iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
1,215,119 Commits 104 Branches 1,843 Tags
Commit Graph

490 Commits

Author SHA1 Message Date
Linus Torvalds
0c02183427 ARM: 
* Clean up vCPU targets, always returning generic v8 as the preferred target
 
 * Trap forwarding infrastructure for nested virtualization (used for traps
   that are taken from an L2 guest and are needed by the L1 hypervisor)
 
 * FEAT_TLBIRANGE support to only invalidate specific ranges of addresses
   when collapsing a table PTE to a block PTE.  This avoids that the guest
   refills the TLBs again for addresses that aren't covered by the table PTE.
 
 * Fix vPMU issues related to handling of PMUver.
 
 * Don't unnecessary align non-stack allocations in the EL2 VA space
 
 * Drop HCR_VIRT_EXCP_MASK, which was never used...
 
 * Don't use smp_processor_id() in kvm_arch_vcpu_load(),
   but the cpu parameter instead
 
 * Drop redundant call to kvm_set_pfn_accessed() in user_mem_abort()
 
 * Remove prototypes without implementations
 
 RISC-V:
 
 * Zba, Zbs, Zicntr, Zicsr, Zifencei, and Zihpm support for guest
 
 * Added ONE_REG interface for SATP mode
 
 * Added ONE_REG interface to enable/disable multiple ISA extensions
 
 * Improved error codes returned by ONE_REG interfaces
 
 * Added KVM_GET_REG_LIST ioctl() implementation for KVM RISC-V
 
 * Added get-reg-list selftest for KVM RISC-V
 
 s390:
 
 * PV crypto passthrough enablement (Tony, Steffen, Viktor, Janosch)
   Allows a PV guest to use crypto cards. Card access is governed by
   the firmware and once a crypto queue is "bound" to a PV VM every
   other entity (PV or not) looses access until it is not bound
   anymore. Enablement is done via flags when creating the PV VM.
 
 * Guest debug fixes (Ilya)
 
 x86:
 
 * Clean up KVM's handling of Intel architectural events
 
 * Intel bugfixes
 
 * Add support for SEV-ES DebugSwap, allowing SEV-ES guests to use debug
   registers and generate/handle #DBs
 
 * Clean up LBR virtualization code
 
 * Fix a bug where KVM fails to set the target pCPU during an IRTE update
 
 * Fix fatal bugs in SEV-ES intrahost migration
 
 * Fix a bug where the recent (architecturally correct) change to reinject
   #BP and skip INT3 broke SEV guests (can't decode INT3 to skip it)
 
 * Retry APIC map recalculation if a vCPU is added/enabled
 
 * Overhaul emergency reboot code to bring SVM up to par with VMX, tie the
   "emergency disabling" behavior to KVM actually being loaded, and move all of
   the logic within KVM
 
 * Fix user triggerable WARNs in SVM where KVM incorrectly assumes the TSC
   ratio MSR cannot diverge from the default when TSC scaling is disabled
   up related code
 
 * Add a framework to allow "caching" feature flags so that KVM can check if
   the guest can use a feature without needing to search guest CPUID
 
 * Rip out the ancient MMU_DEBUG crud and replace the useful bits with
   CONFIG_KVM_PROVE_MMU
 
 * Fix KVM's handling of !visible guest roots to avoid premature triple fault
   injection
 
 * Overhaul KVM's page-track APIs, and KVMGT's usage, to reduce the API surface
   that is needed by external users (currently only KVMGT), and fix a variety
   of issues in the process
 
 This last item had a silly one-character bug in the topic branch that
 was sent to me.  Because it caused pretty bad selftest failures in
 some configurations, I decided to squash in the fix.  So, while the
 exact commit ids haven't been in linux-next, the code has (from the
 kvm-x86 tree).
 
 Generic:
 
 * Wrap kvm_{gfn,hva}_range.pte in a union to allow mmu_notifier events to pass
   action specific data without needing to constantly update the main handlers.
 
 * Drop unused function declarations
 
 Selftests:
 
 * Add testcases to x86's sync_regs_test for detecting KVM TOCTOU bugs
 
 * Add support for printf() in guest code and covert all guest asserts to use
   printf-based reporting
 
 * Clean up the PMU event filter test and add new testcases
 
 * Include x86 selftests in the KVM x86 MAINTAINERS entry
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmT1m0kUHHBib256aW5p
 QHJlZGhhdC5jb20ACgkQv/vSX3jHroMNgggAiN7nz6UC423FznuI+yO3TLm8tkx1
 CpKh5onqQogVtchH+vrngi97cfOzZb1/AtifY90OWQi31KEWhehkeofcx7G6ERhj
 5a9NFADY1xGBsX4exca/VHDxhnzsbDWaWYPXw5vWFWI6erft9Mvy3tp1LwTvOzqM
 v8X4aWz+g5bmo/DWJf4Wu32tEU6mnxzkrjKU14JmyqQTBawVmJ3RYvHVJ/Agpw+n
 hRtPAy7FU6XTdkmq/uCT+KUHuJEIK0E/l1js47HFAqSzwdW70UDg14GGo1o4ETxu
 RjZQmVNvL57yVgi6QU38/A0FWIsWQm5IlaX1Ug6x8pjZPnUKNbo9BY4T1g==
 =W+4p
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull kvm updates from Paolo Bonzini:
 "ARM:

   - Clean up vCPU targets, always returning generic v8 as the preferred
     target

   - Trap forwarding infrastructure for nested virtualization (used for
     traps that are taken from an L2 guest and are needed by the L1
     hypervisor)

   - FEAT_TLBIRANGE support to only invalidate specific ranges of
     addresses when collapsing a table PTE to a block PTE. This avoids
     that the guest refills the TLBs again for addresses that aren't
     covered by the table PTE.

   - Fix vPMU issues related to handling of PMUver.

   - Don't unnecessary align non-stack allocations in the EL2 VA space

   - Drop HCR_VIRT_EXCP_MASK, which was never used...

   - Don't use smp_processor_id() in kvm_arch_vcpu_load(), but the cpu
     parameter instead

   - Drop redundant call to kvm_set_pfn_accessed() in user_mem_abort()

   - Remove prototypes without implementations

  RISC-V:

   - Zba, Zbs, Zicntr, Zicsr, Zifencei, and Zihpm support for guest

   - Added ONE_REG interface for SATP mode

   - Added ONE_REG interface to enable/disable multiple ISA extensions

   - Improved error codes returned by ONE_REG interfaces

   - Added KVM_GET_REG_LIST ioctl() implementation for KVM RISC-V

   - Added get-reg-list selftest for KVM RISC-V

  s390:

   - PV crypto passthrough enablement (Tony, Steffen, Viktor, Janosch)

     Allows a PV guest to use crypto cards. Card access is governed by
     the firmware and once a crypto queue is "bound" to a PV VM every
     other entity (PV or not) looses access until it is not bound
     anymore. Enablement is done via flags when creating the PV VM.

   - Guest debug fixes (Ilya)

  x86:

   - Clean up KVM's handling of Intel architectural events

   - Intel bugfixes

   - Add support for SEV-ES DebugSwap, allowing SEV-ES guests to use
     debug registers and generate/handle #DBs

   - Clean up LBR virtualization code

   - Fix a bug where KVM fails to set the target pCPU during an IRTE
     update

   - Fix fatal bugs in SEV-ES intrahost migration

   - Fix a bug where the recent (architecturally correct) change to
     reinject #BP and skip INT3 broke SEV guests (can't decode INT3 to
     skip it)

   - Retry APIC map recalculation if a vCPU is added/enabled

   - Overhaul emergency reboot code to bring SVM up to par with VMX, tie
     the "emergency disabling" behavior to KVM actually being loaded,
     and move all of the logic within KVM

   - Fix user triggerable WARNs in SVM where KVM incorrectly assumes the
     TSC ratio MSR cannot diverge from the default when TSC scaling is
     disabled up related code

   - Add a framework to allow "caching" feature flags so that KVM can
     check if the guest can use a feature without needing to search
     guest CPUID

   - Rip out the ancient MMU_DEBUG crud and replace the useful bits with
     CONFIG_KVM_PROVE_MMU

   - Fix KVM's handling of !visible guest roots to avoid premature
     triple fault injection

   - Overhaul KVM's page-track APIs, and KVMGT's usage, to reduce the
     API surface that is needed by external users (currently only
     KVMGT), and fix a variety of issues in the process

  Generic:

   - Wrap kvm_{gfn,hva}_range.pte in a union to allow mmu_notifier
     events to pass action specific data without needing to constantly
     update the main handlers.

   - Drop unused function declarations

  Selftests:

   - Add testcases to x86's sync_regs_test for detecting KVM TOCTOU bugs

   - Add support for printf() in guest code and covert all guest asserts
     to use printf-based reporting

   - Clean up the PMU event filter test and add new testcases

   - Include x86 selftests in the KVM x86 MAINTAINERS entry"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (279 commits)
  KVM: x86/mmu: Include mmu.h in spte.h
  KVM: x86/mmu: Use dummy root, backed by zero page, for !visible guest roots
  KVM: x86/mmu: Disallow guest from using !visible slots for page tables
  KVM: x86/mmu: Harden TDP MMU iteration against root w/o shadow page
  KVM: x86/mmu: Harden new PGD against roots without shadow pages
  KVM: x86/mmu: Add helper to convert root hpa to shadow page
  drm/i915/gvt: Drop final dependencies on KVM internal details
  KVM: x86/mmu: Handle KVM bookkeeping in page-track APIs, not callers
  KVM: x86/mmu: Drop @slot param from exported/external page-track APIs
  KVM: x86/mmu: Bug the VM if write-tracking is used but not enabled
  KVM: x86/mmu: Assert that correct locks are held for page write-tracking
  KVM: x86/mmu: Rename page-track APIs to reflect the new reality
  KVM: x86/mmu: Drop infrastructure for multiple page-track modes
  KVM: x86/mmu: Use page-track notifiers iff there are external users
  KVM: x86/mmu: Move KVM-only page-track declarations to internal header
  KVM: x86: Remove the unused page-track hook track_flush_slot()
  drm/i915/gvt: switch from ->track_flush_slot() to ->track_remove_region()
  KVM: x86: Add a new page-track hook to handle memslot deletion
  drm/i915/gvt: Don't bother removing write-protection on to-be-deleted slot
  KVM: x86: Reject memslot MOVE operations if KVMGT is attached
  ...
 2023-09-07 13:52:20 -07:00
Paolo Bonzini
bd7fe98b35 KVM: x86: SVM changes for 6.6: 
- Add support for SEV-ES DebugSwap, i.e. allow SEV-ES guests to use debug
    registers and generate/handle #DBs
 
  - Clean up LBR virtualization code
 
  - Fix a bug where KVM fails to set the target pCPU during an IRTE update
 
  - Fix fatal bugs in SEV-ES intrahost migration
 
  - Fix a bug where the recent (architecturally correct) change to reinject
    #BP and skip INT3 broke SEV guests (can't decode INT3 to skip it)
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCgAwFiEEMHr+pfEFOIzK+KY1YJEiAU0MEvkFAmTue8YSHHNlYW5qY0Bn
 b29nbGUuY29tAAoJEGCRIgFNDBL5aqUP/jF7DyMXyQGYMKoQhFxWyGRhfqV8Ov8i
 7sUpEKSx5WTxOsFHBgdGeNU+m9eBJHWVmrJM9imI4OCUvJmxasRRsnyhvEUvBIUE
 amQT45aVm2xqjRNRUkOCUUHiDKtUdwpSRlOSyhnDTKmlMbNoH+fO3SLJ1oB/fsae
 wnmyiF98j2vT/5mD6F/F87hlNMq4CqG/OZWJ9Kk8GfvfJpUcC8r/H0NsMgSMF2/L
 Q+Hn+r/XDfMSrBiyEzevWyPbJi7nL+WF9EQDJASf+aAkmFMHK6AU4XNITwVw3XcZ
 FGtSP/NzvnePhd5gqtbiW9hRQkWcKjqnydtyI3ZDVVBpEbJ6OJn3+UFoLZ8NoSE+
 D3EDs1PA7Qjty6kYx9/NZpXz5BAMd9mikkTL7PTrlrAZAEimToqoHx7mBjmLp4E+
 diKrpG2w1OTtO/Pafi0z0zZN6Yc9MJOyZVK78DpIiLey3rNip9SawWGh+wV14WNC
 nbn7Wpf8EGE1E8n00mwrGMRCuRm7LQhLbcVXITiGKrbpxUzam6sqDIgt73Q7xma2
 NWcPizeFNy47uurNOA2V9xHkbEAYjWaM12uyzmGzILvvmvNnpU0NuZ78cgV5ZWMk
 4US53CAQbG4+qUCJWhIDoriluaLXjL9tLiZgJW0T6cus3nL5NWYqvlq6TWYyK00J
 zjiK7vky77Pq
 =WC5V
 -----END PGP SIGNATURE-----

Merge tag 'kvm-x86-svm-6.6' of https://github.com/kvm-x86/linux into HEAD

KVM: x86: SVM changes for 6.6:

 - Add support for SEV-ES DebugSwap, i.e. allow SEV-ES guests to use debug
   registers and generate/handle #DBs

 - Clean up LBR virtualization code

 - Fix a bug where KVM fails to set the target pCPU during an IRTE update

 - Fix fatal bugs in SEV-ES intrahost migration

 - Fix a bug where the recent (architecturally correct) change to reinject
   #BP and skip INT3 broke SEV guests (can't decode INT3 to skip it)
 2023-08-31 13:32:40 -04:00
Linus Torvalds
1687d8aca5 * Rework apic callbacks, getting rid of unnecessary ones and 
coalescing lots of silly duplicates.
  * Use static_calls() instead of indirect calls for apic->foo()
  * Tons of cleanups an crap removal along the way
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEV76QKkVc4xCGURexaDWVMHDJkrAFAmTvfO8ACgkQaDWVMHDJ
 krAP2A//ccii/LuvtTnNEIMMR5w2rwTdHv91ancgFkC8pOeNk37Z8sSLq8tKuLFA
 vgjBIysVIqunuRcNCJ+eqwIIxYfU+UGCWHppzLwO+DY3Q7o9EoTL0BgytdAqxpQQ
 ntEVarqWq25QYXKFoAqbUTJ1UXa42/8HfiXAX/jvP+ACXfilkGPZre6ASxlXeOhm
 XbgPuNQPmXi2WYQH9GCQEsz2Nh80hKap8upK2WbQzzJ3lXsm+xA//4klab0HCYwl
 Uc302uVZozyXRMKbAlwmgasTFOLiV8KKriJ0oHoktBpWgkpdR9uv/RDeSaFR3DAl
 aFmecD4k/Hqezg4yVl+4YpEn2KjxiwARCm4PMW5AV7lpWBPBHAOOai65yJlAi9U6
 bP8pM0+aIx9xg7oWfsTnQ7RkIJ+GZ0w+KZ9LXFM59iu3eV1pAJE3UVyUehe/J1q9
 n8OcH0UeHRlAb8HckqVm1AC7IPvfHw4OAPtUq7z3NFDwbq6i651Tu7f+i2bj31cX
 77Ames+fx6WjxUjyFbJwaK44E7Qez3waztdBfn91qw+m0b+gnKE3ieDNpJTqmm5b
 mKulV7KJwwS6cdqY3+Kr+pIlN+uuGAv7wGzVLcaEAXucDsVn/YAMJHY2+v97xv+n
 J9N+yeaYtmSXVlDsJ6dndMrTQMmcasK1CVXKxs+VYq5Lgf+A68w=
 =eoKm
 -----END PGP SIGNATURE-----

Merge tag 'x86_apic_for_6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 apic updates from Dave Hansen:
 "This includes a very thorough rework of the 'struct apic' handlers.
  Quite a variety of them popped up over the years, especially in the
  32-bit days when odd apics were much more in vogue.

  The end result speaks for itself, which is a removal of a ton of code
  and static calls to replace indirect calls.

  If there's any breakage here, it's likely to be around the 32-bit
  museum pieces that get light to no testing these days.

  Summary:

   - Rework apic callbacks, getting rid of unnecessary ones and
     coalescing lots of silly duplicates.

