IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
[ Upstream commit 3037933448f60f9acb705997eae62013ecb81e0d ]
If the TCA_QFQ_LMAX value is not offered through nlattr, lmax is determined by the MTU value of the network device.
The MTU of the loopback device can be set up to 2^31-1.
As a result, it is possible to have an lmax value that exceeds QFQ_MIN_LMAX.
Due to the invalid lmax value, an index is generated that exceeds the QFQ_MAX_INDEX(=24) value, causing out-of-bounds read/write errors.
The following reports a oob access:
[ 84.582666] BUG: KASAN: slab-out-of-bounds in qfq_activate_agg.constprop.0 (net/sched/sch_qfq.c:1027 net/sched/sch_qfq.c:1060 net/sched/sch_qfq.c:1313)
[ 84.583267] Read of size 4 at addr ffff88810f676948 by task ping/301
[ 84.583686]
[ 84.583797] CPU: 3 PID: 301 Comm: ping Not tainted 6.3.0-rc5 #1
[ 84.584164] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
[ 84.584644] Call Trace:
[ 84.584787] <TASK>
[ 84.584906] dump_stack_lvl (lib/dump_stack.c:107 (discriminator 1))
[ 84.585108] print_report (mm/kasan/report.c:320 mm/kasan/report.c:430)
[ 84.585570] kasan_report (mm/kasan/report.c:538)
[ 84.585988] qfq_activate_agg.constprop.0 (net/sched/sch_qfq.c:1027 net/sched/sch_qfq.c:1060 net/sched/sch_qfq.c:1313)
[ 84.586599] qfq_enqueue (net/sched/sch_qfq.c:1255)
[ 84.587607] dev_qdisc_enqueue (net/core/dev.c:3776)
[ 84.587749] __dev_queue_xmit (./include/net/sch_generic.h:186 net/core/dev.c:3865 net/core/dev.c:4212)
[ 84.588763] ip_finish_output2 (./include/net/neighbour.h:546 net/ipv4/ip_output.c:228)
[ 84.589460] ip_output (net/ipv4/ip_output.c:430)
[ 84.590132] ip_push_pending_frames (./include/net/dst.h:444 net/ipv4/ip_output.c:126 net/ipv4/ip_output.c:1586 net/ipv4/ip_output.c:1606)
[ 84.590285] raw_sendmsg (net/ipv4/raw.c:649)
[ 84.591960] sock_sendmsg (net/socket.c:724 net/socket.c:747)
[ 84.592084] __sys_sendto (net/socket.c:2142)
[ 84.593306] __x64_sys_sendto (net/socket.c:2150)
[ 84.593779] do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
[ 84.593902] entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)
[ 84.594070] RIP: 0033:0x7fe568032066
[ 84.594192] Code: 0e 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 41 89 ca 64 8b 04 25 18 00 00 00 85 c09[ 84.594796] RSP: 002b:00007ffce388b4e8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
Code starting with the faulting instruction
===========================================
[ 84.595047] RAX: ffffffffffffffda RBX: 00007ffce388cc70 RCX: 00007fe568032066
[ 84.595281] RDX: 0000000000000040 RSI: 00005605fdad6d10 RDI: 0000000000000003
[ 84.595515] RBP: 00005605fdad6d10 R08: 00007ffce388eeec R09: 0000000000000010
[ 84.595749] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000040
[ 84.595984] R13: 00007ffce388cc30 R14: 00007ffce388b4f0 R15: 0000001d00000001
[ 84.596218] </TASK>
[ 84.596295]
[ 84.596351] Allocated by task 291:
[ 84.596467] kasan_save_stack (mm/kasan/common.c:46)
[ 84.596597] kasan_set_track (mm/kasan/common.c:52)
[ 84.596725] __kasan_kmalloc (mm/kasan/common.c:384)
[ 84.596852] __kmalloc_node (./include/linux/kasan.h:196 mm/slab_common.c:967 mm/slab_common.c:974)
[ 84.596979] qdisc_alloc (./include/linux/slab.h:610 ./include/linux/slab.h:731 net/sched/sch_generic.c:938)
[ 84.597100] qdisc_create (net/sched/sch_api.c:1244)
[ 84.597222] tc_modify_qdisc (net/sched/sch_api.c:1680)
[ 84.597357] rtnetlink_rcv_msg (net/core/rtnetlink.c:6174)
[ 84.597495] netlink_rcv_skb (net/netlink/af_netlink.c:2574)
[ 84.597627] netlink_unicast (net/netlink/af_netlink.c:1340 net/netlink/af_netlink.c:1365)
[ 84.597759] netlink_sendmsg (net/netlink/af_netlink.c:1942)
[ 84.597891] sock_sendmsg (net/socket.c:724 net/socket.c:747)
[ 84.598016] ____sys_sendmsg (net/socket.c:2501)
[ 84.598147] ___sys_sendmsg (net/socket.c:2557)
[ 84.598275] __sys_sendmsg (./include/linux/file.h:31 net/socket.c:2586)
[ 84.598399] do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
[ 84.598520] entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)
[ 84.598688]
[ 84.598744] The buggy address belongs to the object at ffff88810f674000
[ 84.598744] which belongs to the cache kmalloc-8k of size 8192
[ 84.599135] The buggy address is located 2664 bytes to the right of
[ 84.599135] allocated 7904-byte region [ffff88810f674000, ffff88810f675ee0)
[ 84.599544]
[ 84.599598] The buggy address belongs to the physical page:
[ 84.599777] page:00000000e638567f refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x10f670
[ 84.600074] head:00000000e638567f order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0
[ 84.600330] flags: 0x200000000010200(slab|head|node=0|zone=2)
[ 84.600517] raw: 0200000000010200 ffff888100043180 dead000000000122 0000000000000000
[ 84.600764] raw: 0000000000000000 0000000080020002 00000001ffffffff 0000000000000000
[ 84.601009] page dumped because: kasan: bad access detected
[ 84.601187]
[ 84.601241] Memory state around the buggy address:
[ 84.601396] ffff88810f676800: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 84.601620] ffff88810f676880: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 84.601845] >ffff88810f676900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 84.602069] ^
[ 84.602243] ffff88810f676980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 84.602468] ffff88810f676a00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 84.602693] ==================================================================
[ 84.602924] Disabling lock debugging due to kernel taint
Fixes: 3015f3d2a3cd ("pkt_sched: enable QFQ to support TSO/GSO")
Reported-by: Gwangun Jung <exsociety@gmail.com>
Signed-off-by: Gwangun Jung <exsociety@gmail.com>
Acked-by: Jamal Hadi Salim<jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4fb9a5060f73627303bc531ceaab1b19d0a24aef ]
Since commit f2a9eb975ab2 ("regulator: fan53555: Add support for
FAN53526") the driver makes use of the BIT() macro, but relies on the
bits header being implicitly included.
