event waiting loop to ensure that a memory
barrier is inserted just before the event condition determination.
Link: https://lkml.kernel.org/r/20240520132621.4054-3-konishi.ryusuke@gmail.com
Fixes: 9ff05123e3bf ("nilfs2: segment constructor")
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Cc: "Bai, Shuangpeng" <sjb7183@psu.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5eefb477d21a26183bc3499aeefa991198315a2d upstream.
Compiling the m68k kernel with support for the ColdFire CPU family fails
with the following error:
In file included from drivers/net/ethernet/smsc/smc91x.c:80:
drivers/net/ethernet/smsc/smc91x.c: In function ‘smc_reset’:
drivers/net/ethernet/smsc/smc91x.h:160:40: error: implicit declaration of function ‘_swapw’; did you mean ‘swap’? [-Werror=implicit-function-declaration]
160 | #define SMC_outw(lp, v, a, r) writew(_swapw(v), (a) + (r))
| ^~~~~~
drivers/net/ethernet/smsc/smc91x.h:904:25: note: in expansion of macro ‘SMC_outw’
904 | SMC_outw(lp, x, ioaddr, BANK_SELECT); \
| ^~~~~~~~
drivers/net/ethernet/smsc/smc91x.c:250:9: note: in expansion of macro ‘SMC_SELECT_BANK’
250 | SMC_SELECT_BANK(lp, 2);
| ^~~~~~~~~~~~~~~
cc1: some warnings being treated as errors
The function _swapw() was removed in commit d97cf70af097 ("m68k: use
asm-generic/io.h for non-MMU io access functions"), but is still used in
drivers/net/ethernet/smsc/smc91x.h.
Use ioread16be() and iowrite16be() to resolve the error.
Cc: stable@vger.kernel.org
Fixes: d97cf70af097 ("m68k: use asm-generic/io.h for non-MMU io access functions")
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240510113054.186648-2-thorsten.blum@toblux.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit df73757cf8f66fa54c4721c53b0916af3c4d9818 upstream.
Fix the following -Wformat-security compile warnings adding missing
format arguments:
latency-collector.c: In function ‘show_available’:
latency-collector.c:938:17: warning: format not a string literal and
no format arguments [-Wformat-security]
938 | warnx(no_tracer_msg);
| ^~~~~
latency-collector.c:943:17: warning: format not a string literal and
no format arguments [-Wformat-security]
943 | warnx(no_latency_tr_msg);
| ^~~~~
latency-collector.c: In function ‘find_default_tracer’:
latency-collector.c:986:25: warning: format not a string literal and
no format arguments [-Wformat-security]
986 | errx(EXIT_FAILURE, no_tracer_msg);
|
^~~~
latency-collector.c: In function ‘scan_arguments’:
latency-collector.c:1881:33: warning: format not a string literal and
no format arguments [-Wformat-security]
1881 | errx(EXIT_FAILURE, no_tracer_msg);
| ^~~~
Link: https://lore.kernel.org/linux-trace-kernel/20240404011009.32945-1-skhan@linuxfoundation.org
Cc: stable@vger.kernel.org
Fixes: e23db805da2df ("tracing/tools: Add the latency-collector to tools directory")
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c2274b908db05529980ec056359fae916939fdaa upstream.
The reader code in rb_get_reader_page() swaps a new reader page into the
ring buffer by doing cmpxchg on old->list.prev->next to point it to the
new page. Following that, if the operation is successful,
old->list.next->prev gets updated too. This means the underlying
doubly-linked list is temporarily inconsistent, page->prev->next or
page->next->prev might not be equal back to page for some page in the
ring buffer.
The resize operation in ring_buffer_resize() can be invoked in parallel.
It calls rb_check_pages() which can detect the described inconsistency
and stop further tracing:
[ 190.271762] ------------[ cut here ]------------
[ 190.271771] WARNING: CPU: 1 PID: 6186 at kernel/trace/ring_buffer.c:1467 rb_check_pages.isra.0+0x6a/0xa0
[ 190.271789] Modules linked in: [...]