   - Use static_calls() instead of indirect calls for apic->foo()

   - Tons of cleanups an crap removal along the way"

* tag 'x86_apic_for_6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (64 commits)
  x86/apic: Turn on static calls
  x86/apic: Provide static call infrastructure for APIC callbacks
  x86/apic: Wrap IPI calls into helper functions
  x86/apic: Mark all hotpath APIC callback wrappers __always_inline
  x86/xen/apic: Mark apic __ro_after_init
  x86/apic: Convert other overrides to apic_update_callback()
  x86/apic: Replace acpi_wake_cpu_handler_update() and apic_set_eoi_cb()
  x86/apic: Provide apic_update_callback()
  x86/xen/apic: Use standard apic driver mechanism for Xen PV
  x86/apic: Provide common init infrastructure
  x86/apic: Wrap apic->native_eoi() into a helper
  x86/apic: Nuke ack_APIC_irq()
  x86/apic: Remove pointless arguments from [native_]eoi_write()
  x86/apic/noop: Tidy up the code
  x86/apic: Remove pointless NULL initializations
  x86/apic: Sanitize APIC ID range validation
  x86/apic: Prepare x2APIC for using apic::max_apic_id
  x86/apic: Simplify X2APIC ID validation
  x86/apic: Add max_apic_id member
  x86/apic: Wrap APIC ID validation into an inline
  ...
 2023-08-30 10:44:46 -07:00
Linus Torvalds
b03a434214 seccomp updates for v6.6-rc1 
- Provide USER_NOTIFY flag for synchronous mode (Andrei Vagin, Peter
   Oskolkov). This touches the scheduler and perf but has been Acked by
   Peter Zijlstra.
 
 - Fix regression in syscall skipping and restart tracing on arm32.
   This touches arch/arm/ but has been Acked by Arnd Bergmann.
 -----BEGIN PGP SIGNATURE-----
 
 iQJKBAABCgA0FiEEpcP2jyKd1g9yPm4TiXL039xtwCYFAmTs418WHGtlZXNjb29r
 QGNocm9taXVtLm9yZwAKCRCJcvTf3G3AJohpD/4tEfRdnb/KDgwQ7uvqBonUJXcx
 wqw17LZCGTpBV3/Tp3+aEseD1NezOxiMJL88VyUHSy7nfDJShbL6QtyoenwEOeXJ
 HmBUfcIH3cqRutHEJ3drYBzBetpeeK2G+gTYVj+JoEfPWyPf+Egj+1JE2n1xLi92
 WC1miBAyBZ59kN+D1hcDzJu24CkAwbcUYlEzGejN5lBOwxYV3/fjARBVRvefOO5m
 jljSCIVJOFgCiybKhJ7Zw1+lkFc3cIlcOgr4/ZegSc8PxFVebnuImTHHp/gvoo6F
 7d1xe5Hk+PSfNvVq41MAeRB2vK2tY5efwjXRarThUaydPTO43KiQm0dzP0EYWK9a
 LcOg8zAXZnpvuWU5O2SqUKADcxe2TjS1WuQ/Q4ixxgKz2kJKDwrNU8Frf327eLSR
 acfZgMMiUfEXyXDV9B3LzNAtwdvwyxYrzEzxgKywhThIhZmQDat0rI2IaTV5QIc5
 pkxiFEe0TPwpzyUVO9dSzE+ughTmNQOKk5uAM9e2NwRwVdhEmlZAxo0kStJ1NoaA
 yDjYIKfaNBElchL4v2931KJFJseI+uRaWdW10JEV+1M69+gEAEs6wbmAxtcYS776
 xWsYp3slXzlmeVyvQp/ah8p0y55r+qTbcnhkvIdiwLYei4Bh3KOoJUlVmW0V5dKq
 b+7qspIvBA0kKRAqPw==
 =DI8R
 -----END PGP SIGNATURE-----

Merge tag 'seccomp-v6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux

Pull seccomp updates from Kees Cook:

 - Provide USER_NOTIFY flag for synchronous mode (Andrei Vagin, Peter
   Oskolkov). This touches the scheduler and perf but has been Acked by
   Peter Zijlstra.

 - Fix regression in syscall skipping and restart tracing on arm32. This
   touches arch/arm/ but has been Acked by Arnd Bergmann.

* tag 'seccomp-v6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  seccomp: Add missing kerndoc notations
  ARM: ptrace: Restore syscall skipping for tracers
  ARM: ptrace: Restore syscall restart tracing
  selftests/seccomp: Handle arm32 corner cases better
  perf/benchmark: add a new benchmark for seccom_unotify
  selftest/seccomp: add a new test for the sync mode of seccomp_user_notify
  seccomp: add the synchronous mode for seccomp_unotify
  sched: add a few helpers to wake up tasks on the current cpu
  sched: add WF_CURRENT_CPU and externise ttwu
  seccomp: don't use semaphore and wait_queue together
 2023-08-28 12:38:26 -07:00
Linus Torvalds
eabeef9054 asm-generic: regression fix for 6.5 
Just one partial revert for a commit from the merge window
 that caused annoying behavior when building old kernels on
 arm64 hosts.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmTe0Z8ACgkQYKtH/8kJ
 UidZGQ/9GFtIHh9QK6XPlAlx3oC6HdFUrOqDwoueNd4sFk9nNAuW+Z/a0YX8DtnQ
 /SrJPiCtoPPNCMNlxk7ZDx+ra0Tu+iC7rAvRnogKSV8qB35jNLIqhEde2opCa2Dx
 sfmvtP0hr5c+b8UP9IN2U11WvJhv1yjldHtCKAjSf9zMtwPQjQvAIx1kzSlC57kE
 zjsKVTB3yXUddhYGR7639RT7/1K25BVcG6kfKIEN/uPm+M/ljk58EJhUhSeEEfBf
 NmtlhxWzJBySOTk5mjEVUsTAPrAckPI3Vh4sf0qd4rXe4Q+XX9Jvur9kPOoF8lQF
 GO+WXrmooaEir3+1+w4PB9xXgZD26Iz018xdhcigLgEGefieM1JpvwJa8NarK8UK
 iLg2+sBvCAJPJQ44E4r1hWf8ZFolEhwzg703/fGIjDPMQnhHNay4i73NyCw4ii2c
 F+iCFhea5AKz+d5qQuaZmg7klY/4cBIKDVY/EsO4lmK0187eq3zZKJSMLD21+NLy
 kr63OAV8yXbduLsIOjvR3KrbSvMq+9vasEX4zUGlzA+VR1l+MqtwJI13EPyqhubJ
 kQQi6PUe/353ECdzwk5IAqMbGP7qhkOuv89+Ff9mPTlKAwDPwdZjbnsz5I5peskB
 zVBO366Z0w3o2ENv9i4UEa+TtaCMIbLWdXJxPufwoqPHX3v7nUM=
 =tTzL
 -----END PGP SIGNATURE-----

Merge tag 'asm-generic-fix-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic

Pull asm-generic regression fix from Arnd Bergmann:
 "Just one partial revert for a commit from the merge window that caused
  annoying behavior when building old kernels on arm64 hosts"

* tag 'asm-generic-fix-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  asm-generic: partially revert "Unify uapi bitsperlong.h for arm64, riscv and loongarch"
 2023-08-18 18:13:36 +02:00
Arnd Bergmann
6e8d96909a asm-generic: partially revert "Unify uapi bitsperlong.h for arm64, riscv and loongarch" 
Unifying the asm-generic headers across 32-bit and 64-bit architectures
based on the compiler provided macros was a good idea and appears to work
with all user space, but it caused a regression when building old kernels
on systems that have the new headers installed in /usr/include, as this
combination trips an inconsistency in the kernel's own tools/include
headers that are a mix of userspace and kernel-internal headers.

This affects kernel builds on arm64, riscv64 and loongarch64 systems that
might end up using the "#define __BITS_PER_LONG 32" default from the old
tools headers. Backporting the commit into stable kernels would address
this, but it would still break building kernels without that backport,
and waste time for developers trying to understand the problem.

arm64 build machines are rather common, and on riscv64 this can also
happen in practice, but loongarch64 is probably new enough to not
be used much for building old kernels, so only revert the bits
for arm64 and riscv.

Link: https://lore.kernel.org/all/20230731160402.GB1823389@dev-arch.thelio-3990X/
Reported-by: Nathan Chancellor <nathan@kernel.org>
Fixes: 8386f58f8deda ("asm-generic: Unify uapi bitsperlong.h for arm64, riscv and loongarch")
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 2023-08-17 14:51:20 +02:00
Linus Torvalds
b4f63b0f2d perf tools fixes for v6.5: 3rd batch 
- Revert a patch that unconditionally resolved addresses to inlines in
   callchains, something that was done before when DWARF mode was asked
   for, but could as well be done when just frame pointers (the default)
   was selected. This enriches the callchains with inlines but the way to
   resolve it is gross right now, relying on addr2line, and even if we come
   up with an efficient way of processing all the associated DWARF info for
   a big file as vmlinux is, this has to be something people opt-in, as it
   will still result in overheads, so revert it until we get this done in a
   saner way.
 
 - Update the x86 msr-index.h header with the kernel original, no change
   in tooling output, just addresses a tools/perf build warning.
 
 - Resolve a regression where special "tool events", such as
   "duration_time" were being presented for all CPUs, when it only makes
   sense to show it for the workload, that is, just once.
 
 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCZNP/OAAKCRCyPKLppCJ+
 J7cGAQDgNpsAqGk+/Xkk7lPcp8aJ7q+5oaxv8iaGhdblq7V52gD+L2t8sNPQYWE3
 sy2QQ+9tsZiONfpdxknsduxoyfE+Vgs=
 =CRYB
 -----END PGP SIGNATURE-----

Merge tag 'perf-tools-fixes-for-v6.5-3-2023-08-09' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Revert a patch that unconditionally resolved addresses to inlines in
   callchains, something that was done before when DWARF mode was asked
   for, but could as well be done when just frame pointers (the default)
   was selected.

   This enriches the callchains with inlines but the way to resolve it
   is gross right now, relying on addr2line, and even if we come up with
   an efficient way of processing all the associated DWARF info for a
   big file as vmlinux is, this has to be something people opt-in, as it
   will still result in overheads, so revert it until we get this done
   in a saner way.

 - Update the x86 msr-index.h header with the kernel original, no change
   in tooling output, just addresses a tools/perf build warning.

  - Resolve a regression where special "tool events", such as
    "duration_time" were being presented for all CPUs, when it only
    makes sense to show it for the workload, that is, just once.

* tag 'perf-tools-fixes-for-v6.5-3-2023-08-09' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf stat: Don't display zero tool counts
  tools arch x86: Sync the msr-index.h copy with the kernel sources
  Revert "perf report: Append inlines to non-DWARF callchains"
 2023-08-09 21:06:14 -07:00
Arnaldo Carvalho de Melo
8cdd4aeff2 tools arch x86: Sync the msr-index.h copy with the kernel sources 
To pick up the changes from these csets:

  522b1d69219d8f08 ("x86/cpu/amd: Add a Zenbleed fix")

That cause no changes to tooling:

  $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > before
  $ cp arch/x86/include/asm/msr-index.h tools/arch/x86/include/asm/msr-index.h
  $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > after
  $ diff -u before after
  $

Just silences this perf build warning:

  Warning: Kernel ABI header differences:
    diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/ZND17H7BI4ariERn@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 2023-08-08 10:52:32 -03:00
Linus Torvalds
138bcddb86 Add a mitigation for the speculative RAS (Return Address Stack) overflow 
vulnerability on AMD processors. In short, this is yet another issue
 where userspace poisons a microarchitectural structure which can then be
 used to leak privileged information through a side channel.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmTQs1gACgkQEsHwGGHe
 VUo1UA/8C34PwJveZDcerdkaxSF+WKx7AjOI/L2ws1qn9YVFA3ItFMgVuFTrlY6c
 1eYKYB3FS9fVN3KzGOXGyhho6seHqfY0+8cyYupR+PVLn9rSy7GqHaIMr37FdQ2z
 yb9xu26v+gsvuPEApazS6MxijYS98u71rHhmg97qsHCnUiMJ01+TaGucntukNJv8
 FfwjZJvgeUiBPQ/6IeA/O0413tPPJ9weawPyW+sV1w7NlXjaUVkNXwiq/Xxbt9uI
 sWwMBjFHpSnhBRaDK8W5Blee/ZfsS6qhJ4jyEKUlGtsElMnZLPHbnrbpxxqA9gyE
 K+3ZhoHf/W1hhvcZcALNoUHLx0CvVekn0o41urAhPfUutLIiwLQWVbApmuW80fgC
 DhPedEFu7Wp6Okj5+Bqi/XOsOOWN2WRDSzdAq10o1C+e+fzmkr6y4E6gskfz1zXU
 ssD9S4+uAJ5bccS5lck4zLffsaA03nAYTlvl1KRP4pOz5G9ln6eyO20ar1WwfGAV
 o5ZsTJVGQMyVA49QFkksj+kOI3chkmDswPYyGn2y8OfqYXU4Ip4eN+VkjorIAo10
 zIec3Z0bCGZ9UUMylUmdtH3KAm8q0wVNoFrUkMEmO8j6nn7ew2BhwLMn4uu+nOnw
 lX2AG6PNhRLVDVaNgDsWMwejaDsitQPoWRuCIAZ0kQhbeYuwfpM=
 =73JY
 -----END PGP SIGNATURE-----

Merge tag 'x86_bugs_srso' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86/srso fixes from Borislav Petkov:
 "Add a mitigation for the speculative RAS (Return Address Stack)
  overflow vulnerability on AMD processors.

  In short, this is yet another issue where userspace poisons a
  microarchitectural structure which can then be used to leak privileged
  information through a side channel"

* tag 'x86_bugs_srso' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/srso: Tie SBPB bit setting to microcode patch detection
  x86/srso: Add a forgotten NOENDBR annotation
  x86/srso: Fix return thunks in generated code
  x86/srso: Add IBPB on VMEXIT
  x86/srso: Add IBPB
  x86/srso: Add SRSO_NO support
  x86/srso: Add IBPB_BRTYPE support
  x86/srso: Add a Speculative RAS Overflow mitigation
  x86/bugs: Increase the x86 bugs vector size to two u32s
 2023-08-07 16:35:44 -07:00
Xin Li
6e3edb0fb5 tools: Get rid of IRQ_MOVE_CLEANUP_VECTOR from tools 
IRQ_MOVE_CLEANUP_VECTOR is not longer in use. Remove the last traces.

Signed-off-by: Xin Li <xin3.li@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230621171248.6805-4-xin3.li@intel.com
 2023-08-06 14:15:10 +02:00
Alexey Kardashevskiy
d1f85fbe83 KVM: SEV: Enable data breakpoints in SEV-ES 
Add support for "DebugSwap for SEV-ES guests", which provides support
for swapping DR[0-3] and DR[0-3]_ADDR_MASK on VMRUN and VMEXIT, i.e.
allows KVM to expose debug capabilities to SEV-ES guests. Without
DebugSwap support, the CPU doesn't save/load most _guest_ debug
registers (except DR6/7), and KVM cannot manually context switch guest
DRs due the VMSA being encrypted.

Enable DebugSwap if and only if the CPU also supports NoNestedDataBp,
which causes the CPU to ignore nested #DBs, i.e. #DBs that occur when
vectoring a #DB.  Without NoNestedDataBp, a malicious guest can DoS
the host by putting the CPU into an infinite loop of vectoring #DBs
(see https://bugzilla.redhat.com/show_bug.cgi?id=1278496)

Set the features bit in sev_es_sync_vmsa() which is the last point
when VMSA is not encrypted yet as sev_(es_)init_vmcb() (where the most
init happens) is called not only when VCPU is initialised but also on
intrahost migration when VMSA is encrypted.

Eliminate DR7 intercepts as KVM can't modify guest DR7, and intercepting
DR7 would completely defeat the purpose of enabling DebugSwap.

Make X86_FEATURE_DEBUG_SWAP appear in /proc/cpuinfo (by not adding "") to
let the operator know if the VM can debug.

Signed-off-by: Alexey Kardashevskiy <aik@amd.com>
Link: https://lore.kernel.org/r/20230615063757.3039121-7-aik@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
 2023-07-28 16:12:56 -07:00
Borislav Petkov (AMD)
0e52740ffd x86/bugs: Increase the x86 bugs vector size to two u32s 
There was never a doubt in my mind that they would not fit into a single
u32 eventually.

Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
 2023-07-18 09:35:38 +02:00
Andrei Vagin
7d5cb68af6 perf/benchmark: add a new benchmark for seccom_unotify 
The benchmark is similar to the pipe benchmark. It creates two processes,
one is calling syscalls, and another process is handling them via seccomp
user notifications. It measures the time required to run a specified number
of interations.

 $ ./perf bench sched  seccomp-notify --sync-mode --loop 1000000
 # Running 'sched/seccomp-notify' benchmark:
 # Executed 1000000 system calls

     Total time: 2.769 [sec]

       2.769629 usecs/op
         361059 ops/sec

 $ ./perf bench sched  seccomp-notify
 # Running 'sched/seccomp-notify' benchmark:
 # Executed 1000000 system calls

     Total time: 8.571 [sec]

       8.571119 usecs/op
         116670 ops/sec

Signed-off-by: Andrei Vagin <avagin@google.com>
Acked-by: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230308073201.3102738-7-avagin@google.com
Link: https://lore.kernel.org/r/20230630051953.454638-1-avagin@gmail.com
[kees: Added PRIu64 format string]
Signed-off-by: Kees Cook <keescook@chromium.org>
 2023-07-17 16:08:08 -07:00
Arnaldo Carvalho de Melo
963293ff05 tools headers arm64: Sync arm64's cputype.h with the kernel sources 
To get the changes in:

  e910baa9c1efdf76 ("KVM: arm64: vgic: Add Apple M2 PRO/MAX cpus to the list of broken SEIS implementations")

That makes this perf source code to be rebuilt:

  CC      /tmp/build/perf-tools/util/arm-spe.o

The changes in the above patch don't affect things that are used in
arm-spe.c (things like MIDR_NEOVERSE_N1, etc). Unsure if Apple M2 has
SPE (Statistical Profiling Extension) :-)

That addresses this perf build warning:

  Warning: Kernel ABI header differences:
    diff -u tools/arch/arm64/include/asm/cputype.h arch/arm64/include/asm/cputype.h

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ali Saidi <alisaidi@amazon.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 2023-07-14 10:36:16 -03:00
Linus Torvalds
7b82e90411 asm-generic updates for 6.5 
These are cleanups for architecture specific header files:
 
  - the comments in include/linux/syscalls.h have gone out of sync
    and are really pointless, so these get removed
 
  - The asm/bitsperlong.h header no longer needs to be architecture
    specific on modern compilers, so use a generic version for newer
    architectures that use new enough userspace compilers
 
  - A cleanup for virt_to_pfn/virt_to_bus to have proper type
    checking, forcing the use of pointers
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmSl138ACgkQYKtH/8kJ
 UieqWxAA2WjNVfyuieYckglOVE0PZPs2fzCwyzTY5iUTH3gE5cBFWJDWcg2EnouG
 v3X3htEQcowYWaCF9+rypQXaGiSx4WXi2Bjxnz3D/BcreqWPI4eSQ0fpGG5SURTY
 2zYF72GTt4JGR++l+7/R9MZwPbwYDT9BsD5tkel8PxnyVLM6/c5xFvbjzRSKFE8x
 SMN1jGZ62ITLNf/8coAOEPNxBYtDT6yQyu7P2sx5cd65LAQq9yLKjFklnBBovgWT
 OoCIZAdGkhcNwOh1LjyHcdNdpfNJGceKyqKPqty07IhCQuF2jxiyFYFzuBbeyQfE
 S0itN8o/MIfUmxaQl3e8dPAVb1RlNVr1zfQ6y4tUtWNdkNL2WwSnSQSRHrBfHxCQ
 QCF++PMeFcLhGwMYtqdNJ7XGLQ0PsjD74pRf0vo+vjmqDk2BJsJBP57VU+8MJn5r
 SoxqnJ0WxLvm1TfrNKusV7zMNWquc2duJDW40zsOssP4itjYELSI6qa56qmzlqmX
 zKmRx6mxAlx9RRK8FHXFYHbz3p93vv8z9vTOZV3AjIjjED960CLknUAwCC8FoJyz
 9b5wyMXsLQHQjGt8luAvPc6OiU0EiU9a4SPK+feWcv27serFvnjJlRTS/yG2Z3zd
 BYsUgsXHypsdoud+aE7MeCy7fE8n3mhoyMQQRBkOMFJ7RsG6wAE=
 =S/he
 -----END PGP SIGNATURE-----

Merge tag 'asm-generic-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic

Pull asm-generic updates from Arnd Bergmann:
 "These are cleanups for architecture specific header files:

   - the comments in include/linux/syscalls.h have gone out of sync and
     are really pointless, so these get removed

   - The asm/bitsperlong.h header no longer needs to be architecture
     specific on modern compilers, so use a generic version for newer
     architectures that use new enough userspace compilers

   - A cleanup for virt_to_pfn/virt_to_bus to have proper type checking,
     forcing the use of pointers"

* tag 'asm-generic-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  syscalls: Remove file path comments from headers
  tools arch: Remove uapi bitsperlong.h of hexagon and microblaze
  asm-generic: Unify uapi bitsperlong.h for arm64, riscv and loongarch
  m68k/mm: Make pfn accessors static inlines
  arm64: memory: Make virt_to_pfn() a static inline
  ARM: mm: Make virt_to_pfn() a static inline
  asm-generic/page.h: Make pfn accessors static inlines
  xen/netback: Pass (void *) to virt_to_page()
  netfs: Pass a pointer to virt_to_page()
  cifs: Pass a pointer to virt_to_page() in cifsglob
  cifs: Pass a pointer to virt_to_page()
  riscv: mm: init: Pass a pointer to virt_to_page()
  ARC: init: Pass a pointer to virt_to_pfn() in init
  m68k: Pass a pointer to virt_to_pfn() virt_to_page()
  fs/proc/kcore.c: Pass a pointer to virt_addr_valid()
 2023-07-06 10:06:04 -07:00
Linus Torvalds
4baa098a14 - Remove the local symbols prefix of the get/put_user() exception 
handling symbols so that tools do not get confused by the presence of
   code belonging to the wrong symbol/not belonging to any symbol
 
 - Improve csum_partial()'s performance
 
 - Some improvements to the kcpuid tool
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmSawNoACgkQEsHwGGHe
 VUppXw//YezVoWUUUeTedZl8nRbotwXUlATjsIGcRGe2rZQ/7Ud/NUagWiLmKcpy
 fAEt+Rd0MbukCNPmTjcw04NN9djs2avVXJS3CCsGNDv/Q6AsBpMcOD4dESxbWIgh
 NpkNvO3bKRKxtaoJukmxiiIBlMFzXXtKg/fgzB8FeYZDhGMfS7wBlcDeJIdmWWxO
 T5hykFoc/47e8SPG+K/VLT8hoQCg4KPpi3aSN6n+eq8nnlosABr95JKvgqeq1mXf
 UPdITYzKHDiny0ZqL2nqsx1MGh24CLc3QCxi5qMDE27NVFokRdfyCiK3DVZvgrNo
 IA5BsiKJ0Ddeo2F1Weu+rBI7Hhf+OBZlw7WmWpqQ3rEbeEJ4L1iWeeHwrBNzyuZq
 ftb7OScukusaGAMamhhnErR2GwdP3SBDnnUtsue3qqPK1acYPdFfCJCqXvYsCczQ
 Pn6eKE2Vlp/3febce7QtZtcz7qlv60UZvj3OpYbECIKcD1/8BWEidquSgPASxs9e
 WH+MvDlV/tgwzLVAG0Zp5x7DE/VzDPIKtMMRzgx1clSSPyRwzW0jhp+C4/xPsDCT
 2lLHZu/ay7O2A1kiH6m0/ULAm/gUzRNsKCNRlP/HVVXl7+U6lZeZR3D14QOPl8n8
 F1W/seOCLxnxx8dVF/hHmirDQuwSjF9vRewmWvvOUgzmYBid8j0=
 =6U2J
 -----END PGP SIGNATURE-----

Merge tag 'x86_misc_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull misc x86 updates from Borislav Petkov:

 - Remove the local symbols prefix of the get/put_user() exception
   handling symbols so that tools do not get confused by the presence of
   code belonging to the wrong symbol/not belonging to any symbol

 - Improve csum_partial()'s performance

 - Some improvements to the kcpuid tool

* tag 'x86_misc_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/lib: Make get/put_user() exception handling a visible symbol
  x86/csum: Fix clang -Wuninitialized in csum_partial()
  x86/csum: Improve performance of `csum_partial`
  tools/x86/kcpuid: Add .gitignore
  tools/x86/kcpuid: Dump the correct CPUID function in error
 2023-06-27 12:25:42 -07:00
Linus Torvalds
8c69e7afe9 - Up until now the Fast Short Rep Mov optimizations implied the presence 
of the ERMS CPUID flag. AMD decoupled them with a BIOS setting so decouple
   that dependency in the kernel code too
 
 - Teach the alternatives machinery to handle relocations
 
 - Make debug_alternative accept flags in order to see only that set of
   patching done one is interested in
 
 - Other fixes, cleanups and optimizations to the patching code
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmSZi2AACgkQEsHwGGHe
 VUqhGw/9EC/m5HTFBlCy9PS5Qy6pPLzmHR5Tuy4meqlnB1gN+5wzfxdYEwHm46hH
 SR6WqR12yVaCMIzh66y8nTJyMbIykaBbfFJb3WesdDrBIYUZ9f+7O+Xd0JS6Jykd
 2HBHOyaVS1/W75+y6w9JhTExBH5xieCpJVIYyAvifbn/pB8XmuTTwJ1Z3EJ8DzkK
 AN16i46bUiKNBdTYZUMhtKL4vHVfqLYMskgWe6IG7DmRLOwikR0uRVhuVqP/bmUj
 U128cUacGJT2AYbZarTAKmOa42nDj3TpJqRp1qit3y6Cun4vxKH+1A91UPd7IHTa
 M5H1bNSgfXMm8rU+JgfvXKqrCTckGn2OqlCkJfPV3RBeP9IcQBBF0vE3dnM/X2We
 dwbXeDfJvc+1s4/M41MOhyahTUbW+4iRK5UCZEt1mprTbtzHTlN7RROo7QLpFsWx
 T0Jqvsd1raAutPTgTjU7ToQwDpSQNnn4Y/KoEdpvOCXR8wU7Wo5/+Qa4tEkIY3W6
 mUFpJcgFC9QEKLuaNAofPIhMuZ/vzRVtpK7wbLn4KR5JZA8AxznenMFVg8YPWRFI
 4oga0kMFJ7t6z/CXHtrxFaLQ9e7WAUSRU6gPiz8As1F/K9N0JWMUfjuTJcgjUsF8
 bwdCNinwG8y3rrPUCrqbO5N766ZkLYd6NksKlmIyUvtCcS0ksbg=
 =mH38
 -----END PGP SIGNATURE-----

Merge tag 'x86_alternatives_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 instruction alternatives updates from Borislav Petkov:

 - Up until now the Fast Short Rep Mov optimizations implied the
   presence of the ERMS CPUID flag. AMD decoupled them with a BIOS
   setting so decouple that dependency in the kernel code too

 - Teach the alternatives machinery to handle relocations

 - Make debug_alternative accept flags in order to see only that set of
   patching done one is interested in

 - Other fixes, cleanups and optimizations to the patching code

* tag 'x86_alternatives_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/alternative: PAUSE is not a NOP
  x86/alternatives: Add cond_resched() to text_poke_bp_batch()
  x86/nospec: Shorten RESET_CALL_DEPTH
  x86/alternatives: Add longer 64-bit NOPs
  x86/alternatives: Fix section mismatch warnings
  x86/alternative: Optimize returns patching
  x86/alternative: Complicate optimize_nops() some more
  x86/alternative: Rewrite optimize_nops() some
  x86/lib/memmove: Decouple ERMS from FSRM
  x86/alternative: Support relocations in alternatives
  x86/alternative: Make debug-alternative selective
 2023-06-26 15:14:55 -07:00
Tiezhu Yang
0526b56cbc tools arch: Remove uapi bitsperlong.h of hexagon and microblaze 
After the following two commits:

  commit 872e24d5c698 ("hexagon: remove asm/bitsperlong.h")
  commit 83f0124ad81e ("microblaze: remove asm-generic wrapper headers")

the arch-specific headers of hexagon and microblaze have been removed,
the tools arch uapi headers are useless too, remove them.

Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 2023-06-22 17:04:37 +02:00
Tiezhu Yang
8386f58f8d asm-generic: Unify uapi bitsperlong.h for arm64, riscv and loongarch 
Now we specify the minimal version of GCC as 5.1 and Clang/LLVM as 11.0.0
in Documentation/process/changes.rst, __CHAR_BIT__ and __SIZEOF_LONG__ are
usable, it is probably fine to unify the definition of __BITS_PER_LONG as
(__CHAR_BIT__ * __SIZEOF_LONG__) in asm-generic uapi bitsperlong.h.

In order to keep safe and avoid regression, only unify uapi bitsperlong.h
for some archs such as arm64, riscv and loongarch which are using newer
toolchains that have the definitions of __CHAR_BIT__ and __SIZEOF_LONG__.

Suggested-by: Xi Ruoyao <xry111@xry111.site>
Link: https://lore.kernel.org/all/d3e255e4746de44c9903c4433616d44ffcf18d1b.camel@xry111.site/
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/linux-arch/a3a4f48a-07d4-4ed9-bc53-5d383428bdd2@app.fastmail.com/
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 2023-06-22 17:04:36 +02:00
Peter Zijlstra
df25edbac3 x86/alternatives: Add longer 64-bit NOPs 
By adding support for longer NOPs there are a few more alternatives
that can turn into a single instruction.

Add up to NOP11, the same limit where GNU as .nops also stops
generating longer nops. This is because a number of uarchs have severe
decode penalties for more than 3 prefixes.

  [ bp: Sync up with the version in tools/ while at it. ]

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230515093020.661756940@infradead.org
 2023-05-31 10:21:21 +02:00
Tiezhu Yang
4e111f0cf0 perf bench syscall: Fix __NR_execve undeclared build error 
The __NR_execve definition for i386 was deleted by mistake
in the commit ece7f7c0507c ("perf bench syscall: Add fork
syscall benchmark"), add it to fix the build error on i386.

Fixes: ece7f7c0507cc147 ("perf bench syscall: Add fork syscall benchmark")
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: loongson-kernel@lists.loongnix.cn
Closes: https://lore.kernel.org/all/CA+G9fYvgBR1iB0CorM8OC4AM_w_tFzyQKHc+rF6qPzJL=TbfDQ@mail.gmail.com/
Link: https://lore.kernel.org/r/1684480657-2375-1-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 2023-05-19 12:08:00 -03:00
Arnaldo Carvalho de Melo
1b5f159ce8 tools headers disabled-features: Sync with the kernel sources 
To pick the changes from:

  e0bddc19ba9578bc ("x86/mm: Reduce untagged_addr() overhead for systems without LAM")

This only causes these perf files to be rebuilt:

  CC       /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o
  CC       /tmp/build/perf/bench/mem-memset-x86-64-asm.o

And addresses this perf build warning:

  Warning: Kernel ABI header at 'tools/arch/x86/include/asm/disabled-features.h' differs from latest version at 'arch/x86/include/asm/disabled-features.h'
  diff -u tools/arch/x86/include/asm/disabled-features.h arch/x86/include/asm/disabled-features.h

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/ZGTpdlzrlRjjnY6K@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 2023-05-17 11:49:47 -03:00
Arnaldo Carvalho de Melo
29719e3198 tools headers UAPI: Sync arch prctl headers with the kernel sources 
To pick the changes in this cset:

  a03c376ebaf38394 ("x86/arch_prctl: Add AMX feature numbers as ABI constants")
  23e5d9ec2bab53c4 ("x86/mm/iommu/sva: Make LAM and SVA mutually exclusive")
  2f8794bd087e7958 ("x86/mm: Provide arch_prctl() interface for LAM")

This picks these new prctls in a third range, that was also added to the
tools/perf/trace/beauty/arch_prctl.c beautifier.

