IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
[ Upstream commit f530ee95b72e77b09c141c4b1a4b94d1199ffbd9 ]
The decompressor has a hard limit on the number of page tables it can
allocate. This limit is defined at compile-time and will cause boot
failure if it is reached.
The kernel is very strict and calculates the limit precisely for the
worst-case scenario based on the current configuration. However, it is
easy to forget to adjust the limit when a new use-case arises. The
worst-case scenario is rarely encountered during sanity checks.
In the case of enabling 5-level paging, a use-case was overlooked. The
limit needs to be increased by one to accommodate the additional level.
This oversight went unnoticed until Aaron attempted to run the kernel
via kexec with 5-level paging and unaccepted memory enabled.
Update wost-case calculations to include 5-level paging.
To address this issue, let's allocate some extra space for page tables.
128K should be sufficient for any use-case. The logic can be simplified
by using a single value for all kernel configurations.
[ Also add a warning, should this memory run low - by Dave Hansen. ]
Fixes: 34bbb0009f3b ("x86/boot/compressed: Enable 5-level paging during decompression stage")
Reported-by: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230915070221.10266-1-kirill.shutemov@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7dcc683db3639eadd11bf0d59a09088a43de5e22 ]
Since debugfs_create_file() returns ERR_PTR and never NULL, use IS_ERR() to
check the return value.
Fixes: 2fcbc569b9f5 ("scsi: lpfc: Make debugfs ktime stats generic for NVME and SCSI")
Fixes: 4c47efc140fa ("scsi: lpfc: Move SCSI and NVME Stats to hardware queue structures")
Fixes: 6a828b0f6192 ("scsi: lpfc: Support non-uniform allocation of MSIX vectors to hardware queues")
Fixes: 95bfc6d8ad86 ("scsi: lpfc: Make FW logging dynamically configurable")
Fixes: 9f77870870d8 ("scsi: lpfc: Add debugfs support for cm framework buffers")
Fixes: c490850a0947 ("scsi: lpfc: Adapt partitioned XRI lists to efficient sharing")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20230906030809.2847970-1-ruanjinjie@huawei.com
Reviewed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7e021da80f48582171029714f8a487347f29dddb ]
Fix to unmount the tracefs if the ftracetest mounted it for recovering
system environment. If the tracefs is already mounted, this does nothing.
Suggested-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/all/29fce076-746c-4650-8358-b4e0fa215cf7@sirena.org.uk/
Fixes: cbd965bde74c ("ftrace/selftests: Return the skip code when tracing directory not configured in kernel")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d0b0822e32dbae80bbcb3cc86f34d28539d913df ]
Since both debugfs_create_dir() and debugfs_create_file() return ERR_PTR
and never NULL, use IS_ERR() instead of checking for NULL.
Fixes: 1e98fb0f9208 ("scsi: qla2xxx: Setup debugfs entries for remote ports")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20230831140930.3166359-1-ruanjinjie@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7583028d359db3cd0072badcc576b4f9455fd27a ]
The timeout arg of usb_bulk_msg() is ms already, which has been converted
to jiffies by msecs_to_jiffies() in usb_start_wait_urb(). So fix the usage
by removing the redundant msecs_to_jiffies() in the macros.
And as Hans suggested, also remove msecs_to_jiffies() for the IDLE_TIMEOUT
macro to make it consistent here and so change IDLE_TIMEOUT to
msecs_to_jiffies(IDLE_TIMEOUT) where it is used.
Fixes: e4f86e437164 ("drm: Add Grain Media GM12U320 driver v2")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230904021421.1663892-1-ruanjinjie@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6bfe3959b0e7a526f5c64747801a8613f002f05a ]
The function btrfs_validate_super() should verify the metadata_uuid in
the provided superblock argument. Because, all its callers expect it to
do that.
Such as in the following stacks:
write_all_supers()
sb = fs_info->super_for_commit;
btrfs_validate_write_super(.., sb)
btrfs_validate_super(.., sb, ..)
scrub_one_super()
btrfs_validate_super(.., sb, ..)
And
check_dev_super()
btrfs_validate_super(.., sb, ..)
However, it currently verifies the fs_info::super_copy::metadata_uuid
instead. Fix this using the correct metadata_uuid in the superblock
argument.
