Commit Graph

7993 Commits

Author SHA1 Message Date
Christophe Leroy
a56ab7c729 powerpc/nohash: Convert set_context() to C
ppc8xx already has set_context() in C.

Other ones have it in assembly. The only thing it does is to
write the context id into SPRN_PID.

Do it in C.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a5d0759064f3831c6b88af49ef5d3b05ba1c4dad.1622712515.git.christophe.leroy@csgroup.eu
2021-06-17 00:09:09 +10:00
Christophe Leroy
25910260ff powerpc/nohash: Refactor update of BDI2000 pointers in switch_mmu_context()
Instead of duplicating the update of BDI2000 pointers in
set_context(), do it directly from switch_mmu_context().

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/4c54997edd3548fa54717915e7c6ebaf60f208c0.1622712515.git.christophe.leroy@csgroup.eu
2021-06-17 00:09:09 +10:00
Christophe Leroy
16132529ce powerpc/32s: Rework Kernel Userspace Access Protection
On book3s/32, KUAP is provided by toggling Ks bit in segment registers.
One segment register addresses 256M of virtual memory.

At the time being, KUAP implements a complex logic to apply the
unlock/lock on the exact number of segments covering the user range
to access, with saving the boundaries of the range of segments in
a member of thread struct.

But most if not all user accesses are within a single segment.

Rework KUAP with a different approach:
- Open only one segment, the one corresponding to the starting
address of the range to be accessed.
- If a second segment is involved, it will generate a page fault. The
segment will then be open by the page fault handler.

The kuap member of thread struct will now contain:
- The start address of the current on going user access, that will be
used to know which segment to lock at the end of the user access.
- ~0 when no user access is open
- ~1 when additionnal segments are opened by a page fault.

Then, at lock time
- When only one segment is open, close it.
- When several segments are open, close all user segments.

Almost 100% of the time, only one segment will be involved.

In interrupts, inline the function that unlock/lock all segments,
because not inlining them implies a lot of register save/restore.

With the patch, writing value 128 in userspace in perf_copy_attr() is
done with 16 instructions:

    3890:	93 82 04 dc 	stw     r28,1244(r2)
    3894:	7d 20 e5 26 	mfsrin  r9,r28
    3898:	55 29 00 80 	rlwinm  r9,r9,0,2,0
    389c:	7d 20 e1 e4 	mtsrin  r9,r28
    38a0:	4c 00 01 2c 	isync

    38a4:	39 20 00 80 	li      r9,128
    38a8:	91 3c 00 00 	stw     r9,0(r28)

    38ac:	81 42 04 dc 	lwz     r10,1244(r2)
    38b0:	39 00 ff ff 	li      r8,-1
    38b4:	91 02 04 dc 	stw     r8,1244(r2)
    38b8:	2c 0a ff fe 	cmpwi   r10,-2
    38bc:	41 82 00 88 	beq     3944 <perf_copy_attr+0x36c>
    38c0:	7d 20 55 26 	mfsrin  r9,r10
    38c4:	65 29 40 00 	oris    r9,r9,16384
    38c8:	7d 20 51 e4 	mtsrin  r9,r10
    38cc:	4c 00 01 2c 	isync
...
    3944:	48 00 00 01 	bl      3944 <perf_copy_attr+0x36c>
			3944: R_PPC_REL24	kuap_lock_all_ool

Before the patch it was 118 instructions. In reality only 42 are
executed in most cases, but GCC is not able to see that a properly
aligned user access cannot involve more than one segment.

    5060:	39 1d 00 04 	addi    r8,r29,4
    5064:	3d 20 b0 00 	lis     r9,-20480
    5068:	7c 08 48 40 	cmplw   r8,r9
    506c:	40 81 00 08 	ble     5074 <perf_copy_attr+0x2cc>
    5070:	3d 00 b0 00 	lis     r8,-20480
    5074:	39 28 ff ff 	addi    r9,r8,-1
    5078:	57 aa 00 06 	rlwinm  r10,r29,0,0,3
    507c:	55 29 27 3e 	rlwinm  r9,r9,4,28,31
    5080:	39 29 00 01 	addi    r9,r9,1
    5084:	7d 29 53 78 	or      r9,r9,r10
    5088:	91 22 04 dc 	stw     r9,1244(r2)
    508c:	7d 20 ed 26 	mfsrin  r9,r29
    5090:	55 29 00 80 	rlwinm  r9,r9,0,2,0
    5094:	7c 08 50 40 	cmplw   r8,r10
    5098:	40 81 00 c0 	ble     5158 <perf_copy_attr+0x3b0>
    509c:	7d 46 50 f8 	not     r6,r10
    50a0:	7c c6 42 14 	add     r6,r6,r8
    50a4:	54 c6 27 be 	rlwinm  r6,r6,4,30,31
    50a8:	7d 20 51 e4 	mtsrin  r9,r10
    50ac:	3c ea 10 00 	addis   r7,r10,4096
    50b0:	39 29 01 11 	addi    r9,r9,273
    50b4:	7f 88 38 40 	cmplw   cr7,r8,r7
    50b8:	55 29 02 06 	rlwinm  r9,r9,0,8,3
    50bc:	40 9d 00 9c 	ble     cr7,5158 <perf_copy_attr+0x3b0>

    50c0:	2f 86 00 00 	cmpwi   cr7,r6,0
    50c4:	41 9e 00 4c 	beq     cr7,5110 <perf_copy_attr+0x368>
    50c8:	2f 86 00 01 	cmpwi   cr7,r6,1
    50cc:	41 9e 00 2c 	beq     cr7,50f8 <perf_copy_attr+0x350>
    50d0:	2f 86 00 02 	cmpwi   cr7,r6,2
    50d4:	41 9e 00 14 	beq     cr7,50e8 <perf_copy_attr+0x340>
    50d8:	7d 20 39 e4 	mtsrin  r9,r7
    50dc:	39 29 01 11 	addi    r9,r9,273
    50e0:	3c e7 10 00 	addis   r7,r7,4096
    50e4:	55 29 02 06 	rlwinm  r9,r9,0,8,3
    50e8:	7d 20 39 e4 	mtsrin  r9,r7
    50ec:	39 29 01 11 	addi    r9,r9,273
    50f0:	3c e7 10 00 	addis   r7,r7,4096
    50f4:	55 29 02 06 	rlwinm  r9,r9,0,8,3
    50f8:	7d 20 39 e4 	mtsrin  r9,r7
    50fc:	3c e7 10 00 	addis   r7,r7,4096
    5100:	39 29 01 11 	addi    r9,r9,273
    5104:	7f 88 38 40 	cmplw   cr7,r8,r7
    5108:	55 29 02 06 	rlwinm  r9,r9,0,8,3
    510c:	40 9d 00 4c 	ble     cr7,5158 <perf_copy_attr+0x3b0>
    5110:	7d 20 39 e4 	mtsrin  r9,r7
    5114:	39 29 01 11 	addi    r9,r9,273
    5118:	3c c7 10 00 	addis   r6,r7,4096
    511c:	55 29 02 06 	rlwinm  r9,r9,0,8,3
    5120:	7d 20 31 e4 	mtsrin  r9,r6
    5124:	39 29 01 11 	addi    r9,r9,273
    5128:	3c c6 10 00 	addis   r6,r6,4096
    512c:	55 29 02 06 	rlwinm  r9,r9,0,8,3
    5130:	7d 20 31 e4 	mtsrin  r9,r6
    5134:	39 29 01 11 	addi    r9,r9,273
    5138:	3c c7 30 00 	addis   r6,r7,12288
    513c:	55 29 02 06 	rlwinm  r9,r9,0,8,3
    5140:	7d 20 31 e4 	mtsrin  r9,r6
    5144:	3c e7 40 00 	addis   r7,r7,16384
    5148:	39 29 01 11 	addi    r9,r9,273
    514c:	7f 88 38 40 	cmplw   cr7,r8,r7
    5150:	55 29 02 06 	rlwinm  r9,r9,0,8,3
    5154:	41 9d ff bc 	bgt     cr7,5110 <perf_copy_attr+0x368>