[ 190.271991] Unloaded tainted modules: intel_uncore_frequency(E):1 skx_edac(E):1
[ 190.272002] CPU: 1 PID: 6186 Comm: cmd.sh Kdump: loaded Tainted: G E 6.9.0-rc6-default #5 158d3e1e6d0b091c34c3b96bfd99a1c58306d79f
[ 190.272011] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552c-rebuilt.opensuse.org 04/01/2014
[ 190.272015] RIP: 0010:rb_check_pages.isra.0+0x6a/0xa0
[ 190.272023] Code: [...]
[ 190.272028] RSP: 0018:ffff9c37463abb70 EFLAGS: 00010206
[ 190.272034] RAX: ffff8eba04b6cb80 RBX: 0000000000000007 RCX: ffff8eba01f13d80
[ 190.272038] RDX: ffff8eba01f130c0 RSI: ffff8eba04b6cd00 RDI: ffff8eba0004c700
[ 190.272042] RBP: ffff8eba0004c700 R08: 0000000000010002 R09: 0000000000000000
[ 190.272045] R10: 00000000ffff7f52 R11: ffff8eba7f600000 R12: ffff8eba0004c720
[ 190.272049] R13: ffff8eba00223a00 R14: 0000000000000008 R15: ffff8eba067a8000
[ 190.272053] FS: 00007f1bd64752c0(0000) GS:ffff8eba7f680000(0000) knlGS:0000000000000000
[ 190.272057] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 190.272061] CR2: 00007f1bd6662590 CR3: 000000010291e001 CR4: 0000000000370ef0
[ 190.272070] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 190.272073] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 190.272077] Call Trace:
[ 190.272098] <TASK>
[ 190.272189] ring_buffer_resize+0x2ab/0x460
[ 190.272199] __tracing_resize_ring_buffer.part.0+0x23/0xa0
[ 190.272206] tracing_resize_ring_buffer+0x65/0x90
[ 190.272216] tracing_entries_write+0x74/0xc0
[ 190.272225] vfs_write+0xf5/0x420
[ 190.272248] ksys_write+0x67/0xe0
[ 190.272256] do_syscall_64+0x82/0x170
[ 190.272363] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 190.272373] RIP: 0033:0x7f1bd657d263
[ 190.272381] Code: [...]
[ 190.272385] RSP: 002b:00007ffe72b643f8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[ 190.272391] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f1bd657d263
[ 190.272395] RDX: 0000000000000002 RSI: 0000555a6eb538e0 RDI: 0000000000000001
[ 190.272398] RBP: 0000555a6eb538e0 R08: 000000000000000a R09: 0000000000000000
[ 190.272401] R10: 0000555a6eb55190 R11: 0000000000000246 R12: 00007f1bd6662500
[ 190.272404] R13: 0000000000000002 R14: 00007f1bd6667c00 R15: 0000000000000002
[ 190.272412] </TASK>
[ 190.272414] ---[ end trace 0000000000000000 ]---
Note that ring_buffer_resize() calls rb_check_pages() only if the parent
trace_buffer has recording disabled. Recent commit d78ab792705c
("tracing: Stop current tracer when resizing buffer") causes that it is
now always the case which makes it more likely to experience this issue.
The window to hit this race is nonetheless very small. To help
reproducing it, one can add a delay loop in rb_get_reader_page():
ret = rb_head_page_replace(reader, cpu_buffer->reader_page);
if (!ret)
goto spin;
for (unsigned i = 0; i < 1U << 26; i++) /* inserted delay loop */
__asm__ __volatile__ ("" : : : "memory");
rb_list_head(reader->list.next)->prev = &cpu_buffer->reader_page->list;
.. and then run the following commands on the target system:
echo 1 > /sys/kernel/tracing/events/sched/sched_switch/enable
while true; do
echo 16 > /sys/kernel/tracing/buffer_size_kb; sleep 0.1
echo 8 > /sys/kernel/tracing/buffer_size_kb; sleep 0.1
done &
while true; do
for i in /sys/kernel/tracing/per_cpu/*; do
timeout 0.1 cat $i/trace_pipe; sleep 0.2
done
done
To fix the problem, make sure ring_buffer_resize() doesn't invoke
rb_check_pages() concurrently with a reader operating on the same
ring_buffer_per_cpu by taking its cpu_buffer->reader_lock.