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4844c3664a72d36cc79752cb651c78860b14c240 ]
In some cases, we need to read the FSID from the superblock when the
metadata_uuid is not set, and otherwise, read the metadata_uuid. So,
add a helper.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: 6bfe3959b0e7 ("btrfs: compare the correct fsid/metadata_uuid in btrfs_validate_super")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c2e79e865b87c2920a3cd39de69c35f2bc758a51 ]
This is defined in volumes.c, move the prototype into volumes.h.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: 6bfe3959b0e7 ("btrfs: compare the correct fsid/metadata_uuid in btrfs_validate_super")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0d1c50ac488ebdaeeaea8ed5069f8d435fd485ed ]
Some distributions, like debian, don't link perf with libbfd. Add a
build flag to make this configuration buildable and testable.
This was inspired by:
https://lore.kernel.org/linux-perf-users/20210910102307.2055484-1-tonyg@leastfixedpoint.com/T/#u
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: tony garnock-jones <tonyg@leastfixedpoint.com>
Link: http://lore.kernel.org/lkml/20210910225756.729087-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stable-dep-of: 7822a8913f4c ("perf build: Update build rule for generated files")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 517db3b59537a59f6cc251b1926df93e93bb9c87 ]
Currently all JSONs and the mapfile for an arch are dependencies for
building pmu-events.c
The test JSONs are missing as a dependency, so add them.
Signed-off-by: John Garry <john.garry@huawei.com>
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linuxarm@huawei.com
Link: http://lore.kernel.org/lkml/90094733-741c-50e5-ac7d-f5640b5f0bdd@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stable-dep-of: 7822a8913f4c ("perf build: Update build rule for generated files")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2ec2839a9062db8a592525a3fdabd42dcd9a3a9b ]
v7.2 controller has different ECC level field size and shift in the acc
control register than its predecessor and successor controller. It needs
to be set specifically.
Fixes: decba6d47869 ("mtd: brcmnand: Add v7.2 controller support")
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230706182909.79151-2-william.zhang@broadcom.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 25f97138f8c225dbf365b428a94d7b30a6daefb3 ]
Allow a brcmnand_soc instance to provide a custom set of I/O operations
which we will require when using this driver on a BCMA bus which is not
directly memory mapped I/O. Update the nand_{read,write}_reg accordingly
to use the SoC operations if provided.
To minimize the penalty on other SoCs which do support standard MMIO
accesses, we use a static key which is disabled by default and gets
enabled if a soc implementation does provide I/O operations.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220107184614.2670254-3-f.fainelli@gmail.com
Stable-dep-of: 2ec2839a9062 ("mtd: rawnand: brcmnand: Fix ECC level field setting for v7.2 controller")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4d0fe8c52bb3029d83e323c961221156ab98680b ]
When I register a kset in the following way:
static struct kset my_kset;
kobject_set_name(&my_kset.kobj, "my_kset");
ret = kset_register(&my_kset);
A null pointer dereference exception is occurred:
[ 4453.568337] Unable to handle kernel NULL pointer dereference at \
virtual address 0000000000000028
... ...
[ 4453.810361] Call trace:
[ 4453.813062] kobject_get_ownership+0xc/0x34
[ 4453.817493] kobject_add_internal+0x98/0x274
[ 4453.822005] kset_register+0x5c/0xb4
[ 4453.825820] my_kobj_init+0x44/0x1000 [my_kset]
... ...
Because I didn't initialize my_kset.kobj.ktype.
According to the description in Documentation/core-api/kobject.rst:
- A ktype is the type of object that embeds a kobject. Every structure
that embeds a kobject needs a corresponding ktype.
So add sanity check to make sure kset->kobj.ktype is not NULL.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20230805084114.1298-2-thunder.leizhen@huaweicloud.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9d7531be3085a8f013cf173ccc4e72e3cf493538 ]
Initialise timing struct in cio2_hw_init() to zero in order to avoid a
compiler warning. The warning was a false positive.
Reported-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 801f287c93ff95582b0a2d2163f12870a2f076d4 ]
The function lio_target_nacl_info_show() uses sprintf() in a loop to print
details for every iSCSI connection in a session without checking for the
buffer length. With enough iSCSI connections it's possible to overflow the
buffer provided by configfs and corrupt the memory.
This patch replaces sprintf() with sysfs_emit_at() that checks for buffer
boundries.
