IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
SEGV_BNDERR was introduced initially for supporting the Intel MPX, but
fell into disuse after the MPX support was removed. The LoongArch
bounds-checking instructions behave very differently than MPX, but
overall the interface is still kind of suitable for conveying the
information to userland when bounds-checking assertions trigger, so we
wouldn't have to invent more UAPI. Specifically, when the BCE triggers,
a SEGV_BNDERR is sent to userland, with si_addr set to the out-of-bounds
address or value (in asrt{gt,le}'s case), and one of si_lower or
si_upper set to the configured bound depending on the faulting
instruction. The other bound is set to either 0 or ULONG_MAX to resemble
a range with both lower and upper bounds.
Note that it is possible to have si_addr == si_lower in case of a
failing asrtgt or {ld,st}gt, because those instructions test for strict
greater-than relationship. This should not pose a problem for userland,
though, because the faulting PC is available for the application to
associate back to the exact instruction for figuring out the
expectation.
Example exception context generated by a faulting `asrtgt.d t0, t1`
(assert t0 > t1 or BCE) with t0=100 and t1=200:
> pc 00005555558206a4 ra 00007ffff2d854fc tp 00007ffff2f2f180 sp 00007ffffbf9fb80
> a0 0000000000000002 a1 00007ffffbf9fce8 a2 00007ffffbf9fd00 a3 00007ffff2ed4558
> a4 0000000000000000 a5 00007ffff2f044c8 a6 00007ffffbf9fce0 a7 fffffffffffff000
> t0 0000000000000064 t1 00000000000000c8 t2 00007ffffbfa2d5e t3 00007ffff2f12aa0
> t4 00007ffff2ed6158 t5 00007ffff2ed6158 t6 000000000000002e t7 0000000003d8f538
> t8 0000000000000005 u0 0000000000000000 s9 0000000000000000 s0 00007ffffbf9fce8
> s1 0000000000000002 s2 0000000000000000 s3 00007ffff2f2c038 s4 0000555555820610
> s5 00007ffff2ed5000 s6 0000555555827e38 s7 00007ffffbf9fd00 s8 0000555555827e38
> ra: 00007ffff2d854fc
> ERA: 00005555558206a4
> CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE)
> PRMD: 00000007 (PPLV3 +PIE -PWE)
> EUEN: 00000000 (-FPE -SXE -ASXE -BTE)
> ECFG: 0007181c (LIE=2-4,11-12 VS=7)
> ESTAT: 000a0000 [BCE] (IS= ECode=10 EsubCode=0)
> PRID: 0014c010 (Loongson-64bit, Loongson-3A5000)
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Use ISA manual names for BADV and CPUCFG.PRID lines in show_regs(), for
stylistic consistency with the other lines already touched.
While at it, also include current CPU's full name in show_regs() output.
It may be more helpful for developers looking at the resulting dumps,
because multiple distinct CPU models may share the same PRID. Not having
this info available may hide problems only found on some but not all of
the models sharing one specific PRID.
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Example output looks like:
[ xx.xxxxxx] CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE)
Some initial machinery for this pretty-printing format has been included
in this patch as well.
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Use uppercase CSR names throughout for consistency with the manual
wording, and right-align the keys. The "CSR" part is inferrable from
context, hence dropped for more horizontal space.
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Otherwise the addresses wouldn't make sense at all.
While at it, align the "map keys" to maintain right-alignment with the
"estat:" line too; also swap the ERA and ra lines so all CSRs are shown
together.
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Show PC (CSR.ERA) in place of $zero, and also show the syscall restart
flag (conveniently stuffed in regs[0]) if non-zero.
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Define them according to the ISA manual, in order to enable matching the
sub-exceptions for humanization purposes later.
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
While interrupts are assigned ECodes `64 + interrupt number`, all
existing use sites of interrupt numbers want the 64 subtracted.
Re-arrange the definitions so that the actual interrupt number is used
everywhere, and make EXCCODE_INT_END inclusive as it is more intuitive
that way.
While at it, according to the asm/loongarch.h definitions, the total
number of architectural interrupts should be 14, but various other
places indicate otherwise (13 or 15). Those places have been adjusted
to 14 as well for consistency.
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
smatch reports
drivers/i3c/master/ast2600-i3c-master.c:121:34: warning: symbol
'ast2600_i3c_ops' was not declared. Should it be static?
This variable is only used in its defining file, so it should be static.
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au>
Link: https://lore.kernel.org/r/20230429134601.2688558-1-trix@redhat.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Including:
- Convert to platform remove callback returning void
- Extend changing default domain to normal group
- Intel VT-d updates:
- Remove VT-d virtual command interface and IOASID
- Allow the VT-d driver to support non-PRI IOPF
- Remove PASID supervisor request support
- Various small and misc cleanups
- ARM SMMU updates:
- Device-tree binding updates:
* Allow Qualcomm GPU SMMUs to accept relevant clock properties
* Document Qualcomm 8550 SoC as implementing an MMU-500
* Favour new "qcom,smmu-500" binding for Adreno SMMUs
- Fix S2CR quirk detection on non-architectural Qualcomm SMMU
implementations
- Acknowledge SMMUv3 PRI queue overflow when consuming events
- Document (in a comment) why ATS is disabled for bypass streams
- AMD IOMMU updates:
- 5-level page-table support
- NUMA awareness for memory allocations
- Unisoc driver: Support for reattaching an existing domain
- Rockchip driver: Add missing set_platform_dma_ops callback
- Mediatek driver: Adjust the dma-ranges
- Various other small fixes and cleanups
-----BEGIN PGP SIGNATURE-----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=OvTo
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- Convert to platform remove callback returning void
- Extend changing default domain to normal group
- Intel VT-d updates:
- Remove VT-d virtual command interface and IOASID
- Allow the VT-d driver to support non-PRI IOPF
- Remove PASID supervisor request support
- Various small and misc cleanups
- ARM SMMU updates:
- Device-tree binding updates:
* Allow Qualcomm GPU SMMUs to accept relevant clock properties
* Document Qualcomm 8550 SoC as implementing an MMU-500
* Favour new "qcom,smmu-500" binding for Adreno SMMUs
- Fix S2CR quirk detection on non-architectural Qualcomm SMMU
implementations
- Acknowledge SMMUv3 PRI queue overflow when consuming events
- Document (in a comment) why ATS is disabled for bypass streams
- AMD IOMMU updates:
- 5-level page-table support
- NUMA awareness for memory allocations
- Unisoc driver: Support for reattaching an existing domain
- Rockchip driver: Add missing set_platform_dma_ops callback
- Mediatek driver: Adjust the dma-ranges
- Various other small fixes and cleanups
* tag 'iommu-updates-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (82 commits)
iommu: Remove iommu_group_get_by_id()
iommu: Make iommu_release_device() static
iommu/vt-d: Remove BUG_ON in dmar_insert_dev_scope()
iommu/vt-d: Remove a useless BUG_ON(dev->is_virtfn)
iommu/vt-d: Remove BUG_ON in map/unmap()
iommu/vt-d: Remove BUG_ON when domain->pgd is NULL
iommu/vt-d: Remove BUG_ON in handling iotlb cache invalidation
iommu/vt-d: Remove BUG_ON on checking valid pfn range
iommu/vt-d: Make size of operands same in bitwise operations
iommu/vt-d: Remove PASID supervisor request support
iommu/vt-d: Use non-privileged mode for all PASIDs
iommu/vt-d: Remove extern from function prototypes
iommu/vt-d: Do not use GFP_ATOMIC when not needed
iommu/vt-d: Remove unnecessary checks in iopf disabling path
iommu/vt-d: Move PRI handling to IOPF feature path
iommu/vt-d: Move pfsid and ats_qdep calculation to device probe path
iommu/vt-d: Move iopf code from SVA to IOPF enabling path
iommu/vt-d: Allow SVA with device-specific IOPF
dmaengine: idxd: Add enable/disable device IOPF feature
arm64: dts: mt8186: Add dma-ranges for the parent "soc" node
...
- Refactor the DOE infrastructure (Data Object Exchange PCI-config-cycle
mailbox) to be a facility of the PCI core rather than the CXL core.
This is foundational for upcoming support for PCI device-attestation and
PCIe / CXL link encryption.
- Add support for retrieving and injecting poison for CXL memory
expanders. This enabling uses trace-events to convey CXL media error
records to user tooling. It includes translation of device-local
addresses (DPA) to system physical addresses (SPA) and their
corresponding CXL region.
- Fixes for decoder enumeration that missed v6.3-final
- Miscellaneous fixups
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCZE2nNwAKCRDfioYZHlFs
Z5c2AQCTWebok6CD+HN01xnIx+CBWAUQe0QIGR40dT2P6/WGEgEA8wMae0w/FDlc
lQDvSoIyPvy1hGO7Ppb0K2AT6jrQAgU=
=blcC
-----END PGP SIGNATURE-----
Merge tag 'cxl-for-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull compute express link updates from Dan Williams:
"DOE support is promoted from drivers/cxl/ to drivers/pci/ with Bjorn's
blessing, and the CXL core continues to mature its media management
capabilities with support for listing and injecting media errors. Some
late fixes that missed v6.3-final are also included:
- Refactor the DOE infrastructure (Data Object Exchange
PCI-config-cycle mailbox) to be a facility of the PCI core rather
than the CXL core.