    5158:	4c 00 01 2c 	isync
    515c:	39 20 00 80 	li      r9,128
    5160:	91 3d 00 00 	stw     r9,0(r29)

    5164:	38 e0 00 00 	li      r7,0
    5168:	90 e2 04 dc 	stw     r7,1244(r2)
    516c:	7d 20 ed 26 	mfsrin  r9,r29
    5170:	65 29 40 00 	oris    r9,r9,16384
    5174:	40 81 00 c0 	ble     5234 <perf_copy_attr+0x48c>
    5178:	7d 47 50 f8 	not     r7,r10
    517c:	7c e7 42 14 	add     r7,r7,r8
    5180:	54 e7 27 be 	rlwinm  r7,r7,4,30,31
    5184:	7d 20 51 e4 	mtsrin  r9,r10
    5188:	3d 4a 10 00 	addis   r10,r10,4096
    518c:	39 29 01 11 	addi    r9,r9,273
    5190:	7c 08 50 40 	cmplw   r8,r10
    5194:	55 29 02 06 	rlwinm  r9,r9,0,8,3
    5198:	40 81 00 9c 	ble     5234 <perf_copy_attr+0x48c>

    519c:	2c 07 00 00 	cmpwi   r7,0
    51a0:	41 82 00 4c 	beq     51ec <perf_copy_attr+0x444>
    51a4:	2c 07 00 01 	cmpwi   r7,1
    51a8:	41 82 00 2c 	beq     51d4 <perf_copy_attr+0x42c>
    51ac:	2c 07 00 02 	cmpwi   r7,2
    51b0:	41 82 00 14 	beq     51c4 <perf_copy_attr+0x41c>
    51b4:	7d 20 51 e4 	mtsrin  r9,r10
    51b8:	39 29 01 11 	addi    r9,r9,273
    51bc:	3d 4a 10 00 	addis   r10,r10,4096
    51c0:	55 29 02 06 	rlwinm  r9,r9,0,8,3
    51c4:	7d 20 51 e4 	mtsrin  r9,r10
    51c8:	39 29 01 11 	addi    r9,r9,273
    51cc:	3d 4a 10 00 	addis   r10,r10,4096
    51d0:	55 29 02 06 	rlwinm  r9,r9,0,8,3
    51d4:	7d 20 51 e4 	mtsrin  r9,r10
    51d8:	3d 4a 10 00 	addis   r10,r10,4096
    51dc:	39 29 01 11 	addi    r9,r9,273
    51e0:	7c 08 50 40 	cmplw   r8,r10
    51e4:	55 29 02 06 	rlwinm  r9,r9,0,8,3
    51e8:	40 81 00 4c 	ble     5234 <perf_copy_attr+0x48c>
    51ec:	7d 20 51 e4 	mtsrin  r9,r10
    51f0:	39 29 01 11 	addi    r9,r9,273
    51f4:	3c ea 10 00 	addis   r7,r10,4096
    51f8:	55 29 02 06 	rlwinm  r9,r9,0,8,3
    51fc:	7d 20 39 e4 	mtsrin  r9,r7
    5200:	39 29 01 11 	addi    r9,r9,273
    5204:	3c e7 10 00 	addis   r7,r7,4096
    5208:	55 29 02 06 	rlwinm  r9,r9,0,8,3
    520c:	7d 20 39 e4 	mtsrin  r9,r7
    5210:	39 29 01 11 	addi    r9,r9,273
    5214:	3c ea 30 00 	addis   r7,r10,12288
    5218:	55 29 02 06 	rlwinm  r9,r9,0,8,3
    521c:	7d 20 39 e4 	mtsrin  r9,r7
    5220:	3d 4a 40 00 	addis   r10,r10,16384
    5224:	39 29 01 11 	addi    r9,r9,273
    5228:	7c 08 50 40 	cmplw   r8,r10
    522c:	55 29 02 06 	rlwinm  r9,r9,0,8,3
    5230:	41 81 ff bc 	bgt     51ec <perf_copy_attr+0x444>

    5234:	4c 00 01 2c 	isync

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Export the ool handlers to fix build errors]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/d9121f96a7c4302946839a0771f5d1daeeb6968c.1622708530.git.christophe.leroy@csgroup.eu
2021-06-17 00:09:08 +10:00
Christophe Leroy
86f46f3432 powerpc/32s: Initialise KUAP and KUEP in C
In order to selectively activate KUAP and KUEP in a following patch,
perform KUAP and KUEP initialisation in C.

Unlike PPC64, PPC32 doesn't have an early_setup_secondary(),
so do it in start_secondary().

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/87be72023448dd4e476744ed279b8c04b8d08a1c.1622708530.git.christophe.leroy@csgroup.eu
2021-06-17 00:09:08 +10:00
Christophe Leroy
863771a28e powerpc/32s: Convert switch_mmu_context() to C
switch_mmu_context() does things that can easily be done in C.

For updating user segments, we have update_user_segments().

As mentionned in commit b5efec00b6 ("powerpc/32s: Move KUEP
locking/unlocking in C"), update_user_segments() has the loop
unrolled which is a significant performance gain.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/05c0875ad8220c03452c3a334946e207c6ca04d6.1622708530.git.christophe.leroy@csgroup.eu
2021-06-17 00:09:08 +10:00
Christophe Leroy
10248dcba1 powerpc/44x: Implement Kernel Userspace Exec Protection (KUEP)
Powerpc 44x has two bits for exec protection in TLBs: one
for user (UX) and one for superviser (SX).

Clear SX on user pages in TLB miss handlers to provide KUEP.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/169310e08152aa1d96c979770291d165ec6896ae.1622616032.git.christophe.leroy@csgroup.eu
2021-06-17 00:09:07 +10:00
Christophe Leroy
0e628ad2d6 powerpc/optprobes: use PPC_RAW_ macros
Use PPC_RAW_ macros to simplify the code.

And use PPC_LO/PPC_HI instead of IMM_L/IMM_H which are for
internal use inside ppc-opcode.h

Those macros are self explanatory, comments can go as well.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/5a167b8ba4d33a5c09cd504f0c862e25ffe85459.1621516826.git.christophe.leroy@csgroup.eu
2021-06-17 00:09:07 +10:00
Christophe Leroy
f38adf86ce powerpc/optprobes: Compact code source a bit.
Now that lines can be up to 100 chars long, minimise the
amount of split lines to increase readability.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/8ebbd977ea8cf8d706d82458f2a21acd44562a99.1621516826.git.christophe.leroy@csgroup.eu
2021-06-17 00:09:07 +10:00
Christophe Leroy
afd3287c88 powerpc/optprobes: Minimise casts
nip is already an unsigned long, no cast needed.

op_callback_addr and emulate_step_addr are kprobe_opcode_t *.
There value is obtained with ppc_kallsyms_lookup_name() which
returns 'unsigned long', and there values are used create_branch()
which expects 'unsigned long'. So change them to 'unsigned long'
to avoid casting them back and forth.

can_optimize() used p->addr several times as 'unsigned long'.
Use a local 'unsigned long' variable and avoid casting multiple times.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/e03192a6d4123242a275e71ce2ba0bb4d90700c1.1621516826.git.christophe.leroy@csgroup.eu
2021-06-17 00:09:06 +10:00
Christophe Leroy
69d4d6e5fd powerpc: Don't use 'struct ppc_inst' to reference instruction location
'struct ppc_inst' is an internal representation of an instruction, but
in-memory instructions are and will remain a table of 'u32' forever.

