IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Fixes the following W=1 kernel build warning(s):
drivers/net/wireless/rsi/rsi_91x_mgmt.c:1550: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
Cc: Amitkumar Karwar <amitkarwar@gmail.com>
Cc: Siva Rebbagondla <siva8118@gmail.com>
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210517050141.61488-10-shenyang39@huawei.com
Fixes the following W=1 kernel build warning(s):
drivers/net/wireless/realtek/rtlwifi/rtl8192cu/mac.c:124: warning: expecting prototype for writeLLT(). Prototype was for rtl92c_llt_write() instead
drivers/net/wireless/realtek/rtlwifi/rtl8192cu/mac.c:154: warning: expecting prototype for rtl92c_init_LLT_table(). Prototype was for rtl92c_init_llt_table() instead
Cc: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210517050141.61488-9-shenyang39@huawei.com
Fixes the following W=1 kernel build warning(s):
drivers/net/wireless/marvell/libertas_tf/if_usb.c:56: warning: expecting prototype for if_usb_wrike_bulk_callback(). Prototype was for if_usb_write_bulk_callback() instead
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210517050141.61488-8-shenyang39@huawei.com
This got lost during the refactoring across versions. We always use
NLM_F_EXCL when creating some TC object, so reflect what the function
says and set the flag.
Fixes: 715c5ce454a6 ("libbpf: Add low level TC-BPF management API")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210612023502.1283837-3-memxor@gmail.com
Coverity complained about this being unreachable code. It is right
because we already enforce flags to be unset, so a check validating
the flag value is redundant.
Fixes: 715c5ce454a6 ("libbpf: Add low level TC-BPF management API")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210612023502.1283837-2-memxor@gmail.com
If 'brcms_attach()' fails, we must undo the previous 'ieee80211_alloc_hw()'
as already done in the remove function.
Fixes: 5b435de0d786 ("net: wireless: add brcm80211 drivers")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/8fbc171a1a493b38db5a6f0873c6021fca026a6c.1620852921.git.christophe.jaillet@wanadoo.fr
The parameter passed to ai_detach() is guaranteed to never be NULL
because it is checked by the caller. Consequently, the result of
container_of() on it is also never NULL, and a NULL check on it
is unnecessary. Even without that, the NULL check would still be
unnecessary because the subsequent kfree() can handle NULL arguments.
On top of all that, it is misleading to check the result of container_of()
against NULL because the position of the contained element could change,
which would make the check invalid. Remove it.
This change was made automatically with the following Coccinelle script.
@@
type t;
identifier v;
statement s;
@@
<+...
(
t v = container_of(...);
|
v = container_of(...);
)
...
when != v
- if (\( !v \| v == NULL \) ) s
...+>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210511235629.1686038-1-linux@roeck-us.net
A static analyzer identified as a potential bug the copy of
12 bytes from a 6 bytes array to a 6 bytes array. Both
arrays are 6 bytes addresses.
Although not being a real bug, it is not immediately clear
why is done this way: next 6 bytes address, contiguous to
the first one, must also be copied to next contiguous 6 bytes
address of the destination.
Copying each one separately will make both static analyzers
and reviewers happier.
Signed-off-by: Íñigo Huguet <ihuguet@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210511070257.7843-1-ihuguet@redhat.com
Cypress Wi-Fi chipsets include information regarding regulatory
constraints. These are provided to the driver through "Country Local
Matrix" (CLM) blobs. Files present in Linux firmware repository are
on a generic world-wide safe version with conservative power
settings which is designed to comply with regulatory but may not
provide best performance on all boards. Never the less, a better
functionality can be expected with the file present, so add it to the
modinfo of the driver.
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210607103433.21022-1-matthias.bgg@kernel.org
BRCMF_FW_DEFAULT_PATH already defines the brcm folder, delete the second
folder to match with Linux firmware repository layout.
Fixes: 75729e110e68 ("brcmfmac: expose firmware config files through modinfo")
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210602144305.4481-1-matthias.bgg@kernel.org
brcmf_sdiod_remove has been called inside brcmf_sdiod_probe when fails,
so there's no need to call another one. Otherwise, sdiodev->freezer
would be double freed.