This is foundational for upcoming support for PCI
device-attestation and PCIe / CXL link encryption.
- Add support for retrieving and injecting poison for CXL memory
expanders.
This enabling uses trace-events to convey CXL media error records
to user tooling. It includes translation of device-local addresses
(DPA) to system physical addresses (SPA) and their corresponding
CXL region.
- Fixes for decoder enumeration that missed v6.3-final
- Miscellaneous fixups"
* tag 'cxl-for-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (38 commits)
cxl/test: Add mock test for set_timestamp
cxl/mbox: Update CMD_RC_TABLE
tools/testing/cxl: Require CONFIG_DEBUG_FS
tools/testing/cxl: Add a sysfs attr to test poison inject limits
tools/testing/cxl: Use injected poison for get poison list
tools/testing/cxl: Mock the Clear Poison mailbox command
tools/testing/cxl: Mock the Inject Poison mailbox command
cxl/mem: Add debugfs attributes for poison inject and clear
cxl/memdev: Trace inject and clear poison as cxl_poison events
cxl/memdev: Warn of poison inject or clear to a mapped region
cxl/memdev: Add support for the Clear Poison mailbox command
cxl/memdev: Add support for the Inject Poison mailbox command
tools/testing/cxl: Mock support for Get Poison List
cxl/trace: Add an HPA to cxl_poison trace events
cxl/region: Provide region info to the cxl_poison trace event
cxl/memdev: Add trigger_poison_list sysfs attribute
cxl/trace: Add TRACE support for CXL media-error records
cxl/mbox: Add GET_POISON_LIST mailbox command
cxl/mbox: Initialize the poison state
cxl/mbox: Restrict poison cmds to debugfs cxl_raw_allow_all
...
- Add support for stackleak feature. Also allow specifying
architecture-specific stackleak poison function to enable faster
implementation. On s390, the mvc-based implementation helps decrease
typical overhead from a factor of 3 to just 25%
- Convert all assembler files to use SYM* style macros, deprecating the
ENTRY() macro and other annotations. Select ARCH_USE_SYM_ANNOTATIONS
- Improve KASLR to also randomize module and special amode31 code
base load addresses
- Rework decompressor memory tracking to support memory holes and improve
error handling
- Add support for protected virtualization AP binding
- Add support for set_direct_map() calls
- Implement set_memory_rox() and noexec module_alloc()
- Remove obsolete overriding of mem*() functions for KASAN
- Rework kexec/kdump to avoid using nodat_stack to call purgatory
- Convert the rest of the s390 code to use flexible-array member instead
of a zero-length array
- Clean up uaccess inline asm
- Enable ARCH_HAS_MEMBARRIER_SYNC_CORE
- Convert to using CONFIG_FUNCTION_ALIGNMENT and enable
DEBUG_FORCE_FUNCTION_ALIGN_64B
- Resolve last_break in userspace fault reports
- Simplify one-level sysctl registration
- Clean up branch prediction handling
- Rework CPU counter facility to retrieve available counter sets just
once
- Other various small fixes and improvements all over the code
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAmRM8pwACgkQjYWKoQLX
FBjV1AgAlvAhu1XkwOdwqdT4GqE8pcN4XXzydog1MYihrSO2PdgWAxpEW7o2QURN
W+3xa6RIqt7nX2YBiwTanMZ12TYaFY7noGl3eUpD/NhueprweVirVl7VZUEuRoW/
j0mbx77xsVzLfuDFxkpVwE6/j+tTO78kLyjUHwcN9rFVUaL7/orJneDJf+V8fZG0
sHLOv0aljF7Jr2IIkw82lCmW/vdk7k0dACWMXK2kj1H3dIK34B9X4AdKDDf/WKXk
/OSElBeZ93tSGEfNDRIda6iR52xocROaRnQAaDtargKFl9VO0/dN9ADxO+SLNHjN
pFE/9VD6xT/xo4IuZZh/Z3TcYfiLvA==
=Geqx
-----END PGP SIGNATURE-----
Merge tag 's390-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Vasily Gorbik:
- Add support for stackleak feature. Also allow specifying
architecture-specific stackleak poison function to enable faster
implementation. On s390, the mvc-based implementation helps decrease
typical overhead from a factor of 3 to just 25%
- Convert all assembler files to use SYM* style macros, deprecating the
ENTRY() macro and other annotations. Select ARCH_USE_SYM_ANNOTATIONS
- Improve KASLR to also randomize module and special amode31 code base
load addresses
- Rework decompressor memory tracking to support memory holes and
improve error handling
- Add support for protected virtualization AP binding
- Add support for set_direct_map() calls
- Implement set_memory_rox() and noexec module_alloc()
- Remove obsolete overriding of mem*() functions for KASAN
- Rework kexec/kdump to avoid using nodat_stack to call purgatory
- Convert the rest of the s390 code to use flexible-array member
instead of a zero-length array
- Clean up uaccess inline asm
- Enable ARCH_HAS_MEMBARRIER_SYNC_CORE
- Convert to using CONFIG_FUNCTION_ALIGNMENT and enable
DEBUG_FORCE_FUNCTION_ALIGN_64B
- Resolve last_break in userspace fault reports
- Simplify one-level sysctl registration
- Clean up branch prediction handling
- Rework CPU counter facility to retrieve available counter sets just
once
- Other various small fixes and improvements all over the code
* tag 's390-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (118 commits)
s390/stackleak: provide fast __stackleak_poison() implementation
stackleak: allow to specify arch specific stackleak poison function
s390: select ARCH_USE_SYM_ANNOTATIONS
s390/mm: use VM_FLUSH_RESET_PERMS in module_alloc()
s390: wire up memfd_secret system call
s390/mm: enable ARCH_HAS_SET_DIRECT_MAP
s390/mm: use BIT macro to generate SET_MEMORY bit masks
s390/relocate_kernel: adjust indentation
s390/relocate_kernel: use SYM* macros instead of ENTRY(), etc.
s390/entry: use SYM* macros instead of ENTRY(), etc.
s390/purgatory: use SYM* macros instead of ENTRY(), etc.
s390/kprobes: use SYM* macros instead of ENTRY(), etc.
s390/reipl: use SYM* macros instead of ENTRY(), etc.
s390/head64: use SYM* macros instead of ENTRY(), etc.
s390/earlypgm: use SYM* macros instead of ENTRY(), etc.
s390/mcount: use SYM* macros instead of ENTRY(), etc.
s390/crc32le: use SYM* macros instead of ENTRY(), etc.
s390/crc32be: use SYM* macros instead of ENTRY(), etc.
s390/crypto,chacha: use SYM* macros instead of ENTRY(), etc.
s390/amode31: use SYM* macros instead of ENTRY(), etc.
...
- Refactor scripts/kallsyms to make it faster and easier to maintain
- Clean up menuconfig
- Provide Clang with hard-coded target triple instead of CROSS_COMPILE
- Use -z pack-relative-relocs flags instead of --use-android-relr-tags
for arm64 CONFIG_RELR
- Add srcdeb-pkg target to build only a Debian source package
- Add KDEB_SOURCE_COMPRESS option to specify the compression for a
Debian source package
- Misc cleanups and fixes
-----BEGIN PGP SIGNATURE-----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=UuFY
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Refactor scripts/kallsyms to make it faster and easier to maintain
- Clean up menuconfig
- Provide Clang with hard-coded target triple instead of CROSS_COMPILE
- Use -z pack-relative-relocs flags instead of --use-android-relr-tags
for arm64 CONFIG_RELR
- Add srcdeb-pkg target to build only a Debian source package
- Add KDEB_SOURCE_COMPRESS option to specify the compression for a
Debian source package
- Misc cleanups and fixes
* tag 'kbuild-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: deb-pkg: specify targets in debian/rules as .PHONY
sparc: unify sparc32/sparc64 archhelp
kbuild: rpm-pkg: remove kernel-drm PROVIDES
kbuild: deb-pkg: add KDEB_SOURCE_COMPRESS to specify source compression
kbuild: add srcdeb-pkg target
Makefile: use -z pack-relative-relocs
kbuild: clang: do not use CROSS_COMPILE for target triple
kconfig: menuconfig: reorder functions to remove forward declarations
kconfig: menuconfig: remove unused M_EVENT macro
kconfig: menuconfig: remove OLD_NCURSES macro
kbuild: builddeb: Eliminate debian/arch use
scripts/kallsyms: update the usage in the comment block
scripts/kallsyms: decrease expand_symbol() / cleanup_symbol_name() calls
scripts/kallsyms: change the output order
scripts/kallsyms: move compiler-generated symbol patterns to mksysmap
scripts/kallsyms: exclude symbols generated by itself dynamically
scripts/mksysmap: use sed with in-line comments
scripts/mksysmap: remove comments described in nm(1)
scripts/kallsyms: remove redundant code for omitting U and N
kallsyms: expand symbol name into comment for debugging
More additions to the Rust core. Importantly, this adds the pin-init
API, which will be used by other abstractions, such as the
synchronization ones added here too:
- pin-init API: a solution for the safe pinned initialization problem.