Explicitly pull the header in to avoid potential build failures in some
configurations.
While here, reorder include directives alphabetically.
Fixes: f2a9eb975ab2 ("regulator: fan53555: Add support for FAN53526")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20230406171806.948290-3-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 94623f579ce338b5fa61b5acaa5beb8aa657fb9e ]
Recent attempt to ensure PREROUTING hook is executed again when a
decrypted ipsec packet received on a bridge passes through the network
stack a second time broke the physdev match in INPUT hook.
We can't discard the nf_bridge info strct from sabotage_in hook, as
this is needed by the physdev match.
Keep the struct around and handle this with another conditional instead.
Fixes: 2b272bb558f1 ("netfilter: br_netfilter: disable sabotage_in hook after first suppression")
Reported-and-tested-by: Farid BENAMROUCHE <fariouche@yahoo.fr>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 85af7ffd24da38e416a14bd6bf207154d94faa83 ]
The osc_32k supports #clock-cells as 0, using an id is wrong, drop it.
Fixes: a6a355ede574 ("arm64: dts: imx8mm-evk: Add 32.768 kHz clock to PMIC")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aec4353114a408b3a831a22ba34942d05943e462 ]
According to S905X2 Datasheet - Revision 07:
DRAM Memory Controller (DMC) register area spans ff638000-ff63a000.
According to DeviceTree Specification - Release v0.4-rc1:
simple-bus nodes do not require reg property.
Fixes: 1499218c80c99a ("arm64: dts: move common G12A & G12B modes to meson-g12-common.dtsi")
Signed-off-by: Marc Gonzalez <mgonzalez@freebox.fr>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20230327120932.2158389-2-mgonzalez@freebox.fr
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 72630ba422b70ea0874fc90d526353cf71c72488 ]
Correct PCIe PHY enablement to refer the QMP device nodes rather than
PHY device nodes. QMP nodes have 'status = "disabled"' property in the
ipq8074.dtsi, while PHY nodes do not correspond to the actual device and
do not have the status property.
Fixes: e8a7fdc505bb ("arm64: dts: ipq8074: qcom: Re-arrange dts nodes based on address")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230324021651.1799969-1-dmitry.baryshkov@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 7dee5d7747a69aa2be41f04c6a7ecfe3ac8cdf18 upstream.
A sysctl variable is accessed concurrently, and there is always a chance
of data-race. So, all readers and writers need some basic protection to
avoid load/store-tearing.
This patch changes proc_dou8vec_minmax() to use READ_ONCE() and
WRITE_ONCE() internally to fix data-races on the sysctl side. For now,
proc_dou8vec_minmax() itself is tolerant to a data-race, but we still
need to add annotations on the other subsystem's side.
Fixes: cb9444130662 ("sysctl: add proc_dou8vec_minmax()")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 05c6257433b7212f07a7e53479a8ab038fc1666a upstream.
Attempting to get a crash dump out of a debug PREEMPT_RT kernel via an NMI
panic() doesn't work. The cause of that lies in the PREEMPT_RT definition
of mutex_trylock():
if (IS_ENABLED(CONFIG_DEBUG_RT_MUTEXES) && WARN_ON_ONCE(!in_task()))
return 0;
This prevents an nmi_panic() from executing the main body of
__crash_kexec() which does the actual kexec into the kdump kernel. The
warning and return are explained by:
6ce47fd961fa ("rtmutex: Warn if trylock is called from hard/softirq context")
[...]
The reasons for this are:
1) There is a potential deadlock in the slowpath
2) Another cpu which blocks on the rtmutex will boost the task
which allegedly locked the rtmutex, but that cannot work
because the hard/softirq context borrows the task context.
Furthermore, grabbing the lock isn't NMI safe, so do away with kexec_mutex
and replace it with an atomic variable. This is somewhat overzealous as
*some* callsites could keep using a mutex (e.g. the sysfs-facing ones
like crash_shrink_memory()), but this has the benefit of involving a
single unified lock and preventing any future NMI-related surprises.