Fixes: 7836102a750a ("brcmfmac: reset SDIO bus on a firmware crash")
Signed-off-by: Tong Tiangen <tongtiangen@huawei.com>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210601100128.69561-1-tongtiangen@huawei.com
Fixes the following W=1 kernel build warning(s):
drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c:2040: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:1295: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
Cc: Franky Lin <franky.lin@broadcom.com>
Cc: Hante Meuleman <hante.meuleman@broadcom.com>
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210517050141.61488-5-shenyang39@huawei.com
The rx_lastpkt_rssi field provided by the firmware is suitable for
NL80211_STA_INFO_{SIGNAL,CHAIN_SIGNAL}, while the rssi field is an
average. Fix up the assignments and set the correct STA_INFO bits. This
lets userspace know that the average RSSI is part of the station info.
Fixes: cae355dc90db ("brcmfmac: Add RSSI information to get_station.")
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210506132010.3964484-2-alsi@bang-olufsen.dk
The sinfo->chains field is a bitmask for filled values in chain_signal
and chain_signal_avg, not a count. Treat it as such so that the driver
can properly report per-chain RSSI information.
Before (MIMO mode):
$ iw dev wlan0 station dump
...
signal: -51 [-51] dBm
After (MIMO mode):
$ iw dev wlan0 station dump
...
signal: -53 [-53, -54] dBm
Fixes: cae355dc90db ("brcmfmac: Add RSSI information to get_station.")
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210506132010.3964484-1-alsi@bang-olufsen.dk
Instead of aborting country code setup in firmware, use ISO3166 country
code and 0 rev as fallback, when country_codes mapping table is not
configured. This fallback saves the country_codes table setup for recent
brcmfmac chipsets/firmwares, which just use ISO3166 code and require no
revision number.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210425110200.3050-1-shawn.guo@linaro.org
Use DEVICE_ATTR_ADMIN_RW() helper macro instead of DEVICE_ATTR(), making
it simpler and easier to read.
Because the read and write function names of the sysfs attribute have been
normalized, there is a natural association.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210603082218.11718-2-thunder.leizhen@huawei.com
The return value of ssb_bus_unregister can only be 0 or -1, so this
condition if (err == -EBUSY) will not hold, so delete it.
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Acked-by: Michael Büsch <m@bues.ch>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1621306352-3632-1-git-send-email-tiantao6@hisilicon.com
It doesn't make sense to clobber the const driver-side buffer, if a
write-to-device attempt failed. All other SSB variants (PCI, PCMCIA and SoC)
also don't corrupt the buffer on any failure in block_write.
Therefore, remove this memset from the SDIO variant.
Signed-off-by: Michael Büsch <m@bues.ch>
Cc: stable@vger.kernel.org
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210515210252.318be2ba@wiggum
Fix to return -EINVAL from the error handling case instead of 0, as done
elsewhere in this function.
Fixes: 61e115a56d1a ("[SSB]: add Sonics Silicon Backplane bus support")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Acked-by: Michael Büsch <m@bues.ch>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210515072949.7151-1-thunder.leizhen@huawei.com
Variable 'err' is set to zero but this value is never read as it is
overwritten with a new value later on, hence it is a redundant
assignment and can be removed.
Clean up the following clang-analyzer warning:
drivers/ssb/main.c:1306:3: warning: Value stored to 'err' is never read
[clang-analyzer-deadcode.DeadStores]
drivers/ssb/main.c:1312:3: warning: Value stored to 'err' is never read
[clang-analyzer-deadcode.DeadStores]
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Acked-by: Michael Büsch <m@bues.ch>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1619693230-108804-1-git-send-email-yang.lee@linux.alibaba.com
Shifted the closing */ to the next line
This is done to maintain code uniformity.
Acked-by: Michael Büsch <m@bues.ch>
Signed-off-by: Shubhankar Kuranagatti <shubhankarvk@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210428162907.bn5q3oh3sji6wlh4@kewl-virtual-machine
Shifted the closing */ to the next line
This is done to maintain code uniformity.
Acked-by: Michael Büsch <m@bues.ch>
Signed-off-by: Shubhankar Kuranagatti <shubhankarvk@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210428161836.sdrxzcrfiekloucz@kewl-virtual-machine
The closing */ has been shifted to a new line
This is done to maintain code uniformity.
