IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
[ Upstream commit 28319d6dc5e2ffefa452c2377dd0f71621b5bff0 ]
RCU Tasks and PID-namespace unshare can interact in do_exit() in a
complicated circular dependency:
1) TASK A calls unshare(CLONE_NEWPID), this creates a new PID namespace
that every subsequent child of TASK A will belong to. But TASK A
doesn't itself belong to that new PID namespace.
2) TASK A forks() and creates TASK B. TASK A stays attached to its PID
namespace (let's say PID_NS1) and TASK B is the first task belonging
to the new PID namespace created by unshare() (let's call it PID_NS2).
3) Since TASK B is the first task attached to PID_NS2, it becomes the
PID_NS2 child reaper.
4) TASK A forks() again and creates TASK C which get attached to PID_NS2.
Note how TASK C has TASK A as a parent (belonging to PID_NS1) but has
TASK B (belonging to PID_NS2) as a pid_namespace child_reaper.
5) TASK B exits and since it is the child reaper for PID_NS2, it has to
kill all other tasks attached to PID_NS2, and wait for all of them to
die before getting reaped itself (zap_pid_ns_process()).
6) TASK A calls synchronize_rcu_tasks() which leads to
synchronize_srcu(&tasks_rcu_exit_srcu).
7) TASK B is waiting for TASK C to get reaped. But TASK B is under a
tasks_rcu_exit_srcu SRCU critical section (exit_notify() is between
exit_tasks_rcu_start() and exit_tasks_rcu_finish()), blocking TASK A.
8) TASK C exits and since TASK A is its parent, it waits for it to reap
TASK C, but it can't because TASK A waits for TASK B that waits for
TASK C.
Pid_namespace semantics can hardly be changed at this point. But the
coverage of tasks_rcu_exit_srcu can be reduced instead.
The current task is assumed not to be concurrently reapable at this
stage of exit_notify() and therefore tasks_rcu_exit_srcu can be
temporarily relaxed without breaking its constraints, providing a way
out of the deadlock scenario.
[ paulmck: Fix build failure by adding additional declaration. ]
Fixes: 3f95aa81d265 ("rcu: Make TASKS_RCU handle tasks that are almost done exiting")
Reported-by: Pengfei Xu <pengfei.xu@intel.com>
Suggested-by: Boqun Feng <boqun.feng@gmail.com>
Suggested-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Suggested-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Eric W . Biederman <ebiederm@xmission.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 44757092958bdd749775022f915b7ac974384c2a ]
Ever since the following commit:
5a41344a3d83 ("srcu: Simplify __srcu_read_unlock() via this_cpu_dec()")
SRCU doesn't rely anymore on preemption to be disabled in order to
modify the per-CPU counter. And even then it used to be done from the API
itself.
Therefore and after checking further, it appears to be safe to remove
the preemption disablement around __srcu_read_[un]lock() in
exit_tasks_rcu_start() and exit_tasks_rcu_finish()
Suggested-by: Boqun Feng <boqun.feng@gmail.com>
Suggested-by: Paul E. McKenney <paulmck@kernel.org>
Suggested-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Stable-dep-of: 28319d6dc5e2 ("rcu-tasks: Fix synchronize_rcu_tasks() VS zap_pid_ns_processes()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e4e1e8089c5fd948da12cb9f4adc93821036945f ]
Make sure we don't need to look again into the depths of git blame in
order not to miss a subtle part about how rcu-tasks is dealing with
exiting tasks.
Suggested-by: Boqun Feng <boqun.feng@gmail.com>
Suggested-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Suggested-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Stable-dep-of: 28319d6dc5e2 ("rcu-tasks: Fix synchronize_rcu_tasks() VS zap_pid_ns_processes()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 47904aed898a08f028572b9b5a5cc101ddfb2d82 ]
The type of member ->irqs_sum is unsigned long, but kstat_cpu_irqs_sum()
returns int, which can result in truncation. Therefore, change the
kstat_cpu_irqs_sum() function's return value to unsigned long to avoid
truncation.