Link: https://lore.kernel.org/linux-trace-kernel/20240517134008.24529-3-petr.pavlu@suse.com
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes: 659f451ff213 ("ring-buffer: Add integrity check at end of iter read")
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
[ Fixed whitespace ]
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c71e3a5cffd5309d7f84444df03d5b72600cc417 upstream.
An issue was found on the RTL8125b when transmitting small fragmented
packets, whereby invalid entries were inserted into the transmit ring
buffer, subsequently leading to calls to dma_unmap_single() with a null
address.
This was caused by rtl8169_start_xmit() not noticing changes to nr_frags
which may occur when small packets are padded (to work around hardware
quirks) in rtl8169_tso_csum_v2().
To fix this, postpone inspecting nr_frags until after any padding has been
applied.
Fixes: 9020845fb5d6 ("r8169: improve rtl8169_start_xmit")
Cc: stable@vger.kernel.org
Signed-off-by: Ken Milmore <ken.milmore@gmail.com>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/27ead18b-c23d-4f49-a020-1fc482c5ac95@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit eabb8a9be1e4a12f3bf37ceb7411083e3775672d upstream.
This reverts commit 7274c4147afbf46f45b8501edbdad6da8cd013b9.
Ken reported that RTL8125b can lock up if gro_flush_timeout has the
default value of 20000 and napi_defer_hard_irqs is set to 0.
In this scenario device interrupts aren't disabled, what seems to
trigger some silicon bug under heavy load. I was able to reproduce this
behavior on RTL8168h. Fix this by reverting 7274c4147afb.
Fixes: 7274c4147afb ("r8169: don't try to disable interrupts if NAPI is scheduled already")
Cc: stable@vger.kernel.org
Reported-by: Ken Milmore <ken.milmore@gmail.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/9b5b6f4c-4f54-4b90-b0b3-8d8023c2e780@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 614a19b89ca43449196a8af1afac7d55c6781687 upstream.
There is a scenario when resuming from some power saving states
with no_console_suspend where console output can be generated
before the 8250_bcm7271 driver gets the opportunity to restore
the baud_mux_clk frequency. Since the baud_mux_clk is at its
default frequency at this time the output can be garbled until
the driver gets the opportunity to resume.
Since this is only an issue with console use of the serial port
during that window and the console isn't likely to use baud
rates that require alternate baud_mux_clk frequencies, allow the
driver to select the default_mux_rate if it is accurate enough.
Fixes: 41a469482de2 ("serial: 8250: Add new 8250-core based Broadcom STB driver")
Cc: stable@vger.kernel.org
Signed-off-by: Doug Berger <opendmb@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20240424222559.1844045-1-opendmb@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 008ab3c53bc4f0b2f20013c8f6c204a3203d0b8b upstream.
The "buf" pointer is an array of u16 values. This code should be
using ARRAY_SIZE() (which is 256) instead of sizeof() (which is 512),
otherwise it can the still got out of bounds.
Fixes: c8d2f34ea96e ("speakup: Avoid crash on very long word")
Cc: stable@vger.kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Link: https://lore.kernel.org/r/d16f67d2-fd0a-4d45-adac-75ddd11001aa@moroto.mountain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 70d7f1427afcf7fa2d21cb5a04c6f3555d5b9357 upstream.
The current implementation uses either gsm0_receive() or gsm1_receive()
depending on whether the user configured the mux in basic or advanced
option mode. Both functions share some state values over the same logical
elements of the frame. However, both frame types differ in their nature.
gsm0_receive() uses non-transparency framing, whereas gsm1_receive() uses
transparency mechanism. Switching between both modes leaves the receive
function in an undefined state when done during frame reception.
Fix this by splitting both states. Add gsm0_receive_state_check_and_fix()
and gsm1_receive_state_check_and_fix() to ensure that gsm->state is reset
after a change of gsm->receive.