Acked-by: Michael Büsch <m@bues.ch>
Signed-off-by: Shubhankar Kuranagatti <shubhankarvk@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210428160747.qy23g6zpmheiacpl@kewl-virtual-machine
Whenever users provided affinity for an EQ creation request, map the
EQ to a matching IRQ.
Matching IRQ=IRQ with the same affinity and type (completion/control) of
the EQ created.
This mapping is being done in agressive dedicated IRQ allocation scheme,
which described bellow.
First, we check whether there is a matching IRQ that his min threshold
is not exhausted.
- min_eqs_threshold = 3 for control EQ.
- min_eqs_threshold = 1 for completion EQ.
In case no matching IRQ was found, try to request a new IRQ.
In case we can't request a new IRQ, reuse least-used matching IRQ.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Move mlx5_sf_max_functions() and friends from the privete sf/sf.h
to the public lib/sf.h. This is done in order to have one direction
include paths.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
FW is now supporting more than 256 MSI-X per PF (up to 2K).
Hence, enlarge interrupt field in CREATE_EQ to make use of the new
MSI-X's.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
SFs (Sub Functions) currently use IRQs from the global IRQ table their
parent Physical Function have. In order to better scale, we need to
allocate more IRQs and share them between different SFs.
Driver will maintain 3 separated irq pools:
1. A pool that serve the PF consumer (PF's netdev, rdma stacks), similar
to what the driver had before this patch. i.e, this pool will share irqs
between rdma and netev, and will keep the irq indexes and allocation
order. The last is important for PF netdev rmap (aRFS).
2. A pool of control IRQs for SFs. The size of this pool is the number
of SFs that can be created divided by SFS_PER_IRQ. This pool will serve
the control path EQs of the SFs.
3. A pool of completion data path IRQs for SFs transport queues. The
size of this pool is:
num_irqs_allocated - pf_pool_size - sf_ctrl_pool_size.
This pool will served netdev and rdma stacks. Moreover, rmap is not
supported on SFs.
Sharing methodology of the SFs pools is explained in the next patch.
Important note: rmap is not supported on SFs because rmap mapping cannot
function correctly for IRQs that are shared for different core/netdev RX
rings.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Store newly created IRQs in the xarray DB instead of a static array,
so we will be able to store only IRQs which are being used.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
IRQs are being simplified in order to ease their sharing and any feature
specific object will be moved to upper layer.
Hence we move rmap object into eq_table.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Extend mlx5_irq_request so that IRQs will be requested upon EQ creation,
and not on driver boot.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
In next patches, IRQs will be requested according to demand, instead of
statically on driver boot.
Also, currently, rmap is managed by the IRQ layer. rmap management will
move out from the IRQ layer in future patches.
Therefore, we want to remove the IRQ from the rmap, when IRQ is destroyed,
instead of removing all the IRQs from the rmap when irq_table is destroyed.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The eq.[c|h] files are under major rewrite. so use this opportunity and
update their copyright and license texts.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The users of EQ are running their code on different CPUs and with
various affinity patterns. Move the cpumask setting close to their
actual usage.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Introduce new API that will allow IRQs users to hold a pointer to
mlx5_irq.
In the end of this series, IRQs will be allocated on demand. Hence,
this will allow us to properly manage and use IRQs.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Shared IRQ are consumed by multiple EQ users and in order to properly
initialize and later release such IRQs, we add kref counting of IRQ
structure.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Lag is used to combine two PCI functions of the same HCA into a single
logical unit. This is a core functionality and as such should be managed by
the core driver. Currently this isn't the case. While we store the lag
software structure inside the lower device, its lifetime (creation /
destruction) is dictated by the mlx5e part. Change the ownership model so
lag is tied to the lifetime of the lower level driver instead to the
mlx5e part.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
If MLX5_PRIV_FLAGS_DISABLE_ALL_ADEV is set it means the device is going
down and mlx5_rescan_drivers_locked() shouldn't be called.
With this patch and the previous one in the series, unbinding a PCI
function when its netdev is part of a bond works and leaves the system in a
working state.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
When a net device is removed (can happen if the PCI function is unbound
from the system) it's not enough to destroy the hardware lag. The system
should recreate the original devices that were present before the lag.