Replace all 'struct ppc_inst *' used for locating an instruction in
memory by 'u32 *'. This removes a lot of undue casts to 'struct
ppc_inst *'.

It also helps locating ab-use of 'struct ppc_inst' dereference.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Fix ppc_inst_next(), use u32 instead of unsigned int]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/7062722b087228e42cbd896e39bfdf526d6a340a.1621516826.git.christophe.leroy@csgroup.eu
2021-06-17 00:09:00 +10:00
Christophe Leroy
18c85964b1 powerpc: Do not dereference code as 'struct ppc_inst' (uprobe, code-patching, feature-fixups)
'struct ppc_inst' is an internal structure to represent an instruction,
it is not directly the representation of that instruction in text code.
It is not meant to map and dereference code.

Dereferencing code directly through 'struct ppc_inst' has two main issues:
- On powerpc, structs are expected to be 8 bytes aligned while code is
spread every 4 byte.
- Should a non prefixed instruction lie at the end of the page and the
following page not be mapped, it would generate a page fault.

In-memory code must be accessed with ppc_inst_read().

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/c9a1201dd0a66b4a0f91f0fb46d9385cbf030feb.1621516826.git.christophe.leroy@csgroup.eu
2021-06-16 23:35:57 +10:00
Christophe Leroy
f30becb5e9 powerpc: Replace PPC_INST_NOP by PPC_RAW_NOP()
On the road to removing all PPC_INST_xx defines in
asm/ppc-opcodes.h, change PPC_INST_NOP to PPC_RAW_NOP().

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/ad46c195ca1b8572629ef07ba6bfe247585239a6.1621506159.git.christophe.leroy@csgroup.eu
2021-06-16 00:16:49 +10:00
Christophe Leroy
deefd0ae99 powerpc/traps: Start using PPC_RAW_xx() macros
Start using PPC_RAW_xx() macros where relevant.

PPC_INST_SYNC is used to both represent the 'sync' instruction and
the family of synchronisation instructions. Keep it for the later,
maybe we'll change the name in the future to avoid confusion.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/0945c155d6cb113431185fc1296ac127359fe29b.1621506159.git.christophe.leroy@csgroup.eu
2021-06-16 00:16:48 +10:00
Christophe Leroy
5a03e1e972 powerpc/ftrace: Use PPC_RAW_MFLR() and PPC_RAW_NOP()
Use PPC_RAW_MFLR() instead of open coding with PPC_INST_MFLR.

Same for PPC_INST_NOP.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/98fd4d717810b7c4032a1edf62dd6fe638e64329.1621506159.git.christophe.leroy@csgroup.eu
2021-06-16 00:16:48 +10:00
Christophe Leroy
e730459756 powerpc/security: Use PPC_RAW_BLR() and PPC_RAW_NOP()
On the road to remove all use of PPC_INST_xxx, replace
PPC_INST_BLR by PPC_RAW_BLR(). Same for PPC_INST_NOP.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/c04f88d0e53d2122fbbe92226892a01ebc668b6a.1621506159.git.christophe.leroy@csgroup.eu
2021-06-16 00:16:48 +10:00
Christophe Leroy
47b04699d0 powerpc/modules: Use PPC_RAW_xx() macros
To improve readability, use PPC_RAW_xx() macros instead of
open coding. Those macros are self-explanatory so the comments
can go as well.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/99d9ee8849d3992beeadb310a665aae01c3abfb1.1621506159.git.christophe.leroy@csgroup.eu
2021-06-16 00:16:48 +10:00
Christophe Leroy
1c9debbc2e powerpc/signal: Use PPC_RAW_xx() macros
To improve readability, use PPC_RAW_xx() macros instead of
open coding. Those macros are self-explanatory so the comments
can go as well.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/4ca2bfdca2f47a293d05f61eb3c4e487ee170f1f.1621506159.git.christophe.leroy@csgroup.eu
2021-06-16 00:16:47 +10:00
Christophe Leroy
8804d5beef powerpc/lib/code-patching: Use PPC_RAW_() macros
Instead of open coding with PPC_INST_ defines, use
PPC_RAW_() macros. It improves readability.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/8c92f1d9e825ee47c6f88fe43ad42d2a8cc2ab4a.1621506159.git.christophe.leroy@csgroup.eu
2021-06-16 00:16:47 +10:00
Christophe Leroy
359c2ca74d powerpc: Don't handle ALTIVEC/SPE in ASM in _switch(). Do it in C.
_switch() saves and restores ALTIVEC and SPE status.
For altivec this is redundant with what __switch_to() does with
save_sprs() and restore_sprs() and giveup_all() before
calling _switch().

Add support for SPI in save_sprs() and restore_sprs() and
remove things from _switch().

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/8ab21fd93d6e0047aa71e6509e5e312f14b2991b.1620998075.git.christophe.leroy@csgroup.eu
2021-06-16 00:16:47 +10:00
Michael Ellerman
a4785e93aa Merge branch 'fixes' into next
Merge our fixes branch which has a number of important fixes, notably
the fix for initrd corruption, as well as the fixes for scv vs ptrace.
2021-06-16 00:14:55 +10:00
Finn Thain
ddf4a7bcd0 powerpc/tau: Remove superfluous parameter in alloc_workqueue() call
This avoids an (optional) compiler warning:

arch/powerpc/kernel/tau_6xx.c: In function 'TAU_init':
arch/powerpc/kernel/tau_6xx.c:204:30: error: too many arguments for format [-Werror=format-extra-args]
  tau_workq = alloc_workqueue("tau", WQ_UNBOUND, 1, 0);

Fixes: b1c6a0a10b ("powerpc/tau: Convert from timer to workqueue")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a1456e8bbd33ef702e3ff6f14b1bf3919241c62b.1623398307.git.fthain@linux-m68k.org
2021-06-15 23:47:10 +10:00
Andy Shevchenko
4cfdd9201c powerpc/prom_init: Move custom isspace() to its own namespace
If by some reason any of the headers will include ctype.h
we will have a name collision. Avoid this by moving isspace()
to the dedicate namespace.

First appearance of the code is in the commit cf68787b68
("powerpc/prom_init: Evaluate mem kernel parameter for early allocation").

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
[mpe: Reformat prom_isxdigit() now that we allow longer lines]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210510144925.58195-1-andriy.shevchenko@linux.intel.com
2021-06-15 17:12:27 +10:00
Michael Ellerman
e41d6c3f4f powerpc/signal64: Copy siginfo before changing regs->nip
In commit 96d7a4e06f ("powerpc/signal64: Rewrite handle_rt_signal64()
to minimise uaccess switches") the 64-bit signal code was rearranged to
use user_write_access_begin/end().

As part of that change the call to copy_siginfo_to_user() was moved
later in the function, so that it could be done after the
user_write_access_end().

In particular it was moved after we modify regs->nip to point to the
signal trampoline. That means if copy_siginfo_to_user() fails we exit
handle_rt_signal64() with an error but with regs->nip modified, whereas
previously we would not modify regs->nip until the copy succeeded.