Note that gsm->state is only accessed in:
- gsm0_receive()
- gsm1_receive()
- gsm_error()
Fixes: e1eaea46bb40 ("tty: n_gsm line discipline")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20240424054842.7741-2-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 47388e807f85948eefc403a8a5fdc5b406a65d5a upstream.
Assuming the following:
- side A configures the n_gsm in basic option mode
- side B sends the header of a basic option mode frame with data length 1
- side A switches to advanced option mode
- side B sends 2 data bytes which exceeds gsm->len
Reason: gsm->len is not used in advanced option mode.
- side A switches to basic option mode
- side B keeps sending until gsm0_receive() writes past gsm->buf
Reason: Neither gsm->state nor gsm->len have been reset after
reconfiguration.
Fix this by changing gsm->count to gsm->len comparison from equal to less
than. Also add upper limit checks against the constant MAX_MRU in
gsm0_receive() and gsm1_receive() to harden against memory corruption of
gsm->len and gsm->mru.
All other checks remain as we still need to limit the data according to the
user configuration and actual payload size.
Reported-by: j51569436@gmail.com
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218708
Tested-by: j51569436@gmail.com
Fixes: e1eaea46bb40 ("tty: n_gsm line discipline")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20240424054842.7741-1-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 455f9075f14484f358b3c1d6845b4a438de198a7 upstream.
When the BIOS configures the architectural TSC-adjust MSRs on secondary
sockets to correct a constant inter-chassis offset, after Linux brings the
cores online, the TSC sync check later resets the core-local MSR to 0,
triggering HPET fallback and leading to performance loss.
Fix this by unconditionally using the initial adjust values read from the
MSRs. Trusting the initial offsets in this architectural mechanism is a
better approach than special-casing workarounds for specific platforms.
Signed-off-by: Daniel J Blueman <daniel@quora.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Steffen Persvold <sp@numascale.com>
Reviewed-by: James Cleverdon <james.cleverdon.external@eviden.com>
Reviewed-by: Dimitri Sivanich <sivanich@hpe.com>
Reviewed-by: Prarit Bhargava <prarit@redhat.com>
Link: https://lore.kernel.org/r/20240419085146.175665-1-daniel@quora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8af2d1ab78f2342f8c4c3740ca02d86f0ebfac5a upstream.
sched_core_share_pid() copies the cookie to userspace with
put_user(id, (u64 __user *)uaddr), expecting 64 bits of space.
The "unsigned long" datatype that is documented in core-scheduling.rst
however is only 32 bits large on 32 bit architectures.
Document "unsigned long long" as the correct data type that is always
64bits large.
This matches what the selftest cs_prctl_test.c has been doing all along.
Fixes: 0159bb020ca9 ("Documentation: Add usecases, design and interface for core scheduling")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/util-linux/df7a25a0-7923-4f8b-a527-5e6f0064074d@t-8ch.de/
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Chris Hyser <chris.hyser@oracle.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240423-core-scheduling-cookie-v1-1-5753a35f8dfc@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 050bf3c793a07f96bd1e2fd62e1447f731ed733b upstream.
When asn1_encode_sequence() fails, WARN is not the correct solution.
1. asn1_encode_sequence() is not an internal function (located
in lib/asn1_encode.c).
2. Location is known, which makes the stack trace useless.
3. Results a crash if panic_on_warn is set.
It is also noteworthy that the use of WARN is undocumented, and it
should be avoided unless there is a carefully considered rationale to
use it.
Replace WARN with pr_err, and print the return value instead, which is
only useful piece of information.
Cc: stable@vger.kernel.org # v5.13+
Fixes: f2219745250f ("security: keys: trusted: use ASN.1 TPM2 key format for the blobs")
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 331f91d86f71d0bb89a44217cc0b2a22810bbd42 upstream.
The IPI buffer location is read from the firmware that we load to the
System Companion Processor, and it's not granted that both the SRAM
(L2TCM) size that is defined in the devicetree node is large enough
for that, and while this is especially true for multi-core SCP, it's
still useful to check on single-core variants as well.