  $ tools/perf/trace/beauty/x86_arch_prctl.sh > /tmp/before
  $ cp arch/x86/include/uapi/asm/prctl.h tools/arch/x86/include/uapi/asm/prctl.h
  $ tools/perf/trace/beauty/x86_arch_prctl.sh > /tmp/after
  $ diff -u /tmp/before /tmp/after
  @@ -20,3 +20,11 @@
   	[0x2003 - 0x2001]= "MAP_VDSO_64",
   };

  +#define x86_arch_prctl_codes_3_offset 0x4001
  +static const char *x86_arch_prctl_codes_3[] = {
  +	[0x4001 - 0x4001]= "GET_UNTAG_MASK",
  +	[0x4002 - 0x4001]= "ENABLE_TAGGED_ADDR",
  +	[0x4003 - 0x4001]= "GET_MAX_TAG_BITS",
  +	[0x4004 - 0x4001]= "FORCE_TAGGED_SVA",
  +};
  +
  $

With this 'perf trace' can translate those numbers into strings and use
the strings in filter expressions:

  # perf trace -e prctl
       0.000 ( 0.011 ms): DOM Worker/3722622 prctl(option: SET_NAME, arg2: 0x7f9c014b7df5)     = 0
       0.032 ( 0.002 ms): DOM Worker/3722622 prctl(option: SET_NAME, arg2: 0x7f9bb6b51580)     = 0
       5.452 ( 0.003 ms): StreamT~ns #30/3722623 prctl(option: SET_NAME, arg2: 0x7f9bdbdfeb70) = 0
       5.468 ( 0.002 ms): StreamT~ns #30/3722623 prctl(option: SET_NAME, arg2: 0x7f9bdbdfea70) = 0
      24.494 ( 0.009 ms): IndexedDB #556/3722624 prctl(option: SET_NAME, arg2: 0x7f562a32ae28) = 0
      24.540 ( 0.002 ms): IndexedDB #556/3722624 prctl(option: SET_NAME, arg2: 0x7f563c6d4b30) = 0
     670.281 ( 0.008 ms): systemd-userwo/3722339 prctl(option: SET_NAME, arg2: 0x564be30805c8) = 0
     670.293 ( 0.002 ms): systemd-userwo/3722339 prctl(option: SET_NAME, arg2: 0x564be30800f0) = 0
  ^C#

This addresses this perf build warning:

  Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/prctl.h' differs from latest version at 'arch/x86/include/uapi/asm/prctl.h'
  diff -u tools/arch/x86/include/uapi/asm/prctl.h arch/x86/include/uapi/asm/prctl.h

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Chang S. Bae <chang.seok.bae@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/ZGTjNPpD3FOWfetM@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 2023-05-17 11:23:43 -03:00
Arnaldo Carvalho de Melo
7f02ce62a6 tools headers: Update the copy of x86's mem{cpy,set}_64.S used in 'perf bench' 
This is to get the changes from:

  68674f94ffc9dddc ("x86: don't use REP_GOOD or ERMS for small memory copies")
  20f3337d350c4e1b ("x86: don't use REP_GOOD or ERMS for small memory clearing")

This also make the 'perf bench mem' files stop referring to the erms
versions that gone away with the above patches.

That addresses these perf tools build warning:

  Warning: Kernel ABI header at 'tools/arch/x86/lib/memcpy_64.S' differs from latest version at 'arch/x86/lib/memcpy_64.S'
  diff -u tools/arch/x86/lib/memcpy_64.S arch/x86/lib/memcpy_64.S
  Warning: Kernel ABI header at 'tools/arch/x86/lib/memset_64.S' differs from latest version at 'arch/x86/lib/memset_64.S'
  diff -u tools/arch/x86/lib/memset_64.S arch/x86/lib/memset_64.S

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 2023-05-17 10:42:19 -03:00
Arnaldo Carvalho de Melo
9bc83d6e38 tools headers x86 cpufeatures: Sync with the kernel sources 
To pick the changes from:

  3d8f61bf8bcd69bc ("x86: KVM: Add common feature flag for AMD's PSFD")
  3763bf58029f3459 ("x86/cpufeatures: Redefine synthetic virtual NMI bit as AMD's "real" vNMI")
  6449dcb0cac73821 ("x86: CPUID and CR3/CR4 flags for Linear Address Masking")
  be8de49bea505e77 ("x86/speculation: Identify processors vulnerable to SMT RSB predictions")
  e7862eda309ecfcc ("x86/cpu: Support AMD Automatic IBRS")
  faabfcb194a8d068 ("x86/cpu, kvm: Add the SMM_CTL MSR not present feature")
  5b909d4ae59aedc7 ("x86/cpu, kvm: Add the Null Selector Clears Base feature")
  84168ae786f8a15a ("x86/cpu, kvm: Move X86_FEATURE_LFENCE_RDTSC to its native leaf")
  a9dc9ec5a1fafc3d ("x86/cpu, kvm: Add the NO_NESTED_DATA_BP feature")
  f8df91e73a6827a4 ("x86/cpufeatures: Add macros for Intel's new fast rep string features")
  78335aac6156eada ("x86/cpufeatures: Add Bandwidth Monitoring Event Configuration feature flag")
  f334f723a63cfc25 ("x86/cpufeatures: Add Slow Memory Bandwidth Allocation feature flag")
  a018d2e3d4b1abc4 ("x86/cpufeatures: Add Architectural PerfMon Extension bit")

This causes these perf files to be rebuilt and brings some X86_FEATURE
that will be used when updating the copies of
tools/arch/x86/lib/mem{cpy,set}_64.S with the kernel sources:

  CC       /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o
  CC       /tmp/build/perf/bench/mem-memset-x86-64-asm.o

And addresses this perf build warning:

  Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h'
  diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h

Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Jim Mattson <jmattson@google.com>
Cc: Babu Moger <babu.moger@amd.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/lkml/ZGTTw642q8mWgv2Y@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 2023-05-17 10:39:40 -03:00
Yanteng Si
34e82891d9 tools arch x86: Sync the msr-index.h copy with the kernel sources 
Picking the changes from:

  c68e3d473988b9af ("x86/include/asm/msr-index.h: Add IFS Array test bits")

Silencing these perf build warnings:

  Warning: Kernel ABI header at 'tools/arch/x86/include/asm/msr-index.h' differs from latest version at 'arch/x86/include/asm/msr-index.h'
  diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h

Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: loongson-kernel@lists.loongnix.cn
Link: https://lore.kernel.org/r/05778ab3c168c8030f6b20e60375dc803f0cd300.1683712945.git.siyanteng@loongson.cn
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 2023-05-10 14:19:20 -03:00
Yanteng Si
705049ca4f tools headers kvm: Sync uapi/{asm/linux} kvm.h headers with the kernel sources 
Picking the changes from:

  e65733b5c59a1ea2 ("KVM: x86: Redefine 'longmode' as a flag for KVM_EXIT_HYPERCALL")
  30ec7997d175cd68 ("KVM: arm64: timers: Allow userspace to set the global counter offset")
  821d935c87bc9525 ("KVM: arm64: Introduce support for userspace SMCCC filtering")
  81dc9504a7006b48 ("KVM: arm64: nv: timers: Support hyp timer emulation")
  a8308b3fc9494953 ("KVM: arm64: Refactor hvc filtering to support different actions")
  0e5c9a9d6548e9b1 ("KVM: arm64: Expose SMC/HVC width to userspace")

Silencing these perf build warnings:

 Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h'
 diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
 Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/kvm.h' differs from latest version at 'arch/x86/include/uapi/asm/kvm.h'
 diff -u tools/arch/x86/include/uapi/asm/kvm.h arch/x86/include/uapi/asm/kvm.h
 Warning: Kernel ABI header at 'tools/arch/arm64/include/uapi/asm/kvm.h' differs from latest version at 'arch/arm64/include/uapi/asm/kvm.h'
 diff -u tools/arch/arm64/include/uapi/asm/kvm.h arch/arm64/include/uapi/asm/kvm.h

Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: loongson-kernel@lists.loongnix.cn
Link: https://lore.kernel.org/r/ac5adb58411d23b3360d436a65038fefe91c32a8.1683712945.git.siyanteng@loongson.cn
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 2023-05-10 14:19:20 -03:00
Rong Tao
b2ad431f64 tools/x86/kcpuid: Add .gitignore 
Ignore kcpuid ELF file.

  [ bp: Drop the '/' before the name. ]

Signed-off-by: Rong Tao <rtoax@foxmail.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/tencent_F0318BF0724705EC156C341E11DE4040E805@qq.com
 2023-05-08 15:53:50 +02:00
Borislav Petkov (AMD)
0150d1bfbe tools/x86/kcpuid: Dump the correct CPUID function in error 
The tool uses the 16 least significant bits of the CPUID leaf as an
index into its array of CPUID function field descriptions.

However, when that index is non-existent, it uses the same, truncated
index to report it, which is wrong:

$ kcpuid -l 0x80000034
  ERR: invalid input index (0x34)

Use the original index number in the error message.

Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230426094107.27348-1-bp@alien8.de
 2023-05-08 15:50:27 +02:00
Linus Torvalds
f085df1be6 Disable building BPF based features by default for v6.4. 
We need to better polish building with BPF skels, so revert back to
 making it an experimental feature that has to be explicitely enabled
 using BUILD_BPF_SKEL=1.
 
 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCZFbCXwAKCRCyPKLppCJ+
 J7cHAP97erKY4hBXArjpfzcvpFmboh/oqhbTLntyIpS6TEnOyQEAyervAPGIjQYC
 DCo4foyXmOWn3dhNtK9M+YiRl3o2SgQ=
 =7G78
 -----END PGP SIGNATURE-----

Merge tag 'perf-tools-for-v6.4-3-2023-05-06' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tool updates from Arnaldo Carvalho de Melo:
 "Third version of perf tool updates, with the build problems with with
  using a 'vmlinux.h' generated from the main build fixed, and the bpf
  skeleton build disabled by default.

  Build:

   - Require libtraceevent to build, one can disable it using
     NO_LIBTRACEEVENT=1.

     It is required for tools like 'perf sched', 'perf kvm', 'perf
     trace', etc.

     libtraceevent is available in most distros so installing
     'libtraceevent-devel' should be a one-time event to continue
     building perf as usual.

     Using NO_LIBTRACEEVENT=1 produces tooling that is functional and
     sufficient for lots of users not interested in those libtraceevent
     dependent features.

   - Allow Python support in 'perf script' when libtraceevent isn't
     linked, as not all features requires it, for instance Intel PT does
     not use tracepoints.

   - Error if the python interpreter needed for jevents to work isn't
     available and NO_JEVENTS=1 isn't set, preventing a build without
     support for JSON vendor events, which is a rare but possible
     condition. The two check error messages:

        $(error ERROR: No python interpreter needed for jevents generation. Install python or build with NO_JEVENTS=1.)
        $(error ERROR: Python interpreter needed for jevents generation too old (older than 3.6). Install a newer python or build with NO_JEVENTS=1.)

   - Make libbpf 1.0 the minimum required when building with out of
     tree, distro provided libbpf.

   - Use libsdtc++'s and LLVM's libcxx's __cxa_demangle, a portable C++
     demangler, add 'perf test' entry for it.

   - Make binutils libraries opt in, as distros disable building with it
     due to licensing, they were used for C++ demangling, for instance.

   - Switch libpfm4 to opt-out rather than opt-in, if libpfm-devel (or
     equivalent) isn't installed, we'll just have a build warning:

       Makefile.config:1144: libpfm4 not found, disables libpfm4 support. Please install libpfm4-dev

   - Add a feature test for scandirat(), that is not implemented so far
     in musl and uclibc, disabling features that need it, such as
     scanning for tracepoints in /sys/kernel/tracing/events.

  perf BPF filters:

   - New feature where BPF can be used to filter samples, for instance:

      $ sudo ./perf record -e cycles --filter 'period > 1000' true
      $ sudo ./perf script
           perf-exec 2273949 546850.708501:       5029 cycles:  ffffffff826f9e25 finish_wait+0x5 ([kernel.kallsyms])
           perf-exec 2273949 546850.708508:      32409 cycles:  ffffffff826f9e25 finish_wait+0x5 ([kernel.kallsyms])
           perf-exec 2273949 546850.708526:     143369 cycles:  ffffffff82b4cdbf xas_start+0x5f ([kernel.kallsyms])
           perf-exec 2273949 546850.708600:     372650 cycles:  ffffffff8286b8f7 __pagevec_lru_add+0x117 ([kernel.kallsyms])
           perf-exec 2273949 546850.708791:     482953 cycles:  ffffffff829190de __mod_memcg_lruvec_state+0x4e ([kernel.kallsyms])
                true 2273949 546850.709036:     501985 cycles:  ffffffff828add7c tlb_gather_mmu+0x4c ([kernel.kallsyms])
                true 2273949 546850.709292:     503065 cycles:      7f2446d97c03 _dl_map_object_deps+0x973 (/usr/lib/x86_64-linux-gnu/ld-linux-x86-64.so.2)

   - In addition to 'period' (PERF_SAMPLE_PERIOD), the other
     PERF_SAMPLE_ can be used for filtering, and also some other sample
     accessible values, from tools/perf/Documentation/perf-record.txt:

        Essentially the BPF filter expression is:

        <term> <operator> <value> (("," | "||") <term> <operator> <value>)*

     The <term> can be one of:
        ip, id, tid, pid, cpu, time, addr, period, txn, weight, phys_addr,
        code_pgsz, data_pgsz, weight1, weight2, weight3, ins_lat, retire_lat,
        p_stage_cyc, mem_op, mem_lvl, mem_snoop, mem_remote, mem_lock,
        mem_dtlb, mem_blk, mem_hops

     The <operator> can be one of:
        ==, !=, >, >=, <, <=, &

     The <value> can be one of:
        <number> (for any term)
        na, load, store, pfetch, exec (for mem_op)
        l1, l2, l3, l4, cxl, io, any_cache, lfb, ram, pmem (for mem_lvl)
        na, none, hit, miss, hitm, fwd, peer (for mem_snoop)
        remote (for mem_remote)
        na, locked (for mem_locked)
        na, l1_hit, l1_miss, l2_hit, l2_miss, any_hit, any_miss, walk, fault (for mem_dtlb)
        na, by_data, by_addr (for mem_blk)
        hops0, hops1, hops2, hops3 (for mem_hops)

  perf lock contention:

   - Show lock type with address.

   - Track and show mmap_lock, siglock and per-cpu rq_lock with address.
     This is done for mmap_lock by following the current->mm pointer:

      $ sudo ./perf lock con -abl -- sleep 10
       contended   total wait     max wait     avg wait            address   symbol
       ...
           16344    312.30 ms      2.22 ms     19.11 us   ffff8cc702595640
           17686    310.08 ms      1.49 ms     17.53 us   ffff8cc7025952c0
               3     84.14 ms     45.79 ms     28.05 ms   ffff8cc78114c478   mmap_lock
            3557     76.80 ms     68.75 us     21.59 us   ffff8cc77ca3af58
               1     68.27 ms     68.27 ms     68.27 ms   ffff8cda745dfd70
               9     54.53 ms      7.96 ms      6.06 ms   ffff8cc7642a48b8   mmap_lock
           14629     44.01 ms     60.00 us      3.01 us   ffff8cc7625f9ca0
            3481     42.63 ms    140.71 us     12.24 us   ffffffff937906ac   vmap_area_lock
           16194     38.73 ms     42.15 us      2.39 us   ffff8cd397cbc560
              11     38.44 ms     10.39 ms      3.49 ms   ffff8ccd6d12fbb8   mmap_lock
               1      5.43 ms      5.43 ms      5.43 ms   ffff8cd70018f0d8
            1674      5.38 ms    422.93 us      3.21 us   ffffffff92e06080   tasklist_lock
             581      4.51 ms    130.68 us      7.75 us   ffff8cc9b1259058
               5      3.52 ms      1.27 ms    703.23 us   ffff8cc754510070
             112      3.47 ms     56.47 us     31.02 us   ffff8ccee38b3120
             381      3.31 ms     73.44 us      8.69 us   ffffffff93790690   purge_vmap_area_lock
             255      3.19 ms     36.35 us     12.49 us   ffff8d053ce30c80

   - Update default map size to 16384.

   - Allocate single letter option -M for --map-nr-entries, as it is
     proving being frequently used.

   - Fix struct rq lock access for older kernels with BPF's CO-RE
     (Compile once, run everywhere).

   - Fix problems found with MSAn.

  perf report/top:

   - Add inline information when using --call-graph=fp or lbr, as was
     already done to the --call-graph=dwarf callchain mode.