Tested by triggering NMI panics via:
$ echo 1 > /proc/sys/kernel/panic_on_unrecovered_nmi
$ echo 1 > /proc/sys/kernel/unknown_nmi_panic
$ echo 1 > /proc/sys/kernel/panic
$ ipmitool power diag
Link: https://lkml.kernel.org/r/20220630223258.4144112-3-vschneid@redhat.com
Fixes: 6ce47fd961fa ("rtmutex: Warn if trylock is called from hard/softirq context")
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Baoquan He <bhe@redhat.com>
Cc: "Eric W . Biederman" <ebiederm@xmission.com>
Cc: Juri Lelli <jlelli@redhat.com>
Cc: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Wen Yang <wenyang.linux@foxmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7bb5da0d490b2d836c5218f5186ee588d2145310 upstream.
Patch series "kexec, panic: Making crash_kexec() NMI safe", v4.
This patch (of 2):
Most acquistions of kexec_mutex are done via mutex_trylock() - those were
a direct "translation" from:
8c5a1cf0ad3a ("kexec: use a mutex for locking rather than xchg()")
there have however been two additions since then that use mutex_lock():
crash_get_memory_size() and crash_shrink_memory().
A later commit will replace said mutex with an atomic variable, and
locking operations will become atomic_cmpxchg(). Rather than having those
mutex_lock() become while (atomic_cmpxchg(&lock, 0, 1)), turn them into
trylocks that can return -EBUSY on acquisition failure.
This does halve the printable size of the crash kernel, but that's still
neighbouring 2G for 32bit kernels which should be ample enough.
Link: https://lkml.kernel.org/r/20220630223258.4144112-1-vschneid@redhat.com
Link: https://lkml.kernel.org/r/20220630223258.4144112-2-vschneid@redhat.com
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "Eric W . Biederman" <ebiederm@xmission.com>
Cc: Juri Lelli <jlelli@redhat.com>
Cc: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Baoquan He <bhe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Wen Yang <wenyang.linux@foxmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4b692e861619353ce069e547a67c8d0e32d9ef3d upstream.
Patch series "compat: remove compat_alloc_user_space", v5.
Going through compat_alloc_user_space() to convert indirect system call
arguments tends to add complexity compared to handling the native and
compat logic in the same code.
This patch (of 6):
The locking is the same between the native and compat version of
sys_kexec_load(), so it can be done in the common implementation to reduce
duplication.
Link: https://lkml.kernel.org/r/20210727144859.4150043-1-arnd@kernel.org
Link: https://lkml.kernel.org/r/20210727144859.4150043-2-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Co-developed-by: Eric Biederman <ebiederm@xmission.com>
Co-developed-by: Christoph Hellwig <hch@infradead.org>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Wen Yang <wenyang.linux@foxmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e89c2e815e76471cb507bd95728bf26da7976430 upstream.
There are two related issues that appear in certain combinations with
clang and GNU binutils.
The first occurs when a version of clang that supports zicsr or zifencei
via '-march=' [1] (i.e, >= 17.x) is used in combination with a version
of GNU binutils that do not recognize zicsr and zifencei in the
'-march=' value (i.e., < 2.36):
riscv64-linux-gnu-ld: -march=rv64i2p0_m2p0_a2p0_c2p0_zicsr2p0_zifencei2p0: Invalid or unknown z ISA extension: 'zifencei'
riscv64-linux-gnu-ld: failed to merge target specific data of file fs/efivarfs/file.o
riscv64-linux-gnu-ld: -march=rv64i2p0_m2p0_a2p0_c2p0_zicsr2p0_zifencei2p0: Invalid or unknown z ISA extension: 'zifencei'
riscv64-linux-gnu-ld: failed to merge target specific data of file fs/efivarfs/super.o
The second occurs when a version of clang that does not support zicsr or
zifencei via '-march=' (i.e., <= 16.x) is used in combination with a
version of GNU as that defaults to a newer ISA base spec, which requires
specifying zicsr and zifencei in the '-march=' value explicitly (i.e, >=
2.38):
../arch/riscv/kernel/kexec_relocate.S: Assembler messages:
../arch/riscv/kernel/kexec_relocate.S:147: Error: unrecognized opcode `fence.i', extension `zifencei' required
clang-12: error: assembler command failed with exit code 1 (use -v to see invocation)
This is the same issue addressed by commit 6df2a016c0c8 ("riscv: fix
build with binutils 2.38") (see [2] for additional information) but
older versions of clang miss out on it because the cc-option check
fails:
clang-12: error: invalid arch name 'rv64imac_zicsr_zifencei', unsupported standard user-level extension 'zicsr'
clang-12: error: invalid arch name 'rv64imac_zicsr_zifencei', unsupported standard user-level extension 'zicsr'
To resolve the first issue, only attempt to add zicsr and zifencei to
the march string when using the GNU assembler 2.38 or newer, which is
when the default ISA spec was updated, requiring these extensions to be
specified explicitly. LLVM implements an older version of the base
specification for all currently released versions, so these instructions
are available as part of the 'i' extension. If LLVM's implementation is
updated in the future, a CONFIG_AS_IS_LLVM condition can be added to
CONFIG_TOOLCHAIN_NEEDS_EXPLICIT_ZICSR_ZIFENCEI.
To resolve the second issue, use version 2.2 of the base ISA spec when
using an older version of clang that does not support zicsr or zifencei
via '-march=', as that is the spec version most compatible with the one
clang/LLVM implements and avoids the need to specify zicsr and zifencei
explicitly due to still being a part of 'i'.