Fixes: f2c66cd8eedd ("/proc/stat: scalability of irq num per cpu")
Reported-by: Elliott, Robert (Servers) <elliott@hpe.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: Josh Don <joshdon@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e1d9148582ab2c3dada5c5cf8ca7531ca269fee5 ]
Microsoft introduced support in Windows XP for blocking port I/O
to various regions. For Windows compatibility ACPICA has adopted
the same protections and will disallow writes to those
(presumably) the same regions.
On some systems the AML included with the firmware will issue 4 byte
long writes to 0x80. These writes aren't making it over because of this
blockage. The first 4 byte write attempt is rejected, and then
subsequently 1 byte at a time each offset is tried. The first at 0x80
works, but then the next 3 bytes are rejected.
This manifests in bizarre failures for devices that expected the AML to
write all 4 bytes. Trying the same AML on Windows 10 or 11 doesn't hit
this failure and all 4 bytes are written.
Either some of these regions were wrong or some point after Windows XP
some of these regions blocks have been lifted.
In the last 15 years there doesn't seem to be any reports popping up of
this error in the Windows event viewer anymore. There is no documentation
at Microsoft's developer site indicating that Windows ACPI interpreter
blocks these regions. Between the lack of documentation and the fact that
the writes actually do work in Windows 10 and 11, it's quite likely
Windows doesn't actually enforce this anymore.
So to help the issue, only enforce Windows XP specific entries if the
latest _OSI supported is Windows XP. Continue to enforce the
ALWAYS_ILLEGAL entries.
Link: https://github.com/acpica/acpica/pull/817
Fixes: 7f0719039085 ("ACPICA: New: I/O port protection")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 116db2704c193fff6d73ea6c2219625f0c9bdfc8 ]
The key can be unaligned, so use the unaligned memory access helpers.
Fixes: 8ceee72808d1 ("crypto: ghash-clmulni-intel - use C implementation for setkey()")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 44bacbdf9066c590423259dbd6d520baac99c1a8 ]
It is not allowed to call kfree_skb() from hardware interrupt
context or with interrupts being disabled. So replace kfree_skb()
with dev_kfree_skb_irq() under spin_lock_irqsave(). Compile
tested only.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221207150453.114742-1-yangyingliang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 708a49a64237f19bd404852f297aaadbc9e7fee0 ]
It is not allowed to call kfree_skb() from hardware interrupt
context or with interrupts being disabled. So replace kfree_skb()
with dev_kfree_skb_irq() under spin_lock_irqsave(). Compile
tested only.
Fixes: f52b041aed77 ("libertas: Add spinlock to avoid race condition")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221207150008.111743-5-yangyingliang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f393df151540bf858effbd29ff572ab94e76a4c4 ]
It is not allowed to call kfree_skb() from hardware interrupt
context or with interrupts being disabled. So replace kfree_skb()
with dev_kfree_skb_irq() under spin_lock_irqsave(). Compile
tested only.
Fixes: d2e7b3425c47 ("libertas: disable functionality when interface is down")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221207150008.111743-4-yangyingliang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3968e81ba644f10a7d45bae2539560db9edac501 ]
It is not allowed to call kfree_skb() from hardware interrupt
context or with interrupts being disabled. So replace kfree_skb()
with dev_kfree_skb_irq() under spin_lock_irqsave(). Compile
tested only.
Fixes: a3128feef6d5 ("libertas: use irqsave() in USB's complete callback")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221207150008.111743-3-yangyingliang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9388ce97b98216833c969191ee6df61a7201d797 ]
It is not allowed to call kfree_skb() from hardware interrupt
context or with interrupts being disabled. So replace kfree_skb()
with dev_kfree_skb_irq() under spin_lock_irqsave(). Compile
tested only.
Fixes: fc75122fabb5 ("libertas_tf: use irqsave() in USB's complete callback")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221207150008.111743-2-yangyingliang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b9f420032f2ba1e634b22ca7b433e5c40ea663af ]
After the DMA buffer is mapped to a physical address, address is stored
in pktids in brcmf_msgbuf_alloc_pktid(). Then, pktids is parsed in
brcmf_msgbuf_get_pktid()/brcmf_msgbuf_release_array() to obtain physaddr
and later unmap the DMA buffer. But when count is always equal to
pktids->array_size, physaddr isn't stored in pktids and the DMA buffer
will not be unmapped anyway.