Signed-off-by: Konstantin Shelekhin <k.shelekhin@yadro.com>
Link: https://lore.kernel.org/r/20230722152657.168859-2-k.shelekhin@yadro.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ce9daa2efc0872a9a68ea51dc8000df05893ef2e ]
We should verify the bound of the array to assure that host
may not manipulate the index to point past endpoint array.
Signed-off-by: Ma Ke <make_ruc2021@163.com>
Acked-by: Li Yang <leoyang.li@nxp.com>
Link: https://lore.kernel.org/r/20230628081511.186850-1-make_ruc2021@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2e1796fd4904fdd6062a8e4589778ea899ea0c8d ]
It was completely unnecessary to use BUG in buffer_prepare().
Just replace it with an error return. This also fixes a smatch warning:
drivers/media/pci/cx23885/cx23885-video.c:422 buffer_prepare() error: uninitialized symbol 'ret'.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ee630b29ea44d1851bb6c903f400956604834463 ]
BUG_ON is unnecessary here, and in addition it confuses smatch.
Replacing this with an error return help resolve this smatch
warning:
drivers/media/tuners/qt1010.c:350 qt1010_init() error: buffer overflow 'i2c_data' 34 <= 34
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b97719a66970601cd3151a3e2020f4454a1c4ff6 ]
In gl861_i2c_master_xfer, msg is controlled by user. When msg[i].buf
is null and msg[i].len is zero, former checks on msg[i].buf would be
passed. Malicious data finally reach gl861_i2c_master_xfer. If accessing
msg[i].buf[0] without sanity check, null ptr deref would happen.
We add check on msg[i].len to prevent crash.
Similar commit:
commit 0ed554fd769a
("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()")
Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1047f9343011f2cedc73c64829686206a7e9fc3f ]
In az6007_i2c_xfer, msg is controlled by user. When msg[i].buf
is null and msg[i].len is zero, former checks on msg[i].buf would be
passed. Malicious data finally reach az6007_i2c_xfer. If accessing
msg[i].buf[0] without sanity check, null ptr deref would happen.
We add check on msg[i].len to prevent crash.
Similar commit:
commit 0ed554fd769a
("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()")
Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c30411266fd67ea3c02a05c157231654d5a3bdc9 ]
In anysee_master_xfer, msg is controlled by user. When msg[i].buf
is null and msg[i].len is zero, former checks on msg[i].buf would be
passed. Malicious data finally reach anysee_master_xfer. If accessing
msg[i].buf[0] without sanity check, null ptr deref would happen.
We add check on msg[i].len to prevent crash.
Similar commit:
commit 0ed554fd769a
("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()")
Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil: add spaces around +]
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f4ee84f27625ce1fdf41e8483fa0561a1b837d10 ]
In af9005_i2c_xfer, msg is controlled by user. When msg[i].buf
is null and msg[i].len is zero, former checks on msg[i].buf would be
passed. Malicious data finally reach af9005_i2c_xfer. If accessing
msg[i].buf[0] without sanity check, null ptr deref would happen.
We add check on msg[i].len to prevent crash.
Similar commit:
commit 0ed554fd769a
("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()")
Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5ae544d94abc8ff77b1b9bf8774def3fa5689b5b ]
In dw2102_i2c_transfer, msg is controlled by user. When msg[i].buf
is null and msg[i].len is zero, former checks on msg[i].buf would be
passed. Malicious data finally reach dw2102_i2c_transfer. If accessing
msg[i].buf[0] without sanity check, null ptr deref would happen.
We add check on msg[i].len to prevent crash.
Similar commit:
commit 950e252cb469
("[media] dw2102: limit messages to buffer size")
Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7bf744f2de0a848fb1d717f5831b03db96feae89 ]
In af9035_i2c_master_xfer, msg is controlled by user. When msg[i].buf
is null and msg[i].len is zero, former checks on msg[i].buf would be
passed. Malicious data finally reach af9035_i2c_master_xfer. If accessing
msg[i].buf[0] without sanity check, null ptr deref would happen.
We add check on msg[i].len to prevent crash.
Similar commit:
commit 0ed554fd769a
("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()")
Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ moved variable declaration to fix build issues in older kernels - gregkh ]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit afda85b963c12947e298ad85d757e333aa40fd74 ]
If device_register() returns error in ibmebus_bus_init(), name of kobject
which is allocated in dev_set_name() called in device_add() is leaked.