[1]: 22e199e6af
[2]: https://lore.kernel.org/ZAxT7T9Xy1Fo3d5W@aurel32.net/
Cc: stable@vger.kernel.org
Link: https://github.com/ClangBuiltLinux/linux/issues/1808
Co-developed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230313-riscv-zicsr-zifencei-fiasco-v1-1-dd1b7840a551@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 52cc02b910284d6bddba46cce402044ab775f314 upstream.
LLVM_IAS is the user interface to set the -(no-)integrated-as flag,
and it should be used only for that purpose.
LLVM_IAS is checked in some places to determine the assembler type,
but it is not precise.
For example,
$ make CC=gcc LLVM_IAS=1
... will use the GNU assembler (i.e. binutils) since LLVM_IAS=1 is
effective only when $(CC) is clang.
Of course, 'CC=gcc LLVM_IAS=1' is an odd combination, but the build
system can be more robust against such insane input.
Commit ba64beb17493a ("kbuild: check the minimum assembler version in
Kconfig") introduced CONFIG_AS_IS_GNU/LLVM, which is more precise
because Kconfig checks the version string from the assembler in use.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
[nathan: Backport to 5.10]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2185a7e4b0ade86c2c57fc63d4a7535c40254bd0 upstream.
It has been brought up a few times in various code reviews that clang
3.5 introduced -f{,no-}integrated-as as the preferred way to enable and
disable the integrated assembler, mentioning that -{no-,}integrated-as
are now considered legacy flags.
Switch the kernel over to using those variants in case there is ever a
time where clang decides to remove the non-'f' variants of the flag.
Also, fix a typo in a comment ("intergrated" -> "integrated").
Link: https://releases.llvm.org/3.5.0/tools/clang/docs/ReleaseNotes.html#new-compiler-flags
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
[nathan: Backport to 5.10]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ba64beb17493a4bfec563100c86a462a15926f24 upstream.
Documentation/process/changes.rst defines the minimum assembler version
(binutils version), but we have never checked it in the build time.
Kbuild never invokes 'as' directly because all assembly files in the
kernel tree are *.S, hence must be preprocessed. I do not expect
raw assembly source files (*.s) would be added to the kernel tree.
Therefore, we always use $(CC) as the assembler driver, and commit
aa824e0c962b ("kbuild: remove AS variable") removed 'AS'. However,
we are still interested in the version of the assembler acting behind.
As usual, the --version option prints the version string.
$ as --version | head -n 1
GNU assembler (GNU Binutils for Ubuntu) 2.35.1
But, we do not have $(AS). So, we can add the -Wa prefix so that
$(CC) passes --version down to the backing assembler.
$ gcc -Wa,--version | head -n 1
gcc: fatal error: no input files
compilation terminated.
OK, we need to input something to satisfy gcc.
$ gcc -Wa,--version -c -x assembler /dev/null -o /dev/null | head -n 1
GNU assembler (GNU Binutils for Ubuntu) 2.35.1
The combination of Clang and GNU assembler works in the same way:
$ clang -no-integrated-as -Wa,--version -c -x assembler /dev/null -o /dev/null | head -n 1
GNU assembler (GNU Binutils for Ubuntu) 2.35.1
Clang with the integrated assembler fails like this:
$ clang -integrated-as -Wa,--version -c -x assembler /dev/null -o /dev/null | head -n 1
clang: error: unsupported argument '--version' to option 'Wa,'
For the last case, checking the error message is fragile. If the
proposal for -Wa,--version support [1] is accepted, this may not be
even an error in the future.
One easy way is to check if -integrated-as is present in the passed
arguments. We did not pass -integrated-as to CLANG_FLAGS before, but
we can make it explicit.
Nathan pointed out -integrated-as is the default for all of the
architectures/targets that the kernel cares about, but it goes
along with "explicit is better than implicit" policy. [2]
With all this in my mind, I implemented scripts/as-version.sh to
check the assembler version in Kconfig time.
$ scripts/as-version.sh gcc
GNU 23501
$ scripts/as-version.sh clang -no-integrated-as
GNU 23501
$ scripts/as-version.sh clang -integrated-as
LLVM 0
[1]: https://github.com/ClangBuiltLinux/linux/issues/1320
[2]: https://lore.kernel.org/linux-kbuild/20210307044253.v3h47ucq6ng25iay@archlinux-ax161/
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
[nathan: Backport to 5.10. Drop minimum version checking, as it is not
required in 5.10]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 000987a38b53c172f435142a4026dd71378ca464 upstream.
Make sure to honour the max_hw_heartbeat_ms while programming the timeout
value to WOR. Clamp the timeout passed to sbsa_gwdt_set_timeout() to
make sure the programmed value is within the permissible range.
Fixes: abd3ac7902fb ("watchdog: sbsa: Support architecture version 1")
Signed-off-by: George Cherian <george.cherian@marvell.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230209021117.1512097-1-george.cherian@marvell.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Tyler Hicks (Microsoft) <code@tyhicks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f8160d3b35fc94491bb0cb974dbda310ef96c0e2 ]
In polling mode, no stop condition is generated after a timeout. This
causes SCL to remain low and thereby block the bus. If this happens
during a transfer it can cause slaves to misinterpret the subsequent
transfer and return wrong values.
To solve this, pass the ETIMEDOUT error up from ocores_process_polling()
instead of setting STATE_ERROR directly. The caller is adjusted to call
ocores_process_timeout() on error both in polling and in IRQ mode, which
will set STATE_ERROR and generate a stop condition.