Fixes: 9a1bb60250d2 ("brcmfmac: Adding msgbuf protocol.")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221207013114.1748936-1-shaozhengchao@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 212fde3fe76e962598ce1d47b97cc78afdfc71b3 ]
The brcmf_netdev_start_xmit() returns NETDEV_TX_OK without freeing skb
in case of pskb_expand_head() fails, add dev_kfree_skb() to fix it.
Compile tested only.
Fixes: 270a6c1f65fe ("brcmfmac: rework headroom check in .start_xmit()")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/1668684782-47422-1-git-send-email-zhangchangzhong@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9fe21dc626117fb44a8eb393713a86a620128ce3 ]
In the error path of ipw_wdev_init(), exception value is returned, and
the memory applied for in the function is not released. Also the memory
is not released in ipw_pci_probe(). As a result, memory leakage occurs.
So memory release needs to be added to the error path of ipw_wdev_init().
Fixes: a3caa99e6c68 ("libipw: initiate cfg80211 API conversion (v2)")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221209012422.182669-1-shaozhengchao@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 45fc6d7461f18df2f238caf0cbc5acc4163203d1 ]
It is not allowed to call kfree_skb() or consume_skb() from hardware
interrupt context or with hardware interrupts being disabled.
It should use dev_kfree_skb_irq() or dev_consume_skb_irq() instead.
The difference between them is free reason, dev_kfree_skb_irq() means
the SKB is dropped in error and dev_consume_skb_irq() means the SKB
is consumed in normal.
In this case, dev_kfree_skb() is called to free and drop the SKB when
it's reset, so replace it with dev_kfree_skb_irq(). Compile tested
only.
Fixes: 43f66a6ce8da ("Add ipw2200 wireless driver.")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221208143826.2385218-1-yangyingliang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 25a4481b4136af7794e1df2d6c90ed2f354d60ce ]
btf__align_of() is supposed to be return alignment requirement of
a requested BTF type. For STRUCT/UNION it doesn't always return correct
value, because it calculates alignment only based on field types. But
for packed structs this is not enough, we need to also check field
offsets and struct size. If field offset isn't aligned according to
field type's natural alignment, then struct must be packed. Similarly,
if struct size is not a multiple of struct's natural alignment, then
struct must be packed as well.
This patch fixes this issue precisely by additionally checking these
conditions.
Fixes: 3d208f4ca111 ("libbpf: Expose btf__align_of() API")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20221212211505.558851-5-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 117dbeda22ec5ea0918254d03b540ef8b8a64d53 ]
There is a global-out-of-bounds reported by KASAN:
BUG: KASAN: global-out-of-bounds in
_rtl8812ae_eq_n_byte.part.0+0x3d/0x84 [rtl8821ae]
Read of size 1 at addr ffffffffa0773c43 by task NetworkManager/411
CPU: 6 PID: 411 Comm: NetworkManager Tainted: G D
6.1.0-rc8+ #144 e15588508517267d37
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009),
Call Trace:
<TASK>
...
kasan_report+0xbb/0x1c0
_rtl8812ae_eq_n_byte.part.0+0x3d/0x84 [rtl8821ae]
rtl8821ae_phy_bb_config.cold+0x346/0x641 [rtl8821ae]
rtl8821ae_hw_init+0x1f5e/0x79b0 [rtl8821ae]
...
</TASK>
The root cause of the problem is that the comparison order of
"prate_section" in _rtl8812ae_phy_set_txpower_limit() is wrong. The
_rtl8812ae_eq_n_byte() is used to compare the first n bytes of the two
strings from tail to head, which causes the problem. In the
_rtl8812ae_phy_set_txpower_limit(), it was originally intended to meet
this requirement by carefully designing the comparison order.
For example, "pregulation" and "pbandwidth" are compared in order of
length from small to large, first is 3 and last is 4. However, the
comparison order of "prate_section" dose not obey such order requirement,
therefore when "prate_section" is "HT", when comparing from tail to head,
it will lead to access out of bounds in _rtl8812ae_eq_n_byte(). As
mentioned above, the _rtl8812ae_eq_n_byte() has the same function as
strcmp(), so just strcmp() is enough.