Returning an error from signal delivery but with regs->nip updated
leaves the process in a sort of half-delivered state. We do immediately
force a SEGV in signal_setup_done(), called from do_signal(), so the
process should never run in the half-delivered state.

However that SEGV is not delivered until we've gone around to
do_notify_resume() again, so it's possible some tracing could observe
the half-delivered state.

There are other cases where we fail signal delivery with regs partly
updated, eg. the write to newsp and SA_SIGINFO, but the latter at least
is very unlikely to fail as it reads back from the frame we just wrote
to.

Looking at other arches they seem to be more careful about leaving regs
unchanged until the copy operations have succeeded, and in general that
seems like good hygenie.

So although the current behaviour is not cleary buggy, it's also not
clearly correct. So move the call to copy_siginfo_to_user() up prior to
the modification of regs->nip, which is closer to the old behaviour, and
easier to reason about.

Fixes: 96d7a4e06f ("powerpc/signal64: Rewrite handle_rt_signal64() to minimise uaccess switches")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210608134605.2783677-1-mpe@ellerman.id.au
2021-06-14 22:14:54 +10:00
Frederic Barrat
59cc84c802 Revert "powerpc/kernel/iommu: Align size for IOMMU_PAGE_SIZE() to save TCEs"
This reverts commit 3c0468d445.

That commit was breaking alignment guarantees for the DMA address when
allocating coherent mappings, as described in
Documentation/core-api/dma-api-howto.rst

It was also noticed by Mellanox' driver:
[ 1515.763621] mlx5_core c002:01:00.0: mlx5_frag_buf_alloc_node:146:(pid 13402): unexpected map alignment: 0x0800000000c61000, page_shift=16
[ 1515.763635] mlx5_core c002:01:00.0: mlx5_cqwq_create:181:(pid
13402): mlx5_frag_buf_alloc_node() failed, -12

Fixes: 3c0468d445 ("powerpc/kernel/iommu: Align size for  IOMMU_PAGE_SIZE() to save TCEs")
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210526144540.117795-1-fbarrat@linux.ibm.com
2021-06-01 11:17:08 +10:00
Nicholas Piggin
5362a4b6ee powerpc: Fix reverse map real-mode address lookup with huge vmalloc
real_vmalloc_addr() does not currently work for huge vmalloc, which is
what the reverse map can be allocated with for radix host, hash guest.

Extract the hugepage aware equivalent from eeh code into a helper, and
convert existing sites including this one to use it.

Fixes: 8abddd968a ("powerpc/64s/radix: Enable huge vmalloc mappings")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210526120005.3432222-1-npiggin@gmail.com
2021-05-28 22:54:27 +10:00
Naveen N. Rao
82123a3d1d powerpc/kprobes: Fix validation of prefixed instructions across page boundary
When checking if the probed instruction is the suffix of a prefixed
instruction, we access the instruction at the previous word. If the
probed instruction is the very first word of a module, we can end up
trying to access an invalid page.

Fix this by skipping the check for all instructions at the beginning of
a page. Prefixed instructions cannot cross a 64-byte boundary and as
such, we don't expect to encounter a suffix as the very first word in a
page for kernel text. Even if there are prefixed instructions crossing
a page boundary (from a module, for instance), the instruction will be
illegal, so preventing probing on the suffix of such prefix instructions
isn't worthwhile.

Fixes: b4657f7650 ("powerpc/kprobes: Don't allow breakpoints on suffixes")
Cc: stable@vger.kernel.org # v5.8+
Reported-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/0df9a032a05576a2fa8e97d1b769af2ff0eafbd6.1621416666.git.naveen.n.rao@linux.vnet.ibm.com
2021-05-28 21:52:42 +10:00
Christophe Leroy
b73c8cccd7 powerpc/kprobes: Replace ppc_optinsn by common optinsn
Commit 51c9c08439 ("powerpc/kprobes: Implement Optprobes")
implemented a powerpc specific version of optinsn in order
to workaround the 32Mb limitation for direct branches.

Instead of implementing a dedicated powerpc version, use the
common optinsn and override the allocation and freeing functions.

This also indirectly remove the CLANG warning about
is_kprobe_ppc_optinsn_slot() not being use, and the powerpc will
now benefit from commit 5b485629ba ("kprobes, extable: Identify
kprobes trampolines as kernel text area")

Suggested-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/ec5e85f9f9abcfecc959a03495f4a7858eb4d203.1620896780.git.christophe.leroy@csgroup.eu
2021-05-23 20:51:35 +10:00
Alexey Kardashevskiy
e2f5efd0f0 powerpc: Fix early setup to make early_ioremap() work
The immediate problem is that after commit
0bd3f9e953 ("powerpc/legacy_serial: Use early_ioremap()") the kernel
silently reboots on some systems.

The reason is that early_ioremap() returns broken addresses as it uses
slot_virt[] array which initialized with offsets from FIXADDR_TOP ==
IOREMAP_END+FIXADDR_SIZE == KERN_IO_END - FIXADDR_SIZ + FIXADDR_SIZE ==
__kernel_io_end which is 0 when early_ioremap_setup() is called.
__kernel_io_end is initialized little bit later in early_init_mmu().

This fixes the initialization by swapping early_ioremap_setup() and
early_init_mmu().

Fixes: 265c3491c4 ("powerpc: Add support for GENERIC_EARLY_IOREMAP")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Drop unrelated cleanup & cleanup change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210520032919.358935-1-aik@ozlabs.ru
2021-05-20 16:43:26 +10:00
Christophe Leroy
70d6ebf82b powerpc/603: Avoid a pile of NOPs when not using SW LRU in TLB exceptions
The SW LRU is in an MMU feature section. When not used, that's a
dozen of NOPs to fetch for nothing.

Define an ALT section that does the few remaining operations.

That also avoids a double read on SRR1 in the SW LRU case.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/603725297466959419628ef7964aaf3417fb647d.1620363691.git.christophe.leroy@csgroup.eu
2021-05-17 15:27:16 +10:00
Christophe Leroy
13c7dad951 powerpc/paca: Remove mm_ctx_id and mm_ctx_slb_addr_limit
mm_ctx_id and mm_ctx_slb_addr_limit are not used anymore.

Remove them.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/6e1813953da38c452c131fe3e2a2761a0fddb975.1620223303.git.christophe.leroy@csgroup.eu
2021-05-17 15:27:15 +10:00
Christophe Leroy
1a3c6ceed2 powerpc/asm-offset: Remove unused items
Following PACA related items are not used anymore by ASM code:
PACA_SIZE, PACACONTEXTID, PACALOWSLICESPSIZE, PACAHIGHSLICEPSIZE,
PACA_SLB_ADDR_LIMIT, MMUPSIZEDEFSIZE, PACASLBCACHE, PACASLBCACHEPTR,
PACASTABRR, PACAVMALLOCSLLP, MMUPSIZESLLP, PACACONTEXTSLLP,
PACALPPACAPTR, LPPACA_DTLIDX and PACA_DTL_RIDX.

Following items are also not used anymore:
SIGSEGV, NMI_MASK, THREAD_DBCR0, KUAP, TI_FLAGS, TI_PREEMPT,
DCACHEL1BLOCKSPERPAGE, ICACHEL1BLOCKSIZE, ICACHEL1LOGBLOCKSIZE,
ICACHEL1BLOCKSPERPAGE, STACK_REGS_KUAP, KVM_NEED_FLUSH, KVM_FWNMI,
VCPU_DEC, VCPU_SPMC, HSTATE_XICS_PHYS, HSTATE_SAVED_XIRR and
PPC_DBELL_MSGTYPE.