As comment of device_add() says, it should call put_device() to drop
the reference count that was set in device_initialize() when it fails,
so the name can be freed in kobject_cleanup().
Signed-off-by: ruanjinjie <ruanjinjie@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20221110011929.3709774-1-ruanjinjie@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e88076348425b7d0491c8c98d8732a7df8de7aa3 ]
I run a small server that uses external hard drives for backups. The
backup software I use uses ext2 filesystems with 4KiB block size and
the server is running SELinux and therefore relies on xattr. I recently
upgraded the hard drives from 4TB to 12TB models. I noticed that after
transferring some TBs I got a filesystem error "Freeing blocks not in
datazone - block = 18446744071529317386, count = 1" and the backup
process stopped. Trying to fix the fs with e2fsck resulted in a
completely corrupted fs. The error probably came from ext2_free_blocks(),
and because of the large number 18e19 this problem immediately looked
like some kind of integer overflow. Whereas the 4TB fs was about 1e9
blocks, the new 12TB is about 3e9 blocks. So, searching the ext2 code,
I came across the line in fs/ext2/xattr.c:745 where ext2_new_block()
is called and the resulting block number is stored in the variable block
as an int datatype. If a block with a block number greater than
INT32_MAX is returned, this variable overflows and the call to
sb_getblk() at line fs/ext2/xattr.c:750 fails, then the call to
ext2_free_blocks() produces the error.
Signed-off-by: Georg Ottinger <g.ottinger@gmx.at>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20230815100340.22121-1-g.ottinger@gmx.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8b0472b50bcf0f19a5119b00a53b63579c8e1e4d ]
If rddev->raid_disk is greater than mddev->raid_disks, there will be
an out-of-bounds in raid1_remove_disk(). We have already found
similar reports as follows:
1) commit d17f744e883b ("md-raid10: fix KASAN warning")
2) commit 1ebc2cec0b7d ("dm raid: fix KASAN warning in raid5_remove_disk")
Fix this bug by checking whether the "number" variable is
valid.
Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/tencent_0D24426FAC6A21B69AC0C03CE4143A508F09@qq.com
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 03a711d3cb83692733f865312f49e665c49de6de ]
Enable the uart quirks similar to the earlier SoCs. Let's assume we are
likely going to need a k3 specific quirk mask separate from the earlier
SoCs, so let's not start changing the revision register mask at this point.
Note that SYSC_QUIRK_LEGACY_IDLE will be needed until we can remove the
need for pm_runtime_irq_safe() from 8250_omap driver.
Reviewed-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2e63972a2de14482d0eae1a03a73e379f1c3f44c ]
The variable crtc->state->event is often protected by the lock
crtc->dev->event_lock when is accessed. However, it is accessed as a
condition of an if statement in exynos_drm_crtc_atomic_disable() without
holding the lock:
if (crtc->state->event && !crtc->state->active)
However, if crtc->state->event is changed to NULL by another thread right
after the conditions of the if statement is checked to be true, a
null-pointer dereference can occur in drm_crtc_send_vblank_event():
e->pipe = pipe;
To fix this possible null-pointer dereference caused by data race, the
spin lock coverage is extended to protect the if statement as well as the
function call to drm_crtc_send_vblank_event().
Reported-by: BassCheck <bass@buaa.edu.cn>
Link: https://sites.google.com/view/basscheck/home
Signed-off-by: Tuo Li <islituo@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Added relevant link.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 362fa8f6e6a05089872809f4465bab9d011d05b3 ]
This bridge seems to need the HSE packet, otherwise the image is
shifted up and corrupted at the bottom. This makes the bridge
work with Samsung DSIM on i.MX8MM and i.MX8MP.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230615201902.566182-3-marex@denx.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fba360a047d5eeeb9d4b7c3a9b1c8308980ce9a6 ]
While technically some control frames like ACK are shorter and
end after Address 1, such frames shouldn't be forwarded through
wmediumd or similar userspace, so require the full 3-address
header to avoid accessing invalid memory if shorter frames are
passed in.