Fix it by removing _rtl8812ae_eq_n_byte() and use strcmp() barely.
Although it can be fixed by adjusting the comparison order of
"prate_section", this may cause the value of "rate_section" to not be
from 0 to 5. In addition, commit "21e4b0726dc6" not only moved driver
from staging to regular tree, but also added setting txpower limit
function during the driver config phase, so the problem was introduced
by this commit.
Fixes: 21e4b0726dc6 ("rtlwifi: rtl8821ae: Move driver from staging to regular tree")
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221212025812.1541311-1-lizetao1@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4c2005ac87685907b3719b4f40215b578efd27c4 ]
It is not allowed to call kfree_skb() or consume_skb() from hardware
interrupt context or with hardware interrupts being disabled.
It should use dev_kfree_skb_irq() or dev_consume_skb_irq() instead.
The difference between them is free reason, dev_kfree_skb_irq() means
the SKB is dropped in error and dev_consume_skb_irq() means the SKB
is consumed in normal.
In this case, dev_kfree_skb() is called to free and drop the SKB when
it's shutdown, so replace it with dev_kfree_skb_irq(). Compile tested
only.
Fixes: 26f1fad29ad9 ("New driver: rtl8xxxu (mac80211)")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221208143517.2383424-1-yangyingliang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0c1528675d7a9787cb516b64d8f6c0f6f8efcb48 ]
It is not allowed to call consume_skb() from hardware interrupt context
or with interrupts being disabled. So replace dev_kfree_skb() with
dev_consume_skb_irq() under spin_lock_irqsave(). Compile tested only.
Fixes: 4bc85c1324aa ("Revert "iwlwifi: split the drivers for agn and legacy devices 3945/4965"")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221207144013.70210-1-yangyingliang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 313950c2114e7051c4e3020fd82495fa1fb526a8 ]
It is not allowed to call kfree_skb() from hardware interrupt
context or with interrupts being disabled. All the SKBs have
been dequeued from the old queue, so it's safe to enqueue these
SKBs to a free queue, then free them after spin_unlock_irqrestore()
at once. Compile tested only.
Fixes: 5c99f04fec93 ("rtlwifi: rtl8723be: Update driver to match Realtek release of 06/28/14")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221207141411.46098-4-yangyingliang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2611687fa7ffc84190f92292de0b80468de17220 ]
It is not allowed to call kfree_skb() from hardware interrupt
context or with interrupts being disabled. All the SKBs have
been dequeued from the old queue, so it's safe to enqueue these
SKBs to a free queue, then free them after spin_unlock_irqrestore()
at once. Compile tested only.
Fixes: 7fe3b3abb5da ("rtlwifi: rtl8188ee: rtl8821ae: Fix a queue locking problem")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221207141411.46098-3-yangyingliang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 106031c1f4a850915190d7ec1026696282f9359b ]
It is not allowed to call kfree_skb() from hardware interrupt
context or with interrupts being disabled. All the SKBs have
been dequeued from the old queue, so it's safe to enqueue these
SKBs to a free queue, then free them after spin_unlock_irqrestore()
at once. Compile tested only.
Fixes: 5c99f04fec93 ("rtlwifi: rtl8723be: Update driver to match Realtek release of 06/28/14")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221207141411.46098-2-yangyingliang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 956fb851a6e19da5ab491e19c1bc323bb2c2cf6f ]
The coex_cb needs to be freed when rsi_create_kthread() failed in
rsi_coex_attach().
Fixes: 2108df3c4b18 ("rsi: add coex support")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221205061441.114632-1-yuancan@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b6a4bdcda430e3ca43bbb9cb1d4d4d34ebe15c40 ]
Make sure to copy the flags when a bio_integrity_payload is cloned.
Otherwise per-I/O properties such as IP checksum flag will not be
passed down to the HBA driver. Since the integrity buffer is owned by
the original bio, the BIP_BLOCK_INTEGRITY flag needs to be masked off
to avoid a double free in the completion path.