This allows to reduce the need for 'unsafe' code in the kernel when
dealing with data structures that require a stable address. Commit
90e53c5e70a6 ("rust: add pin-init API core") contains a nice
introduction -- here is an example of how it looks like:
#[pin_data]
struct Example {
#[pin]
value: Mutex<u32>,
#[pin]
value_changed: CondVar,
}
impl Example {
fn new() -> impl PinInit<Self> {
pin_init!(Self {
value <- new_mutex!(0),
value_changed <- new_condvar!(),
})
}
}
// In a `Box`.
let b = Box::pin_init(Example::new())?;
// In the stack.
stack_pin_init!(let s = Example::new());
- 'sync' module: new types 'LockClassKey' ('struct lock_class_key'),
'Lock', 'Guard', 'Mutex' ('struct mutex'), 'SpinLock'
('spinlock_t'), 'LockedBy' and 'CondVar' (uses 'wait_queue_head_t'),
plus macros such as 'static_lock_class!' and 'new_spinlock!'.
In particular, 'Lock' and 'Guard' are generic implementations that
contain code that is common to all locks. Then, different backends
(the new 'Backend' trait) are implemented and used to define types
like 'Mutex':
type Mutex<T> = Lock<T, MutexBackend>;
In addition, new methods 'assume_init()', 'init_with()' and
'pin_init_with()' for 'UniqueArc<MaybeUninit<T>>' and 'downcast()'
for 'Arc<dyn Any + Send + Sync>'; as well as 'Debug' and 'Display'
implementations for 'Arc' and 'UniqueArc'. Reduced stack usage of
'UniqueArc::try_new_uninit()', too.
- 'types' module: new trait 'AlwaysRefCounted' and new type 'ARef'
(an owned reference to an always-reference-counted object, meant to
be used in wrappers for C types that have their own ref counting
functions).
Moreover, new associated functions 'raw_get()' and 'ffi_init()'
for 'Opaque'.
- New 'task' module with a new type 'Task' ('struct task_struct'), and
a new macro 'current!' to safely get a reference to the current one.
- New 'ioctl' module with new '_IOC*' const functions (equivalent to
the C macros).
- New 'uapi' crate, intended to be accessible by drivers directly.
- 'macros' crate: new 'quote!' macro (similar to the one provided in
userspace by the 'quote' crate); and the 'module!' macro now allows
specifying multiple module aliases.
- 'error' module: new associated functions for the 'Error' type,
such as 'from_errno()' and new functions such as 'to_result()'.
- 'alloc' crate: more fallible 'Vec' methods: 'try_resize` and
'try_extend_from_slice' and the infrastructure (imported from
the Rust standard library) they need.
-----BEGIN PGP SIGNATURE-----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=1I2N
-----END PGP SIGNATURE-----
Merge tag 'rust-6.4' of https://github.com/Rust-for-Linux/linux
Pull rust updates from Miguel Ojeda
"More additions to the Rust core. Importantly, this adds the pin-init
API, which will be used by other abstractions, such as the
synchronization ones added here too:
- pin-init API: a solution for the safe pinned initialization
problem.
This allows to reduce the need for 'unsafe' code in the kernel when
dealing with data structures that require a stable address. Commit
90e53c5e70a6 ("rust: add pin-init API core") contains a nice
introduction -- here is an example of how it looks like:
#[pin_data]
struct Example {
#[pin]
value: Mutex<u32>,
#[pin]
value_changed: CondVar,
}
impl Example {
fn new() -> impl PinInit<Self> {
pin_init!(Self {
value <- new_mutex!(0),
value_changed <- new_condvar!(),
})
}
}
// In a `Box`.
let b = Box::pin_init(Example::new())?;
// In the stack.
stack_pin_init!(let s = Example::new());
- 'sync' module:
New types 'LockClassKey' ('struct lock_class_key'), 'Lock',
'Guard', 'Mutex' ('struct mutex'), 'SpinLock' ('spinlock_t'),
'LockedBy' and 'CondVar' (uses 'wait_queue_head_t'), plus macros
such as 'static_lock_class!' and 'new_spinlock!'.
In particular, 'Lock' and 'Guard' are generic implementations that
contain code that is common to all locks. Then, different backends
(the new 'Backend' trait) are implemented and used to define types
like 'Mutex':
type Mutex<T> = Lock<T, MutexBackend>;
In addition, new methods 'assume_init()', 'init_with()' and
'pin_init_with()' for 'UniqueArc<MaybeUninit<T>>' and 'downcast()'
for 'Arc<dyn Any + Send + Sync>'; as well as 'Debug' and 'Display'
implementations for 'Arc' and 'UniqueArc'. Reduced stack usage of
'UniqueArc::try_new_uninit()', too.
- 'types' module:
New trait 'AlwaysRefCounted' and new type 'ARef' (an owned
reference to an always-reference-counted object, meant to be used
in wrappers for C types that have their own ref counting
functions).
Moreover, new associated functions 'raw_get()' and 'ffi_init()' for
'Opaque'.
- New 'task' module with a new type 'Task' ('struct task_struct'),
and a new macro 'current!' to safely get a reference to the current
one.
- New 'ioctl' module with new '_IOC*' const functions (equivalent to
the C macros).
- New 'uapi' crate, intended to be accessible by drivers directly.
- 'macros' crate: new 'quote!' macro (similar to the one provided in
userspace by the 'quote' crate); and the 'module!' macro now allows
specifying multiple module aliases.
- 'error' module:
New associated functions for the 'Error' type, such as
'from_errno()' and new functions such as 'to_result()'.
- 'alloc' crate:
More fallible 'Vec' methods: 'try_resize` and
'try_extend_from_slice' and the infrastructure (imported from the
Rust standard library) they need"
* tag 'rust-6.4' of https://github.com/Rust-for-Linux/linux: (44 commits)
rust: ioctl: Add ioctl number manipulation functions
rust: uapi: Add UAPI crate
rust: sync: introduce `CondVar`
rust: lock: add `Guard::do_unlocked`
rust: sync: introduce `LockedBy`
rust: introduce `current`
rust: add basic `Task`
rust: introduce `ARef`
rust: lock: introduce `SpinLock`
rust: lock: introduce `Mutex`
rust: sync: introduce `Lock` and `Guard`
rust: sync: introduce `LockClassKey`
MAINTAINERS: add Benno Lossin as Rust reviewer
rust: init: broaden the blanket impl of `Init`
rust: sync: add functions for initializing `UniqueArc<MaybeUninit<T>>`
rust: sync: reduce stack usage of `UniqueArc::try_new_uninit`
rust: types: add `Opaque::ffi_init`
rust: prelude: add `pin-init` API items to prelude
rust: init: add `Zeroable` trait and `init::zeroed` function
rust: init: add `stack_pin_init!` macro
...
Group some variables based on their sizes to reduce holes.
On x86_64, this shrinks the size of 'struct ceph_snapid_map' from 72 to 64
bytes.
When such a structure is allocated, because of the way memory allocation
works, when 72 bytes were requested, 96 bytes were allocated.
So, on x86_64, this change saves 32 bytes per allocation and has the
structure fit in a single cacheline.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
When exporting the kceph to NFS it may pass a DCACHE_DISCONNECTED
dentry for the link operation. Then it will parse this dentry as a
snapdir, and the mds will fail the link request as -EROFS.
MDS allow clients to pass a ino# instead of a path.
Link: https://tracker.ceph.com/issues/59515
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
When trimming the caps and just after the 'session->s_cap_lock' is
released in ceph_iterate_session_caps() the cap maybe removed by
another thread, and when using the stale cap memory in the callbacks
it will trigger use-after-free crash.
We need to check the existence of the cap just after the 'ci->i_ceph_lock'
being acquired. And do nothing if it's already removed.
Cc: stable@vger.kernel.org
Link: https://tracker.ceph.com/issues/43272
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Luís Henriques <lhenriques@suse.de>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
While the mapped IOs continue if we try to flush a file's buffer
we can see that the fsync() won't complete until the IOs finish.
This is analogous to Jan Kara's commit (f446daaea9d4 mm: implement
writeback livelock avoidance using page tagging), we will try to
avoid livelocks of writeback when some steadily creates dirty pages
in a mapping we are writing out.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
If the xattr's value size is long enough the kernel will warn and
then will fail the xfstests test case.
Just print part of the value string if it's too long.
At the same time fix the function name issue in the debug logs.