Reported-by: syzbot+b2645b5bf1512b81fa22@syzkaller.appspotmail.com
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a7ed3465daa240bdf01a5420f64336fee879c09d ]
When compiling with gcc 13 and CONFIG_FORTIFY_SOURCE=y, the following
warning appears:
In function ‘fortify_memcpy_chk’,
inlined from ‘size_entry_mwt’ at net/bridge/netfilter/ebtables.c:2118:2:
./include/linux/fortify-string.h:592:25: error: call to ‘__read_overflow2_field’
declared with attribute warning: detected read beyond size of field (2nd parameter);
maybe use struct_group()? [-Werror=attribute-warning]
592 | __read_overflow2_field(q_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The compiler is complaining:
memcpy(&offsets[1], &entry->watchers_offset,
sizeof(offsets) - sizeof(offsets[0]));
where memcpy reads beyong &entry->watchers_offset to copy
{watchers,target,next}_offset altogether into offsets[]. Silence the
warning by wrapping these three up via struct_group().
Signed-off-by: GONG, Ruiqi <gongruiqi1@huawei.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3a198c95c95da10ad844cbeade2fe40bdf14c411 ]
The following message shows up when compiling with W=1:
In function ‘fortify_memcpy_chk’,
inlined from ‘alx_get_ethtool_stats’ at drivers/net/ethernet/atheros/alx/ethtool.c:297:2:
./include/linux/fortify-string.h:592:4: error: call to ‘__read_overflow2_field’
declared with attribute warning: detected read beyond size of field (2nd parameter);
maybe use struct_group()? [-Werror=attribute-warning]
592 | __read_overflow2_field(q_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In order to get alx stats altogether, alx_get_ethtool_stats() reads
beyond hw->stats.rx_ok. Fix this warning by directly copying hw->stats,
and refactor the unnecessarily complicated BUILD_BUG_ON btw.
Signed-off-by: GONG, Ruiqi <gongruiqi1@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230821013218.1614265-1-gongruiqi@huaweicloud.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5ae4b0d8875caa44946e579420c7fd5740d58653 ]
Errata ERR010450 only shows up if voltage is 1.8V, but if the device is
supplied by 3v3 the errata can be ignored. So let's check for if quirk
SDHCI_QUIRK2_NO_1_8_V is defined or not before limiting the frequency.
Cc: Jim Reinhart <jimr@tekvox.com>
Cc: James Autry <jautry@tekvox.com>
Cc: Matthew Maron <matthewm@tekvox.com>
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Acked-by: Haibo Chen <haibo.chen@nxp.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20230811214853.8623-1-giulio.benetti@benettiengineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 280db21e153d8810ce3b93640c63ae922bcb9e8e ]
Similar to the transmission of TPM responses, also the transmission of TPM
commands may become corrupted. Instead of aborting when detecting such
issues, try resending the command again.
Signed-off-by: Alexander Steffen <Alexander.Steffen@infineon.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9e47a758b70167c9301d2b44d2569f86c7796f2d ]
During NVMeTCP Authentication a controller can trigger a kernel
oops by specifying the 8192 bit Diffie Hellman group and passing
a correctly sized, but zeroed Diffie Hellamn value.
mpi_cmp_ui() was detecting this if the second parameter was 0,
but 1 is passed from dh_is_pubkey_valid(). This causes the null
pointer u->d to be dereferenced towards the end of mpi_cmp_ui()
Signed-off-by: Mark O'Donovan <shiftee@posteo.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1ad8237e971630c66a1a6194491e0837b64d00e0 ]
When compiling with gcc 13.1 and CONFIG_FORTIFY_SOURCE=y,
I've noticed the following:
In function ‘fortify_memcpy_chk’,
inlined from ‘wil_rx_crypto_check_edma’ at drivers/net/wireless/ath/wil6210/txrx_edma.c:566:2:
./include/linux/fortify-string.h:529:25: warning: call to ‘__read_overflow2_field’
declared with attribute warning: detected read beyond size of field (2nd parameter);
maybe use struct_group()? [-Wattribute-warning]
529 | __read_overflow2_field(q_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
where the compiler complains on:
const u8 *pn;
...
pn = (u8 *)&st->ext.pn_15_0;
...
memcpy(cc->pn, pn, IEEE80211_GCMP_PN_LEN);
and:
In function ‘fortify_memcpy_chk’,
inlined from ‘wil_rx_crypto_check’ at drivers/net/wireless/ath/wil6210/txrx.c:684:2:
./include/linux/fortify-string.h:529:25: warning: call to ‘__read_overflow2_field’
declared with attribute warning: detected read beyond size of field (2nd parameter);
maybe use struct_group()? [-Wattribute-warning]
529 | __read_overflow2_field(q_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
where the compiler complains on:
const u8 *pn = (u8 *)&d->mac.pn_15_0;
...