Fixes: 69c8c0c0efa8 ("i2c: ocores: add polling interface")
Signed-off-by: Gregor Herburger <gregor.herburger@tq-group.com>
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Acked-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Federico Vaga <federico.vaga@cern.ch>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 775d3c514c5b2763a50ab7839026d7561795924d ]
set_rtc_noop(), get_rtc_noop() are after booting, therefore their __init
annotation is wrong.
A crash was observed on an x86 platform where CMOS RTC is unused and
disabled via device tree. set_rtc_noop() was invoked from ntp:
sync_hw_clock(), although CONFIG_RTC_SYSTOHC=n, however sync_cmos_clock()
doesn't honour that.
Workqueue: events_power_efficient sync_hw_clock
RIP: 0010:set_rtc_noop
Call Trace:
update_persistent_clock64
sync_hw_clock
Fix this by dropping the __init annotation from set/get_rtc_noop().
Fixes: c311ed6183f4 ("x86/init: Allow DT configured systems to disable RTC at boot time")
Signed-off-by: Matija Glavinic Pecotic <matija.glavinic-pecotic.ext@nokia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/59f7ceb1-446b-1d3d-0bc8-1f0ee94b1e18@nokia.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 91dcf1e8068e9a8823e419a7a34ff4341275fb70 ]
When local group is fully busy but its average load is above system load,
computing the imbalance will overflow and local group is not the best
target for pulling this load.
Fixes: 0b0695f2b34a ("sched/fair: Rework load_balance()")
Reported-by: Tingjia Cao <tjcao980311@gmail.com>
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Tingjia Cao <tjcao980311@gmail.com>
Link: https://lore.kernel.org/lkml/CABcWv9_DAhVBOq2=W=2ypKE9dKM5s2DvoV8-U0+GDwwuKZ89jQ@mail.gmail.com/T/
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 06354900787f25bf5be3c07a68e3cdbc5bf0fa69 ]
In calculate_imbalance function, when the value of local->avg_load is
greater than or equal to busiest->avg_load, the calculated sds->avg_load is
not used. So this calculation can be placed in a more appropriate position.
Signed-off-by: zgpeng <zgpeng@tencent.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Samuel Liao <samuelliao@tencent.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/1649239025-10010-1-git-send-email-zgpeng@tencent.com
Stable-dep-of: 91dcf1e8068e ("sched/fair: Fix imbalance overflow")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b277fc793daf258877b4c0744b52f69d6e6ba22e ]
Platform device helper routines won't update the NUMA distance table
while creating a platform device, even if the device is present on a
NUMA node that doesn't have memory or CPU. This is especially true for
pmem devices. If the target node of the pmem device is not online, we
find the nearest online node to the device and associate the pmem device
with that online node. To find the nearest online node, we should have
the numa distance table updated correctly. Update the distance
information during the device probe.
For a papr scm device on NUMA node 3 distance_lookup_table value for
distance_ref_points_depth = 2 before and after fix is below:
Before fix:
node 3 distance depth 0 - 0
node 3 distance depth 1 - 0
node 4 distance depth 0 - 4
node 4 distance depth 1 - 2
node 5 distance depth 0 - 5
node 5 distance depth 1 - 1
After fix
node 3 distance depth 0 - 3
node 3 distance depth 1 - 1
node 4 distance depth 0 - 4
node 4 distance depth 1 - 2
node 5 distance depth 0 - 5
node 5 distance depth 1 - 1
Without the fix, the nearest numa node to the pmem device (NUMA node 3)
will be picked as 4. After the fix, we get the correct numa node which
is 5.
Fixes: da1115fdbd6e ("powerpc/nvdimm: Pick nearby online node if the device node is not online")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230404041433.1781804-1-aneesh.kumar@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1c6b5a7e74052768977855f95d6b8812f6e7772c ]
PAPR interface currently supports two different ways of communicating resource
grouping details to the OS. These are referred to as Form 0 and Form 1
associativity grouping. Form 0 is the older format and is now considered
deprecated. This patch adds another resource grouping named FORM2.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210812132223.225214-6-aneesh.kumar@linux.ibm.com
Stable-dep-of: b277fc793daf ("powerpc/papr_scm: Update the NUMA distance table for the target node")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ef31cb83d19c4c589d650747cd5a7e502be9f665 ]
This helper is only used with the dispatch trace log collection.
A later patch will add Form2 affinity support and this change helps
in keeping that simpler. Also add a comment explaining we don't expect
the code to be called with FORM0
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210812132223.225214-5-aneesh.kumar@linux.ibm.com
Stable-dep-of: b277fc793daf ("powerpc/papr_scm: Update the NUMA distance table for the target node")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8ddc6448ec5a5ef50eaa581a7dec0e12a02850ff ]
The associativity details of the newly added resourced are collected from
the hypervisor via "ibm,configure-connector" rtas call. Update the numa
distance details of the newly added numa node after the above call.
Instead of updating NUMA distance every time we lookup a node id
from the associativity property, add helpers that can be used
during boot which does this only once. Also remove the distance
update from node id lookup helpers.
