IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
When CONFIG_PM is not set, there is an unused function warning:
sound/pci/hda/patch_analog.c:115:13: warning: unused function
'ad198x_shutup' [-Wunused-function]
static void ad198x_shutup(struct hda_codec *codec)
^
1 warning generated.
Sink ad198x_shutup() into ad198x_suspend(), as it is only called in that
one space. Move the CONFIG_PM guards above ad198x_power_eapd_write() as
it is only called in ad198x_power_eapd(), which is in turn only called
in ad198x_power_eapd(). Those two functions are large enough that they
are left alone.
Fixes: 327b34f2a97d ("ALSA: hda: Nuke unused reboot_notify callback")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20210818012705.311963-2-nathan@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When CONFIG_PM is not set, there is an unused function warning:
sound/pci/hda/patch_sigmatel.c:4383:13: warning: unused function
'stac_shutup' [-Wunused-function]
static void stac_shutup(struct hda_codec *codec)
^
1 warning generated.
Sink the contents of stac_shutup() into stac_suspend() since
stac_shutup() is only called in that one location now.
Fixes: 327b34f2a97d ("ALSA: hda: Nuke unused reboot_notify callback")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20210818012705.311963-1-nathan@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The commit 0165c4e19f6e ("ALSA: hda: Fix hang during shutdown due to
link reset") modified the shutdown callback of the HD-audio controller
for working around a hang. Meanwhile, the actual culprit of the hang
was identified to be the leftover active codecs that may interfere
with the powered down controller somehow, but we took a minimal fix
approach for 5.14, and that was the commit above.
Now, since the codec drivers go runtime-suspend at shutdown for 5.15,
we can revert the change and make sure that the full runtime-suspend
is performed at shutdown of HD-audio controller again. This patch
essentially reverts the commit above to restore the behavior.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214045
Link: https://lore.kernel.org/r/20210817075630.7115-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The 2021-model XPS 15 appears to use the same 4-speakers-on-ALC289 audio
setup as the Precision models, so requires the same quirk to enable woofer
output. Tested on my own 9510.
Signed-off-by: Kristin Paget <kristin@tombom.co.uk>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/e1fc95c5-c10a-1f98-a5c2-dd6e336157e1@tombom.co.uk
Signed-off-by: Takashi Iwai <tiwai@suse.de>
So far we have a few workarounds at shutdown for each codec,
e.g. turning off the display power and setting the codec to D3.
But all those are basically a part of the suspend procedure.
Moreover, the streams are still active after that call, hence it might
hit the update on the codec that has been already put to D3.
In this patch, instead of calling each reboot_notify callback, simply
put the codec into the runtime-suspended state after the manual
suspend of all PCM streams. It makes the code and the behavior more
consistent.
The reboot_notify callback is no longer used after this patch, and
will be cleaned up later.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214045
Link: https://lore.kernel.org/r/20210813081230.4268-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ALSA PCM core has an optimized way to communicate with user-space for
its control and status data via mmap on the supported architectures
like x86. Depending on the situation, however, we'd rather want to
enforce user-space notifying the applptr or hwptr change explicitly
via ioctl. For example, the upcoming non-contig and non-coherent
buffer handling would need an explicit sync, and this needs to catch
the applptr and hwptr changes. Also, ASoC SOF driver will have the
SPIB support that has the similar requirement for the explicit control
of the applptr and hwptr.
This patch adds the new PCM hardware info flag,
SNDRV_PCM_INFO_EXPLICIT_SYNC. When this flag is set, PCM core
disables both the control and the status mmap, which enforces
user-space to update via SYNC_PTR ioctl. In that way, drivers can
catch the applptr and hwptr update and apply the sync operation if
needed.
Link: https://lore.kernel.org/r/20210812113818.6479-1-tiwai@suse.de
Link: https://lore.kernel.org/r/20210610205326.1176400-1-pierre-louis.bossart@linux.intel.com
Link: https://lore.kernel.org/r/20210813082142.5375-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This adds a second mixer control to Digidesign Mbox
to select between Analog/SPDIF capture.
Users will note that selecting the SPDIF input source
automatically switches the clock mode to sync to SPDIF,
which is a feature of the hardware.
(You can change the clock source back to internal if you want
to capture from spdif but not sync to its clock although this mode
is probably not recommended).
Unfortunately, starting the stream resets both modes
to Internally clocked and Analog input mode.
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Tested-by: Damien Zammit <damien@zamaudio.com>
Link: https://lore.kernel.org/r/20210813113402.11849-1-damien@zamaudio.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is an enhancement for the SG-style page handling in vmalloc
buffer handler to calculate the continuous pages.
When snd_sgbuf_get_chunk_size() is called for a vmalloc buffer,
currently we return only the size that fits into a single page.
However, this API call is rather supposed for obtaining the continuous
pages and most of vmalloc or noncontig buffers do have lots of
continuous pages indeed. So, in this patch, the callback now
calculates the possibly continuous pages up to the given size limit.
Note that the end address in the function is calculated from the last
byte, hence it's one byte shorter. This is because ofs + size can be
above the actual buffer size boundary.
Until now, this feature isn't really used, but it'll become useful in
a later patch that adds the non-contiguous buffer type that shares the
same callback function as vmalloc.
Link: https://lore.kernel.org/r/20210812113818.6479-1-tiwai@suse.de
Link: https://lore.kernel.org/r/20210813081645.4680-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some of the register values set for type detection cause pops during suspend,
ensure these are cleaned up after type detection completes, as well
ensuring that these are cleared when we suspend.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210812183433.6330-1-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Codec is muted on init, and then unmuted when the stream starts.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210811185654.6837-28-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Since delays when starting jack detection after initialization
have been reduced/removed, it is necessary to add back in an extra
20ms delay after the init sequence to allow the CS42L42 to power up
correctly.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210811185654.6837-26-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
CS42L42 is configured to use a fixed sample rate of 48kHz.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210811185654.6837-24-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Headphones codec will keep reduced maximum volume.