   - Improve the 'srcfile' sort key performance by really using an
     optimization introduced in 6.2 for the 'srcline' sort key that
     avoids calling addr2line for comparision with each sample.

  perf sched:

   - Make 'perf sched latency/map/replay' to use "sched:sched_waking"
     instead of "sched:sched_waking", consistent with 'perf record'
     since d566a9c2d482 ("perf sched: Prefer sched_waking event when it
     exists").

  perf ftrace:

   - Make system wide the default target for latency subcommand, run the
     following command then generate some network traffic and press
     control+C:

       # perf ftrace latency -T __kfree_skb
     ^C
         DURATION     |      COUNT | GRAPH                                          |
          0 - 1    us |         27 | #############                                  |
          1 - 2    us |         22 | ###########                                    |
          2 - 4    us |          8 | ####                                           |
          4 - 8    us |          5 | ##                                             |
          8 - 16   us |         24 | ############                                   |
         16 - 32   us |          2 | #                                              |
         32 - 64   us |          1 |                                                |
         64 - 128  us |          0 |                                                |
        128 - 256  us |          0 |                                                |
        256 - 512  us |          0 |                                                |
        512 - 1024 us |          0 |                                                |
          1 - 2    ms |          0 |                                                |
          2 - 4    ms |          0 |                                                |
          4 - 8    ms |          0 |                                                |
          8 - 16   ms |          0 |                                                |
         16 - 32   ms |          0 |                                                |
         32 - 64   ms |          0 |                                                |
         64 - 128  ms |          0 |                                                |
        128 - 256  ms |          0 |                                                |
        256 - 512  ms |          0 |                                                |
        512 - 1024 ms |          0 |                                                |
          1 - ...   s |          0 |                                                |
       #

  perf top:

   - Add --branch-history (LBR: Last Branch Record) option, just like
     already available for 'perf record'.

   - Fix segfault in thread__comm_len() where thread->comm was being
     used outside thread->comm_lock.

  perf annotate:

   - Allow configuring objdump and addr2line in ~/.perfconfig., so that
     you can use alternative binaries, such as llvm's.

  perf kvm:

   - Add TUI mode for 'perf kvm stat report'.

  Reference counting:

   - Add reference count checking infrastructure to check for use after
     free, done to the 'cpumap', 'namespaces', 'maps' and 'map' structs,
     more to come.

     To build with it use -DREFCNT_CHECKING=1 in the make command line
     to build tools/perf. Documented at:

       https://perf.wiki.kernel.org/index.php/Reference_Count_Checking

   - The above caught, for instance, fix, present in this series:

        - Fix maps use after put in 'perf test "Share thread maps"':

          'maps' is copied from leader, but the leader is put on line 79
          and then 'maps' is used to read the reference count below - so
          a use after put, with the put of maps happening within
          thread__put.

     Fixed by reversing the order of puts so that the leader is put
     last.

   - Also several fixes were made to places where reference counts were
     not being held.

   - Make this one of the tests in 'make -C tools/perf build-test' to
     regularly build test it and to make sure no direct access to the
     reference counted structs are made, doing that via accessors to
     check the validity of the struct pointer.

  ARM64:

   - Fix 'perf report' segfault when filtering coresight traces by
     sparse lists of CPUs.

   - Add support for 'simd' as a sort field for 'perf report', to show
     ARM's NEON SIMD's predicate flags: "partial" and "empty".

  arm64 vendor events:

   - Add N1 metrics.

  Intel vendor events:

   - Add graniterapids, grandridge and sierraforrest events.

   - Refresh events for: alderlake, aldernaken, broadwell, broadwellde,
     broadwellx, cascadelakx, haswell, haswellx, icelake, icelakex,
     jaketown, meteorlake, knightslanding, sandybridge, sapphirerapids,
     silvermont, skylake, tigerlake and westmereep-dp

   - Refresh metrics for alderlake-n, broadwell, broadwellde,
     broadwellx, haswell, haswellx, icelakex, ivybridge, ivytown and
     skylakex.

  perf stat:

   - Implement --topdown using JSON metrics.

   - Add TopdownL1 JSON metric as a default if present, but disable it
     for now for some Intel hybrid architectures, a series of patches
     addressing this is being reviewed and will be submitted for v6.5.

   - Use metrics for --smi-cost.

   - Update topdown documentation.

  Vendor events (JSON) infrastructure:

   - Add support for computing and printing metric threshold values. For
     instance, here is one found in thesapphirerapids json file:

       {
           "BriefDescription": "Percentage of cycles spent in System Management Interrupts.",
           "MetricExpr": "((msr@aperf@ - cycles) / msr@aperf@ if msr@smi@ > 0 else 0)",
           "MetricGroup": "smi",
           "MetricName": "smi_cycles",
           "MetricThreshold": "smi_cycles > 0.1",
           "ScaleUnit": "100%"
       },

   - Test parsing metric thresholds with the fake PMU in 'perf test
     pmu-events'.

   - Support for printing metric thresholds in 'perf list'.

   - Add --metric-no-threshold option to 'perf stat'.

   - Add rand (reverse and) and has_pmem (optane memory) support to
     metrics.

   - Sort list of input files to avoid depending on the order from
     readdir() helping in obtaining reproducible builds.

  S/390:

   - Add common metrics: - CPI (cycles per instruction), prbstate (ratio
     of instructions executed in problem state compared to total number
     of instructions), l1mp (Level one instruction and data cache misses
     per 100 instructions).

   - Add cache metrics for z13, z14, z15 and z16.

   - Add metric for TLB and cache.

  ARM:

   - Add raw decoding for SPE (Statistical Profiling Extension) v1.3 MTE
     (Memory Tagging Extension) and MOPS (Memory Operations) load/store.

  Intel PT hardware tracing:

   - Add event type names UINTR (User interrupt delivered) and UIRET
     (Exiting from user interrupt routine), documented in table 32-50
     "CFE Packet Type and Vector Fields Details" in the Intel Processor
     Trace chapter of The Intel SDM Volume 3 version 078.

   - Add support for new branch instructions ERETS and ERETU.

   - Fix CYC timestamps after standalone CBR

  ARM CoreSight hardware tracing:

   - Allow user to override timestamp and contextid settings.

   - Fix segfault in dso lookup.

   - Fix timeless decode mode detection.

   - Add separate decode paths for timeless and per-thread modes.

  auxtrace:

   - Fix address filter entire kernel size.

  Miscellaneous:

   - Fix use-after-free and unaligned bugs in the PLT handling routines.

   - Use zfree() to reduce chances of use after free.

   - Add missing 0x prefix for addresses printed in hexadecimal in 'perf
     probe'.

   - Suppress massive unsupported target platform errors in the unwind
     code.

   - Fix return incorrect build_id size in elf_read_build_id().

   - Fix 'perf scripts intel-pt-events.py' IPC output for Python 2 .

   - Add missing new parameter in kfree_skb tracepoint to the python
     scripts using it.

   - Add 'perf bench syscall fork' benchmark.

   - Add support for printing PERF_MEM_LVLNUM_UNC (Uncached access) in
     'perf mem'.

   - Fix wrong size expectation for perf test 'Setup struct
     perf_event_attr' caused by the patch adding
     perf_event_attr::config3.

   - Fix some spelling mistakes"

* tag 'perf-tools-for-v6.4-3-2023-05-06' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (365 commits)
  Revert "perf build: Make BUILD_BPF_SKEL default, rename to NO_BPF_SKEL"
  Revert "perf build: Warn for BPF skeletons if endian mismatches"
  perf metrics: Fix SEGV with --for-each-cgroup
  perf bpf skels: Stop using vmlinux.h generated from BTF, use subset of used structs + CO-RE
  perf stat: Separate bperf from bpf_profiler
  perf test record+probe_libc_inet_pton: Fix call chain match on x86_64
  perf test record+probe_libc_inet_pton: Fix call chain match on s390
  perf tracepoint: Fix memory leak in is_valid_tracepoint()
  perf cs-etm: Add fix for coresight trace for any range of CPUs
  perf build: Fix unescaped # in perf build-test
  perf unwind: Suppress massive unsupported target platform errors
  perf script: Add new parameter in kfree_skb tracepoint to the python scripts using it
  perf script: Print raw ip instead of binary offset for callchain
  perf symbols: Fix return incorrect build_id size in elf_read_build_id()
  perf list: Modify the warning message about scandirat(3)
  perf list: Fix memory leaks in print_tracepoint_events()
  perf lock contention: Rework offset calculation with BPF CO-RE
  perf lock contention: Fix struct rq lock access
  perf stat: Disable TopdownL1 on hybrid
  perf stat: Avoid SEGV on counter->name
  ...
 2023-05-07 11:32:18 -07:00
Linus Torvalds
611c9d8830 LoongArch changes for v6.4 
1, Better backtraces for humanization;
 2, Relay BCE exceptions to userland as SIGSEGV;
 3, Provide kernel fpu functions;
 4, Optimize memory ops (memset/memcpy/memmove);
 5, Optimize checksum and crc32(c) calculation;
 6, Add ARCH_HAS_FORTIFY_SOURCE selection;
 7, Add function error injection support;
 8, Add ftrace with direct call support;
 9, Add basic perf tools support.
 -----BEGIN PGP SIGNATURE-----
 
 iQJKBAABCAA0FiEEzOlt8mkP+tbeiYy5AoYrw/LiJnoFAmRQlUsWHGNoZW5odWFj
 YWlAa2VybmVsLm9yZwAKCRAChivD8uImekCTD/9fc2U+FIXhJOWV5yK9TCjJTRnK
 ASvk0JMYIDA60+fnof3C85tDu9Py9M5Mvt/Ec5pBaHErn16irq85AdD74/OmyCc2
 V4pRFHbYLu0WBFQN77gfNXH0XErgYXdceZvaMXajVz2H6NlSKSWZOVN/9ut5SLi3
 mt0rCwCsyahj92n8+hOjjZeFbDaPfPMCQ/8n9dnadhbBm9iz35fOKY+qIBHJMJ9a
 wPfZ2k3wu5DHs/2+ZjFNhlwrlURTp3RlcVQ7QWDcR1LM3Z4/lEkD8tAI/r8sR9gw
 rxzoBSaQzo/zscUmYo0jh1BoW2w0n+x/GfH70Pyz3iwZky3jwpdP0nRwnB4h+tnE
 wKlpa5K7RfaqUxZExFfGALmlkALtjQgiXPYbORHMsD6l6XwrOMCeyQismm1oo66m
 JBlsdXCms5aracYmWhXnVmTlBqGjAgYAxm62ap62uwlmULy4qUv6kFeW0fERn9NJ
 5bKgbrkcal/WkMBawQqtG03niRkykqpqFooZ95ubj4Lib4VM0BmEvFrREjgXO7AE
 jpLimYsT9ROE3YQJqyWyLYkmc2ShwWj70INTpz2viMtQ2blIRKvRVsxs976bHuwS
 mGsZtiiANjhT2bAUhN7bct2Cf13MtPXiuf0etcJbrNSAtoBIFk+3uRRKHH2rM+CK
 oKYjO+exPyuQ9nSOBg==
 =3aTV
 -----END PGP SIGNATURE-----

Merge tag 'loongarch-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson

Pull LoongArch updates from Huacai Chen:

 - Better backtraces for humanization

 - Relay BCE exceptions to userland as SIGSEGV

 - Provide kernel fpu functions

 - Optimize memory ops (memset/memcpy/memmove)

 - Optimize checksum and crc32(c) calculation

 - Add ARCH_HAS_FORTIFY_SOURCE selection

 - Add function error injection support

 - Add ftrace with direct call support

 - Add basic perf tools support

* tag 'loongarch-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (24 commits)
  tools/perf: Add basic support for LoongArch
  LoongArch: ftrace: Add direct call trampoline samples support
  LoongArch: ftrace: Add direct call support
  LoongArch: ftrace: Implement ftrace_find_callable_addr() to simplify code
  LoongArch: ftrace: Fix build error if DYNAMIC_FTRACE_WITH_REGS is not set
  LoongArch: ftrace: Abstract DYNAMIC_FTRACE_WITH_ARGS accesses
  LoongArch: Add support for function error injection
  LoongArch: Add ARCH_HAS_FORTIFY_SOURCE selection
  LoongArch: crypto: Add crc32 and crc32c hw acceleration
  LoongArch: Add checksum optimization for 64-bit system
  LoongArch: Optimize memory ops (memset/memcpy/memmove)
  LoongArch: Provide kernel fpu functions
  LoongArch: Relay BCE exceptions to userland as SIGSEGV with si_code=SEGV_BNDERR
  LoongArch: Tweak the BADV and CPUCFG.PRID lines in show_regs()
  LoongArch: Humanize the ESTAT line when showing registers
  LoongArch: Humanize the ECFG line when showing registers
  LoongArch: Humanize the EUEN line when showing registers
  LoongArch: Humanize the PRMD line when showing registers
  LoongArch: Humanize the CRMD line when showing registers
  LoongArch: Fix format of CSR lines during show_regs()
  ...
 2023-05-04 12:40:16 -07:00
Huacai Chen
2fa5ebe3bc tools/perf: Add basic support for LoongArch 
Add basic support for LoongArch, which is very similar to the MIPS
version.

Signed-off-by: Ming Wang <wangming01@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
 2023-05-01 17:19:59 +08:00
Linus Torvalds
2aff7c706c Objtool changes for v6.4: 
- Mark arch_cpu_idle_dead() __noreturn, make all architectures & drivers that did
    this inconsistently follow this new, common convention, and fix all the fallout
    that objtool can now detect statically.
 
  - Fix/improve the ORC unwinder becoming unreliable due to UNWIND_HINT_EMPTY ambiguity,
    split it into UNWIND_HINT_END_OF_STACK and UNWIND_HINT_UNDEFINED to resolve it.
 
  - Fix noinstr violations in the KCSAN code and the lkdtm/stackleak code.
 
  - Generate ORC data for __pfx code
 
  - Add more __noreturn annotations to various kernel startup/shutdown/panic functions.
 
  - Misc improvements & fixes.
 
 Signed-off-by: Ingo Molnar <mingo@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmRK1x0RHG1pbmdvQGtl
 cm5lbC5vcmcACgkQEnMQ0APhK1ghxQ/+IkCynMYtdF5OG9YwbcGJqsPSfOPMEcEM
 pUSFYg+gGPBDT/fJfcVSqvUtdnWbLC2kXt9yiswXz3X3J2nmNkBk5YKQftsNDcul
 TmKeqIIAK51XTncpegKH0EGnOX63oZ9Vxa8CTPdDlb+YF23Km2FoudGRI9F5qbUd
 LoraXqGYeiaeySkGyWmZVl6Uc8dIxnMkTN3H/oI9aB6TOrsi059hAtFcSaFfyemP
 c4LqXXCH7k2baiQt+qaLZ8cuZVG/+K5r2N2cmjO5kmJc6ynIaFnfMe4XxZLjp5LT
 /PulYI15bXkvSARKx5CRh/CDHMOx5Blw+ASO0RhWbdy0WH4ZhhcaVF5AeIpPW86a
 1LBcz97rMp72WmvKgrJeVO1r9+ll4SI6/YKGJRsxsCMdP3hgFpqntXyVjTFNdTM1
 0gH6H5v55x06vJHvhtTk8SR3PfMTEM2fRU5jXEOrGowoGifx+wNUwORiwj6LE3KQ
 SKUdT19RNzoW3VkFxhgk65ThK1S7YsJUKRoac3YdhttpqqqtFV//erenrZoR4k/p
 vzvKy68EQ7RCNyD5wNWNFe0YjeJl5G8gQ8bUm4Xmab7djjgz+pn4WpQB8yYKJLAo
 x9dqQ+6eUbw3Hcgk6qQ9E+r/svbulnAL0AeALAWK/91DwnZ2mCzKroFkLN7napKi
 fRho4CqzrtM=
 =NwEV
 -----END PGP SIGNATURE-----

Merge tag 'objtool-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull objtool updates from Ingo Molnar:

 - Mark arch_cpu_idle_dead() __noreturn, make all architectures &
   drivers that did this inconsistently follow this new, common
   convention, and fix all the fallout that objtool can now detect
   statically

 - Fix/improve the ORC unwinder becoming unreliable due to
   UNWIND_HINT_EMPTY ambiguity, split it into UNWIND_HINT_END_OF_STACK
   and UNWIND_HINT_UNDEFINED to resolve it

 - Fix noinstr violations in the KCSAN code and the lkdtm/stackleak code

 - Generate ORC data for __pfx code

 - Add more __noreturn annotations to various kernel startup/shutdown
   and panic functions

 - Misc improvements & fixes

* tag 'objtool-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits)
  x86/hyperv: Mark hv_ghcb_terminate() as noreturn
  scsi: message: fusion: Mark mpt_halt_firmware() __noreturn
  x86/cpu: Mark {hlt,resume}_play_dead() __noreturn
  btrfs: Mark btrfs_assertfail() __noreturn
  objtool: Include weak functions in global_noreturns check
  cpu: Mark nmi_panic_self_stop() __noreturn
  cpu: Mark panic_smp_self_stop() __noreturn
  arm64/cpu: Mark cpu_park_loop() and friends __noreturn
  x86/head: Mark *_start_kernel() __noreturn
  init: Mark start_kernel() __noreturn
  init: Mark [arch_call_]rest_init() __noreturn
  objtool: Generate ORC data for __pfx code
  x86/linkage: Fix padding for typed functions
  objtool: Separate prefix code from stack validation code
  objtool: Remove superfluous dead_end_function() check
  objtool: Add symbol iteration helpers
  objtool: Add WARN_INSN()
  scripts/objdump-func: Support multiple functions
  context_tracking: Fix KCSAN noinstr violation
  objtool: Add stackleak instrumentation to uaccess safe list
  ...
 2023-04-28 14:02:54 -07:00
Linus Torvalds
6e98b09da9 Networking changes for 6.4. 
Core
 ----
 
  - Introduce a config option to tweak MAX_SKB_FRAGS. Increasing the
    default value allows for better BIG TCP performances.
 