Currently, we duplicate parsing code for ibm,associativity and
ibm,associativity-lookup-arrays in the kernel. The associativity array provided
by these device tree properties are very similar and hence can use
a helper to parse the node id and numa distance details.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210812132223.225214-4-aneesh.kumar@linux.ibm.com
Stable-dep-of: b277fc793daf ("powerpc/papr_scm: Update the NUMA distance table for the target node")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0eacd06bb8adea8dd9edb0a30144166d9f227e64 ]
Also make related code cleanup that will allow adding FORM2_AFFINITY in
later patches. No functional change in this patch.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210812132223.225214-3-aneesh.kumar@linux.ibm.com
Stable-dep-of: b277fc793daf ("powerpc/papr_scm: Update the NUMA distance table for the target node")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7e35ef662ca05c42dbc2f401bb76d9219dd7fd02 ]
No functional change in this patch.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210812132223.225214-2-aneesh.kumar@linux.ibm.com
Stable-dep-of: b277fc793daf ("powerpc/papr_scm: Update the NUMA distance table for the target node")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f773f0a331d6c41733b17bebbc1b6cae12e016f5 ]
During the processing of the bgt, if the sync_erase() return -EBUSY
or some other error code in __erase_worker(),schedule_erase() called
again lead to the down_read(ubi->work_sem) hold twice and may get
block by down_write(ubi->work_sem) in ubi_update_fastmap(),
which cause deadlock.
ubi bgt other task
do_work
down_read(&ubi->work_sem) ubi_update_fastmap
erase_worker # Blocked by down_read
__erase_worker down_write(&ubi->work_sem)
schedule_erase
schedule_ubi_work
down_read(&ubi->work_sem)
Fix this by changing input parameter @nested of the schedule_erase() to
'true' to avoid recursively acquiring the down_read(&ubi->work_sem).
Also, fix the incorrect comment about @nested parameter of the
schedule_erase() because when down_write(ubi->work_sem) is held, the
@nested is also need be true.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217093
Fixes: 2e8f08deabbc ("ubi: Fix races around ubi_refill_pools()")
Signed-off-by: ZhaoLong Wang <wangzhaolong1@huawei.com>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ab4e4de9fd8b469823a645f05f2c142e9270b012 ]
Fixes the following W=1 kernel build warning(s):
drivers/mtd/ubi/wl.c:584: warning: Function parameter or member 'nested' not described in 'schedule_erase'
drivers/mtd/ubi/wl.c:1075: warning: Excess function parameter 'shutdown' description in '__erase_worker'
Cc: Richard Weinberger <richard@nod.at>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Cc: linux-mtd@lists.infradead.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20201109182206.3037326-13-lee.jones@linaro.org
Stable-dep-of: f773f0a331d6 ("ubi: Fix deadlock caused by recursively holding work_sem")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 1e020e1b96afdecd20680b5b5be2a6ffc3d27628 upstream.
Following process will make ubi attaching failed since commit
1b42b1a36fc946 ("ubi: ensure that VID header offset ... size"):
ID="0xec,0xa1,0x00,0x15" # 128M 128KB 2KB
modprobe nandsim id_bytes=$ID
flash_eraseall /dev/mtd0
modprobe ubi mtd="0,2048" # set vid_hdr offset as 2048 (one page)
(dmesg):
ubi0 error: ubi_attach_mtd_dev [ubi]: VID header offset 2048 too large.
UBI error: cannot attach mtd0
UBI error: cannot initialize UBI, error -22
Rework original solution, the key point is making sure
'vid_hdr_shift + UBI_VID_HDR_SIZE < ubi->vid_hdr_alsize',
so we should check vid_hdr_shift rather not vid_hdr_offset.
Then, ubi still support (sub)page aligined VID header offset.
Fixes: 1b42b1a36fc946 ("ubi: ensure that VID header offset ... size")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Tested-by: Nicolas Schichan <nschichan@freebox.fr>
Tested-by: Miquel Raynal <miquel.raynal@bootlin.com> # v5.10, v4.19
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ba9182a89626d5f83c2ee4594f55cb9c1e60f0e2 upstream.
After a successful cpuset_can_attach() call which increments the
attach_in_progress flag, either cpuset_cancel_attach() or cpuset_attach()
will be called later. In cpuset_attach(), tasks in cpuset_attach_wq,
if present, will be woken up at the end. That is not the case in
cpuset_cancel_attach(). So missed wakeup is possible if the attach
operation is somehow cancelled. Fix that by doing the wakeup in
cpuset_cancel_attach() as well.
Fixes: e44193d39e8d ("cpuset: let hotplug propagation work wait for task attaching")
Signed-off-by: Waiman Long <longman@redhat.com>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Cc: stable@vger.kernel.org # v3.11+
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f195fc1e9715ba826c3b62d58038f760f66a4fe9 upstream.
The AMD [1022:15b8] USB controller loses some internal functional MSI-X
context when transitioning from D0 to D3hot. BIOS normally traps D0->D3hot
and D3hot->D0 transitions so it can save and restore that internal context,
but some firmware in the field can't do this because it fails to clear the
AMD_15B8_RCC_DEV2_EPF0_STRAP2 NO_SOFT_RESET bit.
Clear AMD_15B8_RCC_DEV2_EPF0_STRAP2 NO_SOFT_RESET bit before USB controller
initialization during boot.
Link: https://lore.kernel.org/linux-usb/Y%2Fz9GdHjPyF2rNG3@glanzmann.de/T/#u
Link: https://lore.kernel.org/r/20230329172859.699743-1-Basavaraj.Natikar@amd.com
Reported-by: Thomas Glanzmann <thomas@glanzmann.de>
Tested-by: Thomas Glanzmann <thomas@glanzmann.de>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c8e22b7a1694bb8d025ea636816472739d859145 upstream.