Line Out codec will have increased maximum volume.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210811185654.6837-23-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Dolphin devices have CS8409 HDA Bridge connected to two CS42L42 codecs.
Codec 1 supports Headphone and Headset Mic.
Codec 2 supports Line Out.
Features:
- Front and Read Jacks appear as separate jacks; Removal or connection
of on jack should not affect the connection of the other.
- Front Jack only shows up on jack detection.
- Rear Jack is Phantom Jack.
- Separate Volume Controls for each Jack
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210811185654.6837-22-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some hardware configurations do not support jack type detection.
Instead, for those configurations, only tip detection is supported.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210811185654.6837-21-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
To accommodate move, cs42l42_resume has been added to mirror
the existing function cs42l42_suspend.
Function cs42l42_reset is no longer required, since cs42l42_resume
and cs42l42_suspend perform the same operations.
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210811185654.6837-19-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This allows mutex locks to be moved into i2c functions, as
the bulk read/write functions can lock/unlock themselves to
prevent interruption of sequence reads/writes.
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210811185654.6837-17-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Only disable I2C clock 25 ms after not being used.
The current implementation enables and disables the I2C clock for each
I2C transaction. Each enable/disable call requires two verb transactions.
This means each I2C transaction requires a total of four verb transactions
to enable and disable the clock.
However, if there are multiple consecutive I2C transactions, it is not
necessary to enable and disable the clock each time, instead it is more
efficient to enable the clock for the first transaction, and disable it
after the final transaction, which would improve performance.
This is achieved by using a timeout which disables the clock if no request
to enable the clock has occurred for 25 ms.
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210811185654.6837-14-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use amp offsets as indexes for saved volumes.
Remove dependencies on NID inside volume control functions.
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210811185654.6837-13-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The subsequence suspend and remuse have their enable/disable
unsolicited responses at the correct place already
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210811185654.6837-9-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Enable HSBIAS_SENSE_EN for Cyborg during jack detect to reduce
pops and clicks.
Do not enable this for Warlock/Bullseye, as it causes ESD issues.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210811185654.6837-6-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
OXFW 971 has no function to use the value in syt field of received
isochronous packet for playback timing generation. In kernel prepatch for
v5.14, ALSA OXFW driver got change to send NO_INFO value in the field
instead of actual timing value. The change brings Apogee Duet FireWire to
generate no playback sound, while output meter moves.
As long as I investigate, _any_ value in the syt field takes the device to
generate sound. It's reasonable to think that the device just ignores data
blocks in packet with NO_INFO value in its syt field for audio data
processing.
This commit adds a new flag for the quirk to fix regression.
Fixes: 029ffc429440 ("ALSA: oxfw: perform sequence replay for media clock recovery")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210812022839.42043-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The original code in the cap_put_caller() function does not
handle correctly the positive values returned from the passed
function for multiple iterations. It means that the change
notifications may be lost.
Fixes: 352f7f914ebb ("ALSA: hda - Merge Realtek parser code to generic parser")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=213851
Cc: <stable@kernel.org>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20210811161441.1325250-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The HP ProBook 650 G8 Notebook PC is using ALC236 codec which is
using 0x02 to control mute LED and 0x01 to control micmute LED.
Therefore, add a quirk to make it works.
Signed-off-by: Jeremy Szu <jeremy.szu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210810100846.65844-1-jeremy.szu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The old ISA MSND driver basically maps the iomem as the DMA buffer.
For this type of buffer, we have already the standard mmap helper,
snd_pcm_lib_mmap_iomem(). Correct the PCM info, set the DMA address
and use the standard helper for handling the mmap on all architectures
properly.
Link: https://lore.kernel.org/r/20210809140532.11006-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
CS46xx driver switches the buffer depending on the number of periods,
and in some cases it switches to the own buffer without updating the
buffer type properly. This may cause a problem with the mmap on
exotic architectures that require the own mmap call for the coherent
DMA buffer.
This patch addresses the potential breakage by replacing the buffer
setup with the proper macro. It also simplifies the source code,
too.
Link: https://lore.kernel.org/r/20210809071829.22238-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Although the regression of the mmap was fixed in the recent commit
dc0dc8a73e8e ("ALSA: pcm: Fix mmap breakage without explicit buffer
setup"), RME9652 and HDSP drivers have still potential issues with
their mmap handling. Namely, they use the default mmap handler
without the standard buffer preallocation, and PCM core wouldn't use
the coherent DMA mapping. It's practically OK on x86, but on some
exotic architectures, it wouldn't work.
This patch addresses the potential breakage by replacing the buffer
setup with the proper macro. It also simplifies the source code,
too.
Link: https://lore.kernel.org/r/20210809071829.22238-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently we check only the substream->dma_buffer as the preset of the
buffer configuration for verifying the availability of mmap. But a
few drivers rather set up the buffer in the own way without the
standard buffer preallocation using substream->dma_buffer, and they
miss the proper checks. (Now it's working more or less fine as most
of them are running only on x86).
Actually, they may set up the runtime dma_buffer (referred via
snd_pcm_get_dma_buf()) at the open callback, though. That is, this
could have been used as the primary source.
This patch changes the hw_support_mmap() function to check the runtime
dma buffer at first. It's usually NULL with the standard buffer
preallocation, and in that case, we continue checking
substream->dma_buffer as fallback.
Link: https://lore.kernel.org/r/20210809071829.22238-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