Fixes: aae7df50190a ("block: Integrity checksum flag")
Fixes: b1f01388574c ("block: Relocate bio integrity flags")
Reported-by: Saurav Kashyap <skashyap@marvell.com>
Tested-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20230215171801.21062-1-martin.petersen@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c0ee8e0ba5cc17623e63349a168b41e407b1eef0 ]
A special compatible was introduced for PMK8350 both in the driver and
the bindings to facilitate for 2 base registers (PBS & HLOS). Use it.
Fixes: b2de43136058 ("arm64: dts: qcom: pmk8350: Add peripherals for pmk8350")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230213212930.2115182-1-konrad.dybcio@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f46ef374e0dcb8fd2f272a376cf0dcdab7e52fc2 ]
PMK8350 is the first PMIC to require both HLOS and PBS registers for
PON to function properly (at least in theory, sm8350 sees no change).
The support for it on the driver side has been added long ago,
but it has never been wired up. Do so.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221115132626.7465-1-konrad.dybcio@linaro.org
Stable-dep-of: c0ee8e0ba5cc ("arm64: dts: qcom: pmk8350: Use the correct PON compatible")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 10de7b54293995368c52d9aa153f3e7a359f04a1 ]
When support for ECDSA keys was added, constraints for data & signature
sizes were never updated. This makes it impossible to use such keys via
keyctl API from userspace.
Update constraint on max_data_size to 64 bytes in order to support
SHA512-based signatures. Also update the signature length constraints
per ECDSA signature encoding described in RFC 5480.
Fixes: 299f561a6693 ("x509: Add support for parsing x509 certs with ECDSA keys")
Signed-off-by: Denis Kenzior <denkenz@gmail.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fd636b6a9bc6034f2e5bb869658898a2b472c037 ]
Some of Nano series processors will lead GP when accessing
PMC fixed counter. Meanwhile, their hardware support for PMC
has not announced externally. So exclude Nano CPUs from ZXC
by checking stepping information. This is an unambiguous way
to differentiate between ZXC and Nano CPUs.
Following are Nano and ZXC FMS information:
Nano FMS: Family=6, Model=F, Stepping=[0-A][C-D]
ZXC FMS: Family=6, Model=F, Stepping=E-F OR
Family=6, Model=0x19, Stepping=0-3
Fixes: 3a4ac121c2ca ("x86/perf: Add hardware performance events support for Zhaoxin CPU.")
Reported-by: Arjan <8vvbbqzo567a@nospam.xutrox.com>
Reported-by: Kevin Brace <kevinbrace@gmx.com>
Signed-off-by: silviazhao <silviazhao-oc@zhaoxin.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=212389
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7c4a5b89a0b5a57a64b601775b296abf77a9fe97 ]
Commit 326587b84078 ("sched: fix goto retry in pick_next_task_rt()")
removed any path which could make pick_next_rt_entity() return NULL.
However, BUG_ON(!rt_se) in _pick_next_task_rt() (the only caller of
pick_next_rt_entity()) still checks the error condition, which can
never happen, since list_entry() never returns NULL.
Remove the BUG_ON check, and instead emit a warning in the only
possible error condition here: the queue being empty which should
never happen.
Fixes: 326587b84078 ("sched: fix goto retry in pick_next_task_rt()")
Signed-off-by: Pietro Borrello <borrello@diag.uniroma1.it>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Phil Auld <pauld@redhat.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20230128-list-entry-null-check-sched-v3-1-b1a71bd1ac6b@diag.uniroma1.it
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 460e9bed82e49db1b823dcb4e421783854d86c40 ]
`dasd_reserve_req` is allocated before `dasd_vol_info_req`, and it
also needs to be freed before the error returns, just like the other
cases in this function.