As the same flow is done when a net device is removed from the bond
refactor and reuse the code.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
There is not strong reason to have both WWAN and WWAN_CORE symbols,
Let's build the WWAN core framework when WWAN is selected, in the
same way as for other subsystems.
This fixes issue with mhi_net selecting WWAN_CORE without WWAN and
reported by kernel test robot:
Kconfig warnings: (for reference only)
WARNING: unmet direct dependencies detected for WWAN_CORE
Depends on NETDEVICES && WWAN
Selected by
- MHI_NET && NETDEVICES && NET_CORE && MHI_BUS
Fixes: 9a44c1cc6388 ("net: Add a WWAN subsystem")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
After the blamed patch, __skb_flow_dissect() on the DSA master stopped
adjusting for the length of the DSA headers. This is because it was told
to adjust only if the needed_headroom is zero, aka if there is no DSA
header. Of course, the adjustment should be done only if there _is_ a
DSA header.
Modify the comment too so it is clearer.
Fixes: 4e50025129ef ("net: dsa: generalize overhead for taggers that use both headers and trailers")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The struct sja1105_regs tables are not modified during the runtime of
the driver, so they can be made constant. In fact, struct sja1105_info
already holds a const pointer to these.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean says:
====================
Fixes and improvements to TJA1103 PHY driver
This series contains:
- an erratum workaround for the TJA1103 PHY integrated in SJA1110
- an adaptation of the driver so it prints less unnecessary information
when probing on SJA1110
- a PTP RX timestamping bug fix and a clarification patch
Targeting net-next since the PHY support is currently in net-next only.
Changes in v3:
Added one more patch which improves the readability of
nxp_c45_reconstruct_ts.
Changes in v2:
Added a comment to the hardware workaround procedure.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The SJA1110 switch integrates TJA1103 PHYs, but in SJA1110 switch rev B
silicon, there is a bug in that the registers for selecting the 100base-T1
autoneg master/slave roles are not writable.
To enable write access to the master/slave registers, these additional
PHY writes are necessary during initialization.
The issue has been corrected in later SJA1110 silicon versions and is
not present in the standalone PHY variants, but applying the workaround
unconditionally in the driver should not do any harm.
Suggested-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
The reconstruction procedure for partial timestamps reads the current
PTP time and fills in the low 2 bits of the second portion, as well as
the nanoseconds portion, from the actual hardware packet timestamp.
Critically, the reconstruction procedure works because it assumes that
the current PTP time is strictly larger than the hardware timestamp was:
it detects a 2-bit wraparound of the 'seconds' portion by checking whether
the 'seconds' portion of the partial hardware timestamp is larger than
the 'seconds' portion of the current time. That can only happen if the
hardware timestamp was captured by the PHY during the last phase of a
'modulo 4 seconds' interval, and the current PTP time was read by the
driver during the initial phase of the next 'modulo 4 seconds' interval.
The partial RX timestamps are added to priv->rx_queue in
nxp_c45_rxtstamp() and they are processed potentially in parallel by the
aux worker thread in nxp_c45_do_aux_work(). This means that it is
possible for nxp_c45_do_aux_work() to process more than one RX timestamp
during the same schedule.
There is one premature optimization that will cause issues: for RX
timestamping, the driver reads the current time only once, and it uses
that to reconstruct all PTP RX timestamps in the queue. For the second
and later timestamps, this will be an issue if we are processing two RX
timestamps which are to the left and to the right, respectively, of a
4-bit wraparound of the 'seconds' portion of the PTP time, and the
current PTP time is also pre-wraparound.
0.000000000 4.000000000 8.000000000 12.000000000
|..................|..................|..................|............>
^ ^ ^ ^ time
| | | |
| | | process hwts 1 and hwts 2
| | |
| | hwts 2
| |
| read current PTP time
|
hwts 1
What will happen in that case is that hwts 2 (post-wraparound) will use
a stale current PTP time that is pre-wraparound.
But nxp_c45_reconstruct_ts will not detect this condition, because it is
not coded up for it, so it will reconstruct hwts 2 with a current time
from the previous 4 second interval (i.e. 0.something instead of
4.something).