Link: https://tracker.ceph.com/issues/58404
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
- relocate the LoongArch kernel if the preferred address is already
occupied;
- implement BTI annotations for arm64 EFI stub and zboot images;
- clean up arm64 zboot Kbuild rules for injecting the kernel code size.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQQm/3uucuRGn1Dmh0wbglWLn0tXAUCZEwUOwAKCRAwbglWLn0t
XMNzAQChdPim0N+l2G4XLa1g8WCGany/+6/B9GHPJVcmQ25zLQD/UaNvAofkHwjR
Y3P3ZEY1SPEA+UJBL/BTI0wO9/XgpAA=
=hGWP
-----END PGP SIGNATURE-----
Merge tag 'efi-next-for-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
- relocate the LoongArch kernel if the preferred address is already
occupied
- implement BTI annotations for arm64 EFI stub and zboot images
- clean up arm64 zboot Kbuild rules for injecting the kernel code size
* tag 'efi-next-for-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi/zboot: arm64: Grab code size from ELF symbol in payload
efi/zboot: arm64: Inject kernel code size symbol into the zboot payload
efi/zboot: Set forward edge CFI compat header flag if supported
efi/zboot: Add BSS padding before compression
arm64: efi: Enable BTI codegen and add PE/COFF annotation
efi/pe: Import new BTI/IBT header flags from the spec
efi/loongarch: Reintroduce efi_relocate_kernel() to relocate kernel
- power-supply core support for automatic handling of constant
battery data supplied by firmware
- generic-adc-battery: major cleanup
- axp288_charger: fix ACPI issues on x86 Android tablets
- rk817: cleanup and fix handling for low state of charge
-----BEGIN PGP SIGNATURE-----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=hWo9
-----END PGP SIGNATURE-----
Merge tag 'for-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
- power-supply core support for automatic handling of constant battery
data supplied by firmware
- generic-adc-battery: major cleanup
- axp288_charger: fix ACPI issues on x86 Android tablets
- rk817: cleanup and fix handling for low state of charge
* tag 'for-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (26 commits)
power: supply: rk817: Fix low SOC bugs
power: supply: rk817: Drop unneeded debugging code
power: supply: axp288_charger: Use alt usb-id extcon on some x86 android tablets
power: supply: generic-adc-battery: style fixes
power: supply: generic-adc-battery: improve error message
power: supply: generic-adc-battery: update copyright info
power: supply: generic-adc-battery: add DT support
power: supply: generic-adc-battery: add temperature support
power: supply: generic-adc-battery: simplify read_channel logic
power: supply: generic-adc-battery: use simple-battery API
power: supply: generic-adc-battery: drop memory alloc error message
power: supply: generic-adc-battery: drop charge now support
power: supply: generic-adc-battery: drop jitter delay support
power: supply: generic-adc-battery: fix unit scaling
power: supply: generic-adc-battery: convert to managed resources
power: supply: core: auto-exposure of simple-battery data
dt-bindings: power: supply: adc-battery: add binding
power: supply: bq256xx: Support to disable charger
power: supply: charger-manager: Use of_property_read_bool() for boolean properties
power: reset: qcom-pon: drop of_match_ptr for ID table
...
are a couple patches to the core clk framework, but they're all basically
cleanups or debugging aids. The driver updates and new additions are dominated
in the diffstat by Qualcomm and MediaTek drivers. Qualcomm gained a handful of
new drivers for various SoCs, and MediaTek gained a bunch of drivers for
MT8188. The MediaTek drivers are being modernized as well, so there are
updates all over that vendor's clk drivers. There's also a couple other new clk
drivers in here, for example the Starfive JH7110 SoC support is added.
Outside of the two major SoC vendors though, we have the usual collection of
non-critical fixes and cleanups to various clk drivers. It's good to see that
we're getting more cleanups and modernization patches. Maybe one day we'll be
able to properly split clk providers from clk consumers.
Core:
- Print an informational message before disabling unused clks
New Drivers:
- BCM63268 timer clock and reset controller
- Frequency Hopping (FHCTL) on MediaTek MT6795, MT8173, MT8192 and
MT8195 SoCs
- Mediatek MT8188 SoC clk drivers
- Clock driver for Sunplus SP7021 SoC
- Clk driver support for Loongson-2 SoCs
- Clock driver for Skyworks Si521xx I2C PCIe clock generators
- Initial Starfive JH7110 clk/reset support
- Global clock controller drivers for Qualcomm SM7150, IPQ9574, MSM8917 and IPQ5332 SoCs
- GPU clock controller drivers for SM6115, SM6125, SM6375 and SA8775P SoCs
Updates:
- Shrink size of clk_fractional_divider a little
- Convert various clk drivers to devm_of_clk_add_hw_provider()
- Convert platform clk drivers to remove_new()
- Converted most Mediatek clock drivers to struct platform_driver
- MediaTek clock drivers can be built as modules
- Reimplement Loongson-1 clk driver with DT support
- Migrate socfpga clk driver to of_clk_add_hw_provider()
- Support for i3c clks on Aspeed ast2600 SoCs
- Add clock generic devm_clk_hw_register_gate_parent_data
- Add audiomix block control for i.MX8MP
- Add support for determine_rate to i.MX composite-8m
- Let the LCDIF Pixel clock of i.MX8MM and i.MX8MN set parent rate
- Provide clock name in error message for clk-gpr-mux on get parent failure
- Drop duplicate imx_clk_mux_flags macro
- Register the i.MX8MP Media Disp2 Pix clock as bus clock
- Add Media LDB root clock to i.MX8MP
- Make i.MX8MP nand_usdhc_bus clock as non-critical
- Fix the rate table for i.MX fracn-gppll
- Disable HW control for the fracn-gppll in order to be controlled by
register write
- Add support for interger PLL in fracn-gppll
- Add mcore_booted module parameter to i.MX93 provider
- Add NIC, A55 and ARM PLL clocks to i.MX93
- Fix i.MX8ULP XBAR_DIVBUS and AD_SLOW clock parents
- Use "divider closest" clock type for PLL4_PFD dividers on i.MX8ULP to
get more accurate clock rates
- Mark the MU0_Bi and TPM5 clocks on i.MX8ULP as critical
- Update some of the i.MX critical clocks flags to allow glitchless
on-the-fly rate change.
- Add I2C5 clock on Renesas R-Car V3H
- Exynos850: Add CMU_G3D clock controller for the Mali GPU
- Extract Exynos5433 (ARM64) clock controller power management code to
common driver parts
- Exynos850: make PMU_ALIVE_PCLK clock critical
- Add Audio, thermal, camera (CSI-2), Image Signal Processor/Channel
Selector (ISPCS), and video capture (VIN) clocks on Renesas R-Car V4H
- Add video capture (VIN) clocks on Renesas R-Car V3H
- Add Cortex-A53 System CPU (Z2) clocks on Renesas R-Car V3M and V3H
- Support for Stromer Plus PLL on Qualcomm IPQ5332
- Add a missing reset to Qualcomm QCM2290
- Migrate Qualcomm IPQ4019 to clk_parent_data
- Make USB GDSCs enter retention state when disabled on Qualcomm SM6375,
MSM8996 and MSM8998 SoCs
- Set floor rounding clk_ops for Qualcomm QCM2290 SDCC2 clk
- Add two EMAC GDSCs on Qualcomm SC8280XP
- Use shared rcg clk ops in Qualcomm SM6115 GCC
- Park Qualcomm SM8350 PCIe PIPE clks when disabled
- Add GDSCs to Qualcomm SC7280 LPASS audio clock controller
- Add missing XO clocks to Qualcomm MSM8226 and MSM8974
- Convert some Qualcomm clk DT bindings to YAML
- Reparenting fix for the clock supplying camera modules on Rockchip rk3399
- Mark more critical (bus-)clocks on Rockchip rk3588
-----BEGIN PGP SIGNATURE-----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=bTtL
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"Nothing looks out of the ordinary in this batch of clk driver updates.
There are a couple patches to the core clk framework, but they're all
basically cleanups or debugging aids. The driver updates and new
additions are dominated in the diffstat by Qualcomm and MediaTek
drivers. Qualcomm gained a handful of new drivers for various SoCs,
and MediaTek gained a bunch of drivers for MT8188. The MediaTek
drivers are being modernized as well, so there are updates all over
that vendor's clk drivers. There's also a couple other new clk drivers
in here, for example the Starfive JH7110 SoC support is added.
Outside of the two major SoC vendors though, we have the usual
collection of non-critical fixes and cleanups to various clk drivers.
It's good to see that we're getting more cleanups and modernization
patches. Maybe one day we'll be able to properly split clk providers
from clk consumers.