  - Reduce compound page head access for zero-copy data transfers.
 
  - RPS/RFS improvements, avoiding unneeded NET_RX_SOFTIRQ when possible.
 
  - Threaded NAPI improvements, adding defer skb free support and unneeded
    softirq avoidance.
 
  - Address dst_entry reference count scalability issues, via false
    sharing avoidance and optimize refcount tracking.
 
  - Add lockless accesses annotation to sk_err[_soft].
 
  - Optimize again the skb struct layout.
 
  - Extends the skb drop reasons to make it usable by multiple
    subsystems.
 
  - Better const qualifier awareness for socket casts.
 
 BPF
 ---
 
  - Add skb and XDP typed dynptrs which allow BPF programs for more
    ergonomic and less brittle iteration through data and variable-sized
    accesses.
 
  - Add a new BPF netfilter program type and minimal support to hook
    BPF programs to netfilter hooks such as prerouting or forward.
 
  - Add more precise memory usage reporting for all BPF map types.
 
  - Adds support for using {FOU,GUE} encap with an ipip device operating
    in collect_md mode and add a set of BPF kfuncs for controlling encap
    params.
 
  - Allow BPF programs to detect at load time whether a particular kfunc
    exists or not, and also add support for this in light skeleton.
 
  - Bigger batch of BPF verifier improvements to prepare for upcoming BPF
    open-coded iterators allowing for less restrictive looping capabilities.
 
  - Rework RCU enforcement in the verifier, add kptr_rcu and enforce BPF
    programs to NULL-check before passing such pointers into kfunc.
 
  - Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and in
    local storage maps.
 
  - Enable RCU semantics for task BPF kptrs and allow referenced kptr
    tasks to be stored in BPF maps.
 
  - Add support for refcounted local kptrs to the verifier for allowing
    shared ownership, useful for adding a node to both the BPF list and
    rbtree.
 
  - Add BPF verifier support for ST instructions in convert_ctx_access()
    which will help new -mcpu=v4 clang flag to start emitting them.
 
  - Add ARM32 USDT support to libbpf.
 
  - Improve bpftool's visual program dump which produces the control
    flow graph in a DOT format by adding C source inline annotations.
 
 Protocols
 ---------
 
  - IPv4: Allow adding to IPv4 address a 'protocol' tag. Such value
    indicates the provenance of the IP address.
 
  - IPv6: optimize route lookup, dropping unneeded R/W lock acquisition.
 
  - Add the handshake upcall mechanism, allowing the user-space
    to implement generic TLS handshake on kernel's behalf.
 
  - Bridge: support per-{Port, VLAN} neighbor suppression, increasing
    resilience to nodes failures.
 
  - SCTP: add support for Fair Capacity and Weighted Fair Queueing
    schedulers.
 
  - MPTCP: delay first subflow allocation up to its first usage. This
    will allow for later better LSM interaction.
 
  - xfrm: Remove inner/outer modes from input/output path. These are
    not needed anymore.
 
  - WiFi:
    - reduced neighbor report (RNR) handling for AP mode
    - HW timestamping support
    - support for randomized auth/deauth TA for PASN privacy
    - per-link debugfs for multi-link
    - TC offload support for mac80211 drivers
    - mac80211 mesh fast-xmit and fast-rx support
    - enable Wi-Fi 7 (EHT) mesh support
 
 Netfilter
 ---------
 
  - Add nf_tables 'brouting' support, to force a packet to be routed
    instead of being bridged.
 
  - Update bridge netfilter and ovs conntrack helpers to handle
    IPv6 Jumbo packets properly, i.e. fetch the packet length
    from hop-by-hop extension header. This is needed for BIT TCP
    support.
 
  - The iptables 32bit compat interface isn't compiled in by default
    anymore.
 
  - Move ip(6)tables builtin icmp matches to the udptcp one.
    This has the advantage that icmp/icmpv6 match doesn't load the
    iptables/ip6tables modules anymore when iptables-nft is used.
 
  - Extended netlink error report for netdevice in flowtables and
    netdev/chains. Allow for incrementally add/delete devices to netdev
    basechain. Allow to create netdev chain without device.
 
 Driver API
 ----------
 
  - Remove redundant Device Control Error Reporting Enable, as PCI core
    has already error reporting enabled at enumeration time.
 
  - Move Multicast DB netlink handlers to core, allowing devices other
    then bridge to use them.
 
  - Allow the page_pool to directly recycle the pages from safely
    localized NAPI.
 
  - Implement lockless TX queue stop/wake combo macros, allowing for
    further code de-duplication and sanitization.
 
  - Add YNL support for user headers and struct attrs.
 
  - Add partial YNL specification for devlink.
 
  - Add partial YNL specification for ethtool.
 
  - Add tc-mqprio and tc-taprio support for preemptible traffic classes.
 
  - Add tx push buf len param to ethtool, specifies the maximum number
    of bytes of a transmitted packet a driver can push directly to the
    underlying device.
 
  - Add basic LED support for switch/phy.
 
  - Add NAPI documentation, stop relaying on external links.
 
  - Convert dsa_master_ioctl() to netdev notifier. This is a preparatory
    work to make the hardware timestamping layer selectable by user
    space.
 
  - Add transceiver support and improve the error messages for CAN-FD
    controllers.
 
 New hardware / drivers
 ----------------------
 
  - Ethernet:
    - AMD/Pensando core device support
    - MediaTek MT7981 SoC
    - MediaTek MT7988 SoC
    - Broadcom BCM53134 embedded switch
    - Texas Instruments CPSW9G ethernet switch
    - Qualcomm EMAC3 DWMAC ethernet
    - StarFive JH7110 SoC
    - NXP CBTX ethernet PHY
 
  - WiFi:
    - Apple M1 Pro/Max devices
    - RealTek rtl8710bu/rtl8188gu
    - RealTek rtl8822bs, rtl8822cs and rtl8821cs SDIO chipset
 
  - Bluetooth:
    - Realtek RTL8821CS, RTL8851B, RTL8852BS
    - Mediatek MT7663, MT7922
    - NXP w8997
    - Actions Semi ATS2851
    - QTI WCN6855
    - Marvell 88W8997
 
  - Can:
    - STMicroelectronics bxcan stm32f429
 
 Drivers
 -------
  - Ethernet NICs:
    - Intel (1G, icg):
      - add tracking and reporting of QBV config errors.
      - add support for configuring max SDU for each Tx queue.
    - Intel (100G, ice):
      - refactor mailbox overflow detection to support Scalable IOV
      - GNSS interface optimization
    - Intel (i40e):
      - support XDP multi-buffer
    - nVidia/Mellanox:
      - add the support for linux bridge multicast offload
      - enable TC offload for egress and engress MACVLAN over bond
      - add support for VxLAN GBP encap/decap flows offload
      - extend packet offload to fully support libreswan
      - support tunnel mode in mlx5 IPsec packet offload
      - extend XDP multi-buffer support
      - support MACsec VLAN offload
      - add support for dynamic msix vectors allocation
      - drop RX page_cache and fully use page_pool
      - implement thermal zone to report NIC temperature
    - Netronome/Corigine:
      - add support for multi-zone conntrack offload
    - Solarflare/Xilinx:
      - support offloading TC VLAN push/pop actions to the MAE
      - support TC decap rules
      - support unicast PTP
 
  - Other NICs:
    - Broadcom (bnxt): enforce software based freq adjustments only
 		on shared PHC NIC
    - RealTek (r8169): refactor to addess ASPM issues during NAPI poll.
    - Micrel (lan8841): add support for PTP_PF_PEROUT
    - Cadence (macb): enable PTP unicast
    - Engleder (tsnep): add XDP socket zero-copy support
    - virtio-net: implement exact header length guest feature
    - veth: add page_pool support for page recycling
    - vxlan: add MDB data path support
    - gve: add XDP support for GQI-QPL format
    - geneve: accept every ethertype
    - macvlan: allow some packets to bypass broadcast queue
    - mana: add support for jumbo frame
 
  - Ethernet high-speed switches:
    - Microchip (sparx5): Add support for TC flower templates.
 
  - Ethernet embedded switches:
    - Broadcom (b54):
      - configure 6318 and 63268 RGMII ports
    - Marvell (mv88e6xxx):
      - faster C45 bus scan
    - Microchip:
      - lan966x:
        - add support for IS1 VCAP
        - better TX/RX from/to CPU performances
      - ksz9477: add ETS Qdisc support
      - ksz8: enhance static MAC table operations and error handling
      - sama7g5: add PTP capability
    - NXP (ocelot):
      - add support for external ports
      - add support for preemptible traffic classes
    - Texas Instruments:
      - add CPSWxG SGMII support for J7200 and J721E
 
  - Intel WiFi (iwlwifi):
    - preparation for Wi-Fi 7 EHT and multi-link support
    - EHT (Wi-Fi 7) sniffer support
    - hardware timestamping support for some devices/firwmares
    - TX beacon protection on newer hardware
 
  - Qualcomm 802.11ax WiFi (ath11k):
    - MU-MIMO parameters support
    - ack signal support for management packets
 
  - RealTek WiFi (rtw88):
    - SDIO bus support
    - better support for some SDIO devices
      (e.g. MAC address from efuse)
 
  - RealTek WiFi (rtw89):
    - HW scan support for 8852b
    - better support for 6 GHz scanning
    - support for various newer firmware APIs
    - framework firmware backwards compatibility
 
  - MediaTek WiFi (mt76):
    - P2P support
    - mesh A-MSDU support
    - EHT (Wi-Fi 7) support
    - coredump support
 
 Signed-off-by: Paolo Abeni <pabeni@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEEg1AjqC77wbdLX2LbKSR5jcyPE6QFAmRI/mUSHHBhYmVuaUBy
 ZWRoYXQuY29tAAoJECkkeY3MjxOkgO0QAJGxpuN67YgYV0BIM+/atWKEEexJYG7B
 9MMpU4jMO3EW/pUS5t7VRsBLUybLYVPmqCZoHodObDfnu59jiPOegb6SikJv/ZwJ
 Zw62PVk5MvDnQjlu4e6kDcGwkplteN08TlgI+a49BUTedpdFitrxHAYGW8f2fRO6
 cK2XSld+ZucMoym5vRwf8yWS1BwdxnslPMxDJ+/8ZbWBZv44qAnG2vMB/kIx7ObC
 Vel/4m6MzTwVsLYBsRvcwMVbNNlZ9GuhztlTzEbfGA4ZhTadIAMgb5VTWXB84Ws7
 Aic5wTdli+q+x6/2cxhbyeoVuB9HHObYmLBAciGg4GNljP5rnQBY3X3+KVZ/x9TI
 HQB7CmhxmAZVrO9pLARFV+ECrMTH2/dy3NyrZ7uYQ3WPOXJi8hJZjOTO/eeEGL7C
 eTjdz0dZBWIBK2gON/6s4nExXVQUTEF2ZsPi52jTTClKjfe5pz/ddeFQIWaY1DTm
 pInEiWPAvd28JyiFmhFNHsuIBCjX/Zqe2JuMfMBeBibDAC09o/OGdKJYUI15AiRf
 F46Pdb7use/puqfrYW44kSAfaPYoBiE+hj1RdeQfen35xD9HVE4vdnLNeuhRlFF9
 aQfyIRHYQofkumRDr5f8JEY66cl9NiKQ4IVW1xxQfYDNdC6wQqREPG1md7rJVMrJ
 vP7ugFnttneg
 =ITVa
 -----END PGP SIGNATURE-----

Merge tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Paolo Abeni:
 "Core:

   - Introduce a config option to tweak MAX_SKB_FRAGS. Increasing the
     default value allows for better BIG TCP performances

   - Reduce compound page head access for zero-copy data transfers

   - RPS/RFS improvements, avoiding unneeded NET_RX_SOFTIRQ when
     possible

   - Threaded NAPI improvements, adding defer skb free support and
     unneeded softirq avoidance

   - Address dst_entry reference count scalability issues, via false
     sharing avoidance and optimize refcount tracking

   - Add lockless accesses annotation to sk_err[_soft]

   - Optimize again the skb struct layout

   - Extends the skb drop reasons to make it usable by multiple
     subsystems

   - Better const qualifier awareness for socket casts

  BPF:

   - Add skb and XDP typed dynptrs which allow BPF programs for more
     ergonomic and less brittle iteration through data and
     variable-sized accesses

   - Add a new BPF netfilter program type and minimal support to hook
     BPF programs to netfilter hooks such as prerouting or forward

   - Add more precise memory usage reporting for all BPF map types

   - Adds support for using {FOU,GUE} encap with an ipip device
     operating in collect_md mode and add a set of BPF kfuncs for
     controlling encap params

   - Allow BPF programs to detect at load time whether a particular
     kfunc exists or not, and also add support for this in light
     skeleton

   - Bigger batch of BPF verifier improvements to prepare for upcoming
     BPF open-coded iterators allowing for less restrictive looping
     capabilities

   - Rework RCU enforcement in the verifier, add kptr_rcu and enforce
     BPF programs to NULL-check before passing such pointers into kfunc

   - Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and
     in local storage maps

   - Enable RCU semantics for task BPF kptrs and allow referenced kptr
     tasks to be stored in BPF maps

   - Add support for refcounted local kptrs to the verifier for allowing
     shared ownership, useful for adding a node to both the BPF list and
     rbtree

   - Add BPF verifier support for ST instructions in
     convert_ctx_access() which will help new -mcpu=v4 clang flag to
     start emitting them

   - Add ARM32 USDT support to libbpf

   - Improve bpftool's visual program dump which produces the control
     flow graph in a DOT format by adding C source inline annotations

  Protocols:

   - IPv4: Allow adding to IPv4 address a 'protocol' tag. Such value
     indicates the provenance of the IP address

   - IPv6: optimize route lookup, dropping unneeded R/W lock acquisition

   - Add the handshake upcall mechanism, allowing the user-space to
     implement generic TLS handshake on kernel's behalf

   - Bridge: support per-{Port, VLAN} neighbor suppression, increasing
     resilience to nodes failures

   - SCTP: add support for Fair Capacity and Weighted Fair Queueing
     schedulers

   - MPTCP: delay first subflow allocation up to its first usage. This
     will allow for later better LSM interaction

   - xfrm: Remove inner/outer modes from input/output path. These are
     not needed anymore

   - WiFi:
      - reduced neighbor report (RNR) handling for AP mode
      - HW timestamping support
      - support for randomized auth/deauth TA for PASN privacy
      - per-link debugfs for multi-link
      - TC offload support for mac80211 drivers
      - mac80211 mesh fast-xmit and fast-rx support
      - enable Wi-Fi 7 (EHT) mesh support