Remove all of them.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1c80981548dc0c4f145109cdd473022c1aad8d2b.1620223302.git.christophe.leroy@csgroup.eu
2021-05-17 15:27:15 +10:00
Christophe Leroy
3a5988b884 powerpc/32s: Remove m8260_gorom()
Last user of m8260_gorom() was removed by
Commit 917f0af9e5 ("powerpc: Remove arch/ppc and include/asm-ppc")
removed last user of m8260_gorom().

In fact m8260_gorom() was ported to arch/powerpc/ but the
platform using it died with arch/ppc/

Remove it.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/13f7532f21df3196e8c78b4f82a9c8d5487aca35.1620292185.git.christophe.leroy@csgroup.eu
2021-05-17 15:27:15 +10:00
Nicholas Piggin
c6ac667b07 powerpc/64e/interrupt: Fix nvgprs being clobbered
Some interrupt handlers have an "extra" that saves 1 or 2
registers (r14, r15) in the paca save area and makes them available to
use by the handler.

The change to always save nvgprs in exception handlers lead to some
interrupt handlers saving those scratch r14 / r15 registers into the
interrupt frame's GPR saves, which get restored on interrupt exit.

Fix this by always reloading those scratch registers from paca before
the EXCEPTION_COMMON that saves nvgprs.

Fixes: 4228b2c3d2 ("powerpc/64e/interrupt: always save nvgprs on interrupt")
Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210514044008.1955783-1-npiggin@gmail.com
2021-05-14 17:28:54 +10:00
Christophe Leroy
63970f3c37 powerpc/legacy_serial: Fix UBSAN: array-index-out-of-bounds
UBSAN complains when a pointer is calculated with invalid
'legacy_serial_console' index, allthough the index is verified
before dereferencing the pointer.

Fix it by checking 'legacy_serial_console' validity before
calculating pointers.

Fixes: 0bd3f9e953 ("powerpc/legacy_serial: Use early_ioremap()")
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210511010712.750096-1-mpe@ellerman.id.au
2021-05-12 11:07:39 +10:00
Christophe Leroy
bc581dbab2 powerpc/signal: Fix possible build failure with unsafe_copy_fpr_{to/from}_user
When neither CONFIG_VSX nor CONFIG_PPC_FPU_REGS are selected,
unsafe_copy_fpr_to_user() and unsafe_copy_fpr_from_user() are
doing nothing.

Then, unless the 'label' operand is used elsewhere, GCC complains
about it being defined but not used.

To fix that, add an impossible 'goto label'.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/cadc0a328bc8e6c5bf133193e7547d5c10ae7895.1620465920.git.christophe.leroy@csgroup.eu
2021-05-12 11:07:39 +10:00
Christophe Leroy
5d510ed78b powerpc/syscall: Calling kuap_save_and_lock() is wrong
kuap_save_and_lock() is only for interrupts inside kernel.

system call are only from user, calling kuap_save_and_lock()
is wrong.

Fixes: c16728835e ("powerpc/32: Manage KUAP in C")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/332773775cf24a422105dee2d383fb8f04589045.1620302182.git.christophe.leroy@csgroup.eu
2021-05-12 11:07:38 +10:00
Christophe Leroy
a78339698a powerpc/interrupts: Fix kuep_unlock() call
Same as kuap_user_restore(), kuep_unlock() has to be called when
really returning to user, that is in interrupt_exit_user_prepare(),
not in interrupt_exit_prepare().

Fixes: b5efec00b6 ("powerpc/32s: Move KUEP locking/unlocking in C")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b831e54a2579db24fbef836ed415588ce2b3e825.1620312573.git.christophe.leroy@csgroup.eu
2021-05-12 11:07:37 +10:00
Nicholas Piggin
8abddd968a powerpc/64s/radix: Enable huge vmalloc mappings
This reduces TLB misses by nearly 30x on a `git diff` workload on a
2-node POWER9 (59,800 -> 2,100) and reduces CPU cycles by 0.54%, due
to vfs hashes being allocated with 2MB pages.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210503091755.613393-1-npiggin@gmail.com
2021-05-04 11:06:45 +10:00
Linus Torvalds
17ae69aba8 Add Landlock, a new LSM from Mickaël Salaün <mic@linux.microsoft.com>
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEgycj0O+d1G2aycA8rZhLv9lQBTwFAmCInP4ACgkQrZhLv9lQ
 BTza0g//dTeb9woC9H7qlEhK4l9yk62lTss60Q8X7m7ZSNfdL4tiEbi64SgK+iOW
 OOegbrOEb8Kzh4KJJYmVlVZ5YUWyH4szgmee1wnylBdsWiWaPLPF3Cflz77apy6T
 TiiBsJd7rRE29FKheaMt34B41BMh8QHESN+DzjzJWsFoi/uNxjgSs2W16XuSupKu
 bpRmB1pYNXMlrkzz7taL05jndZYE5arVriqlxgAsuLOFOp/ER7zecrjImdCM/4kL
 W6ej0R1fz2Geh6CsLBJVE+bKWSQ82q5a4xZEkSYuQHXgZV5eywE5UKu8ssQcRgQA
 VmGUY5k73rfY9Ofupf2gCaf/JSJNXKO/8Xjg0zAdklKtmgFjtna5Tyg9I90j7zn+
 5swSpKuRpilN8MQH+6GWAnfqQlNoviTOpFeq3LwBtNVVOh08cOg6lko/bmebBC+R
 TeQPACKS0Q0gCDPm9RYoU1pMUuYgfOwVfVRZK1prgi2Co7ZBUMOvYbNoKYoPIydr
 ENBYljlU1OYwbzgR2nE+24fvhU8xdNOVG1xXYPAEHShu+p7dLIWRLhl8UCtRQpSR
 1ofeVaJjgjrp29O+1OIQjB2kwCaRdfv/Gq1mztE/VlMU/r++E62OEzcH0aS+mnrg
 yzfyUdI8IFv1q6FGT9yNSifWUWxQPmOKuC8kXsKYfqfJsFwKmHM=
 =uCN4
 -----END PGP SIGNATURE-----

Merge tag 'landlock_v34' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security

Pull Landlock LSM from James Morris:
 "Add Landlock, a new LSM from Mickaël Salaün.

  Briefly, Landlock provides for unprivileged application sandboxing.

  From Mickaël's cover letter:
    "The goal of Landlock is to enable to restrict ambient rights (e.g.
     global filesystem access) for a set of processes. Because Landlock
     is a stackable LSM [1], it makes possible to create safe security
     sandboxes as new security layers in addition to the existing
     system-wide access-controls. This kind of sandbox is expected to
     help mitigate the security impact of bugs or unexpected/malicious
     behaviors in user-space applications. Landlock empowers any
     process, including unprivileged ones, to securely restrict
     themselves.

     Landlock is inspired by seccomp-bpf but instead of filtering
     syscalls and their raw arguments, a Landlock rule can restrict the
     use of kernel objects like file hierarchies, according to the
     kernel semantic. Landlock also takes inspiration from other OS
     sandbox mechanisms: XNU Sandbox, FreeBSD Capsicum or OpenBSD
     Pledge/Unveil.