Core:
- Print an informational message before disabling unused clks
New Drivers:
- BCM63268 timer clock and reset controller
- Frequency Hopping (FHCTL) on MediaTek MT6795, MT8173, MT8192 and
MT8195 SoCs
- Mediatek MT8188 SoC clk drivers
- Clock driver for Sunplus SP7021 SoC
- Clk driver support for Loongson-2 SoCs
- Clock driver for Skyworks Si521xx I2C PCIe clock generators
- Initial Starfive JH7110 clk/reset support
- Global clock controller drivers for Qualcomm SM7150, IPQ9574,
MSM8917 and IPQ5332 SoCs
- GPU clock controller drivers for SM6115, SM6125, SM6375 and SA8775P
SoCs
Updates:
- Shrink size of clk_fractional_divider a little
- Convert various clk drivers to devm_of_clk_add_hw_provider()
- Convert platform clk drivers to remove_new()
- Converted most Mediatek clock drivers to struct platform_driver
- MediaTek clock drivers can be built as modules
- Reimplement Loongson-1 clk driver with DT support
- Migrate socfpga clk driver to of_clk_add_hw_provider()
- Support for i3c clks on Aspeed ast2600 SoCs
- Add clock generic devm_clk_hw_register_gate_parent_data
- Add audiomix block control for i.MX8MP
- Add support for determine_rate to i.MX composite-8m
- Let the LCDIF Pixel clock of i.MX8MM and i.MX8MN set parent rate
- Provide clock name in error message for clk-gpr-mux on get parent
failure
- Drop duplicate imx_clk_mux_flags macro
- Register the i.MX8MP Media Disp2 Pix clock as bus clock
- Add Media LDB root clock to i.MX8MP
- Make i.MX8MP nand_usdhc_bus clock as non-critical
- Fix the rate table for i.MX fracn-gppll
- Disable HW control for the fracn-gppll in order to be controlled by
register write
- Add support for interger PLL in fracn-gppll
- Add mcore_booted module parameter to i.MX93 provider
- Add NIC, A55 and ARM PLL clocks to i.MX93
- Fix i.MX8ULP XBAR_DIVBUS and AD_SLOW clock parents
- Use "divider closest" clock type for PLL4_PFD dividers on i.MX8ULP
to get more accurate clock rates
- Mark the MU0_Bi and TPM5 clocks on i.MX8ULP as critical
- Update some of the i.MX critical clocks flags to allow glitchless
on-the-fly rate change.
- Add I2C5 clock on Renesas R-Car V3H
- Exynos850: Add CMU_G3D clock controller for the Mali GPU
- Extract Exynos5433 (ARM64) clock controller power management code
to common driver parts
- Exynos850: make PMU_ALIVE_PCLK clock critical
- Add Audio, thermal, camera (CSI-2), Image Signal Processor/Channel
Selector (ISPCS), and video capture (VIN) clocks on Renesas R-Car
V4H
- Add video capture (VIN) clocks on Renesas R-Car V3H
- Add Cortex-A53 System CPU (Z2) clocks on Renesas R-Car V3M and V3H
- Support for Stromer Plus PLL on Qualcomm IPQ5332
- Add a missing reset to Qualcomm QCM2290
- Migrate Qualcomm IPQ4019 to clk_parent_data
- Make USB GDSCs enter retention state when disabled on Qualcomm
SM6375, MSM8996 and MSM8998 SoCs
- Set floor rounding clk_ops for Qualcomm QCM2290 SDCC2 clk
- Add two EMAC GDSCs on Qualcomm SC8280XP
- Use shared rcg clk ops in Qualcomm SM6115 GCC
- Park Qualcomm SM8350 PCIe PIPE clks when disabled
- Add GDSCs to Qualcomm SC7280 LPASS audio clock controller
- Add missing XO clocks to Qualcomm MSM8226 and MSM8974
- Convert some Qualcomm clk DT bindings to YAML
- Reparenting fix for the clock supplying camera modules on Rockchip
rk3399
- Mark more critical (bus-)clocks on Rockchip rk3588"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (290 commits)
clk: qcom: gcc-sc8280xp: Add EMAC GDSCs
clk: starfive: Delete the redundant dev_set_drvdata() in JH7110 clock drivers
clk: rockchip: rk3588: make gate linked clocks critical
clk: qcom: dispcc-qcm2290: Remove inexistent DSI1PHY clk
clk: qcom: add the GPUCC driver for sa8775p
dt-bindings: clock: qcom: describe the GPUCC clock for SA8775P
clk: qcom: gcc-sm8350: fix PCIe PIPE clocks handling
clk: qcom: lpassaudiocc-sc7280: Add required gdsc power domain clks in lpass_cc_sc7280_desc
clk: qcom: lpasscc-sc7280: Skip qdsp6ss clock registration
dt-bindings: clock: qcom,sc7280-lpasscc: Add qcom,adsp-pil-mode property
clk: starfive: Avoid casting iomem pointers
clk: microchip: fix potential UAF in auxdev release callback
clk: qcom: rpm: Use managed `of_clk_add_hw_provider()`
clk: mediatek: fhctl: Mark local variables static
clk: sifive: make SiFive clk drivers depend on ARCH_ symbols
clk: uniphier: Use managed `of_clk_add_hw_provider()`
clk: si5351: Use managed `of_clk_add_hw_provider()`
clk: si570: Use managed `of_clk_add_hw_provider()`
clk: si514: Use managed `of_clk_add_hw_provider()`
clk: lmk04832: Use managed `of_clk_add_hw_provider()`
...
Usual wide collection of unrelated items in drivers:
- Driver bug fixes and treewide cleanups in hfi1, siw, qib, mlx5, rxe,
usnic, usnic, bnxt_re, ocrdma, iser
* Unnecessary NULL checks
* kmap obsolescence
* pci_enable_pcie_error_reporting() obsolescence
* Unused variables and macros
* trace event related warnings
* casting warnings
- Code cleanups for irdm and erdma
- EFA reporting of 128 byte PCIe TLP support
- mlx5 more agressively uses the out of order HW feature
- Big rework of how state machines and tasks work in rxe
- Fix a syzkaller found crash netdev refcount leak in siw
- bnxt_re revises their HW description header
- Congestion control for bnxt_re
- Use mmu_notifiers more safely in hfi1
- mlx5 gets better support for PCIe relaxed ordering inside VMs
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCZEva5wAKCRCFwuHvBreF
YZFmAQC9T3b/XQ3bRknYciuzbatC98o9xB0FTqmEFYGj+Y2lVAD9EEVe3HKfHfi3
t/GxXYB5r22oxg5bgsblZfEdEdTVCg8=
=akMm
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"Usual wide collection of unrelated items in drivers:
- Driver bug fixes and treewide cleanups in hfi1, siw, qib, mlx5,
rxe, usnic, usnic, bnxt_re, ocrdma, iser:
- remove unnecessary NULL checks
- kmap obsolescence
- pci_enable_pcie_error_reporting() obsolescence
- unused variables and macros
- trace event related warnings
- casting warnings
- Code cleanups for irdm and erdma
- EFA reporting of 128 byte PCIe TLP support
- mlx5 more agressively uses the out of order HW feature
- Big rework of how state machines and tasks work in rxe
- Fix a syzkaller found crash netdev refcount leak in siw
- bnxt_re revises their HW description header
- Congestion control for bnxt_re
- Use mmu_notifiers more safely in hfi1
- mlx5 gets better support for PCIe relaxed ordering inside VMs"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (81 commits)
RDMA/efa: Add rdma write capability to device caps
RDMA/mlx5: Use correct device num_ports when modify DC
RDMA/irdma: Drop spurious WQ_UNBOUND from alloc_ordered_workqueue() call
RDMA/rxe: Fix spinlock recursion deadlock on requester
RDMA/mlx5: Fix flow counter query via DEVX
RDMA/rxe: Protect QP state with qp->state_lock
RDMA/rxe: Move code to check if drained to subroutine
RDMA/rxe: Remove qp->req.state
RDMA/rxe: Remove qp->comp.state
RDMA/rxe: Remove qp->resp.state
RDMA/mlx5: Allow relaxed ordering read in VFs and VMs
net/mlx5: Update relaxed ordering read HCA capabilities
RDMA/mlx5: Check pcie_relaxed_ordering_enabled() in UMR
RDMA/mlx5: Remove pcie_relaxed_ordering_enabled() check for RO write
RDMA: Add ib_virt_dma_to_page()
RDMA/rxe: Fix the error "trying to register non-static key in rxe_cleanup_task"
RDMA/irdma: Slightly optimize irdma_form_ah_cm_frame()
RDMA/rxe: Fix incorrect TASKLET_STATE_SCHED check in rxe_task.c
IB/hfi1: Place struct mmu_rb_handler on cache line start
IB/hfi1: Fix bugs with non-PAGE_SIZE-end multi-iovec user SDMA requests
...
Lukas warned that ARCH_WANT_HUGETLB_PAGE_OPTIMIZE_VMEMMAP had been
renamed in the mm tree & that RISC-V would need a fixup as part of the
merge. The warning was missed however, and RISC-V is selecting the
orphaned Kconfig option.
Fixes: 89d77f71f493 ("Merge tag 'riscv-for-linus-6.4-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux")
Reported-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>.