This is solvable by making sure that the full 64-bit current time is
always read after the PHY has taken the partial RX timestamp. We do this
by reading the current PTP time for every timestamp in the RX queue.
Fixes: 514def5dd339 ("phy: nxp-c45-tja11xx: add timestamping support")
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
nxp_c45_reconstruct_ts() takes a partial hardware timestamp in @hwts,
with 2 bits of the 'seconds' portion, and a full PTP time in @ts.
It patches in the lower bits of @hwts into @ts, and to ensure that the
reconstructed timestamp is correct, it checks whether the lower 2 bits
of @hwts are not in fact higher than the lower 2 bits of @ts. This is
not logically possible because, according to the calling convention, @ts
was collected later in time than @hwts, but due to two's complement
arithmetic it can actually happen, because the current PTP time might
have wrapped around between when @hwts was collected and when @ts was,
yielding the lower 2 bits of @ts smaller than those of @hwts.
To correct for that situation which is expected to happen under normal
conditions, the driver subtracts exactly one wraparound interval from
the reconstructed timestamp, since the upper bits of that need to
correspond to what the upper bits of @hwts were, not to what the upper
bits of @ts were.
Readers might be confused because the driver denotes the amount of bits
that the partial hardware timestamp has to offer as TS_SEC_MASK
(timestamp mask for seconds). But it subtracts a seemingly unrelated
BIT(2), which is in fact more subtle: if the hardware timestamp provides
2 bits of partial 'seconds' timestamp, then the wraparound interval is
2^2 == BIT(2).
But nonetheless, it is better to express the wraparound interval in
terms of a definition we already have, so replace BIT(2) with
1 + GENMASK(1, 0) which produces the same result but is clearer.
Suggested-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
The SJA1110 switch integrates these PHYs, and they do not have support
for timestamping. This message becomes quite overwhelming:
[ 10.056596] NXP C45 TJA1103 spi1.0-base-t1:01: the phy does not support PTP
[ 10.112625] NXP C45 TJA1103 spi1.0-base-t1:02: the phy does not support PTP
[ 10.167461] NXP C45 TJA1103 spi1.0-base-t1:03: the phy does not support PTP
[ 10.223510] NXP C45 TJA1103 spi1.0-base-t1:04: the phy does not support PTP
[ 10.278239] NXP C45 TJA1103 spi1.0-base-t1:05: the phy does not support PTP
[ 10.332663] NXP C45 TJA1103 spi1.0-base-t1:06: the phy does not support PTP
[ 15.390828] NXP C45 TJA1103 spi1.2-base-t1:01: the phy does not support PTP
[ 15.445224] NXP C45 TJA1103 spi1.2-base-t1:02: the phy does not support PTP
[ 15.499673] NXP C45 TJA1103 spi1.2-base-t1:03: the phy does not support PTP
[ 15.554074] NXP C45 TJA1103 spi1.2-base-t1:04: the phy does not support PTP
[ 15.608516] NXP C45 TJA1103 spi1.2-base-t1:05: the phy does not support PTP
[ 15.662996] NXP C45 TJA1103 spi1.2-base-t1:06: the phy does not support PTP
So reduce its log level to debug.
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zhou Yanjie says:
====================
Add Ingenic SoCs MAC support.
v2->v3:
1.Add "ingenic,mac.yaml" for Ingenic SoCs.
2.Change tx clk delay and rx clk delay from hardware value to ps.
3.return -EINVAL when a unsupported value is encountered when
parsing the binding.
4.Simplify the code of the RGMII part of X2000 SoC according to
Andrew Lunn’s suggestion.
5.Follow the example of "dwmac-mediatek.c" to improve the code
that handles delays according to Andrew Lunn’s suggestion.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for Ingenic SoC MAC glue layer support for the stmmac
device driver. This driver is used on for the MAC ethernet controller
found in the JZ4775 SoC, the X1000 SoC, the X1600 SoC, the X1830 SoC,
and the X2000 SoC.
Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the dwmac bindings for the JZ4775 SoC, the X1000 SoC,
the X1600 SoC, the X1830 SoC and the X2000 SoC from Ingenic.
Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