     In this current form, Landlock misses some access-control features.
     This enables to minimize this patch series and ease review. This
     series still addresses multiple use cases, especially with the
     combined use of seccomp-bpf: applications with built-in sandboxing,
     init systems, security sandbox tools and security-oriented APIs [2]"

  The cover letter and v34 posting is here:

      https://lore.kernel.org/linux-security-module/20210422154123.13086-1-mic@digikod.net/

  See also:

      https://landlock.io/

  This code has had extensive design discussion and review over several
  years"

Link: https://lore.kernel.org/lkml/50db058a-7dde-441b-a7f9-f6837fe8b69f@schaufler-ca.com/ [1]
Link: https://lore.kernel.org/lkml/f646e1c7-33cf-333f-070c-0a40ad0468cd@digikod.net/ [2]

* tag 'landlock_v34' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  landlock: Enable user space to infer supported features
  landlock: Add user and kernel documentation
  samples/landlock: Add a sandbox manager example
  selftests/landlock: Add user space tests
  landlock: Add syscall implementations
  arch: Wire up Landlock syscalls
  fs,security: Add sb_delete hook
  landlock: Support filesystem access-control
  LSM: Infrastructure management of the superblock
  landlock: Add ptrace restrictions
  landlock: Set up the security framework and manage credentials
  landlock: Add ruleset and domain management
  landlock: Add object management
2021-05-01 18:50:44 -07:00
Linus Torvalds
d42f323a7d Merge branch 'akpm' (patches from Andrew)
Merge misc updates from Andrew Morton:
 "A few misc subsystems and some of MM.

  175 patches.

  Subsystems affected by this patch series: ia64, kbuild, scripts, sh,
  ocfs2, kfifo, vfs, kernel/watchdog, and mm (slab-generic, slub,
  kmemleak, debug, pagecache, msync, gup, memremap, memcg, pagemap,
  mremap, dma, sparsemem, vmalloc, documentation, kasan, initialization,
  pagealloc, and memory-failure)"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (175 commits)
  mm/memory-failure: unnecessary amount of unmapping
  mm/mmzone.h: fix existing kernel-doc comments and link them to core-api
  mm: page_alloc: ignore init_on_free=1 for debug_pagealloc=1
  net: page_pool: use alloc_pages_bulk in refill code path
  net: page_pool: refactor dma_map into own function page_pool_dma_map
  SUNRPC: refresh rq_pages using a bulk page allocator
  SUNRPC: set rq_page_end differently
  mm/page_alloc: inline __rmqueue_pcplist
  mm/page_alloc: optimize code layout for __alloc_pages_bulk
  mm/page_alloc: add an array-based interface to the bulk page allocator
  mm/page_alloc: add a bulk page allocator
  mm/page_alloc: rename alloced to allocated
  mm/page_alloc: duplicate include linux/vmalloc.h
  mm, page_alloc: avoid page_to_pfn() in move_freepages()
  mm/Kconfig: remove default DISCONTIGMEM_MANUAL
  mm: page_alloc: dump migrate-failed pages
  mm/mempolicy: fix mpol_misplaced kernel-doc
  mm/mempolicy: rewrite alloc_pages_vma documentation
  mm/mempolicy: rewrite alloc_pages documentation
  mm/mempolicy: rename alloc_pages_current to alloc_pages
  ...
2021-04-30 14:38:01 -07:00
Linus Torvalds
c70a4be130 powerpc updates for 5.13
- Enable KFENCE for 32-bit.
 
  - Implement EBPF for 32-bit.
 
  - Convert 32-bit to do interrupt entry/exit in C.
 
  - Convert 64-bit BookE to do interrupt entry/exit in C.
 
  - Changes to our signal handling code to use user_access_begin/end() more extensively.
 
  - Add support for time namespaces (CONFIG_TIME_NS)
 
  - A series of fixes that allow us to reenable STRICT_KERNEL_RWX.
 
  - Other smaller features, fixes & cleanups.
 
 Thanks to: Alexey Kardashevskiy, Andreas Schwab, Andrew Donnellan, Aneesh Kumar K.V,
   Athira Rajeev, Bhaskar Chowdhury, Bixuan Cui, Cédric Le Goater, Chen Huang, Chris
   Packham, Christophe Leroy, Christopher M. Riedl, Colin Ian King, Dan Carpenter, Daniel
   Axtens, Daniel Henrique Barboza, David Gibson, Davidlohr Bueso, Denis Efremov,
   dingsenjie, Dmitry Safonov, Dominic DeMarco, Fabiano Rosas, Ganesh Goudar, Geert
   Uytterhoeven, Geetika Moolchandani, Greg Kurz, Guenter Roeck, Haren Myneni, He Ying,
   Jiapeng Chong, Jordan Niethe, Laurent Dufour, Lee Jones, Leonardo Bras, Li Huafei,
   Madhavan Srinivasan, Mahesh Salgaonkar, Masahiro Yamada, Nathan Chancellor, Nathan
   Lynch, Nicholas Piggin, Oliver O'Halloran, Paul Menzel, Pu Lehui, Randy Dunlap, Ravi
   Bangoria, Rosen Penev, Russell Currey, Santosh Sivaraj, Sebastian Andrzej Siewior,
   Segher Boessenkool, Shivaprasad G Bhat, Srikar Dronamraju, Stephen Rothwell, Thadeu Lima
   de Souza Cascardo, Thomas Gleixner, Tony Ambardar, Tyrel Datwyler, Vaibhav Jain,
   Vincenzo Frascino, Xiongwei Song, Yang Li, Yu Kuai, Zhang Yunkai.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAmCLV1kTHG1wZUBlbGxl
 cm1hbi5pZC5hdQAKCRBR6+o8yOGlgLUyD/4jrTolG4sVec211hYO+0VuJzoqN4Cf
 j2CA2Ju39butnSMiq4LJUPRB7QRZY1OofkoNFpZeDQspjfZXPz2ulpYAz+SxHWE2
 ReHPmWH1rOABlUPXFboePF4OLwmAs9eR5mN2z9HpKXbT3k78HaToLqiONyB4fVCr
 Q5TkJeRn/Y7ZJLdyPLTpczHHleQ8KoM6kT7ncXnTm6p97JOBJSrGaJ5N/8X5a4+e
 6jtgB7Pvw8jNDShSr8BDLBgBZZcmoTiuG8KfgwRZ+m+mKB1yI2X8S/a54w/lDi9g
 UcSv3jQcFLJuW+T/pYe4R330uWDYa0cwjJOtMmsJ98S4EYOevoe9fZuL97qNshme
 xtBr4q1i03G1icYOJJ8dXtvabG2rUzj8t1SCDpwYfrynzTWVRikiQYTXUBhRSFoK
 nsoklvKd2IZa485XYJ2ljSyClMy8S4yJJ9RuzZ94DTXDSJUesKuyRWGnso4mhkcl
 wvl4wwMTJvnCMKVo6dsJyV24QWfd6dABxzm04uPA94CKhG33UwK8252jXVeaohSb
 WSO7qWBONgDXQLJ0mXRcEYa9NHvFS4Jnp6APbxnHr1gS+K+PNkD4gPBf34FoyN0E
 9s27kvEYk5vr8APUclETF6+FkbGUD5bFbusjt3hYloFpAoHQ/k5pFVDsOZNPA8sW
 fDIRp05KunDojw==
 =dfKL
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:

 - Enable KFENCE for 32-bit.

 - Implement EBPF for 32-bit.

 - Convert 32-bit to do interrupt entry/exit in C.

 - Convert 64-bit BookE to do interrupt entry/exit in C.

 - Changes to our signal handling code to use user_access_begin/end()
   more extensively.

 - Add support for time namespaces (CONFIG_TIME_NS)

 - A series of fixes that allow us to reenable STRICT_KERNEL_RWX.