Fixes: 9e12e54c7a8f ("s390/dasd: Handle out-of-space constraint")
Signed-off-by: Qiheng Lin <linqiheng@huawei.com>
Link: https://lore.kernel.org/r/20221208133809.16796-1-linqiheng@huawei.com
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20230210000253.1644903-3-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d44106883d74992343710f18c4aaae937c7cefab ]
The memory region reserved by a previous commit (see fixes tag below)
overlaps with the SMEM and MPSS memory regions, causing error messages in
dmesg:
OF: reserved mem: OVERLAP DETECTED!
reserved@5000000 (0x0000000005000000--0x0000000007200000)
overlaps with smem_region@6a00000
(0x0000000006a00000--0x0000000006c00000)
OF: reserved mem: OVERLAP DETECTED!
reserved@6c00000 (0x0000000006c00000--0x0000000007200000)
overlaps with memory@7000000
(0x0000000007000000--0x000000000ca00000)
This patch resolves both of these by splitting the previously reserved
memory region into two sections either side of the SMEM region and by
cutting off the second memory region to 0x7000000.
Fixes: 22c7e1a0fa45 ("arm64: dts: msm8992-bullhead: add memory hole region")
Signed-off-by: Jamie Douglass <jamiemdouglass@gmail.com>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Tested-by: Petr Vorel <pvorel@suse.cz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230202054819.16079-1-jamiemdouglass@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 01542f651a9f58a9b176c3d3dc3eefbacee53b78 ]
Commit 88022d7201e96 ("blk-mq: don't handle failure in .get_budget")
remove BLK_STS_RESOURCE return value and we only check if we can get
the budget from .get_budget() now.
Correct stale comment that ".get_budget() returns BLK_STS_NO_RESOURCE"
to ".get_budget() fails to get the budget".
Fixes: 88022d7201e9 ("blk-mq: don't handle failure in .get_budget")
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c31e76bcc379182fe67a82c618493b7b8868c672 ]
Commit 97889f9ac24f8 ("blk-mq: remove synchronize_rcu() from
blk_mq_del_queue_tag_set()") remove handle of TAG_SHARED in restart,
then shared_hctx_restart counted for how many hardware queues are marked
for restart is removed too.
Remove the stale comment that we still count hardware queues need restart.
Fixes: 97889f9ac24f ("blk-mq: remove synchronize_rcu() from blk_mq_del_queue_tag_set()")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6ee858a3d3270a68902d66bb47c151a83622535c ]
Commit 1f5bd336b9150 ("blk-mq: add blk_mq_alloc_request_hctx") add
blk_mq_alloc_request_hctx to send commands to a specific queue. If
BLK_MQ_REQ_NOWAIT is not set in tag allocation, we may change to different
hctx after sleep and get tag from unexpected hctx. So BLK_MQ_REQ_NOWAIT
must be set in flags for blk_mq_alloc_request_hctx.
After commit 600c3b0cea784 ("blk-mq: open code __blk_mq_alloc_request in
blk_mq_alloc_request_hctx"), blk_mq_alloc_request_hctx return -EINVAL
if both BLK_MQ_REQ_NOWAIT and BLK_MQ_REQ_RESERVED are not set instead of
if BLK_MQ_REQ_NOWAIT is not set. So if BLK_MQ_REQ_NOWAIT is not set and
BLK_MQ_REQ_RESERVED is set, blk_mq_alloc_request_hctx could alloc tag
from unexpected hctx. I guess what we need here is that return -EINVAL
if either BLK_MQ_REQ_NOWAIT or BLK_MQ_REQ_RESERVED is not set.
Currently both BLK_MQ_REQ_NOWAIT and BLK_MQ_REQ_RESERVED will be set if
specific hctx is needed in nvme_auth_submit, nvmf_connect_io_queue
and nvmf_connect_admin_queue. Fix the potential BLK_MQ_REQ_NOWAIT missed
case in future.
Fixes: 600c3b0cea78 ("blk-mq: open code __blk_mq_alloc_request in blk_mq_alloc_request_hctx")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 160ce54d635455ffb5e9b42c5ba9cb9aaa98cdb2 ]
MT8192 features the ARM DynamIQ technology and combines both four
Cortex-A76 (big) and four Cortex-A55 (LITTLE) CPUs in one cluster:
fix the CPU map to reflect that.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Fixes: 48489980e27e ("arm64: dts: Add Mediatek SoC MT8192 and evaluation board dts and Makefile")
Link: https://lore.kernel.org/r/20230126103526.417039-3-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2177d4ae971f79b4a9a3c411f2fb8ae6113d1430 ]
The property named in the schema is 'enable-gpios', not 'enable-gpio'.