  Netfilter:

   - Add nf_tables 'brouting' support, to force a packet to be routed
     instead of being bridged

   - Update bridge netfilter and ovs conntrack helpers to handle IPv6
     Jumbo packets properly, i.e. fetch the packet length from
     hop-by-hop extension header. This is needed for BIT TCP support

   - The iptables 32bit compat interface isn't compiled in by default
     anymore

   - Move ip(6)tables builtin icmp matches to the udptcp one. This has
     the advantage that icmp/icmpv6 match doesn't load the
     iptables/ip6tables modules anymore when iptables-nft is used

   - Extended netlink error report for netdevice in flowtables and
     netdev/chains. Allow for incrementally add/delete devices to netdev
     basechain. Allow to create netdev chain without device

  Driver API:

   - Remove redundant Device Control Error Reporting Enable, as PCI core
     has already error reporting enabled at enumeration time

   - Move Multicast DB netlink handlers to core, allowing devices other
     then bridge to use them

   - Allow the page_pool to directly recycle the pages from safely
     localized NAPI

   - Implement lockless TX queue stop/wake combo macros, allowing for
     further code de-duplication and sanitization

   - Add YNL support for user headers and struct attrs

   - Add partial YNL specification for devlink

   - Add partial YNL specification for ethtool

   - Add tc-mqprio and tc-taprio support for preemptible traffic classes

   - Add tx push buf len param to ethtool, specifies the maximum number
     of bytes of a transmitted packet a driver can push directly to the
     underlying device

   - Add basic LED support for switch/phy

   - Add NAPI documentation, stop relaying on external links

   - Convert dsa_master_ioctl() to netdev notifier. This is a
     preparatory work to make the hardware timestamping layer selectable
     by user space

   - Add transceiver support and improve the error messages for CAN-FD
     controllers

  New hardware / drivers:

   - Ethernet:
      - AMD/Pensando core device support
      - MediaTek MT7981 SoC
      - MediaTek MT7988 SoC
      - Broadcom BCM53134 embedded switch
      - Texas Instruments CPSW9G ethernet switch
      - Qualcomm EMAC3 DWMAC ethernet
      - StarFive JH7110 SoC
      - NXP CBTX ethernet PHY

   - WiFi:
      - Apple M1 Pro/Max devices
      - RealTek rtl8710bu/rtl8188gu
      - RealTek rtl8822bs, rtl8822cs and rtl8821cs SDIO chipset

   - Bluetooth:
      - Realtek RTL8821CS, RTL8851B, RTL8852BS
      - Mediatek MT7663, MT7922
      - NXP w8997
      - Actions Semi ATS2851
      - QTI WCN6855
      - Marvell 88W8997

   - Can:
      - STMicroelectronics bxcan stm32f429

  Drivers:

   - Ethernet NICs:
      - Intel (1G, icg):
         - add tracking and reporting of QBV config errors
         - add support for configuring max SDU for each Tx queue
      - Intel (100G, ice):
         - refactor mailbox overflow detection to support Scalable IOV
         - GNSS interface optimization
      - Intel (i40e):
         - support XDP multi-buffer
      - nVidia/Mellanox:
         - add the support for linux bridge multicast offload
         - enable TC offload for egress and engress MACVLAN over bond
         - add support for VxLAN GBP encap/decap flows offload
         - extend packet offload to fully support libreswan
         - support tunnel mode in mlx5 IPsec packet offload
         - extend XDP multi-buffer support
         - support MACsec VLAN offload
         - add support for dynamic msix vectors allocation
         - drop RX page_cache and fully use page_pool
         - implement thermal zone to report NIC temperature
      - Netronome/Corigine:
         - add support for multi-zone conntrack offload
      - Solarflare/Xilinx:
         - support offloading TC VLAN push/pop actions to the MAE
         - support TC decap rules
         - support unicast PTP

   - Other NICs:
      - Broadcom (bnxt): enforce software based freq adjustments only on
        shared PHC NIC
      - RealTek (r8169): refactor to addess ASPM issues during NAPI poll
      - Micrel (lan8841): add support for PTP_PF_PEROUT
      - Cadence (macb): enable PTP unicast
      - Engleder (tsnep): add XDP socket zero-copy support
      - virtio-net: implement exact header length guest feature
      - veth: add page_pool support for page recycling
      - vxlan: add MDB data path support
      - gve: add XDP support for GQI-QPL format
      - geneve: accept every ethertype
      - macvlan: allow some packets to bypass broadcast queue
      - mana: add support for jumbo frame

   - Ethernet high-speed switches:
      - Microchip (sparx5): Add support for TC flower templates

   - Ethernet embedded switches:
      - Broadcom (b54):
         - configure 6318 and 63268 RGMII ports
      - Marvell (mv88e6xxx):
         - faster C45 bus scan
      - Microchip:
         - lan966x:
            - add support for IS1 VCAP
            - better TX/RX from/to CPU performances
         - ksz9477: add ETS Qdisc support
         - ksz8: enhance static MAC table operations and error handling
         - sama7g5: add PTP capability
      - NXP (ocelot):
         - add support for external ports
         - add support for preemptible traffic classes
      - Texas Instruments:
         - add CPSWxG SGMII support for J7200 and J721E

   - Intel WiFi (iwlwifi):
      - preparation for Wi-Fi 7 EHT and multi-link support
      - EHT (Wi-Fi 7) sniffer support
      - hardware timestamping support for some devices/firwmares
      - TX beacon protection on newer hardware

   - Qualcomm 802.11ax WiFi (ath11k):
      - MU-MIMO parameters support
      - ack signal support for management packets

   - RealTek WiFi (rtw88):
      - SDIO bus support
      - better support for some SDIO devices (e.g. MAC address from
        efuse)

   - RealTek WiFi (rtw89):
      - HW scan support for 8852b
      - better support for 6 GHz scanning
      - support for various newer firmware APIs
      - framework firmware backwards compatibility

   - MediaTek WiFi (mt76):
      - P2P support
      - mesh A-MSDU support
      - EHT (Wi-Fi 7) support
      - coredump support"

* tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2078 commits)
  net: phy: hide the PHYLIB_LEDS knob
  net: phy: marvell-88x2222: remove unnecessary (void*) conversions
  tcp/udp: Fix memleaks of sk and zerocopy skbs with TX timestamp.
  net: amd: Fix link leak when verifying config failed
  net: phy: marvell: Fix inconsistent indenting in led_blink_set
  lan966x: Don't use xdp_frame when action is XDP_TX
  tsnep: Add XDP socket zero-copy TX support
  tsnep: Add XDP socket zero-copy RX support
  tsnep: Move skb receive action to separate function
  tsnep: Add functions for queue enable/disable
  tsnep: Rework TX/RX queue initialization
  tsnep: Replace modulo operation with mask
  net: phy: dp83867: Add led_brightness_set support
  net: phy: Fix reading LED reg property
  drivers: nfc: nfcsim: remove return value check of `dev_dir`
  net: phy: dp83867: Remove unnecessary (void*) conversions
  net: ethtool: coalesce: try to make user settings stick twice
  net: mana: Check if netdev/napi_alloc_frag returns single page
  net: mana: Rename mana_refill_rxoob and remove some empty lines
  net: veth: add page_pool stats
  ...
 2023-04-26 16:07:23 -07:00
Linus Torvalds
4a4a28fca6 - Add a x86 hw vulnerabilities section to MAINTAINERS so that the folks 
involved in it can get CCed on patches
 
 - Add some more CPUID leafs to the kcpuid tool and extend its
   functionality to be more useful when grepping for CPUID bits
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmRGiuYACgkQEsHwGGHe
 VUoC2BAAsbtki6d4bds6uezRapz9RoOJUGHm4eY4drMCXe2Mz0myD8/jDV6kRKVb
 WWDlVEv9fxoTOHTCO7kazjrwm6wXt/MgZ51gyZx9/WyqlS27U1SCH9REHKKhzgCK
 OduHi741mfAXOZ1h0M3atpJvgaKzqqugVYX7whaGwVbPKAFT+DLu+lendzAe5sxv
 1WG1JIhfLf0Wn4aUX9E5N9wenyGOUWHgPbE/UBSKaxO6ySi+ut4Mn2fTKZ70Lyp1
 HoZMNns2RDknXD3dMcZG3ztPaLwsNoEgRkIjLolVFMnaK2L9DrVqP+6/7mCGc5er
 GHdFeDdtnHih9CNm4WOQtrbynrdEAM93A3u531JCpySmVSTG1j+pCTd0P020mscl
 It+jnVm1f0csY7/y7tUMnzzNsQRQQszTCfpiuXTZy5Ml7z68sLcDqJQfPwFZh6fX
 OqmplDxE127VvZESakDyFbhV600PF1aC6xRoM2pkjqKcL6uZ7JDh+s4KisMRGGGK
 i39PaCH+E0aJ0mIp9EvWKI7LXYot3DPUX1A+O4zjNnsnC4dNTLu34Hb8fdBxOUB0
 egqcPVDIY23ELwtzF2+f7rMZ3DufEAQ2O3YP/aVRo8didepYPJpbWb/JKvpnaYXR
 4Zp0gqUtKmJ6xvO0o3pECsm/Y5WmCYHKeo9CuggT6T8iTbEEedo=
 =hSYX
 -----END PGP SIGNATURE-----

Merge tag 'x86_misc_for_v6.4_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull misc x86 updates from Borislav Petkov:

 - Add a x86 hw vulnerabilities section to MAINTAINERS so that the folks
   involved in it can get CCed on patches

 - Add some more CPUID leafs to the kcpuid tool and extend its
   functionality to be more useful when grepping for CPUID bits

* tag 'x86_misc_for_v6.4_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  MAINTAINERS: Add x86 hardware vulnerabilities section
  tools/x86/kcpuid: Dump the CPUID function in detailed view
  tools/x86/kcpuid: Update AMD leaf Fn80000001
  tools/x86/kcpuid: Fix avx512bw and avx512lvl fields in Fn00000007
 2023-04-25 10:27:02 -07:00
Jakub Kicinski
681c5b51dc Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net 
Adjacent changes:

net/mptcp/protocol.h
  63740448a32e ("mptcp: fix accept vs worker race")
  2a6a870e44dd ("mptcp: stops worker on unaccepted sockets at listener close")
  ddb1a072f858 ("mptcp: move first subflow allocation at mpc access time")

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 2023-04-20 16:29:51 -07:00
Tiezhu Yang
b5533e990d tools/loongarch: Use __SIZEOF_LONG__ to define __BITS_PER_LONG 
Although __SIZEOF_POINTER__ is equal to _SIZEOF_LONG__ on LoongArch,
it is better to use __SIZEOF_LONG__ to define __BITS_PER_LONG to keep
consistent between arch/loongarch/include/uapi/asm/bitsperlong.h and
tools/arch/loongarch/include/uapi/asm/bitsperlong.h.

Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
 2023-04-19 12:07:34 +08:00
Tiezhu Yang
ece7f7c050 perf bench syscall: Add fork syscall benchmark 
This is a follow up patch for the execve bench which is actually
fork + execve, it makes sense to add the fork syscall benchmark
to compare the execve part precisely.

Some archs have no __NR_fork definition which is used only as a
check condition to call test_fork(), let us just define it as -1
to avoid build error.

Suggested-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: loongson-kernel@lists.loongnix.cn
Link: https://lore.kernel.org/r/1679381821-22736-1-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 2023-04-04 09:39:55 -03:00
Josh Poimboeuf
fb799447ae x86,objtool: Split UNWIND_HINT_EMPTY in two 
Mark reported that the ORC unwinder incorrectly marks an unwind as
reliable when the unwind terminates prematurely in the dark corners of
return_to_handler() due to lack of information about the next frame.

The problem is UNWIND_HINT_EMPTY is used in two different situations:

  1) The end of the kernel stack unwind before hitting user entry, boot
     code, or fork entry

  2) A blind spot in ORC coverage where the unwinder has to bail due to
     lack of information about the next frame

The ORC unwinder has no way to tell the difference between the two.
When it encounters an undefined stack state with 'end=1', it blindly
marks the stack reliable, which can break the livepatch consistency
model.

Fix it by splitting UNWIND_HINT_EMPTY into UNWIND_HINT_UNDEFINED and
UNWIND_HINT_END_OF_STACK.

Reported-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/fd6212c8b450d3564b855e1cb48404d6277b4d9f.1677683419.git.jpoimboe@kernel.org
 2023-03-23 23:18:58 +01:00
Josh Poimboeuf
f902cfdd46 x86,objtool: Introduce ORC_TYPE_* 
Unwind hints and ORC entry types are two distinct things.  Separate them
out more explicitly.

Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/cc879d38fff8a43f8f7beb2fd56e35a5a384d7cd.1677683419.git.jpoimboe@kernel.org
 2023-03-23 23:18:57 +01:00
Jakub Kicinski
1118aa4c70 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net 
net/wireless/nl80211.c
  b27f07c50a73 ("wifi: nl80211: fix puncturing bitmap policy")
  cbbaf2bb829b ("wifi: nl80211: add a command to enable/disable HW timestamping")
https://lore.kernel.org/all/20230314105421.3608efae@canb.auug.org.au

tools/testing/selftests/net/Makefile
  62199e3f1658 ("selftests: net: Add VXLAN MDB test")
  13715acf8ab5 ("selftest: Add test for bind() conflicts.")

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 2023-03-17 16:29:25 -07:00
Linus Torvalds
49be4fb281 perf tools fixes for v6.3: 
- Add Adrian Hunter to MAINTAINERS as a perf tools reviewer.
 
 - Sync various tools/ copies of kernel headers with the kernel sources, this
   time trying to avoid first merging with upstream to then update but instead
   copy from upstream so that a merge is avoided and the end result after merging
   this pull request is the one expected, tools/perf/check-headers.sh (mostly)
   happy, less warnings while building tools/perf/.
 
 - Fix counting when initial delay configured by setting
   perf_attr.enable_on_exec when starting workloads from the perf command line.
 
 - Don't avoid emitting a PERF_RECORD_MMAP2 in 'perf inject --buildid-all' when
   that record comes with a build-id, otherwise we end up not being able to
   resolve symbols.
 
 - Don't use comma as the CSV output separator the "stat+csv_output" test, as
   comma can appear on some tests as a modifier for an event, use @ instead,
   ditto for the JSON linter test.
 
 - The offcpu test was looking for some bits being set on
   task_struct->prev_state without masking other bits not important for this
   specific 'perf test', fix it.
 