memcpy(cc->pn, pn, IEEE80211_GCMP_PN_LEN);
In both cases, the fortification logic interprets 'memcpy()' as 6-byte
overread of 2-byte field 'pn_15_0' of 'struct wil_rx_status_extension'
and 'pn_15_0' of 'struct vring_rx_mac', respectively. To silence
these warnings, last two fields of the aforementioned structures
are grouped using 'struct_group_attr(pn, __packed' quirk.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230621093711.80118-1-dmantipov@yandex.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dcce94b80a954a8968ff29fafcfb066d6197fa9a ]
When compiling with gcc 13.1 and CONFIG_FORTIFY_SOURCE=y,
I've noticed the following:
In function ‘fortify_memcpy_chk’,
inlined from ‘mwifiex_construct_tdls_action_frame’ at drivers/net/wireless/marvell/mwifiex/tdls.c:765:3,
inlined from ‘mwifiex_send_tdls_action_frame’ at drivers/net/wireless/marvell/mwifiex/tdls.c:856:6:
./include/linux/fortify-string.h:529:25: warning: call to ‘__read_overflow2_field’
declared with attribute warning: detected read beyond size of field (2nd parameter);
maybe use struct_group()? [-Wattribute-warning]
529 | __read_overflow2_field(q_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The compiler actually complains on:
memmove(pos + ETH_ALEN, &mgmt->u.action.category,
sizeof(mgmt->u.action.u.tdls_discover_resp));
and it happens because the fortification logic interprets this
as an attempt to overread 1-byte 'u.action.category' member of
'struct ieee80211_mgmt'. To silence this warning, it's enough
to pass an address of 'u.action' itself instead of an address
of its first member.
This also fixes an improper usage of 'sizeof()'. Since 'skb' is
extended with 'sizeof(mgmt->u.action.u.tdls_discover_resp) + 1'
bytes (where 1 is actually 'sizeof(mgmt->u.action.category)'),
I assume that the same number of bytes should be copied.
Suggested-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230629085115.180499-2-dmantipov@yandex.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 061115fbfb2ce5870c9a004d68dc63138c07c782 ]
Smatch reports:
ath_pci_probe() warn: argument 4 to %lx specifier is cast from pointer
ath_ahb_probe() warn: argument 4 to %lx specifier is cast from pointer
Fix it by modifying %lx to %p in the printk format string.
Note that with this change, the pointer address will be printed as a
hashed value by default. This is appropriate because the kernel
should not leak kernel pointers to user space in an informational
message. If someone wants to see the real address for debugging
purposes, this can be achieved with the no_hash_pointers kernel option.
Signed-off-by: Dongliang Mu <dzm91@hust.edu.cn>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230723040403.296723-1-dzm91@hust.edu.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 810e41cebb6c6e394f2068f839e1a3fc745a5dcc ]
When compiling with gcc 13.1 and CONFIG_FORTIFY_SOURCE=y,
I've noticed the following:
In function ‘fortify_memcpy_chk’,
inlined from ‘ath_tx_complete_aggr’ at drivers/net/wireless/ath/ath9k/xmit.c:556:4,
inlined from ‘ath_tx_process_buffer’ at drivers/net/wireless/ath/ath9k/xmit.c:773:3:
./include/linux/fortify-string.h:529:25: warning: call to ‘__read_overflow2_field’
declared with attribute warning: detected read beyond size of field (2nd parameter);
maybe use struct_group()? [-Wattribute-warning]
529 | __read_overflow2_field(q_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In function ‘fortify_memcpy_chk’,
inlined from ‘ath_tx_count_frames’ at drivers/net/wireless/ath/ath9k/xmit.c:473:3,
inlined from ‘ath_tx_complete_aggr’ at drivers/net/wireless/ath/ath9k/xmit.c:572:2,
inlined from ‘ath_tx_process_buffer’ at drivers/net/wireless/ath/ath9k/xmit.c:773:3:
./include/linux/fortify-string.h:529:25: warning: call to ‘__read_overflow2_field’
declared with attribute warning: detected read beyond size of field (2nd parameter);
maybe use struct_group()? [-Wattribute-warning]
529 | __read_overflow2_field(q_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In both cases, the compiler complains on:
memcpy(ba, &ts->ba_low, WME_BA_BMP_SIZE >> 3);
which is the legal way to copy both 'ba_low' and following 'ba_high'
members of 'struct ath_tx_status' at once (that is, issue one 8-byte
'memcpy()' for two 4-byte fields). Since the fortification logic seems
interprets this trick as an attempt to overread 4-byte 'ba_low', silence
relevant warnings by using the convenient 'struct_group()' quirk.