This reverts commit 3fe97ff3d949 ("scsi: ses: Don't attach if enclosure
has no components") and introduces proper handling of case where there are
no detected secondary components, but primary component (enumerated in
num_enclosures) does exist. That fix was originally proposed by Ding Hui
<dinghui@sangfor.com.cn>.
Completely ignoring devices that have one primary enclosure and no
secondary one results in ses_intf_add() bailing completely
scsi 2:0:0:254: enclosure has no enumerated components
scsi 2:0:0:254: Failed to bind enclosure -12ven in valid configurations such
even on valid configurations with 1 primary and 0 secondary enclosures as
below:
# sg_ses /dev/sg0
3PARdata SES 3321
Supported diagnostic pages:
Supported Diagnostic Pages [sdp] [0x0]
Configuration (SES) [cf] [0x1]
Short Enclosure Status (SES) [ses] [0x8]
# sg_ses -p cf /dev/sg0
3PARdata SES 3321
Configuration diagnostic page:
number of secondary subenclosures: 0
generation code: 0x0
enclosure descriptor list
Subenclosure identifier: 0 [primary]
relative ES process id: 0, number of ES processes: 1
number of type descriptor headers: 1
enclosure logical identifier (hex): 20000002ac02068d
enclosure vendor: 3PARdata product: VV rev: 3321
type descriptor header and text list
Element type: Unspecified, subenclosure id: 0
number of possible elements: 1
The changelog for the original fix follows
=====
We can get a crash when disconnecting the iSCSI session,
the call trace like this:
[ffff00002a00fb70] kfree at ffff00000830e224
[ffff00002a00fba0] ses_intf_remove at ffff000001f200e4
[ffff00002a00fbd0] device_del at ffff0000086b6a98
[ffff00002a00fc50] device_unregister at ffff0000086b6d58
[ffff00002a00fc70] __scsi_remove_device at ffff00000870608c
[ffff00002a00fca0] scsi_remove_device at ffff000008706134
[ffff00002a00fcc0] __scsi_remove_target at ffff0000087062e4
[ffff00002a00fd10] scsi_remove_target at ffff0000087064c0
[ffff00002a00fd70] __iscsi_unbind_session at ffff000001c872c4
[ffff00002a00fdb0] process_one_work at ffff00000810f35c
[ffff00002a00fe00] worker_thread at ffff00000810f648
[ffff00002a00fe70] kthread at ffff000008116e98
In ses_intf_add, components count could be 0, and kcalloc 0 size scomp,
but not saved in edev->component[i].scratch
In this situation, edev->component[0].scratch is an invalid pointer,
when kfree it in ses_intf_remove_enclosure, a crash like above would happen
The call trace also could be other random cases when kfree cannot catch
the invalid pointer
We should not use edev->component[] array when the components count is 0
We also need check index when use edev->component[] array in
ses_enclosure_data_process
=====
Reported-by: Michal Kolar <mich.k@seznam.cz>
Originally-by: Ding Hui <dinghui@sangfor.com.cn>
Cc: stable@vger.kernel.org
Fixes: 3fe97ff3d949 ("scsi: ses: Don't attach if enclosure has no components")
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Link: https://lore.kernel.org/r/nycvar.YFH.7.76.2304042122270.29760@cbobk.fhfr.pm
Tested-by: Michal Kolar <mich.k@seznam.cz>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 813c2dd78618f108fdcf9cd726ea90f081ee2881 upstream.
sfp->i2c_block_size is initialized at SFP module insertion in
sfp_sm_mod_probe(). Because of that, if SFP module was never inserted
since boot, sfp_read() call will lead to zero-length I2C read attempt,
and not all I2C controllers are happy with zero-length reads.
One way to issue sfp_read() on empty SFP cage is to execute ethtool -m.
If SFP module was never plugged since boot, there will be a zero-length
I2C read attempt.
# ethtool -m xge0
i2c i2c-3: adapter quirk: no zero length (addr 0x0050, size 0, read)
Cannot get Module EEPROM data: Operation not supported
If SFP module was plugged then removed at least once,
sfp->i2c_block_size will be initialized and ethtool -m will fail with
different exit code and without I2C error
# ethtool -m xge0
Cannot get Module EEPROM data: Remote I/O error
Fix this by initializing sfp->i2_block_size at struct sfp allocation
stage so no wild sfp_read() could issue zero-length I2C read.
Signed-off-by: Ivan Bornyakov <i.bornyakov@metrotek.ru>
Fixes: 0d035bed2a4a ("net: sfp: VSOL V2801F / CarlitoxxPro CPGOS03-0490 v2.0 workaround")
Cc: stable@vger.kernel.org
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8d736482749f6d350892ef83a7a11d43cd49981e upstream.
In a NOMMU kernel, sigreturn trampolines are generated on the user
stack by setup_rt_frame. Currently, these trampolines are not instruction
fenced, thus their visibility to ifetch is not guaranteed.
This patch adds a flush_icache_range in setup_rt_frame to fix this
problem.
Signed-off-by: Mathis Salmen <mathis.salmen@matsal.de>
Fixes: 6bd33e1ece52 ("riscv: add nommu support")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230406101130.82304-1-mathis.salmen@matsal.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 3584c1dbfffdabf8e3dc1dd25748bb38dd01cd43 ]
These particular errors can be encountered while trying to kexec when
secureboot lockdown is in place. Without this change, even with a
signed debug build, one still needs to reboot the machine to add the
appropriate dyndbg parameters (since lockdown blocks debugfs).