 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCZApKjQAKCRCyPKLppCJ+
 JzdfAQDRnwDCxhb4cvx7lVR32L1XMIFW6qLWRBJWoxC2SJi6lgD/SoQgKswkxrJv
 XnBP7jEaIsh3M3ak82MxLKbjSAEvnwk=
 =jup7
 -----END PGP SIGNATURE-----

Merge tag 'perf-tools-fixes-for-v6.3-1-2023-03-09' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Add Adrian Hunter to MAINTAINERS as a perf tools reviewer

 - Sync various tools/ copies of kernel headers with the kernel sources,
   this time trying to avoid first merging with upstream to then update
   but instead copy from upstream so that a merge is avoided and the end
   result after merging this pull request is the one expected,
   tools/perf/check-headers.sh (mostly) happy, less warnings while
   building tools/perf/

 - Fix counting when initial delay configured by setting
   perf_attr.enable_on_exec when starting workloads from the perf
   command line

 - Don't avoid emitting a PERF_RECORD_MMAP2 in 'perf inject
   --buildid-all' when that record comes with a build-id, otherwise we
   end up not being able to resolve symbols

 - Don't use comma as the CSV output separator the "stat+csv_output"
   test, as comma can appear on some tests as a modifier for an event,
   use @ instead, ditto for the JSON linter test

 - The offcpu test was looking for some bits being set on
   task_struct->prev_state without masking other bits not important for
   this specific 'perf test', fix it

* tag 'perf-tools-fixes-for-v6.3-1-2023-03-09' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf tools: Add Adrian Hunter to MAINTAINERS as a reviewer
  tools headers UAPI: Sync linux/perf_event.h with the kernel sources
  tools headers x86 cpufeatures: Sync with the kernel sources
  tools include UAPI: Sync linux/vhost.h with the kernel sources
  tools arch x86: Sync the msr-index.h copy with the kernel sources
  tools headers kvm: Sync uapi/{asm/linux} kvm.h headers with the kernel sources
  tools include UAPI: Synchronize linux/fcntl.h with the kernel sources
  tools headers: Synchronize {linux,vdso}/bits.h with the kernel sources
  tools headers UAPI: Sync linux/prctl.h with the kernel sources
  tools headers: Update the copy of x86's mem{cpy,set}_64.S used in 'perf bench'
  perf stat: Fix counting when initial delay configured
  tools headers svm: Sync svm headers with the kernel sources
  perf test: Avoid counting commas in json linter
  perf tests stat+csv_output: Switch CSV separator to @
  perf inject: Fix --buildid-all not to eat up MMAP2
  tools arch x86: Sync the msr-index.h copy with the kernel sources
  perf test: Fix offcpu test prev_state check
 2023-03-10 08:18:46 -08:00
Jakub Kicinski
d0ddf5065f Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net 
Documentation/bpf/bpf_devel_QA.rst
  b7abcd9c656b ("bpf, doc: Link to submitting-patches.rst for general patch submission info")
  d56b0c461d19 ("bpf, docs: Fix link to netdev-FAQ target")
https://lore.kernel.org/all/20230307095812.236eb1be@canb.auug.org.au/

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 2023-03-09 22:22:11 -08:00
Borislav Petkov (AMD)
cd3ad66195 tools/x86/kcpuid: Dump the CPUID function in detailed view 
Sometimes it is useful to know which CPUID leaf contains the fields so
add it to -d output so that it looks like this:

  CPUID_0x8000001e_ECX[0x0]:
           extended_apic_id       : 0x8           - Extended APIC ID
           core_id                : 0x4           - Identifies the logical core ID
           threads_per_core       : 0x1           - The number of threads per core is threads_per_core + 1
           node_id                : 0x0           - Node ID
           nodes_per_processor    : 0x0           - Nodes per processor { 0: 1 node, else reserved }

  CPUID_0x8000001f_ECX[0x0]:
           sme                 -  Secure Memory Encryption

...

Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Reviewed-by: Feng Tang <feng.tang@intel.com>
Link: https://lore.kernel.org/r/20230206141832.4162264-4-terry.bowman@amd.com
 2023-03-07 23:35:44 +01:00
Terry Bowman
ce22e4346f tools/x86/kcpuid: Update AMD leaf Fn80000001 
Add missing features to sub-leafs EAX, ECX, and EDX of 'Extended
Processor Signature and Feature Bits' leaf Fn80000001.

Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Feng Tang <feng.tang@intel.com>
Link: https://lore.kernel.org/r/20230206141832.4162264-3-terry.bowman@amd.com
 2023-03-07 23:29:07 +01:00
Terry Bowman
4e347bdf44 tools/x86/kcpuid: Fix avx512bw and avx512lvl fields in Fn00000007 
Leaf Fn00000007 contains avx512bw at bit 26 and avx512vl at bit 28. This
is incorrect per the SDM. Correct avx512bw to be bit 30 and avx512lvl to
be bit 31.

Fixes: c6b2f240bf8d ("tools/x86: Add a kcpuid tool to show raw CPU features")
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Feng Tang <feng.tang@intel.com>
Link: https://lore.kernel.org/r/20230206141832.4162264-2-terry.bowman@amd.com
 2023-03-07 23:27:07 +01:00
Jakub Kicinski
36e5e391a2 bpf-next-for-netdev 
-----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZAZsBwAKCRDbK58LschI
 g3W1AQCQnO6pqqX5Q2aYDAZPlZRtV2TRLjuqrQE0dHW/XLAbBgD/bgsAmiKhPSCG
 2mTt6izpTQVlZB0e8KcDIvbYd9CE3Qc=
 =EjJQ
 -----END PGP SIGNATURE-----

Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

Daniel Borkmann says:

====================
pull-request: bpf-next 2023-03-06

We've added 85 non-merge commits during the last 13 day(s) which contain
a total of 131 files changed, 7102 insertions(+), 1792 deletions(-).

The main changes are:

1) Add skb and XDP typed dynptrs which allow BPF programs for more
   ergonomic and less brittle iteration through data and variable-sized
   accesses, from Joanne Koong.

2) Bigger batch of BPF verifier improvements to prepare for upcoming BPF
   open-coded iterators allowing for less restrictive looping capabilities,
   from Andrii Nakryiko.

3) Rework RCU enforcement in the verifier, add kptr_rcu and enforce BPF
   programs to NULL-check before passing such pointers into kfunc,
   from Alexei Starovoitov.

4) Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and in
   local storage maps, from Kumar Kartikeya Dwivedi.

5) Add BPF verifier support for ST instructions in convert_ctx_access()
   which will help new -mcpu=v4 clang flag to start emitting them,
   from Eduard Zingerman.

6) Make uprobe attachment Android APK aware by supporting attachment
   to functions inside ELF objects contained in APKs via function names,
   from Daniel Müller.

7) Add a new flag BPF_F_TIMER_ABS flag for bpf_timer_start() helper
   to start the timer with absolute expiration value instead of relative
   one, from Tero Kristo.

8) Add a new kfunc bpf_cgroup_from_id() to look up cgroups via id,
   from Tejun Heo.

9) Extend libbpf to support users manually attaching kprobes/uprobes
   in the legacy/perf/link mode, from Menglong Dong.

10) Implement workarounds in the mips BPF JIT for DADDI/R4000,
   from Jiaxun Yang.

11) Enable mixing bpf2bpf and tailcalls for the loongarch BPF JIT,
    from Hengqi Chen.

12) Extend BPF instruction set doc with describing the encoding of BPF
    instructions in terms of how bytes are stored under big/little endian,
    from Jose E. Marchesi.

13) Follow-up to enable kfunc support for riscv BPF JIT, from Pu Lehui.

14) Fix bpf_xdp_query() backwards compatibility on old kernels,
    from Yonghong Song.

15) Fix BPF selftest cross compilation with CLANG_CROSS_FLAGS,
    from Florent Revest.

16) Improve bpf_cpumask_ma to only allocate one bpf_mem_cache,
    from Hou Tao.

17) Fix BPF verifier's check_subprogs to not unnecessarily mark
    a subprogram with has_tail_call, from Ilya Leoshkevich.

18) Fix arm syscall regs spec in libbpf's bpf_tracing.h, from Puranjay Mohan.

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (85 commits)
  selftests/bpf: Add test for legacy/perf kprobe/uprobe attach mode
  selftests/bpf: Split test_attach_probe into multi subtests
  libbpf: Add support to set kprobe/uprobe attach mode
  tools/resolve_btfids: Add /libsubcmd to .gitignore
  bpf: add support for fixed-size memory pointer returns for kfuncs
  bpf: generalize dynptr_get_spi to be usable for iters
  bpf: mark PTR_TO_MEM as non-null register type
  bpf: move kfunc_call_arg_meta higher in the file
  bpf: ensure that r0 is marked scratched after any function call
  bpf: fix visit_insn()'s detection of BPF_FUNC_timer_set_callback helper
  bpf: clean up visit_insn()'s instruction processing
  selftests/bpf: adjust log_fixup's buffer size for proper truncation
  bpf: honor env->test_state_freq flag in is_state_visited()
  selftests/bpf: enhance align selftest's expected log matching
  bpf: improve regsafe() checks for PTR_TO_{MEM,BUF,TP_BUFFER}
  bpf: improve stack slot state printing
  selftests/bpf: Disassembler tests for verifier.c:convert_ctx_access()
  selftests/bpf: test if pointer type is tracked for BPF_ST_MEM
  bpf: allow ctx writes using BPF_ST_MEM instruction
  bpf: Use separate RCU callbacks for freeing selem
  ...
====================

Link: https://lore.kernel.org/r/20230307004346.27578-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 2023-03-06 20:36:39 -08:00
Arnaldo Carvalho de Melo
7d0930647c tools headers x86 cpufeatures: Sync with the kernel sources 
To pick the changes from:

  8415a74852d7c247 ("x86/cpu, kvm: Add support for CPUID_80000021_EAX")

This only causes these perf files to be rebuilt:

  CC       /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o
  CC       /tmp/build/perf/bench/mem-memset-x86-64-asm.o

And addresses these perf build warnings:

  Warning: Kernel ABI header at 'tools/arch/x86/include/asm/disabled-features.h' differs from latest version at 'arch/x86/include/asm/disabled-features.h'
  diff -u tools/arch/x86/include/asm/disabled-features.h arch/x86/include/asm/disabled-features.h
  Warning: Kernel ABI header at 'tools/arch/x86/include/asm/required-features.h' differs from latest version at 'arch/x86/include/asm/required-features.h'
  diff -u tools/arch/x86/include/asm/required-features.h arch/x86/include/asm/required-features.h

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/ZAYlS2XTJ5hRtss7@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 2023-03-06 14:42:12 -03:00
Arnaldo Carvalho de Melo
3ee7cb4fdf tools arch x86: Sync the msr-index.h copy with the kernel sources 
To pick up the changes in:

  e7862eda309ecfcc ("x86/cpu: Support AMD Automatic IBRS")
  0125acda7d76b943 ("x86/bugs: Reset speculation control settings on init")
  38aaf921e92dc5cf ("perf/x86: Add Meteor Lake support")
  5b6fac3fa44bafee ("x86/resctrl: Detect and configure Slow Memory Bandwidth Allocation")
  dc2a3e857981f859 ("x86/resctrl: Add interface to read mbm_total_bytes_config")

Addressing these tools/perf build warnings:

    diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h
    Warning: Kernel ABI header at 'tools/arch/x86/include/asm/msr-index.h' differs from latest version at 'arch/x86/include/asm/msr-index.h'

That makes the beautification scripts to pick some new entries:

  $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > before
  $ cp arch/x86/include/asm/msr-index.h tools/arch/x86/include/asm/msr-index.h
  $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > after
  $ diff -u before after
  --- before    2023-03-03 18:26:51.766923522 -0300
  +++ after     2023-03-03 18:27:09.987415481 -0300
  @@ -267,9 +267,11 @@
        [0xc000010e - x86_64_specific_MSRs_offset] = "AMD64_LBR_SELECT",
        [0xc000010f - x86_64_specific_MSRs_offset] = "AMD_DBG_EXTN_CFG",
        [0xc0000200 - x86_64_specific_MSRs_offset] = "IA32_MBA_BW_BASE",
  +     [0xc0000280 - x86_64_specific_MSRs_offset] = "IA32_SMBA_BW_BASE",
        [0xc0000300 - x86_64_specific_MSRs_offset] = "AMD64_PERF_CNTR_GLOBAL_STATUS",
        [0xc0000301 - x86_64_specific_MSRs_offset] = "AMD64_PERF_CNTR_GLOBAL_CTL",
        [0xc0000302 - x86_64_specific_MSRs_offset] = "AMD64_PERF_CNTR_GLOBAL_STATUS_CLR",
  +     [0xc0000400 - x86_64_specific_MSRs_offset] = "IA32_EVT_CFG_BASE",
   };

   #define x86_AMD_V_KVM_MSRs_offset 0xc0010000
  $

Now one can trace systemwide asking to see backtraces to where that MSR
is being read/written, see this example with a previous update:

  # perf trace -e msr:*_msr/max-stack=32/ --filter="msr>=IA32_U_CET && msr<=IA32_INT_SSP_TAB"
  ^C#

If we use -v (verbose mode) we can see what it does behind the scenes:

  # perf trace -v -e msr:*_msr/max-stack=32/ --filter="msr>=IA32_U_CET && msr<=IA32_INT_SSP_TAB"
  Using CPUID AuthenticAMD-25-21-0
  0x6a0
  0x6a8
  New filter for msr:read_msr: (msr>=0x6a0 && msr<=0x6a8) && (common_pid != 597499 && common_pid != 3313)
  0x6a0
  0x6a8
  New filter for msr:write_msr: (msr>=0x6a0 && msr<=0x6a8) && (common_pid != 597499 && common_pid != 3313)
  mmap size 528384B
  ^C#

Example with a frequent msr:

  # perf trace -v -e msr:*_msr/max-stack=32/ --filter="msr==IA32_SPEC_CTRL" --max-events 2
  Using CPUID AuthenticAMD-25-21-0
  0x48
  New filter for msr:read_msr: (msr==0x48) && (common_pid != 2612129 && common_pid != 3841)
  0x48
  New filter for msr:write_msr: (msr==0x48) && (common_pid != 2612129 && common_pid != 3841)
  mmap size 528384B
  Looking at the vmlinux_path (8 entries long)
  symsrc__init: build id mismatch for vmlinux.
  Using /proc/kcore for kernel data
  Using /proc/kallsyms for symbols
     0.000 Timer/2525383 msr:write_msr(msr: IA32_SPEC_CTRL, val: 6)
                                       do_trace_write_msr ([kernel.kallsyms])
                                       do_trace_write_msr ([kernel.kallsyms])
                                       __switch_to_xtra ([kernel.kallsyms])
                                       __switch_to ([kernel.kallsyms])
                                       __schedule ([kernel.kallsyms])
                                       schedule ([kernel.kallsyms])
                                       futex_wait_queue_me ([kernel.kallsyms])
                                       futex_wait ([kernel.kallsyms])
                                       do_futex ([kernel.kallsyms])
                                       __x64_sys_futex ([kernel.kallsyms])
                                       do_syscall_64 ([kernel.kallsyms])
                                       entry_SYSCALL_64_after_hwframe ([kernel.kallsyms])
                                       __futex_abstimed_wait_common64 (/usr/lib64/libpthread-2.33.so)
     0.030 :0/0 msr:write_msr(msr: IA32_SPEC_CTRL, val: 2)
                                       do_trace_write_msr ([kernel.kallsyms])
                                       do_trace_write_msr ([kernel.kallsyms])
                                       __switch_to_xtra ([kernel.kallsyms])
                                       __switch_to ([kernel.kallsyms])
                                       __schedule ([kernel.kallsyms])
                                       schedule_idle ([kernel.kallsyms])
                                       do_idle ([kernel.kallsyms])
                                       cpu_startup_entry ([kernel.kallsyms])
                                       secondary_startup_64_no_verify ([kernel.kallsyms])
    #

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Babu Moger <babu.moger@amd.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Breno Leitao <leitao@debian.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nikunj A Dadhania <nikunj@amd.com>
Link: https://lore.kernel.org/lkml/ZAJoaZ41+rU5H0vL@kernel.org
[ I had published the perf-tools branch before with the sync with ]
[ 8c29f01654053258 ("x86/sev: Add SEV-SNP guest feature negotiation support") ]
[ I removed it from this new sync ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 2023-03-03 23:24:11 -03:00
Arnaldo Carvalho de Melo
33c53f9b5a tools headers kvm: Sync uapi/{asm/linux} kvm.h headers with the kernel sources 
To pick up the changes in:

  89b0e7de3451a17f ("KVM: arm64: nv: Introduce nested virtualization VCPU feature")
  14329b825ffb7f27 ("KVM: x86/pmu: Introduce masked events to the pmu event filter")
  6213b701a9df0472 ("KVM: x86: Replace 0-length arrays with flexible arrays")
  3fd49805d19d1c56 ("KVM: s390: Extend MEM_OP ioctl by storage key checked cmpxchg")
  14329b825ffb7f27 ("KVM: x86/pmu: Introduce masked events to the pmu event filter")

That don't change functionality in tools/perf, as no new ioctl is added
for the 'perf trace' scripts to harvest.

This addresses these perf build warnings:

  Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h'
  diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
  Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/kvm.h' differs from latest version at 'arch/x86/include/uapi/asm/kvm.h'
  diff -u tools/arch/x86/include/uapi/asm/kvm.h arch/x86/include/uapi/asm/kvm.h
  Warning: Kernel ABI header at 'tools/arch/arm64/include/uapi/asm/kvm.h' differs from latest version at 'arch/arm64/include/uapi/asm/kvm.h'
  diff -u tools/arch/arm64/include/uapi/asm/kvm.h arch/arm64/include/uapi/asm/kvm.h

Cc: Aaron Lewis <aaronlewis@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Christoffer Dall <christoffer.dall@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Cc: Janosch Frank <frankja@linux.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kees Kook <keescook@chromium.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/lkml/ZAJlg7%2FfWDVGX0F3@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 2023-03-03 23:24:10 -03:00