Link: https://lore.kernel.org/linux-riscv/CAKXUXMyVeg2kQK_edKHtMD3eADrDK_PKhCSVkMrLDdYgTQQ5rg@mail.gmail.com/
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20230429-trilogy-jolly-12bf5c53d62d@spud
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
sbi_probe_extension() is specified with "Returns 0 if the given SBI
extension ID (EID) is not available, or 1 if it is available unless
defined as any other non-zero value by the implementation."
Additionally, sbiret.value is a long. Fix the implementation to
ensure any nonzero long value is considered a success, rather
than only positive int values.
Fixes: b9dcd9e41587 ("RISC-V: Add basic support for SBI v0.2")
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230427163626.101042-1-ajones@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
create_fdt_early_page_table() explicitly uses early_pg_dir for
32-bit fdt mapping and the pgdir parameter is redundant here.
So remove it and its caller.
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Song Shuai <suagrfillet@gmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Fixes: ef69d2559fe9 ("riscv: Move early dtb mapping into the fixmap region")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230426100009.685435-1-suagrfillet@gmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Sia Jee Heng <jeeheng.sia@starfivetech.com> says:
This series adds RISC-V Hibernation/suspend to disk support.
Low level Arch functions were created to support hibernation.
swsusp_arch_suspend() relies code from __cpu_suspend_enter() to write
cpu state onto the stack, then calling swsusp_save() to save the memory
image.
Arch specific hibernation header is implemented and is utilized by the
arch_hibernation_header_restore() and arch_hibernation_header_save()
functions. The arch specific hibernation header consists of satp, hartid,
and the cpu_resume address. The kernel built version is also need to be
saved into the hibernation image header to making sure only the same
kernel is restore when resume.
swsusp_arch_resume() creates a temporary page table that covering only
the linear map. It copies the restore code to a 'safe' page, then start to
restore the memory image. Once completed, it restores the original
kernel's page table. It then calls into __hibernate_cpu_resume()
to restore the CPU context. Finally, it follows the normal hibernation
path back to the hibernation core.
To enable hibernation/suspend to disk into RISCV, the below config
need to be enabled:
- CONFIG_HIBERNATION
- CONFIG_ARCH_HIBERNATION_HEADER
- CONFIG_ARCH_HIBERNATION_POSSIBLE
At high-level, this series includes the following changes:
1) Change suspend_save_csrs() and suspend_restore_csrs()
to public function as these functions are common to
suspend/hibernation. (patch 1)
2) Refactor the common code in the __cpu_resume_enter() function and
__hibernate_cpu_resume() function. The common code are used by
hibernation and suspend. (patch 2)
3) Enhance kernel_page_present() function to support huge page. (patch 3)
4) Add arch/riscv low level functions to support
hibernation/suspend to disk. (patch 4)
* b4-shazam-merge:
RISC-V: Add arch functions to support hibernation/suspend-to-disk
RISC-V: mm: Enable huge page support to kernel_page_present() function
RISC-V: Factor out common code of __cpu_resume_enter()
RISC-V: Change suspend_save_csrs and suspend_restore_csrs to public function
Link: https://lore.kernel.org/r/20230330064321.1008373-1-jeeheng.sia@starfivetech.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
When building allmodconfig with clang and its integrated assembler and
linking with a version of GNU ld prior to 2.36, the following link error
occurs:
riscv64-linux-gnu-ld: .init.data has both ordered [`__patchable_function_entries' in init/main.o] and unordered [`.init_array.0' in kernel/trace/trace_benchmark.o] sections
riscv64-linux-gnu-ld: final link failed: bad value
This is the same error addressed by commit 45bd8951806e ("arm64: Improve
HAVE_DYNAMIC_FTRACE_WITH_REGS selection for clang") for arm64. See that
changelog for a full description of why this error occurs with this
combination of tools.
In a similar manner as that change, restrict the
CONFIG_HAVE_DYNAMIC_FTRACE selection to combinations of tools known to
work so that there are no errors.
Link: https://github.com/ClangBuiltLinux/linux/issues/1817
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230404-riscv-dynamic-ftrace-checks-clang-v1-1-0ce296b7d423@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Low level Arch functions were created to support hibernation.
swsusp_arch_suspend() relies code from __cpu_suspend_enter() to write
cpu state onto the stack, then calling swsusp_save() to save the memory
image.
Arch specific hibernation header is implemented and is utilized by the
arch_hibernation_header_restore() and arch_hibernation_header_save()
functions. The arch specific hibernation header consists of satp, hartid,
and the cpu_resume address. The kernel built version is also need to be
saved into the hibernation image header to making sure only the same
kernel is restore when resume.
swsusp_arch_resume() creates a temporary page table that covering only
the linear map. It copies the restore code to a 'safe' page, then start
to restore the memory image. Once completed, it restores the original
kernel's page table. It then calls into __hibernate_cpu_resume()
to restore the CPU context. Finally, it follows the normal hibernation
path back to the hibernation core.
To enable hibernation/suspend to disk into RISCV, the below config
need to be enabled:
- CONFIG_HIBERNATION
- CONFIG_ARCH_HIBERNATION_HEADER
- CONFIG_ARCH_HIBERNATION_POSSIBLE
Signed-off-by: Sia Jee Heng <jeeheng.sia@starfivetech.com>
Reviewed-by: Ley Foon Tan <leyfoon.tan@starfivetech.com>
Reviewed-by: Mason Huo <mason.huo@starfivetech.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20230330064321.1008373-5-jeeheng.sia@starfivetech.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Currently kernel_page_present() function doesn't support huge page
detection causes the function to mistakenly return false to the
hibernation core.
Add huge page detection to the function to solve the problem.
Fixes: 9e953cda5cdf ("riscv: Introduce huge page support for 32/64bit kernel")
Signed-off-by: Sia Jee Heng <jeeheng.sia@starfivetech.com>
Reviewed-by: Ley Foon Tan <leyfoon.tan@starfivetech.com>
Reviewed-by: Mason Huo <mason.huo@starfivetech.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20230330064321.1008373-4-jeeheng.sia@starfivetech.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The cpu_resume() function is very similar for the suspend to disk and
suspend to ram cases. Factor out the common code into suspend_restore_csrs
macro and suspend_restore_regs macro.
Signed-off-by: Sia Jee Heng <jeeheng.sia@starfivetech.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230330064321.1008373-3-jeeheng.sia@starfivetech.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Currently suspend_save_csrs() and suspend_restore_csrs() functions are
statically defined in the suspend.c. Change the function's attribute
to public so that the functions can be used by hibernation as well.
Signed-off-by: Sia Jee Heng <jeeheng.sia@starfivetech.com>
Reviewed-by: Ley Foon Tan <leyfoon.tan@starfivetech.com>
Reviewed-by: Mason Huo <mason.huo@starfivetech.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20230330064321.1008373-2-jeeheng.sia@starfivetech.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
-----BEGIN PGP SIGNATURE-----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=DweL
-----END PGP SIGNATURE-----
Merge tag '6.4-rc-ksmbd-server-fixes' of git://git.samba.org/ksmbd
Pull ksmbd server updates from Steve French:
- SMB3.1.1 negotiate context fixes and cleanup
- new lock_rename_child VFS helper
- ksmbd fix to avoid unlink race and to use the new VFS helper to avoid
rename race
* tag '6.4-rc-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: fix racy issue from using ->d_parent and ->d_name
ksmbd: remove unused compression negotiate ctx packing
ksmbd: avoid duplicate negotiate ctx offset increments
ksmbd: set NegotiateContextCount once instead of every inc
fs: introduce lock_rename_child() helper
ksmbd: remove internal.h include
The big ticket item for this release is support for RPC-with-TLS
[RFC 9289] has been added to the Linux NFS server. The goal is to
provide a simple-to-deploy, low-overhead in-transit confidentiality
and peer authentication mechanism. It can supplement NFS Kerberos
and it can protect the use of legacy non-cryptographic user
authentication flavors such as AUTH_SYS. The TLS Record protocol is
handled entirely by kTLS, meaning it can use either software
encryption or offload encryption to smart NICs.
Work continues on improving NFSD's open file cache. Among the many
clean-ups in that area is a patch to convert the rhashtable to use
the list-hashing version of that data structure.
-----BEGIN PGP SIGNATURE-----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=lA2+
-----END PGP SIGNATURE-----
Merge tag 'nfsd-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd updates from Chuck Lever:
"The big ticket item for this release is that support for RPC-with-TLS
[RFC 9289] has been added to the Linux NFS server.
The goal is to provide a simple-to-deploy, low-overhead in-transit
confidentiality and peer authentication mechanism. It can supplement
NFS Kerberos and it can protect the use of legacy non-cryptographic
user authentication flavors such as AUTH_SYS. The TLS Record protocol
is handled entirely by kTLS, meaning it can use either software
encryption or offload encryption to smart NICs.
Aside from that, work continues on improving NFSD's open file cache.