This makes no difference at runtime, because the regulator is marked as
always-on, but it breaks validation.
Fixes: 4701fc6e5dd9 ("ARM: dts: sun8i: add FriendlyARM NanoPi Duo2")
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20221231225854.16320-2-samuel@sholland.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 856968e066bd77b113965f1a355ec7401edff65f ]
For proper warm (re)boot from SD card the BPI-M5 board requires TFLASH_VDD_EN
and VDDIO_C pins to be switched to high impedance mode. This can be achieved
using OPEN_DRAIN instead of ACTIVE_HIGH to leave the GPIO pins in input mode
and retain high state (pin has the pull-up).
This change is inspired by meson-sm1-odroid.dtsi where OPEN_DRAIN has been
used to resolve similar problems with the Odroid C4 board (TF_IO in the C4
dts is the equivalent regulator).
Fixes: 976e920183e4 ("arm64: dts: meson-sm1: add Banana PI BPI-M5 board dts")
Suggested-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230127142221.3718184-2-christianshewitt@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d7f9492dfc03153ac56ab59066a196558748f575 ]
The board used to originally introduce the Beacon Embedded RZ/G2[M/N/H]
boards had a GPIO expander with address 20, but this was changed when
the final board went to production.
The production boards changed both the part itself and the address.
With the incorrect address, the LCD cannot come up. If the LCD fails,
the rcar-du driver fails to come up, and that also breaks HDMI.
Pre-release board were not shipped to the general public, so it should
be safe to push this as a fix. Anyone with a production board would
have video fail due to this GPIO expander change.
Fixes: a1d8a344f1ca ("arm64: dts: renesas: Introduce r8a774a1-beacon-rzg2m-kit")
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230114225647.227972-1-aford173@gmail.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3f5245538a1964ae186ab7e1636020a41aa63143 ]
Commit:
91d2a812dfb9 ("locking/rwsem: Make handoff writer optimistically spin on owner")
... assumes that when the owner field is changed to NULL, the lock will
become free soon. But commit:
48dfb5d2560d ("locking/rwsem: Disable preemption while trying for rwsem lock")
... disabled preemption when acquiring rwsem for write.
However, preemption has not yet been disabled when acquiring a read lock
on a rwsem. So a reader can add a RWSEM_READER_BIAS to count without
setting owner to signal a reader, got preempted out by a RT task which
then spins in the writer slowpath as owner remains NULL leading to live lock.
One easy way to fix this problem is to disable preemption at all the
down_read*() and up_read() code paths as implemented in this patch.
Fixes: 91d2a812dfb9 ("locking/rwsem: Make handoff writer optimistically spin on owner")
Reported-by: Mukesh Ojha <quic_mojha@quicinc.com>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230126003628.365092-3-longman@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 14c24048841151548a3f4d9e218510c844c1b737 ]
We found that a process with 10 thousnads threads has been encountered
a regression problem from Linux-v4.14 to Linux-v5.4. It is a kind of
workload which will concurrently allocate lots of memory in different
threads sometimes. In this case, we will see the down_read_trylock()
with a high hotspot. Therefore, we suppose that rwsem has a regression
at least since Linux-v5.4. In order to easily debug this problem, we
write a simply benchmark to create the similar situation lile the
following.