Accordingly, upgrade all pr_debug() before fatal error into pr_warn().
Signed-off-by: Robbie Harwood <rharwood@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jarkko Sakkinen <jarkko@kernel.org>
cc: Eric Biederman <ebiederm@xmission.com>
cc: Herbert Xu <herbert@gondor.apana.org.au>
cc: keyrings@vger.kernel.org
cc: linux-crypto@vger.kernel.org
cc: kexec@lists.infradead.org
Link: https://lore.kernel.org/r/20230220171254.592347-3-rharwood@redhat.com/ # v2
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 03aecb1acbcd7a660f97d645ca6c09d9de27ff9d ]
Like the Windows Lenovo Yoga Book X91F/L the Android Lenovo Yoga Book
X90F/L has a portrait 1200x1920 screen used in landscape mode,
add a quirk for this.
When the quirk for the X91F/L was initially added it was written to
also apply to the X90F/L but this does not work because the Android
version of the Yoga Book uses completely different DMI strings.
Also adjust the X91F/L quirk to reflect that it only applies to
the X91F/L models.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230301095218.28457-1-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5ed213dd64681f84a01ceaa82fb336cf7d59ddcf ]
Another Lenovo convertable which reports a landscape resolution of
1920x1200 with a pitch of (1920 * 4) bytes, while the actual framebuffer
has a resolution of 1200x1920 with a pitch of (1200 * 4) bytes.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 987dd36c0141f6ab9f0fbf14d6b2ec3342dedb2f ]
When start sending a new message clear the Rx & Tx buffer pointers in
order to avoid using stale pointers.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Tested-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 139f6973bf140c65d4d1d4bde5485badb4454d7a ]
The driver can be compile tested with !CONFIG_OF making certain data
unused:
drivers/net/wireless/marvell/mwifiex/sdio.c:498:34: error: ‘mwifiex_sdio_of_match_table’ defined but not used [-Werror=unused-const-variable=]
drivers/net/wireless/marvell/mwifiex/pcie.c:175:34: error: ‘mwifiex_pcie_of_match_table’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230312132523.352182-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 14c76b2e75bca4d96e2b85a0c12aa43e84fe3f74 ]
This doesn't need to be printed every second as an error:
...
<3>[17438.628385] cros-usbpd-charger cros-usbpd-charger.3.auto: Port 1: default case!
<3>[17439.634176] cros-usbpd-charger cros-usbpd-charger.3.auto: Port 1: default case!
<3>[17440.640298] cros-usbpd-charger cros-usbpd-charger.3.auto: Port 1: default case!
...
Reduce priority from ERROR to DEBUG.
Signed-off-by: Grant Grundler <grundler@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 872aec4b5f635d94111d48ec3c57fbe078d64e7d ]
btf_dump APIs emit unnecessary tabs when emitting struct/union
definition that fits on the single line. Before this patch we'd get:
struct blah {<tab>};
This patch fixes this and makes sure that we get more natural:
struct blah {};
Fixes: 44a726c3f23c ("bpftool: Print newline before '}' for struct with padding only fields")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20221212211505.558851-2-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1c5950fc6fe996235f1d18539b9c6b64b597f50f ]
lena wang reported an issue caused by udpv6_sendmsg()
mangling msg->msg_name and msg->msg_namelen, which
are later read from ____sys_sendmsg() :
/*
* If this is sendmmsg() and sending to current destination address was
* successful, remember it.
*/
if (used_address && err >= 0) {
used_address->name_len = msg_sys->msg_namelen;
if (msg_sys->msg_name)
memcpy(&used_address->name, msg_sys->msg_name,
used_address->name_len);
}
udpv6_sendmsg() wants to pretend the remote address family
is AF_INET in order to call udp_sendmsg().
A fix would be to modify the address in-place, instead
of using a local variable, but this could have other side effects.
Instead, restore initial values before we return from udpv6_sendmsg().
Fixes: c71d8ebe7a44 ("net: Fix security_socket_sendmsg() bypass problem.")
Reported-by: lena wang <lena.wang@mediatek.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Maciej Żenczykowski <maze@google.com>
Link: https://lore.kernel.org/r/20230412130308.1202254-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 32832a2caf82663870126c5186cf8f86c8b2a649 ]
Currently, when traversing ifwdtsn skips with _sctp_walk_ifwdtsn, it only
checks the pos against the end of the chunk. However, the data left for
the last pos may be < sizeof(struct sctp_ifwdtsn_skip), and dereference
it as struct sctp_ifwdtsn_skip may cause coverflow.
This patch fixes it by checking the pos against "the end of the chunk -
sizeof(struct sctp_ifwdtsn_skip)" in sctp_ifwdtsn_skip, similar to
sctp_fwdtsn_skip.
Fixes: 0fc2ea922c8a ("sctp: implement validate_ftsn for sctp_stream_interleave")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/2a71bffcd80b4f2c61fac6d344bb2f11c8fd74f7.1681155810.git.lucien.xin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7573099e10ca69c3be33995c1fcd0d241226816d ]
Static code analyzer complains to unchecked return value.
The result of pci_reset_function() is unchecked.
Despite, the issue is on the FLR supported code path and in that
case reset can be done with pcie_flr(), the patch uses less invasive
approach by adding the result check of pci_reset_function().
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 7e2cf4feba05 ("qlcnic: change driver hardware interface mechanism")
Signed-off-by: Denis Plotnikov <den-plotnikov@yandex-team.ru>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