 - Other smaller features, fixes & cleanups.

Thanks to Alexey Kardashevskiy, Andreas Schwab, Andrew Donnellan, Aneesh
Kumar K.V, Athira Rajeev, Bhaskar Chowdhury, Bixuan Cui, Cédric Le
Goater, Chen Huang, Chris Packham, Christophe Leroy, Christopher M.
Riedl, Colin Ian King, Dan Carpenter, Daniel Axtens, Daniel Henrique
Barboza, David Gibson, Davidlohr Bueso, Denis Efremov, dingsenjie,
Dmitry Safonov, Dominic DeMarco, Fabiano Rosas, Ganesh Goudar, Geert
Uytterhoeven, Geetika Moolchandani, Greg Kurz, Guenter Roeck, Haren
Myneni, He Ying, Jiapeng Chong, Jordan Niethe, Laurent Dufour, Lee
Jones, Leonardo Bras, Li Huafei, Madhavan Srinivasan, Mahesh Salgaonkar,
Masahiro Yamada, Nathan Chancellor, Nathan Lynch, Nicholas Piggin,
Oliver O'Halloran, Paul Menzel, Pu Lehui, Randy Dunlap, Ravi Bangoria,
Rosen Penev, Russell Currey, Santosh Sivaraj, Sebastian Andrzej Siewior,
Segher Boessenkool, Shivaprasad G Bhat, Srikar Dronamraju, Stephen
Rothwell, Thadeu Lima de Souza Cascardo, Thomas Gleixner, Tony Ambardar,
Tyrel Datwyler, Vaibhav Jain, Vincenzo Frascino, Xiongwei Song, Yang Li,
Yu Kuai, and Zhang Yunkai.

* tag 'powerpc-5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (302 commits)
  powerpc/signal32: Fix erroneous SIGSEGV on RT signal return
  powerpc: Avoid clang uninitialized warning in __get_user_size_allowed
  powerpc/papr_scm: Mark nvdimm as unarmed if needed during probe
  powerpc/kvm: Fix build error when PPC_MEM_KEYS/PPC_PSERIES=n
  powerpc/kasan: Fix shadow start address with modules
  powerpc/kernel/iommu: Use largepool as a last resort when !largealloc
  powerpc/kernel/iommu: Align size for IOMMU_PAGE_SIZE() to save TCEs
  powerpc/44x: fix spelling mistake in Kconfig "varients" -> "variants"
  powerpc/iommu: Annotate nested lock for lockdep
  powerpc/iommu: Do not immediately panic when failed IOMMU table allocation
  powerpc/iommu: Allocate it_map by vmalloc
  selftests/powerpc: remove unneeded semicolon
  powerpc/64s: remove unneeded semicolon
  powerpc/eeh: remove unneeded semicolon
  powerpc/selftests: Add selftest to test concurrent perf/ptrace events
  powerpc/selftests/perf-hwbreak: Add testcases for 2nd DAWR
  powerpc/selftests/perf-hwbreak: Coalesce event creation code
  powerpc/selftests/ptrace-hwbreak: Add testcases for 2nd DAWR
  powerpc/configs: Add IBMVNIC to some 64-bit configs
  selftests/powerpc: Add uaccess flush test
  ...
2021-04-30 12:22:28 -07:00
Nicholas Piggin
4ad0ae8c64 mm/vmalloc: remove unmap_kernel_range
This is a shim around vunmap_range, get rid of it.

Move the main API comment from the _noflush variant to the normal
variant, and make _noflush internal to mm/.

[npiggin@gmail.com: fix nommu builds and a comment bug per sfr]
  Link: https://lkml.kernel.org/r/1617292598.m6g0knx24s.astroid@bobo.none
[akpm@linux-foundation.org: move vunmap_range_noflush() stub inside !CONFIG_MMU, not !CONFIG_NUMA]
[npiggin@gmail.com: fix nommu builds]
  Link: https://lkml.kernel.org/r/1617292497.o1uhq5ipxp.astroid@bobo.none

Link: https://lkml.kernel.org/r/20210322021806.892164-5-npiggin@gmail.com
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Cédric Le Goater <clg@kaod.org>
Cc: Uladzislau Rezki <urezki@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-04-30 11:20:40 -07:00
Linus Torvalds
767fcbc80f \n
-----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAmCJU1UACgkQnJ2qBz9k
 QNk62AgAgp05OIXU/AgObb7DvSyI3ycwCV8PeWBpwD8yoDAh5x0tmT7vnJu974p6
 yHdnF7rr69ZzvbNCHLJ5kRykRlUao9W7cO5fdOW1uTpL7Ic60QuJMks/NfgVTHp1
 2zIQmBDerfn1/LTK8r2pPGcvtcjRcr7Ep4beN0Duw57lfVMJhjsNRPnBbXGBcp0r
 QzKk4/8V3DCZvOw+XNC3nto7avjvf+nU9sJmuh83546eqh0atjWivvO5aAlDOe6W
 rhBiLlmP0in5u2n1fYqzI1OQvtgtleyEZT2G0CrbAZn0xjmV/if9wl+3K6TOwDvR
 778xDEX7sZCaO/xkB+WK3hrd15ftKg==
 =0kYE
 -----END PGP SIGNATURE-----

Merge tag 'for_v5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs

Pull quota, ext2, reiserfs updates from Jan Kara:

 - support for path (instead of device) based quotactl syscall
   (quotactl_path(2))

 - ext2 conversion to kmap_local()

 - other minor cleanups & fixes

* tag 'for_v5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  fs/reiserfs/journal.c: delete useless variables
  fs/ext2: Replace kmap() with kmap_local_page()
  ext2: Match up ext2_put_page() with ext2_dotdot() and ext2_find_entry()
  fs/ext2/: fix misspellings using codespell tool
  quota: report warning limits for realtime space quotas
  quota: wire up quotactl_path
  quota: Add mountpath based quota support
2021-04-29 10:51:29 -07:00
Christophe Leroy
5256426247 powerpc/signal32: Fix erroneous SIGSEGV on RT signal return
Return of user_read_access_begin() is tested the wrong way,
leading to a SIGSEGV when the user address is valid and likely
an Oops when the user address is bad.

Fix the test.

Fixes: 887f3ceb51 ("powerpc/signal32: Convert do_setcontext[_tm]() to user access block")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a29aadc54c93bcbf069a83615fa102ca0f59c3ae.1619185912.git.christophe.leroy@csgroup.eu
2021-04-28 23:35:11 +10:00
Linus Torvalds
7f3d08b255 printk changes for 5.13
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEESH4wyp42V4tXvYsjUqAMR0iAlPIFAmCIBMIACgkQUqAMR0iA
 lPIt9w//bbHUN/JsNtLCs/849oExdUn/thVajrD5yELttYZXhdzbXncNdkGX9tlU
 4JmExmUoqKYdN6JhSnrcYvckHj7XXZM7pVh9IdzqRh10MEXIQ+7IUHjQc8034Zs/
 W4/oZmfMtBjszap+cJ9hvdp9qaJkPz/fRLGlrbjc1K4hhxDa1gGmeD35SKswGltm
 q6RzX3uRl5JbBrYsLoqb28MGYRHhjf2+Pvndoj+5Nn9FtwPSot6jAkyqY5Y6iJlS
 W2EsFqOt+Kv7/I93FyQlnXC6Nx7vntmow7knmmGPXDf2BqLb0J8Bxl3fwuzpQoao
 nZzL/p9GQ4ZXF6y8gRV8+RzPIcftBdayOswEDGH0LzlTkbAe/9Sq9Lo7a4Z8jxHW
 ro0P+PSRK5Ksm7jvpVmSTg+Nt+XqDA5zA1lAorX1UjsyeDDNF9ndQ4C+ZNhCKo54
 y+RDgtAArJMIvsHLQ53ReoOct5NnGVNb8G/r3bIAu+Dn6K3nesr6fP1XG8iduseL
 yFlLB7w214BQMr2B/C+8lQvj54wWE4lea2+LNvObxC5b8puYj0fEniUxTYP6bcB5
 QT+LfTToufYz4US7ggJy6hoEfohifGWVvDHbn9tXmyXotSTHH7pHdYypqY+UO+kl
 7BkwzNFCm4qCIKsg8nyJxT2hDOlpcCrQx1dBIjveMqJ0c5+ahXU=
 =ovSn
 -----END PGP SIGNATURE-----

Merge tag 'printk-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux

Pull printk updates from Petr Mladek:

 - Stop synchronizing kernel log buffer readers by logbuf_lock. As a
   result, the access to the buffer is fully lockless now.