```c++
#include <sys/mman.h>
#include <sys/time.h>
#include <sys/resource.h>
#include <sched.h>
#include <cstdio>
#include <cassert>
#include <thread>
#include <vector>
#include <chrono>
volatile int mutex;
void trigger(int cpu, char* ptr, std::size_t sz)
{
cpu_set_t set;
CPU_ZERO(&set);
CPU_SET(cpu, &set);
assert(pthread_setaffinity_np(pthread_self(), sizeof(set), &set) == 0);
while (mutex);
for (std::size_t i = 0; i < sz; i += 4096) {
*ptr = '\0';
ptr += 4096;
}
}
int main(int argc, char* argv[])
{
std::size_t sz = 100;
if (argc > 1)
sz = atoi(argv[1]);
auto nproc = std:🧵:hardware_concurrency();
std::vector<std::thread> thr;
sz <<= 30;
auto* ptr = mmap(nullptr, sz, PROT_READ | PROT_WRITE, MAP_ANON |
MAP_PRIVATE, -1, 0);
assert(ptr != MAP_FAILED);
char* cptr = static_cast<char*>(ptr);
auto run = sz / nproc;
run = (run >> 12) << 12;
mutex = 1;
for (auto i = 0U; i < nproc; ++i) {
thr.emplace_back(std::thread([i, cptr, run]() { trigger(i, cptr, run); }));
cptr += run;
}
rusage usage_start;
getrusage(RUSAGE_SELF, &usage_start);
auto start = std::chrono::system_clock::now();
mutex = 0;
for (auto& t : thr)
t.join();
rusage usage_end;
getrusage(RUSAGE_SELF, &usage_end);
auto end = std::chrono::system_clock::now();
timeval utime;
timeval stime;
timersub(&usage_end.ru_utime, &usage_start.ru_utime, &utime);
timersub(&usage_end.ru_stime, &usage_start.ru_stime, &stime);
printf("usr: %ld.%06ld\n", utime.tv_sec, utime.tv_usec);
printf("sys: %ld.%06ld\n", stime.tv_sec, stime.tv_usec);
printf("real: %lu\n",
std::chrono::duration_cast<std::chrono::milliseconds>(end -
start).count());
return 0;
}
```
The functionality of above program is simply which creates `nproc`
threads and each of them are trying to touch memory (trigger page
fault) on different CPU. Then we will see the similar profile by
`perf top`.
25.55% [kernel] [k] down_read_trylock
14.78% [kernel] [k] handle_mm_fault
13.45% [kernel] [k] up_read
8.61% [kernel] [k] clear_page_erms
3.89% [kernel] [k] __do_page_fault
The highest hot instruction, which accounts for about 92%, in
down_read_trylock() is cmpxchg like the following.
91.89 │ lock cmpxchg %rdx,(%rdi)
Sice the problem is found by migrating from Linux-v4.14 to Linux-v5.4,
so we easily found that the commit ddb20d1d3aed ("locking/rwsem: Optimize
down_read_trylock()") caused the regression. The reason is that the
commit assumes the rwsem is not contended at all. But it is not always
true for mmap lock which could be contended with thousands threads.
So most threads almost need to run at least 2 times of "cmpxchg" to
acquire the lock. The overhead of atomic operation is higher than
non-atomic instructions, which caused the regression.
By using the above benchmark, the real executing time on a x86-64 system
before and after the patch were:
Before Patch After Patch
# of Threads real real reduced by
------------ ------ ------ ----------
1 65,373 65,206 ~0.0%
4 15,467 15,378 ~0.5%
40 6,214 5,528 ~11.0%
For the uncontended case, the new down_read_trylock() is the same as
before. For the contended cases, the new down_read_trylock() is faster
than before. The more contended, the more fast.
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Waiman Long <longman@redhat.com>
Link: https://lore.kernel.org/r/20211118094455.9068-1-songmuchun@bytedance.com
Stable-dep-of: 3f5245538a19 ("locking/rwsem: Disable preemption in all down_read*() and up_read() code paths")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1d2f14117aa7773efff50f832b85fc7779e586e0 ]
Add an active trip tied to the on-board fan cooling device, which is better
than describing it along the passive cooling maps.
Fixes: 33b14f663df8 ("arm64: dts: meson: add initial device-tree for ODROID-HC4")
Reported-by: Ricardo Pardini <ricardo@pardini.net>
Link: https://lore.kernel.org/r/20230124-topic-odroid-hc4-upstream-fix-fan-trip-v1-1-b0c6aa355d93@linaro.org
Tested-by: Ricardo Pardini <ricardo@pardini.net>
[narmstrong: added Ricardo's tested-by from off-list chat]
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d519a73332b6c3d14e15f8fd20d7c6f29ed13d41 ]
Fixes:
adc_keys: 'key' does not match any of the regexes: '^button-', 'pinctrl-[0-9]+'
Also fix the invalid "adc_keys" node name.
Link: https://lore.kernel.org/r/20230124-b4-amlogic-bindings-fixups-v1-11-44351528957e@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