Suggested-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230620080855.396851-2-dmantipov@yandex.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit babb80b3ecc6f40c962e13c654ebcd27f25ee327 ]
strlcpy() reads the entire source buffer first.
This read may exceed the destination size limit.
This is both inefficient and can lead to linear read
overflows if a source string is not NUL-terminated [1].
In an effort to remove strlcpy() completely [2], replace
strlcpy() here with strscpy().
Direct replacement is safe here since return value of -errno
is used to check for truncation instead of sizeof(dest).
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy
[2] https://github.com/KSPP/linux/issues/89
Signed-off-by: Azeem Shaikh <azeemshaikh38@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 633d76ad01ad0321a1ace3e5cc4fed06753d7ac4 ]
The checks in question were introduced by:
commit 6b4db2e528f6 ("devlink: Fix use-after-free after a failed reload").
That fixed an issue of reload with mlxsw driver.
Back then, that was a valid fix, because there was a limitation
in place that prevented drivers from registering/unregistering params
when devlink instance was registered.
It was possible to do the fix differently by changing drivers to
register/unregister params in appropriate places making sure the ops
operate only on memory which is allocated and initialized. But that,
as a dependency, would require to remove the limitation mentioned above.
Eventually, this limitation was lifted by:
commit 1d18bb1a4ddd ("devlink: allow registering parameters after the instance")
Also, the alternative fix (which also fixed another issue) was done by:
commit 74cbc3c03c82 ("mlxsw: spectrum_acl_tcam: Move devlink param to TCAM code").
Therefore, the checks are no longer relevant. Each driver should make
sure to have the params registered only when the memory the ops
are working with is allocated and initialized.
So remove the checks.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d11a69873d9a7435fe6a48531e165ab80a8b1221 ]
Arm platforms use is_default_overflow_handler() to determine if the
hw_breakpoint code should single-step over the breakpoint trigger or
let the custom handler deal with it.
Since bpf_overflow_handler() currently isn't recognized as a default
handler, attaching a BPF program to a PERF_TYPE_BREAKPOINT event causes
it to keep firing (the instruction triggering the data abort exception
is never skipped). For example:
# bpftrace -e 'watchpoint:0x10000:4:w { print("hit") }' -c ./test
Attaching 1 probe...
hit
hit
[...]
^C
(./test performs a single 4-byte store to 0x10000)
This patch replaces the check with uses_default_overflow_handler(),
which accounts for the bpf_overflow_handler() case by also testing
if one of the perf_event_output functions gets invoked indirectly,
via orig_default_handler.
Signed-off-by: Tomislav Novak <tnovak@meta.com>
Tested-by: Samuel Gosselin <sgosselin@google.com> # arm64
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/linux-arm-kernel/20220923203644.2731604-1-tnovak@fb.com/
Link: https://lore.kernel.org/r/20230605191923.1219974-1-tnovak@meta.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8cf04bb321f036dd2e523e993897e0789bd5265c ]
Linux defaults to picking the non-working ACPI video backlight interface
on the Apple iMac12,1 and iMac12,2.
Add a DMI quirk to pick the working native radeon_bl0 interface instead.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1838
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2753
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0242737dc4eb9f6e9a5ea594b3f93efa0b12f28d ]
Some HiSilicon SMMU PMCG suffers the erratum 162001900 that the PMU
disable control sometimes fail to disable the counters. This will lead
to error or inaccurate data since before we enable the counters the
counter's still counting for the event used in last perf session.
This patch tries to fix this by hardening the global disable process.
Before disable the PMU, writing an invalid event type (0xffff) to
focibly stop the counters. Correspondingly restore each events on
pmu::pmu_enable().
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20230814124012.58013-1-yangyicong@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