   Note that printk() itself still uses locks because it tries to flush
   the messages to the console immediately. Also the per-CPU temporary
   buffers are still there because they prevent infinite recursion and
   serialize backtraces from NMI. All this is going to change in the
   future.

 - kmsg_dump API rework and cleanup as a side effect of the logbuf_lock
   removal.

 - Make bstr_printf() aware that %pf and %pF formats could deference the
   given pointer.

 - Show also page flags by %pGp format.

 - Clarify the documentation for plain pointer printing.

 - Do not show no_hash_pointers warning multiple times.

 - Update Senozhatsky email address.

 - Some clean up.

* tag 'printk-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: (24 commits)
  lib/vsprintf.c: remove leftover 'f' and 'F' cases from bstr_printf()
  printk: clarify the documentation for plain pointer printing
  kernel/printk.c: Fixed mundane typos
  printk: rename vprintk_func to vprintk
  vsprintf: dump full information of page flags in pGp
  mm, slub: don't combine pr_err with INFO
  mm, slub: use pGp to print page flags
  MAINTAINERS: update Senozhatsky email address
  lib/vsprintf: do not show no_hash_pointers message multiple times
  printk: console: remove unnecessary safe buffer usage
  printk: kmsg_dump: remove _nolock() variants
  printk: remove logbuf_lock
  printk: introduce a kmsg_dump iterator
  printk: kmsg_dumper: remove @active field
  printk: add syslog_lock
  printk: use atomic64_t for devkmsg_user.seq
  printk: use seqcount_latch for clear_seq
  printk: introduce CONSOLE_LOG_MAX
  printk: consolidate kmsg_dump_get_buffer/syslog_print_all code
  printk: refactor kmsg_dump_get_buffer()
  ...
2021-04-27 18:09:44 -07:00
Leonardo Bras
fc5590fd56 powerpc/kernel/iommu: Use largepool as a last resort when !largealloc
As of today, doing iommu_range_alloc() only for !largealloc (npages <= 15)
will only be able to use 3/4 of the available pages, given pages on
largepool  not being available for !largealloc.

This could mean some drivers not being able to fully use all the available
pages for the DMA window.

Add pages on largepool as a last resort for !largealloc, making all pages
of the DMA window available.

Signed-off-by: Leonardo Bras <leobras.c@gmail.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210318174414.684630-2-leobras.c@gmail.com
2021-04-23 12:54:58 +10:00
Leonardo Bras
3c0468d445 powerpc/kernel/iommu: Align size for IOMMU_PAGE_SIZE() to save TCEs
Currently both iommu_alloc_coherent() and iommu_free_coherent() align the
desired allocation size to PAGE_SIZE, and gets system pages and IOMMU
mappings (TCEs) for that value.

When IOMMU_PAGE_SIZE < PAGE_SIZE, this behavior may cause unnecessary
TCEs to be created for mapping the whole system page.

Example:
- PAGE_SIZE = 64k, IOMMU_PAGE_SIZE() = 4k
- iommu_alloc_coherent() is called for 128 bytes
- 1 system page (64k) is allocated
- 16 IOMMU pages (16 x 4k) are allocated (16 TCEs used)

It would be enough to use a single TCE for this, so 15 TCEs are
wasted in the process.

Update iommu_*_coherent() to make sure the size alignment happens only
for IOMMU_PAGE_SIZE() before calling iommu_alloc() and iommu_free().

Also, on iommu_range_alloc(), replace ALIGN(n, 1 << tbl->it_page_shift)
with IOMMU_PAGE_ALIGN(n, tbl), which is easier to read and does the
same.

Signed-off-by: Leonardo Bras <leobras.c@gmail.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210318174414.684630-1-leobras.c@gmail.com
2021-04-23 12:54:50 +10:00
Mickaël Salaün
a49f4f81cb arch: Wire up Landlock syscalls
Wire up the following system calls for all architectures:
* landlock_create_ruleset(2)
* landlock_add_rule(2)
* landlock_restrict_self(2)

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: James Morris <jmorris@namei.org>
Cc: Jann Horn <jannh@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Serge E. Hallyn <serge@hallyn.com>
Signed-off-by: Mickaël Salaün <mic@linux.microsoft.com>
Link: https://lore.kernel.org/r/20210422154123.13086-10-mic@digikod.net
Signed-off-by: James Morris <jamorris@linux.microsoft.com>
2021-04-22 12:22:11 -07:00
Alexey Kardashevskiy
cc7130bf11 powerpc/iommu: Annotate nested lock for lockdep
The IOMMU table is divided into pools for concurrent mappings and each
pool has a separate spinlock. When taking the ownership of an IOMMU group
to pass through a device to a VM, we lock these spinlocks which triggers
a false negative warning in lockdep (below).

This fixes it by annotating the large pool's spinlock as a nest lock
which makes lockdep not complaining when locking nested locks if
the nest lock is locked already.

===
WARNING: possible recursive locking detected
5.11.0-le_syzkaller_a+fstn1 #100 Not tainted
--------------------------------------------
qemu-system-ppc/4129 is trying to acquire lock:
c0000000119bddb0 (&(p->lock)/1){....}-{2:2}, at: iommu_take_ownership+0xac/0x1e0

but task is already holding lock:
c0000000119bdd30 (&(p->lock)/1){....}-{2:2}, at: iommu_take_ownership+0xac/0x1e0

other info that might help us debug this:
 Possible unsafe locking scenario:

       CPU0
       ----
  lock(&(p->lock)/1);
  lock(&(p->lock)/1);
===

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210301063653.51003-1-aik@ozlabs.ru
2021-04-23 01:38:04 +10:00
Alexey Kardashevskiy
4be518d838 powerpc/iommu: Do not immediately panic when failed IOMMU table allocation
Most platforms allocate IOMMU table structures (specifically it_map)
at the boot time and when this fails - it is a valid reason for panic().

However the powernv platform allocates it_map after a device is returned
to the host OS after being passed through and this happens long after
the host OS booted. It is quite possible to trigger the it_map allocation
panic() and kill the host even though it is not necessary - the host OS
can still use the DMA bypass mode (requires a tiny fraction of it_map's
memory) and even if that fails, the host OS is runnnable as it was without
the device for which allocating it_map causes the panic.

Instead of immediately crashing in a powernv/ioda2 system, this prints
an error and continues. All other platforms still call panic().

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Leonardo Bras <leobras.c@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210216033307.69863-3-aik@ozlabs.ru
2021-04-23 01:38:04 +10:00