Among the many clean-ups in that area is a patch to convert the
rhashtable to use the list-hashing version of that data structure"
* tag 'nfsd-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (31 commits)
NFSD: Handle new xprtsec= export option
SUNRPC: Support TLS handshake in the server-side TCP socket code
NFSD: Clean up xattr memory allocation flags
NFSD: Fix problem of COMMIT and NFS4ERR_DELAY in infinite loop
SUNRPC: Clear rq_xid when receiving a new RPC Call
SUNRPC: Recognize control messages in server-side TCP socket code
SUNRPC: Be even lazier about releasing pages
SUNRPC: Convert svc_xprt_release() to the release_pages() API
SUNRPC: Relocate svc_free_res_pages()
nfsd: simplify the delayed disposal list code
SUNRPC: Ignore return value of ->xpo_sendto
SUNRPC: Ensure server-side sockets have a sock->file
NFSD: Watch for rq_pages bounds checking errors in nfsd_splice_actor()
sunrpc: simplify two-level sysctl registration for svcrdma_parm_table
SUNRPC: return proper error from get_expiry()
lockd: add some client-side tracepoints
nfs: move nfs_fhandle_hash to common include file
lockd: server should unlock lock if client rejects the grant
lockd: fix races in client GRANTED_MSG wait logic
lockd: move struct nlm_wait to lockd.h
...
New Features:
* Convert the readdir path to use folios
* Convert the NFS fscache code to use netfs
Bugfixes and Cleanups:
* Always send a RECLAIM_COMPLETE after establishing a lease
* Simplify sysctl registrations and other cleanups
* Handle out-of-order write replies on NFS v3
* Have sunrpc call_bind_status use standard hard/soft task semantics
* Other minor cleanups
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEnZ5MQTpR7cLU7KEp18tUv7ClQOsFAmRMI04ACgkQ18tUv7Cl
QOuCNQ//SkQm8aOM4DkYFeDIObye6xMzgtWrB25grYNG4a/DcYqb5kNcbmI5l1tE
Tus8KMZAWSpwa0m8ALctzp+pZQWQkY/svsqqHrKIGUHBI8F0OinVCqc2MzNN75WX
m/1wELW6ek9RBL5BoJtAPt+Qu8/jP6KD64Zot7snBeUrzreaZDcz0HM+EcQhi7X7
qd5XS0/cA2eLEBBQcQdFpRhHvgW12BMYM/zp3/ER5H52L2iAlZunGWw+Nqs8ueOR
D7K2+CF1sV1k6hYbLWNoaF2J6PZr5dRpc6gSq4fLP4WUKjqQwmQp8cm9iLpf6jGa
a+Y7t8aj7vup8jVCVGWYWZA2G2gi6jWmxxWudkJwfAa1E45t1B4/C0udwlxR20OO
XI2Bhe5YwTURgSOvOS9QTZJpQN4qfpEL0NoAmAT5fAHBQ2CXDrMlSIxPS7U6LO9q
YqwIHcAHvYVnbD45IUh2Zjbp65mRb1VkU6WzOyK1/sNHEyYpubIWXB/yLaA3oGge
V3xUgvlTzLVzzyQfwiRfzAD1P5/USaXE/B36c4itfCr5rJnAfsiBP3gk0o9yq18J
3Yb6olrmc9CzeA7PN88uEus4VZHbaE9OktRFIjJ22jlLQEY4xougdE5asY1XX8F+
OKLLLeeCrsbvrANB9XcLVsLqdMYvsd0VaCX9HtN3UP+7Lod5T10=
=gpBC
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-6.4-1' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client updates from Anna Schumaker:
"New Features:
- Convert the readdir path to use folios
- Convert the NFS fscache code to use netfs
Bugfixes and Cleanups:
- Always send a RECLAIM_COMPLETE after establishing a lease
- Simplify sysctl registrations and other cleanups
- Handle out-of-order write replies on NFS v3
- Have sunrpc call_bind_status use standard hard/soft task semantics
- Other minor cleanups"
* tag 'nfs-for-6.4-1' of git://git.linux-nfs.org/projects/anna/linux-nfs:
NFSv4.2: Rework scratch handling for READ_PLUS
NFS: Cleanup unused rpc_clnt variable
NFS: set varaiable nfs_netfs_debug_id storage-class-specifier to static
SUNRPC: remove the maximum number of retries in call_bind_status
NFS: Convert readdir page array functions to use a folio
NFS: Convert the readdir array-of-pages into an array-of-folios
NFSv3: handle out-of-order write replies.
NFS: Remove fscache specific trace points and NFS_INO_FSCACHE bit
NFS: Remove all NFSIOS_FSCACHE counters due to conversion to netfs API
NFS: Convert buffered read paths to use netfs when fscache is enabled
NFS: Configure support for netfs when NFS fscache is configured
NFS: Rename readpage_async_filler to nfs_read_add_folio
sunrpc: simplify one-level sysctl registration for debug_table
sunrpc: move sunrpc_table and proc routines above
sunrpc: simplify one-level sysctl registration for xs_tunables_table
sunrpc: simplify one-level sysctl registration for xr_tunables_table
nfs: simplify two-level sysctl registration for nfs_cb_sysctls
nfs: simplify two-level sysctl registration for nfs4_cb_sysctls
lockd: simplify two-level sysctl registration for nlm_sysctls
NFSv4.1: Always send a RECLAIM_COMPLETE after establishing lease
-----BEGIN PGP SIGNATURE-----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=xlIh
-----END PGP SIGNATURE-----
Merge tag 'ntfs3_for_6.4' of https://github.com/Paragon-Software-Group/linux-ntfs3
Pull ntfs3 updates from Konstantin Komarov:
"New code:
- add missed "nocase" in ntfs_show_options
- extend information on failures/errors
- small optimizations
Fixes:
- some logic errors
- some dead code was removed
- code is refactored and reformatted according to the new version of
clang-format
Code removal:
- 'noacsrules' option.
Currently, this option does not work properly, and its use leads to
unstable results. If we figure out how to implement it without
errors, we will add it later
- writepage"
* tag 'ntfs3_for_6.4' of https://github.com/Paragon-Software-Group/linux-ntfs3: (30 commits)
fs/ntfs3: Fix root inode checking
fs/ntfs3: Print details about mount fails
fs/ntfs3: Add missed "nocase" in ntfs_show_options
fs/ntfs3: Code formatting and refactoring
fs/ntfs3: Changed ntfs_get_acl() to use dentry
fs/ntfs3: Remove field sbi->used.bitmap.set_tail
fs/ntfs3: Undo critial modificatins to keep directory consistency
fs/ntfs3: Undo endian changes
fs/ntfs3: Optimization in ntfs_set_state()
fs/ntfs3: Fix ntfs_create_inode()
fs/ntfs3: Remove noacsrules
fs/ntfs3: Use bh_read to simplify code
fs/ntfs3: Fix a possible null-pointer dereference in ni_clear()
fs/ntfs3: Refactoring of various minor issues
fs/ntfs3: Restore overflow checking for attr size in mi_enum_attr
fs/ntfs3: Check for extremely large size of $AttrDef
fs/ntfs3: Improved checking of attribute's name length
fs/ntfs3: Add null pointer checks
fs/ntfs3: fix spelling mistake "attibute" -> "attribute"
fs/ntfs3: Add length check in indx_get_root
...
o Added detailed design documentation for the upcoming online repair feature
o major update to online scrub to complete the reverse mapping cross-referencing
infrastructure enabling us to fully validate allocated metadata against owner
records. This is the last piece of scrub infrastructure needed before we can
start merging online repair functionality.
o Fixes for the ascii-ci hashing issues
o deprecation of the ascii-ci functionality
o on-disk format verification bug fixes
o various random bug fixes for syzbot and other bug reports
Signed-off-by: Dave Chinner <david@fromorbit.com>
-----BEGIN PGP SIGNATURE-----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=lBJy
-----END PGP SIGNATURE-----
Merge tag 'xfs-6.4-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs updates from Dave Chinner:
"This consists mainly of online scrub functionality and the design
documentation for the upcoming online repair functionality built on
top of the scrub code:
- Added detailed design documentation for the upcoming online repair
feature
- major update to online scrub to complete the reverse mapping
cross-referencing infrastructure enabling us to fully validate
allocated metadata against owner records. This is the last piece of
scrub infrastructure needed before we can start merging online
repair functionality.
- Fixes for the ascii-ci hashing issues
- deprecation of the ascii-ci functionality
- on-disk format verification bug fixes
- various random bug fixes for syzbot and other bug reports"
* tag 'xfs-6.4-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (107 commits)
xfs: fix livelock in delayed allocation at ENOSPC
xfs: Extend table marker on deprecated mount options table
xfs: fix duplicate includes
xfs: fix BUG_ON in xfs_getbmap()
xfs: verify buffer contents when we skip log replay
xfs: _{attr,data}_map_shared should take ILOCK_EXCL until iread_extents is completely done
xfs: remove WARN when dquot cache insertion fails
xfs: don't consider future format versions valid
xfs: deprecate the ascii-ci feature
xfs: test the ascii case-insensitive hash
xfs: stabilize the dirent name transformation function used for ascii-ci dir hash computation
xfs: cross-reference rmap records with refcount btrees
xfs: cross-reference rmap records with inode btrees
xfs: cross-reference rmap records with free space btrees
xfs: cross-reference rmap records with ag btrees
xfs: introduce bitmap type for AG blocks
xfs: convert xbitmap to interval tree
xfs: drop the _safe behavior from the xbitmap foreach macro
xfs: don't load local xattr values during scrub
xfs: remove the for_each_xbitmap_ helpers
...