Failing to perform this check may make this driver perform R/W
operations out of the L2TCM boundary, resulting (at best) in a
kernel panic.
To fix that, check that the IPI buffer fits, otherwise return a
failure and refuse to boot the relevant SCP core (or the SCP at
all, if this is single core).
Fixes: 3efa0ea743b7 ("remoteproc/mediatek: read IPI buffer offset from FW")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240321084614.45253-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b2aba15ad6f908d1a620fd97f6af5620c3639742 upstream.
Currently, when kdb is compiled with keyboard support, then we will use
schedule_work() to provoke reset of the keyboard status. Unfortunately
schedule_work() gets called from the kgdboc post-debug-exception
handler. That risks deadlock since schedule_work() is not NMI-safe and,
even on platforms where the NMI is not directly used for debugging, the
debug trap can have NMI-like behaviour depending on where breakpoints
are placed.
Fix this by using the irq work system, which is NMI-safe, to defer the
call to schedule_work() to a point when it is safe to call.
Reported-by: Liuye <liu.yeC@h3c.com>
Closes: https://lore.kernel.org/all/20240228025602.3087748-1-liu.yeC@h3c.com/
Cc: stable@vger.kernel.org
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240424-kgdboc_fix_schedule_work-v2-1-50f5a490aec5@linaro.org
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b791a67f68121d69108640d4a3e591d210ffe850 upstream.
The function ucsi_displayport_work() does not access the
connector, so it also must not acquire the connector lock.
This fixes a potential deadlock scenario:
ucsi_displayport_work() -> lock(&con->lock)
typec_altmode_vdm()
dp_altmode_vdm()
dp_altmode_work()
typec_altmode_enter()
ucsi_displayport_enter() -> lock(&con->lock)
Reported-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Fixes: af8622f6a585 ("usb: typec: ucsi: Support for DisplayPort alt mode")
Cc: stable@vger.kernel.org
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240507134316.161999-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 42316941335644a98335f209daafa4c122f28983 upstream.
The type defined for the BINDER_SET_MAX_THREADS ioctl was changed from
size_t to __u32 in order to avoid incompatibility issues between 32 and
64-bit kernels. However, the internal types used to copy from user and
store the value were never updated. Use u32 to fix the inconsistency.
Fixes: a9350fc859ae ("staging: android: binder: fix BINDER_SET_MAX_THREADS declaration")
Reported-by: Arve Hjønnevåg <arve@android.com>
Cc: stable@vger.kernel.org
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240421173750.3117808-1-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b8d55a90fd55b767c25687747e2b24abd1ef8680 upstream.
Return invalid error code -EINVAL for invalid block id.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c:1183 amdgpu_ras_query_error_status_helper() error: we previously assumed 'info' could be null (see line 1176)
Suggested-by: Hawking Zhang <Hawking.Zhang@amd.com>
Cc: Tao Zhou <tao.zhou1@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Ajay: applied AMDGPU_RAS_BLOCK_COUNT condition to amdgpu_ras_query_error_status()
as amdgpu_ras_query_error_status_helper() not present in v5.15
amdgpu_ras_query_error_status_helper() was introduced in 8cc0f5669eb6]
Signed-off-by: Ajay Kaher <ajay.kaher@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6c41468c7c12d74843bb414fc00307ea8a6318c3 upstream.
When injecting an exception into a vCPU in Real Mode, suppress the error
code by clearing the flag that tracks whether the error code is valid, not
by clearing the error code itself. The "typo" was introduced by recent
fix for SVM's funky Paged Real Mode.
Opportunistically hoist the logic above the tracepoint so that the trace
is coherent with respect to what is actually injected (this was also the
behavior prior to the buggy commit).
Fixes: b97f07458373 ("KVM: x86: determine if an exception has an error code only when injecting it.")
Cc: stable@vger.kernel.org
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230322143300.2209476-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[nsaenz: backport to 5.15.y]
Signed-off-by: Nicolas Saenz Julienne <nsaenz@amazon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Sean Christopherson <seanjc@google.com>