* Remove an unused symbol.
* Add tracepoints for the directio code.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCZEKzuQAKCRBKO3ySh0YR
pothAQD9sBm7//+vYXxQXPlmX09Jvxixnlwyth+PvUI2Al3mrgEA0h1ZSRhxBbxx
QiIFXCQYckb9GTIcRd67lCp1j/Ie/g0=
=vGbm
-----END PGP SIGNATURE-----
Merge tag 'iomap-6.4-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull iomap updates from Darrick Wong:
"The only changes for this cycle are the addition of tracepoints to the
iomap directio code so that Ritesh (who is working on porting ext2 to
iomap) can observe the io flows more easily.
Summary:
- Remove an unused symbol
- Add tracepoints for the directio code"
* tag 'iomap-6.4-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
iomap: Add DIO tracepoints
iomap: Remove IOMAP_DIO_NOSYNC unused dio flag
fs.h: Add TRACE_IOCB_STRINGS for use in trace points
- fix a PageHighMem check in dma-coherent initialization (Doug Berger)
- clean up the coherency defaul initialiation (Jiaxun Yang)
- add cacheline to user/kernel dma-debug space dump messages
(Desnes Nunes, Geert Uytterhoeve)
- swiotlb statistics improvements (Michael Kelley)
- misc cleanups (Petr Tesarik)
-----BEGIN PGP SIGNATURE-----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=vAit
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-6.4-2023-04-28' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- fix a PageHighMem check in dma-coherent initialization (Doug Berger)
- clean up the coherency defaul initialiation (Jiaxun Yang)
- add cacheline to user/kernel dma-debug space dump messages (Desnes
Nunes, Geert Uytterhoeve)
- swiotlb statistics improvements (Michael Kelley)
- misc cleanups (Petr Tesarik)
* tag 'dma-mapping-6.4-2023-04-28' of git://git.infradead.org/users/hch/dma-mapping:
swiotlb: Omit total_used and used_hiwater if !CONFIG_DEBUG_FS
swiotlb: track and report io_tlb_used high water marks in debugfs
swiotlb: fix debugfs reporting of reserved memory pools
swiotlb: relocate PageHighMem test away from rmem_swiotlb_setup
of: address: always use dma_default_coherent for default coherency
dma-mapping: provide CONFIG_ARCH_DMA_DEFAULT_COHERENT
dma-mapping: provide a fallback dma_default_coherent
dma-debug: Use %pa to format phys_addr_t
dma-debug: add cacheline to user/kernel space dump messages
dma-debug: small dma_debug_entry's comment and variable name updates
dma-direct: cleanup parameters to dma_direct_optimal_gfp_mask
- A trivial documentation fix in the timekeeping core
- A really boring set of small fixes, enhancements and cleanups in the
drivers code. No new clocksource/clockevent drivers for a change.
-----BEGIN PGP SIGNATURE-----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=LWO6
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2023-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull more timer updates from Thomas Gleixner:
"Timekeeping and clocksource/event driver updates the second batch:
- A trivial documentation fix in the timekeeping core
- A really boring set of small fixes, enhancements and cleanups in
the drivers code. No new clocksource/clockevent drivers for a
change"
* tag 'timers-core-2023-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timekeeping: Fix references to nonexistent ktime_get_fast_ns()
dt-bindings: timer: rockchip: Add rk3588 compatible
dt-bindings: timer: rockchip: Drop superfluous rk3288 compatible
clocksource/drivers/ti: Use of_property_read_bool() for boolean properties
clocksource/drivers/timer-ti-dm: Fix finding alwon timer
clocksource/drivers/davinci: Fix memory leak in davinci_timer_register when init fails
clocksource/drivers/stm32-lp: Drop of_match_ptr for ID table
clocksource/drivers/timer-ti-dm: Convert to platform remove callback returning void
clocksource/drivers/timer-tegra186: Convert to platform remove callback returning void
clocksource/drivers/timer-ti-dm: Improve error message in .remove
clocksource/drivers/timer-stm32-lp: Mark driver as non-removable
clocksource/drivers/sh_mtu2: Mark driver as non-removable
clocksource/drivers/timer-ti-dm: Use of_address_to_resource()
clocksource/drivers/timer-imx-gpt: Remove non-DT function
clocksource/drivers/timer-mediatek: Split out CPUXGPT timers
clocksource/drivers/exynos_mct: Explicitly return 0 for shared timer
-----BEGIN PGP SIGNATURE-----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=Ce8b
-----END PGP SIGNATURE-----
Merge tag 'lsm-pr-20230428' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull lsm fix from Paul Moore:
"A single Documentation/LSM fix to update the LSM hook documentation
references from lsm_hooks.h to security.c"
* tag 'lsm-pr-20230428' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
lsm: move hook comments docs to security/security.c
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQQdXVVFGN5XqKr1Hj7LwZzRsCrn5QUCZEb46hQcem9oYXJAbGlu
dXguaWJtLmNvbQAKCRDLwZzRsCrn5U+lAP9vq7PplZeQv0cGygvp+7vH3UmcANsM
7MyyydPC7KfhNgEA7A4WKAPIdvLW7IuKxiVfkgMDxQpFCGkLRHscgbf7xgw=
=v0fw
-----END PGP SIGNATURE-----
Merge tag 'integrity-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity update from Mimi Zohar:
"Just one one bug fix. Other integrity changes are being upstreamed via
the tpm and lsm trees"
* tag 'integrity-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
IMA: allow/fix UML builds
* cpuset changes including the fix for an incorrect interaction with CPU
hotplug and an optimization.
* Other doc and cosmetic changes.
-----BEGIN PGP SIGNATURE-----
iIQEABYIACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCZErfng4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGVVtAQCDycK4VSgc4nsFPG1vh1Oy1A723ciEUwAbKmV/
F1n7xwEA68FiDvE29LpMJJuYP9HnX0A5zRMyNnb52kN9jmgcEQI=
=ALol
-----END PGP SIGNATURE-----
Merge tag 'cgroup-for-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
- cpuset changes including the fix for an incorrect interaction with
CPU hotplug and an optimization
- Other doc and cosmetic changes
* tag 'cgroup-for-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
docs: cgroup-v1/cpusets: update libcgroup project link
cgroup/cpuset: Minor updates to test_cpuset_prs.sh
cgroup/cpuset: Include offline CPUs when tasks' cpumasks in top_cpuset are updated
cgroup/cpuset: Skip task update if hotplug doesn't affect current cpuset
cpuset: Clean up cpuset_node_allowed
cgroup: bpf: use cgroup_lock()/cgroup_unlock() wrappers
Mostly changes from Petr to improve warning and error reporting. Workqueue
now reports more of the relevant failures with better context which should
help debugging.
-----BEGIN PGP SIGNATURE-----
iIQEABYIACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCZErbOg4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGfipAP9BXrUBI99uZL7XjSEe6rLWa0STODyWh67ikR+0
nUO22QEA+ttt5ecLZyopYB18Le06VBBW7J5cs0Cg83bCBTGb4wE=
=gHbc
-----END PGP SIGNATURE-----
Merge tag 'wq-for-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue updates from Tejun Heo:
"Mostly changes from Petr to improve warning and error reporting.
Workqueue now reports more of the relevant failures with better
context which should help debugging"
* tag 'wq-for-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: Introduce show_freezable_workqueues
workqueue: Print backtraces from CPUs with hung CPU bound workqueues
workqueue: Warn when a rescuer could not be created
workqueue: Interrupted create_worker() is not a repeated event
workqueue: Warn when a new worker could not be created
workqueue: Fix hung time report of worker pools
workqueue: Simplify a pr_warn() call in wq_select_unbound_cpu()
MAINTAINERS: Add workqueue_internal.h to the WORKQUEUE entry
All xchg() and cmpxchg() ops are atomic RMWs, but currently we
instrument these with instrument_atomic_write() rather than
instrument_atomic_read_write(), missing the read aspect.
Similarly, all try_cmpxchg() ops are non-atomic RMWs on *oldp, but we
instrument these accesses with instrument_atomic_write() rather than
instrument_read_write(), missing the read aspect and erroneously marking
these as atomic.
Fix the instrumentation for both points.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20230413160644.490976-1-mark.rutland@arm.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
WANG Xuerui
Tom Rix
Linus Torvalds
Christophe JAILLET
Xiubo Li
Conor Dooley
Randy Dunlap
Andrew Jones
Song Shuai
Palmer Dabbelt
Nathan Chancellor
Sia Jee Heng
Mark Rutland